summaryrefslogtreecommitdiffstats
path: root/arch/sh/include
AgeCommit message (Collapse)AuthorFilesLines
2009-10-12Merge branch 'sh/dwarf-unwinder' of git://github.com/mfleming/linux-2.6 into ↵Paul Mundt1-0/+16
sh/dwarf-unwinder
2009-10-11sh: tracing: Use the DWARF unwinder for CALLER_ADDRxMatt Fleming1-0/+47
The major reason for implementing the DWARF unwinder in the first place was so that we could stop using __builtin_return_address(n), which doesn't work on SH for n > 0. Signed-off-by: Matt Fleming <matt@console-pimps.org>
2009-10-11sh: Fix memory leak in dwarf_unwind_stack()Matt Fleming1-0/+1
If we broke out of the while (1) loop because the return address of "frame" was zero, then "frame" needs to be free'd before we return. Signed-off-by: Matt Fleming <matt@console-pimps.org>
2009-10-11sh: Teach the DWARF unwinder about modulesMatt Fleming1-0/+15
Pass a module's .eh_frame section to the DWARF unwinder at module load time so that the section's FDEs and CIEs can be registered with the DWARF unwinder. This allows us to unwind the stack through module code when generating backtraces. Signed-off-by: Matt Fleming <matt@console-pimps.org>
2009-10-10sh: Shut up CONFIG_32BIT=n compiler warnings.Paul Mundt1-1/+1
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-10sh: Fold fixed-PMB support into dynamic PMB supportMatt Fleming1-0/+2
The initialisation process differs for CONFIG_PMB and for CONFIG_PMB_FIXED. For CONFIG_PMB_FIXED we need to register the PMB entries that were allocated by the bootloader. Signed-off-by: Matt Fleming <matt@console-pimps.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-10sh: Remap physical memory into P1 and P2 in pmb_init()Matt Fleming1-2/+2
Eventually we'll have complete control over what physical memory gets mapped where and we can probably do other interesting things. For now though, when the MMU is in 32-bit mode, we map physical memory into the P1 and P2 virtual address ranges with the same semantics as they have in 29-bit mode. Signed-off-by: Matt Fleming <matt@console-pimps.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-10sh: Make most PMB functions staticMatt Fleming1-7/+1
There's no need to export the internal PMB functions for allocating, freeing and modifying PMB entries, etc. This way we can restrict the interface for PMB. Also remove the static from pmb_init() so that we have more freedom in setting up the initial PMB entries and turning on MMU 32bit mode. Signed-off-by: Matt Fleming <matt@console-pimps.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-10sh: Prepare for dynamic PMB supportMatt Fleming5-7/+32
To allow the MMU to be switched between 29bit and 32bit mode at runtime some constants need to swapped for functions that return a runtime value. Signed-off-by: Matt Fleming <matt@console-pimps.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-10sh: Obliterate the P1 area macrosMatt Fleming1-3/+0
Replace the use of PHYSADDR() with __pa(). PHYSADDR() is based on the idea that all addresses in P1SEG are untranslated, so we can access an address's physical page as an offset from P1SEG. This doesn't work for CONFIG_PMB/CONFIG_PMB_FIXED because pages in P1SEG and P2SEG are used for PMB mappings and so can be translated to any physical address. Likewise, replace a P1SEGADDR() use with virt_to_phys(). Signed-off-by: Matt Fleming <matt@console-pimps.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-10Merge branch 'sh/cachetlb'Paul Mundt1-3/+3
2009-09-24Merge branch 'for-linus' of git://neil.brown.name/mdLinus Torvalds1-0/+13
* 'for-linus' of git://neil.brown.name/md: (97 commits) md: raid-1/10: fix RW bits manipulation md: remove unnecessary memset from multipath. md: report device as congested when suspended md: Improve name of threads created by md_register_thread md: remove sparse warnings about lock context. md: remove sparse waring "symbol xxx shadows an earlier one" async_tx/raid6: add missing dma_unmap calls to the async fail case ioat3: fix uninitialized var warnings drivers/dma/ioat/dma_v2.c: fix warnings raid6test: fix stack overflow ioat2: clarify ring size limits md/raid6: cleanup ops_run_compute6_2 md/raid6: eliminate BUG_ON with side effect dca: module load should not be an error message ioat: driver version 4.0 dca: registering requesters in multiple dca domains async_tx: remove HIGHMEM64G restriction dmaengine: sh: Add Support SuperH DMA Engine driver dmaengine: Move all map_sg/unmap_sg for slave channel to its client fsldma: Add DMA_SLAVE support ...
2009-09-24cpumask: remove arch_send_call_function_ipiRusty Russell1-1/+0
Now everyone is converted to arch_send_call_function_ipi_mask, remove the shim and the #defines. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2009-09-24cpumask: remove obsolete node_to_cpumask now everyone uses cpumask_of_nodeRusty Russell1-1/+0
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2009-09-23Merge branch 'next' of ↵NeilBrown1-0/+13
git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx into for-linus
2009-09-21perf: Do the big rename: Performance Counters -> Performance EventsIngo Molnar4-11/+11
Bye-bye Performance Counters, welcome Performance Events! In the past few months the perfcounters subsystem has grown out its initial role of counting hardware events, and has become (and is becoming) a much broader generic event enumeration, reporting, logging, monitoring, analysis facility. Naming its core object 'perf_counter' and naming the subsystem 'perfcounters' has become more and more of a misnomer. With pending code like hw-breakpoints support the 'counter' name is less and less appropriate. All in one, we've decided to rename the subsystem to 'performance events' and to propagate this rename through all fields, variables and API names. (in an ABI compatible fashion) The word 'event' is also a bit shorter than 'counter' - which makes it slightly more convenient to write/handle as well. Thanks goes to Stephane Eranian who first observed this misnomer and suggested a rename. User-space tooling and ABI compatibility is not affected - this patch should be function-invariant. (Also, defconfigs were not touched to keep the size down.) This patch has been generated via the following script: FILES=$(find * -type f | grep -vE 'oprofile|[^K]config') sed -i \ -e 's/PERF_EVENT_/PERF_RECORD_/g' \ -e 's/PERF_COUNTER/PERF_EVENT/g' \ -e 's/perf_counter/perf_event/g' \ -e 's/nb_counters/nb_events/g' \ -e 's/swcounter/swevent/g' \ -e 's/tpcounter_event/tp_event/g' \ $FILES for N in $(find . -name perf_counter.[ch]); do M=$(echo $N | sed 's/perf_counter/perf_event/g') mv $N $M done FILES=$(find . -name perf_event.*) sed -i \ -e 's/COUNTER_MASK/REG_MASK/g' \ -e 's/COUNTER/EVENT/g' \ -e 's/\<event\>/event_id/g' \ -e 's/counter/event/g' \ -e 's/Counter/Event/g' \ $FILES ... to keep it as correct as possible. This script can also be used by anyone who has pending perfcounters patches - it converts a Linux kernel tree over to the new naming. We tried to time this change to the point in time where the amount of pending patches is the smallest: the end of the merge window. Namespace clashes were fixed up in a preparatory patch - and some stylistic fallout will be fixed up in a subsequent patch. ( NOTE: 'counters' are still the proper terminology when we deal with hardware registers - and these sed scripts are a bit over-eager in renaming them. I've undone some of that, but in case there's something left where 'counter' would be better than 'event' we can undo that on an individual basis instead of touching an otherwise nicely automated patch. ) Suggested-by: Stephane Eranian <eranian@google.com> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Paul Mackerras <paulus@samba.org> Reviewed-by: Arjan van de Ven <arjan@linux.intel.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: David Howells <dhowells@redhat.com> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: <linux-arch@vger.kernel.org> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-18Merge git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6Linus Torvalds59-423/+1629
* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: (262 commits) sh: mach-ecovec24: Add user debug switch support sh: Kill off unused se_skipped in alignment trap notification code. sh: Wire up HAVE_SYSCALL_TRACEPOINTS. video: sh_mobile_lcdcfb: use both register sets for display panning video: sh_mobile_lcdcfb: implement display panning sh: Fix up sh7705 flush_dcache_page() build. sh: kfr2r09: document the PLL/FLL <-> RF relationship. sh: mach-ecovec24: need asm/clock.h. sh: mach-ecovec24: deassert usb irq on boot. sh: Add KEYSC support for EcoVec24 sh: add kycr2_delay for sh_keysc sh: cpufreq: Include CPU id in info messages. sh: multi-evt support for SH-X3 proto CPU. sh: clkfwk: remove bogus set_bus_parent() from SH7709. sh: Fix the indication point of the liquid crystal of AP-325RXA(AP3300) sh: Add EcoVec24 romImage defconfig sh: USB disable process is needed if romImage boot for EcoVec24 sh: EcoVec24: add HIZA setting for LED sh: EcoVec24: write MAC address in boot sh: Add romImage support for EcoVec24 ...
2009-09-17Merge branch 'sched-core-for-linus' of ↵Linus Torvalds1-5/+5
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (37 commits) sched: Fix SD_POWERSAVING_BALANCE|SD_PREFER_LOCAL vs SD_WAKE_AFFINE sched: Stop buddies from hogging the system sched: Add new wakeup preemption mode: WAKEUP_RUNNING sched: Fix TASK_WAKING & loadaverage breakage sched: Disable wakeup balancing sched: Rename flags to wake_flags sched: Clean up the load_idx selection in select_task_rq_fair sched: Optimize cgroup vs wakeup a bit sched: x86: Name old_perf in a unique way sched: Implement a gentler fair-sleepers feature sched: Add SD_PREFER_LOCAL sched: Add a few SYNC hint knobs to play with sched: Fix sync wakeups again sched: Add WF_FORK sched: Rename sync arguments sched: Rename select_task_rq() argument sched: Feature to disable APERF/MPERF cpu_power x86: sched: Provide arch implementations using aperf/mperf x86: Add generic aperf/mperf code x86: Move APERF/MPERF into a X86_FEATURE ... Fix up trivial conflict in arch/x86/include/asm/processor.h due to nearby addition of amd_get_nb_id() declaration from the EDAC merge.
2009-09-16Merge branch 'linux-next' of ↵Linus Torvalds1-1/+0
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6 * 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: (75 commits) PCI hotplug: clean up acpi_run_hpp() PCI hotplug: acpiphp: use generic pci_configure_slot() PCI hotplug: shpchp: use generic pci_configure_slot() PCI hotplug: pciehp: use generic pci_configure_slot() PCI hotplug: add pci_configure_slot() PCI hotplug: clean up acpi_get_hp_params_from_firmware() interface PCI hotplug: acpiphp: don't cache hotplug_params in acpiphp_bridge PCI hotplug: acpiphp: remove superfluous _HPP/_HPX evaluation PCI: Clear saved_state after the state has been restored PCI PM: Return error codes from pci_pm_resume() PCI: use dev_printk in quirk messages PCI / PCIe portdrv: Fix pcie_portdrv_slot_reset() PCI Hotplug: convert acpi_pci_detect_ejectable() to take an acpi_handle PCI Hotplug: acpiphp: find bridges the easy way PCI: pcie portdrv: remove unused variable PCI / ACPI PM: Propagate wake-up enable for devices w/o ACPI support ACPI PM: Replace wakeup.prepared with reference counter PCI PM: Introduce device flag wakeup_prepared PCI / ACPI PM: Rework some debug messages PCI PM: Simplify PCI wake-up code ... Fixed up conflict in arch/powerpc/kernel/pci_64.c due to OF device tree scanning having been moved and merged for the 32- and 64-bit cases. The 'needs_freset' initialization added in 6e19314cc ("PCI/powerpc: support PCIe fundamental reset") is now in arch/powerpc/kernel/pci_of_scan.c.
2009-09-16sched: Disable wakeup balancingPeter Zijlstra1-1/+0
Sysbench thinks SD_BALANCE_WAKE is too agressive and kbuild doesn't really mind too much, SD_BALANCE_NEWIDLE picks up most of the slack. On a dual socket, quad core, dual thread nehalem system: sysbench (--num_threads=16): SD_BALANCE_WAKE-: 13982 tx/s SD_BALANCE_WAKE+: 15688 tx/s kbuild (-j16): SD_BALANCE_WAKE-: 47.648295846 seconds time elapsed ( +- 0.312% ) SD_BALANCE_WAKE+: 47.608607360 seconds time elapsed ( +- 0.026% ) (same within noise) Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-16sh: Wire up HAVE_SYSCALL_TRACEPOINTS.Paul Mundt1-4/+4
This is necessary to get ftrace syscall tracing working again.. a fairly trivial and mechanical change. The one benefit is that this can also be enabled on sh64, despite not having its own ftrace port. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-09-16Merge branch 'master' of ↵Paul Mundt1-0/+3
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6 Conflicts: arch/sh/kernel/vmlinux.lds.S
2009-09-15sched: Reduce forkexec_idxPeter Zijlstra1-1/+1
If we're looking to place a new task, we might as well find the idlest position _now_, not 1 tick ago. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-15sched: Improve latencies and throughputMike Galbraith1-1/+2
Make the idle balancer more agressive, to improve a x264 encoding workload provided by Jason Garrett-Glaser: NEXT_BUDDY NO_LB_BIAS encoded 600 frames, 252.82 fps, 22096.60 kb/s encoded 600 frames, 250.69 fps, 22096.60 kb/s encoded 600 frames, 245.76 fps, 22096.60 kb/s NO_NEXT_BUDDY LB_BIAS encoded 600 frames, 344.44 fps, 22096.60 kb/s encoded 600 frames, 346.66 fps, 22096.60 kb/s encoded 600 frames, 352.59 fps, 22096.60 kb/s NO_NEXT_BUDDY NO_LB_BIAS encoded 600 frames, 425.75 fps, 22096.60 kb/s encoded 600 frames, 425.45 fps, 22096.60 kb/s encoded 600 frames, 422.49 fps, 22096.60 kb/s Peter pointed out that this is better done via newidle_idx, not via LB_BIAS, newidle balancing should look for where there is load _now_, not where there was load 2 ticks ago. Worst-case latencies are improved as well as no buddies means less vruntime spread. (as per prior lkml discussions) This change improves kbuild-peak parallelism as well. Reported-by: Jason Garrett-Glaser <darkshikari@gmail.com> Signed-off-by: Mike Galbraith <efault@gmx.de> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <1253011667.9128.16.camel@marge.simson.net> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-15sched: Tweak wake_idxPeter Zijlstra1-1/+1
When merging select_task_rq_fair() and sched_balance_self() we lost the use of wake_idx, restore that and set them to 0 to make wake balancing more aggressive. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-15sched: Merge select_task_rq_fair() and sched_balance_self()Peter Zijlstra1-2/+2
The problem with wake_idle() is that is doesn't respect things like cpu_power, which means it doesn't deal well with SMT nor the recent RT interaction. To cure this, it needs to do what sched_balance_self() does, which leads to the possibility of merging select_task_rq_fair() and sched_balance_self(). Modify sched_balance_self() to: - update_shares() when walking up the domain tree, (it only called it for the top domain, but it should have done this anyway), which allows us to remove this ugly bit from try_to_wake_up(). - do wake_affine() on the smallest domain that contains both this (the waking) and the prev (the wakee) cpu for WAKE invocations. Then use the top-down balance steps it had to replace wake_idle(). This leads to the dissapearance of SD_WAKE_BALANCE and SD_WAKE_IDLE_FAR, with SD_WAKE_IDLE replaced with SD_BALANCE_WAKE. SD_WAKE_AFFINE needs SD_BALANCE_WAKE to be effective. Touch all topology bits to replace the old with new SD flags -- platforms might need re-tuning, enabling SD_BALANCE_WAKE conditionally on a NUMA distance seems like a good additional feature, magny-core and small nehalem systems would want this enabled, systems with slow interconnects would not. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-15sh: kfr2r09: document the PLL/FLL <-> RF relationship.Kuninori Morimoto1-0/+2
Early clock initialization sets up PLL/FLL values for optimal RF behaviour. As this relationship is presently undocumented, we document this in the script so the rationale is apparent. Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-09-15sh: add kycr2_delay for sh_keyscKuninori Morimoto1-0/+1
After KYCR2 is set, udelay might become necessary if there are only a small number of keys attached. This patch introduces an optional delay through the platform data to address this problem. Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-09-11sh: USB disable process is needed if romImage boot for EcoVec24Kuninori Morimoto1-0/+3
when you use romImage on EcoVec24, 1st Linux will enable USB device. But no-one disable it. So re-started Linux will get interrupt before USB driver is attached. This patch disable USB device at first Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-09-11sh: Add romImage support for EcoVec24Kuninori Morimoto2-0/+99
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-09-11sh: add romimage-macros.hKuninori Morimoto2-69/+74
romimage macros which are used in kfr2r09 is very useful for other board. This patch divides kfr2r09's romimage.h into romimage-macros and partner-jet-setup. Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-09-09PCI: remove pcibios_scan_all_fns()Alex Chiang1-1/+0
This was #define'd as 0 on all platforms, so let's get rid of it. This change makes pci_scan_slot() slightly easier to read. Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Tony Luck <tony.luck@intel.com> Cc: David Howells <dhowells@redhat.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jeff Dike <jdike@addtoit.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Reviewed-by: Matthew Wilcox <willy@linux.intel.com> Acked-by: Russell King <linux@arm.linux.org.uk> Acked-by: Ralf Baechle <ralf@linux-mips.org> Acked-by: Kyle McMartin <kyle@mcmartin.ca> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Paul Mundt <lethal@linux-sh.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Alex Chiang <achiang@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-09-09sh: Factor in cpu id for selection of cache colour fixmap.Paul Mundt1-3/+3
In the SMP VIPT case the page copy/clear ops still perform colouring, care needs to be taken that CPUs don't end up stepping on each other, so we give them a bit of room to work with. At the same time, we reduce the worst-case colouring given that these pages are always consumed. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-09-08dmaengine: sh: Add Support SuperH DMA Engine driverNobuhiro Iwamatsu1-0/+13
This supported all DMA channels, and it was tested in SH7722, SH7780, SH7785 and SH7763. This can not use with SH DMA API. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> Reviewed-by: Matt Fleming <matt@console-pimps.org> Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com> Acked-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-09-03sh: Fix up and optimize the kmap_coherent() interface.Paul Mundt3-2/+13
This fixes up the kmap_coherent/kunmap_coherent() interface for recent changes both in the page fault path and the shared cache flushers, as well as adding in some optimizations. One of the key things to note here is that the TLB flush itself is deferred until the unmap, and the call in to update_mmu_cache() itself goes away, relying on the regular page fault path to handle the lazy dcache writeback if necessary. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-09-01sh: Kill off kgdb's magical NMI debouncing.Paul Mundt1-3/+0
The kgdb stub has traditionally tied in to the NMI slot, and manually handled debounce. Now that we have a generic way to do this instead, all of the stub-specific debounce silliness can be killed off. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-09-01sh: nmi_debug support.Paul Mundt2-1/+2
This implements support for NMI debugging that was shamelessly copied from the avr32 port. A bit of special magic is needed in the interrupt exception path given that the NMI exception handler is stubbed in to the regular exception handling table despite being reported in INTEVT. So we mangle the lookup and kick off an EXPEVT-style exception dispatch from the INTEVT path for exceptions that do_IRQ() has no chance of handling. As a result, we also drop the evt2irq() conversion from the do_IRQ() path and just do it in assembly. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-09-01Merge branch 'master' into sh/smpPaul Mundt22-50/+411
Conflicts: arch/sh/mm/cache-sh4.c
2009-08-31sh: unwinder: Fix up uninitialized variable warnings on sh2a build.Paul Mundt1-1/+1
A couple of these popped up on the sh2a build, causing build failures. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-29sh: Only shout about fixing up unexpected unaligned accessesMatt Fleming1-1/+1
Some unaligned accesses are completely expected. For example, the trapped_io code uses the unaligned access fixup code path so there's no need to warn about having to fixup the unaligned access. Signed-off-by: Matt Fleming <matt@console-pimps.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-29net: sh_eth: add value of ether_link pin in platform_dataYoshihiro Shimoda1-0/+3
The method of ETHER_LINK pin is board dependence. This patch adding paramters are: - no_ether_link : If set to 1, do not use ETHER_LINK - ether_link_active_low : If set to 1, ETHER_LINK is active low. Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-28sh: sh7785lcr: fix prototype board on 32bit MMU mode.Yoshihiro Shimoda1-0/+2
Fix up PCA9564 resources on 32bit MMU mode using prototype board. Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Tested-by: Raul Porcel <armin76@gentoo.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-28sh: Tidy up watchdog build for SH-2.Paul Mundt1-9/+10
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-25sh: Fix an off-by-1 in FTRACE_SYSCALL_MAX.Paul Mundt1-1/+1
This is supposed to be the equivalent of __NR_syscalls, not __NR_syscalls -1. The x86 code this was based on had simply fallen out of sync at the time this was implemented. Fix it up now. As a result, tracing of __NR_perf_counter_open works as advertised. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-24Merge branch 'sh/st-integration'Paul Mundt6-5/+38
2009-08-24sh: Move the FTRACE_SYSCALL_MAX definition in to asm/ftrace.h.Paul Mundt1-0/+1
Needed by ftrace changes in -tip. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-24sh: fix sys_cacheflush error checkingGiuseppe Cavallaro1-0/+7
sys_cacheflush should return with EINVAL if the cache parameter is not one of ICACHE, DCACHE or BCACHE. So, we need to include 0 in the first check. It also adds the three definitions above as wrapper of the existent macros. PS: ltp cacheflush01 test now passes. Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: Stuart Menefy <stuart.menefy@st.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-24sh: Add sys_cacheflush() call for SH CPUs.Stuart Menefy4-3/+15
Adds a system call to allow user code to flush code from the cache. You can use instructions for the data side, but the iside can only be done by a flush ROM which really only works with a direct mapped cache. The later SH4's have 2 way Iside, so this call allows a portable way to flush the cache. Signed-off-by: Stuart Menefy <stuart.menefy@st.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-24sh: Read from CCN_PVR instead of ROM for delay.Stuart Menefy1-1/+5
Reading from the ROM is not a good idea as it could disturb some flash operation that it is in progress. Signed-off-by: Stuart Menefy <stuart.menefy@st.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-24sh: Remove implicit sign extension from assembler immediatesStuart Menefy1-1/+1
The SH instruction set has several instructions which accept an 8 bit immediate operand. For logical instructions this operand is zero extended, for arithmetic instructions the operand is sign extended. After adding an option to the assembler to check this, it was found that several pieces of assembly code were assuming this behaviour, and in one case getting it wrong. So this patch explicitly sign extends any immediate operands, which makes it obvious what is happening, and fixes the one case which got it wrong. Signed-off-by: Stuart Menefy <stuart.menefy@st.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
generated by cgit v1.2.3 (git 2.39.1) at 2025-04-28 04:15:23 +0000