| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Commit 4f86a06e2d6e ("irqdomain: Make normal and nomap irqdomains
exclusive") introduced an IRQ_DOMAIN_FLAG_NO_MAP flag to isolate the
'nomap' domains still in use under the powerpc arch. With this new
flag, the revmap_tree of the IRQ domain is not used anymore. This
change broke the support of shared LSIs [1] in the XIVE driver because
it was relying on a lookup in the revmap_tree to query previously
mapped interrupts. Linux now creates two distinct IRQ mappings on the
same HW IRQ which can lead to unexpected behavior in the drivers.
The XIVE IRQ domain is not a direct mapping domain and its HW IRQ
interrupt number space is rather large : 1M/socket on POWER9 and
POWER10, change the XIVE driver to use a 'tree' domain type instead.
[1] For instance, a linux KVM guest with virtio-rng and virtio-balloon
devices.
Fixes: 4f86a06e2d6e ("irqdomain: Make normal and nomap irqdomains exclusive")
Cc: stable@vger.kernel.org # v5.14+
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Tested-by: Greg Kurz <groug@kaod.org>
Acked-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211116134022.420412-1-clg@kaod.org
|
|
When an interrupt is passed through, the KVM XIVE device calls the
set_vcpu_affinity() handler which raises the P bit to mask the
interrupt and to catch any in-flight interrupts while routing the
interrupt to the guest.
On the guest side, drivers (like some Intels) can request at probe
time some MSIs and call synchronize_irq() to check that there are no
in flight interrupts. This will call the XIVE get_irqchip_state()
handler which will always return true as the interrupt P bit has been
set on the host side and lock the CPU in an infinite loop.
Fix that by discarding disabled interrupts in get_irqchip_state().
Fixes: da15c03b047d ("powerpc/xive: Implement get_irqchip_state method for XIVE to fix shutdown race")
Cc: stable@vger.kernel.org #v5.4+
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Tested-by: seeteena <s1seetee@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211011070203.99726-1-clg@kaod.org
|
|
Merge our fixes branch into next.
That lets us resolve a conflict in arch/powerpc/sysdev/xive/common.c.
Between cbc06f051c52 ("powerpc/xive: Do not skip CPU-less nodes when
creating the IPIs"), which moved request_irq() out of xive_init_ipis(),
and 17df41fec5b8 ("powerpc: use IRQF_NO_DEBUG for IPIs") which added
IRQF_NO_DEBUG to that request_irq() call, which has now moved.
|
|
Compiling ppc64le_defconfig with clang-14 shows a modpost warning:
WARNING: modpost: vmlinux.o(.text+0xa74e0): Section mismatch in
reference from the function xive_setup_cpu_ipi() to the function
.init.text:xive_request_ipi()
The function xive_setup_cpu_ipi() references
the function __init xive_request_ipi().
This is often because xive_setup_cpu_ipi lacks a __init
annotation or the annotation of xive_request_ipi is wrong.
xive_request_ipi() is called from xive_setup_cpu_ipi(), which is not
__init, so xive_request_ipi() should not be marked __init. Remove the
attribute so there is no more warning.
Fixes: cbc06f051c52 ("powerpc/xive: Do not skip CPU-less nodes when creating the IPIs")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210816185711.21563-1-nathan@kernel.org
|
|
No functional change in this patch. arch_debugfs_dir is the generic kernel
name declared in linux/debugfs.h for arch-specific debugfs directory.
Architectures like x86/s390 already use the name. Rename powerpc
specific powerpc_debugfs_root to arch_debugfs_dir.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210812132831.233794-2-aneesh.kumar@linux.ibm.com
|
|
On PowerVM, CPU-less nodes can be populated with hot-plugged CPUs at
runtime. Today, the IPI is not created for such nodes, and hot-plugged
CPUs use a bogus IPI, which leads to soft lockups.
We can not directly allocate and request the IPI on demand because
bringup_up() is called under the IRQ sparse lock. The alternative is
to allocate the IPIs for all possible nodes at startup and to request
the mapping on demand when the first CPU of a node is brought up.
Fixes: 7dcc37b3eff9 ("powerpc/xive: Map one IPI interrupt per node")
Cc: stable@vger.kernel.org # v5.13
Reported-by: Geetika Moolchandani <Geetika.Moolchandani1@ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Tested-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Tested-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210807072057.184698-1-clg@kaod.org
|
|
On P10, the feature doing an automatic "save & restore" of a VCPU
interrupt context is set by default in OPAL. When a VP context is
pulled out, the state of the interrupt registers are saved by the XIVE
interrupt controller under the internal NVP structure representing the
VP. This saves a costly store/load in guest entries and exits.
If OPAL advertises the "save & restore" feature in the device tree,
it should also have set the 'H' bit in the CAM line. Check that when
vCPUs are connected to their ICP in KVM before going any further.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210720134209.256133-3-clg@kaod.org
|
|
There is no need to use the lockup detector ("noirqdebug") for IPIs.
The ipistorm benchmark measures a ~10% improvement on high systems
when this flag is set.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210719130614.195886-1-clg@kaod.org
|
|
The default domain of the PCI/MSIs is not the XIVE domain anymore. To
list the IRQ mappings under XMON and debugfs, query the IRQ data from
the low level XIVE domain.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210701132750.1475580-32-clg@kaod.org
|
|
The MSI domain clears the IRQ with msi_domain_free(), which calls
irq_domain_free_irqs_top(), which clears the handler data. This is a
problem for the XIVE controller since we need to unmap MMIO pages and
free a specific XIVE structure.
The 'msi_free()' handler is called before irq_domain_free_irqs_top()
when the handler data is still available. Use that to clear the XIVE
controller data.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210701132750.1475580-10-clg@kaod.org
|
|
In the early days of XIVE support, commit cffb717ceb8e ("powerpc/xive:
Ensure active irqd when setting affinity") tried to fix an issue
related to interrupt migration. If the root cause was related to CPU
unplug, it should have been fixed and there is no reason to keep the
irqd_is_started() check. This test is also breaking affinity setting
of MSIs which can set before starting the associated IRQ.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210701132750.1475580-8-clg@kaod.org
|
|
That was a workaround in the XIVE domain because of the lack of MSI
domain. This is now handled.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210701132750.1475580-7-clg@kaod.org
|
|
pr_debug() is easier to activate and it helps to know how the kernel
configures the HW when tweaking the IRQ subsystem.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210701132750.1475580-5-clg@kaod.org
|
|
This adds handlers to allocate/free IRQs in a domain hierarchy. We
could try to use xive_irq_domain_map() in xive_irq_domain_alloc() but
we rely on xive_irq_alloc_data() to set the IRQ handler data and
duplicating the code is simpler.
xive_irq_free_data() needs to be called when IRQ are freed to clear
the MMIO mappings and free the XIVE handler data, xive_irq_data
structure. This is going to be a problem with MSI domains which we
will address later.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210701132750.1475580-4-clg@kaod.org
|
|
This is a smatch warning:
arch/powerpc/sysdev/xive/common.c:1161 xive_request_ipi() warn: unsigned 'xid->irq' is never less than zero.
Fixes: fd6db2892eba ("powerpc/xive: Modernize XIVE-IPI domain with an 'alloc' handler")
Cc: stable@vger.kernel.org # v5.13
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210701152412.1507612-1-clg@kaod.org
|
|
Only a handful of old PPC systems are still using the old 'nomap'
variant of the irqdomain library. Move the associated definitions
behind a configuration option, which will allow us to make some
more radical changes.
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Merge misc updates from Andrew Morton:
"A few misc subsystems and some of MM.
175 patches.
Subsystems affected by this patch series: ia64, kbuild, scripts, sh,
ocfs2, kfifo, vfs, kernel/watchdog, and mm (slab-generic, slub,
kmemleak, debug, pagecache, msync, gup, memremap, memcg, pagemap,
mremap, dma, sparsemem, vmalloc, documentation, kasan, initialization,
pagealloc, and memory-failure)"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (175 commits)
mm/memory-failure: unnecessary amount of unmapping
mm/mmzone.h: fix existing kernel-doc comments and link them to core-api
mm: page_alloc: ignore init_on_free=1 for debug_pagealloc=1
net: page_pool: use alloc_pages_bulk in refill code path
net: page_pool: refactor dma_map into own function page_pool_dma_map
SUNRPC: refresh rq_pages using a bulk page allocator
SUNRPC: set rq_page_end differently
mm/page_alloc: inline __rmqueue_pcplist
mm/page_alloc: optimize code layout for __alloc_pages_bulk
mm/page_alloc: add an array-based interface to the bulk page allocator
mm/page_alloc: add a bulk page allocator
mm/page_alloc: rename alloced to allocated
mm/page_alloc: duplicate include linux/vmalloc.h
mm, page_alloc: avoid page_to_pfn() in move_freepages()
mm/Kconfig: remove default DISCONTIGMEM_MANUAL
mm: page_alloc: dump migrate-failed pages
mm/mempolicy: fix mpol_misplaced kernel-doc
mm/mempolicy: rewrite alloc_pages_vma documentation
mm/mempolicy: rewrite alloc_pages documentation
mm/mempolicy: rename alloc_pages_current to alloc_pages
...
|
|
iounmap will remove ptes.
Link: https://lkml.kernel.org/r/20210322021806.892164-4-npiggin@gmail.com
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Cédric Le Goater <clg@kaod.org>
Cc: Uladzislau Rezki <urezki@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The 'chip_id' field of the XIVE CPU structure is used to choose a
target for a source located on the same chip. For that, the XIVE
driver queries the chip identifier from the "ibm,chip-id" property
and compares it to a 'src_chip' field identifying the chip of a
source. This information is only available on the PowerNV platform,
'src_chip' being assigned to XIVE_INVALID_CHIP_ID under pSeries.
The "ibm,chip-id" property is also not available on all platforms. It
was first introduced on PowerNV and later, under QEMU for pSeries/KVM.
However, the property is not part of PAPR and does not exist under
pSeries/PowerVM.
Assign 'chip_id' to XIVE_INVALID_CHIP_ID by default and let the
PowerNV platform override the value with the "ibm,chip-id" property.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210413130352.1183267-1-clg@kaod.org
|
|
Instead of calling irq_create_mapping() to map the IPI for a node,
introduce an 'alloc' handler. This is usually an extension to support
hierarchy irq_domains which is not exactly the case for XIVE-IPI
domain. However, we can now use the irq_domain_alloc_irqs() routine
which allocates the IRQ descriptor on the specified node, even better
for cache performance on multi node machines.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210331144514.892250-10-clg@kaod.org
|
|
ipistorm [*] can be used to benchmark the raw interrupt rate of an
interrupt controller by measuring the number of IPIs a system can
sustain. When applied to the XIVE interrupt controller of POWER9 and
POWER10 systems, a significant drop of the interrupt rate can be
observed when crossing the second node boundary.
This is due to the fact that a single IPI interrupt is used for all
CPUs of the system. The structure is shared and the cache line updates
impact greatly the traffic between nodes and the overall IPI
performance.
As a workaround, the impact can be reduced by deactivating the IRQ
lockup detector ("noirqdebug") which does a lot of accounting in the
Linux IRQ descriptor structure and is responsible for most of the
performance penalty.
As a fix, this proposal allocates an IPI interrupt per node, to be
shared by all CPUs of that node. It solves the scaling issue, the IRQ
lockup detector still has an impact but the XIVE interrupt rate scales
linearly. It also improves the "noirqdebug" case as showed in the
tables below.
* P9 DD2.2 - 2s * 64 threads
"noirqdebug"
Mint/s Mint/s
chips cpus IPI/sys IPI/chip IPI/chip IPI/sys
--------------------------------------------------------------
1 0-15 4.984023 4.875405 4.996536 5.048892
0-31 10.879164 10.544040 10.757632 11.037859
0-47 15.345301 14.688764 14.926520 15.310053
0-63 17.064907 17.066812 17.613416 17.874511
2 0-79 11.768764 21.650749 22.689120 22.566508
0-95 10.616812 26.878789 28.434703 28.320324
0-111 10.151693 31.397803 31.771773 32.388122
0-127 9.948502 33.139336 34.875716 35.224548
* P10 DD1 - 4s (not homogeneous) 352 threads
"noirqdebug"
Mint/s Mint/s
chips cpus IPI/sys IPI/chip IPI/chip IPI/sys
--------------------------------------------------------------
1 0-15 2.409402 2.364108 2.383303 2.395091
0-31 6.028325 6.046075 6.089999 6.073750
0-47 8.655178 8.644531 8.712830 8.724702
0-63 11.629652 11.735953 12.088203 12.055979
0-79 14.392321 14.729959 14.986701 14.973073
0-95 12.604158 13.004034 17.528748 17.568095
2 0-111 9.767753 13.719831 19.968606 20.024218
0-127 6.744566 16.418854 22.898066 22.995110
0-143 6.005699 19.174421 25.425622 25.417541
0-159 5.649719 21.938836 27.952662 28.059603
0-175 5.441410 24.109484 31.133915 31.127996
3 0-191 5.318341 24.405322 33.999221 33.775354
0-207 5.191382 26.449769 36.050161 35.867307
0-223 5.102790 29.356943 39.544135 39.508169
0-239 5.035295 31.933051 42.135075 42.071975
0-255 4.969209 34.477367 44.655395 44.757074
4 0-271 4.907652 35.887016 47.080545 47.318537
0-287 4.839581 38.076137 50.464307 50.636219
0-303 4.786031 40.881319 53.478684 53.310759
0-319 4.743750 43.448424 56.388102 55.973969
0-335 4.709936 45.623532 59.400930 58.926857
0-351 4.681413 45.646151 62.035804 61.830057
[*] https://github.com/antonblanchard/ipistorm
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210331144514.892250-9-clg@kaod.org
|
|
When under xmon, the "dxi" command dumps the state of the XIVE
interrupts. If an interrupt number is specified, only the state of
the associated XIVE interrupt is dumped. This form of the command
lacks an irq_data parameter which is nevertheless used by
xmon_xive_get_irq_config(), leading to an xmon crash.
Fix that by doing a lookup in the system IRQ mapping to query the IRQ
descriptor data. Invalid interrupt numbers, or not belonging to the
XIVE IRQ domain, OPAL event interrupt number for instance, should be
caught by the previous query done at the firmware level.
Fixes: 97ef27507793 ("powerpc/xive: Fix xmon support on the PowerNV platform")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Tested-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210331144514.892250-8-clg@kaod.org
|
|
Move the xmon routine under XIVE subsystem and rework the loop on the
interrupts taking into account the xive_irq_domain to filter out IPIs.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210331144514.892250-7-clg@kaod.org
|
|
When looping on IRQ descriptor, irq_data is always valid.
Fixes: 930914b7d528 ("powerpc/xive: Add a debugfs file to dump internal XIVE state")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210331144514.892250-6-clg@kaod.org
|
|
Now that the IPI interrupt has its own domain, the checks on the HW
interrupt number XIVE_IPI_HW_IRQ and on the chip can be replaced by a
check on the domain.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210331144514.892250-5-clg@kaod.org
|
|
The IPI interrupt has its own domain now. Testing the HW interrupt
number is not needed anymore.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210331144514.892250-4-clg@kaod.org
|
|
The IPI interrupt is a special case of the XIVE IRQ domain. When
mapping and unmapping the interrupts in the Linux interrupt number
space, the HW interrupt number 0 (XIVE_IPI_HW_IRQ) is checked to
distinguish the IPI interrupt from other interrupts of the system.
Simplify the XIVE interrupt domain by introducing a specific domain
for the IPI.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210331144514.892250-3-clg@kaod.org
|
|
fixed the following coccicheck:
./arch/powerpc/sysdev/xive/spapr.c:552:8-9: WARNING: return of 0/1 in
function 'xive_spapr_match' with return type bool
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1615793096-83758-1-git-send-email-yang.lee@linux.alibaba.com
|
|
Introduce a vp_err() macro to standardize error reporting.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201210171450.1933725-13-clg@kaod.org
|
|
Previous patches removed the need of the first argument which was a
hack for Firwmware EOI. Remove it and flatten the routine which has
became simpler.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201210171450.1933725-12-clg@kaod.org
|
|
This flag was used to support the P9 DD1 and we have stopped
supporting this CPU when DD2 came out. See skiboot commit:
https://github.com/open-power/skiboot/commit/0b0d15e3c170
Also, remove eoi handler which is now unused.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201210171450.1933725-11-clg@kaod.org
|
|
This flag was used to support the PHB4 LSIs on P9 DD1 and we have
stopped supporting this CPU when DD2 came out. See skiboot commit:
https://github.com/open-power/skiboot/commit/0b0d15e3c170
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201210171450.1933725-10-clg@kaod.org
|
|
This flag was used to support the PHB4 LSIs on P9 DD1 and we have
stopped supporting this CPU when DD2 came out. See skiboot commit:
https://github.com/open-power/skiboot/commit/0b0d15e3c170
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201210171450.1933725-9-clg@kaod.org
|
|
Full state of the Linux interrupt descriptors can be dumped under
debugfs when compiled with CONFIG_GENERIC_IRQ_DEBUGFS. Add support for
the XIVE interrupt controller.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201210171450.1933725-7-clg@kaod.org
|
|
We hope one day to handle multiple irq_domain in the XIVE driver.
Start simple by setting the name using the DT node.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201210171450.1933725-6-clg@kaod.org
|
|
The XIVE driver deals with CPU IPIs in a peculiar way. Each CPU has
its own XIVE IPI interrupt allocated at the HW level, for PowerNV, or
at the hypervisor level for pSeries. In practice, these interrupts are
not always used. pSeries/PowerVM prefers local doorbells for local
threads since they are faster. On PowerNV, global doorbells are also
preferred for the same reason.
The mapping in the Linux is reduced to a single interrupt using HW
interrupt number 0 and a custom irq_chip to handle EOI. This can cause
performance issues in some benchmark (ipistorm) on multichip systems.
Clarify the use of the 0 value, it will help in improving multichip
support.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201210171450.1933725-4-clg@kaod.org
|
|
This is a simple cleanup to identify easily all flags of the XIVE
interrupt structure. The interrupts flagged with XIVE_IRQ_FLAG_NO_EOI
are the escalations used to wake up vCPUs in KVM. They are handled
very differently from the rest.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201210171450.1933725-3-clg@kaod.org
|
|
This fixes a compile error with W=1.
CC arch/powerpc/sysdev/xive/common.o
../arch/powerpc/sysdev/xive/common.c:1568:6: error: no previous prototype for ‘xive_debug_show_cpu’ [-Werror=missing-prototypes]
void xive_debug_show_cpu(struct seq_file *m, int cpu)
^~~~~~~~~~~~~~~~~~~
../arch/powerpc/sysdev/xive/common.c:1602:6: error: no previous prototype for ‘xive_debug_show_irq’ [-Werror=missing-prototypes]
void xive_debug_show_irq(struct seq_file *m, u32 hw_irq, struct irq_data *d)
^~~~~~~~~~~~~~~~~~~
Fixes: 930914b7d528 ("powerpc/xive: Add a debugfs file to dump internal XIVE state")
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200914211007.2285999-5-clg@kaod.org
|
|
Certain warnings are emitted for powerpc code when building with a gcc-10
toolset:
WARNING: modpost: vmlinux.o(.text.unlikely+0x377c): Section mismatch in
reference from the function remove_pmd_table() to the function
.meminit.text:split_kernel_mapping()
The function remove_pmd_table() references
the function __meminit split_kernel_mapping().
This is often because remove_pmd_table lacks a __meminit
annotation or the annotation of split_kernel_mapping is wrong.
Add the appropriate __init and __meminit annotations to make modpost not
complain. In all the cases there are just a single callsite from another
__init or __meminit function:
__meminit remove_pagetable() -> remove_pud_table() -> remove_pmd_table()
__init prom_init() -> setup_secure_guest()
__init xive_spapr_init() -> xive_spapr_disabled()
Signed-off-by: Vladis Dronov <vdronov@redhat.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200729133741.62789-1-vdronov@redhat.com
|
|
xive_native_provision_pages() allocates memory and passes the pointer to
OPAL so kmemleak cannot find the pointer usage in the kernel memory and
produces a false positive report (below) (even if the kernel did scan
OPAL memory, it is unable to deal with __pa() addresses anyway).
This silences the warning.
unreferenced object 0xc000200350c40000 (size 65536):
comm "qemu-system-ppc", pid 2725, jiffies 4294946414 (age 70776.530s)
hex dump (first 32 bytes):
02 00 00 00 50 00 00 00 00 00 00 00 00 00 00 00 ....P...........
01 00 08 07 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<0000000081ff046c>] xive_native_alloc_vp_block+0x120/0x250
[<00000000d555d524>] kvmppc_xive_compute_vp_id+0x248/0x350 [kvm]
[<00000000d69b9c9f>] kvmppc_xive_connect_vcpu+0xc0/0x520 [kvm]
[<000000006acbc81c>] kvm_arch_vcpu_ioctl+0x308/0x580 [kvm]
[<0000000089c69580>] kvm_vcpu_ioctl+0x19c/0xae0 [kvm]
[<00000000902ae91e>] ksys_ioctl+0x184/0x1b0
[<00000000f3e68bd7>] sys_ioctl+0x48/0xb0
[<0000000001b2c127>] system_call_exception+0x124/0x1f0
[<00000000d2b2ee40>] system_call_common+0xe8/0x214
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200612043303.84894-1-aik@ozlabs.ru
|
|
XIVE interrupt controller uses an Event Queue (EQ) to enqueue event
notifications when an exception occurs. The EQ is a single memory page
provided by the O/S defining a circular buffer, one per server and
priority couple.
On baremetal, the EQ page is configured with an OPAL call. On pseries,
an extra hop is necessary and the guest OS uses the hcall
H_INT_SET_QUEUE_CONFIG to configure the XIVE interrupt controller.
The XIVE controller being Hypervisor privileged, it will not be allowed
to enqueue event notifications for a Secure VM unless the EQ pages are
shared by the Secure VM.
Hypervisor/Ultravisor still requires support for the TIMA and ESB page
fault handlers. Until this is complete, QEMU can use the emulated XIVE
device for Secure VMs, option "kernel_irqchip=off" on the QEMU pseries
machine.
Signed-off-by: Ram Pai <linuxram@us.ibm.com>
Reviewed-by: Cedric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200426020518.GC5853@oc0525413822.ibm.com
|
|
The XIVE interrupt mode can be disabled with the "xive=off" kernel
parameter, in which case there is nothing to present to the user in the
associated /sys/kernel/debug/powerpc/xive file.
Fixes: 930914b7d528 ("powerpc/xive: Add a debugfs file to dump internal XIVE state")
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200429075122.1216388-4-clg@kaod.org
|
|
Commit 1ca3dec2b2df ("powerpc/xive: Prevent page fault issues in the
machine crash handler") fixed an issue in the FW assisted dump of
machines using hash MMU and the XIVE interrupt mode under the POWER
hypervisor. It forced the mapping of the ESB page of interrupts being
mapped in the Linux IRQ number space to make sure the 'crash kexec'
sequence worked during such an event. But it didn't handle the
un-mapping.
This mapping is now blocking the removal of a passthrough IO adapter
under the POWER hypervisor because it expects the guest OS to have
cleared all page table entries related to the adapter. If some are
still present, the RTAS call which isolates the PCI slot returns error
9001 "valid outstanding translations".
Remove these mapping in the IRQ data cleanup routine.
Under KVM, this cleanup is not required because the ESB pages for the
adapter interrupts are un-mapped from the guest by the hypervisor in
the KVM XIVE native device. This is now redundant but it's harmless.
Fixes: 1ca3dec2b2df ("powerpc/xive: Prevent page fault issues in the machine crash handler")
Cc: stable@vger.kernel.org # v5.5+
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200429075122.1216388-2-clg@kaod.org
|
|
Merge our topic branch shared with the kvm-ppc tree.
This brings in one commit that touches the XIVE interrupt controller
logic across core and KVM code.
|
|
When an interrupt has been handled, the OS notifies the interrupt
controller with a EOI sequence. On a POWER9 system using the XIVE
interrupt controller, this can be done with a load or a store
operation on the ESB interrupt management page of the interrupt. The
StoreEOI operation has less latency and improves interrupt handling
performance but it was deactivated during the POWER9 DD2.0 timeframe
because of ordering issues. We use the LoadEOI today but we plan to
reactivate StoreEOI in future architectures.
There is usually no need to enforce ordering between ESB load and
store operations as they should lead to the same result. E.g. a store
trigger and a load EOI can be executed in any order. Assuming the
interrupt state is PQ=10, a store trigger followed by a load EOI will
return a Q bit. In the reverse order, it will create a new interrupt
trigger from HW. In both cases, the handler processing interrupts is
notified.
In some cases, the XIVE_ESB_SET_PQ_10 load operation is used to
disable temporarily the interrupt source (mask/unmask). When the
source is reenabled, the OS can detect if interrupts were received
while the source was disabled and reinject them. This process needs
special care when StoreEOI is activated. The ESB load and store
operations should be correctly ordered because a XIVE_ESB_STORE_EOI
operation could leave the source enabled if it has not completed
before the loads.
For those cases, we enforce Load-after-Store ordering with a special
load operation offset. To avoid performance impact, this ordering is
only enforced when really needed, that is when interrupt sources are
temporarily disabled with the XIVE_ESB_SET_PQ_10 load. It should not
be needed for other loads.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200220081506.31209-1-clg@kaod.org
|
|
This function allocates IRQ on a specific chip. VAS needs per chip
IRQ allocation and will have IRQ handler per VAS instance.
Signed-off-by: Haren Myneni <haren@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1587016720.2275.1047.camel@hbabu-laptop
|
|
As does XMON, the debugfs file /sys/kernel/debug/powerpc/xive exposes
the XIVE internal state of the machine CPUs and interrupts. Available
on the PowerNV and sPAPR platforms.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
[mpe: Make the debugfs file 0400]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200306150143.5551-5-clg@kaod.org
|
|
Some firmwares or hypervisors can advertise different source
characteristics. Track their value under XMON. What we are mostly
interested in is the StoreEOI flag.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200306150143.5551-4-clg@kaod.org
|
|
The PowerNV platform has multiple IRQ chips and the xmon command
dumping the state of the XIVE interrupt should only operate on the
XIVE IRQ chip.
Fixes: 5896163f7f91 ("powerpc/xmon: Improve output of XIVE interrupts")
Cc: stable@vger.kernel.org # v5.4+
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200306150143.5551-3-clg@kaod.org
|
|
When a CPU is brought up, an IPI number is allocated and recorded
under the XIVE CPU structure. Invalid IPI numbers are tracked with
interrupt number 0x0.
On the PowerNV platform, the interrupt number space starts at 0x10 and
this works fine. However, on the sPAPR platform, it is possible to
allocate the interrupt number 0x0 and this raises an issue when CPU 0
is unplugged. The XIVE spapr driver tracks allocated interrupt numbers
in a bitmask and it is not correctly updated when interrupt number 0x0
is freed. It stays allocated and it is then impossible to reallocate.
Fix by using the XIVE_BAD_IRQ value instead of zero on both platforms.
Reported-by: David Gibson <david@gibson.dropbear.id.au>
Fixes: eac1e731b59e ("powerpc/xive: guest exploitation of the XIVE interrupt controller")
Cc: stable@vger.kernel.org # v4.14+
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Tested-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200306150143.5551-2-clg@kaod.org
|
