summaryrefslogtreecommitdiffstats
path: root/arch/score
AgeCommit message (Collapse)AuthorFilesLines
2018-03-09arch: remove score portArnd Bergmann127-7695/+0
The Sunplus S+core architecture was added in 2009 by Chen Liqin, who has been co-maintaining it with Lennox Wu <lennox.wu@gmail.com> since then, but after they both left the company, nobody else has shown any interest in the port and it has seen almost no activity other than tree-wide changes. The gcc port was removed a few years ago due to the inactivity. While the sunplus website still advertises products with unspecified RISC cores that might be S+core based, it's very clear that the Linux port is completely abandoned at this point. This removes all files related to the architecture. Acked-by: Lennox Wu <lennox.wu@gmail.com> Link: http://www.sunplus.com/ Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-02-06arch/score/kernel/setup.c: combine two seq_printf() calls into one call in ↵Markus Elfring1-3/+1
show_cpuinfo() Some data were printed into a sequence by two separate function calls. Print the same data by a single function call instead. This issue was detected by using the Coccinelle software. Link: http://lkml.kernel.org/r/ddcfff3a-9502-6ce0-b08a-365eb55ce958@users.sourceforge.net Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Cc: Chen Liqin <liqin.linux@gmail.com> Cc: Lennox Wu <lennox.wu@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-02-01Merge tag 'clk-for-linus' of ↵Linus Torvalds1-1/+0
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "The core framework has a handful of patches this time around, mostly due to the clk rate protection support added by Jerome Brunet. This feature will allow consumers to lock in a certain rate on the output of a clk so that things like audio playback don't hear pops when the clk frequency changes due to shared parent clks changing rates. Currently the clk API doesn't guarantee the rate of a clk stays at the rate you request after clk_set_rate() is called, so this new API will allow drivers to express that requirement. Beyond this, the core got some debugfs pretty printing patches and a couple minor non-critical fixes. Looking outside of the core framework diff we have some new driver additions and the removal of a legacy TI clk driver. Both of these hit high in the dirstat. Also, the removal of the asm-generic/clkdev.h file causes small one-liners in all the architecture Kbuild files. Overall, the driver diff seems to be the normal stuff that comes all the time to fix little problems here and there and to support new hardware. Summary: Core: - Clk rate protection - Symbolic clk flags in debugfs output - Clk registration enabled clks while doing bookkeeping updates New Drivers: - Spreadtrum SC9860 - HiSilicon hi3660 stub - Qualcomm A53 PLL, SPMI clkdiv, and MSM8916 APCS - Amlogic Meson-AXG - ASPEED BMC Removed Drivers: - TI OMAP 3xxx legacy clk (non-DT) support - asm*/clkdev.h got removed (not really a driver) Updates: - Renesas FDP1-0 module clock on R-Car M3-W - Renesas LVDS module clock on R-Car V3M - Misc fixes to pr_err() prints - Qualcomm MSM8916 audio fixes - Qualcomm IPQ8074 rounded out support for more peripherals - Qualcomm Alpha PLL variants - Divider code was using container_of() on bad pointers - Allwinner DE2 clks on H3 - Amlogic minor data fixes and dropping of CLK_IGNORE_UNUSED - Mediatek clk driver compile test support - AT91 PMC clk suspend/resume restoration support - PLL issues fixed on si5351 - Broadcom IProc PLL calculation updates - DVFS support for Armada mvebu CPU clks - Allwinner fixed post-divider support - TI clkctrl fixes and support for newer SoCs" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (125 commits) clk: aspeed: Handle inverse polarity of USB port 1 clock gate clk: aspeed: Fix return value check in aspeed_cc_init() clk: aspeed: Add reset controller clk: aspeed: Register gated clocks clk: aspeed: Add platform driver and register PLLs clk: aspeed: Register core clocks clk: Add clock driver for ASPEED BMC SoCs clk: mediatek: adjust dependency of reset.c to avoid unexpectedly being built clk: fix reentrancy of clk_enable() on UP systems clk: meson-axg: fix potential NULL dereference in axg_clkc_probe() clk: Simplify debugfs registration clk: Fix debugfs_create_*() usage clk: Show symbolic clock flags in debugfs clk: renesas: r8a7796: Add FDP clock clk: Move __clk_{get,put}() into private clk.h API clk: sunxi: Use CLK_IS_CRITICAL flag for critical clks clk: Improve flags doc for of_clk_detect_critical() arch: Remove clkdev.h asm-generic from Kbuild clk: sunxi-ng: a83t: Add M divider to TCON1 clock clk: Prepare to remove asm-generic/clkdev.h ...
2018-01-30Merge branch 'misc.poll' of ↵Linus Torvalds2-7/+1
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull poll annotations from Al Viro: "This introduces a __bitwise type for POLL### bitmap, and propagates the annotations through the tree. Most of that stuff is as simple as 'make ->poll() instances return __poll_t and do the same to local variables used to hold the future return value'. Some of the obvious brainos found in process are fixed (e.g. POLLIN misspelled as POLL_IN). At that point the amount of sparse warnings is low and most of them are for genuine bugs - e.g. ->poll() instance deciding to return -EINVAL instead of a bitmap. I hadn't touched those in this series - it's large enough as it is. Another problem it has caught was eventpoll() ABI mess; select.c and eventpoll.c assumed that corresponding POLL### and EPOLL### were equal. That's true for some, but not all of them - EPOLL### are arch-independent, but POLL### are not. The last commit in this series separates userland POLL### values from the (now arch-independent) kernel-side ones, converting between them in the few places where they are copied to/from userland. AFAICS, this is the least disruptive fix preserving poll(2) ABI and making epoll() work on all architectures. As it is, it's simply broken on sparc - try to give it EPOLLWRNORM and it will trigger only on what would've triggered EPOLLWRBAND on other architectures. EPOLLWRBAND and EPOLLRDHUP, OTOH, are never triggered at all on sparc. With this patch they should work consistently on all architectures" * 'misc.poll' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (37 commits) make kernel-side POLL... arch-independent eventpoll: no need to mask the result of epi_item_poll() again eventpoll: constify struct epoll_event pointers debugging printk in sg_poll() uses %x to print POLL... bitmap annotate poll(2) guts 9p: untangle ->poll() mess ->si_band gets POLL... bitmap stored into a user-visible long field ring_buffer_poll_wait() return value used as return value of ->poll() the rest of drivers/*: annotate ->poll() instances media: annotate ->poll() instances fs: annotate ->poll() instances ipc, kernel, mm: annotate ->poll() instances net: annotate ->poll() instances apparmor: annotate ->poll() instances tomoyo: annotate ->poll() instances sound: annotate ->poll() instances acpi: annotate ->poll() instances crypto: annotate ->poll() instances block: annotate ->poll() instances x86: annotate ->poll() instances ...
2018-01-09Construct init thread stack in the linker script rather than by unionDavid Howells1-3/+0
Construct the init thread stack in the linker script rather than doing it by means of a union so that ia64's init_task.c can be got rid of. The following symbols are then made available from INIT_TASK_DATA() linker script macro: init_thread_union init_stack INIT_TASK_DATA() also expands the region to THREAD_SIZE to accommodate the size of the init stack. init_thread_union is given its own section so that it can be placed into the stack space in the right order. I'm assuming that the ia64 ordering is correct and that the task_struct is first and the thread_info second. Signed-off-by: David Howells <dhowells@redhat.com> Tested-by: Tony Luck <tony.luck@intel.com> Tested-by: Will Deacon <will.deacon@arm.com> (arm64) Tested-by: Palmer Dabbelt <palmer@sifive.com> Acked-by: Thomas Gleixner <tglx@linutronix.de>
2018-01-03arch: Remove clkdev.h asm-generic from KbuildStephen Boyd1-1/+0
Now that every architecture is using the generic clkdev.h file and we no longer include asm/clkdev.h anywhere in the tree, we can remove it. Cc: Russell King <linux@armlinux.org.uk> Acked-by: Arnd Bergmann <arnd@arndb.de> Cc: <linux-arch@vger.kernel.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> [m68k] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-12-05bpf: correct broken uapi for BPF_PROG_TYPE_PERF_EVENT program typeHendrik Brueckner1-0/+1
Commit 0515e5999a466dfe ("bpf: introduce BPF_PROG_TYPE_PERF_EVENT program type") introduced the bpf_perf_event_data structure which exports the pt_regs structure. This is OK for multiple architectures but fail for s390 and arm64 which do not export pt_regs. Programs using them, for example, the bpf selftest fail to compile on these architectures. For s390, exporting the pt_regs is not an option because s390 wants to allow changes to it. For arm64, there is a user_pt_regs structure that covers parts of the pt_regs structure for use by user space. To solve the broken uapi for s390 and arm64, introduce an abstract type for pt_regs and add an asm/bpf_perf_event.h file that concretes the type. An asm-generic header file covers the architectures that export pt_regs today. The arch-specific enablement for s390 and arm64 follows in separate commits. Reported-by: Thomas Richter <tmricht@linux.vnet.ibm.com> Fixes: 0515e5999a466dfe ("bpf: introduce BPF_PROG_TYPE_PERF_EVENT program type") Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Reviewed-and-tested-by: Thomas Richter <tmricht@linux.vnet.ibm.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-11-27switch wrapper poll.h instances to generic-yAl Viro2-7/+1
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-11-02License cleanup: add SPDX license identifier to uapi header files with no ↵Greg Kroah-Hartman29-0/+29
license Many user space API headers are missing licensing information, which makes it hard for compliance tools to determine the correct license. By default are files without license information under the default license of the kernel, which is GPLV2. Marking them GPLV2 would exclude them from being included in non GPLV2 code, which is obviously not intended. The user space API headers fall under the syscall exception which is in the kernels COPYING file: NOTE! This copyright does *not* cover user programs that use kernel services by normal system calls - this is merely considered normal use of the kernel, and does *not* fall under the heading of "derived work". otherwise syscall usage would not be possible. Update the files which contain no license information with an SPDX license identifier. The chosen identifier is 'GPL-2.0 WITH Linux-syscall-note' which is the officially assigned identifier for the Linux syscall exception. SPDX license identifiers are a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. See the previous patch in this series for the methodology of how this patch was researched. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman56-0/+56
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-06Merge branch 'uaccess.strlen' of ↵Linus Torvalds2-34/+0
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull user access str* updates from Al Viro: "uaccess str...() dead code removal" * 'uaccess.strlen' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: s390 keyboard.c: don't open-code strndup_user() mips: get rid of unused __strnlen_user() get rid of unused __strncpy_from_user() instances kill strlen_user()
2017-07-03Merge branch 'timers-core-for-linus' of ↵Linus Torvalds2-6/+2
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer updates from Thomas Gleixner: "A rather large update for timers/timekeeping: - compat syscall consolidation (Al Viro) - Posix timer consolidation (Christoph Helwig / Thomas Gleixner) - Cleanup of the device tree based initialization for clockevents and clocksources (Daniel Lezcano) - Consolidation of the FTTMR010 clocksource/event driver (Linus Walleij) - The usual set of small fixes and updates all over the place" * 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (93 commits) timers: Make the cpu base lock raw clocksource/drivers/mips-gic-timer: Fix an error code in 'gic_clocksource_of_init()' clocksource/drivers/fsl_ftm_timer: Unmap region obtained by of_iomap clocksource/drivers/tcb_clksrc: Make IO endian agnostic clocksource/drivers/sun4i: Switch to the timer-of common init clocksource/drivers/timer-of: Fix invalid iomap check Revert "ktime: Simplify ktime_compare implementation" clocksource/drivers: Fix uninitialized variable use in timer_of_init kselftests: timers: Add test for frequency step kselftests: timers: Fix inconsistency-check to not ignore first timestamp time: Add warning about imminent deprecation of CONFIG_GENERIC_TIME_VSYSCALL_OLD time: Clean up CLOCK_MONOTONIC_RAW time handling posix-cpu-timers: Make timespec to nsec conversion safe itimer: Make timeval to nsec conversion range limited timers: Fix parameter description of try_to_del_timer_sync() ktime: Simplify ktime_compare implementation clocksource/drivers/fttmr010: Factor out clock read code clocksource/drivers/fttmr010: Implement delay timer clocksource/drivers: Add timer-of common init routine clocksource/drivers/tcb_clksrc: Save timer context on suspend/resume ...
2017-06-28arch: remove unused macro/function thread_saved_pc()Tobias Klauser2-6/+0
The only user of thread_saved_pc() in non-arch-specific code was removed in commit 8243d5597793 ("sched/core: Remove pointless printout in sched_show_task()"). Remove the implementations as well. Some architectures use thread_saved_pc() in their arch-specific code. Leave their thread_saved_pc() intact. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Ingo Molnar <mingo@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-06-04signal: Remove non-uapi <asm/siginfo.h>Christoph Hellwig2-6/+2
By moving the kernel side __SI_* defintions right next to the userspace ones we can kill the non-uapi versions of <asm/siginfo.h> include include/asm-generic/siginfo.h and untangle the unholy mess of includes. [ tglx: Removed uapi/asm/siginfo.h from m32r, microblaze, mn10300 and score ] Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: linux-arch@vger.kernel.org Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Tony Luck <tony.luck@intel.com> Cc: linux-ia64@vger.kernel.org Cc: Arnd Bergmann <arnd@arndb.de> Cc: sparclinux@vger.kernel.org Cc: "David S. Miller" <davem@davemloft.net> Link: http://lkml.kernel.org/r/20170603190102.28866-6-hch@lst.de
2017-05-15kill strlen_user()Al Viro2-34/+0
no callers, no consistent semantics, no sane way to use it... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-05-11uapi: export all headers under uapi directoriesNicolas Dichtel2-35/+0
Regularly, when a new header is created in include/uapi/, the developer forgets to add it in the corresponding Kbuild file. This error is usually detected after the release is out. In fact, all headers under uapi directories should be exported, thus it's useless to have an exhaustive list. After this patch, the following files, which were not exported, are now exported (with make headers_install_all): asm-arc/kvm_para.h asm-arc/ucontext.h asm-blackfin/shmparam.h asm-blackfin/ucontext.h asm-c6x/shmparam.h asm-c6x/ucontext.h asm-cris/kvm_para.h asm-h8300/shmparam.h asm-h8300/ucontext.h asm-hexagon/shmparam.h asm-m32r/kvm_para.h asm-m68k/kvm_para.h asm-m68k/shmparam.h asm-metag/kvm_para.h asm-metag/shmparam.h asm-metag/ucontext.h asm-mips/hwcap.h asm-mips/reg.h asm-mips/ucontext.h asm-nios2/kvm_para.h asm-nios2/ucontext.h asm-openrisc/shmparam.h asm-parisc/kvm_para.h asm-powerpc/perf_regs.h asm-sh/kvm_para.h asm-sh/ucontext.h asm-tile/shmparam.h asm-unicore32/shmparam.h asm-unicore32/ucontext.h asm-x86/hwcap2.h asm-xtensa/kvm_para.h drm/armada_drm.h drm/etnaviv_drm.h drm/vgem_drm.h linux/aspeed-lpc-ctrl.h linux/auto_dev-ioctl.h linux/bcache.h linux/btrfs_tree.h linux/can/vxcan.h linux/cifs/cifs_mount.h linux/coresight-stm.h linux/cryptouser.h linux/fsmap.h linux/genwqe/genwqe_card.h linux/hash_info.h linux/kcm.h linux/kcov.h linux/kfd_ioctl.h linux/lightnvm.h linux/module.h linux/nbd-netlink.h linux/nilfs2_api.h linux/nilfs2_ondisk.h linux/nsfs.h linux/pr.h linux/qrtr.h linux/rpmsg.h linux/sched/types.h linux/sed-opal.h linux/smc.h linux/smc_diag.h linux/stm.h linux/switchtec_ioctl.h linux/vfio_ccw.h linux/wil6210_uapi.h rdma/bnxt_re-abi.h Note that I have removed from this list the files which are generated in every exported directories (like .install or .install.cmd). Thanks to Julien Floret <julien.floret@6wind.com> for the tip to get all subdirs with a pure makefile command. For the record, note that exported files for asm directories are a mix of files listed by: - include/uapi/asm-generic/Kbuild.asm; - arch/<arch>/include/uapi/asm/Kbuild; - arch/<arch>/include/asm/Kbuild. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Russell King <rmk+kernel@armlinux.org.uk> Acked-by: Mark Salter <msalter@redhat.com> Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc) Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-05-01Merge branch 'timers-core-for-linus' of ↵Linus Torvalds1-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer updates from Thomas Gleixner: "The timer departement delivers: - more year 2038 rework - a massive rework of the arm achitected timer - preparatory patches to allow NTP correction of clock event devices to avoid early expiry - the usual pile of fixes and enhancements all over the place" * 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (91 commits) timer/sysclt: Restrict timer migration sysctl values to 0 and 1 arm64/arch_timer: Mark errata handlers as __maybe_unused Clocksource/mips-gic: Remove redundant non devicetree init MIPS/Malta: Probe gic-timer via devicetree clocksource: Use GENMASK_ULL in definition of CLOCKSOURCE_MASK acpi/arm64: Add SBSA Generic Watchdog support in GTDT driver clocksource: arm_arch_timer: add GTDT support for memory-mapped timer acpi/arm64: Add memory-mapped timer support in GTDT driver clocksource: arm_arch_timer: simplify ACPI support code. acpi/arm64: Add GTDT table parse driver clocksource: arm_arch_timer: split MMIO timer probing. clocksource: arm_arch_timer: add structs to describe MMIO timer clocksource: arm_arch_timer: move arch_timer_needs_of_probing into DT init call clocksource: arm_arch_timer: refactor arch_timer_needs_probing clocksource: arm_arch_timer: split dt-only rate handling x86/uv/time: Set ->min_delta_ticks and ->max_delta_ticks unicore32/time: Set ->min_delta_ticks and ->max_delta_ticks um/time: Set ->min_delta_ticks and ->max_delta_ticks tile/time: Set ->min_delta_ticks and ->max_delta_ticks score/time: Set ->min_delta_ticks and ->max_delta_ticks ...
2017-04-26CONFIG_ARCH_HAS_RAW_COPY_USER is unconditional nowAl Viro1-1/+0
all architectures converted Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-04-26Merge branches 'uaccess.alpha', 'uaccess.arc', 'uaccess.arm', ↵Al Viro7-64/+12
'uaccess.arm64', 'uaccess.avr32', 'uaccess.bfin', 'uaccess.c6x', 'uaccess.cris', 'uaccess.frv', 'uaccess.h8300', 'uaccess.hexagon', 'uaccess.ia64', 'uaccess.m32r', 'uaccess.m68k', 'uaccess.metag', 'uaccess.microblaze', 'uaccess.mips', 'uaccess.mn10300', 'uaccess.nios2', 'uaccess.openrisc', 'uaccess.parisc', 'uaccess.powerpc', 'uaccess.s390', 'uaccess.score', 'uaccess.sh', 'uaccess.sparc', 'uaccess.tile', 'uaccess.um', 'uaccess.unicore32', 'uaccess.x86' and 'uaccess.xtensa' into work.uaccess
2017-04-14score/time: Set ->min_delta_ticks and ->max_delta_ticksNicolai Stange1-0/+2
In preparation for making the clockevents core NTP correction aware, all clockevent device drivers must set ->min_delta_ticks and ->max_delta_ticks rather than ->min_delta_ns and ->max_delta_ns: a clockevent device's rate is going to change dynamically and thus, the ratio of ns to ticks ceases to stay invariant. Make the score arch's clockevent driver initialize these fields properly. This patch alone doesn't introduce any change in functionality as the clockevents core still looks exclusively at the (untouched) ->min_delta_ns and ->max_delta_ns. As soon as this has changed, a followup patch will purge the initialization of ->min_delta_ns and ->max_delta_ns from this driver. Cc: Ingo Molnar <mingo@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Richard Cochran <richardcochran@gmail.com> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Chen Liqin <liqin.linux@gmail.com> Cc: Lennox Wu <lennox.wu@gmail.com> Signed-off-by: Nicolai Stange <nicstange@gmail.com> Signed-off-by: John Stultz <john.stultz@linaro.org>
2017-04-02Merge branch 'parisc-4.11-3' of ↵Al Viro3-0/+4
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux into uaccess.parisc
2017-03-28score: switch to RAW_COPY_USERAl Viro2-48/+7
... and kill copy_in_user() - it's not a biarch architecture, to start with Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-03-28score: it's "VERIFY_WRITE", not "VERFITY_WRITE"...Al Viro1-1/+1
... and the only reason it worked is that access_ok() discards the first argument before parser even gets a chance of looking at it. Still, no point keeping that typo. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-03-28score: switch to generic extable.hAl Viro2-11/+1
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-03-11Merge tag 'extable-fix' of ↵Linus Torvalds2-0/+3
git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux Pull extable.h fix from Paul Gortmaker: "Fixup for arch/score after extable.h introduction. It seems that Guenter is the only one on the planet doing builds for arch/score -- we don't have compile coverage for it in linux-next or in the kbuild-bot either. Guenter couldn't even recall where he got his toolchain, but was kind enough to share it with me so I could validate this change and also add arch/score to my build coverage. I sat on this a bit in case there was any other fallout in other arch dirs, but since this still seems to be the only one, I might as well send it on its way" * tag 'extable-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux: score: Fix implicit includes now failing build after extable change
2017-03-11score: Fix implicit includes now failing build after extable changeGuenter Roeck2-0/+3
After changing from module.h to extable.h, score builds fail with: arch/score/kernel/traps.c: In function 'do_ri': arch/score/kernel/traps.c:248:4: error: implicit declaration of function 'user_disable_single_step' arch/score/mm/extable.c: In function 'fixup_exception': arch/score/mm/extable.c:32:38: error: dereferencing pointer to incomplete type arch/score/mm/extable.c:34:24: error: dereferencing pointer to incomplete type because extable.h doesn't drag in the same amount of headers as the module.h did. Add in the headers which were implicitly expected. Fixes: 90858794c960 ("module.h: remove extable.h include now users have migrated") Signed-off-by: Guenter Roeck <linux@roeck-us.net> [PG: tweak commit log; refresh for sched header refactoring.] Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2017-03-09arch, mm: convert all architectures to use 5level-fixup.hKirill A. Shutemov1-0/+1
If an architecture uses 4level-fixup.h we don't need to do anything as it includes 5level-fixup.h. If an architecture uses pgtable-nop*d.h, define __ARCH_USE_5LEVEL_HACK before inclusion of the header. It makes asm-generic code to use 5level-fixup.h. If an architecture has 4-level paging or folds levels on its own, include 5level-fixup.h directly. Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-03-05uaccess: drop duplicate includes from asm/uaccess.hAl Viro1-2/+0
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-03-05uaccess: move VERIFY_{READ,WRITE} definitions to linux/uaccess.hAl Viro1-3/+0
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-03-03sched/headers: Move task->mm handling methods to <linux/sched/mm.h>Ingo Molnar1-0/+1
Move the following task->mm helper APIs into a new header file, <linux/sched/mm.h>, to further reduce the size and complexity of <linux/sched.h>. Here are how the APIs are used in various kernel files: # mm_alloc(): arch/arm/mach-rpc/ecard.c fs/exec.c include/linux/sched/mm.h kernel/fork.c # __mmdrop(): arch/arc/include/asm/mmu_context.h include/linux/sched/mm.h kernel/fork.c # mmdrop(): arch/arm/mach-rpc/ecard.c arch/m68k/sun3/mmu_emu.c arch/x86/mm/tlb.c drivers/gpu/drm/amd/amdkfd/kfd_process.c drivers/gpu/drm/i915/i915_gem_userptr.c drivers/infiniband/hw/hfi1/file_ops.c drivers/vfio/vfio_iommu_spapr_tce.c fs/exec.c fs/proc/base.c fs/proc/task_mmu.c fs/proc/task_nommu.c fs/userfaultfd.c include/linux/mmu_notifier.h include/linux/sched/mm.h kernel/fork.c kernel/futex.c kernel/sched/core.c mm/khugepaged.c mm/ksm.c mm/mmu_context.c mm/mmu_notifier.c mm/oom_kill.c virt/kvm/kvm_main.c # mmdrop_async_fn(): include/linux/sched/mm.h # mmdrop_async(): include/linux/sched/mm.h kernel/fork.c # mmget_not_zero(): fs/userfaultfd.c include/linux/sched/mm.h mm/oom_kill.c # mmput(): arch/arc/include/asm/mmu_context.h arch/arc/kernel/troubleshoot.c arch/frv/mm/mmu-context.c arch/powerpc/platforms/cell/spufs/context.c arch/sparc/include/asm/mmu_context_32.h drivers/android/binder.c drivers/gpu/drm/etnaviv/etnaviv_gem.c drivers/gpu/drm/i915/i915_gem_userptr.c drivers/infiniband/core/umem.c drivers/infiniband/core/umem_odp.c drivers/infiniband/core/uverbs_main.c drivers/infiniband/hw/mlx4/main.c drivers/infiniband/hw/mlx5/main.c drivers/infiniband/hw/usnic/usnic_uiom.c drivers/iommu/amd_iommu_v2.c drivers/iommu/intel-svm.c drivers/lguest/lguest_user.c drivers/misc/cxl/fault.c drivers/misc/mic/scif/scif_rma.c drivers/oprofile/buffer_sync.c drivers/vfio/vfio_iommu_type1.c drivers/vhost/vhost.c drivers/xen/gntdev.c fs/exec.c fs/proc/array.c fs/proc/base.c fs/proc/task_mmu.c fs/proc/task_nommu.c fs/userfaultfd.c include/linux/sched/mm.h kernel/cpuset.c kernel/events/core.c kernel/events/uprobes.c kernel/exit.c kernel/fork.c kernel/ptrace.c kernel/sys.c kernel/trace/trace_output.c kernel/tsacct.c mm/memcontrol.c mm/memory.c mm/mempolicy.c mm/migrate.c mm/mmu_notifier.c mm/nommu.c mm/oom_kill.c mm/process_vm_access.c mm/rmap.c mm/swapfile.c mm/util.c virt/kvm/async_pf.c # mmput_async(): include/linux/sched/mm.h kernel/fork.c mm/oom_kill.c # get_task_mm(): arch/arc/kernel/troubleshoot.c arch/powerpc/platforms/cell/spufs/context.c drivers/android/binder.c drivers/gpu/drm/etnaviv/etnaviv_gem.c drivers/infiniband/core/umem.c drivers/infiniband/core/umem_odp.c drivers/infiniband/hw/mlx4/main.c drivers/infiniband/hw/mlx5/main.c drivers/infiniband/hw/usnic/usnic_uiom.c drivers/iommu/amd_iommu_v2.c drivers/iommu/intel-svm.c drivers/lguest/lguest_user.c drivers/misc/cxl/fault.c drivers/misc/mic/scif/scif_rma.c drivers/oprofile/buffer_sync.c drivers/vfio/vfio_iommu_type1.c drivers/vhost/vhost.c drivers/xen/gntdev.c fs/proc/array.c fs/proc/base.c fs/proc/task_mmu.c include/linux/sched/mm.h kernel/cpuset.c kernel/events/core.c kernel/exit.c kernel/fork.c kernel/ptrace.c kernel/sys.c kernel/trace/trace_output.c kernel/tsacct.c mm/memcontrol.c mm/memory.c mm/mempolicy.c mm/migrate.c mm/mmu_notifier.c mm/nommu.c mm/util.c # mm_access(): fs/proc/base.c include/linux/sched/mm.h kernel/fork.c mm/process_vm_access.c # mm_release(): arch/arc/include/asm/mmu_context.h fs/exec.c include/linux/sched/mm.h include/uapi/linux/sched.h kernel/exit.c kernel/fork.c Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-03-02sched/headers: Prepare to remove the <linux/mm_types.h> dependency from ↵Ingo Molnar2-0/+3
<linux/sched.h> Update code that relied on sched.h including various MM types for them. This will allow us to remove the <linux/mm_types.h> include from <linux/sched.h>. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-03-02sched/headers: Prepare for new header dependencies before moving code to ↵Ingo Molnar2-0/+2
<linux/sched/task_stack.h> We are going to split <linux/sched/task_stack.h> out of <linux/sched.h>, which will have to be picked up from other headers and a couple of .c files. Create a trivial placeholder <linux/sched/task_stack.h> file that just maps to <linux/sched.h> to make this patch obviously correct and bisectable. Include the new header in the files that are going to need it. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-03-02sched/headers: Prepare for new header dependencies before moving code to ↵Ingo Molnar1-0/+1
<linux/sched/task.h> We are going to split <linux/sched/task.h> out of <linux/sched.h>, which will have to be picked up from other headers and a couple of .c files. Create a trivial placeholder <linux/sched/task.h> file that just maps to <linux/sched.h> to make this patch obviously correct and bisectable. Include the new header in the files that are going to need it. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-03-02sched/headers: Prepare for new header dependencies before moving code to ↵Ingo Molnar1-0/+1
<linux/sched/debug.h> We are going to split <linux/sched/debug.h> out of <linux/sched.h>, which will have to be picked up from other headers and a couple of .c files. Create a trivial placeholder <linux/sched/debug.h> file that just maps to <linux/sched.h> to make this patch obviously correct and bisectable. Include the new header in the files that are going to need it. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-03-02sched/headers: Prepare for new header dependencies before moving code to ↵Ingo Molnar1-1/+1
<linux/sched/signal.h> We are going to split <linux/sched/signal.h> out of <linux/sched.h>, which will have to be picked up from other headers and a couple of .c files. Create a trivial placeholder <linux/sched/signal.h> file that just maps to <linux/sched.h> to make this patch obviously correct and bisectable. Include the new header in the files that are going to need it. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-02-27mm: add new mmgrab() helperVegard Nossum1-1/+1
Apart from adding the helper function itself, the rest of the kernel is converted mechanically using: git grep -l 'atomic_inc.*mm_count' | xargs sed -i 's/atomic_inc(&\(.*\)->mm_count);/mmgrab\(\1\);/' git grep -l 'atomic_inc.*mm_count' | xargs sed -i 's/atomic_inc(&\(.*\)\.mm_count);/mmgrab\(\&\1\);/' This is needed for a later patch that hooks into the helper, but might be a worthwhile cleanup on its own. (Michal Hocko provided most of the kerneldoc comment.) Link: http://lkml.kernel.org/r/20161218123229.22952-1-vegard.nossum@oracle.com Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-27kprobes: move kprobe declarations to asm-generic/kprobes.hLuis R. Rodriguez1-0/+1
Often all is needed is these small helpers, instead of compiler.h or a full kprobes.h. This is important for asm helpers, in fact even some asm/kprobes.h make use of these helpers... instead just keep a generic asm file with helpers useful for asm code with the least amount of clutter as possible. Likewise we need now to also address what to do about this file for both when architectures have CONFIG_HAVE_KPROBES, and when they do not. Then for when architectures have CONFIG_HAVE_KPROBES but have disabled CONFIG_KPROBES. Right now most asm/kprobes.h do not have guards against CONFIG_KPROBES, this means most architecture code cannot include asm/kprobes.h safely. Correct this and add guards for architectures missing them. Additionally provide architectures that not have kprobes support with the default asm-generic solution. This lets us force asm/kprobes.h on the header include/linux/kprobes.h always, but most importantly we can now safely include just asm/kprobes.h on architecture code without bringing the full kitchen sink of header files. Two architectures already provided a guard against CONFIG_KPROBES on its kprobes.h: sh, arch. The rest of the architectures needed gaurds added. We avoid including any not-needed headers on asm/kprobes.h unless kprobes have been enabled. In a subsequent atomic change we can try now to remove compiler.h from include/linux/kprobes.h. During this sweep I've also identified a few architectures defining a common macro needed for both kprobes and ftrace, that of the definition of the breakput instruction up. Some refer to this as BREAKPOINT_INSTRUCTION. This must be kept outside of the #ifdef CONFIG_KPROBES guard. [mcgrof@kernel.org: fix arm64 build] Link: http://lkml.kernel.org/r/CAB=NE6X1WMByuARS4mZ1g9+W=LuVBnMDnh_5zyN0CLADaVh=Jw@mail.gmail.com [sfr@canb.auug.org.au: fixup for kprobes declarations moving] Link: http://lkml.kernel.org/r/20170214165933.13ebd4f4@canb.auug.org.au Link: http://lkml.kernel.org/r/20170203233139.32682-1-mcgrof@kernel.org Signed-off-by: Luis R. Rodriguez <mcgrof@kernel.org> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: David S. Miller <davem@davemloft.net> Cc: Ingo Molnar <mingo@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-22score: remove asm/current.hDavidlohr Bueso2-7/+1
... it's already using the generic version anyways, so just drop the file as do the other archs that do not implement their own version of the current macro. Link: http://lkml.kernel.org/r/1485992878-4780-5-git-send-email-dave@stgolabs.net Signed-off-by: Davidlohr Bueso <dbueso@suse.de> Cc: Chen Liqin <liqin.linux@gmail.com> Cc: Lennox Wu <lennox.wu@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-21Merge tag 'extable-for-linus' of ↵Linus Torvalds3-3/+3
git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux Pull exception table module split from Paul Gortmaker: "Final extable.h related changes. This completes the separation of exception table content from the module.h header file. This is achieved with the final commit that removes the one line back compatible change that sourced extable.h into the module.h file. The commits are unchanged since January, with the exception of a couple Acks that came in for the last two commits a bit later. The changes have been in linux-next for quite some time[1] and have got widespread arch coverage via toolchains I have and also from additional ones the kbuild bot has. Maintaners of the various arch were Cc'd during the postings to lkml[2] and informed that the intention was to take the remaining arch specific changes and lump them together with the final two non-arch specific changes and submit for this merge window. The ia64 diffstat stands out and probably warrants a mention. In an earlier review, Al Viro made a valid comment that the original header separation of content left something to be desired, and that it get fixed as a part of this change, hence the larger diffstat" * tag 'extable-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux: (21 commits) module.h: remove extable.h include now users have migrated core: migrate exception table users off module.h and onto extable.h cris: migrate exception table users off module.h and onto extable.h hexagon: migrate exception table users off module.h and onto extable.h microblaze: migrate exception table users off module.h and onto extable.h unicore32: migrate exception table users off module.h and onto extable.h score: migrate exception table users off module.h and onto extable.h metag: migrate exception table users off module.h and onto extable.h arc: migrate exception table users off module.h and onto extable.h nios2: migrate exception table users off module.h and onto extable.h sparc: migrate exception table users onto extable.h openrisc: migrate exception table users off module.h and onto extable.h frv: migrate exception table users off module.h and onto extable.h sh: migrate exception table users off module.h and onto extable.h xtensa: migrate exception table users off module.h and onto extable.h mn10300: migrate exception table users off module.h and onto extable.h alpha: migrate exception table users off module.h and onto extable.h arm: migrate exception table users off module.h and onto extable.h m32r: migrate exception table users off module.h and onto extable.h ia64: ensure exception table search users include extable.h ...
2017-02-01sched/cputime: Remove generic asm headersFrederic Weisbecker1-1/+0
cputime_t is now only used by two architectures: * powerpc (when CONFIG_VIRT_CPU_ACCOUNTING_NATIVE=y) * s390 And since the core doesn't use it anymore, we don't need any arch support from the others. So we can remove their stub implementations. A final cleanup would be to provide an efficient pure arch implementation of cputime_to_nsec() for s390 and powerpc and finally remove include/linux/cputime.h . Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: Stanislaw Gruszka <sgruszka@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Wanpeng Li <wanpeng.li@hotmail.com> Link: http://lkml.kernel.org/r/1485832191-26889-36-git-send-email-fweisbec@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-01-26score: migrate exception table users off module.h and onto extable.hPaul Gortmaker3-3/+3
These files were only including module.h for exception table related functions. We've now separated that content out into its own file "extable.h" so now move over to that and avoid all the extra header content in module.h that we don't really need to compile these files. Cc: Chen Liqin <liqin.linux@gmail.com> Cc: Lennox Wu <lennox.wu@gmail.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2016-12-24Replace <asm/uaccess.h> with <linux/uaccess.h> globallyLinus Torvalds4-4/+4
This was entirely automated, using the script by Al: PATT='^[[:blank:]]*#[[:blank:]]*include[[:blank:]]*<asm/uaccess.h>' sed -i -e "s!$PATT!#include <linux/uaccess.h>!" \ $(git grep -l "$PATT"|grep -v ^include/linux/uaccess.h) to do the replacement at the end of the merge window. Requested-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-11-17locking/core: Provide common cpu_relax_yield() definitionChristian Borntraeger1-1/+0
No need to duplicate the same define everywhere. Since the only user is stop-machine and the only provider is s390, we can use a default implementation of cpu_relax_yield() in sched.h. Suggested-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: David Hildenbrand <david@redhat.com> Acked-by: Russell King <rmk+kernel@armlinux.org.uk> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Noam Camus <noamc@ezchip.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will.deacon@arm.com> Cc: kvm@vger.kernel.org Cc: linux-arch@vger.kernel.org Cc: linux-s390 <linux-s390@vger.kernel.org> Cc: linuxppc-dev@lists.ozlabs.org Cc: sparclinux@vger.kernel.org Cc: virtualization@lists.linux-foundation.org Cc: xen-devel@lists.xenproject.org Link: http://lkml.kernel.org/r/1479298985-191589-1-git-send-email-borntraeger@de.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-11-16locking/core, arch: Remove cpu_relax_lowlatency()Christian Borntraeger1-1/+0
As there are no users left, we can remove cpu_relax_lowlatency() implementations from every architecture. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Noam Camus <noamc@ezchip.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will.deacon@arm.com> Cc: linuxppc-dev@lists.ozlabs.org Cc: virtualization@lists.linux-foundation.org Cc: xen-devel@lists.xenproject.org Cc: <linux-arch@vger.kernel.org> Link: http://lkml.kernel.org/r/1477386195-32736-6-git-send-email-borntraeger@de.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-11-16locking/core: Introduce cpu_relax_yield()Christian Borntraeger1-0/+1
For spinning loops people do often use barrier() or cpu_relax(). For most architectures cpu_relax and barrier are the same, but on some architectures cpu_relax can add some latency. For example on power,sparc64 and arc, cpu_relax can shift the CPU towards other hardware threads in an SMT environment. On s390 cpu_relax does even more, it uses an hypercall to the hypervisor to give up the timeslice. In contrast to the SMT yielding this can result in larger latencies. In some places this latency is unwanted, so another variant "cpu_relax_lowlatency" was introduced. Before this is used in more and more places, lets revert the logic and provide a cpu_relax_yield that can be called in places where yielding is more important than latency. By default this is the same as cpu_relax on all architectures. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Noam Camus <noamc@ezchip.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will.deacon@arm.com> Cc: linuxppc-dev@lists.ozlabs.org Cc: virtualization@lists.linux-foundation.org Cc: xen-devel@lists.xenproject.org Link: http://lkml.kernel.org/r/1477386195-32736-2-git-send-email-borntraeger@de.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-10-25locking/mutex: Kill arch specific codePeter Zijlstra1-6/+0
Its all generic atomic_long_t stuff now. Tested-by: Jason Low <jason.low2@hpe.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-arch@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-10-19Merge branch 'gup_flag-cleanups'Linus Torvalds1-4/+6
Merge the gup_flags cleanups from Lorenzo Stoakes: "This patch series adjusts functions in the get_user_pages* family such that desired FOLL_* flags are passed as an argument rather than implied by flags. The purpose of this change is to make the use of FOLL_FORCE explicit so it is easier to grep for and clearer to callers that this flag is being used. The use of FOLL_FORCE is an issue as it overrides missing VM_READ/VM_WRITE flags for the VMA whose pages we are reading from/writing to, which can result in surprising behaviour. The patch series came out of the discussion around commit 38e088546522 ("mm: check VMA flags to avoid invalid PROT_NONE NUMA balancing"), which addressed a BUG_ON() being triggered when a page was faulted in with PROT_NONE set but having been overridden by FOLL_FORCE. do_numa_page() was run on the assumption the page _must_ be one marked for NUMA node migration as an actual PROT_NONE page would have been dealt with prior to this code path, however FOLL_FORCE introduced a situation where this assumption did not hold. See https://marc.info/?l=linux-mm&m=147585445805166 for the patch proposal" Additionally, there's a fix for an ancient bug related to FOLL_FORCE and FOLL_WRITE by me. [ This branch was rebased recently to add a few more acked-by's and reviewed-by's ] * gup_flag-cleanups: mm: replace access_process_vm() write parameter with gup_flags mm: replace access_remote_vm() write parameter with gup_flags mm: replace __access_remote_vm() write parameter with gup_flags mm: replace get_user_pages_remote() write/force parameters with gup_flags mm: replace get_user_pages() write/force parameters with gup_flags mm: replace get_vaddr_frames() write/force parameters with gup_flags mm: replace get_user_pages_locked() write/force parameters with gup_flags mm: replace get_user_pages_unlocked() write/force parameters with gup_flags mm: remove write/force parameters from __get_user_pages_unlocked() mm: remove write/force parameters from __get_user_pages_locked() mm: remove gup_flags FOLL_WRITE games from __get_user_pages()
2016-10-19mm: replace access_process_vm() write parameter with gup_flagsLorenzo Stoakes1-4/+6
This removes the 'write' argument from access_process_vm() and replaces it with 'gup_flags' as use of this function previously silently implied FOLL_FORCE, whereas after this patch callers explicitly pass this flag. We make this explicit as use of FOLL_FORCE can result in surprising behaviour (and hence bugs) within the mm subsystem. Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com> Acked-by: Jesper Nilsson <jesper.nilsson@axis.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-14Merge branch 'for-linus' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull more misc uaccess and vfs updates from Al Viro: "The rest of the stuff from -next (more uaccess work) + assorted fixes" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: score: traps: Add missing include file to fix build error fs/super.c: don't fool lockdep in freeze_super() and thaw_super() paths fs/super.c: fix race between freeze_super() and thaw_super() overlayfs: Fix setting IOP_XATTR flag iov_iter: kernel-doc import_iovec() and rw_copy_check_uvector() blackfin: no access_ok() for __copy_{to,from}_user() arm64: don't zero in __copy_from_user{,_inatomic} arm: don't zero in __copy_from_user_inatomic()/__copy_from_user() arc: don't leak bits of kernel stack into coredump alpha: get rid of tail-zeroing in __copy_user()
2016-10-14score: traps: Add missing include file to fix build errorGuenter Roeck1-0/+1
score images fail to build as follows. arch/score/kernel/traps.c: In function 'show_stack': arch/score/kernel/traps.c:55:3: error: implicit declaration of function '__get_user' __get_user() is declared in asm/uaccess.h, which was previously included through asm/module.h. Cc: Al Viro <viro@zeniv.linux.org.uk> Fixes: 88dd4a748da7 ("score: separate extable.h, switch module.h to it") Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>