summaryrefslogtreecommitdiffstats
path: root/arch/sh/tools
AgeCommit message (Collapse)AuthorFilesLines
2012-05-10sh: Add RSK2+SH7269 boardPhil Edworthy1-0/+1
The RSK2+SH7269 board uses the SH7269 processor. It is often referred to as just rsk7269. NOR Flash, SDRAM, serial, USB Host and ethernet are working. Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-05-10sh: Add RSK2+SH7264 boardPhil Edworthy1-0/+1
The RSK2+SH7264 board uses the sh7264 processor. It is often referred to as just rsk7264. NOR Flash, SDRAM, serial, USB Host and ethernet are working. Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-01-13sh: Add support for AP-SH4AD-0A board.Paul Mundt1-0/+1
This adds preliminary support for the alpha project AP-SH4AD-0A reference platform (SH7786 based). Additional platform information available at: http://www.apnet.co.jp/product/superh/ap-sh4ad-0a.html Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-01-13sh: Add support for AP-SH4A-3A board.Paul Mundt1-0/+1
This adds preliminary support for the alpha project AP-SH4A-3A reference platform (SH7785 based). Additional paltform information available at: http://www.apnet.co.jp/product/superh/ap-sh4a-3a.html Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-01-13sh: Add a new mach type for alpha project boards.Paul Mundt1-0/+1
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-29sh: mach-systemh: Kill off dead board.Paul Mundt1-1/+0
This code has been untouched since it was merged many years ago, and has severely bitrotted since, suggesting that the board has no real users left. Notice of intent to remove has been sent out over the last few years, with no takers. Kill it off. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-07-06sh: add sh7757lcr board supportYoshihiro Shimoda1-0/+1
This adds preliminary support for the sh7757lcr board. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-06-21sh: SH-2007 board support.Hitoshi Mitake1-0/+1
This patch series adds support for ITO Co., Ltd.'s SH-2007 reference platform (A PC-104 based SH7780 platform). This is a direct port of the out-of-tree board support from the vendor's kernel, originally located at: http://ms-n.org/sh-linux/kernel/ More information on the board and the vendor can be obtained from the vendor's site at: http://www.itonet.co.jp/ Presently supported peripherals are CF and ethernet, with support for the on-board IDE still pending further testing. Reviewed-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Reviewed-by: Magnus Damm <magnus.damm@gmail.com> Signed-off-by: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-01-18Merge branch 'sh/stable-updates'Paul Mundt1-1/+1
2010-01-14sh: Preliminary SDK7786 board support.Paul Mundt1-0/+1
This stubs in some preliminary board support for the RTE SDK7786. This is quite stunted at the moment, and primarily builds on top of the system FPGA. FPGA IRQs are handled via CPU IRL masking for simplicity, with initial peripheral support restricted to the debug ethernet. Signed-off-by: Matt Fleming <matt@console-pimps.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-01-13Makefile: do not override LC_CTYPEMichal Marek1-1/+1
Setting LC_CTYPE=C breaks localized messages in some setups. With only LC_COLLATE=C and LC_NUMERIC=C, we get almost all we need, except for not so defined character classes and tolower()/toupper(). The former is not a big issue, because we can assume that e.g. [:alpha:] will always include a-zA-Z and we only ever process ASCII input. The latter seems only affect arch/sh/tools/gen-mach-types, which we can handle separately. So after this patch the meaning of ranges like [a-z], the behavior of sort and join, etc. should be the same everywhere and at the same time gcc should be able to print localized waring and error messages. LC_NUMERIC=C might not be necessary, but setting it doesn't hurt. Reported-by: Simon Horman <horms@verge.net.au> Reported-by: Sergei Trofimovich <slyfox@inbox.ru> Acked-by: H. Peter Anvin <hpa@zytor.com> Tested-by: Simon Horman <horms@verge.net.au> Tested-by: Masami Hiramatsu <mhiramat@redhat.com> Signed-off-by: Michal Marek <mmarek@suse.cz>
2009-12-12sh: move machtypes.h to include/generatedSam Ravnborg2-3/+3
Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Michal Marek <mmarek@suse.cz>
2009-08-28sh: sh7785lcr: fix prototype board on 32bit MMU mode.Yoshihiro Shimoda1-0/+1
Fix up PCA9564 resources on 32bit MMU mode using prototype board. Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Tested-by: Raul Porcel <armin76@gentoo.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-20sh: Add mach-types entry for EcoVec board.Paul Mundt1-0/+1
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-07-23sh: kfr2r09 board support - mach-type and defconfigMagnus Damm1-0/+1
This patch adds a defconfig and a mach-types entry for the kfr2r09 board. At this point only a few devices like SCIF, KEYSC and NOR Flash are supported together with sh7724 devices such as IIC0, IIC1 and the multimedia blocks exported via UIO. Kexec is supported, but booting from flash is not (yet). Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-26sh: Record ms7724se in mach-types.Paul Mundt1-0/+1
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-03-21sh: add support for SMSC Polaris platformSteve Glendinning1-0/+1
Polaris is an SMSC reference platform with a SH7709S CPU and LAN9118 ethernet controller. This patch adds support for it. Updated following feedback from Nobuhiro Iwamatsu. Signed-off-by: Steve Glendinning <steve.glendinning@smsc.com> Reviewed-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-03-17sh: espt-giga board supportNobuhiro Iwamatsu1-0/+1
This adds support for the ESPT-Giga (Ethernet Serial Parallel Translator) SH7763-based reference board. Board support is relatively sparse, presently supporting serial, gigabit ethernet, USB host, and MTD. More information (in Japanese) available at: http://www.cente.jp/product/cente_hard/ESPT-Giga.html Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-03-03sh: Urquell board support.Kuninori Morimoto1-0/+1
This adds preliminary support for the SH7786-based Urquell board. Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: Consolidate rsk7203/7201 in to a new mach-rsk.Paul Mundt1-0/+1
RSK+ platforms have quite a few characteristics in common, so roll them together in to a shiny new RSK mach-type. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: RSK+ 7201 board support.Peter Griffin1-0/+1
This patch adds support for the RTE RSK+ 7201 board. Signed-off-by: Peter Griffin <pgriffin@mpc-data.co.uk> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-10-28sh: Kill off long-dead HD64465 cchip support.Paul Mundt1-1/+0
This code has been dead for many years. The last update it received was in 2003 in order to update it for the driver model changes, though it had already been in disarray and unused before that point. The only boards that ever used this chip have not had users in many years either, so it is finally safe to just kill it off and move on with life. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-09-08sh: Add EDOSK7760 mach type.Paul Mundt1-0/+1
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-08-02sh: Revert the location change of auto-generated asm/machtypes.hPaul Mundt1-2/+2
This ended up causing build breakage on O= builds, as reported by Adrian: <-- snip --> ... CC init/main.o In file included from /home/bunk/linux/kernel-2.6/git/linux-2.6/arch/sh/include/asm/irq.h:4, from /home/bunk/linux/kernel-2.6/git/linux-2.6/include/linux/irq.h:23, from /home/bunk/linux/kernel-2.6/git/linux-2.6/arch/sh/include/asm/hardirq.h:5, from /home/bunk/linux/kernel-2.6/git/linux-2.6/include/linux/hardirq.h:7, from /home/bunk/linux/kernel-2.6/git/linux-2.6/include/asm-generic/local.h:5, from /home/bunk/linux/kernel-2.6/git/linux-2.6/arch/sh/include/asm/local.h:4, from /home/bunk/linux/kernel-2.6/git/linux-2.6/include/linux/module.h:19, from /home/bunk/linux/kernel-2.6/git/linux-2.6/init/main.c:13: /home/bunk/linux/kernel-2.6/git/linux-2.6/arch/sh/include/asm/machvec.h:15:27: error: asm/machtypes.h: No such file or directory make[2]: *** [init/main.o] Error 1 <-- snip --> So we simply move machtypes.h back to its original place. asm-offsets.h is still generated there regardless, until such a time that we find a better place to stash auto-generated files. Reported-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-29sh: migrate to arch/sh/include/Paul Mundt1-2/+2
This follows the sparc changes a439fe51a1f8eb087c22dd24d69cebae4a3addac. Most of the moving about was done with Sam's directions at: http://marc.info/?l=linux-sh&m=121724823706062&w=2 with subsequent hacking and fixups entirely my fault. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-28sh: Renesas R0P7785LC0011RL board supportYoshihiro Shimoda1-0/+1
This adds initial support for the Renesas R0P7785LC0011RL board. This patch supports 29bit address mode only. Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-28sh: Renesas Solutions SH7763RDP board supportNobuhiro Iwamatsu1-0/+1
This patch adds basic support for the SH7763RDP board. This supports a basic stuff provided in SH7763, like SCIF, NOR Flash and USB host. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-28sh: Add support Renesas Solutions AP-325RXA boardYusuke Goda1-0/+1
This board is SH7723 base board. This has SCIF, LCDC, USB Host controler, NOR/NAND Flash, Sound, Ether and other. This patch supports SCIF, NOR Flash. Signed-off-by: Yusuke Goda <goda.yusuke@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-28sh: RSK+ 7203 board support.Paul Mundt1-0/+1
This adds initial support for the RTE RSK+ SH7203 board. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-05-08sh: remove the broken SH_MPC1211 supportAdrian Bunk1-1/+0
SH_MPC1211 has been marked as BROKEN for some time. Unless someone is working on reviving it now, I'd therefore suggest this patch to remove it. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-04-18sh: Fix up mach-types formatting from merge damage.Paul Mundt1-3/+3
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-04-18sh: Add support for Solution Engine SH7721 boardYoshihiro Shimoda1-0/+1
Add support for Solution Engine SH7721 board(MS7721RP01). Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-03-06sh: Fix up SH7710 VoIP-GW build.Paul Mundt1-1/+0
The only board-specific bits that existed here were for setting up the IRQs, which are now handled by the SH7710 CPU support code instead. As there's nothing else to do for setup, kill off the board support code and have the defconfig use the generic machvec instead. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-02-14sh: Add mach-type entries for MigoR and SDK7780.Paul Mundt1-0/+2
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28sh: Kill off dead HS771RVoIP board support.Paul Mundt1-1/+0
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28sh: Move mach-cayman in with the rest of the boards.Paul Mundt1-0/+1
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-11-02sh: mach-type updates.Paul Mundt1-8/+21
This adds in the x3proto and magicpanelr2 mach types, plugs in highlander and rts7751r2d groups, and also hooks up the r2d subtypes. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-07-26sh: remove support for sh7300 and solution engine 7300Magnus Damm1-1/+0
This patch removes old dead code: - kill off sh7300 cpu support - get rid of broken solution engine 7300 board support Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-07-26sh: Kill the rest of the SE73180 cruft.Paul Mundt1-1/+0
There was a stray header, and the mach-type removal was also missed. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-07-12sh: fix race in parallel out-of-tree buildErik Johansson1-0/+1
Depending on which of the three dependencies for archprepare (in arch/sh/Makefile) get built first, the directory include/asm-sh may or may not exist when the maketools target is built. If the directory does not exist, awk will fail to generate machtypes.h. This patch fixes this by creating the directory before awk is executed. Signed-off-by: Erik Johansson <erik.johansson@motorola.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-06-08sh: Kill off dead SH7604 support.Paul Mundt1-1/+0
This was added during 2.5.x, but was never moved along. This can easily be resurrected if someone has one they wish to work with, but it's not worth keeping around in its current form. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-06-08sh: Add L-BOX RE2 to mach-types.Nobuhiro Iwamatsu1-0/+1
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-21sh: Fix up various compile warnings for SE boards.Paul Mundt1-2/+3
- setup-sh7750.c only defines the sh7751_ipr_map when building with SH7751 support. - 7722 Solution Engine was missing a mach-type entry, causing the macro in cf-enabler to be undefined. - arch/sh/mm/init.c needs linux/pagemap.h. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-07sh: SH7780 Solution Engine board support.Nobuhiro Iwamatsu1-0/+1
This adds support for the SH7780-based Solution Engine reference board. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.zh@hitachi.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-07sh: Add SH7785 Highlander board support (R7785RP).Paul Mundt1-0/+1
This adds preliminary support for the SH7785-based Highlander board. Some of the Highlander support code is reordered so that most of it can be reused directly. This also plugs in missing SH7785 checks in the places that need it, as this is the first board to support the CPU. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-02-14sh: Kill off dead bigsur and ec3104 boards.Paul Mundt1-1/+0
Neither of these have had any maintenance in years, and there's no interest in keeping them straggling along. These have already been slated for removal some time, so finally just get rid of them. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-06sh: Add support for SH7206 and SH7619 CPU subtypes.Yoshinori Sato1-0/+2
This implements initial support for the SH7206 (SH-2A) and SH7619 (SH-2) MMU-less CPUs. Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-10-03sh: Kill off remaining config.h references.Paul Mundt1-2/+0
A few of these managed to sneak back in, get rid of them once and for all. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27sh: Solution Engine SH7343 board support.Paul Mundt1-0/+1
This adds support for the SE7343 board. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27sh: SH7710VoIPGW board support.Paul Mundt1-0/+1
This adds support for the SH7710 VoIP Gateway board. Signed-off-by: Paul Mundt <lethal@linux-sh.org>