| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Add a globally unique sequence number which is incremented when ioperm() is
changing the I/O bitmap of a task. Store the new sequence number in the
io_bitmap structure and compare it with the sequence number of the I/O
bitmap which was last loaded on a CPU. Only update the bitmap if the
sequence is different.
That should further reduce the overhead of I/O bitmap scheduling when there
are only a few I/O bitmap users on the system.
The 64bit sequence counter is sufficient. A wraparound of the sequence
counter assuming an ioperm() call every nanosecond would require about 584
years of uptime.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
No point in having all the data in thread_struct, especially as upcoming
changes add more.
Make the bitmap in the new struct accessible as array of longs and as array
of characters via a union, so both the bitmap functions and the update
logic can avoid type casts.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
Move the non hardware portion of I/O bitmap data into a seperate struct for
readability sake.
Originally-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
There is no requirement to update the TSS I/O bitmap when a thread using it is
scheduled out and the incoming thread does not use it.
For the permission check based on the TSS I/O bitmap the CPU calculates the memory
location of the I/O bitmap by the address of the TSS and the io_bitmap_base member
of the tss_struct. The easiest way to invalidate the I/O bitmap is to switch the
offset to an address outside of the TSS limit.
If an I/O instruction is issued from user space the TSS limit causes #GP to be
raised in the same was as valid I/O bitmap with all bits set to 1 would do.
This removes the extra work when an I/O bitmap using task is scheduled out
and puts the burden on the rare I/O bitmap users when they are scheduled
in.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
While looking at the TSS io bitmap it turned out that any change in that
area would require identical changes to copy_thread_tls(). The 32 and 64
bit variants share sufficient code to consolidate them into a common
function to avoid duplication of upcoming modifications.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Andy Lutomirski <luto@kernel.org>
|
|
In preparation for static_call and variable size jump_label support,
teach text_poke_bp() to emulate instructions, namely:
JMP32, JMP8, CALL, NOP2, NOP_ATOMIC5, INT3
The current text_poke_bp() takes a @handler argument which is used as
a jump target when the temporary INT3 is hit by a different CPU.
When patching CALL instructions, this doesn't work because we'd miss
the PUSH of the return address. Instead, teach poke_int3_handler() to
emulate an instruction, typically the instruction we're patching in.
This fits almost all text_poke_bp() users, except
arch_unoptimize_kprobe() which restores random text, and for that site
we have to build an explicit emulate instruction.
Tested-by: Alexei Starovoitov <ast@kernel.org>
Tested-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Reviewed-by: Daniel Bristot de Oliveira <bristot@redhat.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20191111132457.529086974@infradead.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
(cherry picked from commit 8c7eebc10687af45ac8e40ad1bac0cf7893dba9f)
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
The x86_capability array in cpuinfo_x86 is of type u32 and thus is
naturally aligned to 4 bytes. But, set_bit() and clear_bit() require the
array to be aligned to size of unsigned long (i.e. 8 bytes on 64-bit
systems).
The array pointer is handed into atomic bit operations. If the access is
not aligned to unsigned long then the atomic bit operations can end up
crossing a cache line boundary, which causes the CPU to do a full bus lock
as it can't lock both cache lines at once. The bus lock operation is heavy
weight and can cause severe performance degradation.
The upcoming #AC split lock detection mechanism will issue warnings for
this kind of access.
Force the alignment of the array to unsigned long. This avoids the massive
code changes which would be required when converting the array data type to
unsigned long.
[ tglx: Rewrote changelog so it contains information WHY this is required ]
Suggested-by: David Laight <David.Laight@aculab.com>
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20190916223958.27048-4-tony.luck@intel.com
|
|
In IOAPIC fixed delivery mode instead of flushing the scan
requests to all vCPUs, we should only send the requests to
vCPUs specified within the destination field.
This patch introduces kvm_get_dest_vcpus_mask() API which
retrieves an array of target vCPUs by using
kvm_apic_map_get_dest_lapic() and then based on the
vcpus_idx, it sets the bit in a bitmap. However, if the above
fails kvm_get_dest_vcpus_mask() finds the target vCPUs by
traversing all available vCPUs. Followed by setting the
bits in the bitmap.
If we had different vCPUs in the previous request for the
same redirection table entry then bits corresponding to
these vCPUs are also set. This to done to keep
ioapic_handled_vectors synchronized.
This bitmap is then eventually passed on to
kvm_make_vcpus_request_mask() to generate a masked request
only for the target vCPUs.
This would enable us to reduce the latency overhead on isolated
vCPUs caused by the IPI to process due to KVM_REQ_IOAPIC_SCAN.
Suggested-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Nitesh Narayan Lal <nitesh@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Currently, a host perf_event is created for a vPMC functionality emulation.
It’s unpredictable to determine if a disabled perf_event will be reused.
If they are disabled and are not reused for a considerable period of time,
those obsolete perf_events would increase host context switch overhead that
could have been avoided.
If the guest doesn't WRMSR any of the vPMC's MSRs during an entire vcpu
sched time slice, and its independent enable bit of the vPMC isn't set,
we can predict that the guest has finished the use of this vPMC, and then
do request KVM_REQ_PMU in kvm_arch_sched_in and release those perf_events
in the first call of kvm_pmu_handle_event() after the vcpu is scheduled in.
This lazy mechanism delays the event release time to the beginning of the
next scheduled time slice if vPMC's MSRs aren't changed during this time
slice. If guest comes back to use this vPMC in next time slice, a new perf
event would be re-created via perf_event_create_kernel_counter() as usual.
Suggested-by: Wei Wang <wei.w.wang@intel.com>
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Like Xu <like.xu@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The perf_event_create_kernel_counter() in the pmc_reprogram_counter() is
a heavyweight and high-frequency operation, especially when host disables
the watchdog (maximum 21000000 ns) which leads to an unacceptable latency
of the guest NMI handler. It limits the use of vPMUs in the guest.
When a vPMC is fully enabled, the legacy reprogram_*_counter() would stop
and release its existing perf_event (if any) every time EVEN in most cases
almost the same requested perf_event will be created and configured again.
For each vPMC, if the reuqested config ('u64 eventsel' for gp and 'u8 ctrl'
for fixed) is the same as its current config AND a new sample period based
on pmc->counter is accepted by host perf interface, the current event could
be reused safely as a new created one does. Otherwise, do release the
undesirable perf_event and reprogram a new one as usual.
It's light-weight to call pmc_pause_counter (disable, read and reset event)
and pmc_resume_counter (recalibrate period and re-enable event) as guest
expects instead of release-and-create again on any condition. Compared to
use the filterable event->attr or hw.config, a new 'u64 current_config'
field is added to save the last original programed config for each vPMC.
Based on this implementation, the number of calls to pmc_reprogram_counter
is reduced by ~82.5% for a gp sampling event and ~99.9% for a fixed event.
In the usage of multiplexing perf sampling mode, the average latency of the
guest NMI handler is reduced from 104923 ns to 48393 ns (~2.16x speed up).
If host disables watchdog, the minimum latecy of guest NMI handler could be
speed up at ~3413x (from 20407603 to 5979 ns) and at ~786x in the average.
Suggested-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Like Xu <like.xu@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
pci.h is not a UAPI header, so the __KERNEL__ ifdef is rather pointless.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20191113071836.21041-4-hch@lst.de
|
|
This file only contains external declarations for two non-existing
function pointers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20191113071836.21041-3-hch@lst.de
|
|
The calgary IOMMU was only used on high-end IBM systems in the early
x86_64 age and has no known users left. Remove it to avoid having to
touch it for pending changes to the DMA API.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20191113071836.21041-2-hch@lst.de
|
|
Pick up upstream fixes to avoid conflicts.
|
|
When the crashkernel kernel command line option is specified, the low
1M memory will always be reserved now. Therefore, it's not necessary to
create a backup region anymore and also no need to copy the contents of
the first 640k to it.
Remove all the code related to handling that backup region.
[ bp: Massage commit message. ]
Signed-off-by: Lianbo Jiang <lijiang@redhat.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: bhe@redhat.com
Cc: Dave Young <dyoung@redhat.com>
Cc: d.hatayama@fujitsu.com
Cc: dhowells@redhat.com
Cc: ebiederm@xmission.com
Cc: horms@verge.net.au
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jürgen Gross <jgross@suse.com>
Cc: kexec@lists.infradead.org
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: vgoyal@redhat.com
Cc: x86-ml <x86@kernel.org>
Link: https://lkml.kernel.org/r/20191108090027.11082-3-lijiang@redhat.com
|
|
On x86, purgatory() copies the first 640K of memory to a backup region
because the kernel needs those first 640K for the real mode trampoline
during boot, among others.
However, when SME is enabled, the kernel cannot properly copy the old
memory to the backup area but reads only its encrypted contents. The
result is that the crash tool gets invalid pointers when parsing vmcore:
crash> kmem -s|grep -i invalid
kmem: dma-kmalloc-512: slab:ffffd77680001c00 invalid freepointer:a6086ac099f0c5a4
kmem: dma-kmalloc-512: slab:ffffd77680001c00 invalid freepointer:a6086ac099f0c5a4
crash>
So reserve the remaining low 1M memory when the crashkernel option is
specified (after reserving real mode memory) so that allocated memory
does not fall into the low 1M area and thus the copying of the contents
of the first 640k to a backup region in purgatory() can be avoided
altogether.
This way, it does not need to be included in crash dumps or used for
anything except the trampolines that must live in the low 1M.
[ bp: Heavily rewrite commit message, flip check logic in
crash_reserve_low_1M().]
Signed-off-by: Lianbo Jiang <lijiang@redhat.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: bhe@redhat.com
Cc: Dave Young <dyoung@redhat.com>
Cc: d.hatayama@fujitsu.com
Cc: dhowells@redhat.com
Cc: ebiederm@xmission.com
Cc: horms@verge.net.au
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jürgen Gross <jgross@suse.com>
Cc: kexec@lists.infradead.org
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: vgoyal@redhat.com
Cc: x86-ml <x86@kernel.org>
Link: https://lkml.kernel.org/r/20191108090027.11082-2-lijiang@redhat.com
Link: https://bugzilla.kernel.org/show_bug.cgi?id=204793
|
|
Add a forward declaration of struct kimage to the crash.h header because
future changes will invoke a crash-specific function from the realmode
init path and the compiler will complain otherwise like this:
In file included from arch/x86/realmode/init.c:11:
./arch/x86/include/asm/crash.h:5:32: warning: ‘struct kimage’ declared inside\
parameter list will not be visible outside of this definition or declaration
5 | int crash_load_segments(struct kimage *image);
| ^~~~~~
./arch/x86/include/asm/crash.h:6:37: warning: ‘struct kimage’ declared inside\
parameter list will not be visible outside of this definition or declaration
6 | int crash_copy_backup_region(struct kimage *image);
| ^~~~~~
./arch/x86/include/asm/crash.h:7:39: warning: ‘struct kimage’ declared inside\
parameter list will not be visible outside of this definition or declaration
7 | int crash_setup_memmap_entries(struct kimage *image,
|
[ bp: Rewrite the commit message. ]
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Lianbo Jiang <lijiang@redhat.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: bhe@redhat.com
Cc: d.hatayama@fujitsu.com
Cc: dhowells@redhat.com
Cc: dyoung@redhat.com
Cc: ebiederm@xmission.com
Cc: horms@verge.net.au
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jürgen Gross <jgross@suse.com>
Cc: kexec@lists.infradead.org
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: vgoyal@redhat.com
Cc: x86-ml <x86@kernel.org>
Link: https://lkml.kernel.org/r/20191108090027.11082-4-lijiang@redhat.com
Link: https://lkml.kernel.org/r/201910310233.EJRtTMWP%25lkp@intel.com
|
|
This is to augment commit 3f5a7896a5 ("x86/mce: Include the PPIN in MCE
records when available").
I'm also adding "synd" and "ipid" fields to struct xen_mce, in an
attempt to keep field offsets in sync with struct mce. These two fields
won't get populated for now, though.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
Objtool complains about the new ftrace direct trampoline code:
arch/x86/kernel/ftrace_64.o: warning: objtool: ftrace_regs_caller()+0x190: stack state mismatch: cfa1=7+16 cfa2=7+24
Typically, code has a deterministic stack layout, such that at a given
instruction address, the stack frame size is always the same.
That's not the case for the new ftrace_regs_caller() code after it
adjusts the stack for the direct case. Just plead ignorance and assume
it's always the non-direct path. Note this creates a tiny window for
ORC to get confused.
Link: http://lkml.kernel.org/r/20191108225100.ea3bhsbdf6oerj6g@treble
Reported-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
Enable x86 to allow for register_ftrace_direct(), where a custom trampoline
may be called directly from an ftrace mcount/fentry location.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
'arm/mediatek', 'arm/tegra', 'arm/smmu', 'x86/amd', 'x86/vt-d', 'virtio' and 'core' into next
|
|
If the hardware supports TSC scaling, Hyper-V will set bit 15 of the
HV_PARTITION_PRIVILEGE_MASK in guest VMs with a compatible Hyper-V
configuration version. Bit 15 corresponds to the
AccessTscInvariantControls privilege. If this privilege bit is set,
guests can access the HvSyntheticInvariantTscControl MSR: guests can
set bit 0 of this synthetic MSR to enable the InvariantTSC feature.
After setting the synthetic MSR, CPUID will enumerate support for
InvariantTSC.
Signed-off-by: Andrea Parri <parri.andrea@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lkml.kernel.org/r/20191003155200.22022-1-parri.andrea@gmail.com
|
|
When sending an IPI to a single CPU there is no need to deal with cpumasks.
With 2 CPU guest on WS2019 a minor (like 3%, 8043 -> 7761 CPU cycles)
improvement with smp_call_function_single() loop benchmark can be seeb. The
optimization, however, is tiny and straitforward. Also, send_ipi_one() is
important for PV spinlock kick.
Switching to the regular APIC IPI send for CPU > 64 case does not make
sense as it is twice as expesive (12650 CPU cycles for __send_ipi_mask_ex()
call, 26000 for orig_apic.send_IPI(cpu, vector)).
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Reviewed-by: Roman Kagan <rkagan@virtuozzo.com>
Link: https://lkml.kernel.org/r/20191027151938.7296-1-vkuznets@redhat.com
|
|
Various architectures that use asm-generic/io.h still defined their
own default versions of ioremap_nocache, ioremap_wt and ioremap_wc
that point back to plain ioremap directly or indirectly. Remove these
definitions and rely on asm-generic/io.h instead. For this to work
the backup ioremap_* defintions needs to be changed to purely cpp
macros instea of inlines to cover for architectures like openrisc
that only define ioremap after including <asm-generic/io.h>.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Palmer Dabbelt <palmer@dabbelt.com>
|
|
Use ioremap() as the main implemented function, and defines
ioremap_nocache() as a deprecated alias of ioremap() in
preparation of removing ioremap_nocache() entirely.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
|
|
VT-d RMRR (Reserved Memory Region Reporting) regions are reserved
for device use only and should not be part of allocable memory pool of OS.
BIOS e820_table reports complete memory map to OS, including OS usable
memory ranges and BIOS reserved memory ranges etc.
x86 BIOS may not be trusted to include RMRR regions as reserved type
of memory in its e820 memory map, hence validate every RMRR entry
with the e820 memory map to make sure the RMRR regions will not be
used by OS for any other purposes.
ia64 EFI is working fine so implement RMRR validation as a dummy function
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Sohil Mehta <sohil.mehta@intel.com>
Signed-off-by: Yian Chen <yian.chen@intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
The devices found behind this PCIe chip have unusual DMA mapping
constraints as there is an AMBA interconnect placed in between them and
the different PCI endpoints. The offset between physical memory
addresses and AMBA's view is provided by reading a PCI config register,
which is saved and used whenever DMA mapping is needed.
It turns out that this DMA setup can be represented by properly setting
'dma_pfn_offset', 'dma_bus_mask' and 'dma_mask' during the PCI device
enable fixup. And ultimately allows us to get rid of this device's
custom DMA functions.
Aside from the code deletion and DMA setup, sta2x11_pdev_to_mapping() is
moved to avoid warnings whenever CONFIG_PM is not enabled.
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Given that EFI_MEMORY_SP is platform BIOS policy decision for marking
memory ranges as "reserved for a specific purpose" there will inevitably
be scenarios where the BIOS omits the attribute in situations where it
is desired. Unlike other attributes if the OS wants to reserve this
memory from the kernel the reservation needs to happen early in init. So
early, in fact, that it needs to happen before e820__memblock_setup()
which is a pre-requisite for efi_fake_memmap() that wants to allocate
memory for the updated table.
Introduce an x86 specific efi_fake_memmap_early() that can search for
attempts to set EFI_MEMORY_SP via efi_fake_mem and update the e820 table
accordingly.
The KASLR code that scans the command line looking for user-directed
memory reservations also needs to be updated to consider
"efi_fake_mem=nn@ss:0x40000" requests.
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
UEFI 2.8 defines an EFI_MEMORY_SP attribute bit to augment the
interpretation of the EFI Memory Types as "reserved for a specific
purpose".
The proposed Linux behavior for specific purpose memory is that it is
reserved for direct-access (device-dax) by default and not available for
any kernel usage, not even as an OOM fallback. Later, through udev
scripts or another init mechanism, these device-dax claimed ranges can
be reconfigured and hot-added to the available System-RAM with a unique
node identifier. This device-dax management scheme implements "soft" in
the "soft reserved" designation by allowing some or all of the
reservation to be recovered as typical memory. This policy can be
disabled at compile-time with CONFIG_EFI_SOFT_RESERVE=n, or runtime with
efi=nosoftreserve.
This patch introduces 2 new concepts at once given the entanglement
between early boot enumeration relative to memory that can optionally be
reserved from the kernel page allocator by default. The new concepts
are:
- E820_TYPE_SOFT_RESERVED: Upon detecting the EFI_MEMORY_SP
attribute on EFI_CONVENTIONAL memory, update the E820 map with this
new type. Only perform this classification if the
CONFIG_EFI_SOFT_RESERVE=y policy is enabled, otherwise treat it as
typical ram.
- IORES_DESC_SOFT_RESERVED: Add a new I/O resource descriptor for
a device driver to search iomem resources for application specific
memory. Teach the iomem code to identify such ranges as "Soft Reserved".
Note that the comment for do_add_efi_memmap() needed refreshing since it
seemed to imply that the efi map might overflow the e820 table, but that
is not an issue as of commit 7b6e4ba3cb1f "x86/boot/e820: Clean up the
E820_X_MAX definition" that removed the 128 entry limit for
e820__range_add().
A follow-on change integrates parsing of the ACPI HMAT to identify the
node and sub-range boundaries of EFI_MEMORY_SP designated memory. For
now, just identify and reserve memory of this type.
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reported-by: kbuild test robot <lkp@intel.com>
Reviewed-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
In preparation for adding another EFI_MEMMAP dependent call that needs
to occur before e820__memblock_setup() fixup the existing efi calls to
check for EFI_MEMMAP internally. This ends up being cleaner than the
alternative of checking EFI_MEMMAP multiple times in setup_arch().
Reviewed-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
AMD 2nd generation EPYC processors support the UMIP (User-Mode
Instruction Prevention) feature. So, rename X86_INTEL_UMIP to
generic X86_UMIP and modify the text to cover both Intel and AMD.
[ bp: take of the disabled-features.h copy in tools/ too. ]
Signed-off-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Ricardo Neri <ricardo.neri-calderon@linux.intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "x86@kernel.org" <x86@kernel.org>
Link: https://lkml.kernel.org/r/157298912544.17462.2018334793891409521.stgit@naples-babu.amd.com
|
|
Currently bitops-instrumented.h assumes that the architecture provides
atomic, non-atomic and locking bitops (e.g. both set_bit and __set_bit).
This is true on x86 and s390, but is not always true: there is a
generic bitops/non-atomic.h header that provides generic non-atomic
operations, and also a generic bitops/lock.h for locking operations.
powerpc uses the generic non-atomic version, so it does not have it's
own e.g. __set_bit that could be renamed arch___set_bit.
Split up bitops-instrumented.h to mirror the atomic/non-atomic/lock
split. This allows arches to only include the headers where they
have arch-specific versions to rename. Update x86 and s390.
(The generic operations are automatically instrumented because they're
written in C, not asm.)
Suggested-by: Christophe Leroy <christophe.leroy@c-s.fr>
Reviewed-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Daniel Axtens <dja@axtens.net>
Acked-by: Marco Elver <elver@google.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190820024941.12640-1-dja@axtens.net
|
|
The page table pages corresponding to broken down large pages are zapped in
FIFO order, so that the large page can potentially be recovered, if it is
not longer being used for execution. This removes the performance penalty
for walking deeper EPT page tables.
By default, one large page will last about one hour once the guest
reaches a steady state.
Signed-off-by: Junaid Shahid <junaids@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
The memory freeing report wasn't very useful for figuring out which
parts of the kernel image were being freed. Add the details for clearer
reporting in dmesg.
Before:
Freeing unused kernel image memory: 1348K
Write protecting the kernel read-only data: 20480k
Freeing unused kernel image memory: 2040K
Freeing unused kernel image memory: 172K
After:
Freeing unused kernel image (initmem) memory: 1348K
Write protecting the kernel read-only data: 20480k
Freeing unused kernel image (text/rodata gap) memory: 2040K
Freeing unused kernel image (rodata/data gap) memory: 172K
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: linux-alpha@vger.kernel.org
Cc: linux-arch@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-c6x-dev@linux-c6x.org
Cc: linux-ia64@vger.kernel.org
Cc: linuxppc-dev@lists.ozlabs.org
Cc: linux-s390@vger.kernel.org
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rick Edgecombe <rick.p.edgecombe@intel.com>
Cc: Segher Boessenkool <segher@kernel.crashing.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Cc: x86-ml <x86@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: https://lkml.kernel.org/r/20191029211351.13243-28-keescook@chromium.org
|
|
Various calculations are using the end of the exception table (which
does not need to be executable) as the end of the text segment. Instead,
in preparation for moving the exception table into RO_DATA, move _etext
after the exception table and update the calculations.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: linux-alpha@vger.kernel.org
Cc: linux-arch@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-c6x-dev@linux-c6x.org
Cc: linux-ia64@vger.kernel.org
Cc: linuxppc-dev@lists.ozlabs.org
Cc: linux-s390@vger.kernel.org
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rick Edgecombe <rick.p.edgecombe@intel.com>
Cc: Ross Zwisler <zwisler@chromium.org>
Cc: Segher Boessenkool <segher@kernel.crashing.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Thomas Lendacky <Thomas.Lendacky@amd.com>
Cc: Will Deacon <will@kernel.org>
Cc: x86-ml <x86@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: https://lkml.kernel.org/r/20191029211351.13243-16-keescook@chromium.org
|
|
With some Intel processors, putting the same virtual address in the TLB
as both a 4 KiB and 2 MiB page can confuse the instruction fetch unit
and cause the processor to issue a machine check resulting in a CPU lockup.
Unfortunately when EPT page tables use huge pages, it is possible for a
malicious guest to cause this situation.
Add a knob to mark huge pages as non-executable. When the nx_huge_pages
parameter is enabled (and we are using EPT), all huge pages are marked as
NX. If the guest attempts to execute in one of those pages, the page is
broken down into 4K pages, which are then marked executable.
This is not an issue for shadow paging (except nested EPT), because then
the host is in control of TLB flushes and the problematic situation cannot
happen. With nested EPT, again the nested guest can cause problems shadow
and direct EPT is treated in the same way.
[ tglx: Fixup default to auto and massage wording a bit ]
Originally-by: Junaid Shahid <junaids@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
Some processors may incur a machine check error possibly resulting in an
unrecoverable CPU lockup when an instruction fetch encounters a TLB
multi-hit in the instruction TLB. This can occur when the page size is
changed along with either the physical address or cache type. The relevant
erratum can be found here:
https://bugzilla.kernel.org/show_bug.cgi?id=205195
There are other processors affected for which the erratum does not fully
disclose the impact.
This issue affects both bare-metal x86 page tables and EPT.
It can be mitigated by either eliminating the use of large pages or by
using careful TLB invalidations when changing the page size in the page
tables.
Just like Spectre, Meltdown, L1TF and MDS, a new bit has been allocated in
MSR_IA32_ARCH_CAPABILITIES (PSCHANGE_MC_NO) and will be set on CPUs which
are mitigated against this issue.
Signed-off-by: Vineela Tummalapalli <vineela.tummalapalli@intel.com>
Co-developed-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
TSX Async Abort (TAA) is a side channel vulnerability to the internal
buffers in some Intel processors similar to Microachitectural Data
Sampling (MDS). In this case, certain loads may speculatively pass
invalid data to dependent operations when an asynchronous abort
condition is pending in a TSX transaction.
This includes loads with no fault or assist condition. Such loads may
speculatively expose stale data from the uarch data structures as in
MDS. Scope of exposure is within the same-thread and cross-thread. This
issue affects all current processors that support TSX, but do not have
ARCH_CAP_TAA_NO (bit 8) set in MSR_IA32_ARCH_CAPABILITIES.
On CPUs which have their IA32_ARCH_CAPABILITIES MSR bit MDS_NO=0,
CPUID.MD_CLEAR=1 and the MDS mitigation is clearing the CPU buffers
using VERW or L1D_FLUSH, there is no additional mitigation needed for
TAA. On affected CPUs with MDS_NO=1 this issue can be mitigated by
disabling the Transactional Synchronization Extensions (TSX) feature.
A new MSR IA32_TSX_CTRL in future and current processors after a
microcode update can be used to control the TSX feature. There are two
bits in that MSR:
* TSX_CTRL_RTM_DISABLE disables the TSX sub-feature Restricted
Transactional Memory (RTM).
* TSX_CTRL_CPUID_CLEAR clears the RTM enumeration in CPUID. The other
TSX sub-feature, Hardware Lock Elision (HLE), is unconditionally
disabled with updated microcode but still enumerated as present by
CPUID(EAX=7).EBX{bit4}.
The second mitigation approach is similar to MDS which is clearing the
affected CPU buffers on return to user space and when entering a guest.
Relevant microcode update is required for the mitigation to work. More
details on this approach can be found here:
https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html
The TSX feature can be controlled by the "tsx" command line parameter.
If it is force-enabled then "Clear CPU buffers" (MDS mitigation) is
deployed. The effective mitigation state can be read from sysfs.
[ bp:
- massage + comments cleanup
- s/TAA_MITIGATION_TSX_DISABLE/TAA_MITIGATION_TSX_DISABLED/g - Josh.
- remove partial TAA mitigation in update_mds_branch_idle() - Josh.
- s/tsx_async_abort_cmdline/tsx_async_abort_parse_cmdline/g
]
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com>
|
|
Transactional Synchronization Extensions (TSX) may be used on certain
processors as part of a speculative side channel attack. A microcode
update for existing processors that are vulnerable to this attack will
add a new MSR - IA32_TSX_CTRL to allow the system administrator the
option to disable TSX as one of the possible mitigations.
The CPUs which get this new MSR after a microcode upgrade are the ones
which do not set MSR_IA32_ARCH_CAPABILITIES.MDS_NO (bit 5) because those
CPUs have CPUID.MD_CLEAR, i.e., the VERW implementation which clears all
CPU buffers takes care of the TAA case as well.
[ Note that future processors that are not vulnerable will also
support the IA32_TSX_CTRL MSR. ]
Add defines for the new IA32_TSX_CTRL MSR and its bits.
TSX has two sub-features:
1. Restricted Transactional Memory (RTM) is an explicitly-used feature
where new instructions begin and end TSX transactions.
2. Hardware Lock Elision (HLE) is implicitly used when certain kinds of
"old" style locks are used by software.
Bit 7 of the IA32_ARCH_CAPABILITIES indicates the presence of the
IA32_TSX_CTRL MSR.
There are two control bits in IA32_TSX_CTRL MSR:
Bit 0: When set, it disables the Restricted Transactional Memory (RTM)
sub-feature of TSX (will force all transactions to abort on the
XBEGIN instruction).
Bit 1: When set, it disables the enumeration of the RTM and HLE feature
(i.e. it will make CPUID(EAX=7).EBX{bit4} and
CPUID(EAX=7).EBX{bit11} read as 0).
The other TSX sub-feature, Hardware Lock Elision (HLE), is
unconditionally disabled by the new microcode but still enumerated
as present by CPUID(EAX=7).EBX{bit4}, unless disabled by
IA32_TSX_CTRL_MSR[1] - TSX_CTRL_CPUID_CLEAR.
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Neelima Krishnan <neelima.krishnan@intel.com>
Reviewed-by: Mark Gross <mgross@linux.intel.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Thomas Gleixner:
"Two fixes for the VMWare guest support:
- Unbreak VMWare platform detection which got wreckaged by converting
an integer constant to a string constant.
- Fix the clang build of the VMWAre hypercall by explicitely
specifying the ouput register for INL instead of using the short
form"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/cpu/vmware: Fix platform detection VMWARE_PORT macro
x86/cpu/vmware: Use the full form of INL in VMWARE_HYPERCALL, for clang/llvm
|
|
If the "virtualize APIC accesses" VM-execution control is set in the
VMCS, the APIC virtualization hardware is triggered when a page walk
in VMX non-root mode terminates at a PTE wherein the address of the 4k
page frame matches the APIC-access address specified in the VMCS. On
hardware, the APIC-access address may be any valid 4k-aligned physical
address.
KVM's nVMX implementation enforces the additional constraint that the
APIC-access address specified in the vmcs12 must be backed by
a "struct page" in L1. If not, L0 will simply clear the "virtualize
APIC accesses" VM-execution control in the vmcs02.
The problem with this approach is that the L1 guest has arranged the
vmcs12 EPT tables--or shadow page tables, if the "enable EPT"
VM-execution control is clear in the vmcs12--so that the L2 guest
physical address(es)--or L2 guest linear address(es)--that reference
the L2 APIC map to the APIC-access address specified in the
vmcs12. Without the "virtualize APIC accesses" VM-execution control in
the vmcs02, the APIC accesses in the L2 guest will directly access the
APIC-access page in L1.
When there is no mapping whatsoever for the APIC-access address in L1,
the L2 VM just loses the intended APIC virtualization. However, when
the APIC-access address is mapped to an MMIO region in L1, the L2
guest gets direct access to the L1 MMIO device. For example, if the
APIC-access address specified in the vmcs12 is 0xfee00000, then L2
gets direct access to L1's APIC.
Since this vmcs12 configuration is something that KVM cannot
faithfully emulate, the appropriate response is to exit to userspace
with KVM_INTERNAL_ERROR_EMULATION.
Fixes: fe3ef05c7572 ("KVM: nVMX: Prepare vmcs02 from vmcs01 and vmcs12")
Reported-by: Dan Cross <dcross@google.com>
Signed-off-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Peter Shier <pshier@google.com>
Reviewed-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Cache whether XSAVES is enabled in the guest by adding xsaves_enabled to
vcpu->arch.
Reviewed-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Aaron Lewis <aaronlewis@google.com>
Change-Id: If4638e0901c28a4494dad2e103e2c075e8ab5d68
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The crash_copy_backup_region() function is unused so remove it.
Signed-off-by: Lianbo Jiang <lijiang@redhat.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: bhe@redhat.com
Cc: dhowells@redhat.com
Cc: dyoung@redhat.com
Cc: ebiederm@xmission.com
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jürgen Gross <jgross@suse.com>
Cc: kexec@lists.infradead.org
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: vgoyal@redhat.com
Cc: x86-ml <x86@kernel.org>
Cc: Yi Wang <wang.yi59@zte.com.cn>
Link: https://lkml.kernel.org/r/20191017094347.20327-3-lijiang@redhat.com
|
|
Replace the explicit declaration of "u64 reprogram_pmi" with the generic
macro DECLARE_BITMAP for all possible appropriate number of bits.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Like Xu <like.xu@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Generally, APICv for all vcpus in the VM are enable/disable in the same
manner. So, get_enable_apicv() should represent APICv status of the VM
instead of each VCPU.
Modify kvm_x86_ops.get_enable_apicv() to take struct kvm as parameter
instead of struct kvm_vcpu.
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Handle caching CR3 (from VMX's VMCS) into struct kvm_vcpu via the common
cache_reg() callback and drop the dedicated decache_cr3(). The name
decache_cr3() is somewhat confusing as the caching behavior of CR3
follows that of GPRs, RFLAGS and PDPTRs, (handled via cache_reg()), and
has nothing in common with the caching behavior of CR0/CR4 (whose
decache_cr{0,4}_guest_bits() likely provided the 'decache' verbiage).
This would effectivel adds a BUG() if KVM attempts to cache CR3 on SVM.
Change it to a WARN_ON_ONCE() -- if the cache never requires filling,
the value is already in the right place -- and opportunistically add one
in VMX to provide an equivalent check.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Now that indexing into arch.regs is either protected by WARN_ON_ONCE or
done with hardcoded enums, combine all definitions for registers that
are tracked by regs_avail and regs_dirty into 'enum kvm_reg'. Having a
single enum type will simplify additional cleanup related to regs_avail
and regs_dirty.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The platform detection VMWARE_PORT macro uses the VMWARE_HYPERVISOR_PORT
definition, but expects it to be an integer. However, when it was moved
to the new vmware.h include file, it was changed to be a string to better
fit into the VMWARE_HYPERCALL set of macros. This obviously breaks the
platform detection VMWARE_PORT functionality.
Change the VMWARE_HYPERVISOR_PORT and VMWARE_HYPERVISOR_PORT_HB
definitions to be integers, and use __stringify() for their stringified
form when needed.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sean Christopherson <sean.j.christopherson@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: b4dd4f6e3648 ("Add a header file for hypercall definitions")
Link: https://lkml.kernel.org/r/20191021172403.3085-3-thomas_os@shipmail.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
LLVM's assembler doesn't accept the short form INL instruction:
inl (%%dx)
but instead insists on the output register to be explicitly specified.
This was previously fixed for the VMWARE_PORT macro. Fix it also for
the VMWARE_HYPERCALL macro.
Suggested-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sean Christopherson <sean.j.christopherson@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: clang-built-linux@googlegroups.com
Fixes: b4dd4f6e3648 ("Add a header file for hypercall definitions")
Link: https://lkml.kernel.org/r/20191021172403.3085-2-thomas_os@shipmail.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
arch_faults_on_old_pte is a helper to indicate that it might cause page
fault when accessing old pte. But on x86, there is feature to setting
pte access flag by hardware. Hence implement an overriding stub which
always returns false.
Signed-off-by: Jia He <justin.he@arm.com>
Suggested-by: Will Deacon <will@kernel.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
