summaryrefslogtreecommitdiffstats
path: root/arch/powerpc/platforms
AgeCommit message (Collapse)AuthorFilesLines
2011-02-07powerpc: Fix hcall tracepoint recursionAnton Blanchard1-0/+37
Spinlocks on shared processor partitions use H_YIELD to notify the hypervisor we are waiting on another virtual CPU. Unfortunately this means the hcall tracepoints can recurse. The patch below adds a percpu depth and checks it on both the entry and exit hcall tracepoints. Signed-off-by: Anton Blanchard <anton@samba.org> Acked-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> CC: stable@kernel.org
2011-01-21Merge branch 'devicetree/merge' of git://git.secretlab.ca/git/linux-2.6Linus Torvalds2-4/+4
* 'devicetree/merge' of git://git.secretlab.ca/git/linux-2.6: powerpc/83xx: fix build failures on dt compatible list.
2011-01-21Merge branch 'merge' of ↵Linus Torvalds10-112/+167
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (34 commits) powerpc/mpic: Fix mask/unmask timeout message powerpc/pseries: Add BNX2=m to defconfig powerpc: Enable 64kB pages and 1024 threads in pseries config powerpc: Disable mcount tracers in pseries defconfig powerpc/boot/dts: Install dts from the right directory powerpc: machine_check_generic is wrong on 64bit powerpc: Check RTAS extended log flag before checking length powerpc: Fix corruption when grabbing FWNMI data powerpc: Rework pseries machine check handler powerpc: Don't silently handle machine checks from userspace powerpc: Remove duplicate debugger hook in machine_check_exception powerpc: Never halt RTAS error logging after receiving an unrecoverable machine check powerpc: Don't force MSR_RI in machine_check_exception powerpc: Print 32 bits of DSISR in show_regs powerpc/kdump: Disable ftrace during kexec powerpc/kdump: Move crash_kexec_stop_spus to kdump crash handler powerpc/kexec: Remove empty ppc_md.machine_kexec_prepare powerpc/kexec: Don't initialise kexec hooks to default handlers powerpc/kdump: Remove ppc_md.machine_crash_shutdown powerpc/kexec: Remove ppc_md.machine_kexec ...
2011-01-21powerpc: Fix corruption when grabbing FWNMI dataAnton Blanchard1-14/+38
The FWNMI code uses a global buffer without any locks to read the RTAS error information. If two CPUs take a machine check at once then we will corrupt this buffer. Since most FWNMI rtas messages are not of the extended type, we can create a 64bit percpu buffer and use it where possible. If we do receive an extended RTAS log then we fall back to the old behaviour of using the global buffer. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-01-21powerpc: Rework pseries machine check handlerAnton Blanchard1-18/+30
Rework pseries machine check handler: - If MSR_RI isn't set, we cannot recover even if the machine check was fully recovered - Rename nonfatal to recovered - Handle RTAS_DISP_LIMITED_RECOVERY - Use BUS_MCEERR_AR instead of BUS_ADRERR - Don't check all the RTAS error log fields when receiving a synchronous machine check. Recent versions of the pseries firmware do not fill them in during a machine check and instead send a follow up error log with the detailed information. If we see a synchronous machine check, and we came from userspace then kill the task. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-01-21powerpc: Never halt RTAS error logging after receiving an unrecoverable ↵Anton Blanchard1-1/+1
machine check Newer versions of the System p firwmare send a partial RTAS error log in the machine check handler with a more detailed response appearing sometime later via check event. This means at machine check time we do not have enough information to ascertain exactly what went on. Furthermore, I have found the RTAS error logs in the machine check handler contain no useful information, so halting on them makes little sense. If we want to halt it would make more sense to do it following the error log received sometime later via check event. In light of this, never halt the error log in the pseries machine check handler. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-01-21powerpc/kdump: Move crash_kexec_stop_spus to kdump crash handlerAnton Blanchard1-0/+70
Use the crash handler hooks to run the SPU stop code, just like we do for ehea and cell RAS code. While I'm here I noticed "CPUSs reliabally" so fix the spelling MISTAKESs reliabally. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-01-21powerpc/kexec: Remove empty ppc_md.machine_kexec_prepareAnton Blanchard2-22/+0
We check for a valid handler before calling ppc_md.machine_kexec_prepare so we can just remove these empty handlers. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-01-21powerpc/kexec: Don't initialise kexec hooks to default handlersAnton Blanchard2-13/+0
There's no need to initialise ppc_md.machine_kexec and ppc_md.machine_kexec_prepare to the default handlers. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-01-21powerpc/kdump: Remove ppc_md.machine_crash_shutdownAnton Blanchard2-2/+0
No one uses ppc_md.machine_crash_shutdown, so remove it. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-01-21powerpc/cell: Use system_wq in cpufreq_spudemandTejun Heo1-17/+3
With cmwq, there's no reason to use a separate workqueue in cpufreq_spudemand. Use system_wq instead. The work items are already sync canceled on stop, so it's already guaranteed that no work is running when spu_gov_exit() is entered. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: linuxppc-dev@lists.ozlabs.org Cc: Dave Jones <davej@redhat.com> Cc: cpufreq@vger.kernel.org Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-01-21powerpc/spufs: Use simple_write_to_bufferAkinobu Mita1-20/+7
Simplify several write fileoperations for spufs by using simple_write_to_buffer(). Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-01-20kconfig: rename CONFIG_EMBEDDED to CONFIG_EXPERTDavid Rientjes2-4/+4
The meaning of CONFIG_EMBEDDED has long since been obsoleted; the option is used to configure any non-standard kernel with a much larger scope than only small devices. This patch renames the option to CONFIG_EXPERT in init/Kconfig and fixes references to the option throughout the kernel. A new CONFIG_EMBEDDED option is added that automatically selects CONFIG_EXPERT when enabled and can be used in the future to isolate options that should only be considered for embedded systems (RISC architectures, SLOB, etc). Calling the option "EXPERT" more accurately represents its intention: only expert users who understand the impact of the configuration changes they are making should enable it. Reviewed-by: Ingo Molnar <mingo@elte.hu> Acked-by: David Woodhouse <david.woodhouse@intel.com> Signed-off-by: David Rientjes <rientjes@google.com> Cc: Greg KH <gregkh@suse.de> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jens Axboe <axboe@kernel.dk> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Robin Holt <holt@sgi.com> Cc: <linux-arch@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-21Merge remote branch 'kumar/next' into mergeBenjamin Herrenschmidt2-5/+18
2011-01-19powerpc/83xx: fix build failures on dt compatible list.Grant Likely2-4/+4
Commit a4f740cf, "of/flattree: Add of_flat_dt_match() helper function" introduced build failures in arch/powerpc/platform/83xx by mistyping 'static' as 'struct' in the compatible string list, and omitting a few semicolons. This patch fixes it. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-01-13Merge branch 'for-next' of ↵Linus Torvalds9-12/+12
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (43 commits) Documentation/trace/events.txt: Remove obsolete sched_signal_send. writeback: fix global_dirty_limits comment runtime -> real-time ppc: fix comment typo singal -> signal drivers: fix comment typo diable -> disable. m68k: fix comment typo diable -> disable. wireless: comment typo fix diable -> disable. media: comment typo fix diable -> disable. remove doc for obsolete dynamic-printk kernel-parameter remove extraneous 'is' from Documentation/iostats.txt Fix spelling milisec -> ms in snd_ps3 module parameter description Fix spelling mistakes in comments Revert conflicting V4L changes i7core_edac: fix typos in comments mm/rmap.c: fix comment sound, ca0106: Fix assignment to 'channel'. hrtimer: fix a typo in comment init/Kconfig: fix typo anon_inodes: fix wrong function name in comment fix comment typos concerning "consistent" poll: fix a typo in comment ... Fix up trivial conflicts in: - drivers/net/wireless/iwlwifi/iwl-core.c (moved to iwl-legacy.c) - fs/ext4/ext4.h Also fix missed 'diabled' typo in drivers/net/bnx2x/bnx2x.h while at it.
2011-01-12powerpc/mpc8308: fix USB DR controller initializationIlya Yanok2-5/+18
MPC8308 has ULPI pin muxing settings in SICRH register, bits 17-18 which is different from both MPC8313 and MPC8315. Also MPC8308 doesn't have REFSEL, UTMI_PHY_EN and OTG_PORT fields in the USB DR controller CONTROL register. Signed-off-by: Ilya Yanok <yanok@emcraft.com> Tested-by: Wolfgang Denk <wd@denx.de> Acked-by: Wolfgang Denk <wd@denx.de> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-01-11Merge branch 'next' of ↵Linus Torvalds16-116/+601
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (72 commits) powerpc/pseries: Fix build of topology stuff without CONFIG_NUMA powerpc/pseries: Fix VPHN build errors on non-SMP systems powerpc/83xx: add mpc8308_p1m DMA controller device-tree node powerpc/83xx: add DMA controller to mpc8308 device-tree node powerpc/512x: try to free dma descriptors in case of allocation failure powerpc/512x: add MPC8308 dma support powerpc/512x: fix the hanged dma transfer issue powerpc/512x: scatter/gather dma fix powerpc/powermac: Make auto-loading of therm_pm72 possible of/address: Use propper endianess in get_flags powerpc/pci: Use printf extension %pR for struct resource powerpc: Remove unnecessary casts of void ptr powerpc: Disable VPHN polling during a suspend operation powerpc/pseries: Poll VPA for topology changes and update NUMA maps powerpc: iommu: Add device name to iommu error printks powerpc: Record vma->phys_addr in ioremap() powerpc: Update compat_arch_ptrace powerpc: Fix PPC_PTRACE_SETHWDEBUG on PPC_BOOK3S powerpc/time: printk time stamp init not correct powerpc: Minor cleanups for machdep.h ...
2011-01-11Merge remote branch 'gcl/next' into nextBenjamin Herrenschmidt2-3/+5
2011-01-10Merge branch 'next-devicetree' of git://git.secretlab.ca/git/linux-2.6Linus Torvalds9-76/+51
* 'next-devicetree' of git://git.secretlab.ca/git/linux-2.6: (29 commits) of/flattree: forward declare struct device_node in of_fdt.h ipmi: explicitly include of_address.h and of_irq.h sparc: explicitly cast negative phandle checks to s32 powerpc/405: Fix missing #{address,size}-cells in i2c node powerpc/5200: dts: refactor dts files powerpc/5200: dts: Change combatible strings on localbus powerpc/5200: dts: remove unused properties powerpc/5200: dts: rename nodes to prepare for refactoring dts files of/flattree: Update dtc to current mainline. of/device: Don't register disabled devices powerpc/dts: fix syntax bugs in bluestone.dts of: Fixes for OF probing on little endian systems of: make drivers depend on CONFIG_OF instead of CONFIG_PPC_OF of/flattree: Add of_flat_dt_match() helper function of_serial: explicitly include of_irq.h of/flattree: Refactor unflatten_device_tree and add fdt_unflatten_tree of/flattree: Reorder unflatten_dt_node of/flattree: Refactor unflatten_dt_node of/flattree: Add non-boottime device tree functions of/flattree: Add Kconfig for EARLY_FLATTREE ... Fix up trivial conflict in arch/sparc/prom/tree_32.c as per Grant.
2011-01-10headers: kobject.h reduxAlexey Dobriyan1-1/+0
Remove kobject.h from files which don't need it, notably, sched.h and fs.h. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-07fs: icache RCU free inodesNick Piggin1-2/+8
RCU free the struct inode. This will allow: - Subsequent store-free path walking patch. The inode must be consulted for permissions when walking, so an RCU inode reference is a must. - sb_inode_list_lock to be moved inside i_lock because sb list walkers who want to take i_lock no longer need to take sb_inode_list_lock to walk the list in the first place. This will simplify and optimize locking. - Could remove some nested trylock loops in dcache code - Could potentially simplify things a bit in VM land. Do not need to take the page lock to follow page->mapping. The downsides of this is the performance cost of using RCU. In a simple creat/unlink microbenchmark, performance drops by about 10% due to inability to reuse cache-hot slab objects. As iterations increase and RCU freeing starts kicking over, this increases to about 20%. In cases where inode lifetimes are longer (ie. many inodes may be allocated during the average life span of a single inode), a lot of this cache reuse is not applicable, so the regression caused by this patch is smaller. The cache-hot regression could largely be avoided by using SLAB_DESTROY_BY_RCU, however this adds some complexity to list walking and store-free path walking, so I prefer to implement this at a later date, if it is shown to be a win in real situations. I haven't found a regression in any non-micro benchmark so I doubt it will be a problem. Signed-off-by: Nick Piggin <npiggin@kernel.dk>
2011-01-07fs: dcache rationalise dget variantsNick Piggin1-1/+1
dget_locked was a shortcut to avoid the lazy lru manipulation when we already held dcache_lock (lru manipulation was relatively cheap at that point). However, how that the lru lock is an innermost one, we never hold it at any caller, so the lock cost can now be avoided. We already have well working lazy dcache LRU, so it should be fine to defer LRU manipulations to scan time. Signed-off-by: Nick Piggin <npiggin@kernel.dk>
2011-01-07fs: dcache remove dcache_lockNick Piggin1-4/+1
dcache_lock no longer protects anything. remove it. Signed-off-by: Nick Piggin <npiggin@kernel.dk>
2011-01-07fs: dcache scale d_unhashedNick Piggin1-0/+3
Protect d_unhashed(dentry) condition with d_lock. This means keeping DCACHE_UNHASHED bit in synch with hash manipulations. Signed-off-by: Nick Piggin <npiggin@kernel.dk>
2011-01-07fs: dcache scale dentry refcountNick Piggin1-1/+1
Make d_count non-atomic and protect it with d_lock. This allows us to ensure a 0 refcount dentry remains 0 without dcache_lock. It is also fairly natural when we start protecting many other dentry members with d_lock. Signed-off-by: Nick Piggin <npiggin@kernel.dk>
2011-01-03ppc: fix comment typo singal -> signalJustin P. Mattock1-1/+1
The patches below fixes a typo "singal" to "signal". Signed-off-by: Justin P. Mattock <justinmattock@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-01-01of/flattree: Add of_flat_dt_match() helper functionGrant Likely9-76/+51
This patch adds of_flat_dt_match() which tests a node for compatibility with a list of values and converts the relevant powerpc platform code to use it. This approach simplifies the board support code a bit. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Reviewed-by: Stephen Neuendorffer <stephen.neuendorffer@xilinx.com>
2010-12-29Merge v2.6.37-rc8 into powerpc/nextGrant Likely51-168/+1239
2010-12-23powerpc/mpc5200: include fs.h in mpc52xx_gpt.cWolfram Sang1-0/+1
Fix build errors like these (from a randconfig and my defconfig for a custom board): src/arch/powerpc/platforms/52xx/mpc52xx_gpt.c:549: error: dereferencing pointer to incomplete type: 1 errors in 1 logs src/arch/powerpc/platforms/52xx/mpc52xx_gpt.c:636: error: implicit declaration of function 'nonseekable_open': 1 errors in 1 logs src/arch/powerpc/platforms/52xx/mpc52xx_gpt.c:657: error: variable 'mpc52xx_wdt_fops' has initializer but incomplete type: 1 errors in 1 logs src/arch/powerpc/platforms/52xx/mpc52xx_gpt.c:658: error: excess elements in struct initializer: 1 errors in 1 logs src/arch/powerpc/platforms/52xx/mpc52xx_gpt.c:658: error: unknown field 'owner' specified in initializer: 1 errors in 1 logs ... Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-12-22Merge branch 'master' into for-nextJiri Kosina3-4/+6
Conflicts: MAINTAINERS arch/arm/mach-omap2/pm24xx.c drivers/scsi/bfa/bfa_fcpim.c Needed to update to apply fixes for which the old branch was too outdated.
2010-12-09powerpc/powermac: Make auto-loading of therm_pm72 possibleMarc Zyngier1-0/+9
The therm_pm72 driver, used on the PowerMac G5 range, cannot be auto-loaded, since the driver itself creates both the device node and the driver instance. Moving the device node creation to the platform setup code and adding the necessary MODULE_DEVICE_TABLE() information allows the driver to be automatically loaded by udev on any semi-modern distribution. It "fixes" a major source of problem on G5 machines where the driver wasn't explicitely loaded by default, and the system would automatically shutdown under load. Tested on an Xserve G5. Signed-off-by: Marc Zyngier <maz@misterjones.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-12-09powerpc/pseries: Pass phb only to iommu_table_setparms_lparBenjamin Herrenschmidt1-7/+4
iommu_table_setparms_lpar needs either the phb or the subbusnumber (not both), pass the phb to make it similar to iommu_table_setparms. Note: In cases where a caller was passing bus->number previously to iommu_table_setparms_lpar() rather than phb->bus->number, this can lead to a different value in tbl->it_busno. The only example of this was the removed pci_dma_dev_setup_pSeriesLP(), removed in "ppc/iommu: remove unneeded pci_dma_dev_setup_pSeriesLP". [BenH: You updated only one of the two callers. Fixed that for you] Signed-off-by: Milton Miller <miltonm@bga.com> Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-12-09powerpc/pseries: Do not need to check for dma_window == NULLNishanth Aravamudan1-6/+0
The block in pci_dma_dev_setup_pSeriesLP for dma_window == NULL can be removed because we will only teminate the loop if we had already allocated a iommu table for that node or we found a window. While there may be no window for the device, the intresting part is if we are reusing a table or creating it for the first device under it. Signed-off-by: Milton Miller <miltonm@bga.com> Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-12-09powerpc/pseries: Checking for pdn->parent is redundantNishanth Aravamudan1-4/+1
The device tree root is never a pci bus, and will not have a PCI_DN(pdn), so the check for PCI_DN added in 650f7b3b2f0ead0673e90452cf3dedde97c537ba makes the check for pdn->parent redundant and it can be removed. Signed-off-by: Milton Miller <miltonm@bga.com> Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-12-09powerpc/pseries: Do not search for dma-window property on dlpar removeNishanth Aravamudan1-5/+1
The iommu_table pointer in the pci auxiliary struct of device_node has not been used by the iommu ops since the dma refactor of 12d04eef927bf61328af2c7cbe756c96f98ac3bf, however this code still uses it to find tables for dlpar. By only setting the PCI_DN iommu_table pointer on nodes with dma window properties, we will be able to quickly find the node for later checks, and can remove the table without looking for the the dma window property on dlpar remove. Signed-off-by: Milton Miller <miltonm@bga.com> Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-12-09Merge remote branch 'jwb/next' into nextBenjamin Herrenschmidt1-1/+4
2010-12-09Merge branch 'nvram' into nextBenjamin Herrenschmidt2-0/+209
2010-11-30powerpc/nvram: Rename ppc64,linux partition to ibm,rtas-logBenjamin Herrenschmidt1-10/+13
I'm not aware of any userspace tool accessing it by its name anyways, it's read back by the kernel itself on the next boot to get back older log entries Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-11-30powerpc/nvram: Move the log partition stuff to pseriesBenjamin Herrenschmidt1-0/+200
The nvram log partition stuff currently in nvram_64.c is really pseries specific. It isn't actually used on anything else (despite the fact that we ran the code to setup the partition on anything except powermac) and the log format is specific to pseries RTAS implementation. So move it where it belongs Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-11-30powerpc/nvram: More flexible nvram_create_partition()Benjamin Herrenschmidt1-3/+3
Replace nvram_create_os_partition() with a variant that takes the partition name, signature and size as arguments. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-11-30powerpc/nvram: Move things out of asm/nvram.hBenjamin Herrenschmidt2-0/+6
This moves a bunch of definitions out of asm/nvram.h to the files that use them or just outright remove completely unused stuff. We leave the partition signatures definitions, they will be useful Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-11-29powerpc/4xx: Add suspend and idle supportVictor Gallardo1-1/+4
Add suspend/resume support for 4xx compatible CPUs. See /sys/power/state for available power states configured in. Add two different idle states (idle-wait and idle-doze) controlled via sysfs. Default is idle-wait. cat /sys/devices/system/cpu/cpu0/idle [wait] doze To save additional power, use idle-doze. echo doze > /sys/devices/system/cpu/cpu0/idle cat /sys/devices/system/cpu/cpu0/idle wait [doze] Signed-off-by: Victor Gallardo <vgallardo@apm.com> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2010-11-29powerpc: Remove second definition of STACK_FRAME_OVERHEADStephen Rothwell1-0/+1
Since STACK_FRAME_OVERHEAD is defined in asm/ptrace.h and that is ASSEMBER safe, we can just include that instead of going via asm-offsets.h. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-11-29powerpc: Add VPHN firmware featureJesse Larrew1-0/+1
This simple patch adds the firmware feature for VPHN to the firmware features bitmask. Signed-off-by: Jesse Larrew <jlarrew@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-11-29powerpc/iseries: Remove unused mf_getSrcHistory function and caller.Jesper Juhl1-62/+0
On Tue, 2 Nov 2010, Michael Ellerman wrote: > On Mon, 2010-11-01 at 22:20 +0100, Jesper Juhl wrote: > > Hi Stephen, > > > > On Tue, 2 Nov 2010, Stephen Rothwell wrote: > > > > > On Mon, 1 Nov 2010 21:06:23 +0100 (CET) Jesper Juhl <jj@chaosbits.net> wrote: > > > > > > > > Remove unused function 'mf_getSrcHistory' (that will never be used ever > > > > according to Stephen Rothwell). > > > > > > > > Signed-off-by: Jesper Juhl <jj@chaosbits.net> > > > > > > Acked-by: Stephen Rothwell <sfr@canb.auug.org.au> > > > > > > > Ok, so if you are the (unofficial) iSeries maintainer and you don't merge > > the patch somewhere that'll eventually go up-stream, but just ACK it > > (thank you for that btw), then where do I send it to get it merged? > > Here. ie. linuxppc-dev. > > But, while you're removing it you should remove the #if 0'ed callsite as > well, see mf_src_proc_show() in that file. :) > Done. See patch below. Remove unused function 'mf_getSrcHistory' (that will never be used ever according to Stephen Rothwell) and also remove most of (under 'if 0') code from mf_src_proc_show() where the function was called. Signed-off-by: Jesper Juhl <jj@chaosbits.net> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-11-29powerpc/cell: Use vzalloc rather than vmalloc and memset in spu_alloc_lscsa_stdJesper Juhl1-2/+1
Hi, We can get rid of a memset in arch/powerpc/platforms/cell/spufs/lscsa_alloc.c::spu_alloc_lscsa_std() by using vzalloc() rather than vmalloc()+memset(). Completely untested patch below since I have no hardware nor tools to compile this. Signed-off-by: Jesper Juhl <jj@chaosbits.net> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-11-29powerpc/pseries: iommu cleanupNishanth Aravamudan1-7/+2
No need to initialize per-cpu pointer to NULL, it is the default. Direct dma ops and no setup are the defaults, no need to set for iommu-off. Signed-off-by: Milton Miller <miltonm@bga.com> Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com> Reviewed-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-11-29powerpc/cell: Beat dma ops cleanupNishanth Aravamudan1-2/+1
direct_dma_ops is the default pci dma ops. No need to call a function to get the pci dma ops, we know they are the dma_direct_ops. Signed-off-by: Milton Miller <miltonm@bga.com> Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-11-29powerpc/pasemi: Clean up pasemi iommu table initializationsNishanth Aravamudan1-18/+1
No need for empty helpers with iommu off, the ppc_md hooks are optional. The direct_dma_ops are the default pci_dma_ops, so no need to set in the them iommu off case. No need to set the device tree device_node pci node iommu pointer, its only used for dlpar remove. Signed-off-by: Milton Miller <miltonm@bga.com> Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com> Acked-by: Olof Johansson <olof@lixom.net> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
generated by cgit v1.2.3 (git 2.39.1) at 2025-01-20 14:50:12 +0000