summaryrefslogtreecommitdiffstats
path: root/arch/powerpc
AgeCommit message (Collapse)AuthorFilesLines
2005-10-26[PATCH] powerpc: some prom.c cleanupsKumar Gala1-0/+4
On !CONFIG_PPC_MULTIPLATFORM _machine is defined as 0. This is ok, but we can't assign a value to _machine then. We may not have CONFIG_PCI available, so only build in support for find_parent_pci_resource(), request_OF_resource(), release_OF_resource() if PCI is enabled. This is probably not the long term fix but works out for now. Make reg_property64 contain 64-bit elements on a 32-bit machine. Mark the deprecated prom.c functions as __deprecated. Signed-off-by: Kumar K. Gala <kumar.gala@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-26[PATCH] powerpc: Make sure we have an RTC before trying to adjust itKumar Gala1-1/+1
Its valid for ppc_md.set_rtc_time to be NULL. We need to check that its non-NULL before trying to update the RTC. Signed-off-by: Kumar K. Gala <kumar.gala@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-24powerpc: Add a shutdown member to vio_driverStephen Rothwell1-0/+11
Add a shutdown member to struct vio_driver. We also need vio_bus_shutdown() which converts from struct device to struct vio_dev and knows how to extract the struct vio_driver. Original patch adjusted for different location of vio.c. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-10-24powerpc: iseries: Fix a bogus commentStephen Rothwell1-5/+1
A comment in lpevents.c refers to code that's actually in HvCallEvent.h. The code in HvCallEvent.h is pretty obvious, so just remove the comment altogether. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Acked-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-10-24powerpc: don't duplicate name between vio_driver and device_driverStephen Rothwell1-2/+1
Just set the name field directly in the device_driver structure contained in the vio_driver struct. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-10-24powerpc: Merge arch/ppc64/kernel/vio.c into arch/powerpc/kernel/vio.cStephen Rothwell2-0/+262
Merge arch/ppc64/kernel/vio.c into arch/powerpc/kernel/vio.c, update the Makefiles to make it work, and make ARCH=ppc64 still work. Michael's version put vio.c in arch/powerpc/sysedv but after consolting Paulus, this one puts it in arch/powerpc/kernel. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-10-23powerpc: Run on old powermacs.Paul Mackerras3-27/+106
Old powermacs have a number of differences from current machines: - there is no interrupt tree in the device tree, just interrupt or AAPL,interrupt properties - the chosen node in the device tree is called /chosen@0 - the OF claim method doesn't map the memory, so we have to do an explicit map call as well - there is no /chosen/cpu property on SMP machines - the NVRAM isn't structured as a set of partitions. This adapts the merged powermac support code to cope with these issues. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-23powerpc: Fix time code for 601 processorsPaul Mackerras1-23/+56
The 601 doesn't have the timebase register; instead it has an RTCL register that counts nanoseconds and wraps at 1000000000, and an RTCU register that counts seconds. This makes the necessary changes for the merged time code to use the RTCL/U registers when the kernel is running on a 601. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-22Merge changes from linux-2.6 by handPaul Mackerras4-11/+13
2005-10-22ppc64: Use arch/powerpc/platforms/powermac for powermac build.Paul Mackerras1-0/+4
This switches the ARCH=ppc64 build to use arch/powerpc/platforms/powermac instead of arch/ppc64/kernel/pmac*, and deletes the latter set of files. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-22powerpc: Merge in 64-bit powermac support.Paul Mackerras14-813/+1136
This brings in a lot of changes from arch/ppc64/kernel/pmac_*.c to arch/powerpc/platforms/powermac/*.c and makes various minor tweaks elsewhere. On the powermac we now initialize ppc_md by copying the whole pmac_md structure into it, which required some changes in the ordering of initializations of individual fields of it. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-22ppc64/powerpc: Fix time initialization on SMP systemsPaul Mackerras1-13/+1
This moves smp_space_timers from arch/ppc64/kernel/smp.c to arch/powerpc/kernel/time.c and makes it initialize last_jiffy[] instead of paca[].next_jiffy_update_tb, since last_jiffy[] is now what the time code uses. It also declares smp_space_timers in include/asm-powerpc/time.h and gets rid of an ifdef in div128_by_32. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-22ppc64: Fix delivery of RT signals to 32-bit processes.Paul Mackerras1-2/+1
An error in merging led to 32-bit processes getting the wrong link register value on entry to RT signal handlers, and the wrong stack chain as well. This fixes it. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-22powerpc: Move agp_special_page export to where it is definedPaul Mackerras2-4/+1
... instead of exporting it in arch/*/kernel/ppc_ksyms.c. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-21[PATCH] powerpc: Fix mmap returning 64 bit addressesMichael Ellerman1-1/+1
The merge of syscalls.c & sys_ppc32.c (30286ef6e044bc3d9019c3d8b900572e3fa05e65) broke mmap, if the mmap returned a 64 bit address. do_mmap2 was taking the return value from do_mmap_pgoff (an unsigned long), and storing it in an int, before returning it to sys_mmap as an unsigned long. So we were losing the high bits of the address. You would have thought the compiler could catch this for us ... Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-21[PATCH] powerpc: Don't blow away load_addr in start_threadMichael Ellerman1-1/+5
The patch to make process.c work for 32-bit and 64-bit (06d67d54741a5bfefa31945ef195dfa748c29025) broke some 64-bit binaries. We were blowing away load_addr in gpr[2], so we weren't properly relocating the entry point. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-21[PATCH] powerpc: Merge thread_info.hDavid Gibson4-18/+15
Merge ppc32 and ppc64 versions of thread_info.h. They were pretty similar already, the chief changes are: - Instead of inline asm to implement current_thread_info(), which needs to be different for ppc32 and ppc64, we use C with an asm("r1") register variable. gcc turns it into the same asm as we used to have for both platforms. - We replace ppc32's 'local_flags' with the ppc64 'syscall_noerror' field. The noerror flag was in fact the only thing in the local_flags field anyway, so the ppc64 approach is simpler, and means we only need a load-immediate/store instead of load/mask/store when clearing the flag. - In readiness for 64k pages, when THREAD_SIZE will be less than a page, ppc64 used kmalloc() rather than get_free_pages() to allocate the kernel stack. With this patch we do the same for ppc32, since there's no strong reason not to. - For ppc64, we no longer export THREAD_SHIFT and THREAD_SIZE via asm-offsets, thread_info.h can now be safely included in asm, as on ppc32. Built and booted on G4 Powerbook (ARCH=ppc and ARCH=powerpc) and Power5 (ARCH=ppc64 and ARCH=powerpc). Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-20powerpc: Fix some bugs in the new merged time codePaul Mackerras2-4/+3
I had the sense of the test for when to use the old 601-style RTC registers inverted. pmac_calibrate_decr and via_calibrate_decr weren't setting ppc_tb_freq, on which all the further calculations depended. Lastly, update_gtod was losing the top 32 bits of the new tb_to_xs value. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-20powerpc: Move some calculations from xxx_calibrate_decr to time_initPaul Mackerras1-15/+12
Previously the individual xxx_calibrate_decr functions would each print the timebase and cpu frequency and calculate several values such as tb_to_us and tb_to_xs. This moves those printks and calculations into time_init just after the call to the platform's calibrate_decr function. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-20ppc64: Move init_boot_text call and conswitchp init into setup_archPaul Mackerras2-4/+8
This way they get done in one place for all platforms, and it is more consistent with what ppc32 does. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-20ppc: rename pci_assign_all_busses to pci_assign_all_busesPaul Mackerras1-3/+3
... for consistency with ppc64 and to make merging easier. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-20powerpc: Fix places where ppc_md.show_[per]cpuinfo was treated as intPaul Mackerras3-58/+26
I missed a few places where ppc code was still assuming that the ppc_md.show_[per]cpuinfo functions returned int. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-20powerpc: Move smp_mpic_message_pass into mpic.cPaul Mackerras1-0/+21
Having it here rather than in arch/ppc64/kernel/smp.c means that we can use it on 32-bit SMP systems easily with ARCH=powerpc. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-20ppc64: Change ppc_md.get_cpuinfo to ppc_md.show_cpuinfoPaul Mackerras2-4/+4
... for consistency with ppc32; also add in ppc32's show_percpuinfo function. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-20[PATCH] powerpc: Merge ppc64 pmc.[ch] with ppc32 perfmon.[ch]David Gibson5-8/+115
This patches the ppc32 and ppc64 versions of the headers and .c files with helper functions for manipulating the performance counting hardware. As a side effect, it removes use of the term "perfmon" from ppc32, thus avoiding confusion with the unrelated performance counter interface from HP Labs also called "perfmon". Built, but not booted, for g5, pSeries, iSeries, and 32-bit Powermac with both ARCH=powerpc and ARCH=ppc{,64} as appropriate. Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-20[PATCH] powerpc: Some more fixes to allow building for a Book-E processorKumar Gala1-3/+2
Some minor fixes that are needed if we are building for a book-e processor. Signed-off-by: Kumar K. Gala <kumar.gala@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-20powerpc: Fix a corner case in __div64_32Paul Mackerras1-1/+2
The code was incorrectly doing a division by 0 in the case where the denominator was 0x100000000 and the divisor was 0xffffffff. Thanks to Fred Liu of Motorola for pointing this out. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-20powerpc: Fix a branch-too-far link error for 32-bit targetsPaul Mackerras1-1/+2
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-20powerpc: Merge time.c and asm/time.h.Paul Mackerras7-31/+1025
We now use the merged time.c for both 32-bit and 64-bit compilation with ARCH=powerpc, and for ARCH=ppc64, but not for ARCH=ppc32. This removes setup_default_decr (folds its function into time_init) and moves wakeup_decrementer into time.c. This also makes an asm-powerpc/rtc.h. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-20ppc64: Minor compilation fixesPaul Mackerras1-1/+1
This defines CONFIG_PPC_STD_MMU for ppc64, changes an instance of sys32_ to compat_sys_ in the ppc64 syscall table, and removes a reference to a non-existent arch/powerpc/xmon/Makefile. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-20powerpc: Move ptrace32.c from arch/ppc64 to arch/powerpcPaul Mackerras3-2/+452
Also corrected my email address in ptrace.c and updated the comments at the top of ptrace32.c. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-19powerpc: Eliminate a compile warning in signal_32.cPaul Mackerras1-2/+3
The second argument of get_sigset_t needed to have the const keyword. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-19powerpc: Merge machdep.hPaul Mackerras7-29/+42
A few things change for consistency between ppc32 and ppc64: idle functions return void; *_get_boot_time functions return unsigned long (i.e. time_t) rather than filling in a struct rtc_time (since that's useful to the callers and easier for pmac to generate); *_get_rtc_time and *_set_rtc_time functions take a struct rtc_time; irq_canonicalize is gone; nvram_sync returns void. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-19ppc: Minor smp changes for consistency with ppc64Paul Mackerras2-5/+4
This makes platform code use the smp_ops variable directly instead of ppc_md.smp_ops, removes the two unused `data' and `wait' arguments from the *_message_pass() functions, and removes the call to the never-implemented smp_ops->space_timers() function. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-18Merge rsync://oak/kernels/iseries/work/Paul Mackerras4-242/+128
2005-10-18powerpc: change sys32_ to compat_sys_Stephen Rothwell4-242/+128
This allows us to get rid of one type of entry in systbl.S. In passing we remove the duplicate compat_sys_getdents and compat_sys_utimes for which there are generic versions. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-10-18powerpc: Fix various compile errors with ARCH=ppc, ppc64 and powerpcPaul Mackerras6-15/+14
This makes ppc use the syscalls.c from arch/powerpc/kernel, exports copy_and_flush from head_32.S for use by prom_init.c (ARCH=powerpc), and consolidates the sys_fadvise64_64 implementations for 32-bit. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-18powerpc: merge ppc signal.c and ppc64 signal32.cStephen Rothwell2-1/+1270
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-10-17[PATCH] powerpc: Another maple merge tree fixDavid Gibson1-3/+1
With ARCH=powerpc, a spurious ifdef in prom_init prevented the seconday hold loop being correctly copied down on Maple. With this patch, Maple boots with ARCH=powerpc Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-17[PATCH] powerpc: Fix use of LOADBASE in merge treeDavid Gibson1-2/+2
The merge-tree version of LOADBASE actually loads the whole given address from the toc for ppc64. The matching OFF macro adjust for this, using an offset of 0 for ppc64, but we weren't using that in power4_idle. Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-17[PATCH] powerpc: replace use of _GLOBAL with .globlKumar Gala3-18/+33
The _GLOBAL() macro is for text symbols only. Changed to using .globl for .data symbols. Signed-off-by: Kumar K. Gala <kumar.gala@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-17powerpc: Make CONFIG_PROC_DEVICETREE independent of CONFIG_PPC_OFPaul Mackerras1-3/+3
... since all platforms will have a device tree. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-17powerpc: Clear the BSS at the start of early_init with ARCH=ppcPaul Mackerras1-0/+4
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-17powerpc: Merge syscalls.c and sys_ppc32.c.Paul Mackerras4-6/+1484
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-17powerpc: Initialize btext subsystem later, after prom_initPaul Mackerras4-106/+4
We were initializing the btext stuff from prom_init(), thus breaking the rule that all communication between prom_init() and the rest of the kernel has to be via the flattened device tree. This removes the btext initialization calls from prom_init() and initializes it instead after the device tree is unflattened. It would be nice to do it earlier, but that needs some more infrastructure to find the properties we need in the flattened device tree. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-17ppc32: use L1_CACHE_SHIFT/L1_CACHE_BYTESStephen Rothwell4-44/+44
instead of L1_CACHE_LINE_SIZE and LG_L1_CACHE_LINE_SIZE Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-10-14powerpc: move iSeries/HvCallPci.h to platforms/iseries/call_pci.hStephen Rothwell4-3/+293
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-10-14powerpc: move iSeries/HvCallHpt.h to platforms/iseries/call_hpt.hStephen Rothwell3-2/+104
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-10-14powerpc: eliminate DsaAddr from pci_dnStephen Rothwell4-16/+23
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-10-14powerpc: remove ISERIES_[SUB]BUS macrosStephen Rothwell3-17/+10
This allows us to simplify a couple of things. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-06 23:28:58 +0000