summaryrefslogtreecommitdiffstats
path: root/arch/sh/kernel/cpu/sh4a/clock-sh7722.c
AgeCommit message (Collapse)AuthorFilesLines
2018-02-26media: arch: sh: migor: Use new renesas-ceu camera driverJacopo Mondi1-1/+1
Migo-R platform uses sh_mobile_ceu camera driver, which is now being replaced by a proper V4L2 camera driver named 'renesas-ceu'. Move Migo-R platform to use the v4l2 renesas-ceu camera driver interface and get rid of soc_camera defined components used to register sensor drivers and of platform specific enable/disable routines. Register clock source and GPIOs for sensor drivers, so they can use clock and gpio APIs. Also, memory for CEU video buffers is now reserved with membocks APIs, and need to be declared as dma_coherent during machine initialization to remove that architecture specific part from CEU driver. Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2014-05-11sh: Switch to new style TMU deviceLaurent Pinchart1-3/+1
The TMU (Timer Unit) driver implements a new style of platform data that handles the timer as a single device with multiple channel. Switch from the old-style platform data to the new-style platform data. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-05-11sh: Switch to new style CMT deviceLaurent Pinchart1-1/+1
The CMT (Compare Match Timer) driver implements a new style of platform data that handles the timer as a single device with multiple channel. Switch from the old-style platform data to the new-style platform data. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2012-06-28sh: Convert sh_clk_mstp32_register to sh_clk_mstp_registerNobuhiro Iwamatsu1-1/+1
sh_clk_mstp32_register is deprecated. This convert to sh_clk_mstp_register. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-03-12sh: sh4a sh_clk_ops renameMagnus Damm1-2/+2
Convert sh4a SoCs to use sh_clk_ops. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-11-18sh: sh7722: use runtime PM implementation, common with arm/mach-shmobileGuennadi Liakhovetski1-37/+40
Switch sh7722 to a runtime PM implementation, common with ARM-based sh-mobile platforms. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-07-11sh: move CLKDEV_xxx_ID macro to sh_clk.hKuninori Morimoto1-4/+0
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-07-11sh: clock-sh7722: add CLKDEV_ICK_ID for cleanupKuninori Morimoto1-32/+11
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-07-11sh: clock-sh7722: modify I2C clock settingsKuninori Morimoto1-1/+2
I2C doesn't work without this patch on SH7722 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-11-26ARM: 6483/1: arm & sh: factorised duplicated clkdev.cJean-Christop PLAGNIOL-VILLARD1-1/+1
factorise some generic infrastructure to assist looking up struct clks for the ARM & SH architecture. as the code is identical at 99% put the arch specific code for allocation as example in asm/clkdev.h Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-05-13sh: switch sh7722 to clkdevMagnus Damm1-8/+6
This patch converts the remaining sh7722 clocks to use clkdev for lookup. The now unused name and id from struct clk are also removed. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-05-13sh: get rid of div4 clock nameMagnus Damm1-11/+11
Remove the name parameter from SH_CLK_DIV4() and adjust the processor specific code. The lookup happens using clkdev so the name is unused. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-05-13sh: sh7722 div4 clkdev lookupMagnus Damm1-0/+11
Add sh7722 DIV4 clocks to the clkdev lookup list. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-05-11sh: get rid of div6 clock namesMagnus Damm1-1/+1
Get rid of div6 clock names on sh7343/sh7366/sh7722/sh7723/sh7724 Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-05-11sh: tie in div6 clocks using clkdevMagnus Damm1-3/+8
Use clkdev for div6 lookup on SH-Mobile processors: sh7343/sh7366/sh7722/sh7723/sh7724 Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-05-11sh: get rid of hwblk clock namesMagnus Damm1-30/+25
Remove the clock name from sh7722/sh7723/sh7724 hwblk clocks. Lookup is handled by clkdev. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-05-11sh: tie in hwblk clocks using clkdevMagnus Damm1-1/+24
Use clkdev for lookup of hwblk clocks on sh7722/sh7723/sh7724. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-05-11sh: scif and tmu clkdev changesMagnus Damm1-3/+40
Modify sh7722/sh7723/sh7724 to use clkdev for TMU and SCIF clock lookups. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-05-11sh: hwblk index reworkMagnus Damm1-2/+2
Rework the sh7722/sh7723/sh7724 hwblk code to use the hwblk id as index in the mstp clock array. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-03-29sh: sh7722 clock string death.Paul Mundt1-2/+2
Kills off clock string usage, using the new function clock definition instead. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-03-10serial: sh-sci: clkdev updates for MSTP gating.Paul Mundt1-3/+3
This fixes up some of the I/D/F clock ambiguity in the sh-sci driver. The interface clock in most cases just wraps back to the peripheral clock, while the function clock wraps in to the MSTP bits. As the logic was somewhat inverted, this cleans that up, and also enables all CPUs with SCI MSTP bits to match function clocks through clkdev lookup. As a result, this gets rid of the clk string abuse on the sh side, and the clock string will be killed off once the ARM code has had a chance to sync up. This also enables MSTP gating on CPUs like 7786 which had never wired it up before. Impacted CPUs are primarily all SH-Mobiles, SH7785, and SH7786. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-02-22sh: introduce struct clk_div4_tableMagnus Damm1-1/+5
This patch introduces struct clk_div4_table. The structure will be used to keep div4 specific data, and is with this patch replacing the struct clk_div_mult_table pointer arg used by the sh_clk_div4_register() functions. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-01-19sh: support SIU sourcing from external clock on sh7722Guennadi Liakhovetski1-4/+21
Implement .set_rate() for all SH "div4 clocks," .enable(), .disable(), and .set_parent() for those, that support them. This allows, among other uses, reparenting of SIU clocks to the external source, and enabling and disabling of the IrDA clock on sh7722. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-23sh: drop static UIO clocks for sh7722, sh7723 and sh7724Magnus Damm1-3/+3
The Runtime PM patch for UIO driver implements coarse grained dynamic power management for UIO devices. With that patch in place we can get rid of the static clock configuration. Which in turn makes it possible for cpuidle to enter deeper sleep. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-04sh: clean up MSTPCRn register definitionsMagnus Damm1-3/+0
This patch removes the unused MSTPCRn register definitions from the SuperH Mobile code for sh7722, sh7723 and sh7724. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-07-05sh: hwblk for sh7722Magnus Damm1-28/+32
This patch contains the sh7722 specific hwblk implementation. Hwblk ids are added to the processor specific header file, module stop bits and areas are kept track of as hwblks, clocks are converted to make use of the shared hwblk code. Code to determine allowed sleep modes is also added. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-06-11sh: sh7722 clock framework rewriteMagnus Damm1-659/+137
This patch rewrites the sh7722 clock framework code. The new code makes use of the recently merged div4, div6 and mstp32 helper code. Both extal and dll are supported as input clocks to the pll. While at it, now when all SuperH Mobile processors are converted, fix CONFIG_SH_CLK_CPG_LEGACY to depend on CONFIG_ARCH_SHMOBILE. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-06-11sh: sh7366 clock framework rewriteMagnus Damm1-41/+1
This patch rewrites the sh7366 clock framework code. The new code makes use of the recently merged div4, div6 and mstp32 helper code. Both extal and dll are supported as input clocks to the pll. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-06-11sh: sh7343 clock framework rewriteMagnus Damm1-32/+1
This patch rewrites the sh7343 clock framework code. The new code makes use of the recently merged div4, div6 and mstp32 helper code. Both extal and dll are supported as input clocks to the pll. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-06-11sh: sh7724 clock framework rewrite V3Magnus Damm1-80/+5
This patch contains V3 of the sh7724 clock framework rewrite. The new code makes use of the recently merged div4, div6 and mstp32 helper code. Both extal and fll are supported as input clocks to the pll. The div6 clocks are fed through a divide-by-3 block. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-06-11sh: sh7723 clock framework rewrite V2Magnus Damm1-56/+1
This patch contains V2 of the sh7723 clock framework rewrite. The new code makes use of the recently merged div4, div6 and mstp32 helper code. Both extal and dll are supported as input clocks to the pll. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-22sh: clkfwk: beyond ARRAY_SIZE of onchip_ops for sh7722.Roel Kluin1-1/+1
Do not go beyond ARRAY_SIZE of onchip_ops Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-22sh: clkfwk branch compile fix for clock-sh7722Magnus Damm1-1/+1
Fix clkfwk branch compile error in clock-sh7722.c. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-13sh: clkfwk: Rework legacy CPG clock handling.Paul Mundt1-0/+2
This moves out the old legacy CPG clocks to their own file, and converts over the existing users. With these clocks going away and each CPU dealing with them on their own, CPUs can gradually move over to the new interface. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-12sh: clkfwk: Kill off clk_recalc_rate().Paul Mundt1-1/+1
The only user for this is the SH-Mobile r_clk, which is now added as a root clock and can be kicked via propagate_rate() as usual. Given that, there is no longer any need for the special clk_recalc_rate(), so we kill it off. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-12sh: clkfwk: Fix up the clk_enable() error path.Paul Mundt1-5/+6
There are a couple of instances where a clk_enable() can fail, which the SH-Mobile code presently handles, but doesn't get reported all the way back up. This fixes up the return type so the errors make it all the way down to the drivers. Additionally, we now also error out properly if the parent enable fails. Prep work for aggressively turning off unused clocks on boot. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-12sh: clkfwk: Convert SH-Mobile CPUs to use CLK_ENABLE_ON_INIT.Paul Mundt1-182/+183
Kill off all of the clk_always_enabled leftovers and use the new flag directly. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-12sh: clkfwk: refactor rate propagation.Paul Mundt1-7/+1
This resyncs the rate propagation strategy with the scheme used by the OMAP clock framework. Child clocks are tracked on a list under each parent and propagation happens there specifically rather than constantly iterating over the global clock list. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-12sh: clkfwk: Add a followparent_recalc() helper.Paul Mundt1-6/+1
This adds a followparent_recalc() helper for clocks that just follow the parent's rate. Switch over the few CPUs that use this scheme for some of their clocks. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-12sh: clkfwk: Make recalc return an unsigned long.Paul Mundt1-18/+13
This is prep work for cleaning up some of the rate propagation bits. Trivial conversion. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-04-16sh: Add support for SH7724 (SH-Mobile R2R) CPU subtype.Kuninori Morimoto1-12/+100
This implements initial support for the SH-Mobile R2R CPU. Based on Rev 0.11 of the initial SH7724 hardware manual. Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: propagate r_clkMagnus Damm1-0/+2
Make sure the 32 KHz r_clk rate gets propagated correctly. Without this fix the clocks for RTC, CMT, KEYSC and RWDT are stuck at 0 Hz. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: remove old sh_mobile mstpc clocksMagnus Damm1-52/+0
Remove the old sh_mobile mstpcr clocks. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: sh_mobile mstpcr clocks for sh7366Magnus Damm1-0/+40
Add sh7366 mstpcr bits and information about their parent clocks. The datasheet is pretty clear about the clocks on this device. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: sh_mobile mstpcr clocks for sh7343Magnus Damm1-0/+24
Add sh7343 mstpcr bits and information about their parent clocks. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: sh_mobile mstpcr clocks for sh7723Magnus Damm1-0/+50
Add sh7723 mstpcr bits and information about their parent clocks. The datasheet is pretty clear about the clocks on this device. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: sh_mobile mstpcr clocks for sh7722Magnus Damm1-0/+25
Add sh7722 mstpcr bits and information about their parent clocks. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: new sh_mobile mstpcr clocks base codeMagnus Damm1-4/+41
Add base code to handle new mstpcr clocks. Make sure clock rates propagate. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: use arch_flags for sh_mobile mstpcr clock bitsMagnus Damm1-42/+30
Use arch_flags to keep track of register and flag number. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: sh_mobile clock divider index fixMagnus Damm1-10/+10
Use divider index value instead of divider value. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-08-01 16:06:37 +0000