summaryrefslogtreecommitdiffstats
path: root/arch/s390/kernel
AgeCommit message (Collapse)AuthorFilesLines
2019-02-22s390/cpum_cf: rename per-CPU counter facility structure and variablesHendrik Brueckner1-20/+20
Rename the struct cpu_hw_events to cpu_cf_events and also the respective per-CPU variable to make its name more clear. No functional changes. Signed-off-by: Hendrik Brueckner <brueckner@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2019-02-22s390/cpum_cf: prepare for in-kernel counter measurementsHendrik Brueckner1-6/+26
Prepare the counter facility support to be used by other in-kernel users. The first step introduces the __kernel_cpumcf_begin() and __kernel_cpumcf_end() functions to reserve the counter facility for doing measurements and to release after the measurements are done. Signed-off-by: Hendrik Brueckner <brueckner@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2019-02-22s390/cpum_cf: move counter set controls to a new header fileHendrik Brueckner2-42/+4
Move counter set specific controls and functions to the asm/cpu_mcf.h header file containg all counter facility support definitions. Also adapt few variable names and header file includes. No functional changes. Signed-off-by: Hendrik Brueckner <brueckner@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2019-02-20s390/setup: fix boot crash for machine without EDAT-1Martin Schwidefsky1-7/+6
The fix to make WARN work in the early boot code created a problem on older machines without EDAT-1. The setup_lowcore_dat_on function uses the pointer from lowcore_ptr[0] to set the DAT bit in the new PSWs. That does not work if the kernel page table is set up with 4K pages as the prefix address maps to absolute zero. To make this work the PSWs need to be changed with via address 0 in form of the S390_lowcore definition. Reported-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Cornelia Huck <cohuck@redhat.com> Fixes: 94f85ed3e2f8 ("s390/setup: fix early warning messages") Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2019-02-20s390/setup: fix early warning messagesMartin Schwidefsky1-9/+23
The setup_lowcore() function creates a new prefix page for the boot CPU. The PSW mask for the system_call, external interrupt, i/o interrupt and the program check handler have the DAT bit set in this new prefix page. At the time setup_lowcore is called the system still runs without virtual address translation, the paging_init() function creates the kernel page table and loads the CR13 with the kernel ASCE. Any code between setup_lowcore() and the end of paging_init() that has a BUG or WARN statement will create a program check that can not be handled correctly as there is no kernel page table yet. To allow early WARN statements initially setup the lowcore with DAT off and set the DAT bit only after paging_init() has completed. Cc: stable@vger.kernel.org Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2019-02-07s390: remove unused including <linux/version.h>YueHaibing1-1/+0
Remove including <linux/version.h> that don't need it. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2019-02-07s390: remove dead codeGerald Schaefer1-2/+0
Remove some dead code from head64.S, which was left over since commit da292bbe1f62 ("[S390] eliminate ipl_device from lowcore") removed ipl_device from lowcore. Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2019-02-07s390/setup: remove obsolete #ifdefGerald Schaefer1-9/+0
The #ifdef CONFIG_DMA_API_DEBUG check in reserve_kernel() is no longer needed, since commit ea535e418c01 ("dma-debug: switch check from _text to _stext") changed the logic in lib/dma-debug.c, so remove it. Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2019-01-28s390: no need to check return value of debugfs_create functionsGreg Kroah-Hartman3-10/+0
When calling debugfs functions, there is no need to ever check the return value. The function can work or not, but the code logic should never do something different based on this. Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Kees Cook <keescook@chromium.org> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Cc: linux-s390@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2019-01-28s390/setup: set control program code via diag 318Collin Walling2-0/+22
The s390x diagnose 318 instruction sets the control program name code (CPNC) and control program version code (CPVC) to provide useful information regarding the OS during debugging. The CPNC is explicitly set to 4 to indicate a Linux/KVM environment. The CPVC is a 7-byte value containing: - 3-byte Linux version code, currently set to 0 - 3-byte unique value, currently set to 0 - 1-byte trailing null Signed-off-by: Collin Walling <walling@linux.ibm.com> Acked-by: Janosch Frank <frankja@linux.ibm.com> Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Message-Id: <1544135405-22385-2-git-send-email-walling@linux.ibm.com> [set version code to 0 until the structure is fully defined] Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2019-01-18s390: remove compat_wrapper.cArnd Bergmann3-326/+140
Now that all these wrappers are automatically generated, we can remove the entire file, and instead point to the regualar syscalls like all other architectures do. The 31-bit pointer extension is now handled in the __s390_sys_*() wrappers. Link: https://lore.kernel.org/lkml/20190116131527.2071570-6-arnd@arndb.de Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2019-01-18s390: autogenerate compat syscall wrappersArnd Bergmann3-21/+11
Any system call that takes a pointer argument on s390 requires a wrapper function to do a 31-to-64 zero-extension, these are currently generated in arch/s390/kernel/compat_wrapper.c. On arm64 and x86, we already generate similar wrappers for all system calls in the place of their definition, just for a different purpose (they load the arguments from pt_regs). We can do the same thing here, by adding an asm/syscall_wrapper.h file with a copy of all the relevant macros to override the generic version. Besides the addition of the compat entry point, these also rename the entry points with a __s390_ or __s390x_ prefix, similar to what we do on arm64 and x86. This in turn requires renaming a few things, and adding a proper ni_syscall() entry point. In order to still compile system call definitions that pass an loff_t argument, the __SC_COMPAT_CAST() macro checks for that and forces an -ENOSYS error, which was the best I could come up with. Those functions must obviously not get called from user space, but instead require hand-written compat_sys_*() handlers, which fortunately already exist. Link: https://lore.kernel.org/lkml/20190116131527.2071570-5-arnd@arndb.de Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> [heiko.carstens@de.ibm.com: compile fix for !CONFIG_COMPAT] Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2019-01-18s390: use generic UID16 implementationArnd Bergmann3-252/+34
s390 has an almost identical copy of the code in kernel/uid16.c. The problem here is that it requires calling the regular system calls, which the generic implementation handles correctly, but the internal interfaces are not declared in a global header for this. The best way forward here seems to be to just use the generic code and delete the s390 specific implementation. I keep the changes to uapi/asm/posix_types.h inside of an #ifdef check so user space does not observe any changes. As some of the system calls pass pointers, we also need wrappers in compat_wrapper.c, which I add for all calls with at least one argument. All those wrappers can be removed in a later step. Link: https://lore.kernel.org/lkml/20190116131527.2071570-4-arnd@arndb.de Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2019-01-18ipc: introduce ksys_ipc()/compat_ksys_ipc() for s390Arnd Bergmann2-2/+4
The sys_ipc() and compat_ksys_ipc() functions are meant to only be used from the system call table, not called by another function. Introduce ksys_*() interfaces for this purpose, as we have done for many other system calls. Link: https://lore.kernel.org/lkml/20190116131527.2071570-3-arnd@arndb.de Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> [heiko.carstens@de.ibm.com: compile fix for !CONFIG_COMPAT] Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2019-01-18s390: open-code s390_personality syscallArnd Bergmann1-2/+5
Patch series "s390: rework compat wrapper generation". As promised, I gave this a go and changed the SYSCALL_DEFINEx() infrastructure to always include the wrappers for doing the 31-bit argument conversion on s390 compat mode. This does three main things: - The UID16 rework saved a lot of duplicated code, and would probably make sense by itself, but is also required as we can no longer call sys_*() functions directly after the last step. - Removing the compat_wrapper.c file is of course the main goal here, in order to remove the need to maintain the compat_wrapper.c file when new system calls get added. Unfortunately, this requires adding some complexity in syscall_wrapper.h, and trades a small reduction in source code lines for a small increase in binary size for unused wrappers. - As an added benefit, the use of syscall_wrapper.h now makes it easy to change the syscall wrappers so they no longer see all user space register contents, similar to changes done in commits fa697140f9a2 ("syscalls/x86: Use 'struct pt_regs' based syscall calling convention for 64-bit syscalls") and 4378a7d4be30 ("arm64: implement syscall wrappers"). I leave the actual implementation of this for you, if you want to do it later. I did not test the changes at runtime, but I looked at the generated object code, which seems fine here and includes the same conversions as before. This patch(of 5): The sys_personality function is not meant to be called from other system calls. We could introduce an intermediate ksys_personality function, but it does almost nothing, so this just moves the implementation into the caller. Link: https://lore.kernel.org/lkml/20190116131527.2071570-1-arnd@arndb.de Link: https://lore.kernel.org/lkml/20190116131527.2071570-2-arnd@arndb.de Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2019-01-06kbuild: use assignment instead of define ... endef for filechk_* rulesMasahiro Yamada1-9/+3
You do not have to use define ... endef for filechk_* rules. For simple cases, the use of assignment looks cleaner, IMHO. I updated the usage for scripts/Kbuild.include in case somebody misunderstands the 'define ... endif' is the requirement. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2019-01-06jump_label: move 'asm goto' support test to KconfigMasahiro Yamada2-5/+2
Currently, CONFIG_JUMP_LABEL just means "I _want_ to use jump label". The jump label is controlled by HAVE_JUMP_LABEL, which is defined like this: #if defined(CC_HAVE_ASM_GOTO) && defined(CONFIG_JUMP_LABEL) # define HAVE_JUMP_LABEL #endif We can improve this by testing 'asm goto' support in Kconfig, then make JUMP_LABEL depend on CC_HAS_ASM_GOTO. Ugly #ifdef HAVE_JUMP_LABEL will go away, and CONFIG_JUMP_LABEL will match to the real kernel capability. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc) Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
2019-01-02Merge branch 'next-seccomp' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security Pull seccomp updates from James Morris: - Add SECCOMP_RET_USER_NOTIF - seccomp fixes for sparse warnings and s390 build (Tycho) * 'next-seccomp' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: seccomp, s390: fix build for syscall type change seccomp: fix poor type promotion samples: add an example of seccomp user trap seccomp: add a return code to trap to userspace seccomp: switch system call argument type to void * seccomp: hoist struct seccomp_data recalculation higher
2018-12-25Merge tag 'arm64-upstream' of ↵Linus Torvalds1-10/+0
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 festive updates from Will Deacon: "In the end, we ended up with quite a lot more than I expected: - Support for ARMv8.3 Pointer Authentication in userspace (CRIU and kernel-side support to come later) - Support for per-thread stack canaries, pending an update to GCC that is currently undergoing review - Support for kexec_file_load(), which permits secure boot of a kexec payload but also happens to improve the performance of kexec dramatically because we can avoid the sucky purgatory code from userspace. Kdump will come later (requires updates to libfdt). - Optimisation of our dynamic CPU feature framework, so that all detected features are enabled via a single stop_machine() invocation - KPTI whitelisting of Cortex-A CPUs unaffected by Meltdown, so that they can benefit from global TLB entries when KASLR is not in use - 52-bit virtual addressing for userspace (kernel remains 48-bit) - Patch in LSE atomics for per-cpu atomic operations - Custom preempt.h implementation to avoid unconditional calls to preempt_schedule() from preempt_enable() - Support for the new 'SB' Speculation Barrier instruction - Vectorised implementation of XOR checksumming and CRC32 optimisations - Workaround for Cortex-A76 erratum #1165522 - Improved compatibility with Clang/LLD - Support for TX2 system PMUS for profiling the L3 cache and DMC - Reflect read-only permissions in the linear map by default - Ensure MMIO reads are ordered with subsequent calls to Xdelay() - Initial support for memory hotplug - Tweak the threshold when we invalidate the TLB by-ASID, so that mremap() performance is improved for ranges spanning multiple PMDs. - Minor refactoring and cleanups" * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (125 commits) arm64: kaslr: print PHYS_OFFSET in dump_kernel_offset() arm64: sysreg: Use _BITUL() when defining register bits arm64: cpufeature: Rework ptr auth hwcaps using multi_entry_cap_matches arm64: cpufeature: Reduce number of pointer auth CPU caps from 6 to 4 arm64: docs: document pointer authentication arm64: ptr auth: Move per-thread keys from thread_info to thread_struct arm64: enable pointer authentication arm64: add prctl control for resetting ptrauth keys arm64: perf: strip PAC when unwinding userspace arm64: expose user PAC bit positions via ptrace arm64: add basic pointer authentication support arm64/cpufeature: detect pointer authentication arm64: Don't trap host pointer auth use to EL2 arm64/kvm: hide ptrauth from guests arm64/kvm: consistently handle host HCR_EL2 flags arm64: add pointer authentication register bits arm64: add comments about EC exception levels arm64: perf: Treat EXCLUDE_EL* bit definitions as unsigned arm64: kpti: Whitelist Cortex-A CPUs that don't implement the CSV3 field arm64: enable per-task stack canaries ...
2018-12-13seccomp, s390: fix build for syscall type changeTycho Andersen1-1/+1
A recent patch landed in the security tree [1] that changed the type of the seccomp syscall. Unfortunately, I didn't quite get every instance of the forward declarations, and thus there is a build failure. Here's the last one that I could find, for s390. It should go through the security tree, although hopefully some s390 people can check and make sure it looks reasonable? The only oddity is the trailing semicolon; some lines around this patch have it, and some lines don't. I've left this one as-is. [1]: https://lore.kernel.org/lkml/20181212231630.GA31584@beast/T/#u Signed-off-by: Tycho Andersen <tycho@tycho.ws> Fixes: 6a21cc50f0c7 ("seccomp: add a return code to trap to userspace") Signed-off-by: Kees Cook <keescook@chromium.org>
2018-12-06s390, kexec_file: drop arch_kexec_mem_walk()AKASHI Takahiro1-10/+0
Since s390 already knows where to locate buffers, calling arch_kexec_mem_walk() has no sense. So we can just drop it as kbuf->mem indicates this while all other architectures sets it to 0 initially. This change is a preparatory work for the next patch, where all the variant memory walks, either on system resource or memblock, will be put in one common place so that it will satisfy all the architectures' need. Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> Reviewed-by: Philipp Rudo <prudo@linux.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Dave Young <dyoung@redhat.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Baoquan He <bhe@redhat.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2018-11-30Merge tag 'trace-v4.20-rc3' of ↵Linus Torvalds1-11/+2
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing fixes from Steven Rostedt: "While rewriting the function graph tracer, I discovered a design flaw that was introduced by a patch that tried to fix one bug, but by doing so created another bug. As both bugs corrupt the output (but they do not crash the kernel), I decided to fix the design such that it could have both bugs fixed. The original fix, fixed time reporting of the function graph tracer when doing a max_depth of one. This was code that can test how much the kernel interferes with userspace. But in doing so, it could corrupt the time keeping of the function profiler. The issue is that the curr_ret_stack variable was being used for two different meanings. One was to keep track of the stack pointer on the ret_stack (shadow stack used by the function graph tracer), and the other use case was the graph call depth. Although, the two may be closely related, where they got updated was the issue that lead to the two different bugs that required the two use cases to be updated differently. The big issue with this fix is that it requires changing each architecture. The good news is, I was able to remove a lot of code that was duplicated within the architectures and place it into a single location. Then I could make the fix in one place. I pushed this code into linux-next to let it settle over a week, and before doing so, I cross compiled all the affected architectures to make sure that they built fine. In the mean time, I also pulled in a patch that fixes the sched_switch previous tasks state output, that was not actually correct" * tag 'trace-v4.20-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: sched, trace: Fix prev_state output in sched_switch tracepoint function_graph: Have profiler use curr_ret_stack and not depth function_graph: Reverse the order of pushing the ret_stack and the callback function_graph: Move return callback before update of curr_ret_stack function_graph: Use new curr_ret_depth to manage depth instead of curr_ret_stack function_graph: Make ftrace_push_return_trace() static sparc/function_graph: Simplify with function_graph_enter() sh/function_graph: Simplify with function_graph_enter() s390/function_graph: Simplify with function_graph_enter() riscv/function_graph: Simplify with function_graph_enter() powerpc/function_graph: Simplify with function_graph_enter() parisc: function_graph: Simplify with function_graph_enter() nds32: function_graph: Simplify with function_graph_enter() MIPS: function_graph: Simplify with function_graph_enter() microblaze: function_graph: Simplify with function_graph_enter() arm64: function_graph: Simplify with function_graph_enter() ARM: function_graph: Simplify with function_graph_enter() x86/function_graph: Simplify with function_graph_enter() function_graph: Create function_graph_enter() to consolidate architecture code
2018-11-27s390/function_graph: Simplify with function_graph_enter()Steven Rostedt (VMware)1-11/+2
The function_graph_enter() function does the work of calling the function graph hook function and the management of the shadow stack, simplifying the work done in the architecture dependent prepare_ftrace_return(). Have s390 use the new code, and remove the shadow stack management as well as having to set up the trace structure. This is needed to prepare for a fix of a design bug on how the curr_ret_stack is used. Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Julian Wiedmann <jwi@linux.ibm.com> Cc: linux-s390@vger.kernel.org Cc: stable@kernel.org Fixes: 03274a3ffb449 ("tracing/fgraph: Adjust fgraph depth before calling trace return callback") Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2018-11-14s390/cpum_cf: Reject request for sampling in event initializationThomas Richter1-0/+2
On s390 command perf top fails [root@s35lp76 perf] # ./perf top -F100000 --stdio Error: cycles: PMU Hardware doesn't support sampling/overflow-interrupts. Try 'perf stat' [root@s35lp76 perf] # Using event -e rb0000 works as designed. Event rb0000 is the event number of the sampling facility for basic sampling. During system start up the following PMUs are installed in the kernel's PMU list (from head to tail): cpum_cf --> s390 PMU counter facility device driver cpum_sf --> s390 PMU sampling facility device driver uprobe kprobe tracepoint task_clock cpu_clock Perf top executes following functions and calls perf_event_open(2) system call with different parameters many times: cmd_top --> __cmd_top --> perf_evlist__add_default --> __perf_evlist__add_default --> perf_evlist__new_cycles (creates event type:0 (HW) config 0 (CPU_CYCLES) --> perf_event_attr__set_max_precise_ip Uses perf_event_open(2) to detect correct precise_ip level. Fails 3 times on s390 which is ok. Then functions cmd_top --> __cmd_top --> perf_top__start_counters -->perf_evlist__config --> perf_can_comm_exec --> perf_probe_api This functions test support for the following events: "cycles:u", "instructions:u", "cpu-clock:u" using --> perf_do_probe_api --> perf_event_open_cloexec Test the close on exec flag support with perf_event_open(2). perf_do_probe_api returns true if the event is supported. The function returns true because event cpu-clock is supported by the PMU cpu_clock. This is achieved by many calls to perf_event_open(2). Function perf_top__start_counters now calls perf_evsel__open() for every event, which is the default event cpu_cycles (config:0) and type HARDWARE (type:0) which a predfined frequence of 4000. Given the above order of the PMU list, the PMU cpum_cf gets called first and returns 0, which indicates support for this sampling. The event is fully allocated in the function perf_event_open (file kernel/event/core.c near line 10521 and the following check fails: event = perf_event_alloc(&attr, cpu, task, group_leader, NULL, NULL, NULL, cgroup_fd); if (IS_ERR(event)) { err = PTR_ERR(event); goto err_cred; } if (is_sampling_event(event)) { if (event->pmu->capabilities & PERF_PMU_CAP_NO_INTERRUPT) { err = -EOPNOTSUPP; goto err_alloc; } } The check for the interrupt capabilities fails and the system call perf_event_open() returns -EOPNOTSUPP (-95). Add a check to return -ENODEV when sampling is requested in PMU cpum_cf. This allows common kernel code in the perf_event_open() system call to test the next PMU in above list. Fixes: 97b1198fece0 (" "s390, perf: Use common PMU interrupt disabled code") Signed-off-by: Thomas Richter <tmricht@linux.ibm.com> Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-11-09Merge tag 's390-4.20-2' of ↵Linus Torvalds6-17/+40
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 fixes from Martin Schwidefsky: - A fix for the pgtable_bytes misaccounting on s390. The patch changes common code part in regard to page table folding and adds extra checks to mm_[inc|dec]_nr_[pmds|puds]. - Add FORCE for all build targets using if_changed - Use non-loadable phdr for the .vmlinux.info section to avoid a segment overlap that confuses kexec - Cleanup the attribute definition for the diagnostic sampling - Increase stack size for CONFIG_KASAN=y builds - Export __node_distance to fix a build error - Correct return code of a PMU event init function - An update for the default configs * tag 's390-4.20-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/perf: Change CPUM_CF return code in event init function s390: update defconfigs s390/mm: Fix ERROR: "__node_distance" undefined! s390/kasan: increase instrumented stack size to 64k s390/cpum_sf: Rework attribute definition for diagnostic sampling s390/mm: fix mis-accounting of pgtable_bytes mm: add mm_pxd_folded checks to pgtable_bytes accounting functions mm: introduce mm_[p4d|pud|pmd]_folded mm: make the __PAGETABLE_PxD_FOLDED defines non-empty s390: avoid vmlinux segments overlap s390/vdso: add missing FORCE to build targets s390/decompressor: add missing FORCE to build targets
2018-11-08s390/perf: Change CPUM_CF return code in event init functionThomas Richter1-1/+1
The function perf_init_event() creates a new event and assignes it to a PMU. This a done in a loop over all existing PMUs. For each listed PMU the event init function is called and if this function does return any other error than -ENOENT, the loop is terminated the creation of the event fails. If the event is invalid, return -ENOENT to try other PMUs. Signed-off-by: Thomas Richter <tmricht@linux.ibm.com> Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-11-02s390/kasan: increase instrumented stack size to 64kVasily Gorbik1-3/+3
Increase kasan instrumented kernel stack size from 32k to 64k. Other architectures seems to get away with just doubling kernel stack size under kasan, but on s390 this appears to be not enough due to bigger frame size. The particular pain point is kasan inlined checks (CONFIG_KASAN_INLINE vs CONFIG_KASAN_OUTLINE). With inlined checks one particular case hitting stack overflow is fs sync on xfs filesystem: #0 [9a0681e8] 704 bytes check_usage at 34b1fc #1 [9a0684a8] 432 bytes check_usage at 34c710 #2 [9a068658] 1048 bytes validate_chain at 35044a #3 [9a068a70] 312 bytes __lock_acquire at 3559fe #4 [9a068ba8] 440 bytes lock_acquire at 3576ee #5 [9a068d60] 104 bytes _raw_spin_lock at 21b44e0 #6 [9a068dc8] 1992 bytes enqueue_entity at 2dbf72 #7 [9a069590] 1496 bytes enqueue_task_fair at 2df5f0 #8 [9a069b68] 64 bytes ttwu_do_activate at 28f438 #9 [9a069ba8] 552 bytes try_to_wake_up at 298c4c #10 [9a069dd0] 168 bytes wake_up_worker at 23f97c #11 [9a069e78] 200 bytes insert_work at 23fc2e #12 [9a069f40] 648 bytes __queue_work at 2487c0 #13 [9a06a1c8] 200 bytes __queue_delayed_work at 24db28 #14 [9a06a290] 248 bytes mod_delayed_work_on at 24de84 #15 [9a06a388] 24 bytes kblockd_mod_delayed_work_on at 153e2a0 #16 [9a06a3a0] 288 bytes __blk_mq_delay_run_hw_queue at 158168c #17 [9a06a4c0] 192 bytes blk_mq_run_hw_queue at 1581a3c #18 [9a06a580] 184 bytes blk_mq_sched_insert_requests at 15a2192 #19 [9a06a638] 1024 bytes blk_mq_flush_plug_list at 1590f3a #20 [9a06aa38] 704 bytes blk_flush_plug_list at 1555028 #21 [9a06acf8] 320 bytes schedule at 219e476 #22 [9a06ae38] 760 bytes schedule_timeout at 21b0aac #23 [9a06b130] 408 bytes wait_for_common at 21a1706 #24 [9a06b2c8] 360 bytes xfs_buf_iowait at fa1540 #25 [9a06b430] 256 bytes __xfs_buf_submit at fadae6 #26 [9a06b530] 264 bytes xfs_buf_read_map at fae3f6 #27 [9a06b638] 656 bytes xfs_trans_read_buf_map at 10ac9a8 #28 [9a06b8c8] 304 bytes xfs_btree_kill_root at e72426 #29 [9a06b9f8] 288 bytes xfs_btree_lookup_get_block at e7bc5e #30 [9a06bb18] 624 bytes xfs_btree_lookup at e7e1a6 #31 [9a06bd88] 2664 bytes xfs_alloc_ag_vextent_near at dfa070 #32 [9a06c7f0] 144 bytes xfs_alloc_ag_vextent at dff3ca #33 [9a06c880] 1128 bytes xfs_alloc_vextent at e05fce #34 [9a06cce8] 584 bytes xfs_bmap_btalloc at e58342 #35 [9a06cf30] 1336 bytes xfs_bmapi_write at e618de #36 [9a06d468] 776 bytes xfs_iomap_write_allocate at ff678e #37 [9a06d770] 720 bytes xfs_map_blocks at f82af8 #38 [9a06da40] 928 bytes xfs_writepage_map at f83cd6 #39 [9a06dde0] 320 bytes xfs_do_writepage at f85872 #40 [9a06df20] 1320 bytes write_cache_pages at 73dfe8 #41 [9a06e448] 208 bytes xfs_vm_writepages at f7f892 #42 [9a06e518] 88 bytes do_writepages at 73fe6a #43 [9a06e570] 872 bytes __writeback_single_inode at a20cb6 #44 [9a06e8d8] 664 bytes writeback_sb_inodes at a23be2 #45 [9a06eb70] 296 bytes __writeback_inodes_wb at a242e0 #46 [9a06ec98] 928 bytes wb_writeback at a2500e #47 [9a06f038] 848 bytes wb_do_writeback at a260ae #48 [9a06f388] 536 bytes wb_workfn at a28228 #49 [9a06f5a0] 1088 bytes process_one_work at 24a234 #50 [9a06f9e0] 1120 bytes worker_thread at 24ba26 #51 [9a06fe40] 104 bytes kthread at 26545a #52 [9a06fea8] kernel_thread_starter at 21b6b62 To be able to increase the stack size to 64k reuse LLILL instruction in __switch_to function to load 64k - STACK_FRAME_OVERHEAD - __PT_SIZE (65192) value as unsigned. Reported-by: Benjamin Block <bblock@linux.ibm.com> Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-11-02s390/cpum_sf: Rework attribute definition for diagnostic samplingThomas Richter1-5/+28
Previously, the attribute entry for diagnostic sampling was added if authorized. Otherwise, the array of struct attribute contains two NULL values. Change this logic and reserve space for the attribute for diagnostic sampling. If diagnostic sampling is authorized, add an entry in the respective position in the array of struct attribute. Signed-off-by: Thomas Richter <tmricht@linux.ibm.com> Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com> Suggested-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-10-31mm: remove include/linux/bootmem.hMike Rapoport5-7/+4
Move remaining definitions and declarations from include/linux/bootmem.h into include/linux/memblock.h and remove the redundant header. The includes were replaced with the semantic patch below and then semi-automated removal of duplicated '#include <linux/memblock.h> @@ @@ - #include <linux/bootmem.h> + #include <linux/memblock.h> [sfr@canb.auug.org.au: dma-direct: fix up for the removal of linux/bootmem.h] Link: http://lkml.kernel.org/r/20181002185342.133d1680@canb.auug.org.au [sfr@canb.auug.org.au: powerpc: fix up for removal of linux/bootmem.h] Link: http://lkml.kernel.org/r/20181005161406.73ef8727@canb.auug.org.au [sfr@canb.auug.org.au: x86/kaslr, ACPI/NUMA: fix for linux/bootmem.h removal] Link: http://lkml.kernel.org/r/20181008190341.5e396491@canb.auug.org.au Link: http://lkml.kernel.org/r/1536927045-23536-30-git-send-email-rppt@linux.vnet.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Ingo Molnar <mingo@redhat.com> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Jonas Bonn <jonas@southpole.se> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Ley Foon Tan <lftan@altera.com> Cc: Mark Salter <msalter@redhat.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Serge Semin <fancer.lancer@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-31memblock: remove _virt from APIs returning virtual addressMike Rapoport3-7/+7
The conversion is done using sed -i 's@memblock_virt_alloc@memblock_alloc@g' \ $(git grep -l memblock_virt_alloc) Link: http://lkml.kernel.org/r/1536927045-23536-8-git-send-email-rppt@linux.vnet.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Ingo Molnar <mingo@redhat.com> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Jonas Bonn <jonas@southpole.se> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Ley Foon Tan <lftan@altera.com> Cc: Mark Salter <msalter@redhat.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Hocko <mhocko@suse.com> Cc: Michal Simek <monstr@monstr.eu> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Serge Semin <fancer.lancer@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-31memblock: rename memblock_alloc{_nid,_try_nid} to memblock_phys_alloc*Mike Rapoport2-2/+3
Make it explicit that the caller gets a physical address rather than a virtual one. This will also allow using meblock_alloc prefix for memblock allocations returning virtual address, which is done in the following patches. The conversion is done using the following semantic patch: @@ expression e1, e2, e3; @@ ( - memblock_alloc(e1, e2) + memblock_phys_alloc(e1, e2) | - memblock_alloc_nid(e1, e2, e3) + memblock_phys_alloc_nid(e1, e2, e3) | - memblock_alloc_try_nid(e1, e2, e3) + memblock_phys_alloc_try_nid(e1, e2, e3) ) Link: http://lkml.kernel.org/r/1536927045-23536-7-git-send-email-rppt@linux.vnet.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Ingo Molnar <mingo@redhat.com> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Jonas Bonn <jonas@southpole.se> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Ley Foon Tan <lftan@altera.com> Cc: Mark Salter <msalter@redhat.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Serge Semin <fancer.lancer@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-26s390: avoid vmlinux segments overlapVasily Gorbik1-2/+2
Currently .vmlinux.info section of uncompressed vmlinux elf image is included into the data segment and load address specified as 0. That extends data segment to address 0 and makes "text" and "data" segments overlap. Program Headers: Type Offset VirtAddr PhysAddr FileSiz MemSiz Flags Align LOAD 0x0000000000001000 0x0000000000100000 0x0000000000100000 0x0000000000ead03c 0x0000000000ead03c R E 0x1000 LOAD 0x0000000000eaf000 0x0000000000000000 0x0000000000000000 0x0000000001a13400 0x000000000233b520 RWE 0x1000 NOTE 0x0000000000eae000 0x0000000000fad000 0x0000000000fad000 0x000000000000003c 0x000000000000003c 0x4 Section to Segment mapping: Segment Sections... 00 .text .notes 01 .rodata __ksymtab __ksymtab_gpl __ksymtab_strings __param __modver .data..ro_after_init __ex_table .data __bug_table .init.text .exit.text .exit.data .altinstructions .altinstr_replacement .nospec_call_table .nospec_return_table .boot.data .init.data .data..percpu .bss .vmlinux.info 02 .notes Later when vmlinux.bin is produced from vmlinux, .vmlinux.info section is removed. But elf vmlinux file, even though it is not bootable anymore, used for debugging and loadable segments overlap should be avoided. Utilize special ":NONE" phdr specification to avoid adding .vmlinux.info into loadable data segment. Also set .vmlinux.info section type to INFO, which allows to get a not-loadable info CONTENTS section. Since minimal supported version of binutils 2.20 does not have --dump-section objcopy option, make .vmlinux.info section loadable during info.bin creation to get actual section contents. Reported-by: Philipp Rudo <prudo@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-10-26s390/vdso: add missing FORCE to build targetsVasily Gorbik2-6/+6
According to Documentation/kbuild/makefiles.txt all build targets using if_changed should use FORCE as well. Add missing FORCE to make sure vdso targets are rebuild properly when not just immediate prerequisites have changed but also when build command differs. Reviewed-by: Philipp Rudo <prudo@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-10-23Merge branch 'locking-core-for-linus' of ↵Linus Torvalds2-5/+7
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull locking and misc x86 updates from Ingo Molnar: "Lots of changes in this cycle - in part because locking/core attracted a number of related x86 low level work which was easier to handle in a single tree: - Linux Kernel Memory Consistency Model updates (Alan Stern, Paul E. McKenney, Andrea Parri) - lockdep scalability improvements and micro-optimizations (Waiman Long) - rwsem improvements (Waiman Long) - spinlock micro-optimization (Matthew Wilcox) - qspinlocks: Provide a liveness guarantee (more fairness) on x86. (Peter Zijlstra) - Add support for relative references in jump tables on arm64, x86 and s390 to optimize jump labels (Ard Biesheuvel, Heiko Carstens) - Be a lot less permissive on weird (kernel address) uaccess faults on x86: BUG() when uaccess helpers fault on kernel addresses (Jann Horn) - macrofy x86 asm statements to un-confuse the GCC inliner. (Nadav Amit) - ... and a handful of other smaller changes as well" * 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (57 commits) locking/lockdep: Make global debug_locks* variables read-mostly locking/lockdep: Fix debug_locks off performance problem locking/pvqspinlock: Extend node size when pvqspinlock is configured locking/qspinlock_stat: Count instances of nested lock slowpaths locking/qspinlock, x86: Provide liveness guarantee x86/asm: 'Simplify' GEN_*_RMWcc() macros locking/qspinlock: Rework some comments locking/qspinlock: Re-order code locking/lockdep: Remove duplicated 'lock_class_ops' percpu array x86/defconfig: Enable CONFIG_USB_XHCI_HCD=y futex: Replace spin_is_locked() with lockdep locking/lockdep: Make class->ops a percpu counter and move it under CONFIG_DEBUG_LOCKDEP=y x86/jump-labels: Macrofy inline assembly code to work around GCC inlining bugs x86/cpufeature: Macrofy inline assembly code to work around GCC inlining bugs x86/extable: Macrofy inline assembly code to work around GCC inlining bugs x86/paravirt: Work around GCC inlining bugs when compiling paravirt ops x86/bug: Macrofy the BUG table section handling, to work around GCC inlining bugs x86/alternatives: Macrofy lock prefixes to work around GCC inlining bugs x86/refcount: Work around GCC inlining bug x86/objtool: Use asm macros to work around GCC inlining bugs ...
2018-10-19s390/perf: Return error when debug_register failsThomas Richter1-1/+5
Return an error when the function debug_register() fails allocating the debug handle. Also remove the registered debug handle when the initialization fails later on. Signed-off-by: Thomas Richter <tmricht@linux.ibm.com> Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-10-15s390/sthyi: Fix machine name validity indicationJanosch Frank1-3/+5
When running as a level 3 guest with no host provided sthyi support sclp_ocf_cpc_name_copy() will only return zeroes. Zeroes are not a valid group name, so let's not indicate that the group name field is valid. Also the group name is not dependent on stsi, let's not return based on stsi before setting it. Fixes: 95ca2cb57985 ("KVM: s390: Add sthyi emulation") Signed-off-by: Janosch Frank <frankja@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-10-11s390/vmalloc: fix VMALLOC_START calculationMikhail Zaslonko1-2/+2
With the introduction of the module area on top of the vmalloc area, the calculation of VMALLOC_START in setup_memory_end() function hasn't been adjusted. As a result we got vmalloc area 2 Gb (MODULES_LEN) smaller than it should be and the preceding vmemmap area got extra memory instead. The patch fixes this calculation error although there were no visible negative effects. Apart from that, change 'tmp' variable to 'vmemmap' in memory_end calculation for better readability. Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-10-10s390/dumpstack: print psw mask and address againHeiko Carstens1-1/+1
With pointer obfuscation the output of show_registers() became quite useless: Krnl PSW : (____ptrval____) (____ptrval____) (__list_add_valid+0x98/0xa8) In order to print the psw mask and address use %px instead of %p. And the output looks again like this: Krnl PSW : 0404d00180000000 00000000007c0dd0 (__list_add_valid+0x98/0xa8) Reviewed-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-10-09s390/kasan: add option for 4-level paging supportVasily Gorbik1-1/+3
By default 3-level paging is used when the kernel is compiled with kasan support. Add 4-level paging option to support systems with more then 3TB of physical memory and to cover 4-level paging specific code with kasan as well. Reviewed-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-10-09s390/dumpstack: disable __dump_trace kasan instrumentationVasily Gorbik1-1/+1
Walking async_stack produces false positives. Disable __dump_trace function instrumentation for now. Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-10-09s390/kasan: reipl and kexec supportVasily Gorbik3-2/+7
Some functions from both arch/s390/kernel/ipl.c and arch/s390/kernel/machine_kexec.c are called without DAT enabled (or with and without DAT enabled code paths). There is no easy way to partially disable kasan for those files without a substantial rework. Disable kasan for both files for now. To avoid disabling kasan for arch/s390/kernel/diag.c DAT flag is enabled in diag308 call. pcpu_delegate which disables DAT is marked with __no_sanitize_address to disable instrumentation for that one function. Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-10-09s390/smp: kasan stack instrumentation supportVasily Gorbik1-3/+3
smp_start_secondary function is called without DAT enabled. To avoid disabling kasan instrumentation for entire arch/s390/kernel/smp.c smp_start_secondary has been split in 2 parts. smp_start_secondary has instrumentation disabled, it does minimal setup and enables DAT. Then instrumentated __smp_start_secondary is called to do the rest. __load_psw_mask function instrumentation has been disabled as well to be able to call it from smp_start_secondary. Reviewed-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-10-09s390/kasan: use noexec and large pagesVasily Gorbik1-0/+1
To lower memory footprint and speed up kasan initialisation detect EDAT availability and use large pages if possible. As we know how much memory is needed for initialisation, another simplistic large page allocator is introduced to avoid memory fragmentation. Since facilities list is retrieved anyhow, detect noexec support and adjust pages attributes. Handle noexec kernel option to avoid inconsistent kasan shadow memory pages flags. Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-10-09s390/kasan: dynamic shadow mem allocation for modulesVasily Gorbik1-4/+11
Move from modules area entire shadow memory preallocation to dynamic allocation per module load. This behaivior has been introduced for x86 with bebf56a1b: "This patch also forces module_alloc() to return 8*PAGE_SIZE aligned address making shadow memory handling ( kasan_module_alloc()/kasan_module_free() ) more simple. Such alignment guarantees that each shadow page backing modules address space correspond to only one module_alloc() allocation" Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-10-09s390/kasan: add initialization code and enable itVasily Gorbik2-6/+18
Kasan needs 1/8 of kernel virtual address space to be reserved as the shadow area. And eventually it requires the shadow memory offset to be known at compile time (passed to the compiler when full instrumentation is enabled). Any value picked as the shadow area offset for 3-level paging would eat up identity mapping on 4-level paging (with 1PB shadow area size). So, the kernel sticks to 3-level paging when kasan is enabled. 3TB border is picked as the shadow offset. The memory layout is adjusted so, that physical memory border does not exceed KASAN_SHADOW_START and vmemmap does not go below KASAN_SHADOW_END. Due to the fact that on s390 paging is set up very late and to cover more code with kasan instrumentation, temporary identity mapping and final shadow memory are set up early. The shadow memory mapping is later carried over to init_mm.pgd during paging_init. For the needs of paging structures allocation and shadow memory population a primitive allocator is used, which simply chops off memory blocks from the end of the physical memory. Kasan currenty doesn't track vmemmap and vmalloc areas. Current memory layout (for 3-level paging, 2GB physical memory). ---[ Identity Mapping ]--- 0x0000000000000000-0x0000000000100000 ---[ Kernel Image Start ]--- 0x0000000000100000-0x0000000002b00000 ---[ Kernel Image End ]--- 0x0000000002b00000-0x0000000080000000 2G <- physical memory border 0x0000000080000000-0x0000030000000000 3070G PUD I ---[ Kasan Shadow Start ]--- 0x0000030000000000-0x0000030010000000 256M PMD RW X <- shadow for 2G memory 0x0000030010000000-0x0000037ff0000000 523776M PTE RO NX <- kasan zero ro page 0x0000037ff0000000-0x0000038000000000 256M PMD RW X <- shadow for 2G modules ---[ Kasan Shadow End ]--- 0x0000038000000000-0x000003d100000000 324G PUD I ---[ vmemmap Area ]--- 0x000003d100000000-0x000003e080000000 ---[ vmalloc Area ]--- 0x000003e080000000-0x000003ff80000000 ---[ Modules Area ]--- 0x000003ff80000000-0x0000040000000000 2G Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-10-09s390/kasan: avoid instrumentation of early C codeVasily Gorbik1-0/+2
Instrumented C code cannot run without the kasan shadow area. Exempt source code files from kasan which are running before / used during kasan initialization. Reviewed-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-10-09s390/kasan: avoid vdso instrumentationVasily Gorbik2-2/+4
vdso is mapped into user space processes, which won't have kasan shodow mapped. Reviewed-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-10-09s390: move ipl block and cmd line handling to early boot phaseVasily Gorbik5-173/+55
To distinguish zfcpdump case and to be able to parse some of the kernel command line arguments early (e.g. mem=) ipl block retrieval and command line construction code is moved to the early boot phase. "memory_end" is set up correctly respecting "mem=" and hsa_size in case of the zfcpdump. arch/s390/boot/string.c is introduced to provide string handling and command line parsing functions to early boot phase code for the compressed kernel image case. Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-10-09s390/mem_detect: add info source debug printVasily Gorbik1-0/+17
Print mem_detect info source when memblock=debug is specified. Reviewed-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-10-09s390/mem_detect: move tprot loop to early boot phaseVasily Gorbik1-2/+45
Move memory detection to early boot phase. To store online memory regions "struct mem_detect_info" has been introduced together with for_each_mem_detect_block iterator. mem_detect_info is later converted to memblock. Also introduces sclp_early_get_meminfo function to get maximum physical memory and maximum increment number. Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Reviewed-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-09-06 06:42:18 +0000