summaryrefslogtreecommitdiffstats
path: root/arch/tile/gxio
AgeCommit message (Collapse)AuthorFilesLines
2016-05-23Fix typoAndrea Gelmini1-1/+1
Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net> Signed-off-by: Chris Metcalf <cmetcalf@mellanox.com>
2015-09-10tile: use global strscpy() rather than private copyChris Metcalf1-29/+4
Now that strscpy() is a standard API, remove the local copy. Signed-off-by: Chris Metcalf <cmetcalf@ezchip.com>
2015-03-31ptp: tilegx: convert to the 64 bit get/set time methods.Richard Cochran1-2/+2
This driver is 64 bit only, and so this driver and device are ready for 2038. This patch changes the driver to the new PHC and also carries the timespec64 parameter on out to the gxio_mpipe_get- set_timestamp functions, making explicit the fact that the tv_sec field is 64 bits wide. Not even compile tested. Signed-off-by: Richard Cochran <richardcochran@gmail.com> Acked-by: Chris Metcalf <cmetcalf@ezchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-11arch: tile: gxio: Export symbols for module using in 'mpipe.c'Chen Gang1-0/+4
'gxio_mpipe_adjust_timestamp', 'gxio_mpipe_link_instance', 'gxio_mpipe_get_timestamp', and 'gxio_mpipe_set_timestamp' may be use by other tile modules, so export them. The related error (with allmodconfig under tile): MODPOST 4002 modules ERROR: "gxio_mpipe_link_instance" [drivers/net/ethernet/tile/tile_net.ko] undefined! ERROR: "gxio_mpipe_get_timestamp" [drivers/net/ethernet/tile/tile_net.ko] undefined! ERROR: "gxio_mpipe_set_timestamp" [drivers/net/ethernet/tile/tile_net.ko] undefined! ERROR: "gxio_mpipe_adjust_timestamp" [drivers/net/ethernet/tile/tile_net.ko] undefined! Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com> Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2014-10-02tile gxio: use better string copy primitiveChris Metcalf1-5/+32
Both strncpy and strlcpy suffer from the fact that they do partial copies of strings into the destination when the target buffer is too small. This is frequently pointless since an overflow of the target buffer may make the result invalid. strncpy() makes it relatively hard to even detect the error condition, and with strlcpy() you have to duplicate the buffer size parameter to test to see if the result exceeds it. By returning zero in the failure case, we both make testing for it easy, and by simply not copying anything in that case, we make it mandatory for callers to test the error code. To catch lazy programmers who don't check, we also place a NUL at the start of the destination buffer (if there is space) to ensure that the result is an invalid string. At some point it may make sense to promote strscpy() to a global platform-independent function, but other than the reviewers, no one was interested on LKML, so for now leave the strscpy() function as file-static. Reviewed-by: Randy Dunlap <rdunlap@infradead.org> Reviewed-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se> Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2013-09-16tile: improve gxio iorpc autogenerated code styleChris Metcalf5-76/+73
Fix some whitespace style issues in some auto-generated files. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2013-09-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tileLinus Torvalds5-0/+193
Pull Tile arch updates from Chris Metcalf: "These changes bring in a bunch of new functionality that has been maintained internally at Tilera over the last year, plus other stray bits of work that I've taken into the tile tree from other folks. The changes include some PCI root complex work, interrupt-driven console support, support for performing fast-path unaligned data fixups by kernel-based JIT code generation, CONFIG_PREEMPT support, vDSO support for gettimeofday(), a serial driver for the tilegx on-chip UART, KGDB support, more optimized string routines, support for ftrace and kprobes, improved ASLR, and many bug fixes. We also remove support for the old TILE64 chip, which is no longer buildable" * git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile: (85 commits) tile: refresh tile defconfig files tile: rework <asm/cmpxchg.h> tile PCI RC: make default consistent DMA mask 32-bit tile: add null check for kzalloc in tile/kernel/setup.c tile: make __write_once a synonym for __read_mostly tile: remove support for TILE64 tile: use asm-generic/bitops/builtin-*.h tile: eliminate no-op "noatomichash" boot argument tile: use standard tile_bundle_bits type in traps.c tile: simplify code referencing hypervisor API addresses tile: change <asm/system.h> to <asm/switch_to.h> in comments tile: mark pcibios_init() as __init tile: check for correct compiler earlier in asm-offsets.c tile: use standard 'generic-y' model for <asm/hw_irq.h> tile: use asm-generic version of <asm/local64.h> tile PCI RC: add comment about "PCI hole" problem tile: remove DEBUG_EXTRA_FLAGS kernel config option tile: add virt_to_kpte() API and clean up and document behavior tile: support FRAME_POINTER tile: support reporting Tilera hypervisor statistics ...
2013-09-03tilegx: provide kernel support for the tilegx UART shimChris Metcalf4-0/+170
The TILE-Gx chip includes an on-chip UART. This change adds support for using the UART from within the kernel. The UART shim has more functionality than is exposed here, but to keep the kernel code and binary simpler, this is a subset of the full API designed to enable a standard Linux tty serial driver only. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2013-08-06tile PCI RC: support more MSI-X interrupt vectorsChris Metcalf1-0/+23
To support PCIe devices with higher number of MSI-X interrupt vectors, e.g. 16 for the LSI RAID card, enhance the Gx RC stack to provide more MSI-X vectors by using the TRIO Scatter Queues, which provide 8 more vectors in addition to ~10 from the Map Mem regions. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2013-08-01tile: support PTP using the tilegx mPIPE (IEEE 1588)Chris Metcalf1-0/+19
Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-01tile: support multiple mPIPE shims in tilegx network driverChris Metcalf2-2/+41
The initial driver support was for a single mPIPE shim on the chip (as is the case for the Gx36 hardware). The Gx72 chip has two mPIPE shims, so we extend the driver to handle that case. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-01tile: support jumbo frames in the tilegx network driverChris Metcalf2-3/+62
Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-18arch/tile: provide kernel support for the tilegx USB shimChris Metcalf4-0/+196
This change adds support for accessing the USB shim from within the kernel. Note that this change by itself does not allow the kernel to act as a host or as a device; it merely exposes the built-in on-chip hardware to the kernel. The <arch/usb_host.h> and <arch/usb_host_def.h> headers are empty at the moment because the kernel does not require any types or definitions specific to the tilegx USB shim; the generic USB core code is all we need. The headers are left in as stubs so that we don't need to modify the hypervisor header (drv_usb_host_intf.h) from upstream. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2012-07-11arch/tile: provide kernel support for the tilegx TRIO shimChris Metcalf4-0/+383
Provide kernel support for the tilegx "Transaction I/O" (TRIO) on-chip hardware. This hardware implements the PCIe interface for tilegx; the driver changes to use TRIO for PCIe are in a subsequent commit. The change is layered on top of the tilegx GXIO IORPC subsystem. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2012-07-11arch/tile: provide kernel support for the tilegx mPIPE shimChris Metcalf5-0/+1166
The TILE-Gx chip includes a packet-processing network engine called mPIPE ("Multicore Programmable Intelligent Packet Engine"). This change adds support for using the mPIPE engine from within the kernel. The engine has more functionality than is exposed here, but to keep the kernel code and binary simpler, this is a subset of the full API designed to enable standard Linux networking only. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2012-07-11arch/tile: common DMA code for the GXIO IORPC subsystemChris Metcalf3-0/+183
The dma_queue support is used by both the mPipe (networking) and Trio (PCI) hardware shims on tilegx. This common code is selected when either of those drivers is built. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2012-07-11arch/tile: introduce GXIO IORPC framework for tilegxChris Metcalf4-0/+160
The GXIO I/O RPC subsystem handles exporting I/O hardware resources to Linux and to applications running under Linux. For instance, memory which is made available for I/O DMA must be mapped by an I/O TLB; that means that such memory must be locked down by Linux, so that it is not swapped or otherwise reused, as long as those I/O TLB entries are active. Similarly, configuring direct hardware access introduces new validation requirements. If a user application registers memory, Linux must ensure that the supplied virtual addresses are valid, and turn them into client physical addresses. Similarly, when Linux then supplies those client physical addresses to the Tilera hypervisor, it must in turn validate those before turning them into the real physical addresses which are required by the hardware. To the extent that these sorts of activities were required on previous TILE architecture processors, they were implemented in a device-specific fashion. This meant that every I/O device had its own Tilera hypervisor driver, its own Linux driver, and in some cases its own user-level library support. There was a large amount of more-or-less functionally identical code in different places, particularly in the different Linux drivers. For TILE-Gx, this support has been generalized into a common framework, known as the I/O RPC framework or just IORPC. The two "gxio" directories (one for headers, one for sources) start with just a few files in each with this infrastructure commit, but after adding support for the on-board I/O shims for networking, PCI, USB, crypto, compression, I2CS, etc., there end up being about 20 files in each directory. More information on the IORPC framework is in the <hv/iorpc.h> header, included in this commit. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>