summaryrefslogtreecommitdiffstats
path: root/arch/s390/pci
AgeCommit message (Collapse)AuthorFilesLines
2020-08-03Merge tag 's390-5.9-1' of ↵Linus Torvalds1-8/+12
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 updates from Heiko Carstens: - Add support for function error injection. - Add support for custom exception handlers, as required by BPF_PROBE_MEM. - Add support for BPF_PROBE_MEM. - Add trace events for idle enter / exit for the s390 specific idle implementation. - Remove unused zcore memmmap device. - Remove unused "raw view" from s390 debug feature. - AP bus + zcrypt device driver code refactoring. - Provide cex4 cca sysfs attributes for cex3 for zcrypt device driver. - Expose only minimal interface to walk physmem for mm/memblock. This is a common code change and it has been agreed on with Mike Rapoport and Andrew Morton that this can go upstream via the s390 tree. - Rework of the s390 vmem/vmmemap code to allow for future memory hot remove. - Get rid of FORCE_MAX_ZONEORDER to finally allow for order-10 allocations again, instead of only order-8 allocations. - Various small improvements and fixes. * tag 's390-5.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (48 commits) s390/vmemmap: coding style updates s390/vmemmap: avoid memset(PAGE_UNUSED) when adding consecutive sections s390/vmemmap: remember unused sub-pmd ranges s390/vmemmap: fallback to PTEs if mapping large PMD fails s390/vmem: cleanup empty page tables s390/vmemmap: take the vmem_mutex when populating/freeing s390/vmemmap: cleanup when vmemmap_populate() fails s390/vmemmap: extend modify_pagetable() to handle vmemmap s390/vmem: consolidate vmem_add_range() and vmem_remove_range() s390/vmem: rename vmem_add_mem() to vmem_add_range() s390: enable HAVE_FUNCTION_ERROR_INJECTION s390/pci: clarify comment in s390_mmio_read/write s390/time: improve comparison for tod steering s390/time: select CLOCKSOURCE_VALIDATE_LAST_CYCLE s390/time: use CLOCKSOURCE_MASK s390/bpf: implement BPF_PROBE_MEM s390/kernel: expand exception table logic to allow new handling options s390/kernel: unify EX_TABLE* implementations s390/mm: allow order 10 allocations s390/mm: avoid trimming to MAX_ORDER ...
2020-07-27s390/pci: clarify comment in s390_mmio_read/writeNiklas Schnelle1-8/+12
The existing comment was talking about reading in the write part and vice versa. While we are here make it more clear why restricting the syscalls to MIO capable devices is okay. Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2020-06-29s390/pci: fix enabling a reserved PCI functionNiklas Schnelle1-1/+12
In usual IPL or hot plug scenarios a zPCI function transitions directly from reserved (invisible to Linux) to configured state or is configured by Linux itself using an SCLP, however it can also first go from reserved to standby and then from standby to configured without Linux initiative. In this scenario we first get a PEC event 0x302 and then 0x301. This may happen for example when the device is deconfigured at another LPAR and made available for this LPAR. It may also happen under z/VM when a device is attached while in some inconsistent state. However when we get the 0x301 the device is already known to zPCI so calling zpci_create() will add it twice resulting in the below BUG. Instead we should only enable the existing device and finally scan it through the PCI subsystem. list_add double add: new=00000000ed5a9008, prev=00000000ed5a9008, next=0000000083502300. kernel BUG at lib/list_debug.c:31! Krnl PSW : 0704c00180000000 0000000082dc2db8 (__list_add_valid+0x70/0xa8) Call Trace: [<0000000082dc2db8>] __list_add_valid+0x70/0xa8 ([<0000000082dc2db4>] __list_add_valid+0x6c/0xa8) [<00000000828ea920>] zpci_create_device+0x60/0x1b0 [<00000000828ef04a>] zpci_event_availability+0x282/0x2f0 [<000000008315f848>] chsc_process_crw+0x2b8/0xa18 [<000000008316735c>] crw_collect_info+0x254/0x348 [<00000000829226ea>] kthread+0x14a/0x168 [<000000008319d5c0>] ret_from_fork+0x24/0x2c Fixes: f606b3ef47c9 ("s390/pci: adapt events for zbus") Reported-by: Alexander Egorenkov <egorenar@linux.ibm.com> Tested-by: Alexander Egorenkov <egorenar@linux.ibm.com> Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2020-06-09mmap locking API: use coccinelle to convert mmap_sem rwsem call sitesMichel Lespinasse1-2/+2
This change converts the existing mmap_sem rwsem calls to use the new mmap locking API instead. The change is generated using coccinelle with the following rule: // spatch --sp-file mmap_lock_api.cocci --in-place --include-headers --dir . @@ expression mm; @@ ( -init_rwsem +mmap_init_lock | -down_write +mmap_write_lock | -down_write_killable +mmap_write_lock_killable | -down_write_trylock +mmap_write_trylock | -up_write +mmap_write_unlock | -downgrade_write +mmap_write_downgrade | -down_read +mmap_read_lock | -down_read_killable +mmap_read_lock_killable | -down_read_trylock +mmap_read_trylock | -up_read +mmap_read_unlock ) -(&mm->mmap_sem) +(mm) Signed-off-by: Michel Lespinasse <walken@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Daniel Jordan <daniel.m.jordan@oracle.com> Reviewed-by: Laurent Dufour <ldufour@linux.ibm.com> Reviewed-by: Vlastimil Babka <vbabka@suse.cz> Cc: Davidlohr Bueso <dbueso@suse.de> Cc: David Rientjes <rientjes@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jerome Glisse <jglisse@redhat.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Liam Howlett <Liam.Howlett@oracle.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ying Han <yinghan@google.com> Link: http://lkml.kernel.org/r/20200520052908.204642-5-walken@google.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-08Merge tag 's390-5.8-1' of ↵Linus Torvalds7-155/+483
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 updates from Vasily Gorbik: - Add support for multi-function devices in pci code. - Enable PF-VF linking for architectures using the pdev->no_vf_scan flag (currently just s390). - Add reipl from NVMe support. - Get rid of critical section cleanup in entry.S. - Refactor PNSO CHSC (perform network subchannel operation) in cio and qeth. - QDIO interrupts and error handling fixes and improvements, more refactoring changes. - Align ioremap() with generic code. - Accept requests without the prefetch bit set in vfio-ccw. - Enable path handling via two new regions in vfio-ccw. - Other small fixes and improvements all over the code. * tag 's390-5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (52 commits) vfio-ccw: make vfio_ccw_regops variables declarations static vfio-ccw: Add trace for CRW event vfio-ccw: Wire up the CRW irq and CRW region vfio-ccw: Introduce a new CRW region vfio-ccw: Refactor IRQ handlers vfio-ccw: Introduce a new schib region vfio-ccw: Refactor the unregister of the async regions vfio-ccw: Register a chp_event callback for vfio-ccw vfio-ccw: Introduce new helper functions to free/destroy regions vfio-ccw: document possible errors vfio-ccw: Enable transparent CCW IPL from DASD s390/pci: Log new handle in clp_disable_fh() s390/cio, s390/qeth: cleanup PNSO CHSC s390/qdio: remove q->first_to_kick s390/qdio: fix up qdio_start_irq() kerneldoc s390: remove critical section cleanup from entry.S s390: add machine check SIGP s390/pci: ioremap() align with generic code s390/ap: introduce new ap function ap_get_qdev() Documentation/s390: Update / remove developerWorks web links ...
2020-05-28s390/pci: Log new handle in clp_disable_fh()Petr Tesarik1-2/+1
After disabling a function, the original handle is logged instead of the disabled handle. Link: https://lkml.kernel.org/r/20200522183922.5253-1-ptesarik@suse.com Fixes: 17cdec960cf7 ("s390/pci: Recover handle in clp_set_pci_fn()") Reviewed-by: Pierre Morel <pmorel@linux.ibm.com> Signed-off-by: Petr Tesarik <ptesarik@suse.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-05-20s390/pci: ioremap() align with generic codeNiklas Schnelle1-10/+11
Let's use the same signature and parameter names as in the generic ioremap() definition making the physical address' type explicit. Add a check against address wrap around as in the generic lib/ioremap.c:ioremap_prot() code. Finally use free_vm_area() instead of vunmap() as in the generic code. Besides being clearer free_vm_area() can also skip a few additional checks compared with vunmap(). Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com> Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-05-20s390/pci: create links between PFs and VFsNiklas Schnelle2-2/+71
On s390 PCI Virtual Functions (VFs) are scanned by firmware and are made available to Linux via the hot-plug interface. As such the common code path of doing the scan directly using the parent Physical Function (PF) is not used and fenced off with the no_vf_scan attribute. Even if the partition created the VFs itself e.g. using the sriov_numvfs attribute of a PF, the PF/VF links thus need to be established after the fact. To do this when a VF is plugged we scan through all functions on the same zbus and test whether they are the parent PF in which case we establish the necessary links. With these links established there is now no more need to fence off pci_iov_remove_virtfn() for pdev->no_vf_scan as the common code now works fine. Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Pierre Morel <pmorel@linux.ibm.com> Link: https://lore.kernel.org/r/20200506154139.90609-3-schnelle@linux.ibm.com Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-05-14s390/pci: Fix s390_mmio_read/write with MIONiklas Schnelle1-2/+211
The s390_mmio_read/write syscalls are currently broken when running with MIO. The new pcistb_mio/pcstg_mio/pcilg_mio instructions are executed similiarly to normal load/store instructions and do address translation in the current address space. That means inside the kernel they are aware of mappings into kernel address space while outside the kernel they use user space mappings (usually created through mmap'ing a PCI device file). Now when existing user space applications use the s390_pci_mmio_write and s390_pci_mmio_read syscalls, they pass I/O addresses that are mapped into user space so as to be usable with the new instructions without needing a syscall. Accessing these addresses with the old instructions as done currently leads to a kernel panic. Also, for such a user space mapping there may not exist an equivalent kernel space mapping which means we can't just use the new instructions in kernel space. Instead of replicating user mappings in the kernel which then might collide with other mappings, we can conceptually execute the new instructions as if executed by the user space application using the secondary address space. This even allows us to directly store to the user pointer without the need for copy_to/from_user(). Cc: stable@vger.kernel.org Fixes: 71ba41c9b1d9 ("s390/pci: provide support for MIO instructions") Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com> Reviewed-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-05-06s390/pci: removes wrong PCI multifunction assignmentPierre Morel1-3/+1
The assignment of the PCI device multifunction attribute is set during the PCI device probe. There is no need to set it here. Let's do it right and remove this assignment. Signed-off-by: Pierre Morel <pmorel@linux.ibm.com> Reviewed-by: Niklas Schnelle <schnelle@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-04-28s390/pci: Handling multifunctionsPierre Morel4-45/+151
We allow multiple functions on a single bus. We suppress the ZPCI_DEVFN definition and replace its occurences with zpci->devfn. We verify the number of device during the registration. There can never be more domains in use than existing devices, so we do not need to verify the count of domain after having verified the count of devices. Signed-off-by: Pierre Morel <pmorel@linux.ibm.com> Reviewed-by: Niklas Schnelle <schnelle@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-04-28s390/pci: Adding bus resourcePierre Morel1-0/+5
The current PCI implementation do not provide a bus resource. This leads to a notice being print at boot. Let's do it more nicely and provide the bus resource. Signed-off-by: Pierre Morel <pmorel@linux.ibm.com> Reviewed-by: Niklas Schnelle <schnelle@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-04-28s390/pci: adapt events for zbusPierre Morel1-16/+8
Simplify the event handling. Set the zpci state explicitly. Signed-off-by: Pierre Morel <pmorel@linux.ibm.com> Reviewed-by: Niklas Schnelle <schnelle@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-04-28s390/pci: create zPCI busPierre Morel6-111/+257
The zPCI bus is in charge to handle common zPCI resources for zPCI devices. Creating the zPCI bus, the PCI bus, the zPCI devices and the PCI devices and hotplug slots done in a specific order: - PCI hotplug slot creation needs a PCI bus - PCI bus needs a PCI domain which is reported by the pci_domain_nr() when setting up the host bridge - PCI domain is set from the zPCI with devfn 0 this is necessary to have a reproducible enumeration Therefore we can not create devices or hotplug slots for any PCI device associated with a zPCI device before having discovered the function zero of the bus. The discovery and initialization of devices can be done at several points in the code: - On Events, serialized in a thread context - On initialization, in the kernel init thread context - When powering on the hotplug slot, in a user thread context The removal of devices and their parent bus may also be done on events or for devices when powering down the slot. To guarantee the existence of the bus and devices until they are no more needed we use kref in zPCI bus and introduce a reference count in the zPCI devices. In this patch the zPCI bus still only accept a device with a devfn 0. Signed-off-by: Pierre Morel <pmorel@linux.ibm.com> Reviewed-by: Niklas Schnelle <schnelle@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-04-28s390/pci: define RID and RID availablePierre Morel1-0/+3
Firmware provides the bus/devfn part of the PCI addresses of a zPCI function inside the new field RID of the CLP query PCI function with a bit to know if this field is available to use. Let's add these fields to the clp_rsp_query_pci structure, add corresponding fields to zdev and initialize them. Signed-off-by: Pierre Morel <pmorel@linux.ibm.com> Reviewed-by: Niklas Schnelle <schnelle@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-04-28s390/pci: define kernel parameters for PCI multifunctionPierre Morel1-0/+6
Using PCI multifunctions in S390 is a new feature we may want to ignore to continue provide the same topology as in the past to userland even if the configuration supports exposing the topology of a multi-Function device. A new boolean parameters allows to overwrite the kernel pci configuration: - pci=norid when on, disallow the use a new firmware field, RID, which provides the PCI <bus>:<device>.<function> part of the PCI address. To be used in the following patches and satisfy the checkpatch.pl the variable is exposed in pci.h Signed-off-by: Pierre Morel <pmorel@linux.ibm.com> Reviewed-by: Niklas Schnelle <schnelle@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-04-28s390/pci: Expose new port attribute for PCIe functionsAlexander Schmidt2-0/+3
Add SysFS attribute that provides the port number for PCI functions representing a single port of a multi-port device. Signed-off-by: Alexander Schmidt <alexs@linux.ibm.com> Signed-off-by: Pierre Morel <pmorel@linux.ibm.com> Reviewed-by: Niklas Schnelle <schnelle@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-04-22s390/pci: do not set affinity for floating irqsNiklas Schnelle1-2/+3
with the introduction of CPU directed interrupts the kernel parameter pci=force_floating was introduced to fall back to the previous behavior using floating irqs. However we were still setting the affinity in that case, both in __irq_alloc_descs() and via the irq_set_affinity callback in struct irq_chip. For the former only set the affinity in the directed case. The latter is explicitly set in zpci_directed_irq_init() so we can just leave it unset for the floating case. Fixes: e979ce7bced2 ("s390/pci: provide support for CPU directed interrupts") Co-developed-by: Alexander Schmidt <alexs@linux.ibm.com> Signed-off-by: Alexander Schmidt <alexs@linux.ibm.com> Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-04-04Merge tag 's390-5.7-1' of ↵Linus Torvalds2-59/+26
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 updates from Vasily Gorbik: - Update maintainers. Niklas Schnelle takes over zpci and Vineeth Vijayan common io code. - Extend cpuinfo to include topology information. - Add new extended counters for IBM z15 and sampling buffer allocation rework in perf code. - Add control over zeroing out memory during system restart. - CCA protected key block version 2 support and other fixes/improvements in crypto code. - Convert to new fallthrough; annotations. - Replace zero-length arrays with flexible-arrays. - QDIO debugfs and other small improvements. - Drop 2-level paging support optimization for compat tasks. Varios mm cleanups. - Remove broken and unused hibernate / power management support. - Remove fake numa support which does not bring any benefits. - Exclude offline CPUs from CPU topology masks to be more consistent with other architectures. - Prevent last branching instruction address leaking to userspace. - Other small various fixes and improvements all over the code. * tag 's390-5.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (57 commits) s390/mm: cleanup init_new_context() callback s390/mm: cleanup virtual memory constants usage s390/mm: remove page table downgrade support s390/qdio: set qdio_irq->cdev at allocation time s390/qdio: remove unused function declarations s390/ccwgroup: remove pm support s390/ap: remove power management code from ap bus and drivers s390/zcrypt: use kvmalloc instead of kmalloc for 256k alloc s390/mm: cleanup arch_get_unmapped_area() and friends s390/ism: remove pm support s390/cio: use fallthrough; s390/vfio: use fallthrough; s390/zcrypt: use fallthrough; s390: use fallthrough; s390/cpum_sf: Fix wrong page count in error message s390/diag: fix display of diagnose call statistics s390/ap: Remove ap device suspend and resume callbacks s390/pci: Improve handling of unset UID s390/pci: Fix zpci_alloc_domain() over allocation s390/qdio: pass ISC as parameter to chsc_sadc() ...
2020-03-23s390/pci: Improve handling of unset UIDNiklas Schnelle2-1/+9
When UID checking is enabled a UID value of 0 is invalid and can not be set by the user. On z/VM it is however used to indicate an unset UID. Until now, this lead to the behavior that one PCI function could be attached with UID 0 after which z/VM would prohibit further attachment. Now if the user then turns off UID checking in z/VM the user could seemingly attach additional PCI functions that would however not show up in Linux as that would not be informed of the change in UID checking mode. This is unexpected and confusing and lead to bug reports against Linux. Instead now, if we encounter an unset UID value of 0 treat it as indicating that UID checking was turned off, switch to automatic domain allocation, and warn the user of the possible misconfiguration. Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com> Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-03-23s390/pci: Fix zpci_alloc_domain() over allocationNiklas Schnelle1-16/+18
Until now zpci_alloc_domain() only prevented more than CONFIG_PCI_NR_FUNCTIONS from being added when using automatic domain allocation. When explicit UIDs were defined UIDs above CONFIG_PCI_NR_FUNCTIONS were not counted at all. When more PCI functions are added this could lead to various errors including under sized IRQ vectors and similar issues. Fix this by explicitly tracking the number of allocated domains. Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com> Reviewed-by: Pierre Morel <pmorel@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-03-23s390: remove broken hibernate / power management supportHeiko Carstens1-43/+0
Hibernation is known to be broken for many years on s390. Given that there aren't any real use cases, remove the code instead of spending time to fix and maintain it. Without hibernate support it doesn't make too much sense to keep power management support; therefore remove it completely. Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Peter Oberparleiter <oberpar@linux.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-03-04s390/pci: Fix unexpected write combine on resourceNiklas Schnelle1-2/+2
In the initial MIO support introduced in commit 71ba41c9b1d9 ("s390/pci: provide support for MIO instructions") zpci_map_resource() and zpci_setup_resources() default to using the mio_wb address as the resource's start address. This means users of the mapping, which includes most drivers, will get write combining on PCI Stores. This may lead to problems when drivers expect write through behavior when not using an explicit ioremap_wc(). Cc: stable@vger.kernel.org Fixes: 71ba41c9b1d9 ("s390/pci: provide support for MIO instructions") Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com> Reviewed-by: Pierre Morel <pmorel@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-01-22s390/pci: Fix possible deadlock in recover_store()Niklas Schnelle1-21/+42
With zpci_disable() working, lockdep detected a potential deadlock (lockdep output at the end). The deadlock is between recovering a PCI function via the /sys/bus/pci/devices/<dev>/recover attribute vs powering it off via /sys/bus/pci/slots/<slot>/power. The fix is analogous to the changes in commit 0ee223b2e1f6 ("scsi: core: Avoid that SCSI device removal through sysfs triggers a deadlock") that fixed a potential deadlock on removing a SCSI device via sysfs. [ 204.830107] ====================================================== [ 204.830109] WARNING: possible circular locking dependency detected [ 204.830111] 5.5.0-rc2-06072-gbc03ecc9a672 #6 Tainted: G W [ 204.830112] ------------------------------------------------------ [ 204.830113] bash/1034 is trying to acquire lock: [ 204.830115] 0000000192a1a610 (kn->count#200){++++}, at: kernfs_remove_by_name_ns+0x5c/0xa8 [ 204.830122] but task is already holding lock: [ 204.830123] 00000000c16134a8 (pci_rescan_remove_lock){+.+.}, at: pci_stop_and_remove_bus_device_locked+0x26/0x48 [ 204.830128] which lock already depends on the new lock. [ 204.830129] the existing dependency chain (in reverse order) is: [ 204.830130] -> #1 (pci_rescan_remove_lock){+.+.}: [ 204.830134] validate_chain+0x93a/0xd08 [ 204.830136] __lock_acquire+0x4ae/0x9d0 [ 204.830137] lock_acquire+0x114/0x280 [ 204.830140] __mutex_lock+0xa2/0x960 [ 204.830142] mutex_lock_nested+0x32/0x40 [ 204.830145] recover_store+0x4c/0xa8 [ 204.830147] kernfs_fop_write+0xe6/0x218 [ 204.830151] vfs_write+0xb0/0x1b8 [ 204.830152] ksys_write+0x6c/0xf8 [ 204.830154] system_call+0xd8/0x2d8 [ 204.830155] -> #0 (kn->count#200){++++}: [ 204.830187] check_noncircular+0x1e6/0x240 [ 204.830189] check_prev_add+0xfc/0xdb0 [ 204.830190] validate_chain+0x93a/0xd08 [ 204.830192] __lock_acquire+0x4ae/0x9d0 [ 204.830193] lock_acquire+0x114/0x280 [ 204.830194] __kernfs_remove.part.0+0x2e4/0x360 [ 204.830196] kernfs_remove_by_name_ns+0x5c/0xa8 [ 204.830198] remove_files.isra.0+0x4c/0x98 [ 204.830199] sysfs_remove_group+0x66/0xc8 [ 204.830201] sysfs_remove_groups+0x46/0x68 [ 204.830204] device_remove_attrs+0x52/0x90 [ 204.830207] device_del+0x182/0x418 [ 204.830208] pci_remove_bus_device+0x8a/0x130 [ 204.830210] pci_stop_and_remove_bus_device_locked+0x3a/0x48 [ 204.830212] disable_slot+0x68/0x100 [ 204.830213] power_write_file+0x7c/0x130 [ 204.830215] kernfs_fop_write+0xe6/0x218 [ 204.830217] vfs_write+0xb0/0x1b8 [ 204.830218] ksys_write+0x6c/0xf8 [ 204.830220] system_call+0xd8/0x2d8 [ 204.830221] other info that might help us debug this: [ 204.830223] Possible unsafe locking scenario: [ 204.830224] CPU0 CPU1 [ 204.830225] ---- ---- [ 204.830226] lock(pci_rescan_remove_lock); [ 204.830227] lock(kn->count#200); [ 204.830229] lock(pci_rescan_remove_lock); [ 204.830231] lock(kn->count#200); [ 204.830233] *** DEADLOCK *** [ 204.830234] 4 locks held by bash/1034: [ 204.830235] #0: 00000001b6fbc498 (sb_writers#4){.+.+}, at: vfs_write+0x158/0x1b8 [ 204.830239] #1: 000000018c9f5090 (&of->mutex){+.+.}, at: kernfs_fop_write+0xaa/0x218 [ 204.830242] #2: 00000001f7da0810 (kn->count#235){.+.+}, at: kernfs_fop_write+0xb6/0x218 [ 204.830245] #3: 00000000c16134a8 (pci_rescan_remove_lock){+.+.}, at: pci_stop_and_remove_bus_device_locked+0x26/0x48 [ 204.830248] stack backtrace: [ 204.830250] CPU: 2 PID: 1034 Comm: bash Tainted: G W 5.5.0-rc2-06072-gbc03ecc9a672 #6 [ 204.830252] Hardware name: IBM 8561 T01 703 (LPAR) [ 204.830253] Call Trace: [ 204.830257] [<00000000c05e10c0>] show_stack+0x88/0xf0 [ 204.830260] [<00000000c112dca4>] dump_stack+0xa4/0xe0 [ 204.830261] [<00000000c0694c06>] check_noncircular+0x1e6/0x240 [ 204.830263] [<00000000c0695bec>] check_prev_add+0xfc/0xdb0 [ 204.830264] [<00000000c06971da>] validate_chain+0x93a/0xd08 [ 204.830266] [<00000000c06994c6>] __lock_acquire+0x4ae/0x9d0 [ 204.830267] [<00000000c069867c>] lock_acquire+0x114/0x280 [ 204.830269] [<00000000c09ca15c>] __kernfs_remove.part.0+0x2e4/0x360 [ 204.830270] [<00000000c09cb5c4>] kernfs_remove_by_name_ns+0x5c/0xa8 [ 204.830272] [<00000000c09cee14>] remove_files.isra.0+0x4c/0x98 [ 204.830274] [<00000000c09cf2ae>] sysfs_remove_group+0x66/0xc8 [ 204.830276] [<00000000c09cf356>] sysfs_remove_groups+0x46/0x68 [ 204.830278] [<00000000c0e3dfe2>] device_remove_attrs+0x52/0x90 [ 204.830280] [<00000000c0e40382>] device_del+0x182/0x418 [ 204.830281] [<00000000c0dcfd7a>] pci_remove_bus_device+0x8a/0x130 [ 204.830283] [<00000000c0dcfe92>] pci_stop_and_remove_bus_device_locked+0x3a/0x48 [ 204.830285] [<00000000c0de7190>] disable_slot+0x68/0x100 [ 204.830286] [<00000000c0de6514>] power_write_file+0x7c/0x130 [ 204.830288] [<00000000c09cc846>] kernfs_fop_write+0xe6/0x218 [ 204.830290] [<00000000c08f3480>] vfs_write+0xb0/0x1b8 [ 204.830291] [<00000000c08f378c>] ksys_write+0x6c/0xf8 [ 204.830293] [<00000000c1154374>] system_call+0xd8/0x2d8 [ 204.830294] INFO: lockdep is turned off. Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com> Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-01-22s390/pci: Recover handle in clp_set_pci_fn()Niklas Schnelle2-20/+30
When we try to recover a PCI function using echo 1 > /sys/bus/pci/devices/<id>/recover or manually with echo 1 > /sys/bus/pci/devices/<id>/remove echo 0 > /sys/bus/pci/slots/<slot>/power echo 1 > /sys/bus/pci/slots/<slot>/power clp_disable_fn() / clp_enable_fn() call clp_set_pci_fn() to first disable and then reenable the function. When the function is already in the requested state we may be left with an invalid function handle. To get a new valid handle we do a clp_list_pci() call. For this we need both the function ID and function handle in clp_set_pci_fn() so pass the zdev and get both. To simplify things also pull setting the refreshed function handle into clp_set_pci_fn() Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com> Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2019-12-03Merge tag 'pci-v5.5-changes' of ↵Linus Torvalds2-11/+11
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: "Enumeration: - Warn if a host bridge has no NUMA info (Yunsheng Lin) - Add PCI_STD_NUM_BARS for the number of standard BARs (Denis Efremov) Resource management: - Fix boot-time Embedded Controller GPE storm caused by incorrect resource assignment after ACPI Bus Check Notification (Mika Westerberg) - Protect pci_reassign_bridge_resources() against concurrent addition/removal (Benjamin Herrenschmidt) - Fix bridge dma_ranges resource list cleanup (Rob Herring) - Add "pci=hpmmiosize" and "pci=hpmmioprefsize" parameters to control the MMIO and prefetchable MMIO window sizes of hotplug bridges independently (Nicholas Johnson) - Fix MMIO/MMIO_PREF window assignment that assigned more space than desired (Nicholas Johnson) - Only enforce bus numbers from bridge EA if the bridge has EA devices downstream (Subbaraya Sundeep) - Consolidate DT "dma-ranges" parsing and convert all host drivers to use shared parsing (Rob Herring) Error reporting: - Restore AER capability after resume (Mayurkumar Patel) - Add PoisonTLPBlocked AER counter (Rajat Jain) - Use for_each_set_bit() to simplify AER code (Andy Shevchenko) - Fix AER kernel-doc (Andy Shevchenko) - Add "pcie_ports=dpc-native" parameter to allow native use of DPC even if platform didn't grant control over AER (Olof Johansson) Hotplug: - Avoid returning prematurely from sysfs requests to enable or disable a PCIe hotplug slot (Lukas Wunner) - Don't disable interrupts twice when suspending hotplug ports (Mika Westerberg) - Fix deadlocks when PCIe ports are hot-removed while suspended (Mika Westerberg) Power management: - Remove unnecessary ASPM locking (Bjorn Helgaas) - Add support for disabling L1 PM Substates (Heiner Kallweit) - Allow re-enabling Clock PM after it has been disabled (Heiner Kallweit) - Add sysfs attributes for controlling ASPM link states (Heiner Kallweit) - Remove CONFIG_PCIEASPM_DEBUG, including "link_state" and "clk_ctl" sysfs files (Heiner Kallweit) - Avoid AMD FCH XHCI USB PME# from D0 defect that prevents wakeup on USB 2.0 or 1.1 connect events (Kai-Heng Feng) - Move power state check out of pci_msi_supported() (Bjorn Helgaas) - Fix incorrect MSI-X masking on resume and revert related nvme quirk for Kingston NVME SSD running FW E8FK11.T (Jian-Hong Pan) - Always return devices to D0 when thawing to fix hibernation with drivers like mlx4 that used legacy power management (previously we only did it for drivers with new power management ops) (Dexuan Cui) - Clear PCIe PME Status even for legacy power management (Bjorn Helgaas) - Fix PCI PM documentation errors (Bjorn Helgaas) - Use dev_printk() for more power management messages (Bjorn Helgaas) - Apply D2 delay as milliseconds, not microseconds (Bjorn Helgaas) - Convert xen-platform from legacy to generic power management (Bjorn Helgaas) - Removed unused .resume_early() and .suspend_late() legacy power management hooks (Bjorn Helgaas) - Rearrange power management code for clarity (Rafael J. Wysocki) - Decode power states more clearly ("4" or "D4" really refers to "D3cold") (Bjorn Helgaas) - Notice when reading PM Control register returns an error (~0) instead of interpreting it as being in D3hot (Bjorn Helgaas) - Add missing link delays required by the PCIe spec (Mika Westerberg) Virtualization: - Move pci_prg_resp_pasid_required() to CONFIG_PCI_PRI (Bjorn Helgaas) - Allow VFs to use PRI (the PF PRI is shared by the VFs, but the code previously didn't recognize that) (Kuppuswamy Sathyanarayanan) - Allow VFs to use PASID (the PF PASID capability is shared by the VFs, but the code previously didn't recognize that) (Kuppuswamy Sathyanarayanan) - Disconnect PF and VF ATS enablement, since ATS in PFs and associated VFs can be enabled independently (Kuppuswamy Sathyanarayanan) - Cache PRI and PASID capability offsets (Kuppuswamy Sathyanarayanan) - Cache the PRI PRG Response PASID Required bit (Bjorn Helgaas) - Consolidate ATS declarations in linux/pci-ats.h (Krzysztof Wilczynski) - Remove unused PRI and PASID stubs (Bjorn Helgaas) - Removed unnecessary EXPORT_SYMBOL_GPL() from ATS, PRI, and PASID interfaces that are only used by built-in IOMMU drivers (Bjorn Helgaas) - Hide PRI and PASID state restoration functions used only inside the PCI core (Bjorn Helgaas) - Add a DMA alias quirk for the Intel VCA NTB (Slawomir Pawlowski) - Serialize sysfs sriov_numvfs reads vs writes (Pierre Crégut) - Update Cavium ACS quirk for ThunderX2 and ThunderX3 (George Cherian) - Fix the UPDCR register address in the Intel ACS quirk (Steffen Liebergeld) - Unify ACS quirk implementations (Bjorn Helgaas) Amlogic Meson host bridge driver: - Fix meson PERST# GPIO polarity problem (Remi Pommarel) - Add DT bindings for Amlogic Meson G12A (Neil Armstrong) - Fix meson clock names to match DT bindings (Neil Armstrong) - Add meson support for Amlogic G12A SoC with separate shared PHY (Neil Armstrong) - Add meson extended PCIe PHY functions for Amlogic G12A USB3+PCIe combo PHY (Neil Armstrong) - Add arm64 DT for Amlogic G12A PCIe controller node (Neil Armstrong) - Add commented-out description of VIM3 USB3/PCIe mux in arm64 DT (Neil Armstrong) Broadcom iProc host bridge driver: - Invalidate iProc PAXB address mapping before programming it (Abhishek Shah) - Fix iproc-msi and mvebu __iomem annotations (Ben Dooks) Cadence host bridge driver: - Refactor Cadence PCIe host controller to use as a library for both host and endpoint (Tom Joseph) Freescale Layerscape host bridge driver: - Add layerscape LS1028a support (Xiaowei Bao) Intel VMD host bridge driver: - Add VMD bus 224-255 restriction decode (Jon Derrick) - Add VMD 8086:9A0B device ID (Jon Derrick) - Remove Keith from VMD maintainer list (Keith Busch) Marvell ARMADA 3700 / Aardvark host bridge driver: - Use LTSSM state to build link training flag since Aardvark doesn't implement the Link Training bit (Remi Pommarel) - Delay before training Aardvark link in case PERST# was asserted before the driver probe (Remi Pommarel) - Fix Aardvark issues with Root Control reads and writes (Remi Pommarel) - Don't rely on jiffies in Aardvark config access path since interrupts may be disabled (Remi Pommarel) - Fix Aardvark big-endian support (Grzegorz Jaszczyk) Marvell ARMADA 370 / XP host bridge driver: - Make mvebu_pci_bridge_emul_ops static (Ben Dooks) Microsoft Hyper-V host bridge driver: - Add hibernation support for Hyper-V virtual PCI devices (Dexuan Cui) - Track Hyper-V pci_protocol_version per-hbus, not globally (Dexuan Cui) - Avoid kmemleak false positive on hv hbus buffer (Dexuan Cui) Mobiveil host bridge driver: - Change mobiveil csr_read()/write() function names that conflict with riscv arch functions (Kefeng Wang) NVIDIA Tegra host bridge driver: - Fix Tegra CLKREQ dependency programming (Vidya Sagar) Renesas R-Car host bridge driver: - Remove unnecessary header include from rcar (Andrew Murray) - Tighten register index checking for rcar inbound range programming (Marek Vasut) - Fix rcar inbound range alignment calculation to improve packing of multiple entries (Marek Vasut) - Update rcar MACCTLR setting to match documentation (Yoshihiro Shimoda) - Clear bit 0 of MACCTLR before PCIETCTLR.CFINIT per manual (Yoshihiro Shimoda) - Add Marek Vasut and Yoshihiro Shimoda as R-Car maintainers (Simon Horman) Rockchip host bridge driver: - Make rockchip 0V9 and 1V8 power regulators non-optional (Robin Murphy) Socionext UniPhier host bridge driver: - Set uniphier to host (RC) mode always (Kunihiko Hayashi) Endpoint drivers: - Fix endpoint driver sign extension problem when shifting page number to phys_addr_t (Alan Mikhak) Misc: - Add NumaChip SPDX header (Krzysztof Wilczynski) - Replace EXTRA_CFLAGS with ccflags-y (Krzysztof Wilczynski) - Remove unused includes (Krzysztof Wilczynski) - Removed unused sysfs attribute groups (Ben Dooks) - Remove PTM and ASPM dependencies on PCIEPORTBUS (Bjorn Helgaas) - Add PCIe Link Control 2 register field definitions to replace magic numbers in AMDGPU and Radeon CIK/SI (Bjorn Helgaas) - Fix incorrect Link Control 2 Transmit Margin usage in AMDGPU and Radeon CIK/SI PCIe Gen3 link training (Bjorn Helgaas) - Use pcie_capability_read_word() instead of pci_read_config_word() in AMDGPU and Radeon CIK/SI (Frederick Lawler) - Remove unused pci_irq_get_node() Greg Kroah-Hartman) - Make asm/msi.h mandatory and simplify PCI_MSI_IRQ_DOMAIN Kconfig (Palmer Dabbelt, Michal Simek) - Read all 64 bits of Switchtec part_event_bitmap (Logan Gunthorpe) - Fix erroneous intel-iommu dependency on CONFIG_AMD_IOMMU (Bjorn Helgaas) - Fix bridge emulation big-endian support (Grzegorz Jaszczyk) - Fix dwc find_next_bit() usage (Niklas Cassel) - Fix pcitest.c fd leak (Hewenliang) - Fix typos and comments (Bjorn Helgaas) - Fix Kconfig whitespace errors (Krzysztof Kozlowski)" * tag 'pci-v5.5-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (160 commits) PCI: Remove PCI_MSI_IRQ_DOMAIN architecture whitelist asm-generic: Make msi.h a mandatory include/asm header Revert "nvme: Add quirk for Kingston NVME SSD running FW E8FK11.T" PCI/MSI: Fix incorrect MSI-X masking on resume PCI/MSI: Move power state check out of pci_msi_supported() PCI/MSI: Remove unused pci_irq_get_node() PCI: hv: Avoid a kmemleak false positive caused by the hbus buffer PCI: hv: Change pci_protocol_version to per-hbus PCI: hv: Add hibernation support PCI: hv: Reorganize the code in preparation of hibernation MAINTAINERS: Remove Keith from VMD maintainer PCI/ASPM: Remove PCIEASPM_DEBUG Kconfig option and related code PCI/ASPM: Add sysfs attributes for controlling ASPM link states PCI: Fix indentation drm/radeon: Prefer pcie_capability_read_word() drm/radeon: Replace numbers with PCI_EXP_LNKCTL2 definitions drm/radeon: Correct Transmit Margin masks drm/amdgpu: Prefer pcie_capability_read_word() PCI: uniphier: Set mode register to host mode drm/amdgpu: Replace numbers with PCI_EXP_LNKCTL2 definitions ...
2019-11-30s390/pci: add error message on device number limitNiklas Schnelle1-0/+2
The config option CONFIG_PCI_NR_FUNCTIONS sets a limit on the number of PCI functions we can support. Previously on reaching this limit there was no indication why newly attached devices are not recognized by Linux which could be quite confusing. Thus this patch adds a pr_err() for this case. Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com> Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2019-11-30s390/pci: add error message for UID collisionNiklas Schnelle1-0/+3
When UID checking was turned off during runtime in the underlying hypervisor, a PCI device may be attached with the same UID. This is already detected but happens silently. Add an error message so it can more easily be understood why a device was not added. Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com> Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2019-11-28Merge branch 'pci/resource'Bjorn Helgaas2-11/+11
- Protect pci_reassign_bridge_resources() against concurrent addition/removal (Benjamin Herrenschmidt) - Fix bridge dma_ranges resource list cleanup (Rob Herring) - Add PCI_STD_NUM_BARS for the number of standard BARs (Denis Efremov) - Add "pci=hpmmiosize" and "pci=hpmmioprefsize" parameters to control the MMIO and prefetchable MMIO window sizes of hotplug bridges independently (Nicholas Johnson) - Fix MMIO/MMIO_PREF window assignment that assigned more space than desired (Nicholas Johnson) - Only enforce bus numbers from bridge EA if the bridge has EA devices downstream (Subbaraya Sundeep) * pci/resource: PCI: Do not use bus number zero from EA capability PCI: Avoid double hpmemsize MMIO window assignment PCI: Add "pci=hpmmiosize" and "pci=hpmmioprefsize" parameters PCI: Add PCI_STD_NUM_BARS for the number of standard BARs PCI: Fix missing bridge dma_ranges resource list cleanup PCI: Protect pci_reassign_bridge_resources() against concurrent addition/removal
2019-10-14PCI: Add PCI_STD_NUM_BARS for the number of standard BARsDenis Efremov2-11/+11
Code that iterates over all standard PCI BARs typically uses PCI_STD_RESOURCE_END. However, that requires the unusual test "i <= PCI_STD_RESOURCE_END" rather than something the typical "i < PCI_STD_NUM_BARS". Add a definition for PCI_STD_NUM_BARS and change loops to use the more idiomatic C style to help avoid fencepost errors. Link: https://lore.kernel.org/r/20190927234026.23342-1-efremov@linux.com Link: https://lore.kernel.org/r/20190927234308.23935-1-efremov@linux.com Link: https://lore.kernel.org/r/20190916204158.6889-3-efremov@linux.com Signed-off-by: Denis Efremov <efremov@linux.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Sebastian Ott <sebott@linux.ibm.com> # arch/s390/ Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> # video/fbdev/ Acked-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com> # pci/controller/dwc/ Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com> # scsi/pm8001/ Acked-by: Martin K. Petersen <martin.petersen@oracle.com> # scsi/pm8001/ Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # memstick/
2019-10-04s390/pci: mark function(s) __always_inlineHeiko Carstens1-1/+1
Always inline asm inlines with variable operands for "i" constraints, since they won't compile if the compiler would decide to not inline them. Reported-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2019-09-19Merge tag 'dma-mapping-5.4' of git://git.infradead.org/users/hch/dma-mappingLinus Torvalds1-0/+2
Pull dma-mapping updates from Christoph Hellwig: - add dma-mapping and block layer helpers to take care of IOMMU merging for mmc plus subsequent fixups (Yoshihiro Shimoda) - rework handling of the pgprot bits for remapping (me) - take care of the dma direct infrastructure for swiotlb-xen (me) - improve the dma noncoherent remapping infrastructure (me) - better defaults for ->mmap, ->get_sgtable and ->get_required_mask (me) - cleanup mmaping of coherent DMA allocations (me) - various misc cleanups (Andy Shevchenko, me) * tag 'dma-mapping-5.4' of git://git.infradead.org/users/hch/dma-mapping: (41 commits) mmc: renesas_sdhi_internal_dmac: Add MMC_CAP2_MERGE_CAPABLE mmc: queue: Fix bigger segments usage arm64: use asm-generic/dma-mapping.h swiotlb-xen: merge xen_unmap_single into xen_swiotlb_unmap_page swiotlb-xen: simplify cache maintainance swiotlb-xen: use the same foreign page check everywhere swiotlb-xen: remove xen_swiotlb_dma_mmap and xen_swiotlb_dma_get_sgtable xen: remove the exports for xen_{create,destroy}_contiguous_region xen/arm: remove xen_dma_ops xen/arm: simplify dma_cache_maint xen/arm: use dev_is_dma_coherent xen/arm: consolidate page-coherent.h xen/arm: use dma-noncoherent.h calls for xen-swiotlb cache maintainance arm: remove wrappers for the generic dma remap helpers dma-mapping: introduce a dma_common_find_pages helper dma-mapping: always use VM_DMA_COHERENT for generic DMA remap vmalloc: lift the arm flag for coherent mappings to common code dma-mapping: provide a better default ->get_required_mask dma-mapping: remove the dma_declare_coherent_memory export remoteproc: don't allow modular build ...
2019-09-16s390/pci: fix MSI message dataSebastian Ott1-1/+1
After recent changes the MSI message data needs to specify the function-relative IRQ number. Reported-and-tested-by: Alexander Schmidt <alexs@linux.ibm.com> Signed-off-by: Sebastian Ott <sebott@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2019-09-04dma-mapping: explicitly wire up ->mmap and ->get_sgtableChristoph Hellwig1-0/+2
While the default ->mmap and ->get_sgtable implementations work for the majority of our dma_map_ops impementations they are inherently safe for others that don't use the page allocator or CMA and/or use their own way of remapping not covered by the common code. So remove the defaults if these methods are not wired up, but instead wire up the default implementations for all safe instances. Fixes: e1c7e324539a ("dma-mapping: always provide the dma_map_ops based implementation") Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-08-29s390/pci: avoid using strncmp with hardcoded lengthVasily Gorbik1-2/+2
Command line option values passed to __setup callbacks are always null-terminated and "s390_iommu=" may only accept "strict" as value. So replace strncmp with strcmp. While at it also make s390_iommu_setup return 1, which means this command line option is handled by this callback. Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2019-08-21s390/pci: PCI_IOV_RESOURCES loop refactoring in zpci_map_resourcesDenis Efremov1-4/+4
This patch alters the for loop iteration scheme in zpci_map_resources to make it more usual. Thus, the patch generalizes the style for PCI_IOV_RESOURCES iteration and improves readability. Link: http://lkml.kernel.org/r/20190806160137.29275-1-efremov@linux.com Signed-off-by: Denis Efremov <efremov@linux.com> Signed-off-by: Sebastian Ott <sebott@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2019-07-12Merge tag 's390-5.3-2' of ↵Linus Torvalds2-1/+13
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull more s390 updates from Vasily Gorbik: - Fix integer overflow during stack frame unwind with invalid backchain. - Cleanup unused symbol export in zcrypt code. - Fix MIO addressing control activation in PCI code and expose its usage via sysfs. - Fix kernel image signature verification report presence detection. - Fix irq registration in vfio-ap code. - Add CPU measurement counters for newer machines. - Add base DASD thin provisioning support and code cleanups. * tag 's390-5.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (21 commits) s390/unwind: avoid int overflow in outside_of_stack s390/zcrypt: remove the exporting of ap_query_configuration s390/pci: add mio_enabled attribute s390: fix setting of mio addressing control s390/ipl: Fix detection of has_secure attribute s390: vfio-ap: fix irq registration s390/cpumf: Add extended counter set definitions for model 8561 and 8562 s390/dasd: Handle out-of-space constraint s390/dasd: Add discard support for ESE volumes s390/dasd: Use ALIGN_DOWN macro s390/dasd: Make dasd_setup_queue() a discipline function s390/dasd: Add new ioctl to release space s390/dasd: Add dasd_sleep_on_queue_interruptible() s390/dasd: Add missing intensity definition s390/dasd: Fix whitespace s390/dasd: Add dynamic formatting support for ESE volumes s390/dasd: Recognise data for ESE volumes s390/dasd: Put sub-order definitions in a separate section s390/dasd: Make layout analysis ESE compatible s390/dasd: Remove old defines and function ...
2019-07-11s390/pci: add mio_enabled attributeSebastian Ott1-0/+10
Provide an attribute to query the usage of mio instructions. Signed-off-by: Sebastian Ott <sebott@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2019-07-11s390: fix setting of mio addressing controlSebastian Ott1-1/+3
Move enablement of mio addressing control from detect_machine_facilities to pci_base_init. detect_machine_facilities runs so early that the static branches have not been toggled yet, thus mio addressing control was always off. In pci_base_init we have to use the SMP aware ctl_set_bit though. Fixes: 833b441ec0f6 ("s390: enable processes for mio instructions") Signed-off-by: Sebastian Ott <sebott@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2019-07-08Merge branch 'locking-core-for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull locking updates from Ingo Molnar: "The main changes in this cycle are: - rwsem scalability improvements, phase #2, by Waiman Long, which are rather impressive: "On a 2-socket 40-core 80-thread Skylake system with 40 reader and writer locking threads, the min/mean/max locking operations done in a 5-second testing window before the patchset were: 40 readers, Iterations Min/Mean/Max = 1,807/1,808/1,810 40 writers, Iterations Min/Mean/Max = 1,807/50,344/151,255 After the patchset, they became: 40 readers, Iterations Min/Mean/Max = 30,057/31,359/32,741 40 writers, Iterations Min/Mean/Max = 94,466/95,845/97,098" There's a lot of changes to the locking implementation that makes it similar to qrwlock, including owner handoff for more fair locking. Another microbenchmark shows how across the spectrum the improvements are: "With a locking microbenchmark running on 5.1 based kernel, the total locking rates (in kops/s) on a 2-socket Skylake system with equal numbers of readers and writers (mixed) before and after this patchset were: # of Threads Before Patch After Patch ------------ ------------ ----------- 2 2,618 4,193 4 1,202 3,726 8 802 3,622 16 729 3,359 32 319 2,826 64 102 2,744" The changes are extensive and the patch-set has been through several iterations addressing various locking workloads. There might be more regressions, but unless they are pathological I believe we want to use this new implementation as the baseline going forward. - jump-label optimizations by Daniel Bristot de Oliveira: the primary motivation was to remove IPI disturbance of isolated RT-workload CPUs, which resulted in the implementation of batched jump-label updates. Beyond the improvement of the real-time characteristics kernel, in one test this patchset improved static key update overhead from 57 msecs to just 1.4 msecs - which is a nice speedup as well. - atomic64_t cross-arch type cleanups by Mark Rutland: over the last ~10 years of atomic64_t existence the various types used by the APIs only had to be self-consistent within each architecture - which means they became wildly inconsistent across architectures. Mark puts and end to this by reworking all the atomic64 implementations to use 's64' as the base type for atomic64_t, and to ensure that this type is consistently used for parameters and return values in the API, avoiding further problems in this area. - A large set of small improvements to lockdep by Yuyang Du: type cleanups, output cleanups, function return type and othr cleanups all around the place. - A set of percpu ops cleanups and fixes by Peter Zijlstra. - Misc other changes - please see the Git log for more details" * 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (82 commits) locking/lockdep: increase size of counters for lockdep statistics locking/atomics: Use sed(1) instead of non-standard head(1) option locking/lockdep: Move mark_lock() inside CONFIG_TRACE_IRQFLAGS && CONFIG_PROVE_LOCKING x86/jump_label: Make tp_vec_nr static x86/percpu: Optimize raw_cpu_xchg() x86/percpu, sched/fair: Avoid local_clock() x86/percpu, x86/irq: Relax {set,get}_irq_regs() x86/percpu: Relax smp_processor_id() x86/percpu: Differentiate this_cpu_{}() and __this_cpu_{}() locking/rwsem: Guard against making count negative locking/rwsem: Adaptive disabling of reader optimistic spinning locking/rwsem: Enable time-based spinning on reader-owned rwsem locking/rwsem: Make rwsem->owner an atomic_long_t locking/rwsem: Enable readers spinning on writer locking/rwsem: Clarify usage of owner's nonspinaable bit locking/rwsem: Wake up almost all readers in wait queue locking/rwsem: More optimal RT task handling of null owner locking/rwsem: Always release wait_lock before waking up tasks locking/rwsem: Implement lock handoff to prevent lock starvation locking/rwsem: Make rwsem_spin_on_owner() return owner state ...
2019-07-04s390/pci: correctly handle MIO opt-outSebastian Ott1-1/+1
Do not issue CLP_SET_ENABLE_MIO after opting out of MIO instruction usage. This should not fix a bug but reduce overhead within firmware. Signed-off-by: Sebastian Ott <sebott@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2019-07-04s390/pci: deal with devices that have no support for MIO instructionsSebastian Ott1-7/+8
Unfortunately we have to handle a class of devices that don't support the new MIO instructions. Adjust resource assignment and mapping accordingly. Signed-off-by: Sebastian Ott <sebott@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2019-06-03locking/atomic, s390/pci: Remove redundant castsMark Rutland1-1/+1
Now that atomic64_read() returns s64 consistently, we don't need to explicitly cast its return value. Drop the redundant casts. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will.deacon@arm.com> Cc: aou@eecs.berkeley.edu Cc: arnd@arndb.de Cc: bp@alien8.de Cc: catalin.marinas@arm.com Cc: davem@davemloft.net Cc: fenghua.yu@intel.com Cc: herbert@gondor.apana.org.au Cc: ink@jurassic.park.msu.ru Cc: jhogan@kernel.org Cc: linux@armlinux.org.uk Cc: mattst88@gmail.com Cc: mpe@ellerman.id.au Cc: palmer@sifive.com Cc: paul.burton@mips.com Cc: paulus@samba.org Cc: ralf@linux-mips.org Cc: rth@twiddle.net Cc: tony.luck@intel.com Cc: vgupta@synopsys.com Link: https://lkml.kernel.org/r/20190522132250.26499-19-mark.rutland@arm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-06-03locking/atomic, s390/pci: Prepare for atomic64_read() conversionMark Rutland1-2/+2
The return type of atomic64_read() varies by architecture. It may return long (e.g. powerpc), long long (e.g. arm), or s64 (e.g. x86_64). This is somewhat painful, and mandates the use of explicit casts in some cases (e.g. when printing the return value). To ameliorate matters, subsequent patches will make the atomic64 API consistently use s64. As a preparatory step, this patch updates the s390 pci debug code to treat the return value of atomic64_read() as s64, using an explicit cast. This cast will be removed once the s64 conversion is complete. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will.deacon@arm.com> Cc: aou@eecs.berkeley.edu Cc: arnd@arndb.de Cc: bp@alien8.de Cc: catalin.marinas@arm.com Cc: davem@davemloft.net Cc: fenghua.yu@intel.com Cc: herbert@gondor.apana.org.au Cc: ink@jurassic.park.msu.ru Cc: jhogan@kernel.org Cc: linux@armlinux.org.uk Cc: mattst88@gmail.com Cc: mpe@ellerman.id.au Cc: palmer@sifive.com Cc: paul.burton@mips.com Cc: paulus@samba.org Cc: ralf@linux-mips.org Cc: rth@twiddle.net Cc: tony.luck@intel.com Cc: vgupta@synopsys.com Link: https://lkml.kernel.org/r/20190522132250.26499-3-mark.rutland@arm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-05-28s390/pci: fix assignment of bus resourcesSebastian Ott1-1/+4
Adjust bus resources depending on the usage of MIO instructions. Fixes: 71ba41c9b1d9 ("s390/pci: provide support for MIO instructions") Signed-off-by: Sebastian Ott <sebott@linux.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2019-05-28s390/pci: fix struct definition for set PCI functionSebastian Ott1-3/+3
Recent firmware will store PCI MIO information also when enabling MIO instructions via set PCI function. We do not use this information but currently calling enable MIO will fail because of insufficient response block length. Fix this by putting a struct mio_info at the end of the affected response block struct. Fixes: 71ba41c9b1d9 ("s390/pci: provide support for MIO instructions") Signed-off-by: Sebastian Ott <sebott@linux.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2019-04-29s390/pci: add parameter to disable usage of MIO instructionsSebastian Ott1-1/+6
Allow users to disable usage of MIO instructions by specifying pci=nomio at the kernel command line. Signed-off-by: Sebastian Ott <sebott@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2019-04-29s390/pci: provide support for MIO instructionsSebastian Ott3-20/+266
Provide support for PCI I/O instructions that work on mapped IO addresses. Signed-off-by: Sebastian Ott <sebott@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2019-04-29s390/pci: move io address mapping code to pci_insn.cSebastian Ott2-6/+36
This is a preparation patch for usage of new pci instructions. No functional change. Signed-off-by: Sebastian Ott <sebott@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2019-04-29s390/pci: add parameter to force floating irqsSebastian Ott2-0/+8
Provide a kernel parameter to force the usage of floating interrupts. Signed-off-by: Sebastian Ott <sebott@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-03 03:57:48 +0000