summaryrefslogtreecommitdiffstats
path: root/arch/s390/kernel
AgeCommit message (Collapse)AuthorFilesLines
2016-03-08s390/cpumf: Fix lpp detectionChristian Borntraeger1-1/+1
we have to check bit 40 of the facility list before issuing LPP and not bit 48. Otherwise a guest running on a system with "The decimal-floating-point zoned-conversion facility" and without the "The set-program-parameters facility" might crash on an lpp instruction. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Cc: stable@vger.kernel.org # v4.4+ Fixes: e22cf8ca6f75 ("s390/cpumf: rework program parameter setting to detect guest samples") Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-02-22s390/compat: correct restore of high gprs on signal returnMartin Schwidefsky1-1/+1
git commit 8070361799ae1e3f4ef347bd10f0a508ac10acfb "s390: add support for vector extension" broke 31-bit compat processes in regard to signal handling. The restore_sigregs_ext32() function is used to restore the additional elements from the user space signal frame. Among the additional elements are the upper registers halves for 64-bit register support for 31-bit processes. The copy_from_user that is used to retrieve the high-gprs array from the user stack uses an incorrect length, 8 bytes instead of 64 bytes. This causes incorrect upper register halves to get loaded. Cc: stable@vger.kernel.org # 3.8+ Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-02-11s390/diag: avoid lockdep recursionHeiko Carstens1-0/+3
The diagnose tracer will indirectly call back into the lockdep code when lockdep does not expect it (arch_spinlock). This causes lockdep to disable itself and therefore we don't have a working lock dependency validator anymore. This patch effectively disables tracing of diag 0x9c and 0x44 if lockdep is enabled. If however lockdep is enabled spinlocks are mainly implemented using a trylock variant, which will not issue any diag 0x9c or 0x44. So this change has hardly any effect on tracing except when arch_spinlock and friends are explicitly used. Reported-and-Tested-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-02-10s390/perf_event: fix address range for asynchronous stackHeiko Carstens1-3/+5
git commit dc7ee00d4771 ("s390: lowcore stack pointer offsets") introduced a regression in regard to perf_callchain_kernel(). The stack pointer for the asynchronous stack in the lowcore now has an additional offset applied. This offset needs to be taken into account in the calculation for the low and high address for the stack. This bug was already partially fixed with 9cc5c206d9b4 ("s390/dumpstack: fix address ranges for asynchronous and panic stack"). This patch fixes it also for the perf_event code. Fixes: dc7ee00d4771 ("s390: lowcore stack pointer offsets") Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-02-10s390/stacktrace: add save_stack_trace_regs()Pratyush Anand1-0/+11
Implement save_stack_trace_regs, so that a stack trace of a kprobe event can be obtained. Without this we see following warning: "save_stack_trace_regs() not implemented yet." when we execute: echo stacktrace > /sys/kernel/debug/tracing/trace_options echo "p kfree" >> /sys/kernel/debug/tracing/kprobe_events echo 1 > /sys/kernel/debug/tracing/events/kprobes/enable Reported-by: Chunyu Hu <chuhu@redhat.com> Signed-off-by: Pratyush Anand <panand@redhat.com> [heiko.carstens@de.ibm.com]: changed patch to use __save_stack_trace() Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Tested-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-02-10s390/stacktrace: save full stack tracesHeiko Carstens1-9/+12
save_stack_trace() only saves the stack trace of the current context (interrupt or process context). This is different to what other architectures like x86 do, which save the full stack trace across different contexts. Also extract a __save_stack_trace() helper function which will be used by a follow on patch. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Tested-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-02-10s390/stacktrace: add missing end markerHeiko Carstens1-0/+2
save_stack_trace() did not write the ULONG_MAX end marker if there is enough space left. So simply follow x86 and arm64. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Tested-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-02-10s390/stacktrace: fix address ranges for asynchronous and panic stackHeiko Carstens1-5/+6
git commit dc7ee00d4771 ("s390: lowcore stack pointer offsets") introduced a regression in regard to save_stack_trace(). The stack pointer for the asynchronous and the panic stack in the lowcore now have an additional offset applied to them. This offset needs to be taken into account in the calculation for the low and high address for the stacks. This bug was already partially fixed with 9cc5c206d9b4 ("s390/dumpstack: fix address ranges for asynchronous and panic stack"). This patch fixes it also for the stacktrace code. Fixes: dc7ee00d4771 ("s390: lowcore stack pointer offsets") Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Tested-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-02-10s390/stacktrace: fix save_stack_trace_tsk() for current taskHeiko Carstens1-0/+4
The function save_stack_trace_tsk() did not consider that it can be used for tsk == current, for which the current stack pointer obviously cannot be found in the thread structure. Fix this and get the stack pointer with an inline assembly. This fixes e.g. the output of "cat /proc/self/stack". Before: [<0000000000000000>] (null) [<ffffffffffffffff>] 0xffffffffffffffff After: [<000000000011b3ee>] save_stack_trace_tsk+0x56/0x98 [<0000000000366cde>] proc_pid_stack+0xae/0x108 [<00000000003636f0>] proc_single_show+0x70/0xc0 [<0000000000311fbc>] seq_read+0xcc/0x448 [<00000000002e7716>] __vfs_read+0x36/0x100 [<00000000002e872e>] vfs_read+0x76/0x130 [<00000000002e975e>] SyS_read+0x66/0xd8 [<000000000089490e>] system_call+0xd6/0x264 [<ffffffffffffffff>] 0xffffffffffffffff Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Tested-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-01-19s390: remove all usages of PSW_ADDR_INSNHeiko Carstens10-38/+31
Yet another leftover from the 31 bit era. The usual operation "y = x & PSW_ADDR_INSN" with the PSW_ADDR_INSN mask is a nop for CONFIG_64BIT. Therefore remove all usages and hope the code is a bit less confusing. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
2016-01-19s390: remove all usages of PSW_ADDR_AMODEHeiko Carstens7-29/+24
This is a leftover from the 31 bit area. For CONFIG_64BIT the usual operation "y = x | PSW_ADDR_AMODE" is a nop. Therefore remove all usages of PSW_ADDR_AMODE and make the code a bit less confusing. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
2016-01-19s390: wire up copy_file_range syscallHeiko Carstens2-0/+2
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-01-19s390: remove superfluous memblock_alloc() return value checksHeiko Carstens2-4/+0
memblock_alloc() and memblock_alloc_base() will panic on their own if they can't find free memory. Therefore remove some pointless checks. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Acked-by: Michael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-01-14Merge branch 'for-linus' of ↵Linus Torvalds1-11/+11
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/livepatching Pull livepatching updates from Jiri Kosina: - RO/NX attribute fixes for patch module relocations from Josh Poimboeuf. As part of this effort, module.c has been cleaned up as well and livepatching is piggy-backing on this cleanup. Rusty is OK with this whole lot going through livepatching tree. - symbol disambiguation support from Chris J Arges. That series is also Reviewed-by: Miroslav Benes <mbenes@suse.cz> but this came in only after I've alredy pushed out. Didn't want to rebase because of that, hence I am mentioning it here. - symbol lookup fix from Miroslav Benes * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/livepatching: livepatch: Cleanup module page permission changes module: keep percpu symbols in module's symtab module: clean up RO/NX handling. module: use a structure to encapsulate layout. gcov: use within_module() helper. module: Use the same logic for setting and unsetting RO/NX livepatch: function,sympos scheme in livepatch sysfs directory livepatch: add sympos as disambiguator field to klp_reloc livepatch: add old_sympos as disambiguator field to klp_func
2016-01-13Merge branch 'for-linus' of ↵Linus Torvalds24-618/+695
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 updates from Martin Schwidefsky: "Among the traditional bug fixes and cleanups are some improvements: - A tool to generated the facility lists, generating the bit fields by hand has been a source of bugs in the past - The spinlock loop is reordered to avoid bursts of hypervisor calls - Add support for the open-for-business interface to the service element - The get_cpu call is added to the vdso - A set of tracepoints is defined for the common I/O layer - The deprecated sclp_cpi module is removed - Update default configuration" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (56 commits) s390/sclp: fix possible control register corruption s390: fix normalization bug in exception table sorting s390/configs: update default configurations s390/vdso: optimize getcpu system call s390: drop smp_mb in vdso_init s390: rename struct _lowcore to struct lowcore s390/mem_detect: use unsigned longs s390/ptrace: get rid of long longs in psw_bits s390/sysinfo: add missing SYSIB 1.2.2 multithreading fields s390: get rid of CONFIG_SCHED_MC and CONFIG_SCHED_BOOK s390/Kconfig: remove pointless 64 bit dependencies s390/dasd: fix failfast for disconnected devices s390/con3270: testing return kzalloc retval s390/hmcdrv: constify hmcdrv_ftp_ops structs s390/cio: add NULL test s390/cio: Change I/O instructions from inline to normal functions s390/cio: Introduce common I/O layer tracepoints s390/cio: Consolidate inline assemblies and related data definitions s390/cio: Fix incorrect xsch opcode specification s390/cio: Remove unused inline assemblies ...
2016-01-12Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds2-0/+15
Pull KVM updates from Paolo Bonzini: "PPC changes will come next week. - s390: Support for runtime instrumentation within guests, support of 248 VCPUs. - ARM: rewrite of the arm64 world switch in C, support for 16-bit VM identifiers. Performance counter virtualization missed the boat. - x86: Support for more Hyper-V features (synthetic interrupt controller), MMU cleanups" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (115 commits) kvm: x86: Fix vmwrite to SECONDARY_VM_EXEC_CONTROL kvm/x86: Hyper-V SynIC timers tracepoints kvm/x86: Hyper-V SynIC tracepoints kvm/x86: Update SynIC timers on guest entry only kvm/x86: Skip SynIC vector check for QEMU side kvm/x86: Hyper-V fix SynIC timer disabling condition kvm/x86: Reorg stimer_expiration() to better control timer restart kvm/x86: Hyper-V unify stimer_start() and stimer_restart() kvm/x86: Drop stimer_stop() function kvm/x86: Hyper-V timers fix incorrect logical operation KVM: move architecture-dependent requests to arch/ KVM: renumber vcpu->request bits KVM: document which architecture uses each request bit KVM: Remove unused KVM_REQ_KICK to save a bit in vcpu->requests kvm: x86: Check kvm_write_guest return value in kvm_write_wall_clock KVM: s390: implement the RI support of guest kvm/s390: drop unpaired smp_mb kvm: x86: fix comment about {mmu,nested_mmu}.gva_to_gpa KVM: x86: MMU: Use clear_page() instead of init_shadow_page_table() arm/arm64: KVM: Detect vGIC presence at runtime ...
2016-01-11s390/vdso: optimize getcpu system callMartin Schwidefsky8-3/+99
Add the CPU number to the per-cpu vdso data page and add the __kernel_getcpu function to the vdso object to retrieve the CPU number in user space. Suggested-by: Heiko Carstens <heiko.carstens@de.ibm.com> Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-01-11s390: drop smp_mb in vdso_initMichael S. Tsirkin1-2/+0
The initial s390 vdso code is heavily influenced by the powerpc version which does have a smp_wmb in vdso_init right before the vdso_ready=1 assignment. s390 has no need for that. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Message-Id: <1452010645-25380-1-git-send-email-mst@redhat.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-01-11s390: rename struct _lowcore to struct lowcoreHeiko Carstens6-105/+105
Finally get rid of the leading underscore. I tried this already two or three years ago, however Michael Holzheu objected since this would break the crash utility (again). However Michael integrated support for the new name into the crash utility back then, so it doesn't break if the name will be changed now. So finally get rid of the ever confusing leading underscore. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-01-11s390/sysinfo: add missing SYSIB 1.2.2 multithreading fieldsHeiko Carstens1-7/+8
Add missing multithreading fields of SYSIB 1.2.2 (Basic-Machine CPUs) to the output of /proc/sysinfo. Also use bitfields for SYSIB 2.2.2 to simplify the C code a bit. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-12-30s390: get rid of CONFIG_SCHED_MC and CONFIG_SCHED_BOOKHeiko Carstens2-2/+2
Use CONFIG_TOPOLOGY which selects CONFIG_SCHED_* all over the place to reduce the random usage of the previous config options. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-12-18s390/smp: save timestamp on external callsHeiko Carstens1-0/+2
This is supposed to make debugging easier: if within a dump we can see that an external call or emergency signal IPI is pending but all cpus are idle, we have no idea for how long the interrupt is outstanding. Therefore save a timestamp into the per cpu pcpu array of the target cpu whenever such an IPI is sent. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-12-18s390/sysinfo: Remove unused variablesChristian Borntraeger1-2/+1
max_mnest and rc are never used. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-12-18s390/traps: Remove unused variableChristian Borntraeger1-3/+0
location is assigned but never used. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-12-18s390: compile head.S always with -march=z900Heiko Carstens1-2/+4
head.S on s390 contains some sanity checks if the kernel will run on a machine or if the machine is too old, e.g. if the kernel contains instructions not available on the machine. If so, it will emit an error message to the console before it stops execution. Therefore head.S contains only instructions which are availanble with the earliest machine generation (z900). In order to make sure we don't accidently add instructions which are not available on z900, always compile with -march=z900. This makes sure compilation will fail if wrong instructions are used. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-12-18s390/facilities: make use of generated facility listHeiko Carstens1-24/+11
Change head.S to make use of the generated facility list. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-12-18s390/facilities: always use lowcore's stfle field for storing facility bitsHeiko Carstens3-6/+7
head.s contains an stfle instruction which stores it result at the storage location that is assigned to the stfl instruction. This is currently no problem, since we only care about one double word. However if the number of double words in the ALS bitfield grows the current code is not very stable. E.g. before issuing the stfle command the memory to which it stores must be cleared, since the instruction may or may not clear memory contents where no bits are set. In order to simplify the code a bit always use the storage location that we reserved for the stfle result. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-12-18s390/facilities: use stfl mnemonic instead of insn magicHeiko Carstens1-1/+1
Now that 31 bit support is gone, the assembler always knows about the stfl instruction. Therefore lets use a readable mnemonic. Also remove the not needed extable entry for the inline assembly and fix the output constraint. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-12-18s390/dis: Fix handling of format specifiersMichael Holzheu1-5/+12
The print_insn() function returns strings like "lghi %r1,0". To escape the '%' character in sprintf() a second '%' is used. For example "lghi %%r1,0" is converted into "lghi %r1,0". After print_insn() the output string is passed to printk(). Because format specifiers like "%r" or "%f" are ignored by printk() this works by chance most of the time. But for instructions with control registers like "lctl %c6,%c6,780" this fails because printk() interprets "%c" as character format specifier. Fix this problem and escape the '%' characters twice. For example "lctl %%%%c6,%%%%c6,780" is then converted by sprintf() into "lctl %%c6,%%c6,780" and by printk() into "lctl %c6,%c6,780". Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com> Cc: stable@vger.kernel.org Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-12-04module: use a structure to encapsulate layout.Rusty Russell1-11/+11
Makes it easier to handle init vs core cleanly, though the change is fairly invasive across random architectures. It simplifies the rbtree code immediately, however, while keeping the core data together in the same cachline (now iff the rbtree code is enabled). Acked-by: Peter Zijlstra <peterz@infradead.org> Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-11-30s390: show virtualization support in /proc/cpuinfoDavid Hildenbrand2-0/+15
This patch exposes the SIE capability (aka virtualization support) via /proc/cpuinfo -> "features" as "sie". As we don't want to expose this hwcap via elf, let's add a second, "internal"/non-elf capability list. The content is simply concatenated to the existing features when printing /proc/cpuinfo. We also add the defines to elf.h to keep the hwcap stuff at a common place. Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-11-27s390/spinlock: do not yield to a CPU in udelay/mdelayMartin Schwidefsky1-0/+2
It does not make sense to try to relinquish the time slice with diag 0x9c to a CPU in a state that does not allow to schedule the CPU. The scenario where this can happen is a CPU waiting in udelay/mdelay while holding a spin-lock. Add a CIF bit to tag a CPU in enabled wait and use it to detect that the yield of a CPU will not be successful and skip the diagnose call. Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-11-27s390/sclp: Add VT220 support to early sclp consoleSascha Silbe1-15/+50
When running under qemu with the default configuration (-nographic), there is only a VT220 SCLP console, no line-mode SCLP console. Add VT220 support to the early SCLP console so the user has a chance to see critical error messages during early boot. None of the existing users of _sclp_print_early() check the return code. Instead of trying to come up with return code semantics when printing to multiple consoles (any or all of which may fail), we just drop the return code entirely. Tested on z/VM (line mode console) and LPAR (VT220 and line mode console). Tested on qemu/KVM with VT220 console and / or line mode console. Signed-off-by: Sascha Silbe <silbe@linux.vnet.ibm.com> Reviewed-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-11-27s390/dis: Fix printing of the register numbersChristian Borntraeger1-2/+2
Since commit b006f19b055f ("lib/vsprintf.c: handle invalid format specifiers more robustly") I get errors like [...] Krnl Code: 00000000004e2410: c00400000000 brcl 0,4e2410 Please remove unsupported %r in format string [ 8.179483] ------------[ cut here ]------------ [ 8.179484] WARNING: at lib/vsprintf.c:1781 Turns out that our disassembler relied on %r not being used as format string. Let's do the proper escaping of our decode buffers. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-11-27s390/dump: cleanup CPU save area handlingMartin Schwidefsky2-165/+135
Introduce save_area_alloc(), save_area_boot_cpu(), save_area_add_regs() and save_area_add_vxrs to deal with storing the CPU state in case of a system dump. Remove struct save_area and save_area_ext, and create a new struct save_area as a local definition to arch/s390/kernel/crash_dump.c. Copy each individual field from the hardware status area to the save area, storing the minimum of required data. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-11-27s390/dump: rework CPU register dump codeMartin Schwidefsky6-128/+153
To collect the CPU registers of the crashed system allocated a single page with memblock_alloc_base and use it as a copy buffer. Replace the stop-and-store-status sigp with a store-status-at-address sigp in smp_save_dump_cpus() and smp_store_status(). In both cases the target CPU is already stopped and store-status-at-address avoids the detour via the absolute zero page. For kexec simplify s390_reset_system and call store_status() before the prefix register of the boot CPU has been set to zero. Use STPX to store the prefix register and remove dump_prefix_page. Acked-by: Michael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-11-27s390/dump: remove SAVE_AREA_BASEMartin Schwidefsky4-35/+41
Replace the SAVE_AREA_BASE offset calculations in reipl.S with the assembler constant for the location of each register status area. Use __LC_FPREGS_SAVE_AREA instead of SAVE_AREA_BASE in the three remaining code locations and remove the definition of SAVE_AREA_BASE. Acked-by: Michael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-11-27s390/kvm: remove dependency on struct save_area definitionMartin Schwidefsky1-0/+1
Replace the offsets based on the struct area_area with the offset constants from asm-offsets.c based on the struct _lowcore. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-11-27s390/dump: streamline oldmem copy functionsMartin Schwidefsky3-97/+85
Introduce two copy functions for the memory of the dumped system, copy_oldmem_kernel() to copy to the virtual kernel address space and copy_oldmem_user() to copy to user space. Acked-by: Michael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-11-27s390/kdump: remove code to create ELF notes in the crashed systemMartin Schwidefsky4-61/+28
The s390 architecture can store the CPU registers of the crashed system after the kdump kernel has been started and this is the preferred way. Remove the remaining code fragments that deal with storing CPU registers while the crashed system is still active. Acked-by: Michael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-11-16s390: remove SALIPL loaderHeiko Carstens1-79/+8
There is no known user, therefore remove the code. Acked-by: Rob Van Der Heij <robvdheij@nl.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-11-16s390: wire up mlock2 system callHeiko Carstens2-0/+2
Passes mlock2-tests test case in 64 bit and compat mode. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-11-16s390: remove g5 elf platform supportHeiko Carstens1-3/+0
Remove dead code, since this could only happen on a 31 bit machine where the kernel wouldn't IPL. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-11-16s390: avoid cache aliasing under z/VM and KVMMartin Schwidefsky1-5/+1
commit 1f6b83e5e4d3 ("s390: avoid z13 cache aliasing") checks for the machine type to optimize address space randomization and zero page allocation to avoid cache aliases. This check might fail under a hypervisor with migration support. z/VMs "Single System Image and Live Guest Relocation" facility will "fake" the machine type of the oldest system in the group. For example in a group of zEC12 and Z13 the guest appears to run on a zEC12 (architecture fencing within the relocation domain) Remove the machine type detection and always use cache aliasing rules that are known to work for all machines. These are the z13 aliasing rules. Suggested-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-11-12s390/sclp: _sclp_wait_int(): retain full PSW maskSascha Silbe1-1/+1
There's no reason to clear all PSW mask bits other than the addressing mode bits. Just use the previous PSW mask as-is. Signed-off-by: Sascha Silbe <silbe@linux.vnet.ibm.com> Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-11-11s390: add support for ipl devices in subchannel sets > 0Sebastian Ott1-11/+37
Allow to ipl from CCW based devices residing in any subchannel set. Reviewed-by: Michael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-11-11s390/ipl: fix out of bounds access in scpdata_writeSebastian Ott1-12/+5
The input buffer in reipl_fcp_scpdata_write is accessed out of bounds when an offset is specified. The problem is that the offset refers to the data we should write to and not to the buffer we read from. So instead of memcpy(scp_data, buf + off, count); we could just do memcpy(scp_data + off, buf, count); However we not only modify the data but also store its length. For this to work we'd need to remember a state per open FH. Since that's not possible with sysfs callbacks let's just fail when an offset is specified. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Acked-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-11-09s390/diag: add a s390 prefix to the diagnose trace pointMartin Schwidefsky2-5/+5
Documentation/trace/tracepoints.txt states that the naming scheme for tracepoints is "subsys_event" to avoid collisions. Rename the 'diagnose' tracepoint to 's390_diagnose'. Reported-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-11-09s390/head: fix error message on unsupported hardwareSascha Silbe1-4/+4
startup calls the C function _sclp_print_early() if the machine we're running on is not supported by the kernel. sclp.c is getting built with -m64, so _sclp_print_early() expects the zSeries ELF ABI to be used. We previously called _sclp_print_early() using the S/390 ELF ABI, with a stack frame size of 96 bytes and while being in 31-bit address mode. This caused _sclp_wait_int() (called indirectly from _sclp_print_early()) to jump to an undefined address. While _sclp_wait_int() contained some code to deal with being called in 31-bit addressing mode, it didn't quite work. While fixing this is possible, the code would still only work by chance and could break any time. Ensure compliance with the zSeries ELF ABI by switching to 64-bit addressing mode early and using a minimum stack frame size of 160 bytes. Signed-off-by: Sascha Silbe <silbe@linux.vnet.ibm.com> Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-11-04Merge branch 'for-linus' of ↵Linus Torvalds26-547/+608
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 updates from Martin Schwidefsky: "There is only one new feature in this pull for the 4.4 merge window, most of it is small enhancements, cleanup and bug fixes: - Add the s390 backend for the software dirty bit tracking. This adds two new pgtable functions pte_clear_soft_dirty and pmd_clear_soft_dirty which is why there is a hit to arch/x86/include/asm/pgtable.h in this pull request. - A series of cleanup patches for the AP bus, this includes the removal of the support for two outdated crypto cards (PCICC and PCICA). - The irq handling / signaling on buffer full in the runtime instrumentation code is dropped. - Some micro optimizations: remove unnecessary memory barriers for a couple of functions: [smb_]rmb, [smb_]wmb, atomics, bitops, and for spin_unlock. Use the builtin bswap if available and make test_and_set_bit_lock more cache friendly. - Statistics and a tracepoint for the diagnose calls to the hypervisor. - The CPU measurement facility support to sample KVM guests is improved. - The vector instructions are now always enabled for user space processes if the hardware has the vector facility. This simplifies the FPU handling code. The fpu-internal.h header is split into fpu internals, api and types just like x86. - Cleanup and improvements for the common I/O layer. - Rework udelay to solve a problem with kprobe. udelay has busy loop semantics but still uses an idle processor state for the wait" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (66 commits) s390: remove runtime instrumentation interrupts s390/cio: de-duplicate subchannel validation s390/css: unneeded initialization in for_each_subchannel s390/Kconfig: use builtin bswap s390/dasd: fix disconnected device with valid path mask s390/dasd: fix invalid PAV assignment after suspend/resume s390/dasd: fix double free in dasd_eckd_read_conf s390/kernel: fix ptrace peek/poke for floating point registers s390/cio: move ccw_device_stlck functions s390/cio: move ccw_device_call_handler s390/topology: reduce per_cpu() invocations s390/nmi: reduce size of percpu variable s390/nmi: fix terminology s390/nmi: remove casts s390/nmi: remove pointless error strings s390: don't store registers on disabled wait anymore s390: get rid of __set_psw_mask() s390/fpu: split fpu-internal.h into fpu internals, api, and type headers s390/dasd: fix list_del corruption after lcu changes s390/spinlock: remove unneeded serializations at unlock ...
generated by cgit v1.2.3 (git 2.39.1) at 2025-02-10 14:57:02 +0000