summaryrefslogtreecommitdiffstats
path: root/arch/x86/Kconfig
AgeCommit message (Collapse)AuthorFilesLines
2010-05-21Merge branch 'linux-next' of ↵Linus Torvalds1-0/+8
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6 * 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: (36 commits) PCI: hotplug: pciehp: Removed check for hotplug of display devices PCI: read memory ranges out of Broadcom CNB20LE host bridge PCI: Allow manual resource allocation for PCI hotplug bridges x86/PCI: make ACPI MCFG reserved error messages ACPI specific PCI hotplug: Use kmemdup PM/PCI: Update PCI power management documentation PCI: output FW warning in pci_read/write_vpd PCI: fix typos pci_device_dis/enable to pci_dis/enable_device in comments PCI quirks: disable msi on AMD rs4xx internal gfx bridges PCI: Disable MSI for MCP55 on P5N32-E SLI x86/PCI: irq and pci_ids patch for additional Intel Cougar Point DeviceIDs PCI: aerdrv: trivial cleanup for aerdrv_core.c PCI: aerdrv: trivial cleanup for aerdrv.c PCI: aerdrv: introduce default_downstream_reset_link PCI: aerdrv: rework find_aer_service PCI: aerdrv: remove is_downstream PCI: aerdrv: remove magical ROOT_ERR_STATUS_MASKS PCI: aerdrv: redefine PCI_ERR_ROOT_*_SRC PCI: aerdrv: rework do_recovery PCI: aerdrv: rework get_e_source() ...
2010-05-21PCI: read memory ranges out of Broadcom CNB20LE host bridgeIra W. Snyder1-0/+8
Read the memory ranges behind the Broadcom CNB20LE host bridge out of the hardware. This allows PCI hotplugging to work, since we know which memory range to allocate PCI BAR's from. The x86 PCI code automatically prefers the ACPI _CRS information when it is available. In that case, this information is not used. Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-05-18Merge branch 'core-hweight-for-linus' of ↵Linus Torvalds1-0/+5
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'core-hweight-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86, hweight: Use a 32-bit popcnt for __arch_hweight32() arch, hweight: Fix compilation errors x86: Add optimized popcnt variants bitops: Optimize hweight() by making use of compile-time evaluation
2010-05-18Merge branch 'x86-cleanups-for-linus' of ↵Linus Torvalds1-34/+15
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-cleanups-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86: Clean up arch/x86/Kconfig* x86-64: Don't export init_level4_pgt
2010-05-01hw-breakpoints: Separate constraint space for data and instruction breakpointsFrederic Weisbecker1-0/+1
There are two outstanding fashions for archs to implement hardware breakpoints. The first is to separate breakpoint address pattern definition space between data and instruction breakpoints. We then have typically distinct instruction address breakpoint registers and data address breakpoint registers, delivered with separate control registers for data and instruction breakpoints as well. This is the case of PowerPc and ARM for example. The second consists in having merged breakpoint address space definition between data and instruction breakpoint. Address registers can host either instruction or data address and the access mode for the breakpoint is defined in a control register. This is the case of x86 and Super H. This patch adds a new CONFIG_HAVE_MIXED_BREAKPOINTS_REGS config that archs can select if they belong to the second case. Those will have their slot allocation merged for instructions and data breakpoints. The others will have a separate slot tracking between data and instruction breakpoints. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Acked-by: Paul Mundt <lethal@linux-sh.org> Cc: Will Deacon <will.deacon@arm.com> Cc: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com> Cc: K. Prasad <prasad@linux.vnet.ibm.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Ingo Molnar <mingo@elte.hu>
2010-04-28x86: Clean up arch/x86/Kconfig*Jan Beulich1-34/+15
No functional change intended. Signed-off-by: Jan Beulich <jbeulich@novell.com> LKML-Reference: <4BCF2690020000780003B340@vpn.id2.novell.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-04-08Merge branch 'linus' into perf/coreIngo Molnar1-2/+2
Semantic conflict: arch/x86/kernel/cpu/perf_event_intel_ds.c Merge reason: pick up latest fixes, fix the conflict Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-04-06x86: Add optimized popcnt variantsBorislav Petkov1-0/+5
Add support for the hardware version of the Hamming weight function, popcnt, present in CPUs which advertize it under CPUID, Function 0x0000_0001_ECX[23]. On CPUs which don't support it, we fallback to the default lib/hweight.c sw versions. A synthetic benchmark comparing popcnt with __sw_hweight64 showed almost a 3x speedup on a F10h machine. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com> LKML-Reference: <20100318112015.GC11152@aftab> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-04-02x86: Increase CONFIG_NODES_SHIFT max to 10David Rientjes1-2/+2
Some larger systems require more than 512 nodes, so increase the maximum CONFIG_NODES_SHIFT to 10 for a new max of 1024 nodes. This was tested with numa=fake=64M on systems with more than 64GB of RAM. A total of 1022 nodes were initialized. Successfully builds with no additional warnings on x86_64 allyesconfig. ( No effect on any existing config. Newly enabled CONFIG_MAXSMP=y will see the new default. ) Signed-off-by: David Rientjes <rientjes@google.com> LKML-Reference: <alpine.DEB.2.00.1003251538060.8589@chino.kir.corp.google.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-22Merge commit 'v2.6.34-rc2' into perf/coreIngo Molnar1-2/+5
Merge reason: Pick up latest perf fixes from upstream. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-13Merge branch 'x86-fixes-for-linus' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86, k8 nb: Fix boot crash: enable k8_northbridges unconditionally on AMD systems x86, UV: Fix target_cpus() in x2apic_uv_x.c x86: Reduce per cpu warning boot up messages x86: Reduce per cpu MCA boot up messages x86_64, cpa: Don't work hard in preserving kernel 2M mappings when using 4K already
2010-03-13x86, k8 nb: Fix boot crash: enable k8_northbridges unconditionally on AMD ↵Borislav Petkov1-2/+2
systems de957628ce7c84764ff41331111036b3ae5bad0f changed setting of the x86_init.iommu.iommu_init function ptr only when GART IOMMU is found. One side effect of it is that num_k8_northbridges is not initialized anymore if not explicitly called. This resulted in uninitialized pointers in <arch/x86/kernel/cpu/intel_cacheinfo.c:amd_calc_l3_indices()>, for example, which uses the num_k8_northbridges thing through node_to_k8_nb_misc(). Fix that through an initcall that runs right after the PCI subsystem and does all the scanning. Then, remove initialization in gart_iommu_init() which is a rootfs_initcall and we're running before that. What is more, since num_k8_northbridges is being used in other places beside GART IOMMU, include it whenever we add AMD CPU support. The previous dependency chain in kconfig contained K8_NB depends on AGP_AMD64|GART_IOMMU which was clearly incorrect. The more natural way in terms of hardware dependency should be AGP_AMD64|GART_IOMMU depends on K8_NB depends on CPU_SUP_AMD && PCI. Make it so Number One! Signed-off-by: Borislav Petkov <borislav.petkov@amd.com> Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: Joerg Roedel <joerg.roedel@amd.com> LKML-Reference: <20100312144303.GA29262@aftab> Signed-off-by: Ingo Molnar <mingo@elte.hu> Tested-by: Joerg Roedel <joerg.roedel@amd.com>
2010-03-12pci-dma: x86: use include/linux/pci-dma.hFUJITA Tomonori1-0/+3
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-10perf, x86: Add INSTRUCTION_DECODER config flagIngo Molnar1-0/+3
The PEBS+LBR decoding magic needs the insn_get_length() infrastructure to be able to decode x86 instruction length. So split it out of KPROBES dependency and make it enabled when either KPROBES or PERF_EVENTS is enabled. Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Masami Hiramatsu <mhiramat@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-07Merge branch 'x86-mrst-for-linus' of ↵Linus Torvalds1-0/+15
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-mrst-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (30 commits) x86, mrst: Fix whitespace breakage in apb_timer.c x86, mrst: Fix APB timer per cpu clockevent x86, mrst: Remove X86_MRST dependency on PCI_IOAPIC x86, olpc: Use pci subarch init for OLPC x86, pci: Add arch_init to x86_init abstraction x86, mrst: Add Kconfig dependencies for Moorestown x86, pci: Exclude Moorestown PCI code if CONFIG_X86_MRST=n x86, numaq: Make CONFIG_X86_NUMAQ depend on CONFIG_PCI x86, pci: Add sanity check for PCI fixed bar probing x86, legacy_irq: Remove duplicate vector assigment x86, legacy_irq: Remove left over nr_legacy_irqs x86, mrst: Platform clock setup code x86, apbt: Moorestown APB system timer driver x86, mrst: Add vrtc platform data setup code x86, mrst: Add platform timer info parsing code x86, mrst: Fill in PCI functions in x86_init layer x86, mrst: Add dummy legacy pic to platform setup x86/PCI: Moorestown PCI support x86, ioapic: Add dummy ioapic functions x86, ioapic: Early enable ioapic for timer irq ... Fixed up semantic conflict of new clocksources due to commit 17622339af25 ("clocksource: add argument to resume callback").
2010-03-05Merge branch 'perf-probes-for-linus-2' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'perf-probes-for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86: Issue at least one memory barrier in stop_machine_text_poke() perf probe: Correct probe syntax on command line help perf probe: Add lazy line matching support perf probe: Show more lines after last line perf probe: Check function address range strictly in line finder perf probe: Use libdw callback routines perf probe: Use elfutils-libdw for analyzing debuginfo perf probe: Rename probe finder functions perf probe: Fix bugs in line range finder perf probe: Update perf probe document perf probe: Do not show --line option without dwarf support kprobes: Add documents of jump optimization kprobes/x86: Support kprobes jump optimization on x86 x86: Add text_poke_smp for SMP cross modifying code kprobes/x86: Cleanup save/restore registers kprobes/x86: Boost probes when reentering kprobes: Jump optimization sysctl interface kprobes: Introduce kprobes jump optimization kprobes: Introduce generic insn_slot framework kprobes/x86: Cleanup RELATIVEJUMP_INSTRUCTION to RELATIVEJUMP_OPCODE
2010-03-03Merge branch 'x86-bootmem-for-linus' of ↵Linus Torvalds1-0/+15
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-bootmem-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (30 commits) early_res: Need to save the allocation name in drop_range_partial() sparsemem: Fix compilation on PowerPC early_res: Add free_early_partial() x86: Fix non-bootmem compilation on PowerPC core: Move early_res from arch/x86 to kernel/ x86: Add find_fw_memmap_area Move round_up/down to kernel.h x86: Make 32bit support NO_BOOTMEM early_res: Enhance check_and_double_early_res x86: Move back find_e820_area to e820.c x86: Add find_early_area_size x86: Separate early_res related code from e820.c x86: Move bios page reserve early to head32/64.c sparsemem: Put mem map for one node together. sparsemem: Put usemap for one node together x86: Make 64 bit use early_res instead of bootmem before slab x86: Only call dma32_reserve_bootmem 64bit !CONFIG_NUMA x86: Make early_node_mem get mem > 4 GB if possible x86: Dynamically increase early_res array size x86: Introduce max_early_res and early_res_count ...
2010-03-02x86, mrst: Remove X86_MRST dependency on PCI_IOAPICJacob Pan1-1/+0
PCI_IOAPIC is used for PCI hotplug, Moorestown does not have ACPI PCI hotplug, as it does not have ACPI. This unnecessary dependency causes X86_MRST fail to be selected if ACPI is not selected. Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com> LKML-Reference: <1267550368-7435-1-git-send-email-jacob.jun.pan@linux.intel.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-02-27Merge branch 'tracing/core' of ↵Ingo Molnar1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/frederic/random-tracing into tracing/core
2010-02-25x86, mrst: Add Kconfig dependencies for MoorestownJacob Pan1-0/+4
The Moorestown platform requires IOAPIC for all interrupts from the south complex, since there is no legacy PIC. Furthermore, Moorestown I/O requires PCI. Moorestown PCI depends on PCI MMCONFIG and DIRECT method to perform device enumeration, as there is no PCI BIOS. [ hpa: rewrote commit message ] Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com> LKML-Reference: <1267120934-9505-1-git-send-email-jacob.jun.pan@linux.intel.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-02-25x86, numaq: Make CONFIG_X86_NUMAQ depend on CONFIG_PCIPan, Jacob jun1-0/+1
The NUMAQ initialization sets x86_init.pci.init to pci_numaq_init, which obviously isn't defined if CONFIG_PCI isn't defined. This dependency was implicit in the past, because pci_numaq_init was invoked from arch/x86/pci/legacy.c, which itself was conditioned on CONFIG_PCI. I suspect that no NUMA-Q machines without PCI were ever built, so instead of complicating the code by adding #ifdefs or stub functions, just disable this bit of the configuration space. [ hpa: rewrote the checkin comment ] Signed-off-by: Jacob Pan <jacob.jun.pan@intel.com> LKML-Reference: <43F901BD926A4E43B106BF17856F0755A321EE1F@orsmsx508.amr.corp.intel.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-02-25kprobes/x86: Support kprobes jump optimization on x86Masami Hiramatsu1-0/+1
Introduce x86 arch-specific optimization code, which supports both of x86-32 and x86-64. This code also supports safety checking, which decodes whole of a function in which probe is inserted, and checks following conditions before optimization: - The optimized instructions which will be replaced by a jump instruction don't straddle the function boundary. - There is no indirect jump instruction, because it will jumps into the address range which is replaced by jump operand. - There is no jump/loop instruction which jumps into the address range which is replaced by jump operand. - Don't optimize kprobes if it is in functions into which fixup code will jumps. This uses text_poke_multibyte() which doesn't support modifying code on NMI/MCE handler. However, since kprobes itself doesn't support NMI/MCE code probing, it's not a problem. Changes in v9: - Use *_text_reserved() for checking the probe can be optimized. - Verify jump address range is in 2G range when preparing slot. - Backup original code when switching optimized buffer, instead of preparing buffer, because there can be int3 of other probes in preparing phase. - Check kprobe is disabled in arch_check_optimized_kprobe(). - Strictly check indirect jump opcodes (ff /4, ff /5). Changes in v6: - Split stop_machine-based jump patching code. - Update comments and coding style. Changes in v5: - Introduce stop_machine-based jump replacing. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: systemtap <systemtap@sources.redhat.com> Cc: DLE <dle-develop@lists.sourceforge.net> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Anders Kaseorg <andersk@ksplice.com> Cc: Tim Abbott <tabbott@ksplice.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Jason Baron <jbaron@redhat.com> Cc: Mathieu Desnoyers <compudj@krystal.dyndns.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> LKML-Reference: <20100225133446.6725.78994.stgit@localhost6.localdomain6> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-24x86, apbt: Moorestown APB system timer driverJacob Pan1-0/+11
Moorestown platform does not have PIT or HPET platform timers. Instead it has a bank of eight APB timers. The number of available timers to the os is exposed via SFI mtmr tables. All APB timer interrupts are routed via ioapic rtes and delivered as MSI. Currently, we use timer 0 and 1 for per cpu clockevent devices, timer 2 for clocksource. Signed-off-by: Jacob Pan <jacob.jun.pan@intel.com> LKML-Reference: <43F901BD926A4E43B106BF17856F0755A318D2D2@orsmsx508.amr.corp.intel.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-02-17tracing/kprobes: Make Kconfig dependencies genericHeiko Carstens1-0/+1
KPROBES_EVENT actually depends on the regs and stack access API (b1cf540f) and not on x86. So introduce a new config option which architectures can select if they have the API implemented and switch x86. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Acked-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> LKML-Reference: <20100210162517.GB6933@osiris.boeblingen.de.ibm.com> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2010-02-16core: Move early_res from arch/x86 to kernel/Yinghai Lu1-0/+3
This makes the range reservation feature available to other architectures. -v2: add get_max_mapped, max_pfn_mapped only defined in x86... to fix PPC compiling -v3: according to hpa, add CONFIG_HAVE_EARLY_RES -v4: fix typo about EARLY_RES in config Signed-off-by: Yinghai Lu <yinghai@kernel.org> LKML-Reference: <4B7B5723.4070009@kernel.org> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-02-12x86: Make 32bit support NO_BOOTMEMYinghai Lu1-1/+0
Let's make 32bit consistent with 64bit. -v2: Andrew pointed out for 32bit that we should use -1ULL Signed-off-by: Yinghai Lu <yinghai@kernel.org> LKML-Reference: <1265793639-15071-25-git-send-email-yinghai@kernel.org> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-02-12x86: Make 64 bit use early_res instead of bootmem before slabYinghai Lu1-0/+13
Finally we can use early_res to replace bootmem for x86_64 now. Still can use CONFIG_NO_BOOTMEM to enable it or not. -v2: fix 32bit compiling about MAX_DMA32_PFN -v3: folded bug fix from LKML message below Signed-off-by: Yinghai Lu <yinghai@kernel.org> LKML-Reference: <4B747239.4070907@kernel.org> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-01-23x86: Remove "x86 CPU features in debugfs" (CONFIG_X86_CPU_DEBUG)H. Peter Anvin1-6/+0
CONFIG_X86_CPU_DEBUG, which provides some parsed versions of the x86 CPU configuration via debugfs, has caused boot failures on real hardware. The value of this feature has been marginal at best, as all this information is already available to userspace via generic interfaces. Causes crashes that have not been fixed + minimal utility -> remove. See the referenced LKML thread for more information. Reported-by: Ozan Çağlayan <ozan@pardus.org.tr> Signed-off-by: H. Peter Anvin <hpa@zytor.com> LKML-Reference: <alpine.LFD.2.00.1001221755320.13231@localhost.localdomain> Cc: Jaswinder Singh Rajput <jaswinder@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Rafael J. Wysocki <rjw@sisk.pl> Cc: Yinghai Lu <yinghai@kernel.org> Cc: <stable@kernel.org>
2010-01-11core, x86: make LIST_POISON less deadlyAvi Kivity1-0/+5
The list macros use LIST_POISON1 and LIST_POISON2 as undereferencable pointers in order to trap erronous use of freed list_heads. Unfortunately userspace can arrange for those pointers to actually be dereferencable, potentially turning an oops to an expolit. To avoid this allow architectures (currently x86_64 only) to override the default values for these pointers with truly-undereferencable values. This is easy on x86_64 as the virtual address space is large and contains areas that cannot be mapped. Other 64-bit architectures will likely find similar unmapped ranges. [ingo: switch to 0xdead000000000000 as the unmapped area] [ingo: add comments, cleanup] [jaswinder: eliminate sparse warnings] Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-01-11x86: add support for LZO-compressed kernelsAlbin Tonnerre1-0/+1
The necessary changes to the x86 Kconfig and boot/compressed to allow the use of this new compression method Signed-off-by: Albin Tonnerre <albin.tonnerre@free-electrons.com> Acked-by: H. Peter Anvin <hpa@zytor.com> Tested-by: Wu Zhangjin <wuzhangjin@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Tested-by: Russell King <rmk@arm.linux.org.uk> Acked-by: Russell King <rmk@arm.linux.org.uk> Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-18hw-breakpoints: Fix hardware breakpoints -> perf events dependencyFrederic Weisbecker1-0/+2
The kbuild's select command doesn't propagate through the config dependencies. Hence the current rules of hardware breakpoint's config can't ensure perf can never be disabled under us. We have: config X86 selects HAVE_HW_BREAKPOINTS config HAVE_HW_BREAKPOINTS select PERF_EVENTS config PERF_EVENTS [...] x86 will select the breakpoints but that won't propagate to perf events. The user can still disable the latter, but it is necessary for the breakpoints. What we need is: - x86 selects HAVE_HW_BREAKPOINTS and PERF_EVENTS - HAVE_HW_BREAKPOINTS depends on PERF_EVENTS so that we ensure PERF_EVENTS is enabled and frozen for x86. This fixes the following kind of build errors: In file included from arch/x86/kernel/hw_breakpoint.c:31: include/linux/hw_breakpoint.h: In function 'hw_breakpoint_addr': include/linux/hw_breakpoint.h:39: error: 'struct perf_event' has no member named 'attr' v2: Select also ANON_INODES from x86, required for perf Reported-by: Cyrill Gorcunov <gorcunov@gmail.com> Reported-by: Michal Marek <mmarek@suse.cz> Reported-by: Andrew Randrianasulu <randrik_a@yahoo.com> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Randy Dunlap <randy.dunlap@oracle.com> Cc: K.Prasad <prasad@linux.vnet.ibm.com> LKML-Reference: <1261010034-7786-1-git-send-regression-fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-12-15cs5535: drop the Geode-specific MFGPT/GPIO codeAndres Salomon1-10/+0
With generic modular drivers handling all of this stuff, the geode-specific code can go away. The cs5535-gpio, cs5535-mfgpt, and cs5535-clockevt drivers now handle this. Signed-off-by: Andres Salomon <dilinger@collabora.co.uk> Cc: Jordan Crouse <jordan@cosmicpenguin.net> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: john stultz <johnstul@us.ibm.com> Cc: Chris Ball <cjb@laptop.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-15ALSA: cs5535audio: free OLPC quirks from reliance on MGEODE_LX cpu optimizationAndres Salomon1-0/+1
Previously, OLPC support for the mic extensions was only enabled in the ALSA driver if CONFIG_OLPC and CONFIG_MGEODE_LX were both set. This was because the old geode GPIO code was written in a manner that assumed CONFIG_MGEODE_LX. With the new cs553x-gpio driver, this is no longer the case; as such, we can drop the requirement on CONFIG_MGEODE_LX and instead include a requirement on GPIOLIB. We use the generic GPIO API rather than the cs553x-specific API. Signed-off-by: Andres Salomon <dilinger@collabora.co.uk> Cc: Takashi Iwai <tiwai@suse.de> Cc: Jordan Crouse <jordan@cosmicpenguin.net> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-08Merge branch 'x86-fixes-for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86, mce: don't restart timer if disabled x86: Use -maccumulate-outgoing-args for sane mcount prologues x86: Prevent GCC 4.4.x (pentium-mmx et al) function prologue wreckage x86: AMD Northbridge: Verify NB's node is online x86 VSDO: Fix Kconfig help x86: Fix typo in Intel CPU cache size descriptor x86: Add new Intel CPU cache size descriptors
2009-12-08Merge branch 'x86-pat-for-linus' of ↵Linus Torvalds1-2/+5
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-pat-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86: pat: Remove ioremap_default() x86: pat: Clean up req_type special case for reserve_memtype() x86: Relegate CONFIG_PAT and CONFIG_MTRR configurability to EMBEDDED
2009-12-08Merge branch 'kvm-updates/2.6.33' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds1-0/+1
* 'kvm-updates/2.6.33' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (84 commits) KVM: VMX: Fix comparison of guest efer with stale host value KVM: s390: Fix prefix register checking in arch/s390/kvm/sigp.c KVM: Drop user return notifier when disabling virtualization on a cpu KVM: VMX: Disable unrestricted guest when EPT disabled KVM: x86 emulator: limit instructions to 15 bytes KVM: s390: Make psw available on all exits, not just a subset KVM: x86: Add KVM_GET/SET_VCPU_EVENTS KVM: VMX: Report unexpected simultaneous exceptions as internal errors KVM: Allow internal errors reported to userspace to carry extra data KVM: Reorder IOCTLs in main kvm.h KVM: x86: Polish exception injection via KVM_SET_GUEST_DEBUG KVM: only clear irq_source_id if irqchip is present KVM: x86: disallow KVM_{SET,GET}_LAPIC without allocated in-kernel lapic KVM: x86: disallow multiple KVM_CREATE_IRQCHIP KVM: VMX: Remove vmx->msr_offset_efer KVM: MMU: update invlpg handler comment KVM: VMX: move CR3/PDPTR update to vmx_set_cr3 KVM: remove duplicated task_switch check KVM: powerpc: Fix BUILD_BUG_ON condition KVM: VMX: Use shared msr infrastructure ... Trivial conflicts due to new Kconfig options in arch/Kconfig and kernel/Makefile
2009-12-03Merge remote branch 'tip/x86/entry' into kvm-updates/2.6.33Avi Kivity1-0/+1
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-11-21Merge branch 'tracing/hw-breakpoints' into perf/coreIngo Molnar1-0/+1
Conflicts: arch/x86/kernel/kprobes.c kernel/trace/Makefile Merge reason: hw-breakpoints perf integration is looking good in testing and in reviews, plus conflicts are mounting up - so merge & resolve. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-11x86 VSDO: Fix Kconfig helpRandy Dunlap1-1/+1
COMPAT_VDSO has 2 help text blocks, but kconfig only uses the last one found, so merge the 2 blocks. It would be real nice if kconfig would warn about this. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> LKML-Reference: <4AF9FB6C.70003@oracle.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-23x86: Remove STACKPROTECTOR_ALLArjan van de Ven1-4/+0
STACKPROTECTOR_ALL has a really high overhead (runtime and stack footprint) and is not really worth it protection wise (the normal STACKPROTECTOR is in effect for all functions with buffers already), so lets just remove the option entirely. Reported-by: Dave Jones <davej@redhat.com> Reported-by: Chuck Ebbert <cebbert@redhat.com> Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Cc: Eric Sandeen <sandeen@redhat.com> LKML-Reference: <20091023073101.3dce4ebb@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-18Merge commit 'perf/core' into perf/hw-breakpointFrederic Weisbecker1-62/+64
Conflicts: kernel/Makefile kernel/trace/Makefile kernel/trace/trace.h samples/Makefile Merge reason: We need to be uptodate with the perf events development branch because we plan to rewrite the breakpoints API on top of perf events.
2009-10-12x86: Relegate CONFIG_PAT and CONFIG_MTRR configurability to EMBEDDEDArjan van de Ven1-2/+5
MTRR and PAT support (which got added to CPUs over 10 years ago) are no longer really optional in that more and more things are depending on PAT just working, including various drivers and newer versions of X. (to not even speak of MTRR) Having this as a regular config option just no longer makes sense. This patch relegates CONFIG_X86_PAT to the EMBEDDED category so ultra-embedded can still disable it if they really need to. Also-Suggested-by: Roland Dreier <rdreier@cisco.com> Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Henrique de Moraes Holschuh <hmh@hmh.eng.br> LKML-Reference: <20091011103302.62bded41@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-08x86, vmi: Mark VMI deprecated and schedule it for removalAlok Kataria1-1/+10
Add text in feature-removal.txt indicating that VMI will be removed in the 2.6.37 timeframe. Signed-off-by: Alok N Kataria <akataria@vmware.com> Acked-by: Chris Wright <chrisw@sous-sol.org> LKML-Reference: <1254193238.13456.48.camel@ank32.eng.vmware.com> [ removed a bogus Kconfig change, marked (DEPRECATED) in Kconfig ] Signed-off-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-01core, x86: Add user return notifiersAvi Kivity1-0/+1
Add a general per-cpu notifier that is called whenever the kernel is about to return to userspace. The notifier uses a thread_info flag and existing checks, so there is no impact on user return or context switch fast paths. This will be used initially to speed up KVM task switching by lazily updating MSRs. Signed-off-by: Avi Kivity <avi@redhat.com> LKML-Reference: <1253342422-13811-1-git-send-email-avi@redhat.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-10-01x86, SLUB: Remove unused CONFIG FAST_CMPXCHG_LOCALJaswinder Singh Rajput1-4/+0
Remove unused CONFIG FAST_CMPXCHG_LOCAL from Kconfig. Reported-by: Robert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com> Acked-by: Christoph Lameter <cl@linux-foundation.org> Cc: Pekka Enberg <penberg@cs.helsinki.fi> Cc: Matt Mackall <mpm@selenic.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: "Robert P. J. Day" <rpjday@crashcourse.ca> Cc: linux-mm@kvack.org LKML-Reference: <1253981501.4568.61.camel@ht.satnam> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-27x86: Fix hwpoison code related build failure on 32-bit NUMAQLinus Torvalds1-0/+11
This build failure triggers: In file included from include/linux/suspend.h:8, from arch/x86/kernel/asm-offsets_32.c:11, from arch/x86/kernel/asm-offsets.c:2: include/linux/mm.h:503:2: error: #error SECTIONS_WIDTH+NODES_WIDTH+ZONES_WIDTH > BITS_PER_LONG - NR_PAGEFLAGS Because due to the hwpoison page flag we ran out of page flags on 32-bit. Dont turn on hwpoison on 32-bit NUMA (it's rare in any case). Also clean up the Kconfig dependencies in the generic MM code by introducing ARCH_SUPPORTS_MEMORY_FAILURE. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-23Merge git://git.infradead.org/iommu-2.6Linus Torvalds1-1/+1
* git://git.infradead.org/iommu-2.6: (23 commits) intel-iommu: Disable PMRs after we enable translation, not before intel-iommu: Kill DMAR_BROKEN_GFX_WA option. intel-iommu: Fix integer wrap on 32 bit kernels intel-iommu: Fix integer overflow in dma_pte_{clear_range,free_pagetable}() intel-iommu: Limit DOMAIN_MAX_PFN to fit in an 'unsigned long' intel-iommu: Fix kernel hang if interrupt remapping disabled in BIOS intel-iommu: Disallow interrupt remapping if not all ioapics covered intel-iommu: include linux/dmi.h to use dmi_ routines pci/dmar: correct off-by-one error in dmar_fault() intel-iommu: Cope with yet another BIOS screwup causing crashes intel-iommu: iommu init error path bug fixes intel-iommu: Mark functions with __init USB: Work around BIOS bugs by quiescing USB controllers earlier ia64: IOMMU passthrough mode shouldn't trigger swiotlb init intel-iommu: make domain_add_dev_info() call domain_context_mapping() intel-iommu: Unify hardware and software passthrough support intel-iommu: Cope with broken HP DC7900 BIOS iommu=pt is a valid early param intel-iommu: double kfree() intel-iommu: Kill pointless intel_unmap_single() function ... Fixed up trivial include lines conflict in drivers/pci/intel-iommu.c
2009-09-23Merge branch 'sfi-release' of ↵Linus Torvalds1-1/+3
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-sfi-2.6 * 'sfi-release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-sfi-2.6: SFI: remove unneeded includes sfi: Remove unused code SFI: Hook PCI MMCONFIG x86: add arch-specific SFI support SFI: add capability to parse ACPI tables SFI: add platform-independent core support SFI: create linux/sfi.h SFI: Simple Firmware Interface - MAINTAINERS, Kconfig
2009-09-23kcore: register text area in generic wayKAMEZAWA Hiroyuki1-0/+4
Some 64bit arch has special segment for mapping kernel text. It should be entried to /proc/kcore in addtion to direct-linear-map, vmalloc area. This patch unifies KCORE_TEXT entry scattered under x86 and ia64. I'm not familiar with other archs (mips has its own even after this patch) but range of [_stext ..._end) is a valid area of text and it's not in direct-map area, defining CONFIG_ARCH_PROC_KCORE_TEXT is only a necessary thing to do. Note: I left mips as it is now. Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: WANG Cong <xiyou.wangcong@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-21perf: Do the big rename: Performance Counters -> Performance EventsIngo Molnar1-1/+1
Bye-bye Performance Counters, welcome Performance Events! In the past few months the perfcounters subsystem has grown out its initial role of counting hardware events, and has become (and is becoming) a much broader generic event enumeration, reporting, logging, monitoring, analysis facility. Naming its core object 'perf_counter' and naming the subsystem 'perfcounters' has become more and more of a misnomer. With pending code like hw-breakpoints support the 'counter' name is less and less appropriate. All in one, we've decided to rename the subsystem to 'performance events' and to propagate this rename through all fields, variables and API names. (in an ABI compatible fashion) The word 'event' is also a bit shorter than 'counter' - which makes it slightly more convenient to write/handle as well. Thanks goes to Stephane Eranian who first observed this misnomer and suggested a rename. User-space tooling and ABI compatibility is not affected - this patch should be function-invariant. (Also, defconfigs were not touched to keep the size down.) This patch has been generated via the following script: FILES=$(find * -type f | grep -vE 'oprofile|[^K]config') sed -i \ -e 's/PERF_EVENT_/PERF_RECORD_/g' \ -e 's/PERF_COUNTER/PERF_EVENT/g' \ -e 's/perf_counter/perf_event/g' \ -e 's/nb_counters/nb_events/g' \ -e 's/swcounter/swevent/g' \ -e 's/tpcounter_event/tp_event/g' \ $FILES for N in $(find . -name perf_counter.[ch]); do M=$(echo $N | sed 's/perf_counter/perf_event/g') mv $N $M done FILES=$(find . -name perf_event.*) sed -i \ -e 's/COUNTER_MASK/REG_MASK/g' \ -e 's/COUNTER/EVENT/g' \ -e 's/\<event\>/event_id/g' \ -e 's/counter/event/g' \ -e 's/Counter/Event/g' \ $FILES ... to keep it as correct as possible. This script can also be used by anyone who has pending perfcounters patches - it converts a Linux kernel tree over to the new naming. We tried to time this change to the point in time where the amount of pending patches is the smallest: the end of the merge window. Namespace clashes were fixed up in a preparatory patch - and some stylistic fallout will be fixed up in a subsequent patch. ( NOTE: 'counters' are still the proper terminology when we deal with hardware registers - and these sed scripts are a bit over-eager in renaming them. I've undone some of that, but in case there's something left where 'counter' would be better than 'event' we can undo that on an individual basis instead of touching an otherwise nicely automated patch. ) Suggested-by: Stephane Eranian <eranian@google.com> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Paul Mackerras <paulus@samba.org> Reviewed-by: Arjan van de Ven <arjan@linux.intel.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: David Howells <dhowells@redhat.com> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: <linux-arch@vger.kernel.org> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-17 16:38:44 +0000