summaryrefslogtreecommitdiffstats
path: root/arch/powerpc/sysdev/cpm2.c
AgeCommit message (Collapse)AuthorFilesLines
2018-01-20powerpc/sysdev: change CPM GPIO to platform_deviceChristophe Leroy1-11/+0
Since commit 9427ecbed46cc ("gpio: Rework of_gpiochip_set_names() to use device property accessors"), gpio chips have to have a parent, otherwise devprop_gpiochip_set_names() prematurely exists with message "GPIO chip parent is NULL" and doesn't proceed 'gpio-line-names' DT property. This patch wraps the CPM GPIO into a platform driver to allow assignment of the parent device. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Scott Wood <oss@buserror.net>
2016-09-25soc/fsl/qe: fix Oops on CPM1 (and likely CPM2)Christophe Leroy1-4/+0
Commit 0e6e01ff694ee ("CPM/QE: use genalloc to manage CPM/QE muram") has changed the way muram is managed. genalloc uses kmalloc(), hence requires the SLAB to be up and running. On powerpc 8xx, cpm_reset() is called early during startup. cpm_reset() then calls cpm_muram_init() before SLAB is available, hence the following Oops. cpm_reset() cannot be called during initcalls because the CPM is needed for console. This patch removes the call to cpm_muram_init() from cpm_reset(). cpm_muram_init() will be called from a new function called cpm_init() which is declared as subsys_initcall, unless cpm_muram_alloc() is called earlier for the serial console in which case cpm_muram_init() will be called from there. The reason for calling it from two places is that some drivers (e.g. i2c-cpm) need some of the initialisations done by cpm_muram_init() but don't call cpm_muram_alloc(). The console driver calls cpm_muram_alloc() but some platforms might not use the CPM serial ports for console. [ 0.000000] Unable to handle kernel paging request for data at address 0x00000008 [ 0.000000] Faulting instruction address: 0xc01acce0 [ 0.000000] Oops: Kernel access of bad area, sig: 11 [#1] [ 0.000000] PREEMPT CMPC885 [ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 4.4.14-g0886ed8 #5 [ 0.000000] task: c05183e0 ti: c0536000 task.ti: c0536000 [ 0.000000] NIP: c01acce0 LR: c0011068 CTR: 00000000 [ 0.000000] REGS: c0537e50 TRAP: 0300 Not tainted (4.4.14-s3k-dev-g0886ed8-svn) [ 0.000000] MSR: 00001032 <ME,IR,DR,RI> CR: 28044428 XER: 00000000 [ 0.000000] DAR: 00000008 DSISR: c0000000 GPR00: c0011068 c0537f00 c05183e0 00000000 00009000 ffffffff 00000bc0 ffffffff GPR08: ff003000 ff00b000 ff003bbf 00000000 22044422 100d43a8 00000000 07ff94e8 GPR16: 00000000 07bb5d70 00000000 07ff81f4 07ff81f4 07ff81f4 00000000 00000000 GPR24: 07ffb3a0 07fe7628 c0550000 c7ffa190 c0540000 ff003bbf 00000000 00000001 [ 0.000000] NIP [c01acce0] gen_pool_add_virt+0x14/0xdc [ 0.000000] LR [c0011068] cpm_muram_init+0xd4/0x18c [ 0.000000] Call Trace: [ 0.000000] [c0537f00] [00000200] 0x200 (unreliable) [ 0.000000] [c0537f20] [c0011068] cpm_muram_init+0xd4/0x18c [ 0.000000] [c0537f70] [c0494684] cpm_reset+0xb4/0xc8 [ 0.000000] [c0537f90] [c0494c64] cmpc885_setup_arch+0x10/0x30 [ 0.000000] [c0537fa0] [c0493cd4] setup_arch+0x130/0x168 [ 0.000000] [c0537fb0] [c04906bc] start_kernel+0x88/0x380 [ 0.000000] [c0537ff0] [c0002224] start_here+0x38/0x98 [ 0.000000] Instruction dump: [ 0.000000] 91430010 91430014 80010014 83e1000c 7c0803a6 38210010 4e800020 7c0802a6 [ 0.000000] 9421ffe0 bf61000c 90010024 7c7e1b78 <80630008> 7c9c2378 7cc31c30 3863001f [ 0.000000] ---[ end trace dc8fa200cb88537f ]--- fixes: 0e6e01ff694ee ("CPM/QE: use genalloc to manage CPM/QE muram") Cc: stable@vger.linux.org Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> [scottwood: Removed some string changes unrelated to bugfix] Signed-off-by: Scott Wood <oss@buserror.net>
2010-04-19powerpc/fsl-cpm: Configure clock correctly for SCCWolfgang Ocker1-3/+8
Some board setup functions call cpm1_clk_setup() or cmp2_clk_setup() to configure the clock source. If CPM_CLK_RTX has been used for the parameter mode, the clock has been configured only for TX but not for RX. With this patch CPM_CLK_RTX configures the clock for both directions correctly. Signed-off-by: Wolfgang Ocker <weo@reccoware.de> Acked-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-05-19powerpc/cpm: Remove some cruft code and definesKumar Gala1-1/+1
Kill of some old defines and macros that we no longer use like CPM_MAP_ADDR and CPM_IRQ_OFFSET. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-19powerpc/cpm2: fix building fs_enet driver as a module.Grant Likely1-0/+1
Building the fs_enet driver as a modules fails because it cannot access the global cpm2_immr symbol. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-01-28cpm2: Round the baud-rate clock divider to the nearest integer.Laurent Pinchart1-1/+2
Instead of rounding the divider down, improve the baud-rate generators accuracy by rounding to the nearest integer. Signed-off-by: Laurent Pinchart <laurentp@cse-semaphore.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-07-28cpm2: Rework baud rate generators configuration to support external clocks.Laurent Pinchart1-30/+4
The CPM2 BRG setup functions cpm_setbrg and cpm2_fastbrg don't support external clocks. This patch adds a new exported __cpm2_setbrg function that takes the clock rate and clock source as extra parameters, and moves cpm_setbrg and cpm2_fastbrg to include/asm-powerpc/cpm2.h where they become inline wrappers around __cpm2_setbrg. Signed-off-by: Laurent Pinchart <laurentp@cse-semaphore.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-07-28cpm2: Implement GPIO LIB API on CPM2 Freescale SoC.Laurent Pinchart1-0/+11
This patch implement GPIO LIB support for the CPM2 GPIOs. The code can also be used for CPM1 GPIO port E, as both cores are compatible at the register level. Based on earlier work by Laurent Pinchart. Signed-off-by: Jochen Friedrich <jochen@scram.de> Cc: Laurent Pinchart <laurentp@cse-semaphore.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-04-17[POWERPC] CPM: Always use new binding.Scott Wood1-97/+0
The kconfig entry can go away once arch/ppc and references to the config in drivers are removed. Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-04-17[POWERPC] CPM2: Reset the CPM when early debugging is not enabled.Laurent Pinchart1-0/+6
Similarly to what is done for PQ1-based platforms, this patch resets the PQ2 Communication Processor Module in cpm2_reset() when early debugging is not enabled. This helps avoiding conflicts when the boot loader configured the CPM in an unexpected way. Signed-off-by: Laurent Pinchart <laurentp@cse-semaphore.com> Acked-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-04-14Merge branch 'linux-2.6'Paul Mackerras1-0/+1
2008-04-03[POWERPC] Fix CPM2 SCC1 clock initialization.Laurent Pinchart1-0/+1
A missing break statement in a switch caused cpm2_clk_setup() to initialize SCC2 instead of SCC1. Signed-off-by: Laurent Pinchart <laurentp@cse-semaphore.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-04-01[POWERPC] Replace remaining __FUNCTION__ occurrencesHarvey Harrison1-1/+1
__FUNCTION__ is gcc-specific, use __func__ Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-01-28[POWERPC] CPM: Rename commproc to cpm1 and cpm2_common.c to cpm2.cJochen Friedrich1-0/+469
Rename commproc.[ch] to cpm1.[ch] to be more consistent with cpm2. Also rename cpm2_common.c to cpm2.c as suggested by Scott Wood. Adjust the includes accordingly. Signed-off-by: Jochen Friedrich <jochen@scram.de> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-01 13:40:58 +0000