summaryrefslogtreecommitdiffstats
path: root/arch/riscv/lib
AgeCommit message (Collapse)AuthorFilesLines
2022-03-10riscv: Fixed misaligned memory access. Fixed pointer comparison.Michael T. Kloos1-58/+310
Rewrote the RISC-V memmove() assembly implementation. The previous implementation did not check memory alignment and it compared 2 pointers with a signed comparison. The misaligned memory access would cause the kernel to crash on systems that did not emulate it in firmware and did not support it in hardware. Firmware emulation is slow and may not exist. The RISC-V spec does not guarantee that support for misaligned memory accesses will exist. It should not be depended on. This patch now checks for XLEN granularity of co-alignment between the pointers. Failing that, copying is done by loading from the 2 contiguous and naturally aligned XLEN memory locations containing the overlapping XLEN sized data to be copied. The data is shifted into the correct place and binary or'ed together on each iteration. The result is then stored into the corresponding naturally aligned XLEN sized location in the destination. For unaligned data at the terminations of the regions to be copied or for copies less than (2 * XLEN) in size, byte copy is used. This patch also now uses unsigned comparison for the pointers and migrates to the newer assembler annotations from the now deprecated ones. Signed-off-by: Michael T. Kloos <michael@michaelkloos.com> Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-01-05riscv: extable: consolidate definitionsJisheng Zhang1-4/+2
This is a riscv port of commit 819771cc2892 ("arm64: extable: consolidate definitions"). Signed-off-by: Jisheng Zhang <jszhang@kernel.org> Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-01-05riscv: lib: uaccess: fold fixups into bodyJisheng Zhang1-11/+11
uaccess functions such __asm_copy_to_user(), __arch_copy_from_user() and __clear_user() place their exception fixups in the `.fixup` section without any clear association with themselves. If we backtrace the fixup code, it will be symbolized as an offset from the nearest prior symbol. Similar as arm64 does, we must move fixups into the body of the functions themselves, after the usual fast-path returns. Signed-off-by: Jisheng Zhang <jszhang@kernel.org> Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-01-05riscv: switch to relative exception tablesJisheng Zhang1-2/+2
Similar as other architectures such as arm64, x86 and so on, use offsets relative to the exception table entry values rather than absolute addresses for both the exception locationand the fixup. However, RISCV label difference will actually produce two relocations, a pair of R_RISCV_ADD32 and R_RISCV_SUB32. Take below simple code for example: $ cat test.S .section .text 1: nop .section __ex_table,"a" .balign 4 .long (1b - .) .previous $ riscv64-linux-gnu-gcc -c test.S $ riscv64-linux-gnu-readelf -r test.o Relocation section '.rela__ex_table' at offset 0x100 contains 2 entries: Offset Info Type Sym. Value Sym. Name + Addend 000000000000 000600000023 R_RISCV_ADD32 0000000000000000 .L1^B1 + 0 000000000000 000500000027 R_RISCV_SUB32 0000000000000000 .L0 + 0 The modpost will complain the R_RISCV_SUB32 relocation, so we need to patch modpost.c to skip this relocation for .rela__ex_table section. After this patch, the __ex_table section size of defconfig vmlinux is reduced from 7072 Bytes to 3536 Bytes. Signed-off-by: Jisheng Zhang <jszhang@kernel.org> Reviewed-by: Kefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2021-11-09include/linux/delay.h: replace kernel.h with the necessary inclusionsAndy Shevchenko1-0/+4
When kernel.h is used in the headers it adds a lot into dependency hell, especially when there are circular dependencies are involved. Replace kernel.h inclusion with the list of what is really being used. [akpm@linux-foundation.org: cxd2880_common.h needs bits.h for GENMASK()] [andriy.shevchenko@linux.intel.com: delay.h: fix for removed kernel.h] Link: https://lkml.kernel.org/r/20211028170143.56523-1-andriy.shevchenko@linux.intel.com [akpm@linux-foundation.org: include/linux/fwnode.h needs bits.h for BIT()] Link: https://lkml.kernel.org/r/20211027150324.79827-1-andriy.shevchenko@linux.intel.com Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-07-23riscv: __asm_copy_to-from_user: Fix: Typos in commentsAkira Tsukamoto1-9/+9
Fixing typos and grammar mistakes and using more intuitive label name. Signed-off-by: Akira Tsukamoto <akira.tsukamoto@gmail.com> Fixes: ca6eaaa210de ("riscv: __asm_copy_to-from_user: Optimize unaligned memory access and pipeline stall") Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2021-07-23riscv: __asm_copy_to-from_user: Remove unnecessary size checkAkira Tsukamoto1-1/+0
Clean up: The size of 0 will be evaluated in the next step. Not required here. Signed-off-by: Akira Tsukamoto <akira.tsukamoto@gmail.com> Fixes: ca6eaaa210de ("riscv: __asm_copy_to-from_user: Optimize unaligned memory access and pipeline stall") Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2021-07-23riscv: __asm_copy_to-from_user: Fix: fail on RV32Akira Tsukamoto1-1/+1
Had a bug when converting bytes to bits when the cpu was rv32. The a3 contains the number of bytes and multiple of 8 would be the bits. The LGREG is holding 2 for RV32 and 3 for RV32, so to achieve multiple of 8 it must always be constant 3. The 2 was mistakenly used for rv32. Signed-off-by: Akira Tsukamoto <akira.tsukamoto@gmail.com> Fixes: ca6eaaa210de ("riscv: __asm_copy_to-from_user: Optimize unaligned memory access and pipeline stall") Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2021-07-23riscv: __asm_copy_to-from_user: Fix: overrun copyAkira Tsukamoto1-3/+3
There were two causes for the overrun memory access. The threshold size was too small. The aligning dst require one SZREG and unrolling word copy requires 8*SZREG, total have to be at least 9*SZREG. Inside the unrolling copy, the subtracting -(8*SZREG-1) would make iteration happening one extra loop. Proper value is -(8*SZREG). Signed-off-by: Akira Tsukamoto <akira.tsukamoto@gmail.com> Fixes: ca6eaaa210de ("riscv: __asm_copy_to-from_user: Optimize unaligned memory access and pipeline stall") Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2021-07-06riscv: __asm_copy_to-from_user: Optimize unaligned memory access and ↵Akira Tsukamoto1-35/+146
pipeline stall This patch will reduce cpu usage dramatically in kernel space especially for application which use sys-call with large buffer size, such as network applications. The main reason behind this is that every unaligned memory access will raise exceptions and switch between s-mode and m-mode causing large overhead. First copy in bytes until reaches the first word aligned boundary in destination memory address. This is the preparation before the bulk aligned word copy. The destination address is aligned now, but oftentimes the source address is not in an aligned boundary. To reduce the unaligned memory access, it reads the data from source in aligned boundaries, which will cause the data to have an offset, and then combines the data in the next iteration by fixing offset with shifting before writing to destination. The majority of the improving copy speed comes from this shift copy. In the lucky situation that the both source and destination address are on the aligned boundary, perform load and store with register size to copy the data. Without the unrolling, it will reduce the speed since the next store instruction for the same register using from the load will stall the pipeline. At last, copying the remainder in one byte at a time. Signed-off-by: Akira Tsukamoto <akira.tsukamoto@gmail.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2021-01-14riscv: Add support for function error injectionGuo Ren2-0/+12
Inspired by the commit 42d038c4fb00 ("arm64: Add support for function error injection"), this patch supports function error injection for riscv. This patch mainly support two functions: one is regs_set_return_value() which is used to overwrite the return value; the another function is override_function_with_return() which is to override the probed function returning and jump to its caller. Test log: cd /sys/kernel/debug/fail_function echo sys_clone > inject echo 100 > probability echo 1 > interval ls / [ 313.176875] FAULT_INJECTION: forcing a failure. [ 313.176875] name fail_function, interval 1, probability 100, space 0, times 1 [ 313.184357] CPU: 0 PID: 87 Comm: sh Not tainted 5.8.0-rc5-00007-g6a758cc #117 [ 313.187616] Call Trace: [ 313.189100] [<ffffffe0002036b6>] walk_stackframe+0x0/0xc2 [ 313.191626] [<ffffffe00020395c>] show_stack+0x40/0x4c [ 313.193927] [<ffffffe000556c60>] dump_stack+0x7c/0x96 [ 313.194795] [<ffffffe0005522e8>] should_fail+0x140/0x142 [ 313.195923] [<ffffffe000299ffc>] fei_kprobe_handler+0x2c/0x5a [ 313.197687] [<ffffffe0009e2ec4>] kprobe_breakpoint_handler+0xb4/0x18a [ 313.200054] [<ffffffe00020357e>] do_trap_break+0x36/0xca [ 313.202147] [<ffffffe000201bca>] ret_from_exception+0x0/0xc [ 313.204556] [<ffffffe000201bbc>] ret_from_syscall+0x0/0x2 -sh: can't fork: Invalid argument Signed-off-by: Guo Ren <guoren@linux.alibaba.com> Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: Palmer Dabbelt <palmerdabbelt@google.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-12-10riscv: provide memmove implementationNylon Chen2-0/+65
The memmove used by the kernel feature like KASAN. Signed-off-by: Nick Hu <nickhu@andestech.com> Signed-off-by: Nick Hu <nick650823@gmail.com> Signed-off-by: Nylon Chen <nylon7@andestech.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-10-04riscv: use memcpy based uaccess for nommu againChristoph Hellwig1-1/+1
This reverts commit adccfb1a805ea84d2db38eb53032533279bdaa97. Now that the generic uaccess by mempcy code handles unaligned addresses the generic code can be used for all RISC-V CPUs. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-04-09Merge tag 'riscv-for-linus-5.7' of ↵Linus Torvalds1-4/+2
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull RISC-V updates from Palmer Dabbelt: "This contains a handful of new features: - Partial support for the Kendryte K210. There are still a few outstanding issues that I have patches for, but I don't actually have a board to test them so they're not included yet. - SBI v0.2 support. - Fixes to support for building with LLVM-based toolchains. The resulting images are known not to boot yet. I don't anticipate a part two, but I'll probably have something early in the RCs to finish up the K210 support" * tag 'riscv-for-linus-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (38 commits) riscv: create a loader.bin boot image for Kendryte SoC riscv: Kendryte K210 default config riscv: Add Kendryte K210 device tree riscv: Select required drivers for Kendryte SOC riscv: Add Kendryte K210 SoC support riscv: Add SOC early init support riscv: Unaligned load/store handling for M_MODE RISC-V: Support cpu hotplug RISC-V: Add supported for ordered booting method using HSM RISC-V: Add SBI HSM extension definitions RISC-V: Export SBI error to linux error mapping function RISC-V: Add cpu_ops and modify default booting method RISC-V: Move relocate and few other functions out of __init RISC-V: Implement new SBI v0.2 extensions RISC-V: Introduce a new config for SBI v0.1 RISC-V: Add SBI v0.2 extension definitions RISC-V: Add basic support for SBI v0.2 RISC-V: Mark existing SBI as 0.1 SBI. riscv: Use macro definition instead of magic number riscv: Add support to dump the kernel page tables ...
2020-03-18riscv: uaccess should be used in nommu modeGreentime Hu1-1/+1
It might have the unaligned access exception when trying to exchange data with user space program. In this case, it failed in tty_ioctl(). Therefore we should enable uaccess.S for NOMMU mode since the generic code doesn't handle the unaligned access cases. 0x8013a212 <tty_ioctl+462>: ld a5,460(s1) [ 0.115279] Oops - load address misaligned [#1] [ 0.115284] CPU: 0 PID: 29 Comm: sh Not tainted 5.4.0-rc5-00020-gb4c27160d562-dirty #36 [ 0.115294] epc: 000000008013a212 ra : 000000008013a212 sp : 000000008f48dd50 [ 0.115303] gp : 00000000801cac28 tp : 000000008fb80000 t0 : 00000000000000e8 [ 0.115312] t1 : 000000008f58f108 t2 : 0000000000000009 s0 : 000000008f48ddf0 [ 0.115321] s1 : 000000008f8c6220 a0 : 0000000000000001 a1 : 000000008f48dd28 [ 0.115330] a2 : 000000008fb80000 a3 : 00000000801a7398 a4 : 0000000000000000 [ 0.115339] a5 : 0000000000000000 a6 : 000000008f58f0c6 a7 : 000000000000001d [ 0.115348] s2 : 000000008f8c6308 s3 : 000000008f78b7c8 s4 : 000000008fb834c0 [ 0.115357] s5 : 0000000000005413 s6 : 0000000000000000 s7 : 000000008f58f2b0 [ 0.115366] s8 : 000000008f858008 s9 : 000000008f776818 s10: 000000008f776830 [ 0.115375] s11: 000000008fb840a8 t3 : 1999999999999999 t4 : 000000008f78704c [ 0.115384] t5 : 0000000000000005 t6 : 0000000000000002 [ 0.115391] status: 0000000200001880 badaddr: 000000008f8c63ec cause: 0000000000000004 [ 0.115401] ---[ end trace 00d490c6a8b6c9ac ]--- This failure could be fixed after this patch applied. [ 0.002282] Run /init as init process Initializing random number generator... [ 0.005573] random: dd: uninitialized urandom read (512 bytes read) done. Welcome to Buildroot buildroot login: root Password: Jan 1 00:00:00 login[62]: root login on 'ttySIF0' ~ # Signed-off-by: Greentime Hu <greentime.hu@sifive.com> Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-03-03RISC-V: Stop using LOCAL for the uaccess fixupsPalmer Dabbelt1-4/+2
LLVM's integrated assembler doesn't support the LOCAL directive, which we're using when generating our uaccess fixup tables. Luckily the table fragment is small enough that there's only one internal symbol, so using a relative symbol reference doesn't really complicate anything. Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-01-22riscv: Add KASAN supportNick Hu2-4/+6
This patch ports the feature Kernel Address SANitizer (KASAN). Note: The start address of shadow memory is at the beginning of kernel space, which is 2^64 - (2^39 / 2) in SV39. The size of the kernel space is 2^38 bytes so the size of shadow memory should be 2^38 / 8. Thus, the shadow memory would not overlap with the fixmap area. There are currently two limitations in this port, 1. RV64 only: KASAN need large address space for extra shadow memory region. 2. KASAN can't debug the modules since the modules are allocated in VMALLOC area. We mapped the shadow memory, which corresponding to VMALLOC area, to the kasan_early_shadow_page because we don't have enough physical space for all the shadow memory corresponding to VMALLOC area. Signed-off-by: Nick Hu <nickhu@andestech.com> Reported-by: Greentime Hu <green.hu@gmail.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-01-18riscv: Less inefficient gcc tishift helpers (and export their symbols)Olof Johansson1-18/+57
The existing __lshrti3 was really inefficient, and the other two helpers are also needed to compile some modules. Add the missing versions, and export all of the symbols like arm64 already does. This code is based on the assembly generated by libgcc builds. This fixes a build break triggered by ubsan: riscv64-unknown-linux-gnu-ld: lib/ubsan.o: in function `.L2': ubsan.c:(.text.unlikely+0x38): undefined reference to `__ashlti3' riscv64-unknown-linux-gnu-ld: ubsan.c:(.text.unlikely+0x42): undefined reference to `__ashrti3' Signed-off-by: Olof Johansson <olof@lixom.net> [paul.walmsley@sifive.com: use SYM_FUNC_{START,END} instead of ENTRY/ENDPROC; note libgcc origin] Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
2019-12-27riscv: fix compile failure with EXPORT_SYMBOL() & !MMULuc Van Oostenryck1-0/+4
When support for !MMU was added, the declaration of __asm_copy_to_user() & __asm_copy_from_user() were #ifdefed out hence their EXPORT_SYMBOL() give an error message like: .../riscv_ksyms.c:13:15: error: '__asm_copy_to_user' undeclared here .../riscv_ksyms.c:14:15: error: '__asm_copy_from_user' undeclared here Since these symbols are not defined with !MMU it's wrong to export them. Same for __clear_user() (even though this one is also declared in include/asm-generic/uaccess.h and thus doesn't give an error message). Fix this by doing the EXPORT_SYMBOL() directly where these symbols are defined: inside lib/uaccess.S itself. Fixes: 6bd33e1ece52 ("riscv: fix compile failure with EXPORT_SYMBOL() & !MMU") Reported-by: kbuild test robot <lkp@intel.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com> Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
2019-11-17riscv: add nommu supportChristoph Hellwig1-6/+5
The kernel runs in M-mode without using page tables, and thus can't run bare metal without help from additional firmware. Most of the patch is just stubbing out code not needed without page tables, but there is an interesting detail in the signals implementation: - The normal RISC-V syscall ABI only implements rt_sigreturn as VDSO entry point, but the ELF VDSO is not supported for nommu Linux. We instead copy the code to call the syscall onto the stack. In addition to enabling the nommu code a new defconfig for a small kernel image that can run in nommu mode on qemu is also provided, to run a kernel in qemu you can use the following command line: qemu-system-riscv64 -smp 2 -m 64 -machine virt -nographic \ -kernel arch/riscv/boot/loader \ -drive file=rootfs.ext2,format=raw,id=hd0 \ -device virtio-blk-device,drive=hd0 Contains contributions from Damien Le Moal <Damien.LeMoal@wdc.com>. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Anup Patel <anup@brainfault.org> [paul.walmsley@sifive.com: updated to apply; add CONFIG_MMU guards around PCI_IOBASE definition to fix build issues; fixed checkpatch issues; move the PCI_IO_* and VMEMMAP address space macros along with the others; resolve sparse warning] Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
2019-11-05riscv: abstract out CSR names for supervisor vs machine modeChristoph Hellwig1-6/+6
Many of the privileged CSRs exist in a supervisor and machine version that are used very similarly. Provide versions of the CSR names and fields that map to either the S-mode or M-mode variant depending on a new CONFIG_RISCV_M_MODE kconfig symbol. Contains contributions from Damien Le Moal <Damien.LeMoal@wdc.com> and Paul Walmsley <paul.walmsley@sifive.com>. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Thomas Gleixner <tglx@linutronix.de> # for drivers/clocksource, drivers/irqchip [paul.walmsley@sifive.com: updated to apply] Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
2019-08-30riscv: Using CSR numbers to access CSRsBin Meng1-6/+6
Since commit a3182c91ef4e ("RISC-V: Access CSRs using CSR numbers"), we should prefer accessing CSRs using their CSR numbers, but there are several leftovers like sstatus / sptbr we missed. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Anup Patel <anup@brainfault.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
2019-08-08RISC-V: Remove udivdi3Palmer Dabbelt2-34/+0
This should never have landed in the first place: it was added as part of 64-bit divide support for 32-bit systems, but the kernel doesn't allow this sort of division. I must have forgotten to remove it. This patch removes the support. Since this routine only worked on 64-bit platforms but was only built on 32-bit platforms, it's essentially just nonsense anyway. Signed-off-by: Palmer Dabbelt <palmer@sifive.com> Acked-by: Nicolas Pitre <nico@fluxnic.net> Link: https://lore.kernel.org/linux-riscv/nycvar.YSQ.7.76.1908061413360.19480@knanqh.ubzr/T/#t Reported-by: Eric Lin <tesheng@andestech.com> Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
2019-08-08riscv: delay: use do_div() instead of __udivdi3()Paul Walmsley1-1/+5
In preparation for removing __udivdi3() from the RISC-V architecture-specific files, convert its one user to use do_div(). This avoids breaking the RV32 build after __udivdi3() is removed. This second version removes the assignment of the remainder to an unused temporary variable. Thanks to Nicolas Pitre <nico@fluxnic.net> for the suggestion. Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com> Cc: Nicolas Pitre <nico@fluxnic.net>
2019-06-17Merge tag 'riscv-for-v5.2/fixes-rc6' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull RISC-V fixes from Paul Walmsley: "This contains fixes, defconfig, and DT data changes for the v5.2-rc series. The fixes are relatively straightforward: - Addition of a TLB fence in the vmalloc_fault path, so the CPU doesn't enter an infinite page fault loop - Readdition of the pm_power_off export, so device drivers that reassign it can now be built as modules - A udelay() fix for RV32, fixing a miscomputation of the delay time - Removal of deprecated smp_mb__*() barriers This also adds initial DT data infrastructure for arch/riscv, along with initial data for the SiFive FU540-C000 SoC and the corresponding HiFive Unleashed board. We also update the RV64 defconfig to include some core drivers for the FU540 in the build" * tag 'riscv-for-v5.2/fixes-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: riscv: remove unused barrier defines riscv: mm: synchronize MMU after pte change riscv: dts: add initial board data for the SiFive HiFive Unleashed riscv: dts: add initial support for the SiFive FU540-C000 SoC dt-bindings: riscv: convert cpu binding to json-schema dt-bindings: riscv: sifive: add YAML documentation for the SiFive FU540 arch: riscv: add support for building DTB files from DT source data riscv: Fix udelay in RV32. riscv: export pm_power_off again RISC-V: defconfig: enable clocks, serial console
2019-06-11riscv: Fix udelay in RV32.Nick Hu1-1/+1
In RV32, udelay would delay the wrong cycle. When it shifts right "UDELAY_SHIFT" bits, it either delays 0 cycle or 1 cycle. It only works correctly in RV64. Because the 'ucycles' always needs to be 64 bits variable. Signed-off-by: Nick Hu <nickhu@andestech.com> Reviewed-by: Palmer Dabbelt <palmer@sifive.com> [paul.walmsley@sifive.com: fixed minor spelling error] Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 286Thomas Gleixner5-45/+5
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation version 2 this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 97 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190529141901.025053186@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner1-0/+1
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-21RISC-V: lib: minor asm cleanupOlof Johansson2-48/+53
Fix tab/space conversion and use ENTRY/ENDPROC macros. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-11-12RISC-V: lib: Fix build error for 64-bitOlof Johansson1-1/+1
Fixes the following build error from tinyconfig: riscv64-unknown-linux-gnu-ld: kernel/sched/fair.o: in function `.L8': fair.c:(.text+0x70): undefined reference to `__lshrti3' riscv64-unknown-linux-gnu-ld: kernel/time/clocksource.o: in function `.L0 ': clocksource.c:(.text+0x334): undefined reference to `__lshrti3' Fixes: 7f47c73b355f ("RISC-V: Build tishift only on 64-bit") Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-10-22RISC-V: Build tishift only on 64-bitZong Li1-1/+2
Only RV64 supports 128 integer size. Signed-off-by: Zong Li <zong@andestech.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-08-13RISC-V: implement __lshrti3.Alex Guo2-0/+43
Signed-off-by: Alex Guo <xfguo@jlsemi.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-06-11RISC-V: Make our port sparse-cleanPalmer Dabbelt1-2/+4
This patch set contains a handful of fixes that clean up the sparse results for the RISC-V port. These patches shouldn't have any functional difference. The patches: * Use NULL instead of 0. * Clean up __user annotations. * Split __copy_user into two functions, to make the __user annotations valid. Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com>
2018-06-09riscv: split the declaration of __copy_userLuc Van Oostenryck1-2/+4
We use a single __copy_user assembly function to copy memory both from and to userspace. While this works, it triggers sparse errors because we're implicitly casting between the kernel and user address spaces by calling __copy_user. This patch splits the C declaration into a pair of functions, __asm_copy_{to,from}_user, that have sane semantics WRT __user. This split make things fine from sparse's point of view. The assembly implementation keeps a single definition but add a double ENTRY() for it, one for __asm_copy_to_user and another one for __asm_copy_from_user. The result is a spare-safe implementation that pays no performance or code size penalty. Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-06-04riscv: Fix the bug in memory access fixup codeAlan Kao1-4/+9
A piece of fixup code is currently shared by __copy_user and __clear_user. It first disables the access to user-space memory and then returns the "n" argument, which represents #(bytes not processed). However,__copy_user's "n" is in register a2, while __clear_user's in a1, and thus it causes errors for programs like setdomainname02 testcase in LTP. This patch fixes this issue by separating their fixup code and returning the right value for the kernel to handle a relative fault properly. Signed-off-by: Alan Kao <alankao@andestech.com> Cc: Greentime Hu <greentime@andestech.com> Cc: Zong Li <zong@andestech.com> Cc: Vincent Chen <vincentc@andestech.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2017-11-30RISC-V: Export some expected symbols for modulesOlof Johansson1-0/+1
These are the ones needed by current allmodconfig, so add them instead of everything other architectures are exporting -- the rest can be added on demand later if needed. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2017-09-26RISC-V: Build InfrastructurePalmer Dabbelt1-0/+6
This patch contains all the build infrastructure that actually enables the RISC-V port. This includes Makefiles, linker scripts, and Kconfig files. It also contains the only top-level change, which adds RISC-V to the list of architectures that need a sed run to produce the ARCH variable when building locally. Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com>
2017-09-26RISC-V: Device, timer, IRQs, and the SBIPalmer Dabbelt1-0/+110
This patch contains code that interfaces with devices that are mandated by the RISC-V supervisor specification and that don't have explicit drivers anywhere else in the tree. This includes the staticly defined interrupts, the CSR-mapped timer, and virtualized SBI devices. Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com>
2017-09-26RISC-V: Generic library routines and assemblyPalmer Dabbelt4-0/+390
This patch contains code that is more specific to the RISC-V ISA than it is to Linux. It contains string and math operations, C wrappers for various assembly instructions, stack walking code, and uaccess. Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-14 19:30:42 +0000