summaryrefslogtreecommitdiffstats
path: root/arch/sh/kernel/perf_event.c
AgeCommit message (Collapse)AuthorFilesLines
2013-07-14sh: delete __cpuinit usage from all sh filesPaul Gortmaker1-2/+2
The __cpuinit type of throwaway sections might have made sense some time ago when RAM was more constrained, but now the savings do not offset the cost and complications. For example, the fix in commit 5e427ec2d0 ("x86: Fix bit corruption at CPU resume time") is a good example of the nasty type of bugs that can be created with improper use of the various __init prefixes. After a discussion on LKML[1] it was decided that cpuinit should go the way of devinit and be phased out. Once all the users are gone, we can then finally remove the macros themselves from linux/init.h. Note that some harmless section mismatch warnings may result, since notify_cpu_starting() and cpu_up() are arch independent (kernel/cpu.c) are flagged as __cpuinit -- so if we remove the __cpuinit from arch specific callers, we will also get section mismatch warnings. As an intermediate step, we intend to turn the linux/init.h cpuinit content into no-ops as early as possible, since that will get rid of these warnings. In any case, they are temporary and harmless. This removes all the arch/sh uses of the __cpuinit macros from all C files. Currently sh does not have any __CPUINIT used in assembly files. [1] https://lkml.org/lkml/2013/5/20/589 Cc: Paul Mundt <lethal@linux-sh.org> Cc: linux-sh@vger.kernel.org Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-03-05perf: Disable PERF_SAMPLE_BRANCH_* when not supportedStephane Eranian1-0/+4
PERF_SAMPLE_BRANCH_* is disabled for: - SW events (sw counters, tracepoints) - HW breakpoints - ALL but Intel x86 architecture - AMD64 processors Signed-off-by: Stephane Eranian <eranian@google.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1328826068-11713-10-git-send-email-eranian@google.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-10-31sh: Add export.h to arch/sh specific files as required.Paul Gortmaker1-0/+1
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2010-12-16perf: Dynamic pmu typesPeter Zijlstra1-1/+1
Extend the perf_pmu_register() interface to allow for named and dynamic pmu types. Because we need to support the existing static types we cannot use dynamic types for everything, hence provide a type argument. If we want to enumerate the PMUs they need a name, provide one. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <20101117222056.259707703@chello.nl> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-10-15Merge remote branch 'tip/perf/core' into oprofile/coreRobert Richter1-47/+94
Conflicts: arch/arm/oprofile/common.c kernel/perf_event.c
2010-10-11perf: New helper function for pmu nameMatt Fleming1-0/+9
Introduce perf_pmu_name() helper function that returns the name of the pmu. This gives us a generic way to get the name of a pmu regardless of how an architecture identifies it internally. Signed-off-by: Matt Fleming <matt@console-pimps.org> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Robert Richter <robert.richter@amd.com>
2010-10-11perf: Add helper function to return number of countersMatt Fleming1-0/+9
The number of counters for the registered pmu is needed in a few places so provide a helper function that returns this number. Signed-off-by: Matt Fleming <matt@console-pimps.org> Tested-by: Will Deacon <will.deacon@arm.com> Acked-by: Paul Mundt <lethal@linux-sh.org> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Robert Richter <robert.richter@amd.com>
2010-09-15perf, sh: Fix patch merge foul-upMatt Fleming1-1/+1
3f6da390 ("perf: Rework and fix the arch CPU-hotplug hooks") introduced this breakage. sh_pmu_setup() is missing an opening curly brace. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <20100913191729.GA6440@console-pimps.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-09-09perf: Rework the PMU methodsPeter Zijlstra1-24/+51
Replace pmu::{enable,disable,start,stop,unthrottle} with pmu::{add,del,start,stop}, all of which take a flags argument. The new interface extends the capability to stop a counter while keeping it scheduled on the PMU. We replace the throttled state with the generic stopped state. This also allows us to efficiently stop/start counters over certain code paths (like IRQ handlers). It also allows scheduling a counter without it starting, allowing for a generic frozen state (useful for rotating stopped counters). The stopped state is implemented in two different ways, depending on how the architecture implemented the throttled state: 1) We disable the counter: a) the pmu has per-counter enable bits, we flip that b) we program a NOP event, preserving the counter state 2) We store the counter state and ignore all read/overflow events Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: paulus <paulus@samba.org> Cc: stephane eranian <eranian@googlemail.com> Cc: Robert Richter <robert.richter@amd.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Cyrill Gorcunov <gorcunov@gmail.com> Cc: Lin Ming <ming.m.lin@intel.com> Cc: Yanmin <yanmin_zhang@linux.intel.com> Cc: Deng-Cheng Zhu <dengcheng.zhu@gmail.com> Cc: David Miller <davem@davemloft.net> Cc: Michael Cree <mcree@orcon.net.nz> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-09-09perf: Per PMU disablePeter Zijlstra1-18/+20
Changes perf_disable() into perf_pmu_disable(). Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: paulus <paulus@samba.org> Cc: stephane eranian <eranian@googlemail.com> Cc: Robert Richter <robert.richter@amd.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Cyrill Gorcunov <gorcunov@gmail.com> Cc: Lin Ming <ming.m.lin@intel.com> Cc: Yanmin <yanmin_zhang@linux.intel.com> Cc: Deng-Cheng Zhu <dengcheng.zhu@gmail.com> Cc: David Miller <davem@davemloft.net> Cc: Michael Cree <mcree@orcon.net.nz> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-09-09perf: Reduce perf_disable() usagePeter Zijlstra1-3/+8
Since the current perf_disable() usage is only an optimization, remove it for now. This eases the removal of the __weak hw_perf_enable() interface. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: paulus <paulus@samba.org> Cc: stephane eranian <eranian@googlemail.com> Cc: Robert Richter <robert.richter@amd.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Cyrill Gorcunov <gorcunov@gmail.com> Cc: Lin Ming <ming.m.lin@intel.com> Cc: Yanmin <yanmin_zhang@linux.intel.com> Cc: Deng-Cheng Zhu <dengcheng.zhu@gmail.com> Cc: David Miller <davem@davemloft.net> Cc: Michael Cree <mcree@orcon.net.nz> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-09-09perf: Register PMU implementationsPeter Zijlstra1-11/+24
Simple registration interface for struct pmu, this provides the infrastructure for removing all the weak functions. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: paulus <paulus@samba.org> Cc: stephane eranian <eranian@googlemail.com> Cc: Robert Richter <robert.richter@amd.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Cyrill Gorcunov <gorcunov@gmail.com> Cc: Lin Ming <ming.m.lin@intel.com> Cc: Yanmin <yanmin_zhang@linux.intel.com> Cc: Deng-Cheng Zhu <dengcheng.zhu@gmail.com> Cc: David Miller <davem@davemloft.net> Cc: Michael Cree <mcree@orcon.net.nz> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-09-09perf: Deconstify struct pmuPeter Zijlstra1-2/+2
sed -ie 's/const struct pmu\>/struct pmu/g' `git grep -l "const struct pmu\>"` Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: paulus <paulus@samba.org> Cc: stephane eranian <eranian@googlemail.com> Cc: Robert Richter <robert.richter@amd.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Cyrill Gorcunov <gorcunov@gmail.com> Cc: Lin Ming <ming.m.lin@intel.com> Cc: Yanmin <yanmin_zhang@linux.intel.com> Cc: Deng-Cheng Zhu <dengcheng.zhu@gmail.com> Cc: David Miller <davem@davemloft.net> Cc: Michael Cree <mcree@orcon.net.nz> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-06-09perf: Convert perf_event to local_tPeter Zijlstra1-3/+3
Since now all modification to event->count (and ->prev_count and ->period_left) are local to a cpu, change then to local64_t so we avoid the LOCK'ed ops. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-23sh: Tidy up a couple of section mismatches.Paul Mundt1-1/+1
select_idle_routine() and register_sh_pmu() both needed their annotations fixed up to silence section mismatch warnings. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-03-10perf: Rework and fix the arch CPU-hotplug hooksPeter Zijlstra1-1/+19
Remove the hw_perf_event_*() hotplug hooks in favour of per PMU hotplug notifiers. This has the advantage of reducing the static weak interface as well as exposing all hotplug actions to the PMU. Use this to fix x86 hotplug usage where we did things in ONLINE which should have been done in UP_PREPARE or STARTING. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mundt <lethal@linux-sh.org> Cc: paulus@samba.org Cc: eranian@google.com Cc: robert.richter@amd.com Cc: fweisbec@gmail.com Cc: Arnaldo Carvalho de Melo <acme@infradead.org> LKML-Reference: <20100305154128.736225361@chello.nl> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-05sh: perf events: Fix up uninitialized variable warning.Paul Mundt1-3/+1
'config' can be unintialized, and although it's not really an error, it still manages to trigger the -Werror with certain toolchains. Initialize it early to shut up gcc. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-28sh: perf events: Kill off left over debugging cruft.Paul Mundt1-1/+1
num_events should be compared > MAX_HWEVENTS and not >=. The latter was used as a debugging test which accidentally slipped in. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-28sh: perf events: Add preliminary support for SH-4A counters.Paul Mundt1-0/+314
This adds in preliminary support for the SH-4A performance counters. Presently only the first 2 counters are supported, as these are the ones of the most interest to the perf tool and end users. Counter chaining is not presently handled, so these are simply implemented as 32-bit counters. This also establishes a perf event support framework for other hardware counters, which the existing SH-4 oprofile code will migrate over to as the SH-4A support evolves. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-16 19:36:22 +0000