summaryrefslogtreecommitdiffstats
path: root/arch/x86/kernel/apic_64.c
AgeCommit message (Collapse)AuthorFilesLines
2007-10-14x86: force timer broadcast on late AMD C1E detectionThomas Gleixner1-0/+26
The 64bit SMP bootup is slightly different to the 32bit one. It enables the boot CPU local APIC timer before all CPUs are brought up. Some AMD C1E systems have the C1E feature flag only set in the secondary CPU. Due to the early enable of the boot CPU local APIC timer the APIC timer is registered as a fully functional device. When we detect the wreckage during the bringup of the secondary CPU, we need to force the boot CPU into broadcast mode. Check the C1E caused APIC timer disable, when the secondary APIC timer is initialized. If the boot CPU APIC timer was registered as a functional clock event device, then fix this up and utilize the CLOCK_EVT_NOTIFY_BROADCAST_FORCE mechanism to force the already registered boot CPU APIC timer into broadcast mode. Tested by force injecting the failure mode. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2007-10-12x86_64: cleanup apic.c after clock events switchChris Wright1-8/+14
Make variables static. Signed-off-by: Chris Wright <chrisw@sous-sol.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2007-10-12x86_64: remove now unused codeThomas Gleixner1-105/+1
Remove the unused code after the switch to clock events. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Chris Wright <chrisw@sous-sol.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
2007-10-12x86: disable apic timer for AMD C1E enabled CPUsThomas Gleixner1-1/+1
AMDs C1E enabled CPUs stop the local apic timer, when both cores are idle. This is a hardware feature which breaks highres/dynticks. Add the same quirk as we have for 32 bit already. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
2007-10-12x86_64: convert to clock eventsThomas Gleixner1-40/+50
Finally switch to the clockevents code. Share code with i386 for hpet and PIT. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Chris Wright <chrisw@sous-sol.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
2007-10-12x86_64: Add (not yet used) clock event functionsThomas Gleixner1-0/+79
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Chris Wright <chrisw@sous-sol.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
2007-10-12x86_64: remove nested irq disablesThomas Gleixner1-6/+6
setup_APIC_timer disables interrupts anyway. So no need to do the same in setup_boot_APIC_clock and setup_secondary_APIC_clock. Disable interrupts explicit in the calibration code. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Chris Wright <chrisw@sous-sol.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
2007-10-12x86_64: apic change setup_APIC_timer calling conventionThomas Gleixner1-4/+4
setup_APIC_timer takes the file global calibration result as an argument. Remove it. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Chris Wright <chrisw@sous-sol.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
2007-10-12x86_64: Remove APIC_DIVISORThomas Gleixner1-5/+3
APIC_DIVISOR is rather useless. It makes the calibration result more accurate in the first place, but we discard this later when we write the value to the APIC timer by dividing the calibration value by APIC_DIVISOR. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Chris Wright <chrisw@sous-sol.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
2007-10-12x86_64: Move apic calibration code aroundThomas Gleixner1-9/+6
Let the calibration code fill in calibration_result directly and move the variable on top of the file. Fixup a printk w/o log level while at it. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Chris Wright <chrisw@sous-sol.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
2007-10-12x86_64: remove pit synchronizationThomas Gleixner1-18/+0
The APIC timer setup code synchronizes the local APIC timer to the PIT/HPET. This is pointless as the PIT and the local APIC timer frequency are not correlated and the APIC timer calibration can never be accurate enough to avoid that the local APIC timer and the PIT/HPET drift apart. Simply remove it. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Chris Wright <chrisw@sous-sol.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
2007-10-12x86_64: prepare apic code for clock eventsThomas Gleixner1-8/+15
Change __setup_APIC_LVTT so it takes the arguments which are necessary for the later clock events switch. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Chris Wright <chrisw@sous-sol.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
2007-10-12x86: remove never used apic_mappedYinghai Lu1-3/+2
[ tglx: arch/x86 adaptation ] Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Andi Kleen <ak@suse.de> Cc: Christoph Lameter <clameter@sgi.com> Cc: Len Brown <lenb@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2007-10-11x86_64: move kernelThomas Gleixner1-0/+1253
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
generated by cgit v1.2.3 (git 2.39.1) at 2025-03-11 22:25:35 +0000