summaryrefslogtreecommitdiffstats
path: root/arch/ppc/platforms/4xx
AgeCommit message (Collapse)AuthorFilesLines
2007-12-07[POWERPC] virtex bug fix: Use canonical value for AC97 interrupt xparamsGrant Likely1-0/+8
The ml300 and ml403 xparameters.h files use different macros for the AC97 interrupt pin assignments. This normalizes them to a canonical value similar to what EDK generates for most other devices. This is needed to get ml300 support to compile in arch/ppc. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Josh Boyer <jwboyer@linux.vnet.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-11-19[POWERPC] 4xx: balance ioremap/ioumap calls for YuccaRoel Kluin1-0/+1
Call iounmap before returning from an error case. Signed-off-by: Roel Kluin <12o3l@tiscali.nl> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2007-11-01[POWERPC] 4xx: Fix 4xx flush_tlb_page()Benjamin Herrenschmidt3-3/+3
On 4xx CPUs, the current implementation of flush_tlb_page() uses a low level _tlbie() assembly function that only works for the current PID. Thus, invalidations caused by, for example, a COW fault triggered by get_user_pages() from a different context will not work properly, causing among other things, gdb breakpoints to fail. This patch adds a "pid" argument to _tlbie() on 4xx processors, and uses it to flush entries in the right context. FSL BookE also gets the argument but it seems they don't need it (their tlbivax form ignores the PID when invalidating according to the document I have). Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2007-11-01[POWERPC] allocation fix in ppc/platforms/4xx/luan.cRoel Kluin1-1/+6
Don't allocate hose2 when when hose1 can't be allocated and free hose1 when hose2 can't be allocated. Signed-off-by: Roel Kluin <12o3l@tiscali.nl> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2007-07-18serial: add early_serial_setup() back to header fileYinghai Lu8-0/+8
early_serial_setup was removed from serial.h, but forgot to put in serial_8250.h Signed-off-by: Yinghai Lu <yinghai.lu@sun.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-12[POWERPC] Spelling fixes: arch/ppc/Simon Arlott5-5/+5
Spelling fixes in arch/ppc/. Signed-off-by: Simon Arlott <simon@fire.lp0.eu> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-30[POWERPC] Don't define a custom bd_t for Xilixn Virtex based boards.Grant Likely1-14/+1
Why create a platform specific board_info structure that is hacked together, ugly, and dangerous, when we've got a perfectly fine common board_info structure that is hacked-together, ugly and dangerous. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-30[POWERPC] Add sane defaults for Xilinx EDK generated xparameters filesGrant Likely1-0/+60
Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-30[POWERPC] Stop using ppc_sys for Xilinx Virtex boardsGrant Likely5-184/+9
The arch/ppc/syslib/ppc_sys.c infrastructure does not work well for the virtex ports. Move the ml300 and ml403 board ports over to use the new virtex_devices infrastructure. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-30[POWERPC] Merge common virtex header filesGrant Likely5-105/+31
The header files for the ml403 and ml300 are virtually identical, merge them into a single file. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-30[POWERPC] Rework Kconfig dependancies for Xilinx Virtex ppc405 platformGrant Likely1-8/+7
Reverse dependency order for Xilinx Virtex parts. For these parts, It makes more sense for boards/chips to specify which features they provide instead of the features listing the parts they are implemented in. I think it also makes adding new board ports simpler. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-13[POWERPC] Ocotea board: ntpd complains that the frequency error exceeds the ↵Bart Van Assche1-1/+1
tolerance Lifted from http://bugzilla.kernel.org/show_bug.cgi?id=8182 Steps to reproduce: - Boot an Ocotea board with the mainline 2.6.20.1 kernel. - Create an /etc/ntp.conf file with at least one NTP server and iburst mode set. - Issue the command "ntpd -g". - Wait about two minutes. - Verify ntpd's status via "ntpq -pn" and by looking in /var/log/ntp. This fixes this problem by adjusting the expected clock frequency. Cc: Kumar Gala <galak@gate.crashing.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-03-26[POWERPC] ppc: Fix PCIX configuration of Ocotea & Taishan for > 512MB DDRStefan Roese2-2/+2
Change the configuration of the PCIX PCI->PLB inbound memory window to be 2GB instead of 512kB. The comment already mentioned 2GB, but the code unfortunately didn't reflect this. Signed-off-by: Stefan Roese <sr@denx.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-13[POWERPC] ppc: Add support for AMCC Taishan 440GX eval boardStefan Roese4-2/+471
This patch adds support for the AMCC Taishan PPC440GX evaluation board. This is still an arch/ppc port. I'm aware that the move of 4xx to arch/powerpc is making good progress right now. So this patch is mainly intended to make the Taishan support available for the community right now. Signed-off-by: Stefan Roese <sr@denx.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-12-12kconfig: Standardize "depends" -> "depends on" in Kconfig filesRobert P. J. Day1-1/+1
Standardize the miniscule percentage of occurrences of "depends" in Kconfig files to "depends on", and update kconfig-language.txt to reflect that. Signed-off-by: Robert P. J. Day <rpjday@mindspring.com> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-12-04[POWERPC] Compilation fixes for ppc4xx PCI-less configsWojtek Kaniewski3-0/+6
Fix compilation without PCI support for Bubinga, CPCI405 and EP405. bios_fixup() for these boards uses functions available only with CONFIG_PCI, so linker fails. Signed-off-by: Wojtek Kaniewski <wojtekka@toxygen.net> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-10-04Remove all inclusions of <linux/config.h>Dave Jones1-1/+0
kbuild explicitly includes this at build time. Signed-off-by: Dave Jones <davej@redhat.com>
2006-10-03fix file specification in commentsUwe Zeisberger1-1/+1
Many files include the filename at the beginning, serveral used a wrong one. Signed-off-by: Uwe Zeisberger <Uwe_Zeisberger@digi.com> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-06-30Remove obsolete #include <linux/config.h>Jörn Engel38-38/+0
Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-06-15[POWERPC] ppc32: fix CPCI405 board supportMatthias Fuchs3-31/+140
Hi, this patch brings the CPCI405 board support up to date and fixes several outstanding issues: -add bios_fixup() -enable RTC only when CONFIG_GEN_RTC defined -corrected CompactPCI interrupt map -added cpci405_early_serial_map for correct UART clocking -removed unused code Matthias Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-04-28[PATCH] ppc32: add 440GX erratum 440_43 workaroundEugene Surovegin1-1/+1
This patch adds workaround for PPC 440GX erratum 440_43. According to this erratum spurious MachineChecks (caused by L1 cache parity) can happen during DataTLB miss processing. We disable L1 cache parity checking for 440GX rev.C and rev.F Signed-off-by: Eugene Surovegin <ebs@ebshome.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-03-17[PATCH] Fix compile error for ML300/403Grant Likely1-1/+1
Needed due to changes in ppc_sys.c. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-02-10[PATCH] powerpc: trivial: modify comments to refer to new location of filesJon Mason45-90/+0
This patch removes all self references and fixes references to files in the now defunct arch/ppc64 tree. I think this accomplises everything wanted, though there might be a few references I missed. Signed-off-by: Jon Mason <jdmason@us.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-02-10Merge ../powerpc-mergePaul Mackerras6-12/+12
2006-02-07[PATCH] powerpc: Add support for Xilinx ML403 reference designGrant C. Likely5-2/+241
Includes fix for Xilinx silicon errata 213 Signed-off-by: Grant C. Likely <grant.likely@secretlab.ca> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-02-07[PATCH] powerpc: Add xparameters file for Xilinx ML403 reference designGrant C. Likely1-0/+243
Signed-off-by: Grant C. Likely <grant.likely@secretlab.ca> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-02-07[PATCH] powerpc: Migrate ML300 reference design to the platform busGrant C. Likely2-23/+53
Signed-off-by: Grant C. Likely <grant.likely@secretlab.ca> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-02-07[PATCH] powerpc: Migrate Xilinx Vertex support from the OCP bus to the ↵Grant C. Likely4-128/+72
platfom bus. This patch only deals with the serial port definitions as there is no support for any other xilinx IP cores in the kernel tree at the moment. Board specific configuration moved out of virtex.[ch] and into the xparameters.h wrapper. This also prepares for the transition to the flattened device tree model. When the bootloader provides a device tree generated from an xparameters.h files, the kernel will no longer need xparameters/*. The platform bus will get populated with data from the device tree, and the device drivers will be automatically connected to the devices. Only the bootloader (or ppcboot) will need xparameters directly. Signed-off-by: Grant C. Likely <grant.likely@secretlab.ca> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-02-07[PATCH] powerpc: Make Virtex-II Pro support generic for all Virtex devicesGrant C. Likely6-10/+15
The PPC405 hard core is used in both the Virtex-II Pro and Virtex 4 FX FPGAs. This patch cleans up the Virtex naming convention to reflect more than just the Virtex-II Pro. Rename files virtex-ii_pro.[ch] to virtex.[ch] Rename config value VIRTEX_II_PRO to XILINX_VIRTEX Signed-off-by: Grant C. Likely <grant.likely@secretlab.ca> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-02-07[PATCH] powerpc: Move xparameters.h into xilinx virtex device specific pathGrant C. Likely2-1/+19
xparameters should not be needed by anything but virtex platform code. Move it from include/asm-ppc/ to platforms/4xx/xparameters/ This is preparing for work to remove xparameters from the dependancy tree for most c files. xparam changes should not cause a recompile of the world. Instead, drivers should get device info from the platform bus (populated by the boot code) Signed-off-by: Grant C. Likely <grant.likely@secretlab.ca> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-02-05[SERIAL] uart_port flags member should use UPF_*Russell King7-7/+7
Convert usage of ASYNC_* to UPF_*. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-02-05[SERIAL] uart_port iotype member should use UPIO_*Russell King7-7/+7
Convert usage of SERIAL_IO_* to UPIO_*. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-06[PATCH] ppc32: remove "jumbo" member from ocp_func_emac_dataEugene Surovegin2-3/+0
Remove the not needed anymore "jumbo" member from ocp_func_emac_data. Jumbo frame support is handled by PPC4xx EMAC driver internally now. Signed-off-by: Eugene Surovegin <ebs@ebshome.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07[PATCH] ppc32: cleanup AMCC PPC40x eval boards to support U-BootMatt Porter8-131/+84
Cleanup PPC40x eval boards (bubinga, walnut and sycamore) to support U-Boot as bootloader. The OpenBIOS bd_info struct is not used in the kernel anymore (only U-Boot now). uImage (U-Boot) tested on walnut, sycamore and bubinga zImage (OpenBIOS) tested on sycamore, bubinga and ebony Signed-off-by: Stefan Roese <sr@denx.de> Signed-off-by: Matt Porter <mporter@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07[PATCH] ppc32: Add Yucca (440SPe eval board) platformRoland Dreier4-2/+516
Add support for AMCC PowerPC 440SPe "Yucca" eval board platform. Signed-off-by: Roland Dreier <rolandd@cisco.com> Cc: Matt Porter <mporter@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07[PATCH] ppc32: Add 440SPe supportRoland Dreier4-2/+221
Add support for the AMCC PowerPC 440SPe SoC, including PCI Express in root port mode. Signed-off-by: Roland Dreier <rolandd@cisco.com> Cc: Matt Porter <mporter@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-31Merge master.kernel.org:/home/rmk/linux-2.6-drvmodelLinus Torvalds4-2/+4
Manual #include fixups for clashes - there may be some unnecessary
2005-10-29Create platform_device.h to contain all the platform device details.Russell King4-2/+4
Convert everyone who uses platform_bus_type to include linux/platform_device.h. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-10-29[PATCH] ppc32: Cleanup AMCC PPC44x eval board U-Boot supportMatt Porter4-54/+17
Cleanup PPC440 eval boards (bamboo, ebony, luan and ocotea) to better support U-Boot as bootloader. Signed-off-by: Stefan Roese <sr@denx.de> Signed-off-by: Matt Porter <mporter@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-12Merge from Linus' treePaul Mackerras4-4/+0
2005-09-30[PATCH] useless includes of linux/irq.h (arch/ppc)Al Viro4-4/+0
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-28[PATCH] ppc32: make cur_cpu_spec a single pointer instead of an arrayKumar Gala1-1/+1
Changed ppc32 so that cur_cpu_spec is just a single pointer for all CPUs. Additionally, made call_setup_cpu check to see if the cpu_setup pointer is NULL or not before calling the function. This lets remove the dummy cpu_setup calls that just return. Signed-off-by: Kumar Gala <kumar.gala@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-09[PATCH] ppc32: Kill PVR_440* definesTom Rini1-9/+4
The following patch changes the usages of PVR_440* into strcmp's with the cpu_name field, and removes the defines altogether. The Ebony portion was briefly tested long ago. One benefit of moving from PVR-tests to string tests in general is that not all CPUs can be on and be able to do this type of comparison. See http://patchwork.ozlabs.org/linuxppc/patch?id=1250 for the original thread. Signed-off-by: Tom Rini <trini@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-05[PATCH] ppc32: add dcr_base field to ocp_func_mal_dataEugene Surovegin8-0/+8
Add dcr_base field to ocp_func_mal_data. This is preparation step for the new EMAC driver. Signed-off-by: Eugene Surovegin <ebs@ebshome.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-05[PATCH] ppc32: move 4xx PHY_MODE_XXX defines to ibm_ocp.hEugene Surovegin4-28/+0
Move 4xx PHY_MODE_XXX defines to asm-ppc/ibm_ocp.h. This is a preparation step for the new EMAC driver. Signed-off-by: Eugene Surovegin <ebs@ebshome.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-05[PATCH] ppc32: disable IBM405_ERR77 and IBM405_ERR51 workarounds for 405EPEugene Surovegin1-2/+2
Disable IBM405_ERR77 and IBM405_ERR51 errata workarounds for 405EP. This chip has these problems fixed. Signed-off-by: Eugene Surovegin <ebs@ebshome.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-05[PATCH] ppc32: fix Bamboo and Luan build warningsEugene Surovegin2-2/+2
Fix STD_UART_OP definitions in Bamboo and Luan board ports which were causing "initialization makes pointer from integer without a cast" warnings. Signed-off-by: Eugene Surovegin <ebs@ebshome.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-05[PATCH] ppc32: fix EMAC Tx channel assignments for NPe405HEugene Surovegin1-3/+3
Fix PowerPC NPe405H EMAC Tx channel assignments. EMAC unit in this chip uses common for 4xx "two Tx / one Rx" configuration. Signed-off-by: Eugene Surovegin <ebs@ebshome.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-05[PATCH] ppc32: add phy excluded features to ocp_func_emac_dataMatt Porter1-8/+44
This patch adds a field to struct ocp_func_emac_data that allows platform-specific unsupported PHY features to be passed in to the ibm_emac ethernet driver. This patch also adds some logic for the Bamboo eval board to populate this field based on the dip switches on the board. This is a workaround for the improperly biased RJ-45 sockets on the Rev. 0 Bamboo. Signed-off-by: Wade Farnsworth <wfarnsworth@mvista.com> Signed-off-by: Matt Porter <mporter@kernel.crashing.org> Cc: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-05[PATCH] ppc32: Add usb support to IBM stb04xxx platformsMatt Porter3-8/+61
Support ochi-ppc-soc.c on IBM stb04xxx platforms Signed-off-by: Dale Farnsworth <dale@farnsworth.org> Signed-off-by: Matt Porter <mporter@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-12 09:42:12 +0000