| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Drop the remaining uses of extern for prototypes in .h files
in the sparc specific part of the kernel tree.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Fix following warnings:
irq_32.c:239:5: warning: symbol 'sparc_floppy_request_irq' was not declared. Should it be static?
irq_32.c:294:24: warning: symbol 'fdc_status' was not declared. Should it be static?
irq_32.c:297:6: warning: symbol 'pdma_vaddr' was not declared. Should it be static?
irq_32.c:300:15: warning: symbol 'pdma_size' was not declared. Should it be static?
irq_32.c:303:14: warning: symbol 'doing_pdma' was not declared. Should it be static?
irq_32.c:306:6: warning: symbol 'pdma_base' was not declared. Should it be static?
irq_32.c:309:15: warning: symbol 'pdma_areasize' was not declared. Should it be static?
irq_32.c:317:6: warning: symbol 'sparc_floppy_irq' was not declared. Should it be static?
The floppy parts were all added to iasm/setup.h - no other header files looked obvious.
floppy_32.h was not an option as this file can only be included once from the
floppy driver.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Fix following warnings:
sun4d_irq.c:146:6: warning: symbol 'sun4d_handler_irq' was not declared. Should it be static?
sun4d_irq.c:239:17: warning: symbol 'sun4d_irq' was not declared. Should it be static?
sun4d_irq.c:288:14: warning: symbol '_sun4d_build_device_irq' was not declared. Should it be static?
sun4d_irq.c:323:14: warning: symbol 'sun4d_build_device_irq' was not declared. Should it be static?
sun4d_irq.c:386:14: warning: symbol 'sun4d_build_timer_irq' was not declared. Should it be static?
sun4d_irq.c:482:13: warning: symbol 'sun4d_init_sbi_irq' was not declared. Should it be static?
Apply static when applicable, otherwise add prototype
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Fix following warnings:
sun4m_irq.c:308:6: warning: symbol 'sun4m_nmi' was not declared. Should it be static?
sun4m_irq.c:396:28: warning: incorrect type in assignment (different address spaces)
sun4m_irq.c:396:28: expected unsigned int volatile *extern [addressable] [toplevel] master_l10_counter
sun4d_irq.c:469:28: warning: incorrect type in assignment (different address spaces)
sun4d_irq.c:469:28: expected unsigned int volatile *extern [addressable] [toplevel] master_l10_counter
master_l10_counter is a pointer to __iomem - add annotations.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
- remove all uses of btfixup header
- remove the btfixup header
- remove the btfixup code
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Use sparc_config to hold the last two function pointers. There was no
point generating dedicated _ops structures only for these.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
I ended up renaming set_cpu_int to send_ipi to
be consistent all way around.
send_ipi was moved to the *_smp.c files so
we could call the relevant method direct,
without any _ops indirection.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
I left some around, like the ones in the openprom headers, since
we need to think about which pieces of those datastructures and
code we can completely toss now.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The kernel uses l14 timers as clockevents. l10 timer is used
as clocksource if platform master_l10_counter isn't constantly
zero. The clocksource is continuous, so it's possible to use
high resolution timers. l10 timer is also used as clockevent
on UP configurations.
This realization is for sun4m, sun4d, sun4c, microsparc-IIep
and LEON platforms. The appropriate LEON changes was made by
Konrad Eisele.
In case of sun4m's oneshot mode, profile irq is zeroed in
smp4m_percpu_timer_interrupt(). It is maybe
needless (double, triple etc overflow does nothing).
sun4d is able to have oneshot mode too, but I haven't
any way to test it. So code of its percpu timer handler
is made as much equal to the current code as possible.
The patch is tested on sun4m box in SMP mode by me,
and tested by Konrad on leon in up mode (leon smp
is broken atm - due to other reasons).
Signed-off-by: Tkhai Kirill <tkhai@yandex.ru>
Tested-by: Konrad Eisele <konrad@gaisler.com> [leon up]
[sam: revised patch to provide generic support for leon]
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This struct holds platform specific config and is thus not
limited to irq stuff.
Do not let the name confuse us to think this is irq only.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Disintegrate asm/system.h for Sparc.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: sparclinux@vger.kernel.org
|
|
timer interrupt
On Sun4d systems running in SMP mode, IRQ 14 is used for timer interrupts
and has a specialized interrupt handler. IPI is currently set to use IRQ 14
as well, which causes it to trigger the timer interrupt handler, and not the
IPI interrupt handler.
The IPI interrupt is therefore changed to IRQ 13, which is the highest
normally handled interrupt. This IRQ is also used for SBUS interrupts,
however there is nothing in the IPI/SBUS interrupt handlers that indicate
that they will not handle sharing the interrupt.
(IRQ 13 is indicated as audio interrupt, which is unlikely to be found in a
sun4d system)
Signed-off-by: Kjetil Oftedal <oftedal@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The sun4d does not seem to have a distingstion between soft and hard
IRQs. When generating IPIs the generated IRQ looks like a hard IRQ,
this patch adds a "IPI check" in the sun4d irq trap handler at a
predefined IRQ number (SUN4D_IPI_IRQ). Before generating an IPI
a per-cpu memory structure is modified for the "IPI check" to
successfully detect a IPI request to a specific processor, the check
clears the IPI work requested.
All three IPIs (resched, single and cpu-mask) use the same IRQ
number.
The IPI IRQ should preferrably be on a separate IRQ and definitly
not shared with IRQ handlers requesting IRQ with IRQF_SHARED.
Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The conversion of sparc32 to genirq is based on original work done
by David S. Miller.
Daniel Hellstrom has helped in the conversion and implemented
the shutdowm functionality.
Marcel van Nies <morcles@gmail.com> has tested this on Sparc Station 20
Test status:
sun4c - not tested
sun4m,pci - not tested
sun4m,sbus - tested (Sparc Classic, Sparc Station 5, Sparc Station 20)
sun4d - not tested
leon - tested on various combinations of leon boards,
including SMP variants
generic
Introduce use of GENERIC_HARDIRQS and GENERIC_IRQ_SHOW
Allocate 64 IRQs - which is enough even for SS2000
Use a table of irq_bucket to maintain uses IRQs
irq_bucket is also used to chain several irq's that
must be called when the same intrrupt is asserted
Use irq_link to link a interrupt source to the irq
All plafforms must now supply their own build_device_irq method
handler_irq rewriten to use generic irq support
floppy
Read FLOPPY_IRQ from platform device
Use generic request_irq to register the floppy interrupt
Rewrote sparc_floppy_irq to use the generic irq support
pcic:
Introduce irq_chip
Store mask in chip_data for use in mask/unmask functions
Add build_device_irq for pcic
Use pcic_build_device_irq in pci_time_init
allocate virtual irqs in pcic_fill_irq
sun4c:
Introduce irq_chip
Store mask in chip_data for use in mask/unmask functions
Add build_device_irq for sun4c
Use sun4c_build_device_irq in sun4c_init_timers
sun4m:
Introduce irq_chip
Introduce dedicated mask/unmask methods
Introduce sun4m_handler_data that allow easy access to necessary
data in the mask/unmask functions
Add a helper method to enable profile_timer (used from smp)
Added sun4m_build_device_irq
Use sun4m_build_device_irq in sun4m_init_timers
TODO:
There is no replacement for smp_rotate that always scheduled
next CPU as interrupt target upon an interrupt
sun4d:
Introduce irq_chip
Introduce dedicated mask/unmask methods
Introduce sun4d_handler_data that allow easy access to
necessary data in mask/unmask fuctions
Rewrote sun4d_handler_irq to use generic irq support
TODO:
The original implmentation of enable/disable had:
if (irq < NR_IRQS)
return;
The new implmentation does not distingush between SBUS and cpu
interrupts.
I am no sure what is right here. I assume we need to do
something for the cpu interrupts.
I have not succeeded booting my sun4d box (with or without this patch)
and my understanding of this platfrom is limited.
So I would be a bit suprised if this works.
leon:
Introduce irq_chip
Store mask in chip_data for use in mask/unmask functions
Add build_device_irq for leon
Use leon_build_device_irq in leon_init_timers
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Daniel Hellstrom <daniel@gaisler.com>
Tested-by: Daniel Hellstrom <daniel@gaisler.com>
Tested-by: Marcel van Nies <morcles@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
entry.S access percpu + global data defined in
sun4m_irq.c - so move the types to irq.h.
This makes sparse happy and allow us to utilize
asm-offsets later.
Also updated a few comments in the sun4m_irq.c file.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
build_device_irq() is used to encapsulate the plaform
specific details when we build an irq.
For now the default is a simple 1:1 but sun4d differs.
This patch refactors functionality - but does not change
the existing functionality.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
sparc_irq_config is used to hold the platform specific irq setup.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Unused.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Move stuff used only by arch/sparc/kernel/* into arch/sparc/kernel/irq.h
and into individual files in there (e.g. macros internal to sun4m_irq.c,
etc.)
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
