summaryrefslogtreecommitdiffstats
path: root/arch/s390/include/asm/topology.h
AgeCommit message (Collapse)AuthorFilesLines
2012-11-23s390/topology: cleanup topology codeHeiko Carstens1-16/+18
Mainly merge all different per-cpu arrays into a single array which holds all topology information per logical cpu. Also fix the broken core vs socket variable naming and simplify the locking a bit. When running in environments without topology information also invent book, socket and core ids, so that not all ids are zero. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-11-12s390/topology: fix core id vs physical package id mix-upHeiko Carstens1-0/+3
The current topology code confuses core id vs physical package id. In other words /sys/devices/system/cpu/cpuX/topology/core_id displays the physical_package_id (aka socket id) instead of the core id. The physical_package_id sysfs attribute always displays "-1" instead of the socket id. Fix this mix-up with a small patch which defines and initializes topology_physical_package_id correctly and fixes the broken core id handling. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-09-26s390/smp,topology: add polarization member to pcpu structHeiko Carstens1-18/+0
The cpu polarization member is the only per cpu state that is not part of the pcpu structure. So add it there and have everything in one place. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-09-26s390/topology: remove sysinfo header include, add forward declaration insteadHeiko Carstens1-1/+1
Any change to sysinfo.h causes a whole kernel recompile since sysinfo.h is included by topology.h, which again is used nearly everywhere. So remove that include and add a forward declaration instead. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-12-27[S390] topology: increase poll frequency if change is anticipatedHeiko Carstens1-0/+2
Increase cpu topology change poll frequency if a change is anticipated. Otherwise a user might be a bit confused to have to wait up to a minute in order to see a change this should be visible immediatly. However there is no guarantee that the change will happen during the time frame the poll frequency is increased. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-12-27[S390] topology: get rid of ifdefsHeiko Carstens1-6/+32
Remove all ifdefs from topology code and also only compile it for the CONFIG_SCHED_BOOK case. The new code selects SCHED_MC if SCHED_BOOK is selected. SCHED_MC without SCHED_BOOK is not possible anymore. Furthermore various sysfs attributes are not available anymore for the !SCHED_BOOK case. In particular all attributes that correspond to CPU polarization. But since all real world kernels have SCHED_BOOK selected anyway this doesn't matter too much. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-05-26[S390] topology,sched: fix cpu_coregroup_mask/cpu_book_mask definitionsHeiko Carstens1-2/+2
Both functions take an int instead of an unsigned int. Fixes these compile warnings: kernel/sched.c:7167:2: warning: initialization from incompatible pointer type kernel/sched.c:7170:2: warning: initialization from incompatible pointer type Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-10-25[S390] topology: export cpu topology via proc/sysinfoHeiko Carstens1-0/+2
Export the cpu configuration topology via sysinfo. Two new lines are introduced: CPU Topology HW: 0 0 0 4 6 4 CPU Topology SW: 0 0 0 0 4 24 The HW line describes the cpu topology nesting levels when the maximum nesting level is used to get the corresponding SYSIB. The SW line describes what Linux is actually using. In this case it supports only two levels (CONFIG_SCHED_BOOK off) and therefore the hardware folded the two lower levels in the SYSIB response block. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-09-09topology, s390: Add z11 cpu topology supportHeiko Carstens1-4/+23
Use the extended cpu topology information that z11 machines provide to improve the scheduler's decision making. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <20100831082844.604956770@de.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-08-09[S390] topology: use default MC domain initializerHeiko Carstens1-2/+0
Use default MC sched domain initializer, since performance meassurements finally showed that this is indeed better. Besides the fact that the powersavings flags functions didn't make too much sense, but were unused anyway. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-05-17[S390] topology: expose core identifierHeiko Carstens1-0/+2
Provide a topology_core_id define which makes sure that the contents of /sys/devices/system/cpu/cpuX/topology/core_id indeed do contain the core id and not always 0. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-09-24cpumask: remove obsolete topology_core_siblings and ↵Rusty Russell1-1/+0
topology_thread_siblings: s390 There were replaced by topology_core_cpumask and topology_thread_cpumask. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2009-03-26[S390] cpumask: remove cpu_coregroup_mapRusty Russell1-1/+0
Impact: cleanup cpu_coregroup_mask is the New Hotness. As S/390 uses theirs internally, so we just make it static. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-03-18[S390] topology: define SD_MC_INIT to fix performance regressionHeiko Carstens1-0/+2
The default values for SD_MC_INIT cause an additional cpu usage of up to 40% on some network benchmarks compared to the plain SD_CPU_INIT values. So just define SD_MC_INIT to SD_CPU_INIT. More tuning needs to be done. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-01-01cpumask: Introduce topology_core_cpumask()/topology_thread_cpumask(): s390Rusty Russell1-0/+1
Impact: New API The old topology_core_siblings() and topology_thread_siblings() return a cpumask_t; these new ones return a (const) struct cpumask *. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Mike Travis <travis@sgi.com>
2008-12-26cpumask: cpu_coregroup_mask(): s390Rusty Russell1-0/+1
Like cpu_coregroup_map, but returns a (const) pointer. Compile-tested on s390 (defconfig). Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Mike Travis <travis@sgi.com>
2008-08-01[S390] move include/asm-s390 to arch/s390/include/asmMartin Schwidefsky1-0/+33
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-08-03 10:30:42 +0000