summaryrefslogtreecommitdiffstats
path: root/arch/sh/mm
AgeCommit message (Collapse)AuthorFilesLines
2011-03-23sh: pmb: Use struct syscore_ops instead of sysdevsPaul Mundt1-29/+14
This converts the PMB code over to use the new syscore_ops and kills off the old sysdev utilization, as per Rafael's example. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-02-15sh: Enable CONFIG_GCOV_PROFILE_ALL for shChris Smith1-0/+2
This patch enables gcov kernel profiling over the whole kernel for sh. Profiling of specific files individually already worked. A handful of files have to be explicitly excluded from the profiling to avoid breaking things, notably pmb.c. Signed-off-by: Chris Smith <chris.smith@st.com> Signed-off-by: Stuart Menefy <stuart.menefy@st.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-02-15sh: Flush executable pages in copy_user_highpageStuart Menefy1-1/+2
This resolves a problem seen when using the Android dynamic linker. Sometimes the dynamic linker would seg-fault at start up and this was eventually traced to the handling of a COW fault for a page which was being modified by the linker. If there was no cache aliasing between the kernel and the user page, the page was not flushed, leaving the newly copied data in the D-cache. However when executing instructions from that page, the I-cache is filled directly from external memory, rather than the D-cache, and causing garbage to be executed. Signed-off-by: Stuart Menefy <stuart.menefy@st.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-01-13thp: pte alloc trans splittingAndrea Arcangeli1-1/+1
pte alloc routines must wait for split_huge_page if the pmd is not present and not null (i.e. pmd_trans_splitting). The additional branches are optimized away at compile time by pmd_trans_splitting if the config option is off. However we must pass the vma down in order to know the anon_vma lock to wait for. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Acked-by: Rik van Riel <riel@redhat.com> Acked-by: Mel Gorman <mel@csn.ul.ie> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-13Merge branch 'sh-latest' of ↵Linus Torvalds1-2/+8
git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6 * 'sh-latest' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: (31 commits) sh: Add support for AP-SH4AD-0A board. sh: Add support for AP-SH4A-3A board. sh: Add a new mach type for alpha project boards. serial: sh-sci: build fixes. sh: sh7372 SH4AL-DSP probe support sh: sh7366 Enable SDIO IRQs sh: sh7343 Enable SDIO IRQs sh: mach-ecovec24: enable runtime PM for SDHI sh: sh7723 / ap325rxa enable SDIO IRQs sh: sh7722 Enable SDIO IRQs sh: sh7724 Enable SDIO IRQs sh: Fix up legacy PTEA space attribute mapping. sh: Stub out legacy PCC pgprot encoding for X2 TLBs. sh: constify prefetch pointers. sh: Add a machvec callback for early memblock reservations. sh: update sh7757lcr_defconfig sh: add PVR probing for SH7757 3rd cut sh: Use device_initcall() instead of __initcall() sh: intc - convert board specific landisk code sh: Move init_landisk_IRQ to header file ...
2011-01-11sh: Add a machvec callback for early memblock reservations.Paul Mundt1-2/+8
This adds in a callback to the machvec to allow platforms to do early reservations through memblock. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-12-22Merge branch 'master' into for-nextJiri Kosina7-21/+20
Conflicts: MAINTAINERS arch/arm/mach-omap2/pm24xx.c drivers/scsi/bfa/bfa_fcpim.c Needed to update to apply fixes for which the old branch was too outdated.
2010-12-01sh: Assume new page cache pages have dirty dcache lines.Paul Mundt4-11/+11
This follows the ARM change c01778001a4f5ad9c62d882776235f3f31922fdd ("ARM: 6379/1: Assume new page cache pages have dirty D-cache") for the same rationale: There are places in Linux where writes to newly allocated page cache pages happen without a subsequent call to flush_dcache_page() (several PIO drivers including USB HCD). This patch changes the meaning of PG_arch_1 to be PG_dcache_clean and always flush the D-cache for a newly mapped page in update_mmu_cache(). This addresses issues seen with executing binaries from MMC, in addition to some of the other HCDs that don't explicitly do cache management for their pipe-in buffers. Requested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-11-04sh: nommu: use 32-bit phys mode.Paul Mundt3-10/+9
The nommu code has regressed somewhat in that 29BIT gets set for the SH-2/2A configs regardless of the fact that they are really 32BIT sans MMU or PMB. This does a bit of tidying to get nommu properly selecting 32BIT as it was before. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-11-01tree-wide: fix comment/printk typosUwe Kleine-König1-1/+1
"gadget", "through", "command", "maintain", "maintain", "controller", "address", "between", "initiali[zs]e", "instead", "function", "select", "already", "equal", "access", "management", "hierarchy", "registration", "interest", "relative", "memory", "offset", "already", Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-10-27sh: lockless get_user_pages_fast()Paul Mundt2-1/+274
Implement get_user_pages_fast without locking in the fastpath on sh. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6Linus Torvalds12-53/+126
* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: (110 commits) sh: i2c-sh7760: Replase from ctrl_* to __raw_* sh: clkfwk: Shuffle around to match the intc split up. sh: clkfwk: modify for_each_frequency end condition sh: fix clk_get() error handling sh: clkfwk: Fix fault in frequency iterator. sh: clkfwk: Add a helper for rate rounding by divisor ranges. sh: clkfwk: Abstract rate rounding helper. sh: clkfwk: support clock remapping. sh: pci: Convert to upper/lower_32_bits() helpers. sh: mach-sdk7786: Add support for the FPGA SRAM. sh: Provide a generic SRAM pool for tiny memories. sh: pci: Support secondary FPGA-driven PCIe clocks on SDK7786. sh: pci: Support slot 4 routing on SDK7786. sh: Fix up PMB locking. sh: mach-sdk7786: Add support for fpga gpios. sh: use pr_fmt for clock framework, too. sh: remove name and id from struct clk sh: free-without-alloc fix for sh_mobile_lcdcfb sh: perf: Set up perf_max_events. sh: perf: Support SH-X3 hardware counters. ... Fix up trivial conflicts (perf_max_events got removed) in arch/sh/kernel/perf_event.c
2010-10-15sh: Provide a generic SRAM pool for tiny memories.Paul Mundt3-0/+39
This sets up a generic SRAM pool for CPUs and platform code to insert their otherwise unused memories into. A simple alloc/free interface is provided (lifed from avr32) for generic code. This only applies to tiny SRAMs that are otherwise unmanaged, and does not take in to account the more complex SRAMs sitting behind transfer engines, or that employ an I/D split. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-14sh: Fix up PMB locking.Paul Mundt1-16/+15
This first converts the PMB locking over to raw spinlocks, and secondly fixes up a nested locking issue that was triggering lockdep early on: swapper/0 is trying to acquire lock: (&pmbe->lock){......}, at: [<806be9bc>] pmb_init+0xf4/0x4dc but task is already holding lock: (&pmbe->lock){......}, at: [<806be98e>] pmb_init+0xc6/0x4dc other info that might help us debug this: 1 lock held by swapper/0: #0: (&pmbe->lock){......}, at: [<806be98e>] pmb_init+0xc6/0x4dc Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-12memblock, bootmem: Round pfn properly for memory and reserved regionsYinghai Lu1-2/+2
We need to round memory regions correctly -- specifically, we need to round reserved region in the more expansive direction (lower limit down, upper limit up) whereas usable memory regions need to be rounded in the more restrictive direction (lower limit up, upper limit down). This introduces two set of inlines: memblock_region_memory_base_pfn() memblock_region_memory_end_pfn() memblock_region_reserved_base_pfn() memblock_region_reserved_end_pfn() Although they are antisymmetric (and therefore are technically duplicates) the use of the different inlines explicitly documents the programmer's intention. The lack of proper rounding caused a bug on ARM, which was then found to also affect other architectures. Reported-by: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Yinghai Lu <yinghai@kernel.org> LKML-Reference: <4CB4CDFD.4020105@kernel.org> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2010-09-24sh: provide generic arch_debugfs_dir.Paul Mundt4-21/+6
While sh previously had its own debugfs root, there now exists a common arch_debugfs_dir prototype, so we switch everything over to that. Presumably once more architectures start making use of this we'll be able to just kill off the stub kdebugfs wrapper. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-09-23sh: change to new flag variablematt mooney1-1/+1
Replace EXTRA_CFLAGS with ccflags-y. Signed-off-by: matt mooney <mfm@muteddisk.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-08-16sh: stub __flush_tlb_global() definition for nommu.Paul Mundt1-0/+4
This fixes up the nommu build with a stub definition for __flush_tlb_global(), now used by the reboot code. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-08-04sh: Use __GFP_ZERO for dma_generic_alloc_coherent().Andrew Murray1-1/+2
This follows the x86 change off of memset() and on to an unconditional __GFP_ZERO for wrapping in to optimized page clearing by way of clear_highpage(). Signed-off-by: Andrew Murray <amurray@mpc-data.co.uk> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-08-04Merge branch 'master' of ↵Paul Mundt2-24/+24
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6
2010-08-04memblock/sh: Use new accessorsBenjamin Herrenschmidt1-8/+9
CC: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-07-14lmb: rename to memblockYinghai Lu2-24/+24
via following scripts FILES=$(find * -type f | grep -vE 'oprofile|[^K]config') sed -i \ -e 's/lmb/memblock/g' \ -e 's/LMB/MEMBLOCK/g' \ $FILES for N in $(find . -name lmb.[ch]); do M=$(echo $N | sed 's/lmb/memblock/g') mv $N $M done and remove some wrong change like lmbench and dlmb etc. also move memblock.c from lib/ to mm/ Suggested-by: Ingo Molnar <mingo@elte.hu> Acked-by: "H. Peter Anvin" <hpa@zytor.com> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-07-02sh: Provide a global TLB flush for U/I-TLB clear.Paul Mundt2-0/+21
This provides a sledgehammer approach for clearing the TLBs, only to be used in cases where we know we will never want to use the mappings again and have no interest in preserving state. This also destroys wired entries. The primary use for this is when we are either entering or exiting the kernel completely, in the latter case as a precursor for CPU reset by MMU. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-06-21sh: Fix up PUD trampling in ranged page table init for X2TLB.Paul Mundt1-14/+38
page_table_range_init() presently allocates a PUD page for the 3-level page table case on X2 TLB configurations on each successive call. This results in the previous PUD page being trampled when PMDs with an overlapping PUD are initialized. This case was triggered by putting persistent kmaps immediately below the fixmap range for highmem. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-06-21arch/sh/mm: Eliminate a double lockJulia Lawall1-1/+1
The function begins and ends with a read_lock. The latter is changed to a read_unlock. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @locked@ expression E1; position p; @@ read_lock(E1@p,...); @r exists@ expression x <= locked.E1; expression locked.E1; expression E2; identifier lock; position locked.p,p1,p2; @@ *lock@p1 (E1@p,...); ... when != E1 when != \(x = E2\|&x\) *lock@p2 (E1,...); // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Acked-by: Matt Fleming <matt@console-pimps.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-05-18sh: Fix up the NUMA build for recent LMB changes.Paul Mundt1-38/+0
Now that the node 0 initialization code has been overhauled, kill off the now obsolete setup_memory() bits. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-05-18sh: fix up CONFIG_KEXEC=n build.Paul Mundt1-1/+1
The reserve_crashkernel() definition is in asm/kexec.h which is only dragged in via linux/kexec.h if CONFIG_KEXEC is set. Just switch over to asm/kexec.h unconditionally to fix up the build. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-05-11sh: Reject small mappings for PMB bolting.Paul Mundt1-0/+2
The minimum section size for the PMB is 16M, so just always error out early if the specified size is too small. This permits us to unconditionally call in to pmb_bolt_mapping() with variable sizes without wasting a TLB and cache flush for the range. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-05-11sh: bootmem refactoring.Paul Mundt1-3/+162
This reworks much of the bootmem setup and initialization code allowing us to get rid of duplicate work between the NUMA and non-NUMA cases. The end result is that we end up with a much more flexible interface for supporting more complex topologies (fake NUMA, highmem, etc, etc.) which is entirely LMB backed. This is an incremental step for more NUMA work as well as gradually enabling migration off of bootmem entirely. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-05-10sh: enable LMB region setup via machvec.Paul Mundt1-1/+7
This plugs in a memory init callback in the machvec to permit boards to wire up various bits of memory directly in to LMB. A generic machvec implementation is provided that simply wraps around the normal Kconfig-derived memory start/size. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-04-26sh: Kill off dangling goto labels from oom-killer rework.Paul Mundt2-2/+0
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-04-26Merge branch 'sh/stable-updates'Paul Mundt7-3/+4
Conflicts: arch/sh/kernel/dwarf.c drivers/dma/shdma.c Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-04-26Merge branch 'master' of ↵Paul Mundt1-1/+1
master.kernel.org:/pub/scm/linux/kernel/git/mfleming/sh-2.6 * 'master' of master.kernel.org:/pub/scm/linux/kernel/git/mfleming/sh-2.6: sh: Use correct mask when comparing PMB DATA array values sh: Do not try merging two 128MB PMB mappings sh: Fix zImage load address when CONFIG_32BIT=y sh: Fix address to decompress at when CONFIG_32BIT=y sh: Assembly friendly __pa and __va definitions
2010-04-26sh: invoke oom-killer from page faultNick Piggin2-24/+8
As explained in commit 1c0fe6e3bd, we want to call the architecture independent oom killer when getting an unexplained OOM from handle_mm_fault, rather than simply killing current. Cc: linux-sh@vger.kernel.org Cc: linux-arch@vger.kernel.org Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: David Rientjes <rientjes@google.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-04-25sh: Do not try merging two 128MB PMB mappingsMatt Fleming1-1/+1
There is a logic error in pmb_merge() that means we will incorrectly try to merge two 128MB PMB mappings into one mapping. However, 256MB isn't a valid PMB map size and pmb_merge() will actually drop the second 128MB mapping. This patch allows my SDK7786 board to boot when configured with CONFIG_MEMORY_SIZE=0x10000000. Signed-off-by: Matt Fleming <matt@console-pimps.org>
2010-04-20sh: Zero out aliases counter when using SH-X3 hardware assistance.Paul Mundt1-1/+10
This zeroes out the number of cache aliases in the cache info descriptors when hardware alias avoidance is enabled. This cuts down on the amount of flushing taken care of by common code, and also permits coherency control to be disabled for the single CPU and 4k page size case. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-04-19sh: Enable SH-X3 hardware synonym avoidance handling.Paul Mundt3-0/+43
This enables support for the hardware synonym avoidance handling on SH-X3 CPUs for the case where dcache aliases are possible. icache handling is retained, but we flip on broadcasting of the block invalidations due to the lack of coherency otherwise on SMP. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-04-05Merge branch 'sh/stable-updates'Paul Mundt4-28/+75
2010-04-05Merge branch 'master' into export-slabhTejun Heo5-33/+92
2010-04-02sh: Fix up the SH-3 build for recent TLB changes.Paul Mundt4-28/+75
While the MMUCR.URB and ITLB/UTLB differentiation works fine for all SH-4 and later TLBs, these features are absent on SH-3. This splits out local_flush_tlb_all() in to SH-4 and PTEAEX copies while restoring the old SH-3 one, subsequently fixing up the build. This will probably want some further reordering and tidying in the future, but that's out of scope at present. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-03-30include cleanup: Update gfp.h and slab.h includes to prepare for breaking ↵Tejun Heo7-3/+4
implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-29sh: tlb debugfs support.Matt Fleming2-3/+184
Export the status of the utlb and itlb entries through debugfs. Signed-off-by: Matt Fleming <matt@console-pimps.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-03-26sh: update the TLB replacement counter for entry wiring.Matt Fleming1-5/+17
Presently the TLB wiring code depends on MMUCR.URB for working out where to place the wired entry, but fails to take the replacment counter in to consideration. This fixes up the wiring logic and ensures that wired entries remain so. Signed-off-by: Matt Fleming <matt@console-pimps.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-03-23sh: Fix build after dynamic PMB reworkMatt Fleming1-0/+2
set_pmb_entry() is now only used by a function that is wrapped in #ifdef CONFIG_PM, so wrap set_pmb_entry() in CONFIG_PM too. Signed-off-by: Matt Fleming <matt@console-pimps.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-03-23sh: Replace unsafe manipulation of MMUCRMatt Fleming2-7/+16
Setting the TI in MMUCR causes all the TLB bits in MMUCR to be cleared. Unfortunately, the TLB wired bits are also cleared when setting the TI bit, causing any wired TLB entries to become unwired. Use local_flush_tlb_all() which implements TLB flushing in a safer manner by using the memory-mapped TLB registers. As each CPU has its own PMB the modifications in pmb_init() only affect the local CPU, so only flush the local CPU's TLB. Signed-off-by: Matt Fleming <matt@console-pimps.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-03-23sh: Flush ITLB too in PTEAEX's flush_tlb_page()Matt Fleming1-0/+2
flush_tlb_page() can be used to flush TLB entries that map executable pages. Therefore, we need to ensure that the ITLB is also flushed in local_flush_tlb_page(). Signed-off-by: Matt Fleming <matt@console-pimps.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-03-10sh: Export uncached helper symbols.Paul Mundt1-0/+4
oprofile and others need to get at these, so provide symbol exports. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-03-08sh: Fix up uncached offset for legacy 29-bit mode.Paul Mundt1-0/+5
The uncached_start was being set up properly for 32-bit but managed to break 29-bit in the process, fix it up. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-03-05sh: Move PMB debugfs entry initialization to later stagePawel Moll1-1/+1
... so the "sh_debugfs_root" is already available. Previously it wasn't and in result its path was "/sys/kernel/debug/pmb" instead of "/sys/kernel/debug/sh/pmb". Signed-off-by: Pawel Moll <pawel.moll@st.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-03-04sh: fix up MMU reset with variable PMB mapping sizes.Paul Mundt1-6/+31
Presently we run in to issues with the MMU resetting the CPU when variable sized mappings are employed. This takes a slightly more aggressive approach to keeping the TLB and cache state sane before establishing the mappings in order to cut down on races observed on SMP configurations. At the same time, we bump the VMA range up to the 0xb000...0xc000 range, as there still seems to be some undocumented behaviour in setting up variable mappings in the 0xa000...0xb000 range, resulting in reset by the TLB. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-06 12:16:01 +0000