summaryrefslogtreecommitdiffstats
path: root/arch/s390/kernel
AgeCommit message (Collapse)AuthorFilesLines
2014-08-09Merge branch 'signal-cleanup' of ↵Linus Torvalds3-92/+69
git://git.kernel.org/pub/scm/linux/kernel/git/rw/misc Pull arch signal handling cleanup from Richard Weinberger: "This patch series moves all remaining archs to the get_signal(), signal_setup_done() and sigsp() functions. Currently these archs use open coded variants of the said functions. Further, unused parameters get removed from get_signal_to_deliver(), tracehook_signal_handler() and signal_delivered(). At the end of the day we save around 500 lines of code." * 'signal-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/misc: (43 commits) powerpc: Use sigsp() openrisc: Use sigsp() mn10300: Use sigsp() mips: Use sigsp() microblaze: Use sigsp() metag: Use sigsp() m68k: Use sigsp() m32r: Use sigsp() hexagon: Use sigsp() frv: Use sigsp() cris: Use sigsp() c6x: Use sigsp() blackfin: Use sigsp() avr32: Use sigsp() arm64: Use sigsp() arc: Use sigsp() sas_ss_flags: Remove nested ternary if Rip out get_signal_to_deliver() Clean up signal_delivered() tracehook_signal_handler: Remove sig, info, ka and regs ...
2014-08-08arm64,ia64,ppc,s390,sh,tile,um,x86,mm: remove default gate areaAndy Lutomirski1-15/+0
The core mm code will provide a default gate area based on FIXADDR_USER_START and FIXADDR_USER_END if !defined(__HAVE_ARCH_GATE_AREA) && defined(AT_SYSINFO_EHDR). This default is only useful for ia64. arm64, ppc, s390, sh, tile, 64-bit UML, and x86_32 have their own code just to disable it. arm, 32-bit UML, and x86_64 have gate areas, but they have their own implementations. This gets rid of the default and moves the code into ia64. This should save some code on architectures without a gate area: it's now possible to inline the gate_area functions in the default case. Signed-off-by: Andy Lutomirski <luto@amacapital.net> Acked-by: Nathan Lynch <nathan_lynch@mentor.com> Acked-by: H. Peter Anvin <hpa@linux.intel.com> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [in principle] Acked-by: Richard Weinberger <richard@nod.at> [for um] Acked-by: Will Deacon <will.deacon@arm.com> [for arm64] Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Jeff Dike <jdike@addtoit.com> Cc: Richard Weinberger <richard@nod.at> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Nathan Lynch <Nathan_Lynch@mentor.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-07Merge branch 'for-linus' of ↵Linus Torvalds2-45/+52
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 updates from Martin Schwidefsky: "Mostly cleanups and bug-fixes, with two exceptions. The first is lazy flushing of I/O-TLBs for PCI to improve performance, the second is software dirty bits in the pmd for the madvise-free implementation" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (24 commits) s390/locking: Reenable optimistic spinning s390/mm: implement dirty bits for large segment table entries KVM: s390/mm: Fix page table locking vs. split pmd lock s390/dasd: fix camel case s390/3215: fix hanging console issue s390/irq: improve displayed interrupt order in /proc/interrupts s390/seccomp: fix error return for filtered system calls s390/pci: introduce lazy IOTLB flushing for DMA unmap dasd: fix error recovery for alias devices during format dasd: fix list_del corruption during format dasd: fix unresponsive device during format dasd: use aliases for formatted devices during format s390/pci: fix kmsg component s390/kdump: Return NOTIFY_OK for all actions other than MEM_GOING_OFFLINE s390/watchdog: Fix module name in Kconfig help text s390/dasd: replace seq_printf by seq_puts s390/dasd: replace pr_warning by pr_warn s390/dasd: Move EXPORT_SYMBOL after function/variable s390/dasd: remove unnecessary null test before debugfs_remove s390/zfcp: use qdio buffer helpers ...
2014-08-06s390: Use get_signal() signal_setup_done()Richard Weinberger3-92/+69
Use the more generic functions get_signal() signal_setup_done() for signal delivery. Signed-off-by: Richard Weinberger <richard@nod.at>
2014-08-05Merge branch 'timers-core-for-linus' of ↵Linus Torvalds1-8/+8
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer and time updates from Thomas Gleixner: "A rather large update of timers, timekeeping & co - Core timekeeping code is year-2038 safe now for 32bit machines. Now we just need to fix all in kernel users and the gazillion of user space interfaces which rely on timespec/timeval :) - Better cache layout for the timekeeping internal data structures. - Proper nanosecond based interfaces for in kernel users. - Tree wide cleanup of code which wants nanoseconds but does hoops and loops to convert back and forth from timespecs. Some of it definitely belongs into the ugly code museum. - Consolidation of the timekeeping interface zoo. - A fast NMI safe accessor to clock monotonic for tracing. This is a long standing request to support correlated user/kernel space traces. With proper NTP frequency correction it's also suitable for correlation of traces accross separate machines. - Checkpoint/restart support for timerfd. - A few NOHZ[_FULL] improvements in the [hr]timer code. - Code move from kernel to kernel/time of all time* related code. - New clocksource/event drivers from the ARM universe. I'm really impressed that despite an architected timer in the newer chips SoC manufacturers insist on inventing new and differently broken SoC specific timers. [ Ed. "Impressed"? I don't think that word means what you think it means ] - Another round of code move from arch to drivers. Looks like most of the legacy mess in ARM regarding timers is sorted out except for a few obnoxious strongholds. - The usual updates and fixlets all over the place" * 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (114 commits) timekeeping: Fixup typo in update_vsyscall_old definition clocksource: document some basic timekeeping concepts timekeeping: Use cached ntp_tick_length when accumulating error timekeeping: Rework frequency adjustments to work better w/ nohz timekeeping: Minor fixup for timespec64->timespec assignment ftrace: Provide trace clocks monotonic timekeeping: Provide fast and NMI safe access to CLOCK_MONOTONIC seqcount: Add raw_write_seqcount_latch() seqcount: Provide raw_read_seqcount() timekeeping: Use tk_read_base as argument for timekeeping_get_ns() timekeeping: Create struct tk_read_base and use it in struct timekeeper timekeeping: Restructure the timekeeper some more clocksource: Get rid of cycle_last clocksource: Move cycle_last validation to core code clocksource: Make delta calculation a function wireless: ath9k: Get rid of timespec conversions drm: vmwgfx: Use nsec based interfaces drm: i915: Use nsec based interfaces timekeeping: Provide ktime_get_raw() hangcheck-timer: Use ktime_get_ns() ...
2014-08-04Merge branch 'perf-core-for-linus' of ↵Linus Torvalds1-6/+6
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf changes from Ingo Molnar: "Kernel side changes: - Consolidate the PMU interrupt-disabled code amongst architectures (Vince Weaver) - misc fixes Tooling changes (new features, user visible changes): - Add support for pagefault tracing in 'trace', please see multiple examples in the changeset messages (Stanislav Fomichev). - Add pagefault statistics in 'trace' (Stanislav Fomichev) - Add header for columns in 'top' and 'report' TUI browsers (Jiri Olsa) - Add pagefault statistics in 'trace' (Stanislav Fomichev) - Add IO mode into timechart command (Stanislav Fomichev) - Fallback to syscalls:* when raw_syscalls:* is not available in the perl and python perf scripts. (Daniel Bristot de Oliveira) - Add --repeat global option to 'perf bench' to be used in benchmarks such as the existing 'futex' one, that was modified to use it instead of a local option. (Davidlohr Bueso) - Fix fd -> pathname resolution in 'trace', be it using /proc or a vfs_getname probe point. (Arnaldo Carvalho de Melo) - Add suggestion of how to set perf_event_paranoid sysctl, to help non-root users trying tools like 'trace' to get a working environment. (Arnaldo Carvalho de Melo) - Updates from trace-cmd for traceevent plugin_kvm plus args cleanup (Steven Rostedt, Jan Kiszka) - Support S/390 in 'perf kvm stat' (Alexander Yarygin) Tooling infrastructure changes: - Allow reserving a row for header purposes in the hists browser (Arnaldo Carvalho de Melo) - Various fixes and prep work related to supporting Intel PT (Adrian Hunter) - Introduce multiple debug variables control (Jiri Olsa) - Add callchain and additional sample information for python scripts (Joseph Schuchart) - More prep work to support Intel PT: (Adrian Hunter) - Polishing 'script' BTS output - 'inject' can specify --kallsym - VDSO is per machine, not a global var - Expose data addr lookup functions previously private to 'script' - Large mmap fixes in events processing - Include standard stringify macros in power pc code (Sukadev Bhattiprolu) Tooling cleanups: - Convert open coded equivalents to asprintf() (Andy Shevchenko) - Remove needless reassignments in 'trace' (Arnaldo Carvalho de Melo) - Cache the is_exit syscall test in 'trace) (Arnaldo Carvalho de Melo) - No need to reimplement err() in 'perf bench sched-messaging', drop barf(). (Davidlohr Bueso). - Remove ev_name argument from perf_evsel__hists_browse, can be obtained from the other parameters. (Jiri Olsa) Tooling fixes: - Fix memory leak in the 'sched-messaging' perf bench test. (Davidlohr Bueso) - The -o and -n 'perf bench mem' options are mutually exclusive, emit error when both are specified. (Davidlohr Bueso) - Fix scrollbar refresh row index in the ui browser, problem exposed now that headers will be added and will be allowed to be switched on/off. (Jiri Olsa) - Handle the num array type in python properly (Sebastian Andrzej Siewior) - Fix wrong condition for allocation failure (Jiri Olsa) - Adjust callchain based on DWARF debug info on powerpc (Sukadev Bhattiprolu) - Fix a risk for doing free on uninitialized pointer in traceevent lib (Rickard Strandqvist) - Update attr test with PERF_FLAG_FD_CLOEXEC flag (Jiri Olsa) - Enable close-on-exec flag on perf file descriptor (Yann Droneaud) - Fix build on gcc 4.4.7 (Arnaldo Carvalho de Melo) - Event ordering fixes (Jiri Olsa)" * 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (123 commits) Revert "perf tools: Fix jump label always changing during tracing" perf tools: Fix perf usage string leftover perf: Check permission only for parent tracepoint event perf record: Store PERF_RECORD_FINISHED_ROUND only for nonempty rounds perf record: Always force PERF_RECORD_FINISHED_ROUND event perf inject: Add --kallsyms parameter perf tools: Expose 'addr' functions so they can be reused perf session: Fix accounting of ordered samples queue perf powerpc: Include util/util.h and remove stringify macros perf tools: Fix build on gcc 4.4.7 perf tools: Add thread parameter to vdso__dso_findnew() perf tools: Add dso__type() perf tools: Separate the VDSO map name from the VDSO dso name perf tools: Add vdso__new() perf machine: Fix the lifetime of the VDSO temporary file perf tools: Group VDSO global variables into a structure perf session: Add ability to skip 4GiB or more perf session: Add ability to 'skip' a non-piped event stream perf tools: Pass machine to vdso__dso_findnew() perf tools: Add dso__data_size() ...
2014-08-04Merge tag 'trace-3.17' of ↵Linus Torvalds2-10/+3
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing updates from Steven Rostedt: "This pull request has a lot of work done. The main thing is the changes to the ftrace function callback infrastructure. It's introducing a way to allow different functions to call directly different trampolines instead of all calling the same "mcount" one. The only user of this for now is the function graph tracer, which always had a different trampoline, but the function tracer trampoline was called and did basically nothing, and then the function graph tracer trampoline was called. The difference now, is that the function graph tracer trampoline can be called directly if a function is only being traced by the function graph trampoline. If function tracing is also happening on the same function, the old way is still done. The accounting for this takes up more memory when function graph tracing is activated, as it needs to keep track of which functions it uses. I have a new way that wont take as much memory, but it's not ready yet for this merge window, and will have to wait for the next one. Another big change was the removal of the ftrace_start/stop() calls that were used by the suspend/resume code that stopped function tracing when entering into suspend and resume paths. The stop of ftrace was done because there was some function that would crash the system if one called smp_processor_id()! The stop/start was a big hammer to solve the issue at the time, which was when ftrace was first introduced into Linux. Now ftrace has better infrastructure to debug such issues, and I found the problem function and labeled it with "notrace" and function tracing can now safely be activated all the way down into the guts of suspend and resume Other changes include clean ups of uprobe code, clean up of the trace_seq() code, and other various small fixes and clean ups to ftrace and tracing" * tag 'trace-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (57 commits) ftrace: Add warning if tramp hash does not match nr_trampolines ftrace: Fix trampoline hash update check on rec->flags ring-buffer: Use rb_page_size() instead of open coded head_page size ftrace: Rename ftrace_ops field from trampolines to nr_trampolines tracing: Convert local function_graph functions to static ftrace: Do not copy old hash when resetting tracing: let user specify tracing_thresh after selecting function_graph ring-buffer: Always run per-cpu ring buffer resize with schedule_work_on() tracing: Remove function_trace_stop and HAVE_FUNCTION_TRACE_MCOUNT_TEST s390/ftrace: remove check of obsolete variable function_trace_stop arm64, ftrace: Remove check of obsolete variable function_trace_stop Blackfin: ftrace: Remove check of obsolete variable function_trace_stop metag: ftrace: Remove check of obsolete variable function_trace_stop microblaze: ftrace: Remove check of obsolete variable function_trace_stop MIPS: ftrace: Remove check of obsolete variable function_trace_stop parisc: ftrace: Remove check of obsolete variable function_trace_stop sh: ftrace: Remove check of obsolete variable function_trace_stop sparc64,ftrace: Remove check of obsolete variable function_trace_stop tile: ftrace: Remove check of obsolete variable function_trace_stop ftrace: x86: Remove check of obsolete variable function_trace_stop ...
2014-07-28s390/irq: improve displayed interrupt order in /proc/interruptsHendrik Brueckner1-45/+50
Rework the irqclass_main_desc and irqclass_sub_desc data structures which are used to report detaild IRQ statistics in /proc/interrupts. When called from the procfs ops, the entries in the structures are processed one by one. The index of an IRQ in the structures is identical to its definition in the "enum interruption_class". To control and (re)order the displayed sequence, introduce an irq member in each entry. This helps to display related IRQs together without changing the assigned number in the interruption_class enumeration. That means, adding and displaying new IRQs are independent. Finally, this new behavior improves to maintain a kernel ABI. Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-07-28Merge tag 'v3.16-rc7' into perf/core, to merge in the latest fixes before ↵Ingo Molnar2-5/+13
applying new changes Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-07-23timekeeping: Create struct tk_read_base and use it in struct timekeeperThomas Gleixner1-8/+8
The members of the new struct are the required ones for the new NMI safe accessor to clcok monotonic. In order to reuse the existing timekeeping code and to make the update of the fast NMI safe timekeepers a simple memcpy use the struct for the timekeeper as well and convert all users. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Signed-off-by: John Stultz <john.stultz@linaro.org>
2014-07-23clocksource: Get rid of cycle_lastThomas Gleixner1-1/+1
cycle_last was added to the clocksource to support the TSC validation. We moved that to the core code, so we can get rid of the extra copy. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: John Stultz <john.stultz@linaro.org>
2014-07-22s390/kdump: Return NOTIFY_OK for all actions other than MEM_GOING_OFFLINEMichael Holzheu1-0/+2
We only have to check kdump memory for the MEM_GOING_OFFLINE action. Therefore skip the test and return NOTIFY_OK for all other memory hotplug actions. Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-07-18s390/ftrace: remove check of obsolete variable function_trace_stopHeiko Carstens2-10/+3
Remove check of obsolete variable function_trace_stop as requested by Steven Rostedt. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-07-16s390/ptrace: fix PSW mask checkMartin Schwidefsky1-2/+10
The PSW mask check of the PTRACE_POKEUSR_AREA command is incorrect. The PSW_MASK_USER define contains the PSW_MASK_ASC bits, the ptrace interface accepts all combinations for the address-space-control bits. To protect the kernel space the PSW mask check in ptrace needs to reject the address-space-control bit combination for home space. Fixes CVE-2014-3534 Cc: stable@vger.kernel.org Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-07-16s390: require mvcos facility, not tod clock steering facilityDavid Hildenbrand1-3/+3
Inlined uaccess functions require the mvcos facility (bit 27), not the tod clock steering facility (bit 28) for z10 and newer machines. Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-06-25Merge branch 'perf/urgent' into perf/core, to pick up fixes and refresh the ↵Ingo Molnar1-1/+3
branch Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-06-19s390, perf: Use common PMU interrupt disabled codeVince Weaver1-6/+6
Transition to using the new generic PERF_PMU_CAP_NO_INTERRUPT method for failing a sampling event when no PMU interrupt is available. Signed-off-by: Vince Weaver <vincent.weaver@maine.edu> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Thomas Huth <thuth@linux.vnet.ibm.com> Cc: linux390@de.ibm.com Cc: linux-s390@vger.kernel.org Link: http://lkml.kernel.org/r/alpine.DEB.2.10.1406150204290.16738@vincent-weaver-1.umelst.maine.edu Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-06-16s390/compat: correct ucontext layout for high gprsMartin Schwidefsky1-1/+3
The uc_sigmask definition in the kernel differs from the one in the glibc, the kernel uc_sigmask has 64 bits while the glibc verison is 1024 bits. The extension of the ucontext structure for 64-bit register support for 31-bit compat processes added a new field uc_gprs_high which starts 8 bytes after the uc_sigmask field. As the glibc view of the ucontext assumes a size of 128 bytes for uc_sigmask add a 120 byte padding to the kernel structure ucontext_extended after the 8 byte uc_sigmask. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-06-04Merge branch 'irq-core-for-linus' of ↵Linus Torvalds1-3/+2
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into next Pull core irq updates from Thomas Gleixner: "The irq department delivers: - Another tree wide update to get rid of the horrible create_irq interface along with its even more horrible variants. That also gets rid of the last leftovers of the initial sparse irq hackery. arch/driver specific changes have been either acked or ignored. - A fix for the spurious interrupt detection logic with threaded interrupts. - A new ARM SoC interrupt controller - The usual pile of fixes and improvements all over the place" * 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (40 commits) Documentation: brcmstb-l2: Add Broadcom STB Level-2 interrupt controller binding irqchip: brcmstb-l2: Add Broadcom Set Top Box Level-2 interrupt controller genirq: Improve documentation to match current implementation ARM: iop13xx: fix msi support with sparse IRQ genirq: Provide !SMP stub for irq_set_affinity_notifier() irqchip: armada-370-xp: Move the devicetree binding documentation irqchip: gic: Use mask field in GICC_IAR genirq: Remove dynamic_irq mess ia64: Use irq_init_desc genirq: Replace dynamic_irq_init/cleanup genirq: Remove irq_reserve_irq[s] genirq: Replace reserve_irqs in core code s390: Avoid call to irq_reserve_irqs() s390: Remove pointless arch_show_interrupts() s390: pci: Check return value of alloc_irq_desc() proper sh: intc: Remove pointless irq_reserve_irqs() invocation x86, irq: Remove pointless irq_reserve_irqs() call genirq: Make create/destroy_irq() ia64 private tile: Use SPARSE_IRQ tile: pci: Use irq_alloc/free_hwirq() ...
2014-06-04Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm into nextLinus Torvalds3-7/+15
Pull KVM updates from Paolo Bonzini: "At over 200 commits, covering almost all supported architectures, this was a pretty active cycle for KVM. Changes include: - a lot of s390 changes: optimizations, support for migration, GDB support and more - ARM changes are pretty small: support for the PSCI 0.2 hypercall interface on both the guest and the host (the latter acked by Catalin) - initial POWER8 and little-endian host support - support for running u-boot on embedded POWER targets - pretty large changes to MIPS too, completing the userspace interface and improving the handling of virtualized timer hardware - for x86, a larger set of changes is scheduled for 3.17. Still, we have a few emulator bugfixes and support for running nested fully-virtualized Xen guests (para-virtualized Xen guests have always worked). And some optimizations too. The only missing architecture here is ia64. It's not a coincidence that support for KVM on ia64 is scheduled for removal in 3.17" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (203 commits) KVM: add missing cleanup_srcu_struct KVM: PPC: Book3S PR: Rework SLB switching code KVM: PPC: Book3S PR: Use SLB entry 0 KVM: PPC: Book3S HV: Fix machine check delivery to guest KVM: PPC: Book3S HV: Work around POWER8 performance monitor bugs KVM: PPC: Book3S HV: Make sure we don't miss dirty pages KVM: PPC: Book3S HV: Fix dirty map for hugepages KVM: PPC: Book3S HV: Put huge-page HPTEs in rmap chain for base address KVM: PPC: Book3S HV: Fix check for running inside guest in global_invalidates() KVM: PPC: Book3S: Move KVM_REG_PPC_WORT to an unused register number KVM: PPC: Book3S: Add ONE_REG register names that were missed KVM: PPC: Add CAP to indicate hcall fixes KVM: PPC: MPIC: Reset IRQ source private members KVM: PPC: Graciously fail broken LE hypercalls PPC: ePAPR: Fix hypercall on LE guest KVM: PPC: BOOK3S: Remove open coded make_dsisr in alignment handler KVM: PPC: BOOK3S: Always use the saved DAR value PPC: KVM: Make NX bit available with magic page KVM: PPC: Disable NX for old magic page using guests KVM: PPC: BOOK3S: HV: Add mixed page-size support for guest ...
2014-06-03Merge branch 'sched-core-for-linus' of ↵Linus Torvalds1-0/+20
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into next Pull scheduler updates from Ingo Molnar: "The main scheduling related changes in this cycle were: - various sched/numa updates, for better performance - tree wide cleanup of open coded nice levels - nohz fix related to rq->nr_running use - cpuidle changes and continued consolidation to improve the kernel/sched/idle.c high level idle scheduling logic. As part of this effort I pulled cpuidle driver changes from Rafael as well. - standardized idle polling amongst architectures - continued work on preparing better power/energy aware scheduling - sched/rt updates - misc fixlets and cleanups" * 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (49 commits) sched/numa: Decay ->wakee_flips instead of zeroing sched/numa: Update migrate_improves/degrades_locality() sched/numa: Allow task switch if load imbalance improves sched/rt: Fix 'struct sched_dl_entity' and dl_task_time() comments, to match the current upstream code sched: Consolidate open coded implementations of nice level frobbing into nice_to_rlimit() and rlimit_to_nice() sched: Initialize rq->age_stamp on processor start sched, nohz: Change rq->nr_running to always use wrappers sched: Fix the rq->next_balance logic in rebalance_domains() and idle_balance() sched: Use clamp() and clamp_val() to make sys_nice() more readable sched: Do not zero sg->cpumask and sg->sgp->power in build_sched_groups() sched/numa: Fix initialization of sched_domain_topology for NUMA sched: Call select_idle_sibling() when not affine_sd sched: Simplify return logic in sched_read_attr() sched: Simplify return logic in sched_copy_attr() sched: Fix exec_start/task_hot on migrated tasks arm64: Remove TIF_POLLING_NRFLAG metag: Remove TIF_POLLING_NRFLAG sched/idle: Make cpuidle_idle_call() void sched/idle: Reflow cpuidle_idle_call() sched/idle: Delay clearing the polling bit ...
2014-05-28s390/lowcore: replace lowcore irb array with a per-cpu variableMartin Schwidefsky1-1/+0
Remove the 96-byte irb array from the lowcore and create a per-cpu variable instead. That way we will pick up any change in the definition of the struct irb automatically. Acked-By: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-05-28s390/facilities: remove extract-cpu-time facility checkHeiko Carstens1-4/+4
Remove the check for the extract-cpu-time facility within early startup code. Both kernel and user space work if the facility is not installed. The vdso code has a run time check if the ectg is available. Besides that there is no known user. Reported-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-05-27s390: require mvcos facility for z10 and newer machinesHeiko Carstens1-3/+3
With inlined uaccess functions we always need the mvcos facility. Checking at each inline place if mvcos is available would make the inlining of get_user/put_user pointless. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-05-27s390/time: cast tv_nsec to u64 prior to shift in update_vsyscallMartin Schwidefsky1-1/+1
Analog to git commit 28b92e09e25bdc0ae864b22eacf195a74f861389 first cast tk->wall_to_monotonic.tv_nsec to u64 before doing the shift with tk->shift to avoid loosing relevant bits on a 32-bit kernel. Cc: stable@vger.kernel.org # 3.13+ Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-05-20s390: split TIF bits into CIF, PIF and TIF bitsMartin Schwidefsky8-98/+105
The oi and ni instructions used in entry[64].S to set and clear bits in the thread-flags are not guaranteed to be atomic in regard to other CPUs. Split the TIF bits into CPU, pt_regs and thread-info specific bits. Updates on the TIF bits are done with atomic instructions, updates on CPU and pt_regs bits are done with non-atomic instructions. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-05-20s390/uaccess: simplify control register updatesMartin Schwidefsky2-2/+2
Always switch to the kernel ASCE in switch_mm. Load the secondary space ASCE in finish_arch_post_lock_switch after checking that any pending page table operations have completed. The primary ASCE is loaded in entry[64].S. With this the update_primary_asce call can be removed from the switch_to macro and from the start of switch_mm function. Remove the load_primary argument from update_user_asce/clear_user_asce, rename update_user_asce to set_user_asce and rename update_primary_asce to load_kernel_asce. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-05-20s390/smp: Avoid busy loop after halt and "begin" on z/VMMichael Holzheu1-9/+0
Currently the smp_stop_cpu() function for SMP kernels enters a busy loop when "begin" is entered on the z/VM console after Linux is halted. To avoid this behavior, use the non-SMP variant of smp_stop_cpu() which stops the CPU again after "begin" is entered. As a side effect we now have consistent behavior for SMP and non-SMP Linux. Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-05-20s390/dump: Remove CONFIG_ZFCPDUMPMichael Holzheu2-8/+6
Currently there are two s390 kernel dump config options "CONFIG_ZFCPDUMP" and "CONFIG_CRASH_DUMP". In order to keep things simple and because the "CONFIG_ZFCPDUMP" option already has a dependency to "CONFIG_CRASH_DUMP" remove the CONFIG_ZFCPDUMP option. Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com> Reviewed-by: Eric Farman <farman@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-05-20s390/spinlock: optimize spinlock code sequencePhilipp Hachtmann2-0/+7
Use lowcore constant to improve the code generated for spinlocks. [ Martin Schwidefsky: patch breakdown and code beautification ] Signed-off-by: Philipp Hachtmann <phacht@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-05-20s390/mm: Convert bootmem to memblockPhilipp Hachtmann5-337/+208
The original bootmem allocator is getting replaced by memblock. To cover the needs of the s390 kdump implementation the physical memory list is used. With this patch the bootmem allocator and its bitmaps are completely removed from s390. Signed-off-by: Philipp Hachtmann <phacht@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-05-16s390: Avoid call to irq_reserve_irqs()Thomas Gleixner1-1/+5
There is no need to mark the lower interrupts as reserved in order to exclude them from dynamic allocation. Provide arch_dynirq_lower_bound() to exclude the lower space. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Grant Likely <grant.likely@linaro.org> Cc: Tony Luck <tony.luck@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: linux390@de.ibm.com Link: http://lkml.kernel.org/r/20140507154339.811205235@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-05-16s390: Remove pointless arch_show_interrupts()Thomas Gleixner1-5/+0
S390 is not using the generic show interrupts implementation so the extra arch_show_interrupts() is just useless. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Grant Likely <grant.likely@linaro.org> Cc: Tony Luck <tony.luck@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: linux390@de.ibm.com Link: http://lkml.kernel.org/r/20140507154339.609149081@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-05-07sched, s390: Create a dedicated topology tableVincent Guittot1-0/+20
BOOK level is only relevant for s390 so we create a dedicated topology table with BOOK level and remove it from default table. Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Philipp Hachtmann <phacht@linux.vnet.ibm.com> Cc: cmetcalf@tilera.com Cc: benh@kernel.crashing.org Cc: dietmar.eggemann@arm.com Cc: preeti@linux.vnet.ibm.com Cc: tony.luck@intel.com Cc: fenghua.yu@intel.com Cc: linux390@de.ibm.com Cc: linux-s390@vger.kernel.org Link: http://lkml.kernel.org/r/1397209481-28542-3-git-send-email-vincent.guittot@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-04-22s390: add fields to lowcore definitionJens Freimann1-0/+7
This patch adds fields which are currently missing but needed for the correct injection of interrupts. This is based on a patch by David Hildenbrand Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-04-22s390: rename and split lowcore field per_perc_atmidJens Freimann3-6/+7
per_perc_atmid is currently a two-byte field that combines two fields, the PER code and the PER Addressing-and-Translation-Mode Identification (ATMID) Let's make them accessible indepently and also rename per_cause to per_code. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-04-22s390: fix name of lowcore field at offset 0xa3Jens Freimann1-1/+1
According to the Principles of Operation, at offset 0xA3 in the lowcore we have the "Architectural-Mode identification", not an "access identification". Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-04-11s390/compat: fix typoHeiko Carstens1-1/+1
Reported-by: Michael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-04-11s390: add 31 bit warning messageHeiko Carstens1-0/+32
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-04-11s390: wire up sys_renameat2Heiko Carstens2-0/+2
Actually this also enable sys_setattr and sys_getattr, since I forgot to increase NR_syscalls when adding those syscalls. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-04-11s390: show_registers() should not map user space addresses to kernel symbolsHeiko Carstens1-4/+4
It doesn't make sense to map user space addresses to kernel symbols when show_registers() prints a user space psw. So just skip the translation part if a user space psw is handled. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-04-09s390/smp: fix smp_stop_cpu() for !CONFIG_SMPHeiko Carstens1-15/+0
smp_stop_cpu() should stop the current cpu even for !CONFIG_SMP. Otherwise machine_halt() will return and and the machine generates a panic instread of simply stopping the current cpu: Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000000 CPU: 0 PID: 1 Comm: systemd-shutdow Not tainted 3.14.0-01527-g2b6ef16a6bc5 #10 [...] Call Trace: ([<0000000000110db0>] show_trace+0xf8/0x158) [<0000000000110e7a>] show_stack+0x6a/0xe8 [<000000000074dba8>] panic+0xe4/0x268 [<0000000000140570>] do_exit+0xa88/0xb2c [<000000000016e12c>] SyS_reboot+0x1f0/0x234 [<000000000075da70>] sysc_nr_ok+0x22/0x28 [<000000007d5a09b4>] 0x7d5a09b4 Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-04-09s390: fix control register updateMartin Schwidefsky1-1/+1
The git commit c63badebfebacdba827ab1cc1d420fc81bd8d818 "s390: optimize control register update" broke the update for control register 0. After the update do the lctlg from the correct value. Cc: <stable@vger.kernel.org> # 3.14 Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-04-08Merge branch 'for-linus' of ↵Linus Torvalds11-21/+76
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull second set of s390 patches from Martin Schwidefsky: "The second part of Heikos uaccess rework, the page table walker for uaccess is now a thing of the past (yay!) The code change to fix the theoretical TLB flush problem allows us to add a TLB flush optimization for zEC12, this machine has new instructions that allow to do CPU local TLB flushes for single pages and for all pages of a specific address space. Plus the usual bug fixing and some more cleanup" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/uaccess: rework uaccess code - fix locking issues s390/mm,tlb: optimize TLB flushing for zEC12 s390/mm,tlb: safeguard against speculative TLB creation s390/irq: Use defines for external interruption codes s390/irq: Add defines for external interruption codes s390/sclp: add timeout for queued requests kvm/s390: also set guest pages back to stable on kexec/kdump lcs: Add missing destroy_timer_on_stack() s390/tape: Add missing destroy_timer_on_stack() s390/tape: Use del_timer_sync() s390/3270: fix crash with multiple reset device requests s390/bitops,atomic: add missing memory barriers s390/zcrypt: add length check for aligned data to avoid overflow in msg-type 6
2014-04-07Merge tag 'cpu-hotplug-3.15-rc1' of ↵Linus Torvalds2-5/+13
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull CPU hotplug notifiers registration fixes from Rafael Wysocki: "The purpose of this single series of commits from Srivatsa S Bhat (with a small piece from Gautham R Shenoy) touching multiple subsystems that use CPU hotplug notifiers is to provide a way to register them that will not lead to deadlocks with CPU online/offline operations as described in the changelog of commit 93ae4f978ca7f ("CPU hotplug: Provide lockless versions of callback registration functions"). The first three commits in the series introduce the API and document it and the rest simply goes through the users of CPU hotplug notifiers and converts them to using the new method" * tag 'cpu-hotplug-3.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (52 commits) net/iucv/iucv.c: Fix CPU hotplug callback registration net/core/flow.c: Fix CPU hotplug callback registration mm, zswap: Fix CPU hotplug callback registration mm, vmstat: Fix CPU hotplug callback registration profile: Fix CPU hotplug callback registration trace, ring-buffer: Fix CPU hotplug callback registration xen, balloon: Fix CPU hotplug callback registration hwmon, via-cputemp: Fix CPU hotplug callback registration hwmon, coretemp: Fix CPU hotplug callback registration thermal, x86-pkg-temp: Fix CPU hotplug callback registration octeon, watchdog: Fix CPU hotplug callback registration oprofile, nmi-timer: Fix CPU hotplug callback registration intel-idle: Fix CPU hotplug callback registration clocksource, dummy-timer: Fix CPU hotplug callback registration drivers/base/topology.c: Fix CPU hotplug callback registration acpi-cpufreq: Fix CPU hotplug callback registration zsmalloc: Fix CPU hotplug callback registration scsi, fcoe: Fix CPU hotplug callback registration scsi, bnx2fc: Fix CPU hotplug callback registration scsi, bnx2i: Fix CPU hotplug callback registration ...
2014-04-03Merge tag 'trace-3.15' of ↵Linus Torvalds1-2/+1
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing updates from Steven Rostedt: "Most of the changes were largely clean ups, and some documentation. But there were a few features that were added: Uprobes now work with event triggers and multi buffers and have support under ftrace and perf. The big feature is that the function tracer can now be used within the multi buffer instances. That is, you can now trace some functions in one buffer, others in another buffer, all functions in a third buffer and so on. They are basically agnostic from each other. This only works for the function tracer and not for the function graph trace, although you can have the function graph tracer running in the top level buffer (or any tracer for that matter) and have different function tracing going on in the sub buffers" * tag 'trace-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (45 commits) tracing: Add BUG_ON when stack end location is over written tracepoint: Remove unused API functions Revert "tracing: Move event storage for array from macro to standalone function" ftrace: Constify ftrace_text_reserved tracepoints: API doc update to tracepoint_probe_register() return value tracepoints: API doc update to data argument ftrace: Fix compilation warning about control_ops_free ftrace/x86: BUG when ftrace recovery fails ftrace: Warn on error when modifying ftrace function ftrace: Remove freelist from struct dyn_ftrace ftrace: Do not pass data to ftrace_dyn_arch_init ftrace: Pass retval through return in ftrace_dyn_arch_init() ftrace: Inline the code from ftrace_dyn_table_alloc() ftrace: Cleanup of global variables ftrace_new_pgs and ftrace_update_cnt tracing: Evaluate len expression only once in __dynamic_array macro tracing: Correctly expand len expressions from __dynamic_array macro tracing/module: Replace include of tracepoint.h with jump_label.h in module.h tracing: Fix event header migrate.h to include tracepoint.h tracing: Fix event header writeback.h to include tracepoint.h tracing: Warn if a tracepoint is not set via debugfs ...
2014-04-03s390/uaccess: rework uaccess code - fix locking issuesHeiko Carstens3-4/+45
The current uaccess code uses a page table walk in some circumstances, e.g. in case of the in atomic futex operations or if running on old hardware which doesn't support the mvcos instruction. However it turned out that the page table walk code does not correctly lock page tables when accessing page table entries. In other words: a different cpu may invalidate a page table entry while the current cpu inspects the pte. This may lead to random data corruption. Adding correct locking however isn't trivial for all uaccess operations. Especially copy_in_user() is problematic since that requires to hold at least two locks, but must be protected against ABBA deadlock when a different cpu also performs a copy_in_user() operation. So the solution is a different approach where we change address spaces: User space runs in primary address mode, or access register mode within vdso code, like it currently already does. The kernel usually also runs in home space mode, however when accessing user space the kernel switches to primary or secondary address mode if the mvcos instruction is not available or if a compare-and-swap (futex) instruction on a user space address is performed. KVM however is special, since that requires the kernel to run in home address space while implicitly accessing user space with the sie instruction. So we end up with: User space: - runs in primary or access register mode - cr1 contains the user asce - cr7 contains the user asce - cr13 contains the kernel asce Kernel space: - runs in home space mode - cr1 contains the user or kernel asce -> the kernel asce is loaded when a uaccess requires primary or secondary address mode - cr7 contains the user or kernel asce, (changed with set_fs()) - cr13 contains the kernel asce In case of uaccess the kernel changes to: - primary space mode in case of a uaccess (copy_to_user) and uses e.g. the mvcp instruction to access user space. However the kernel will stay in home space mode if the mvcos instruction is available - secondary space mode in case of futex atomic operations, so that the instructions come from primary address space and data from secondary space In case of kvm the kernel runs in home space mode, but cr1 gets switched to contain the gmap asce before the sie instruction gets executed. When the sie instruction is finished cr1 will be switched back to contain the user asce. A context switch between two processes will always load the kernel asce for the next process in cr1. So the first exit to user space is a bit more expensive (one extra load control register instruction) than before, however keeps the code rather simple. In sum this means there is no need to perform any error prone page table walks anymore when accessing user space. The patch seems to be rather large, however it mainly removes the the page table walk code and restores the previously deleted "standard" uaccess code, with a couple of changes. The uaccess without mvcos mode can be enforced with the "uaccess_primary" kernel parameter. Reported-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-04-03s390/mm,tlb: optimize TLB flushing for zEC12Martin Schwidefsky2-0/+8
The zEC12 machines introduced the local-clearing control for the IDTE and IPTE instruction. If the control is set only the TLB of the local CPU is cleared of entries, either all entries of a single address space for IDTE, or the entry for a single page-table entry for IPTE. Without the local-clearing control the TLB flush is broadcasted to all CPUs in the configuration, which is expensive. The reset of the bit mask of the CPUs that need flushing after a non-local IDTE is tricky. As TLB entries for an address space remain in the TLB even if the address space is detached a new bit field is required to keep track of attached CPUs vs. CPUs in the need of a flush. After a non-local flush with IDTE the bit-field of attached CPUs is copied to the bit-field of CPUs in need of a flush. The ordering of operations on cpu_attach_mask, attach_count and mm_cpumask(mm) is such that an underindication in mm_cpumask(mm) is prevented but an overindication in mm_cpumask(mm) is possible. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-04-03s390/irq: Use defines for external interruption codesThomas Huth7-17/+23
Use the new defines for external interruption codes to get rid of "magic" numbers in the s390 source code. And while we're at it, also rename the (un-)register_external_interrupt function to something shorter so that this patch does not exceed the 80 columns all over the place. Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-04-02Merge tag 'kvm-3.15-1' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds1-0/+1
Pull kvm updates from Paolo Bonzini: "PPC and ARM do not have much going on this time. Most of the cool stuff, instead, is in s390 and (after a few releases) x86. ARM has some caching fixes and PPC has transactional memory support in guests. MIPS has some fixes, with more probably coming in 3.16 as QEMU will soon get support for MIPS KVM. For x86 there are optimizations for debug registers, which trigger on some Windows games, and other important fixes for Windows guests. We now expose to the guest Broadwell instruction set extensions and also Intel MPX. There's also a fix/workaround for OS X guests, nested virtualization features (preemption timer), and a couple kvmclock refinements. For s390, the main news is asynchronous page faults, together with improvements to IRQs (floating irqs and adapter irqs) that speed up virtio devices" * tag 'kvm-3.15-1' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (96 commits) KVM: PPC: Book3S HV: Save/restore host PMU registers that are new in POWER8 KVM: PPC: Book3S HV: Fix decrementer timeouts with non-zero TB offset KVM: PPC: Book3S HV: Don't use kvm_memslots() in real mode KVM: PPC: Book3S HV: Return ENODEV error rather than EIO KVM: PPC: Book3S: Trim top 4 bits of physical address in RTAS code KVM: PPC: Book3S HV: Add get/set_one_reg for new TM state KVM: PPC: Book3S HV: Add transactional memory support KVM: Specify byte order for KVM_EXIT_MMIO KVM: vmx: fix MPX detection KVM: PPC: Book3S HV: Fix KVM hang with CONFIG_KVM_XICS=n KVM: PPC: Book3S: Introduce hypervisor call H_GET_TCE KVM: PPC: Book3S HV: Fix incorrect userspace exit on ioeventfd write KVM: s390: clear local interrupts at cpu initial reset KVM: s390: Fix possible memory leak in SIGP functions KVM: s390: fix calculation of idle_mask array size KVM: s390: randomize sca address KVM: ioapic: reinject pending interrupts on KVM_SET_IRQCHIP KVM: Bump KVM_MAX_IRQ_ROUTES for s390 KVM: s390: irq routing for adapter interrupts. KVM: s390: adapter interrupt sources ...
generated by cgit v1.2.3 (git 2.39.1) at 2024-08-27 15:24:09 +0000