summaryrefslogtreecommitdiffstats
path: root/arch/x86/include/asm/device.h
AgeCommit message (Collapse)AuthorFilesLines
2020-06-30x86: Remove dev->archdata.iommu pointerJoerg Roedel1-3/+0
There are no users left, all drivers have been converted to use the per-device private pointer offered by IOMMU core. Signed-off-by: Joerg Roedel <jroedel@suse.de> Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com> Acked-by: Borislav Petkov <bp@suse.de> Link: https://lore.kernel.org/r/20200625130836.1916-10-joro@8bytes.org
2020-05-27x86: Hide the archdata.iommu field behind generic IOMMU_APIKrzysztof Kozlowski1-1/+1
There is a generic, kernel wide configuration symbol for enabling the IOMMU specific bits: CONFIG_IOMMU_API. Implementations (including INTEL_IOMMU and AMD_IOMMU driver) select it so use it here as well. This makes the conditional archdata.iommu field consistent with other platforms and also fixes any compile test builds of other IOMMU drivers, when INTEL_IOMMU or AMD_IOMMU are not selected). For the case when INTEL_IOMMU/AMD_IOMMU and COMPILE_TEST are not selected, this should create functionally equivalent code/choice. With COMPILE_TEST this field could appear if other IOMMU drivers are chosen but neither INTEL_IOMMU nor AMD_IOMMU are not. Reported-by: kbuild test robot <lkp@intel.com> Fixes: e93a1695d7fb ("iommu: Enable compile testing for some of drivers") Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Borislav Petkov <bp@suse.de> Link: https://lore.kernel.org/r/20200518120855.27822-2-krzk@kernel.org Signed-off-by: Joerg Roedel <jroedel@suse.de>
2020-01-24x86/PCI: Remove X86_DEV_DMA_OPSChristoph Hellwig1-10/+0
There are no users of X86_DEV_DMA_OPS left, so remove the code. Link: https://lore.kernel.org/r/1579613871-301529-8-git-send-email-jonathan.derrick@intel.com Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Jon Derrick <jonathan.derrick@intel.com>
2019-11-11x86/PCI: sta2x11: use default DMA address translationNicolas Saenz Julienne1-3/+0
The devices found behind this PCIe chip have unusual DMA mapping constraints as there is an AMBA interconnect placed in between them and the different PCI endpoints. The offset between physical memory addresses and AMBA's view is provided by reading a PCI config register, which is saved and used whenever DMA mapping is needed. It turns out that this DMA setup can be represented by properly setting 'dma_pfn_offset', 'dma_bus_mask' and 'dma_mask' during the PCI device enable fixup. And ultimately allows us to get rid of this device's custom DMA functions. Aside from the code deletion and DMA setup, sta2x11_pdev_to_mapping() is moved to avoid warnings whenever CONFIG_PM is not enabled. Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-03-20x86/dma: Use generic swiotlb_opsChristoph Hellwig1-0/+3
The generic swiotlb DMA ops were based on the x86 ones and provide equivalent functionality, so use them. Also fix the sta2x11 case. For that SOC the DMA map ops need an additional physical to DMA address translations. For swiotlb buffers that is done throught the phys_to_dma helper, but the sta2x11_dma_ops also added an additional translation on the return value from x86_swiotlb_alloc_coherent, which is only correct if that functions returns a direct allocation and not a swiotlb buffer. With the generic swiotlb and DMA-direct code phys_to_dma is not always used and the separate sta2x11_dma_ops can be replaced with a simple bit that marks if the additional physical to DMA address translation is needed. Tested-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Joerg Roedel <joro@8bytes.org> Cc: Jon Mason <jdmason@kudzu.us> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Muli Ben-Yehuda <mulix@mulix.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: iommu@lists.linux-foundation.org Link: http://lkml.kernel.org/r/20180319103826.12853-5-hch@lst.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman1-0/+1
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-24treewide: Move dma_ops from struct dev_archdata into struct deviceBart Van Assche1-3/+0
Some but not all architectures provide set_dma_ops(). Move dma_ops from struct dev_archdata into struct device such that it becomes possible on all architectures to configure dma_ops per device. Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Juergen Gross <jgross@suse.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: linux-arch@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: Russell King <linux@armlinux.org.uk> Cc: x86@kernel.org Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-01-24treewide: Constify most dma_map_ops structuresBart Van Assche1-2/+2
Most dma_map_ops structures are never modified. Constify these structures such that these can be write-protected. This patch has been generated as follows: git grep -l 'struct dma_map_ops' | xargs -d\\n sed -i \ -e 's/struct dma_map_ops/const struct dma_map_ops/g' \ -e 's/const struct dma_map_ops {/struct dma_map_ops {/g' \ -e 's/^const struct dma_map_ops;$/struct dma_map_ops;/' \ -e 's/const const struct dma_map_ops /const struct dma_map_ops /g'; sed -i -e 's/const \(struct dma_map_ops intel_dma_ops\)/\1/' \ $(git grep -l 'struct dma_map_ops intel_dma_ops'); sed -i -e 's/const \(struct dma_map_ops dma_iommu_ops\)/\1/' \ $(git grep -l 'struct dma_map_ops' | grep ^arch/powerpc); sed -i -e '/^struct vmd_dev {$/,/^};$/ s/const \(struct dma_map_ops[[:blank:]]dma_ops;\)/\1/' \ -e '/^static void vmd_setup_dma_ops/,/^}$/ s/const \(struct dma_map_ops \*dest\)/\1/' \ -e 's/const \(struct dma_map_ops \*dest = \&vmd->dma_ops\)/\1/' \ drivers/pci/host/*.c sed -i -e '/^void __init pci_iommu_alloc(void)$/,/^}$/ s/dma_ops->/intel_dma_ops./' arch/ia64/kernel/pci-dma.c sed -i -e 's/static const struct dma_map_ops sn_dma_ops/static struct dma_map_ops sn_dma_ops/' arch/ia64/sn/pci/pci_dma.c sed -i -e 's/(const struct dma_map_ops \*)//' drivers/misc/mic/bus/vop_bus.c Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Juergen Gross <jgross@suse.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: linux-arch@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: Russell King <linux@armlinux.org.uk> Cc: x86@kernel.org Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-01-15x86/PCI: Allow DMA ops specific to a PCI domainKeith Busch1-0/+10
The Intel Volume Management Device (VMD) is a PCIe endpoint that acts as a host bridge to another PCI domain. When devices below the VMD perform DMA, the VMD replaces their DMA source IDs with its own source ID. Therefore, those devices require special DMA ops. Add interfaces to allow the VMD driver to set up dma_ops for the devices below it. [bhelgaas: remove "extern", add "static", changelog] Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2012-11-15driver core / ACPI: Move ACPI support to core device and driver typesMika Westerberg1-3/+0
With ACPI 5 we are starting to see devices that don't natively support discovery but can be enumerated with the help of the ACPI namespace. Typically, these devices can be represented in the Linux device driver model as platform devices or some serial bus devices, like SPI or I2C devices. Since we want to re-use existing drivers for those devices, we need a way for drivers to specify the ACPI IDs of supported devices, so that they can be matched against device nodes in the ACPI namespace. To this end, it is sufficient to add a pointer to an array of supported ACPI device IDs, that can be provided by the driver, to struct device. Moreover, things like ACPI power management need to have access to the ACPI handle of each supported device, because that handle is used to invoke AML methods associated with the corresponding ACPI device node. The ACPI handles of devices are now stored in the archdata member structure of struct device whose definition depends on the architecture and includes the ACPI handle only on x86 and ia64. Since the pointer to an array of supported ACPI IDs is added to struct device_driver in an architecture-independent way, it is logical to move the ACPI handle from archdata to struct device itself at the same time. This also makes code more straightforward in some places and follows the example of Device Trees that have a poiter to struct device_node in there too. This changeset is based on Mika Westerberg's work. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: H. Peter Anvin <hpa@zytor.com> Acked-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-04-12x86-32: Introduce CONFIG_X86_DEV_DMA_OPSAlessandro Rubini1-2/+2
32-bit x86 systems may need their own DMA operations, so add a new config option, which is turned on for 64-bit systems. This patch has no functional effect but it paves the way for supporting the STA2x11 I/O Hub and possibly other chips. Signed-off-by: Alessandro Rubini <rubini@gnudd.com> Link: http://lkml.kernel.org/r/f79fcc1a2e17ef942e1b798b92aac43a80202532.1333560789.git.rubini@gnudd.com Acked-by: Giancarlo Asnaghi <giancarlo.asnaghi@st.com> Cc: Alan Cox <alan@linux.intel.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2011-09-21iommu: Rename the DMAR and INTR_REMAP config optionsSuresh Siddha1-1/+1
Change the CONFIG_DMAR to CONFIG_INTEL_IOMMU to be consistent with the other IOMMU options. Rename the CONFIG_INTR_REMAP to CONFIG_IRQ_REMAP to match the irq subsystem name. And define the CONFIG_DMAR_TABLE for the common ACPI DMAR routines shared by both CONFIG_INTEL_IOMMU and CONFIG_IRQ_REMAP. Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Cc: yinghai@kernel.org Cc: youquan.song@intel.com Cc: joerg.roedel@amd.com Cc: tony.luck@intel.com Cc: dwmw2@infradead.org Link: http://lkml.kernel.org/r/20110824001456.558630224@sbsiddha-desk.sc.intel.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-27x86/amd-iommu: Use dev->arch->iommu to store iommu related informationJoerg Roedel1-1/+1
This patch changes IOMMU code to use dev->archdata->iommu to store information about the alias device and the domain the device is attached to. This allows the driver to get rid of the amd_iommu_pd_table in the future. Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
2009-07-22Driver Core: Add platform device arch data V3Magnus Damm1-0/+3
Allow architecture specific data in struct platform_device V3. With this patch struct pdev_archdata is added to struct platform_device, similar to struct dev_archdata in found in struct device. Useful for architecture code that needs to keep extra data associated with each platform device. Struct pdev_archdata is different from dev.platform_data, the convention is that dev.platform_data points to driver-specific data. It may or may not be required by the driver. The format of this depends on driver but is the same across architectures. The structure pdev_archdata is a place for architecture specific data. This data is handled by architecture specific code (for example runtime PM), and since it is architecture specific it should _never_ be touched by device driver code. Exactly like struct dev_archdata but for platform devices. [rjw: This change is for power management mostly and that's why it goes through the suspend tree.] Signed-off-by: Magnus Damm <damm@igel.co.jp> Acked-by: Kevin Hilman <khilman@deeprootsystems.com> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2009-01-06x86, ia64: convert to use generic dma_map_ops structFUJITA Tomonori1-1/+1
This converts X86 and IA64 to use include/linux/dma-mapping.h. It's a bit large but pretty boring. The major change for X86 is converting 'int dir' to 'enum dma_data_direction dir' in DMA mapping operations. The major changes for IA64 is using map_page and unmap_page instead of map_single and unmap_single. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-22x86: Fix ASM_X86__ header guardsH. Peter Anvin1-3/+3
Change header guards named "ASM_X86__*" to "_ASM_X86_*" since: a. the double underscore is ugly and pointless. b. no leading underscore violates namespace constraints. Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2008-10-22x86, um: ... and asm-x86 moveAl Viro1-0/+16
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: H. Peter Anvin <hpa@zytor.com>