summaryrefslogtreecommitdiffstats
path: root/arch/sparc/Makefile
AgeCommit message (Collapse)AuthorFilesLines
2021-10-24kbuild: use more subdir- for visiting subdirectories while cleaningMasahiro Yamada1-3/+0
Documentation/kbuild/makefiles.rst suggests to use "archclean" for cleaning arch/$(SRCARCH)/boot/, but it is not a hard requirement. Since commit d92cc4d51643 ("kbuild: require all architectures to have arch/$(SRCARCH)/Kbuild"), we can use the "subdir- += boot" trick for all architectures. This can take advantage of the parallel option (-j) for "make clean". I also cleaned up the comments in arch/$(SRCARCH)/Makefile. The "archdep" target no longer exists. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Kees Cook <keescook@chromium.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
2021-09-03sparc: move the install rule to arch/sparc/MakefileMasahiro Yamada1-1/+2
Currently, the install target in arch/sparc/Makefile descends into arch/sparc/boot/Makefile to invoke the shell script, but there is no good reason to do so. arch/sparc/Makefile can run the shell script directly. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2021-05-26kbuild: require all architectures to have arch/$(SRCARCH)/KbuildMasahiro Yamada1-3/+0
arch/$(SRCARCH)/Kbuild is useful for Makefile cleanups because you can use the obj-y syntax. Add an empty file if it is missing in arch/$(SRCARCH)/. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2021-01-29arch: sparc: Remove CONFIG_OPROFILE supportViresh Kumar1-1/+0
The "oprofile" user-space tools don't use the kernel OPROFILE support any more, and haven't in a long time. User-space has been converted to the perf interfaces. Remove the old oprofile's architecture specific support. Suggested-by: Christoph Hellwig <hch@infradead.org> Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Robert Richter <rric@kernel.org> Acked-by: William Cohen <wcohen@redhat.com> Acked-by: Al Viro <viro@zeniv.linux.org.uk> Acked-by: Thomas Gleixner <tglx@linutronix.de>
2018-11-18sparc: generate uapi header and system call table filesFiroz Khan1-0/+3
System call table generation script must be run to gener- ate unistd_32/64.h and syscall_table_32/64/c32.h files. This patch will have changes which will invokes the script. This patch will generate unistd_32/64.h and syscall_table- _32/64/c32.h files by the syscall table generation script invoked by parisc/Makefile and the generated files against the removed files must be identical. The generated uapi header file will be included in uapi/- asm/unistd.h and generated system call table header file will be included by kernel/systbls_32/64.S file. Signed-off-by: Firoz Khan <firoz.khan@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-25Merge tag 'kbuild-v4.19-2' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull more Kbuild updates from Masahiro Yamada: - add build_{menu,n,g,x}config targets for compile-testing Kconfig - fix and improve recursive dependency detection in Kconfig - fix parallel building of menuconfig/nconfig - fix syntax error in clang-version.sh - suppress distracting log from syncconfig - remove obsolete "rpm" target - remove VMLINUX_SYMBOL(_STR) macro entirely - fix microblaze build with CONFIG_DYNAMIC_FTRACE - move compiler test for dead code/data elimination to Kconfig - rename well-known LDFLAGS variable to KBUILD_LDFLAGS - misc fixes and cleanups * tag 'kbuild-v4.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kbuild: rename LDFLAGS to KBUILD_LDFLAGS kbuild: pass LDFLAGS to recordmcount.pl kbuild: test dead code/data elimination support in Kconfig initramfs: move gen_initramfs_list.sh from scripts/ to usr/ vmlinux.lds.h: remove stale <linux/export.h> include export.h: remove VMLINUX_SYMBOL() and VMLINUX_SYMBOL_STR() Coccinelle: remove pci_alloc_consistent semantic to detect in zalloc-simple.cocci kbuild: make sorting initramfs contents independent of locale kbuild: remove "rpm" target, which is alias of "rpm-pkg" kbuild: Fix LOADLIBES rename in Documentation/kbuild/makefiles.txt kconfig: suppress "configuration written to .config" for syncconfig kconfig: fix "Can't open ..." in parallel build kbuild: Add a space after `!` to prevent parsing as file pattern scripts: modpost: check memory allocation results kconfig: improve the recursive dependency report kconfig: report recursive dependency involving 'imply' kconfig: error out when seeing recursive dependency kconfig: add build-only configurator targets scripts/dtc: consolidate include path options in Makefile
2018-08-24kbuild: rename LDFLAGS to KBUILD_LDFLAGSMasahiro Yamada1-2/+2
Commit a0f97e06a43c ("kbuild: enable 'make CFLAGS=...' to add additional options to CC") renamed CFLAGS to KBUILD_CFLAGS. Commit 222d394d30e7 ("kbuild: enable 'make AFLAGS=...' to add additional options to AS") renamed AFLAGS to KBUILD_AFLAGS. Commit 06c5040cdb13 ("kbuild: enable 'make CPPFLAGS=...' to add additional options to CPP") renamed CPPFLAGS to KBUILD_CPPFLAGS. For some reason, LDFLAGS was not renamed. Using a well-known variable like LDFLAGS may result in accidental override of the variable. Kbuild generally uses KBUILD_ prefixed variables for the internally appended options, so here is one more conversion to sanitize the naming convention. I did not touch Makefiles under tools/ since the tools build system is a different world. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Reviewed-by: Palmer Dabbelt <palmer@sifive.com>
2018-08-21sparc: fix KBUILD_DEFCONFIG for ARCH=sparc32Masahiro Yamada1-3/+3
As commit 5ba800962a80 ("kbuild: update ARCH alias info for sparc") addressed, SPARC accepts ARCH=sparc32 as an alias. However, arch/sparc/Makefile wrongly sets KBUILD_DEFCONFIG, then sparc64_defconfig is chosen as the base configuration for ARCH=sparc32. $ make ARCH=sparc32 defconfig *** Default configuration is based on 'sparc64_defconfig' # # configuration written to .config # Fix the logic to choose sparc64_defconfig only when ARCH=sparc64. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-01kbuild: add machine size to CHECKFLAGSLuc Van Oostenryck1-1/+1
By default, sparse assumes a 64bit machine when compiled on x86-64 and 32bit when compiled on anything else. This can of course create all sort of problems for the other archs, like issuing false warnings ('shift too big (32) for type unsigned long'), or worse, failing to emit legitimate warnings. Fix this by adding the -m32/-m64 flag, depending on CONFIG_64BIT, to CHECKFLAGS in the main Makefile (and so for all archs). Also, remove the now unneeded -m32/-m64 in arch specific Makefiles. Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-11-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparcLinus Torvalds1-0/+4
Pull sparc updates from David Miller: 1) Add missing cmpxchg64() for 32-bit sparc. 2) Timer conversions from Allen Pais and Kees Cook. 3) vDSO support, from Nagarathnam Muthusamy. 4) Fix sparc64 huge page table walks based upon bug report by Al Viro, from Nitin Gupta. 5) Optimized fls() for T4 and above, from Vijay Kumar. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc: sparc64: Fix page table walk for PUD hugepages sparc64: Convert timers to user timer_setup() sparc64: convert mdesc_handle.refcnt from atomic_t to refcount_t sparc/led: Convert timers to use timer_setup() sparc64: Use sparc optimized fls and __fls for T4 and above sparc64: SPARC optimized __fls function sparc64: SPARC optimized fls function sparc64: Define SPARC default __fls function sparc64: Define SPARC default fls function vDSO for sparc sparc32: Add cmpxchg64(). sbus: char: Move D7S_MINOR to include/linux/miscdevice.h sparc: time: Remove unneeded linux/miscdevice.h include sparc64: mmu_context: Add missing include files
2017-11-15vDSO for sparcNagarathnam Muthusamy1-0/+4
Following patch is based on work done by Nick Alcock on 64-bit vDSO for sparc in Oracle linux. I have extended it to include support for 32-bit vDSO for sparc on 64-bit kernel. vDSO for sparc is based on the X86 implementation. This patch provides vDSO support for both 64-bit and 32-bit programs on 64-bit kernel. vDSO will be disabled on 32-bit linux kernel on sparc. *) vclock_gettime.c contains all the vdso functions. Since data page is mapped before the vdso code page, the pointer to data page is got by subracting offset from an address in the vdso code page. The return address stored in %i7 is used for this purpose. *) During compilation, both 32-bit and 64-bit vdso images are compiled and are converted into raw bytes by vdso2c program to be ready for mapping into the process. 32-bit images are compiled only if CONFIG_COMPAT is enabled. vdso2c generates two files vdso-image-64.c and vdso-image-32.c which contains the respective vDSO image in C structure. *) During vdso initialization, required number of vdso pages are allocated and raw bytes are copied into the pages. *) During every exec, these pages are mapped into the process through arch_setup_additional_pages and the location of mapping is passed on to the process through aux vector AT_SYSINFO_EHDR which is used by glibc. *) A new update_vsyscall routine for sparc is added to keep the data page in vdso updated. *) As vDSO cannot contain dynamically relocatable references, a new version of cpu_relax is added for the use of vDSO. This change also requires a putback to glibc to use vDSO. For testing, programs planning to try vDSO can be compiled against the generated vdso(64/32).so in the source. Testing: ======== [root@localhost ~]# cat vdso_test.c int main() { struct timespec tv_start, tv_end; struct timeval tv_tmp; int i; int count = 1 * 1000 * 10000; long long diff; clock_gettime(0, &tv_start); for (i = 0; i < count; i++) gettimeofday(&tv_tmp, NULL); clock_gettime(0, &tv_end); diff = (long long)(tv_end.tv_sec - tv_start.tv_sec)*(1*1000*1000*1000); diff += (tv_end.tv_nsec - tv_start.tv_nsec); printf("Start sec: %d\n", tv_start.tv_sec); printf("End sec : %d\n", tv_end.tv_sec); printf("%d cycles in %lld ns = %f ns/cycle\n", count, diff, (double)diff / (double)count); return 0; } [root@localhost ~]# cc vdso_test.c -o t32_without_fix -m32 -lrt [root@localhost ~]# ./t32_without_fix Start sec: 1502396130 End sec : 1502396140 10000000 cycles in 9565148528 ns = 956.514853 ns/cycle [root@localhost ~]# cc vdso_test.c -o t32_with_fix -m32 ./vdso32.so.dbg [root@localhost ~]# ./t32_with_fix Start sec: 1502396168 End sec : 1502396169 10000000 cycles in 798141262 ns = 79.814126 ns/cycle [root@localhost ~]# cc vdso_test.c -o t64_without_fix -m64 -lrt [root@localhost ~]# ./t64_without_fix Start sec: 1502396208 End sec : 1502396218 10000000 cycles in 9846091800 ns = 984.609180 ns/cycle [root@localhost ~]# cc vdso_test.c -o t64_with_fix -m64 ./vdso64.so.dbg [root@localhost ~]# ./t64_with_fix Start sec: 1502396257 End sec : 1502396257 10000000 cycles in 380984048 ns = 38.098405 ns/cycle V1 to V2 Changes: ================= Added hot patching code to switch the read stick instruction to read tick instruction based on the hardware. V2 to V3 Changes: ================= Merged latest changes from sparc-next and moved the initialization of clocksource_tick.archdata.vclock_mode to time_init_early. Disabled queued spinlock and rwlock configuration when simulating 32-bit config to compile 32-bit VDSO. V3 to V4 Changes: ================= Hardcoded the page size as 8192 in linker script for both 64-bit and 32-bit binaries. Removed unused variables in vdso2c.h. Added -mv8plus flag to Makefile to prevent the generation of relocation entries for __lshrdi3 in 32-bit vdso binary. Signed-off-by: Nick Alcock <nick.alcock@oracle.com> Signed-off-by: Nagarathnam Muthusamy <nagarathnam.muthusamy@oracle.com> Reviewed-by: Shannon Nelson <shannon.nelson@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman1-0/+1
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-01sparc32: Add -Wa,-Av8 to KBUILD_CFLAGS.David S. Miller1-0/+6
Binutils used to be (erroneously) extremely permissive about instruction usage. But that got fixed and if you don't properly tell it to accept classes of instructions it will fail. This uncovered a specs bug on sparc in gcc where it wouldn't pass the proper options to binutils options. Deal with this in the kernel build by adding -Wa,-Av8 to KBUILD_CFLAGS. Reported-by: Al Viro <viro@ZenIV.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-04sparc: Add "install" targetDavid L Stevens1-0/+3
This patches adds an "install" target to install kernel builds for SPARC, modeled after the i386 script. Signed-off-by: David L Stevens <david.stevens@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-20sparc64: Hibernation supportTkhai Kirill1-0/+1
This patch adds CONFIG_HIBERNATION support for sparc64 architecture. The suspend function is the same as on another platforms. The restore function uses Bypass feature of MMU which allows to make the process more comfortable and plesant. Signed-off-by: Kirill Tkhai <tkhai@yandex.ru> CC: David Miller <davem@davemloft.net> CC: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-21Merge branch 'smp-hotplug-for-linus' of ↵Linus Torvalds1-1/+0
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull smp hotplug cleanups from Thomas Gleixner: "This series is merily a cleanup of code copied around in arch/* and not changing any of the real cpu hotplug horrors yet. I wish I'd had something more substantial for 3.5, but I underestimated the lurking horror..." Fix up trivial conflicts in arch/{arm,sparc,x86}/Kconfig and arch/sparc/include/asm/thread_info_32.h * 'smp-hotplug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (79 commits) um: Remove leftover declaration of alloc_task_struct_node() task_allocator: Use config switches instead of magic defines sparc: Use common threadinfo allocator score: Use common threadinfo allocator sh-use-common-threadinfo-allocator mn10300: Use common threadinfo allocator powerpc: Use common threadinfo allocator mips: Use common threadinfo allocator hexagon: Use common threadinfo allocator m32r: Use common threadinfo allocator frv: Use common threadinfo allocator cris: Use common threadinfo allocator x86: Use common threadinfo allocator c6x: Use common threadinfo allocator fork: Provide kmemcache based thread_info allocator tile: Use common threadinfo allocator fork: Provide weak arch_release_[task_struct|thread_info] functions fork: Move thread info gfp flags to header fork: Remove the weak insanity sh: Remove cpu_idle_wait() ...
2012-05-15sparc: introduce arch/sparc/KbuildSam Ravnborg1-2/+2
This allows us to do: make arch/sparc/ to build the core part of the sparc kernel. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-15sparc: clean up MakefileSam Ravnborg1-21/+10
- delete unused variables - align assignments - drop stale comments - kill use of "\" for line continuation Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-15sparc32: Build kernel with -mcpu=v8David S. Miller1-1/+1
With Cypress gone we can generate real hardware integer multiply and divide instructions at will. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-14sparc32: drop build time btfixup patchingSam Ravnborg1-12/+0
Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-12sparc32: Pass -mcpu=v7 explicitly to gcc.David S. Miller1-1/+1
We should be agnostic to what gcc happens to be generating by default. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-05sparc: Use generic init_taskThomas Gleixner1-1/+0
Same code. Use the generic version. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: "David S. Miller" <davem@davemloft.net> Acked-by: Sam Ravnborg <sam@ravnborg.org> Link: http://lkml.kernel.org/r/20120503085035.463573011@linutronix.de
2012-03-13sparc32: Add -Av8 to assembler command line.David S. Miller1-1/+1
Newer version of binutils are more strict about specifying the correct options to enable certain classes of instructions. The sparc32 build is done for v7 in order to support sun4c systems which lack hardware integer multiply and divide instructions. So we have to pass -Av8 when building the assembler routines that use these instructions and get patched into the kernel when we find out that we have a v8 capable cpu. Reported-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-16sparc32: added U-Boot build target: uImageDaniel Hellstrom1-1/+2
This is only for LEON as u-boot for SPARC only supports LEON. Signed-off-by: Daniel Hellstrom <daniel@gaisler.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-05sparc: Set UTS_MACHINE correctly.David S. Miller1-0/+2
"ARCH" can be just about anything, so we shouldn't end up with UTS_MACHINE of "sparc" in a 64-bit kernel build just because someone set the personality using 'sparc32' or similar. CONFIG_SPARC64 drives the compilation and therefore provides the definitive value, not "ARCH". This mirrors commit 8c6531f7a99f29ba8817ffb12cc9ecf190049bd6 (x86: correctly set UTS_MACHINE for "make ARCH=x86") Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-20arm, cris, mips, sparc, powerpc, um, xtensa: fix build with bash 4.0Sam Ravnborg1-4/+0
Albin Tonnerre <albin.tonnerre@free-electrons.com> reported: Bash 4 filters out variables which contain a dot in them. This happends to be the case of CPPFLAGS_vmlinux.lds. This is rather unfortunate, as it now causes build failures when using SHELL=/bin/bash to compile, or when bash happens to be used by make (eg when it's /bin/sh) Remove the common definition of CPPFLAGS_vmlinux.lds by pushing relevant stuff to either Makefile.build or the arch specific kernel/Makefile where we build the linker script. This is also nice cleanup as we move the information out where it is used. Notes for the different architectures touched: arm - we use an already exported symbol cris - we use a config symbol aleady available [Not build tested] mips - the jiffies complexity has moved to vmlinux.lds.S where we need it. Added a few variables to CPPFLAGS - they are only used by the linker script. [Not build tested] powerpc - removed assignment that is not needed [not build tested] sparc - simplified it using $(BITS) um - introduced a few new exported variables to deal with this xtensa - added options to CPP invocation [not build tested] Cc: Albin Tonnerre <albin.tonnerre@free-electrons.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Mikael Starvik <starvik@axis.com> Cc: Jesper Nilsson <jesper.nilsson@axis.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jeff Dike <jdike@addtoit.com> Cc: Chris Zankel <chris@zankel.net> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2009-08-16sparc64: build compressed image (zImage) by defaultJurij Smakov1-6/+6
Besides creating the uncompressed vmlinux image for sparc64, also create a compressed zImage. This is more consistent with other architectures and required to make the 'deb-pkg' target work. Signed-off-by: Jurij Smakov <jurij@wooyd.org> Signed-off-by: Frans Pop <elendil@planet.nl> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-04sparc: unify kernel/init_taskSam Ravnborg1-1/+1
A closer inspection revealed that these two files had identical functionality - but the implementation of it differed slightly. Base it on the sparc version as it was the best. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-04sparc,sparc64: unify boot/Sam Ravnborg1-5/+4
Simple unification: o renamed piggyback to *_32.c/*_64.c o copied content of Makefile from sparc64 to sparc and guard it o updated sparc/boot/.gitignore o deleted remaining files in sparc64/boot Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-04sparc,sparc64: unify kernel/Sam Ravnborg1-6/+3
o Move all files from sparc64/kernel/ to sparc/kernel - rename as appropriate o Update sparc/Makefile to the changes o Update sparc/kernel/Makefile to include the sparc64 files NOTE: This commit changes link order on sparc64! Link order had to change for either of sparc32 and sparc64. And assuming sparc64 see more testing than sparc32 change link order on sparc64 where issues will be caught faster. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-04sparc: prepare kernel/ for unificationSam Ravnborg1-2/+2
o sparc32 files with identical names to sparc64 renamed to <name>_32.S o introduced a few Kconfig helpers to simplify Makefile logic o refactored Makefile to prepare for unification - use obj-$(CONFIG_SPARC32) for sparc32 specific files - use <name>_$(BITS) for files where sparc64 has a _64 variant - sparc64 directly include a few files where sparc32 builds them, refer to these files directly (no BITS) - sneaked in -Werror as used by sparc64 o modified sparc/Makefile to use the new names for head/init_task Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-04sparc,sparc64: unify lib/Sam Ravnborg1-2/+1
o Renamed files in sparc64 to <name>_64.S when identical to sparc32 files. o iomap.c were equal for sparc32 and sparc64 o adjusted sparc/Makefile now we have only one lib/ Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-04sparc,sparc64: unify prom/Sam Ravnborg1-2/+1
- all files with identical names copied and renamed to *_64.c - the remaning files copied as is - added sparc64 specific files to sparc/prom/Makefile - teach sparc64 Makefile to look into sparc/prom/ - delete unused Makefile from sparc64/prom/ linking order was not kept for sparc64 with this change. It was not possible to keep linking order for both sparc and sparc64 and as sparc64 see more testing than sparc it was natural to break linking order on sparc64. Should it have any effect it would be detected sooner this way. printf_32.c and printf_64.c are obvious candidates to be merged but they are not 100% equal so that was left for later Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-04sparc,sparc64: unify MakefileSam Ravnborg1-13/+69
To unify Makefile for sparc and sparc64 a few other steps was needed: 1) separate defconfig files for sparc and sparc64 is required, so locate these in arch/sparc/configs 2) removoval of hack in toplevel Makefile to deal with that headers was in a separate directory compared to the rest The unification of the Makefile required usage of several foo-$(CONFIG_SPARCnn) += due to a few directories pending unification. This will be cleaned up when we unify the remaining directories. Included in this patch are the deletion of a few files in sparc64 as they are no longer needed: Makefile + Kconfig. arch/sparc64/ will after this patch is applied only have four directories (prom, lib, kernel, boot) Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-04sparc: clean boot/Sam Ravnborg1-2/+0
Leave all cleaning to boot/Makefile and delete zImage too when we do a 'make clean' Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-04sparc: refactor MakefileSam Ravnborg1-14/+6
The btfixup step needs knowledge of all the .o files, but there is no need to pass them in independent variables. Simplify it to use only two variables. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-04sparc,sparc64: add BITS to arch MakefileSam Ravnborg1-3/+4
BITS will be used to simplify unified Makefiles Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-08-24sparc: Add target for a stripped kernelMartin Habets1-2/+6
Add a target for a stripped kernel. This is used for the various packaging targets (*-pkg). Signed-off-by: Martin Habets <errandir_news@mph.eclipse.co.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-22sparc32: pass -m32 when building vmlinux.ldsStephen Rothwell1-0/+1
Otherwise it breaks since we merged asm/page.h Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-15kbuild: enable 'make AFLAGS=...' to add additional options to ASSam Ravnborg1-1/+1
The variable AFLAGS is a wellknown variable and the usage by kbuild may result in unexpected behaviour. On top of that several people over time has asked for a way to pass in additional flags to gcc. This patch replace use of AFLAGS with KBUILD_AFLAGS all over the tree. Patch was tested on following architectures: alpha, arm, i386, x86_64, mips, sparc, sparc64, ia64, m68k, s390 Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-10-14kbuild: enable 'make CFLAGS=...' to add additional options to CCSam Ravnborg1-3/+3
The variable CFLAGS is a wellknown variable and the usage by kbuild may result in unexpected behaviour. On top of that several people over time has asked for a way to pass in additional flags to gcc. This patch replace use of CFLAGS with KBUILD_CFLAGS all over the tree and enabling one to use: make CFLAGS=... to specify additional gcc commandline options. One usecase is when trying to find gcc bugs but other use cases has been requested too. Patch was tested on following architectures: alpha, arm, i386, x86_64, mips, sparc, sparc64, ia64, m68k Test was simple to do a defconfig build, apply the patch and check that nothing got rebuild. Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2006-10-17[SPARC]: Add sparc profiling supportMartin Habets1-0/+2
This patch adds profiling support to the sparc architecture. It is a copy of the sparc64 implementation. Signed-off-by: Martin Habets <errandir_news@mph.eclipse.co.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-12-12[SPARC]: block/ needed in final image linkPaul Jackson1-1/+1
With this fix, sparc links vmlinuz again using crosstool. Without this fix, the final link fails missing several dozen dozen symbols, beginning with: kernel/built-in.o(.text+0x6fd0): In function `do_exit': : undefined reference to `exit_io_context' (exit_io_context is defined in block/ll_rw_blk.c). Signed-off-by: Paul Jackson <pj@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-09-09kbuild: arm26,sparc use generic asm-offset supportSam Ravnborg1-11/+1
Rename all includes to use asm-offsets.h to match generic name Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2005-04-16Linux-2.6.12-rc2v2.6.12-rc2Linus Torvalds1-0/+78
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!