summaryrefslogtreecommitdiffstats
path: root/arch/sh
AgeCommit message (Collapse)AuthorFilesLines
2009-06-11sh: Fix sys_pwritev() syscall table entry for sh32.Paul Mundt1-1/+1
There was a typo here that had this as sys_writev() instead of sys_pwritev(), fix this up. sh64 got this right, as did the preadv() case. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-06-11sh: Fix sh4a llsc-based cmpxchg()Aoi Shinkai4-4/+31
This fixes up a typo in the ll/sc based cmpxchg code which apparently wasn't getting a lot of testing due to the swapped old/new pair. With that fixed up, the ll/sc code also starts using it and provides its own atomic_add_unless(). Signed-off-by: Aoi Shinkai <shinkoi2005@gmail.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-06-11sh: sh7724: Add JPU supportKuninori Morimoto1-0/+31
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Acked-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-06-11sh: sh7724: INTC setting updateKuninori Morimoto1-89/+82
This patch follows Rev 0.50 manual Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-06-11sh: sh7722 clock framework rewriteMagnus Damm2-660/+138
This patch rewrites the sh7722 clock framework code. The new code makes use of the recently merged div4, div6 and mstp32 helper code. Both extal and dll are supported as input clocks to the pll. While at it, now when all SuperH Mobile processors are converted, fix CONFIG_SH_CLK_CPG_LEGACY to depend on CONFIG_ARCH_SHMOBILE. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-06-11sh: sh7366 clock framework rewriteMagnus Damm4-43/+214
This patch rewrites the sh7366 clock framework code. The new code makes use of the recently merged div4, div6 and mstp32 helper code. Both extal and dll are supported as input clocks to the pll. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-06-11sh: sh7343 clock framework rewriteMagnus Damm4-34/+214
This patch rewrites the sh7343 clock framework code. The new code makes use of the recently merged div4, div6 and mstp32 helper code. Both extal and dll are supported as input clocks to the pll. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-06-11sh: sh7724 clock framework rewrite V3Magnus Damm4-82/+249
This patch contains V3 of the sh7724 clock framework rewrite. The new code makes use of the recently merged div4, div6 and mstp32 helper code. Both extal and fll are supported as input clocks to the pll. The div6 clocks are fed through a divide-by-3 block. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-06-11sh: sh7723 clock framework rewrite V2Magnus Damm4-58/+225
This patch contains V2 of the sh7723 clock framework rewrite. The new code makes use of the recently merged div4, div6 and mstp32 helper code. Both extal and dll are supported as input clocks to the pll. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-06-11sh: add enable()/disable()/set_rate() to div6 codeMagnus Damm3-0/+67
This patch updates the div6 clock helper code to add support for enable(), disable() and set_rate() callbacks. Needed by the camera clock enabling board code on Migo-R. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-06-11sh: add AP325RXA mode pin configurationMagnus Damm1-0/+12
This patch adds mode pin configuration to ap325rxa. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-06-11sh: add Migo-R mode pin configurationMagnus Damm1-0/+19
This patch adds mode pin configuration and a machvec structure to Migo-R. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-06-11sh: sh7722 mode pin definitionsMagnus Damm1-0/+14
This patch adds sh7722 mode pin and pin function controller comments. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-06-11sh: sh7724 mode pin commentsMagnus Damm1-0/+14
This patch adds comments for the sh7724 mode pins and pin function controller. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-06-11sh: sh7723 mode pin V2Magnus Damm1-0/+14
This patch is sh7723 mode pin V2. Mode pins and pin function controller comments are added. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-06-11sh: rework mode pin codeMagnus Damm5-28/+46
This patch reworks the mode pin code to keep the pin definitions in one place. The mode pins values are now the value of the bit instead of bit number. With this patch in place the sh7785 header file contains mode pin comments. The sh7785 clock code and the sh7785lcr board code are updated to reflect the new shared mode pins. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-06-11sh: clock div6 helper codeMagnus Damm2-6/+75
This patch adds div6 clock helper code. The div6 clocks are simply 6-bit divide-by-n modules where n is 1 to 64. Needed for vclk on sh7722, sh7723, sh7343 and sh7366. sh7724 needs this even more for vclk, fclka, fclkb, irdaclk and spuclk. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-06-11sh: clock div4 frequency table offset fixMagnus Damm1-2/+3
This patch fixes the per clock offset calculation in sh_clk_div4_register(). Without this patch the offset to the frequency table for each clock is incorrect. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-06-11Merge branch 'master' of ↵Paul Mundt1-1/+0
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6
2009-06-10sh: plug vsyscall dir in to archclean.Paul Mundt1-0/+1
The vsyscall targets are presently not cleaned up, so just handle it in the archclean rule. Reported-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-06-04sh: 16-bit get_unaligned() sh4a fixMagnus Damm1-5/+5
This patch fixes the 16-bit case of the sh4a specific unaligned access implementation. Without this patch the 16-bit version of sh4a get_unaligned() results in a 32-bit read which may read more data than intended and/or cross page boundaries. Unbreaks mtd NOR write handling on Migo-R. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-06-02sh: sh7723: L2 cache initialization.Kuninori Morimoto1-0/+10
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-06-02sh: sh7724: L2 cache initialization.Kuninori Morimoto1-0/+9
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-06-02sh: add weak l2_cache_init function.Kuninori Morimoto1-0/+7
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-06-02sh: add RAMCR definition for sh4Kuninori Morimoto1-0/+2
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-06-02sh: fix CONFIG_SH_PCLK_FREQ bug for sh7724Kuninori Morimoto2-3/+2
CONFIG_SH_PCLK_FREQ=33333333 is correct for sh7724. sh7724 master clock is 33333333, but peripheral is 41666666. This bug came to light because sh-sci driver had changed clk from "module_clk" to "peripheral_clk" Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-06-01sh: Tidy up SH-4A boot_cpu_data.flags probing.Paul Mundt3-50/+15
This tidies up the boot_cpu_data.flags probing on SH-4A. All of them have a few things in common, which we can blindly set, rather than having each subtype have to set the same flags. We can also make assumptions about cache ways and the validity of PTEA, so this also kills off CPU_HAS_PTEA as a config option. There was also a bug in the FPU probing, which is now tidied up. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-06-01sh: Tidy up the optional L2 probing, wire it up for SH7786.Paul Mundt1-28/+33
This tidies up the L2 probing, as it may or may not be implemented on a CPU, regardless of whether it is supported. This converts the cvr validity checks from BUG_ON()'s to simply clearing the CPU_HAS_L2_CACHE flag and moving on with life. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-06-01sh: hook up shared div4 clock code to sh7785Magnus Damm1-159/+48
Hook up the shared 4-bit divisor clock code to sh7785. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-06-01sh: shared div4 clock codeMagnus Damm2-0/+70
Add shared code for 4-bit divisor clocks. Processor specific code can use SH_CLK_DIV4() to initialize div4 clocks, and then use sh_clk_div4_register() for registration. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-06-01sh: hook up shared mstp32 clock code to sh7785Magnus Damm1-55/+25
Hook up the shared 32-bit module stop bit code to sh7785. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-06-01sh: shared mstp32 clock codeMagnus Damm2-0/+48
Add shared 32-bit module stop bit clock support. Processor specific code can use SH_CLK_MSTP32() to initialize module stop bit clocks, and then use sh_clk_mstp32() for registration. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-06-01sh: SH7724 has an L2 cache.Kuninori Morimoto1-1/+1
Add the CPU_HAS_L2_CACHE flag to SH7724. Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-06-01sh: sh7785 pll configuration from mode pinMagnus Damm1-6/+6
This patch modifies the sh7785 clock code to use the MODE4 value to switch between 72x and 36x PLL multiplication. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-06-01sh: sh7785lcr mode pin configurationMagnus Damm1-0/+22
This patch adds mode pin support to the sh7785lcr board. The harware allows the user to control the mode pins using dip switches S1 and S2, but from the software the pins are fixed to the factory default since we have no way to reading out this configuration from software. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-06-01sh: sh7785 mode pin definitionsMagnus Damm1-0/+24
This patch adds sh7785 mode pin definitions. Mode pins and pin function controller comments are added as well. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-06-01sh: boot word / mode pin support V2Magnus Damm4-0/+18
Add mode pin support for the SuperH architecture V2. With this patch applied the board code can add their own function to export the cpu mode pin configuration. In most cases this will be a constant bitmap, but boards that allow reading this from a register can instead read out the pin state from hardware. The code warns if a pin is tested but no board specific mode pin function has been provided. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-29flat: fix data sections alignmentOskar Schirmer1-1/+0
The flat loader uses an architecture's flat_stack_align() to align the stack but assumes word-alignment is enough for the data sections. However, on the Xtensa S6000 we have registers up to 128bit width which can be used from userspace and therefor need userspace stack and data-section alignment of at least this size. This patch drops flat_stack_align() and uses the same alignment that is required for slab caches, ARCH_SLAB_MINALIGN, or wordsize if it's not defined by the architecture. It also fixes m32r which was obviously kaput, aligning an uninitialized stack entry instead of the stack pointer. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Oskar Schirmer <os@emlix.com> Cc: David Howells <dhowells@redhat.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Bryan Wu <cooloney@kernel.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Paul Mundt <lethal@linux-sh.org> Cc: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Johannes Weiner <jw@emlix.com> Acked-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-05-27sh: pci-sh7780: Fix up for PCI_DISABLE_MWI changes.Paul Mundt1-6/+1
This fixes a build error where references to pci_cache_line_size are undefined, as this ceases to be exported when PCI_DISABLE_MWI is enabled, as is now the default. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-26Merge branch 'sh/clkfwk'Paul Mundt51-891/+1211
2009-05-26sh: pci: Disable MWI and make pci_dma_burst_advice() a bit more accurate.Paul Mundt1-2/+18
None of the SH PCI controllers support MWI, it is always treated as a direct memory write, so simply disable it outright. In the case of the PCI cache line size, consult that for the pci_dma_burst_advice() strategy, and switch over to PCI_DMA_BURST_MULTIPLE, as PPC64. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-26sh: pci-sh7751: Initialize io_map_base in controller definition.Paul Mundt1-3/+2
As there is only a single controller and remapping has no impact for the address range in question, just initialize it directly in the controller definition. This fixes up boot time warnings about not having the field initialized. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-26sh: Add a KBUILD_DEFCONFIG for sh64.Paul Mundt1-9/+10
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-26sh: remove clk_ops->build_rate_table()Magnus Damm2-3/+0
This patch removes the ->build_rate_table() callback, ->recalc() may instead be used for this purpose. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-26sh: use shared frequency tables on sh7785Magnus Damm1-65/+12
This patch converts the sh7785 clock code to make use of clk_rate_table_build() and clk_rate_table_round(). The ->build_rate_table() callback is removed, the table building is instead handled in ->recalc(). Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-26sh: add shared clock framework frequency table codeMagnus Damm2-0/+93
Add SuperH-specific clock framework helper functions: - clk_rate_table_build() - build cpufreq table from divisors/multipliers - clk_rate_table_round() - use cpufreq table to find matching frequency Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-26sh: add pll_clk to sh7785Magnus Damm1-15/+33
This patch converts the sh7785 pll implementation from the all-in-one code in frqmr_recalc() and frqmr_build_rate_table() to a separate struct clk. This allows us to remove the processor specific multiplier and use generic rate table functions. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-26sh: Record ms7724se in mach-types.Paul Mundt1-0/+1
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-26sh: Add ms7724se (SH7724) board supportKuninori Morimoto7-0/+2226
This adds preliminary support for the ms7724se solution engine board. Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-26sh: irq: Fix up imask build warnings.Paul Mundt1-2/+2
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-27 17:49:22 +0000