summaryrefslogtreecommitdiffstats
path: root/arch/sh/drivers
AgeCommit message (Collapse)AuthorFilesLines
2022-02-17PCI: Add defines for normal and subtractive PCI bridgesPali Rohár1-1/+1
Add these PCI class codes to pci_ids.h: PCI_CLASS_BRIDGE_PCI_NORMAL PCI_CLASS_BRIDGE_PCI_SUBTRACTIVE Use these defines in all kernel code for describing PCI class codes for normal and subtractive PCI bridges. [bhelgaas: similar change in pci-mvebu.c] Link: https://lore.kernel.org/r/20220214114109.26809-1-pali@kernel.org Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2021-01-06sh: dma: fix kconfig dependency for G2_DMANecip Fazil Yildiran1-2/+1
When G2_DMA is enabled and SH_DMA is disabled, it results in the following Kbuild warning: WARNING: unmet direct dependencies detected for SH_DMA_API Depends on [n]: SH_DMA [=n] Selected by [y]: - G2_DMA [=y] && SH_DREAMCAST [=y] The reason is that G2_DMA selects SH_DMA_API without depending on or selecting SH_DMA while SH_DMA_API depends on SH_DMA. When G2_DMA was first introduced with commit 40f49e7ed77f ("sh: dma: Make G2 DMA configurable."), this wasn't an issue since SH_DMA_API didn't have such dependency, and this way was the only way to enable it since SH_DMA_API was non-visible. However, later SH_DMA_API was made visible and dependent on SH_DMA with commit d8902adcc1a9 ("dmaengine: sh: Add Support SuperH DMA Engine driver"). Let G2_DMA depend on SH_DMA_API instead to avoid Kbuild issues. Fixes: d8902adcc1a9 ("dmaengine: sh: Add Support SuperH DMA Engine driver") Signed-off-by: Necip Fazil Yildiran <fazilyildiran@gmail.com> Signed-off-by: Rich Felker <dalias@libc.org>
2020-11-18dma-mapping: remove the dma_direct_set_offset exportChristoph Hellwig1-1/+1
Drop the dma_direct_set_offset export and move the declaration to dma-map-ops.h now that the Allwinner drivers have stopped calling it. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2020-10-06dma-mapping: move dma-debug.h to kernel/dma/Christoph Hellwig1-1/+0
Most of dma-debug.h is not required by anything outside of kernel/dma. Move the four declarations needed by dma-mappin.h or dma-ops providers into dma-mapping.h and dma-map-ops.h, and move the remainder of the file to kernel/dma/debug.h. Signed-off-by: Christoph Hellwig <hch@lst.de>
2020-10-06dma-mapping: split <linux/dma-mapping.h>Christoph Hellwig1-1/+1
Split out all the bits that are purely for dma_map_ops implementations and related code into a new <linux/dma-map-ops.h> header so that they don't get pulled into all the drivers. That also means the architecture specific <asm/dma-mapping.h> is not pulled in by <linux/dma-mapping.h> any more, which leads to a missing includes that were pulled in by the x86 or arm versions in a few not overly portable drivers. Signed-off-by: Christoph Hellwig <hch@lst.de>
2020-09-17dma-mapping: introduce DMA range map, supplanting dma_pfn_offsetJim Quinlan1-4/+5
The new field 'dma_range_map' in struct device is used to facilitate the use of single or multiple offsets between mapping regions of cpu addrs and dma addrs. It subsumes the role of "dev->dma_pfn_offset" which was only capable of holding a single uniform offset and had no region bounds checking. The function of_dma_get_range() has been modified so that it takes a single argument -- the device node -- and returns a map, NULL, or an error code. The map is an array that holds the information regarding the DMA regions. Each range entry contains the address offset, the cpu_start address, the dma_start address, and the size of the region. of_dma_configure() is the typical manner to set range offsets but there are a number of ad hoc assignments to "dev->dma_pfn_offset" in the kernel driver code. These cases now invoke the function dma_direct_set_offset(dev, cpu_addr, dma_addr, size). Signed-off-by: Jim Quinlan <james.quinlan@broadcom.com> [hch: various interface cleanups] Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> Tested-by: Mathieu Poirier <mathieu.poirier@linaro.org> Tested-by: Nathan Chancellor <natechancellor@gmail.com>
2020-08-23treewide: Use fallthrough pseudo-keywordGustavo A. R. Silva1-1/+1
Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2020-08-14sh: pci: Modernize printing of kernel messagesGeert Uytterhoeven3-21/+19
- Convert from printk() to pr_*(), - Add missing continuations, - Join broken messages. Note that printk(KERN_DEBUG ...) is retained, to preserve behavior (pr_debug() is a dummy if DEBUG is not defined). Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Rich Felker <dalias@libc.org>
2020-08-14sh: Remove SH5-based Cayman platformGeert Uytterhoeven2-79/+0
Since the removal of core support for SH5, Cayman support can no longer be selected. Fixes: 37744feebc086908 ("sh: remove sh5 support") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Rich Felker <dalias@libc.org>
2020-06-01sh: remove sh5 supportArnd Bergmann4-391/+0
sh5 never became a product and has probably never really worked. Remove it by recursively deleting all associated Kconfig options and all corresponding files. Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Rich Felker <dalias@libc.org>
2020-03-29sh: Replace setup_irq() by request_irq()afzal mohammed1-6/+3
request_irq() is preferred over setup_irq(). Invocations of setup_irq() occur after memory allocators are ready. setup_irq() was required in older kernels as the memory allocator was not available during early boot. Hence replace setup_irq() by request_irq(). Signed-off-by: afzal mohammed <afzal.mohd.ma@gmail.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/b060312689820559121ee0a6456bbc1202fb7ee5.1585320721.git.afzal.mohd.ma@gmail.com
2020-01-06remove ioremap_nocache and devm_ioremap_nocacheChristoph Hellwig2-3/+3
ioremap has provided non-cached semantics by default since the Linux 2.6 days, so remove the additional ioremap_nocache interface. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Arnd Bergmann <arnd@arndb.de>
2019-12-10drivers: Fix boot problem on SuperHGuenter Roeck1-9/+2
SuperH images crash too eearly to display any console output. Bisect points to commit 507fd01d5333 ("drivers: move the early platform device support to arch/sh"). An analysis of that patch suggests that early_platform_cleanup() is now called at the wrong time. Restoring its call point fixes the problem. Cc: Bartosz Golaszewski <brgl@bgdev.pl> Fixes: 507fd01d5333 ("drivers: move the early platform device support to arch/sh") Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Rob Landley <rob@landley.net> Link: https://lore.kernel.org/r/20191203205852.15659-1-linux@roeck-us.net Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-27Merge tag 'driver-core-5.5-rc1' of ↵Linus Torvalds2-1/+348
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg KH: "Here is the "big" set of driver core patches for 5.5-rc1 There's a few minor cleanups and fixes in here, but the majority of the patches in here fall into two buckets: - debugfs api cleanups and fixes - driver core device link support for boot dependancy issues The debugfs api cleanups are working to slowly refactor the debugfs apis so that it is even harder to use incorrectly. That work has been happening for the past few kernel releases and will continue over time, it's a long-term project/goal The driver core device link support missed 5.4 by just a bit, so it's been sitting and baking for many months now. It's from Saravana Kannan to help resolve the problems that DT-based systems have at boot time with dependancy graphs and kernel modules. Turns out that no one has actually tried to build a generic arm64 kernel with loads of modules and have it "just work" for a variety of platforms (like a distro kernel). The big problem turned out to be a lack of dependency information between different areas of DT entries, and the work here resolves that problem and now allows devices to boot properly, and quicker than a monolith kernel. All of these patches have been in linux-next for a long time with no reported issues" * tag 'driver-core-5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (68 commits) tracing: Remove unnecessary DEBUG_FS dependency of: property: Add device link support for interrupt-parent, dmas and -gpio(s) debugfs: Fix !DEBUG_FS debugfs_create_automount of: property: Add device link support for "iommu-map" of: property: Fix the semantics of of_is_ancestor_of() i2c: of: Populate fwnode in of_i2c_get_board_info() drivers: base: Fix Kconfig indentation firmware_loader: Fix labels with comma for builtin firmware driver core: Allow device link operations inside sync_state() driver core: platform: Declare ret variable only once cpu-topology: declare parse_acpi_topology in <linux/arch_topology.h> crypto: hisilicon: no need to check return value of debugfs_create functions driver core: platform: use the correct callback type for bus_find_device firmware_class: make firmware caching configurable driver core: Clarify documentation for fwnode_operations.add_links() mailbox: tegra: Fix superfluous IRQ error message net: caif: Fix debugfs on 64-bit platforms mac80211: Use debugfs_create_xul() helper media: c8sectpfe: no need to check return value of debugfs_create functions of: property: Add device link support for iommus, mboxes and io-channels ...
2019-10-18sh: Use pr_warn instead of pr_warningKefeng Wang1-1/+1
As said in commit f2c2cbcc35d4 ("powerpc: Use pr_warn instead of pr_warning"), removing pr_warning so all logging messages use a consistent <prefix>_warn style. Let's do it. Link: http://lkml.kernel.org/r/20191018031850.48498-5-wangkefeng.wang@huawei.com To: linux-kernel@vger.kernel.org Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Rich Felker <dalias@libc.org> Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by: Petr Mladek <pmladek@suse.com>
2019-10-07sh: add the sh_ prefix to early platform symbolsBartosz Golaszewski1-33/+33
Old early platform device support is now sh-specific. Before moving on to implementing new early platform framework based on real platform devices, prefix all early platform symbols with 'sh_'. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Cc: Rich Felker <dalias@libc.org> Link: https://lore.kernel.org/r/20191003092913.10731-3-brgl@bgdev.pl Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-07drivers: move the early platform device support to arch/shBartosz Golaszewski2-1/+348
SuperH is the only user of the current implementation of early platform device support. We want to introduce a more robust approach to early probing. As the first step - move all the current early platform code to arch/sh. In order not to export internal drivers/base functions to arch code for this temporary solution - copy the two needed routines for driver matching from drivers/base/platform.c to arch/sh/drivers/platform_early.c. Also: call early_platform_cleanup() from subsys_initcall() so that it's called after all early devices are probed. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Cc: Rich Felker <dalias@libc.org> Link: https://lore.kernel.org/r/20191003092913.10731-2-brgl@bgdev.pl Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-14treewide: replace #include <asm/sizes.h> with #include <linux/sizes.h>Masahiro Yamada3-3/+3
Since commit dccd2304cc90 ("ARM: 7430/1: sizes.h: move from asm-generic to <linux/sizes.h>"), <asm/sizes.h> and <asm-generic/sizes.h> are just wrappers of <linux/sizes.h>. This commit replaces all <asm/sizes.h> and <asm-generic/sizes.h> to prepare for the removal. Link: http://lkml.kernel.org/r/1553267665-27228-1-git-send-email-yamada.masahiro@socionext.com Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-02-20dma-mapping: remove the DMA_MEMORY_EXCLUSIVE flagChristoph Hellwig1-2/+1
All users of dma_declare_coherent want their allocations to be exclusive, so default to exclusive allocations. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-28sh: drivers: convert to SPDX identifiersKuninori Morimoto33-124/+41
Update license to use SPDX-License-Identifier instead of verbose license text. As original license mentioned, it is GPL-2.0 in SPDX. Then, MODULE_LICENSE() should be "GPL v2" instead of "GPL". See ${LINUX}/include/linux/module.h "GPL" [GNU Public License v2 or later] "GPL v2" [GNU Public License v2] Link: http://lkml.kernel.org/r/87h8fsct0a.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Cc: Rich Felker <dalias@libc.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-07-30PCI: Call dma_debug_add_bus() for pci_bus_type from PCI coreChristoph Hellwig1-2/+0
There is nothing arch-specific about PCI or dma-debug, so call dma_debug_add_bus() from the PCI core just after registering the bus type. Most of dma-debug is already generic; this just adds reporting of pending dma-allocations on driver unload for arches other than powerpc, sh, and x86. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
2018-06-12treewide: kzalloc() -> kcalloc()Kees Cook2-2/+2
The kzalloc() function has a 2-factor argument form, kcalloc(). This patch replaces cases of: kzalloc(a * b, gfp) with: kcalloc(a * b, gfp) as well as handling cases of: kzalloc(a * b * c, gfp) with: kzalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kzalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kzalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(char) * COUNT + COUNT , ...) | kzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kzalloc + kcalloc ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kzalloc(C1 * C2 * C3, ...) | kzalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kzalloc(sizeof(THING) * C2, ...) | kzalloc(sizeof(TYPE) * C2, ...) | kzalloc(C1 * C2 * C3, ...) | kzalloc(C1 * C2, ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - (E1) * E2 + E1, E2 , ...) | - kzalloc + kcalloc ( - (E1) * (E2) + E1, E2 , ...) | - kzalloc + kcalloc ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-05-16proc: introduce proc_create_single{,_data}Christoph Hellwig1-13/+1
Variants of proc_create{,_data} that directly take a seq_file show callback and drastically reduces the boilerplate code in the callers. All trivial callers converted over. Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-04-12arch/sh: pcie-sh7786: handle non-zero DMA offsetThomas Petazzoni1-0/+8
On SuperH, the base of the physical memory might be different from zero. In this case, PCI address zero will map to a non-zero physical address. In order to make sure that the DMA mapping API takes care of this DMA offset, we must fill in the dev->dma_pfn_offset field for PCI devices. This gets done in the pcibios_bus_add_device() hook, called for each new PCI device detected. The dma_pfn_offset global variable is re-calculated for every PCI controller available on the platform, but that's not an issue because its value will each time be exactly the same, as it only depends on the memory start address and memory size. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Rich Felker <dalias@libc.org>
2018-04-12arch/sh: pcie-sh7786: adjust the memory mappingThomas Petazzoni1-5/+14
The code setting up the PCI -> SuperHighway mapping doesn't take into account the fact that the address stored in PCIELARx must be aligned with the size stored in PCIELAMRx. For example, when your physical memory starts at 0x0800_0000 (128 MB), a size of 64 MB or 128 MB is fine. However, if you have 256 MB of memory, it doesn't work because the base address is not aligned on the size. In such situation, we have to round down the base address to make sure it is aligned on the size of the area. For for a 0x0800_0000 base address with 256 MB of memory, we will round down to 0x0, and extend the size of the mapping to 512 MB. This allows the mapping to work on platforms that have 256 MB of RAM. The current setup would only work with 128 MB of RAM or less. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Rich Felker <dalias@libc.org>
2018-04-12arch/sh: pcie-sh7786: adjust PCI MEM and IO regionsThomas Petazzoni1-18/+18
The current definition of the PCIe IO and MEM resources for SH7786 doesn't match what the datasheet says. For example, for PCIe0 0xfe100000 is advertised by the datasheet as a PCI IO region, while 0xfd000000 is advertised as a PCI MEM region. The code currently inverts the two. The SH4A_PCIEPARL and SH4A_PCIEPTCTLR registers allow to define the base address and role of the different regions (including whether it's a MEM or IO region). However, practical experience on a SH7786 shows that if 0xfe100000 is used for LEL and 0xfd000000 for IO, a PCIe device using two MEM BARs cannot be accessed at all. Simply using 0xfe100000 for IO and 0xfd000000 for MEM makes the PCIe device accessible. It is very likely that this was never seen because there are two other PCI MEM region listed in the resources. However, for different reasons, none of the two other MEM regions are usable on the specific SH7786 platform the problem was encountered. Therefore, the last MEM region at 0xfe100000 was used to place the BARs, making the device non-functional. This commit therefore adjusts those PCI MEM and IO resources definitions so that they match what the datasheet says. They have only been tested with PCIe 0. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Rich Felker <dalias@libc.org>
2018-04-12arch/sh: pcie-sh7786: exclude unusable PCI MEM areasThomas Petazzoni1-0/+12
Depending on the physical memory layout, some PCI MEM areas are not usable. According to the SH7786 datasheet, the PCI MEM area from 1000_0000 to 13FF_FFFF is only usable if the physical memory layout (in MMSELR) is 1, 2, 5 or 6. In all other configurations, this PCI MEM area is not usable (because it overlaps with DRAM). Therefore, this commit adjusts the PCI SH7786 initialization to mark the relevant PCI resource as IORESOURCE_DISABLED if we can't use it. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Rich Felker <dalias@libc.org>
2018-04-12arch/sh: pcie-sh7786: mark unavailable PCI resource as disabledThomas Petazzoni1-0/+3
Some PCI MEM resources are marked as IORESOURCE_MEM_32BIT, which means they are only usable when the SH core runs in 32-bit mode. In 29-bit mode, such memory regions are not usable. The existing code for SH7786 properly skips such regions when configuring the PCIe controller registers. However, because such regions are still described in the resource array, the pcibios_scanbus() function in the SuperH pci.c will register them to the PCI core. Due to this, the PCI core will allocate MEM areas from this resource, and assign BARs pointing to this area, even though it's unusable. In order to prevent this from happening, we mark such regions as IORESOURCE_DISABLED, which tells the SuperH pci.c pcibios_scanbus() function to skip them. Note that we separate marking the region as disabled from skipping it, because other regions will be marked as disabled in follow-up patches. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Rich Felker <dalias@libc.org>
2018-04-12arch/sh: pci: don't use disabled resourcesThomas Petazzoni1-0/+5
In pcibios_scanbus(), we provide to the PCI core the usable MEM and IO regions using pci_add_resource_offset(). We travel through all resources available in the "struct pci_channel". Also, in register_pci_controller(), we travel through all resources to request them, making sure they don't conflict with already requested resources. However, some resources may be disabled, in which case they should not be requested nor provided to the PCI core. In the current situation, none of the resources are disabled. However, follow-up patches in this series will make some resources disabled, making this preliminary change necessary. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Rich Felker <dalias@libc.org>
2018-01-09treewide: Use DEVICE_ATTR_ROJoe Perches1-1/+1
Convert DEVICE_ATTR uses to DEVICE_ATTR_RO where possible. Done with perl script: $ git grep -w --name-only DEVICE_ATTR | \ xargs perl -i -e 'local $/; while (<>) { s/\bDEVICE_ATTR\s*\(\s*(\w+)\s*,\s*\(?(?:\s*S_IRUGO\s*|\s*0444\s*)\)?\s*,\s*\1_show\s*,\s*NULL\s*\)/DEVICE_ATTR_RO(\1)/g; print;}' Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Acked-by: Sagi Grimberg <sagi@grimberg.me> Acked-by: Zhang Rui <rui.zhang@intel.com> Acked-by: Harald Freudenberger <freude@linux.vnet.ibm.com> Acked-by: Jani Nikula <jani.nikula@intel.com> Acked-by: Corey Minyard <cminyard@mvista.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-21treewide: setup_timer() -> timer_setup()Kees Cook3-14/+12
This converts all remaining cases of the old setup_timer() API into using timer_setup(), where the callback argument is the structure already holding the struct timer_list. These should have no behavioral changes, since they just change which pointer is passed into the callback with the same available pointers after conversion. It handles the following examples, in addition to some other variations. Casting from unsigned long: void my_callback(unsigned long data) { struct something *ptr = (struct something *)data; ... } ... setup_timer(&ptr->my_timer, my_callback, ptr); and forced object casts: void my_callback(struct something *ptr) { ... } ... setup_timer(&ptr->my_timer, my_callback, (unsigned long)ptr); become: void my_callback(struct timer_list *t) { struct something *ptr = from_timer(ptr, t, my_timer); ... } ... timer_setup(&ptr->my_timer, my_callback, 0); Direct function assignments: void my_callback(unsigned long data) { struct something *ptr = (struct something *)data; ... } ... ptr->my_timer.function = my_callback; have a temporary cast added, along with converting the args: void my_callback(struct timer_list *t) { struct something *ptr = from_timer(ptr, t, my_timer); ... } ... ptr->my_timer.function = (TIMER_FUNC_TYPE)my_callback; And finally, callbacks without a data assignment: void my_callback(unsigned long data) { ... } ... setup_timer(&ptr->my_timer, my_callback, 0); have their argument renamed to verify they're unused during conversion: void my_callback(struct timer_list *unused) { ... } ... timer_setup(&ptr->my_timer, my_callback, 0); The conversion is done with the following Coccinelle script: spatch --very-quiet --all-includes --include-headers \ -I ./arch/x86/include -I ./arch/x86/include/generated \ -I ./include -I ./arch/x86/include/uapi \ -I ./arch/x86/include/generated/uapi -I ./include/uapi \ -I ./include/generated/uapi --include ./include/linux/kconfig.h \ --dir . \ --cocci-file ~/src/data/timer_setup.cocci @fix_address_of@ expression e; @@ setup_timer( -&(e) +&e , ...) // Update any raw setup_timer() usages that have a NULL callback, but // would otherwise match change_timer_function_usage, since the latter // will update all function assignments done in the face of a NULL // function initialization in setup_timer(). @change_timer_function_usage_NULL@ expression _E; identifier _timer; type _cast_data; @@ ( -setup_timer(&_E->_timer, NULL, _E); +timer_setup(&_E->_timer, NULL, 0); | -setup_timer(&_E->_timer, NULL, (_cast_data)_E); +timer_setup(&_E->_timer, NULL, 0); | -setup_timer(&_E._timer, NULL, &_E); +timer_setup(&_E._timer, NULL, 0); | -setup_timer(&_E._timer, NULL, (_cast_data)&_E); +timer_setup(&_E._timer, NULL, 0); ) @change_timer_function_usage@ expression _E; identifier _timer; struct timer_list _stl; identifier _callback; type _cast_func, _cast_data; @@ ( -setup_timer(&_E->_timer, _callback, _E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, &_callback, _E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, _callback, (_cast_data)_E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, &_callback, (_cast_data)_E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, (_cast_func)_callback, _E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, (_cast_func)&_callback, _E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, (_cast_func)_callback, (_cast_data)_E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, (_cast_func)&_callback, (_cast_data)_E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E._timer, _callback, (_cast_data)_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, _callback, (_cast_data)&_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, &_callback, (_cast_data)_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, &_callback, (_cast_data)&_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, (_cast_func)_callback, (_cast_data)_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, (_cast_func)_callback, (_cast_data)&_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, (_cast_func)&_callback, (_cast_data)_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, (_cast_func)&_callback, (_cast_data)&_E); +timer_setup(&_E._timer, _callback, 0); | _E->_timer@_stl.function = _callback; | _E->_timer@_stl.function = &_callback; | _E->_timer@_stl.function = (_cast_func)_callback; | _E->_timer@_stl.function = (_cast_func)&_callback; | _E._timer@_stl.function = _callback; | _E._timer@_stl.function = &_callback; | _E._timer@_stl.function = (_cast_func)_callback; | _E._timer@_stl.function = (_cast_func)&_callback; ) // callback(unsigned long arg) @change_callback_handle_cast depends on change_timer_function_usage@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._timer; type _origtype; identifier _origarg; type _handletype; identifier _handle; @@ void _callback( -_origtype _origarg +struct timer_list *t ) { ( ... when != _origarg _handletype *_handle = -(_handletype *)_origarg; +from_timer(_handle, t, _timer); ... when != _origarg | ... when != _origarg _handletype *_handle = -(void *)_origarg; +from_timer(_handle, t, _timer); ... when != _origarg | ... when != _origarg _handletype *_handle; ... when != _handle _handle = -(_handletype *)_origarg; +from_timer(_handle, t, _timer); ... when != _origarg | ... when != _origarg _handletype *_handle; ... when != _handle _handle = -(void *)_origarg; +from_timer(_handle, t, _timer); ... when != _origarg ) } // callback(unsigned long arg) without existing variable @change_callback_handle_cast_no_arg depends on change_timer_function_usage && !change_callback_handle_cast@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._timer; type _origtype; identifier _origarg; type _handletype; @@ void _callback( -_origtype _origarg +struct timer_list *t ) { + _handletype *_origarg = from_timer(_origarg, t, _timer); + ... when != _origarg - (_handletype *)_origarg + _origarg ... when != _origarg } // Avoid already converted callbacks. @match_callback_converted depends on change_timer_function_usage && !change_callback_handle_cast && !change_callback_handle_cast_no_arg@ identifier change_timer_function_usage._callback; identifier t; @@ void _callback(struct timer_list *t) { ... } // callback(struct something *handle) @change_callback_handle_arg depends on change_timer_function_usage && !match_callback_converted && !change_callback_handle_cast && !change_callback_handle_cast_no_arg@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._timer; type _handletype; identifier _handle; @@ void _callback( -_handletype *_handle +struct timer_list *t ) { + _handletype *_handle = from_timer(_handle, t, _timer); ... } // If change_callback_handle_arg ran on an empty function, remove // the added handler. @unchange_callback_handle_arg depends on change_timer_function_usage && change_callback_handle_arg@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._timer; type _handletype; identifier _handle; identifier t; @@ void _callback(struct timer_list *t) { - _handletype *_handle = from_timer(_handle, t, _timer); } // We only want to refactor the setup_timer() data argument if we've found // the matching callback. This undoes changes in change_timer_function_usage. @unchange_timer_function_usage depends on change_timer_function_usage && !change_callback_handle_cast && !change_callback_handle_cast_no_arg && !change_callback_handle_arg@ expression change_timer_function_usage._E; identifier change_timer_function_usage._timer; identifier change_timer_function_usage._callback; type change_timer_function_usage._cast_data; @@ ( -timer_setup(&_E->_timer, _callback, 0); +setup_timer(&_E->_timer, _callback, (_cast_data)_E); | -timer_setup(&_E._timer, _callback, 0); +setup_timer(&_E._timer, _callback, (_cast_data)&_E); ) // If we fixed a callback from a .function assignment, fix the // assignment cast now. @change_timer_function_assignment depends on change_timer_function_usage && (change_callback_handle_cast || change_callback_handle_cast_no_arg || change_callback_handle_arg)@ expression change_timer_function_usage._E; identifier change_timer_function_usage._timer; identifier change_timer_function_usage._callback; type _cast_func; typedef TIMER_FUNC_TYPE; @@ ( _E->_timer.function = -_callback +(TIMER_FUNC_TYPE)_callback ; | _E->_timer.function = -&_callback +(TIMER_FUNC_TYPE)_callback ; | _E->_timer.function = -(_cast_func)_callback; +(TIMER_FUNC_TYPE)_callback ; | _E->_timer.function = -(_cast_func)&_callback +(TIMER_FUNC_TYPE)_callback ; | _E._timer.function = -_callback +(TIMER_FUNC_TYPE)_callback ; | _E._timer.function = -&_callback; +(TIMER_FUNC_TYPE)_callback ; | _E._timer.function = -(_cast_func)_callback +(TIMER_FUNC_TYPE)_callback ; | _E._timer.function = -(_cast_func)&_callback +(TIMER_FUNC_TYPE)_callback ; ) // Sometimes timer functions are called directly. Replace matched args. @change_timer_function_calls depends on change_timer_function_usage && (change_callback_handle_cast || change_callback_handle_cast_no_arg || change_callback_handle_arg)@ expression _E; identifier change_timer_function_usage._timer; identifier change_timer_function_usage._callback; type _cast_data; @@ _callback( ( -(_cast_data)_E +&_E->_timer | -(_cast_data)&_E +&_E._timer | -_E +&_E->_timer ) ) // If a timer has been configured without a data argument, it can be // converted without regard to the callback argument, since it is unused. @match_timer_function_unused_data@ expression _E; identifier _timer; identifier _callback; @@ ( -setup_timer(&_E->_timer, _callback, 0); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, _callback, 0L); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, _callback, 0UL); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E._timer, _callback, 0); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, _callback, 0L); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, _callback, 0UL); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_timer, _callback, 0); +timer_setup(&_timer, _callback, 0); | -setup_timer(&_timer, _callback, 0L); +timer_setup(&_timer, _callback, 0); | -setup_timer(&_timer, _callback, 0UL); +timer_setup(&_timer, _callback, 0); | -setup_timer(_timer, _callback, 0); +timer_setup(_timer, _callback, 0); | -setup_timer(_timer, _callback, 0L); +timer_setup(_timer, _callback, 0); | -setup_timer(_timer, _callback, 0UL); +timer_setup(_timer, _callback, 0); ) @change_callback_unused_data depends on match_timer_function_unused_data@ identifier match_timer_function_unused_data._callback; type _origtype; identifier _origarg; @@ void _callback( -_origtype _origarg +struct timer_list *unused ) { ... when != _origarg } Signed-off-by: Kees Cook <keescook@chromium.org>
2017-11-21treewide: init_timer() -> setup_timer()Kees Cook2-10/+5
This mechanically converts all remaining cases of ancient open-coded timer setup with the old setup_timer() API, which is the first step in timer conversions. This has no behavioral changes, since it ultimately just changes the order of assignment to fields of struct timer_list when finding variations of: init_timer(&t); f.function = timer_callback; t.data = timer_callback_arg; to be converted into: setup_timer(&t, timer_callback, timer_callback_arg); The conversion is done with the following Coccinelle script, which is an improved version of scripts/cocci/api/setup_timer.cocci, in the following ways: - assignments-before-init_timer() cases - limit the .data case removal to the specific struct timer_list instance - handling calls by dereference (timer->field vs timer.field) spatch --very-quiet --all-includes --include-headers \ -I ./arch/x86/include -I ./arch/x86/include/generated \ -I ./include -I ./arch/x86/include/uapi \ -I ./arch/x86/include/generated/uapi -I ./include/uapi \ -I ./include/generated/uapi --include ./include/linux/kconfig.h \ --dir . \ --cocci-file ~/src/data/setup_timer.cocci @fix_address_of@ expression e; @@ init_timer( -&(e) +&e , ...) // Match the common cases first to avoid Coccinelle parsing loops with // "... when" clauses. @match_immediate_function_data_after_init_timer@ expression e, func, da; @@ -init_timer +setup_timer ( \(&e\|e\) +, func, da ); ( -\(e.function\|e->function\) = func; -\(e.data\|e->data\) = da; | -\(e.data\|e->data\) = da; -\(e.function\|e->function\) = func; ) @match_immediate_function_data_before_init_timer@ expression e, func, da; @@ ( -\(e.function\|e->function\) = func; -\(e.data\|e->data\) = da; | -\(e.data\|e->data\) = da; -\(e.function\|e->function\) = func; ) -init_timer +setup_timer ( \(&e\|e\) +, func, da ); @match_function_and_data_after_init_timer@ expression e, e2, e3, e4, e5, func, da; @@ -init_timer +setup_timer ( \(&e\|e\) +, func, da ); ... when != func = e2 when != da = e3 ( -e.function = func; ... when != da = e4 -e.data = da; | -e->function = func; ... when != da = e4 -e->data = da; | -e.data = da; ... when != func = e5 -e.function = func; | -e->data = da; ... when != func = e5 -e->function = func; ) @match_function_and_data_before_init_timer@ expression e, e2, e3, e4, e5, func, da; @@ ( -e.function = func; ... when != da = e4 -e.data = da; | -e->function = func; ... when != da = e4 -e->data = da; | -e.data = da; ... when != func = e5 -e.function = func; | -e->data = da; ... when != func = e5 -e->function = func; ) ... when != func = e2 when != da = e3 -init_timer +setup_timer ( \(&e\|e\) +, func, da ); @r1 exists@ expression t; identifier f; position p; @@ f(...) { ... when any init_timer@p(\(&t\|t\)) ... when any } @r2 exists@ expression r1.t; identifier g != r1.f; expression e8; @@ g(...) { ... when any \(t.data\|t->data\) = e8 ... when any } // It is dangerous to use setup_timer if data field is initialized // in another function. @script:python depends on r2@ p << r1.p; @@ cocci.include_match(False) @r3@ expression r1.t, func, e7; position r1.p; @@ ( -init_timer@p(&t); +setup_timer(&t, func, 0UL); ... when != func = e7 -t.function = func; | -t.function = func; ... when != func = e7 -init_timer@p(&t); +setup_timer(&t, func, 0UL); | -init_timer@p(t); +setup_timer(t, func, 0UL); ... when != func = e7 -t->function = func; | -t->function = func; ... when != func = e7 -init_timer@p(t); +setup_timer(t, func, 0UL); ) Signed-off-by: Kees Cook <keescook@chromium.org>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman9-0/+9
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-12Merge tag 'dma-mapping-4.14' of git://git.infradead.org/users/hch/dma-mappingLinus Torvalds1-2/+1
Pull dma-mapping updates from Christoph Hellwig: - removal of the old dma_alloc_noncoherent interface - remove unused flags to dma_declare_coherent_memory - restrict OF DMA configuration to specific physical busses - use the iommu mailing list for dma-mapping questions and patches * tag 'dma-mapping-4.14' of git://git.infradead.org/users/hch/dma-mapping: dma-coherent: fix dma_declare_coherent_memory() logic error ARM: imx: mx31moboard: Remove unused 'dma' variable dma-coherent: remove an unused variable MAINTAINERS: use the iommu list for the dma-mapping subsystem dma-coherent: remove the DMA_MEMORY_MAP and DMA_MEMORY_IO flags dma-coherent: remove the DMA_MEMORY_INCLUDES_CHILDREN flag of: restrict DMA configuration dma-mapping: remove dma_alloc_noncoherent and dma_free_noncoherent i825xx: switch to switch to dma_alloc_attrs au1000_eth: switch to dma_alloc_attrs sgiseeq: switch to dma_alloc_attrs dma-mapping: reduce dma_mapping_error inline bloat
2017-09-07Merge branch 'pci/resource' into nextBjorn Helgaas1-8/+0
* pci/resource: microblaze/PCI: Remove pcibios_setup_bus_{self/devices} dead code ARC: Remove empty kernel/pcibios.c PCI: Add a generic weak pcibios_align_resource() PCI: Add a generic weak pcibios_fixup_bus()
2017-09-01dma-coherent: remove the DMA_MEMORY_MAP and DMA_MEMORY_IO flagsChristoph Hellwig1-2/+1
DMA_MEMORY_IO was never used in the tree, so remove it. That means there is no need for the DMA_MEMORY_MAP flag either now, so remove it as well and change dma_declare_coherent_memory to return a normal errno value. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Marek Szyprowski <m.szyprowski@samsung.com>
2017-08-03sh/PCI: Replace pci_fixup_irqs() call with host bridge IRQ mapping hooksLorenzo Pieralisi1-16/+25
The pci_fixup_irqs() function allocates IRQs for all PCI devices present in a system; those PCI devices possibly belong to different PCI bus trees (and possibly rooted at different host bridges) and may well be enabled (ie probed and bound to a driver) by the time pci_fixup_irqs() is called when probing a given host bridge driver. Furthermore, current kernel code relying on pci_fixup_irqs() to assign legacy PCI IRQs to devices does not work at all for hotplugged devices in that the code carrying out the IRQ fixup is called at host bridge driver probe time, which just cannot take into account devices hotplugged after the system has booted. The introduction of map/swizzle function hooks in struct pci_host_bridge allows us to define per-bridge map/swizzle functions that can be used at device probe time in PCI core code to allocate IRQs for a given device (through pci_assign_irq()). Convert PCI host bridge initialization code to the pci_scan_root_bus_bridge() API (that allows to pass a struct pci_host_bridge with initialized map/swizzle pointers) and remove the pci_fixup_irqs() call from arch code. Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Rich Felker <dalias@libc.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
2017-08-03sh/PCI: Remove __init optimisations from IRQ mapping functions/dataMatthew Minter10-14/+14
Currently many IRQ mapping functions and data structures use the __init and __initdata optimisations. These result in the relevant functions being innaccessible after boot time. However for deferred IRQ assignment it is important to have access to these functions at PCI device enable time. Therefore, remove the optimisation from the relevant data structures and functions to prepare for deferred IRQ assignment. Signed-off-by: Matthew Minter <matt@masarand.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Rich Felker <dalias@libc.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
2017-08-02PCI: Add a generic weak pcibios_fixup_bus()Palmer Dabbelt1-8/+0
Multiple architectures define this as an empty function, and I'm adding another one as part of the RISC-V port. Add a __weak version of pcibios_fixup_bus() and delete the now-obselete ones in a handful of ports. The only functional change should be that microblaze used to export pcibios_fixup_bus(). None of the other architectures exports this, so I just dropped it. Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2017-04-20sh/PCI: Use generic pci_mmap_resource_range()David Woodhouse1-22/+0
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2017-04-20PCI: Add BAR index argument to pci_mmap_page_range()David Woodhouse1-1/+2
In all cases we know which BAR it is. Passing it in means that arch code (or generic code; watch this space) won't have to go looking for it again. Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2017-03-02sched/headers: Prepare for new header dependencies before moving code to ↵Ingo Molnar1-0/+1
<linux/sched/loadavg.h> We are going to split <linux/sched/loadavg.h> out of <linux/sched.h>, which will have to be picked up from a couple of .c files. Create a trivial placeholder <linux/sched/topology.h> file that just maps to <linux/sched.h> to make this patch obviously correct and bisectable. Include the new header in the files that are going to need it. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-08-06Merge tag 'sh-for-4.8' of git://git.libc.org/linux-shLinus Torvalds1-29/+3
Pull arch/sh updates from Rich Felker: "These changes improve device tree support (including builtin DTB), add support for the J-Core J2 processor, an open source synthesizable reimplementation of the SH-2 ISA, resolve a longstanding sigcontext ABI mismatch issue, and fix various bugs including nommu-specific issues and minor regressions introduced in 4.6. The J-Core arch support is included here but to be usable it needs drivers that are waiting on approval/inclusion from their subsystem maintainers" * tag 'sh-for-4.8' of git://git.libc.org/linux-sh: (23 commits) sh: add device tree source for J2 FPGA on Mimas v2 board sh: add defconfig for J-Core J2 sh: use common clock framework with device tree boards sh: system call wire up sh: Delete unnecessary checks before the function call "mempool_destroy" sh: do not perform IPI-based cache flush except on boards that need it sh: add SMP support for J2 sh: SMP support for SH2 entry.S sh: add working futex atomic ops on userspace addresses for smp sh: add J2 atomics using the cas.l instruction sh: add AT_HWCAP flag for J-Core cas.l instruction sh: add support for J-Core J2 processor sh: fix build regression with CONFIG_OF && !CONFIG_OF_FLATTREE sh: allow clocksource drivers to register sched_clock backends sh: make heartbeat driver explicitly non-modular sh: make board-secureedge5410 explicitly non-modular sh: make mm/asids-debugfs explicitly non-modular sh: make time.c explicitly non-modular sh: fix futex/robust_list on nommu models sh: disable aliased page logic on NOMMU models ...
2016-08-02treewide: replace obsolete _refok by __refFabian Frederick1-2/+2
There was only one use of __initdata_refok and __exit_refok __init_refok was used 46 times against 82 for __ref. Those definitions are obsolete since commit 312b1485fb50 ("Introduce new section reference annotations tags: __ref, __refdata, __refconst") This patch removes the following compatibility definitions and replaces them treewide. /* compatibility defines */ #define __init_refok __ref #define __initdata_refok __refdata #define __exit_refok __ref I can also provide separate patches if necessary. (One patch per tree and check in 1 month or 2 to remove old definitions) [akpm@linux-foundation.org: coding-style fixes] Link: http://lkml.kernel.org/r/1466796271-3043-1-git-send-email-fabf@skynet.be Signed-off-by: Fabian Frederick <fabf@skynet.be> Cc: Ingo Molnar <mingo@redhat.com> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-31sh: make heartbeat driver explicitly non-modularPaul Gortmaker1-29/+3
The Kconfig for this driver is currently: config HEARTBEAT bool "Heartbeat LED" ....meaning that it currently is not being built as a module by anyone. Lets remove the modular code that is essentially orphaned, so that when reading the driver there is no doubt it is builtin-only. Since module_init translates to device_initcall in the non-modular case, the init ordering remains unchanged with this commit. We explicitly disallow a driver unbind, since that doesn't have a sensible use case anyway, and it allows us to drop the ".remove" code for non-modular drivers. We also delete the MODULE_LICENSE tag etc. since all that information is already contained at the top of the file in the comments. Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Rich Felker <dalias@libc.org> Cc: linux-sh@vger.kernel.org Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Rich Felker <dalias@libc.org>
2015-07-27PCI: Remove unused "pci_probe" flagsBjorn Helgaas1-8/+0
The following flags are only used on x86, but they got copied to FR-V, MN10300, and SuperH: PCI_PROBE_BIOS PCI_PROBE_CONF1 PCI_PROBE_CONF2 PCI_ASSIGN_ROMS PCI_NO_CHECKS PCI_BIOS_IRQ_SCAN PCI_ASSIGN_ALL_BUSSES FR-V and MN10300 do test for PCI_ASSIGN_ROMS, but they never set it, so it's dead code. Remove the unused flags above. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2015-06-08PCI: Remove unnecessary #includes of <asm/pci.h>Bjorn Helgaas2-2/+0
In include/linux/pci.h, we already #include <asm/pci.h>, so we don't need to include <asm/pci.h> directly. Remove the unnecessary includes. All the files here already include <linux/pci.h>. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Simon Horman <horms+renesas@verge.net.au> # sh Acked-by: Ralf Baechle <ralf@linux-mips.org>
2015-03-19PCI: Cleanup control flowBjorn Helgaas1-12/+14
Return errors immediately so the straightline path is the normal, no-error path. No functional change. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2015-03-19PCI: Assign resources before drivers claim devices (pci_scan_root_bus())Yijing Wang1-0/+1
Previously, pci_scan_root_bus() created a root PCI bus, enumerated the devices on it, and called pci_bus_add_devices(), which made the devices available for drivers to claim them. Most callers assigned resources to devices after pci_scan_root_bus() returns, which may be after drivers have claimed the devices. This is incorrect; the PCI core should not change device resources while a driver is managing the device. Remove pci_bus_add_devices() from pci_scan_root_bus() and do it after any resource assignment in the callers. Note that ARM's pci_common_init_dev() already called pci_bus_add_devices() after pci_scan_root_bus(), so we only need to remove the first call: pci_common_init_dev pcibios_init_hw pci_scan_root_bus pci_bus_add_devices # first call pci_bus_assign_resources pci_bus_add_devices # second call [bhelgaas: changelog, drop "root_bus" var in alpha common_init_pci(), return failure earlier in mn10300, add "return" in x86 pcibios_scan_root(), return early if xtensa platform_pcibios_fixup() fails] Signed-off-by: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: Richard Henderson <rth@twiddle.net> CC: Ivan Kokshaysky <ink@jurassic.park.msu.ru> CC: Matt Turner <mattst88@gmail.com> CC: David Howells <dhowells@redhat.com> CC: Tony Luck <tony.luck@intel.com> CC: Michal Simek <monstr@monstr.eu> CC: Ralf Baechle <ralf@linux-mips.org> CC: Koichi Yasutake <yasutake.koichi@jp.panasonic.com> CC: Sebastian Ott <sebott@linux.vnet.ibm.com> CC: "David S. Miller" <davem@davemloft.net> CC: Chris Metcalf <cmetcalf@ezchip.com> CC: Chris Zankel <chris@zankel.net> CC: Max Filippov <jcmvbkbc@gmail.com> CC: Thomas Gleixner <tglx@linutronix.de>
2014-08-11Merge branch 'for-linus' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds1-1/+1
Pull slave-dma updates from Vinod Koul: "Some notable changes are: - new driver for AMBA AXI NBPF by Guennadi - new driver for sun6i controller by Maxime - pl330 drivers fixes from Lar's - sh-dma updates and fixes from Laurent, Geert and Kuninori - Documentation updates from Geert - drivers fixes and updates spread over dw, edma, freescale, mpc512x etc.." * 'for-linus' of git://git.infradead.org/users/vkoul/slave-dma: (72 commits) dmaengine: sun6i: depends on RESET_CONTROLLER dma: at_hdmac: fix invalid remaining bytes detection dmaengine: nbpfaxi: don't build this driver where it cannot be used dmaengine: nbpf_error_get_channel() can be static dma: pl08x: Use correct specifier for size_t values dmaengine: Remove the context argument to the prep_dma_cyclic operation dmaengine: nbpfaxi: convert to tasklet dmaengine: nbpfaxi: fix a theoretical race dmaengine: add a driver for AMBA AXI NBPF DMAC IP cores dmaengine: add device tree binding documentation for the nbpfaxi driver dmaengine: edma: Do not register second device when booted with DT dmaengine: edma: Do not change the error code returned from edma_alloc_slot dmaengine: rcar-dmac: Add device tree bindings documentation dmaengine: shdma: Allocate cyclic sg list dynamically dmaengine: shdma: Make channel filter ignore unrelated devices dmaengine: sh: Rework Kconfig and Makefile dmaengine: sun6i: Fix memory leaks dmaengine: sun6i: Free the interrupt before killing the tasklet dmaengine: sun6i: Remove switch statement from buswidth convertion routine dmaengine: of: kconfig: select DMA_ENGINE when DMA_OF is selected ...