summaryrefslogtreecommitdiffstats
path: root/arch/powerpc/net
AgeCommit message (Collapse)AuthorFilesLines
2018-01-26bpf, ppc64: remove obsolete exception handling from div/modDaniel Borkmann1-8/+0
Since we've changed div/mod exception handling for src_reg in eBPF verifier itself, remove the leftovers from ppc64 JIT. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-01-19bpf: get rid of pure_initcall dependency to enable jitsDaniel Borkmann2-4/+0
Having a pure_initcall() callback just to permanently enable BPF JITs under CONFIG_BPF_JIT_ALWAYS_ON is unnecessary and could leave a small race window in future where JIT is still disabled on boot. Since we know about the setting at compilation time anyway, just initialize it properly there. Also consolidate all the individual bpf_jit_enable variables into a single one and move them under one location. Moreover, don't allow for setting unspecified garbage values on them. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2017-12-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-2/+4
Lots of overlapping changes. Also on the net-next side the XDP state management is handled more in the generic layers so undo the 'net' nfp fix which isn't applicable in net-next. Include a necessary change by Jakub Kicinski, with log message: ==================== cls_bpf no longer takes care of offload tracking. Make sure netdevsim performs necessary checks. This fixes a warning caused by TC trying to remove a filter it has not added. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-17bpf: fix net.core.bpf_jit_enable raceAlexei Starovoitov1-1/+1
global bpf_jit_enable variable is tested multiple times in JITs, blinding and verifier core. The malicious root can try to toggle it while loading the programs. This race condition was accounted for and there should be no issues, but it's safer to avoid this race condition. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-15bpf, ppc64: do not reload skb pointers in non-skb contextDaniel Borkmann1-2/+4
The assumption of unconditionally reloading skb pointers on BPF helper calls where bpf_helper_changes_pkt_data() holds true is wrong. There can be different contexts where the helper would enforce a reload such as in case of XDP. Here, we do have a struct xdp_buff instead of struct sk_buff as context, thus this will access garbage. JITs only ever need to deal with cached skb pointer reload when ld_abs/ind was seen, therefore guard the reload behind SEEN_SKB. Fixes: 156d0e290e96 ("powerpc/ebpf/jit: Implement JIT compiler for extended BPF") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Tested-by: Sandipan Das <sandipan@linux.vnet.ibm.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2017-11-16Merge tag 'powerpc-4.15-1' of ↵Linus Torvalds2-9/+14
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc updates from Michael Ellerman: "A bit of a small release, I suspect in part due to me travelling for KS. But my backlog of patches to review is smaller than usual, so I think in part folks just didn't send as much this cycle. Non-highlights: - Five fixes for the >128T address space handling, both to fix bugs in our implementation and to bring the semantics exactly into line with x86. Highlights: - Support for a new OPAL call on bare metal machines which gives us a true NMI (ie. is not masked by MSR[EE]=0) for debugging etc. - Support for Power9 DD2 in the CXL driver. - Improvements to machine check handling so that uncorrectable errors can be reported into the generic memory_failure() machinery. - Some fixes and improvements for VPHN, which is used under PowerVM to notify the Linux partition of topology changes. - Plumbing to enable TM (transactional memory) without suspend on some Power9 processors (PPC_FEATURE2_HTM_NO_SUSPEND). - Support for emulating vector loads form cache-inhibited memory, on some Power9 revisions. - Disable the fast-endian switch "syscall" by default (behind a CONFIG), we believe it has never had any users. - A major rework of the API drivers use when initiating and waiting for long running operations performed by OPAL firmware, and changes to the powernv_flash driver to use the new API. - Several fixes for the handling of FP/VMX/VSX while processes are using transactional memory. - Optimisations of TLB range flushes when using the radix MMU on Power9. - Improvements to the VAS facility used to access coprocessors on Power9, and related improvements to the way the NX crypto driver handles requests. - Implementation of PMEM_API and UACCESS_FLUSHCACHE for 64-bit. Thanks to: Alexey Kardashevskiy, Alistair Popple, Allen Pais, Andrew Donnellan, Aneesh Kumar K.V, Arnd Bergmann, Balbir Singh, Benjamin Herrenschmidt, Breno Leitao, Christophe Leroy, Christophe Lombard, Cyril Bur, Frederic Barrat, Gautham R. Shenoy, Geert Uytterhoeven, Guilherme G. Piccoli, Gustavo Romero, Haren Myneni, Joel Stanley, Kamalesh Babulal, Kautuk Consul, Markus Elfring, Masami Hiramatsu, Michael Bringmann, Michael Neuling, Michal Suchanek, Naveen N. Rao, Nicholas Piggin, Oliver O'Halloran, Paul Mackerras, Pedro Miraglia Franco de Carvalho, Philippe Bergheaud, Sandipan Das, Seth Forshee, Shriya, Stephen Rothwell, Stewart Smith, Sukadev Bhattiprolu, Tyrel Datwyler, Vaibhav Jain, Vaidyanathan Srinivasan, and William A. Kennington III" * tag 'powerpc-4.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (151 commits) powerpc/64s: Fix Power9 DD2.0 workarounds by adding DD2.1 feature powerpc/64s: Fix masking of SRR1 bits on instruction fault powerpc/64s: mm_context.addr_limit is only used on hash powerpc/64s/radix: Fix 128TB-512TB virtual address boundary case allocation powerpc/64s/hash: Allow MAP_FIXED allocations to cross 128TB boundary powerpc/64s/hash: Fix fork() with 512TB process address space powerpc/64s/hash: Fix 128TB-512TB virtual address boundary case allocation powerpc/64s/hash: Fix 512T hint detection to use >= 128T powerpc: Fix DABR match on hash based systems powerpc/signal: Properly handle return value from uprobe_deny_signal() powerpc/fadump: use kstrtoint to handle sysfs store powerpc/lib: Implement UACCESS_FLUSHCACHE API powerpc/lib: Implement PMEM API powerpc/powernv/npu: Don't explicitly flush nmmu tlb powerpc/powernv/npu: Use flush_all_mm() instead of flush_tlb_mm() powerpc/powernv/idle: Round up latency and residency values powerpc/kprobes: refactor kprobe_lookup_name for safer string operations powerpc/kprobes: Blacklist emulate_update_regs() from kprobes powerpc/kprobes: Do not disable interrupts for optprobes and kprobes_on_ftrace powerpc/kprobes: Disable preemption before invoking probe handler for optprobes ...
2017-11-06bpf: take advantage of stack_depth tracking in powerpc JITSandipan Das2-9/+14
Take advantage of stack_depth tracking, originally introduced for x64, in powerpc JIT as well. Round up allocated stack by 16 bytes to make sure it stays aligned for functions called from JITed bpf program. Signed-off-by: Sandipan Das <sandipan@linux.vnet.ibm.com> Reviewed-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman1-0/+1
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-07Merge tag 'powerpc-4.14-1' of ↵Linus Torvalds1-5/+1
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc updates from Michael Ellerman: "Nothing really major this release, despite quite a lot of activity. Just lots of things all over the place. Some things of note include: - Access via perf to a new type of PMU (IMC) on Power9, which can count both core events as well as nest unit events (Memory controller etc). - Optimisations to the radix MMU TLB flushing, mostly to avoid unnecessary Page Walk Cache (PWC) flushes when the structure of the tree is not changing. - Reworks/cleanups of do_page_fault() to modernise it and bring it closer to other architectures where possible. - Rework of our page table walking so that THP updates only need to send IPIs to CPUs where the affected mm has run, rather than all CPUs. - The size of our vmalloc area is increased to 56T on 64-bit hash MMU systems. This avoids problems with the percpu allocator on systems with very sparse NUMA layouts. - STRICT_KERNEL_RWX support on PPC32. - A new sched domain topology for Power9, to capture the fact that pairs of cores may share an L2 cache. - Power9 support for VAS, which is a new mechanism for accessing coprocessors, and initial support for using it with the NX compression accelerator. - Major work on the instruction emulation support, adding support for many new instructions, and reworking it so it can be used to implement the emulation needed to fixup alignment faults. - Support for guests under PowerVM to use the Power9 XIVE interrupt controller. And probably that many things again that are almost as interesting, but I had to keep the list short. Plus the usual fixes and cleanups as always. Thanks to: Alexey Kardashevskiy, Alistair Popple, Andreas Schwab, Aneesh Kumar K.V, Anju T Sudhakar, Arvind Yadav, Balbir Singh, Benjamin Herrenschmidt, Bhumika Goyal, Breno Leitao, Bryant G. Ly, Christophe Leroy, Cédric Le Goater, Dan Carpenter, Dou Liyang, Frederic Barrat, Gautham R. Shenoy, Geliang Tang, Geoff Levand, Hannes Reinecke, Haren Myneni, Ivan Mikhaylov, John Allen, Julia Lawall, LABBE Corentin, Laurentiu Tudor, Madhavan Srinivasan, Markus Elfring, Masahiro Yamada, Matt Brown, Michael Neuling, Murilo Opsfelder Araujo, Nathan Fontenot, Naveen N. Rao, Nicholas Piggin, Oliver O'Halloran, Paul Mackerras, Rashmica Gupta, Rob Herring, Rui Teng, Sam Bobroff, Santosh Sivaraj, Scott Wood, Shilpasri G Bhat, Sukadev Bhattiprolu, Suraj Jitindar Singh, Tobin C. Harding, Victor Aoqui" * tag 'powerpc-4.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (321 commits) powerpc/xive: Fix section __init warning powerpc: Fix kernel crash in emulation of vector loads and stores powerpc/xive: improve debugging macros powerpc/xive: add XIVE Exploitation Mode to CAS powerpc/xive: introduce H_INT_ESB hcall powerpc/xive: add the HW IRQ number under xive_irq_data powerpc/xive: introduce xive_esb_write() powerpc/xive: rename xive_poke_esb() in xive_esb_read() powerpc/xive: guest exploitation of the XIVE interrupt controller powerpc/xive: introduce a common routine xive_queue_page_alloc() powerpc/sstep: Avoid used uninitialized error axonram: Return directly after a failed kzalloc() in axon_ram_probe() axonram: Improve a size determination in axon_ram_probe() axonram: Delete an error message for a failed memory allocation in axon_ram_probe() powerpc/powernv/npu: Move tlb flush before launching ATSD powerpc/macintosh: constify wf_sensor_ops structures powerpc/iommu: Use permission-specific DEVICE_ATTR variants powerpc/eeh: Delete an error out of memory message at init time powerpc/mm: Use seq_putc() in two functions macintosh: Convert to using %pOF instead of full_name ...
2017-08-17powerpc/bpf: Use memset32() to pre-fill traps in BPF page(s)Naveen N. Rao1-5/+1
Use the newly introduced memset32() to pre-fill BPF page(s) with trap instructions. Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-09bpf, ppc64: implement jiting of BPF_J{LT, LE, SLT, SLE}Daniel Borkmann2-0/+21
This work implements jiting of BPF_J{LT,LE,SLT,SLE} instructions with BPF_X/BPF_K variants for the ppc64 eBPF JIT. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Tested-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-06bpf: Add jited_len to struct bpf_progMartin KaFai Lau1-0/+1
Add jited_len to struct bpf_prog. It will be useful for the struct bpf_prog_info which will be added in the later patch. Signed-off-by: Martin KaFai Lau <kafai@fb.com> Acked-by: Alexei Starovoitov <ast@fb.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-31bpf: free up BPF_JMP | BPF_CALL | BPF_X opcodeAlexei Starovoitov1-1/+1
free up BPF_JMP | BPF_CALL | BPF_X opcode to be used by actual indirect call by register and use kernel internal opcode to mark call instruction into bpf_tail_call() helper. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-22Merge tag 'powerpc-4.11-1' of ↵Linus Torvalds3-22/+22
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc updates from Michael Ellerman: "Highlights include: - Support for direct mapped LPC on POWER9, giving Linux direct access to devices that may be on there such as a UART. - Memory hotplug support for the Power9 Radix MMU. - Add new AUX vectors describing the processor's cache geometry, to be used by glibc. - The ability for a guest to ask the hypervisor to resize the guest's hash table, and in addition support for doing so automatically when memory is hotplugged into/out-of the guest. This allows the hash table to be sized based on the current memory usage of the guest, rather than the maximum possible memory usage. - Implementation of optprobes (kprobe optimisation) for powerpc. In addition there's the topic branch shared with the KVM tree, which includes support for guests to use the Radix MMU on Power9. Thanks to: Alistair Popple, Andrew Donnellan, Aneesh Kumar K.V, Anju T, Anton Blanchard, Benjamin Herrenschmidt, Chris Packham, Daniel Axtens, Daniel Borkmann, David Gibson, Finn Thain, Gautham R. Shenoy, Gavin Shan, Greg Kurz, Joel Stanley, John Allen, Madhavan Srinivasan, Mahesh Salgaonkar, Markus Elfring, Michael Neuling, Nathan Fontenot, Naveen N. Rao, Nicholas Piggin, Paul Mackerras, Ravi Bangoria, Reza Arbab, Shailendra Singh, Vaibhav Jain, Wei Yongjun" * tag 'powerpc-4.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (129 commits) powerpc/mm/radix: Skip ptesync in pte update helpers powerpc/mm/radix: Use ptep_get_and_clear_full when clearing pte for full mm powerpc/mm/radix: Update pte update sequence for pte clear case powerpc/mm: Update PROTFAULT handling in the page fault path powerpc/xmon: Fix data-breakpoint powerpc/mm: Fix build break with BOOK3S_64=n and MEMORY_HOTPLUG=y powerpc/mm: Fix build break when CMA=n && SPAPR_TCE_IOMMU=y powerpc/mm: Fix build break with RADIX=y & HUGETLBFS=n powerpc/pseries: Fix typo in parameter description powerpc/kprobes: Remove kprobe_exceptions_notify() kprobes: Introduce weak variant of kprobe_exceptions_notify() powerpc/ftrace: Fix confusing help text for DISABLE_MPROFILE_KERNEL powerpc/powernv: Fix opal_exit tracepoint opcode powerpc: Add a prototype for mcount() so it can be versioned powerpc: Drop GPL from of_node_to_nid() export to match other arches powerpc/kprobes: Optimize kprobe in kretprobe_trampoline() powerpc/kprobes: Implement Optprobes powerpc/kprobes: Fixes for kprobe_lookup_name() on BE powerpc: Add helper to check if offset is within relative branch range powerpc/bpf: Introduce __PPC_SH64() ...
2017-02-17bpf: make jited programs visible in tracesDaniel Borkmann1-0/+1
Long standing issue with JITed programs is that stack traces from function tracing check whether a given address is kernel code through {__,}kernel_text_address(), which checks for code in core kernel, modules and dynamically allocated ftrace trampolines. But what is still missing is BPF JITed programs (interpreted programs are not an issue as __bpf_prog_run() will be attributed to them), thus when a stack trace is triggered, the code walking the stack won't see any of the JITed ones. The same for address correlation done from user space via reading /proc/kallsyms. This is read by tools like perf, but the latter is also useful for permanent live tracing with eBPF itself in combination with stack maps when other eBPF types are part of the callchain. See offwaketime example on dumping stack from a map. This work tries to tackle that issue by making the addresses and symbols known to the kernel. The lookup from *kernel_text_address() is implemented through a latched RB tree that can be read under RCU in fast-path that is also shared for symbol/size/offset lookup for a specific given address in kallsyms. The slow-path iteration through all symbols in the seq file done via RCU list, which holds a tiny fraction of all exported ksyms, usually below 0.1 percent. Function symbols are exported as bpf_prog_<tag>, in order to aide debugging and attribution. This facility is currently enabled for root-only when bpf_jit_kallsyms is set to 1, and disabled if hardening is active in any mode. The rationale behind this is that still a lot of systems ship with world read permissions on kallsyms thus addresses should not get suddenly exposed for them. If that situation gets much better in future, we always have the option to change the default on this. Likewise, unprivileged programs are not allowed to add entries there either, but that is less of a concern as most such programs types relevant in this context are for root-only anyway. If enabled, call graphs and stack traces will then show a correct attribution; one example is illustrated below, where the trace is now visible in tooling such as perf script --kallsyms=/proc/kallsyms and friends. Before: 7fff8166889d bpf_clone_redirect+0x80007f0020ed (/lib/modules/4.9.0-rc8+/build/vmlinux) f5d80 __sendmsg_nocancel+0xffff006451f1a007 (/usr/lib64/libc-2.18.so) After: 7fff816688b7 bpf_clone_redirect+0x80007f002107 (/lib/modules/4.9.0-rc8+/build/vmlinux) 7fffa0575728 bpf_prog_33c45a467c9e061a+0x8000600020fb (/lib/modules/4.9.0-rc8+/build/vmlinux) 7fffa07ef1fc cls_bpf_classify+0x8000600020dc (/lib/modules/4.9.0-rc8+/build/vmlinux) 7fff81678b68 tc_classify+0x80007f002078 (/lib/modules/4.9.0-rc8+/build/vmlinux) 7fff8164d40b __netif_receive_skb_core+0x80007f0025fb (/lib/modules/4.9.0-rc8+/build/vmlinux) 7fff8164d718 __netif_receive_skb+0x80007f002018 (/lib/modules/4.9.0-rc8+/build/vmlinux) 7fff8164e565 process_backlog+0x80007f002095 (/lib/modules/4.9.0-rc8+/build/vmlinux) 7fff8164dc71 net_rx_action+0x80007f002231 (/lib/modules/4.9.0-rc8+/build/vmlinux) 7fff81767461 __softirqentry_text_start+0x80007f0020d1 (/lib/modules/4.9.0-rc8+/build/vmlinux) 7fff817658ac do_softirq_own_stack+0x80007f00201c (/lib/modules/4.9.0-rc8+/build/vmlinux) 7fff810a2c20 do_softirq+0x80007f002050 (/lib/modules/4.9.0-rc8+/build/vmlinux) 7fff810a2cb5 __local_bh_enable_ip+0x80007f002085 (/lib/modules/4.9.0-rc8+/build/vmlinux) 7fff8168d452 ip_finish_output2+0x80007f002152 (/lib/modules/4.9.0-rc8+/build/vmlinux) 7fff8168ea3d ip_finish_output+0x80007f00217d (/lib/modules/4.9.0-rc8+/build/vmlinux) 7fff8168f2af ip_output+0x80007f00203f (/lib/modules/4.9.0-rc8+/build/vmlinux) [...] 7fff81005854 do_syscall_64+0x80007f002054 (/lib/modules/4.9.0-rc8+/build/vmlinux) 7fff817649eb return_from_SYSCALL_64+0x80007f002000 (/lib/modules/4.9.0-rc8+/build/vmlinux) f5d80 __sendmsg_nocancel+0xffff01c484812007 (/usr/lib64/libc-2.18.so) Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Cc: linux-kernel@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-17bpf: remove stubs for cBPF from arch codeDaniel Borkmann1-2/+0
Remove the dummy bpf_jit_compile() stubs for eBPF JITs and make that a single __weak function in the core that can be overridden similarly to the eBPF one. Also remove stale pr_err() mentions of bpf_jit_compile. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-10powerpc/bpf: Introduce __PPC_SH64()Naveen N. Rao1-6/+5
Introduce __PPC_SH64() as a 64-bit variant to encode shift field in some of the shift and rotate instructions operating on double-words. Convert some of the BPF instruction macros to use the same. Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-01-25powerpc/bpf: Flush the entire JIT bufferNaveen N. Rao1-2/+2
With bpf_jit_binary_alloc(), we allocate at a page granularity and fill the rest of the space with illegal instructions to mitigate BPF spraying attacks, while having the actual JIT'ed BPF program at a random location within the allocated space. Under this scenario, it would be better to flush the entire allocated buffer rather than just the part containing the actual program. We already flush the buffer from start to the end of the BPF program. Extend this to include the illegal instructions after the BPF program. Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-01-25powerpc/bpf: Remove redundant check for non-null imageDaniel Borkmann2-16/+17
We have a check earlier to ensure we don't proceed if image is NULL. As such, the redundant check can be removed. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> [Added similar changes for classic BPF JIT] Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-12-08bpf: xdp: Allow head adjustment in XDP progMartin KaFai Lau1-2/+2
This patch allows XDP prog to extend/remove the packet data at the head (like adding or removing header). It is done by adding a new XDP helper bpf_xdp_adjust_head(). It also renames bpf_helper_changes_skb_data() to bpf_helper_changes_pkt_data() to better reflect that XDP prog does not work on skb. This patch adds one "xdp_adjust_head" bit to bpf_prog for the XDP-capable driver to check if the XDP prog requires bpf_xdp_adjust_head() support. The driver can then decide to error out during XDP_SETUP_PROG. Signed-off-by: Martin KaFai Lau <kafai@fb.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-04powerpc/bpf: Add support for bpf constant blindingNaveen N. Rao2-11/+34
In line with similar support for other architectures by Daniel Borkmann. 'MOD Default X' from test_bpf without constant blinding: 84 bytes emitted from JIT compiler (pass:3, flen:7) d0000000058a4688 + <x>: 0: nop 4: nop 8: std r27,-40(r1) c: std r28,-32(r1) 10: xor r8,r8,r8 14: xor r28,r28,r28 18: mr r27,r3 1c: li r8,66 20: cmpwi r28,0 24: bne 0x0000000000000030 28: li r8,0 2c: b 0x0000000000000044 30: divwu r9,r8,r28 34: mullw r9,r28,r9 38: subf r8,r9,r8 3c: rotlwi r8,r8,0 40: li r8,66 44: ld r27,-40(r1) 48: ld r28,-32(r1) 4c: mr r3,r8 50: blr ... and with constant blinding: 140 bytes emitted from JIT compiler (pass:3, flen:11) d00000000bd6ab24 + <x>: 0: nop 4: nop 8: std r27,-40(r1) c: std r28,-32(r1) 10: xor r8,r8,r8 14: xor r28,r28,r28 18: mr r27,r3 1c: lis r2,-22834 20: ori r2,r2,36083 24: rotlwi r2,r2,0 28: xori r2,r2,36017 2c: xoris r2,r2,42702 30: rotlwi r2,r2,0 34: mr r8,r2 38: rotlwi r8,r8,0 3c: cmpwi r28,0 40: bne 0x000000000000004c 44: li r8,0 48: b 0x000000000000007c 4c: divwu r9,r8,r28 50: mullw r9,r28,r9 54: subf r8,r9,r8 58: rotlwi r8,r8,0 5c: lis r2,-17137 60: ori r2,r2,39065 64: rotlwi r2,r2,0 68: xori r2,r2,39131 6c: xoris r2,r2,48399 70: rotlwi r2,r2,0 74: mr r8,r2 78: rotlwi r8,r8,0 7c: ld r27,-40(r1) 80: ld r28,-32(r1) 84: mr r3,r8 88: blr Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-10-04powerpc/bpf: Implement support for tail callsNaveen N. Rao3-28/+124
Tail calls allow JIT'ed eBPF programs to call into other JIT'ed eBPF programs. This can be achieved either by: (1) retaining the stack setup by the first eBPF program and having all subsequent eBPF programs re-using it, or, (2) by unwinding/tearing down the stack and having each eBPF program deal with its own stack as it sees fit. To ensure that this does not create loops, there is a limit to how many tail calls can be done (currently 32). This requires the JIT'ed code to maintain a count of the number of tail calls done so far. Approach (1) is simple, but requires every eBPF program to have (almost) the same prologue/epilogue, regardless of whether they need it. This is inefficient for small eBPF programs which may not sometimes need a prologue at all. As such, to minimize impact of tail call implementation, we use approach (2) here which needs each eBPF program in the chain to use its own prologue/epilogue. This is not ideal when many tail calls are involved and when all the eBPF programs in the chain have similar prologue/epilogue. However, the impact is restricted to programs that do tail calls. Individual eBPF programs are not affected. We maintain the tail call count in a fixed location on the stack and updated tail call count values are passed in through this. The very first eBPF program in a chain sets this up to 0 (the first 2 instructions). Subsequent tail calls skip the first two eBPF JIT instructions to maintain the count. For programs that don't do tail calls themselves, the first two instructions are NOPs. Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-10-04powerpc/bpf: Introduce accessors for using the tmp local stack spaceNaveen N. Rao2-40/+55
While at it, ensure that the location of the local save area is consistent whether or not we setup our own stackframe. This property is utilised in the next patch that adds support for tail calls. Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-06-24powerpc/ebpf/jit: Implement JIT compiler for extended BPFNaveen N. Rao5-1/+1292
PPC64 eBPF JIT compiler. Enable with: echo 1 > /proc/sys/net/core/bpf_jit_enable or echo 2 > /proc/sys/net/core/bpf_jit_enable ... to see the generated JIT code. This can further be processed with tools/net/bpf_jit_disasm. With CONFIG_TEST_BPF=m and 'modprobe test_bpf': test_bpf: Summary: 305 PASSED, 0 FAILED, [297/297 JIT'ed] ... on both ppc64 BE and LE. The details of the approach are documented through various comments in the code. Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-06-24powerpc/bpf/jit: Isolate classic BPF JIT specifics into a separate headerNaveen N. Rao4-121/+143
Break out classic BPF JIT specifics into a separate header in preparation for eBPF JIT implementation. Note that ppc32 will still need the classic BPF JIT. Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-06-24powerpc/bpf/jit: A few cleanupsNaveen N. Rao2-10/+11
1. Per the ISA, ADDIS actually uses RT, rather than RS. Though the result is the same, make the usage clear. 2. The multiply instruction used is a 32-bit multiply. Rename PPC_MUL() to PPC_MULW() to make the same clear. 3. PPC_STW[U] take the entire 16-bit immediate value and do not require word-alignment, per the ISA. Change the macros to use IMM_L(). 4. A few white-space cleanups to satisfy checkpatch.pl. Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-06-24powerpc/bpf/jit: Introduce rotate immediate instructionsNaveen N. Rao1-9/+11
Since we will be using the rotate immediate instructions for extended BPF JIT, let's introduce macros for the same. And since the shift immediate operations use the rotate immediate instructions, let's redo those macros to use the newly introduced instructions. Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-06-24powerpc/bpf/jit: Optimize 64-bit Immediate loadsNaveen N. Rao1-6/+11
Similar to the LI32() optimization, if the value can be represented in 32-bits, use LI32(). Also handle loading a few specific forms of immediate values in an optimum manner. Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-06-24powerpc/bpf/jit: Fix/enhance 32-bit Load Immediate implementationNaveen N. Rao1-3/+10
The existing LI32() macro can sometimes result in a sign-extended 32-bit load that does not clear the top 32-bits properly. As an example, loading 0x7fffffff results in the register containing 0xffffffff7fffffff. While this does not impact classic BPF JIT implementation (since that only uses the lower word for all operations), we would like to share this macro between classic BPF JIT and extended BPF JIT, wherein the entire 64-bit value in the register matters. Fix this by first doing a shifted LI followed by ORI. An additional optimization is with loading values between -32768 to -1, where we now only need a single LI. The new implementation now generates the same or less number of instructions. Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-01-06net: filter: make JITs zero A for SKF_AD_ALU_XOR_XRabin Vincent1-11/+2
The SKF_AD_ALU_XOR_X ancillary is not like the other ancillary data instructions since it XORs A with X while all the others replace A with some loaded value. All the BPF JITs fail to clear A if this is used as the first instruction in a filter. This was found using american fuzzy lop. Add a helper to determine if A needs to be cleared given the first instruction in a filter, and use this in the JITs. Except for ARM, the rest have only been compile-tested. Fixes: 3480593131e0 ("net: filter: get rid of BPF_S_* enum") Signed-off-by: Rabin Vincent <rabin@rab.in> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-03ebpf: migrate bpf_prog's flags to bitfieldDaniel Borkmann1-1/+1
As we need to add further flags to the bpf_prog structure, lets migrate both bools to a bitfield representation. The size of the base structure (excluding insns) remains unchanged at 40 bytes. Add also tags for the kmemchecker, so that it doesn't throw false positives. Even in case gcc would generate suboptimal code, it's not being accessed in performance critical paths. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-20ppc: bpf: Add SKF_AD_CPU for ppc32Denis Kirjanov2-13/+18
Signed-off-by: Denis Kirjanov <kda@linux-powerpc.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-20ppc: bpf: rename bpf_jit_64.S to bpf_jit_asm.SDenis Kirjanov2-1/+1
Signed-off-by: Denis Kirjanov <kda@linux-powerpc.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-20ppc: bpf: update jit to use compatibility macrosDenis Kirjanov3-51/+98
Use helpers from the asm-compat.h to wrap up assembly mnemonics Signed-off-by: Denis Kirjanov <kda@linux-powerpc.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-20module: remove mod arg from module_free, rename module_memfree().Rusty Russell1-1/+1
Nothing needs the module pointer any more, and the next patch will call it from RCU, where the module itself might no longer exist. Removing the arg is the safest approach. This just codifies the use of the module_alloc/module_free pattern which ftrace and bpf use. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Acked-by: Alexei Starovoitov <ast@kernel.org> Cc: Mikael Starvik <starvik@axis.com> Cc: Jesper Nilsson <jesper.nilsson@axis.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Ley Foon Tan <lftan@altera.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Chris Metcalf <cmetcalf@ezchip.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: x86@kernel.org Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: linux-cris-kernel@axis.com Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: nios2-dev@lists.rocketboards.org Cc: linuxppc-dev@lists.ozlabs.org Cc: sparclinux@vger.kernel.org Cc: netdev@vger.kernel.org
2014-11-18PPC: bpf_jit_comp: Unify BPF_MOD | BPF_X and BPF_DIV | BPF_XDenis Kirjanov1-19/+8
Reduce duplicated code by unifying BPF_ALU | BPF_MOD | BPF_X and BPF_ALU | BPF_DIV | BPF_X CC: Alexei Starovoitov<alexei.starovoitov@gmail.com> CC: Daniel Borkmann<dborkman@redhat.com> CC: Philippe Bergheaud<felix@linux.vnet.ibm.com> Signed-off-by: Denis Kirjanov <kda@linux-powerpc.org> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-11PPC: bpf_jit_comp: add SKF_AD_HATYPE instructionDenis Kirjanov1-4/+13
Add BPF extension SKF_AD_HATYPE to ppc JIT to check the hw type of the interface Before: [ 57.723666] test_bpf: #20 LD_HATYPE [ 57.723675] BPF filter opcode 0020 (@0) unsupported [ 57.724168] 48 48 PASS After: [ 103.053184] test_bpf: #20 LD_HATYPE 7 6 PASS CC: Alexei Starovoitov<alexei.starovoitov@gmail.com> CC: Daniel Borkmann<dborkman@redhat.com> CC: Philippe Bergheaud<felix@linux.vnet.ibm.com> Signed-off-by: Denis Kirjanov <kda@linux-powerpc.org> v2: address Alexei's comments Acked-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-03PPC: bpf_jit_comp: add SKF_AD_PKTTYPE instructionDenis Kirjanov2-0/+12
Add BPF extension SKF_AD_PKTTYPE to ppc JIT to load skb->pkt_type field. Before: [ 88.262622] test_bpf: #11 LD_IND_NET 86 97 99 PASS [ 88.265740] test_bpf: #12 LD_PKTTYPE 109 107 PASS After: [ 80.605964] test_bpf: #11 LD_IND_NET 44 40 39 PASS [ 80.607370] test_bpf: #12 LD_PKTTYPE 9 9 PASS CC: Alexei Starovoitov<alexei.starovoitov@gmail.com> CC: Michael Ellerman<mpe@ellerman.id.au> Cc: Matt Evans <matt@ozlabs.org> Signed-off-by: Denis Kirjanov <kda@linux-powerpc.org> v2: Added test rusults Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-09net: bpf: be friendly to kmemcheckDaniel Borkmann1-1/+1
Reported by Mikulas Patocka, kmemcheck currently barks out a false positive since we don't have special kmemcheck annotation for bitfields used in bpf_prog structure. We currently have jited:1, len:31 and thus when accessing len while CONFIG_KMEMCHECK enabled, kmemcheck throws a warning that we're reading uninitialized memory. As we don't need the whole bit universe for pages member, we can just split it to u16 and use a bool flag for jited instead of a bitfield. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-05net: bpf: make eBPF interpreter images read-onlyDaniel Borkmann1-1/+2
With eBPF getting more extended and exposure to user space is on it's way, hardening the memory range the interpreter uses to steer its command flow seems appropriate. This patch moves the to be interpreted bytecode to read-only pages. In case we execute a corrupted BPF interpreter image for some reason e.g. caused by an attacker which got past a verifier stage, it would not only provide arbitrary read/write memory access but arbitrary function calls as well. After setting up the BPF interpreter image, its contents do not change until destruction time, thus we can setup the image on immutable made pages in order to mitigate modifications to that code. The idea is derived from commit 314beb9bcabf ("x86: bpf_jit_comp: secure bpf jit against spraying attacks"). This is possible because bpf_prog is not part of sk_filter anymore. After setup bpf_prog cannot be altered during its life-time. This prevents any modifications to the entire bpf_prog structure (incl. function/JIT image pointer). Every eBPF program (including classic BPF that are migrated) have to call bpf_prog_select_runtime() to select either interpreter or a JIT image as a last setup step, and they all are being freed via bpf_prog_free(), including non-JIT. Therefore, we can easily integrate this into the eBPF life-time, plus since we directly allocate a bpf_prog, we have no performance penalty. Tested with seccomp and test_bpf testsuite in JIT/non-JIT mode and manual inspection of kernel_page_tables. Brad Spengler proposed the same idea via Twitter during development of this patch. Joint work with Hannes Frederic Sowa. Suggested-by: Brad Spengler <spender@grsecurity.net> Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Cc: Alexei Starovoitov <ast@plumgrid.com> Cc: Kees Cook <keescook@chromium.org> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-02net: filter: split 'struct sk_filter' into socket and bpf partsAlexei Starovoitov1-4/+4
clean up names related to socket filtering and bpf in the following way: - everything that deals with sockets keeps 'sk_*' prefix - everything that is pure BPF is changed to 'bpf_*' prefix split 'struct sk_filter' into struct sk_filter { atomic_t refcnt; struct rcu_head rcu; struct bpf_prog *prog; }; and struct bpf_prog { u32 jited:1, len:31; struct sock_fprog_kern *orig_prog; unsigned int (*bpf_func)(const struct sk_buff *skb, const struct bpf_insn *filter); union { struct sock_filter insns[0]; struct bpf_insn insnsi[0]; struct work_struct work; }; }; so that 'struct bpf_prog' can be used independent of sockets and cleans up 'unattached' bpf use cases split SK_RUN_FILTER macro into: SK_RUN_FILTER to be used with 'struct sk_filter *' and BPF_PROG_RUN to be used with 'struct bpf_prog *' __sk_filter_release(struct sk_filter *) gains __bpf_prog_release(struct bpf_prog *) helper function also perform related renames for the functions that work with 'struct bpf_prog *', since they're on the same lines: sk_filter_size -> bpf_prog_size sk_filter_select_runtime -> bpf_prog_select_runtime sk_filter_free -> bpf_prog_free sk_unattached_filter_create -> bpf_prog_create sk_unattached_filter_destroy -> bpf_prog_destroy sk_store_orig_filter -> bpf_prog_store_orig_filter sk_release_orig_filter -> bpf_release_orig_filter __sk_migrate_filter -> bpf_migrate_filter __sk_prepare_filter -> bpf_prepare_filter API for attaching classic BPF to a socket stays the same: sk_attach_filter(prog, struct sock *)/sk_detach_filter(struct sock *) and SK_RUN_FILTER(struct sk_filter *, ctx) to execute a program which is used by sockets, tun, af_packet API for 'unattached' BPF programs becomes: bpf_prog_create(struct bpf_prog **)/bpf_prog_destroy(struct bpf_prog *) and BPF_PROG_RUN(struct bpf_prog *, ctx) to execute a program which is used by isdn, ppp, team, seccomp, ptp, xt_bpf, cls_bpf, test_bpf Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-27powerpc: bpf: Fix the broken LD_VLAN_TAG_PRESENT testDenis Kirjanov1-2/+4
We have to return the boolean here if the tag presents or not, not just ANDing the TCI with the mask which results to: [ 709.412097] test_bpf: #18 LD_VLAN_TAG_PRESENT [ 709.412245] ret 4096 != 1 [ 709.412332] ret 4096 != 1 [ 709.412333] FAIL (2 times) Signed-off-by: Denis Kirjanov <kda@linux-powerpc.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-27powerpc: bpf: Use correct mask while accessing the VLAN tagDenis Kirjanov1-1/+3
To get a full tag (and not just a VID) we should access the TCI except the VLAN_TAG_PRESENT field (which means that 802.1q header is present). Also ensure that the VLAN_TAG_PRESENT stay on its place Signed-off-by: Denis Kirjanov <kda@linux-powerpc.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-01net: filter: get rid of BPF_S_* enumDaniel Borkmann2-83/+76
This patch finally allows us to get rid of the BPF_S_* enum. Currently, the code performs unnecessary encode and decode workarounds in seccomp and filter migration itself when a filter is being attached in order to overcome BPF_S_* encoding which is not used anymore by the new interpreter resp. JIT compilers. Keeping it around would mean that also in future we would need to extend and maintain this enum and related encoders/decoders. We can get rid of all that and save us these operations during filter attaching. Naturally, also JIT compilers need to be updated by this. Before JIT conversion is being done, each compiler checks if A is being loaded at startup to obtain information if it needs to emit instructions to clear A first. Since BPF extensions are a subset of BPF_LD | BPF_{W,H,B} | BPF_ABS variants, case statements for extensions can be removed at that point. To ease and minimalize code changes in the classic JITs, we have introduced bpf_anc_helper(). Tested with test_bpf on x86_64 (JIT, int), s390x (JIT, int), arm (JIT, int), i368 (int), ppc64 (JIT, int); for sparc we unfortunately didn't have access, but changes are analogous to the rest. Joint work with Alexei Starovoitov. Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Mircea Gherzan <mgherzan@gmail.com> Cc: Kees Cook <keescook@chromium.org> Acked-by: Chema Gonzalez <chemag@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-31net: filter: add jited flag to indicate jit compiled filtersDaniel Borkmann1-1/+2
This patch adds a jited flag into sk_filter struct in order to indicate whether a filter is currently jited or not. The size of sk_filter is not being expanded as the 32 bit 'len' member allows upper bits to be reused since a filter can currently only grow as large as BPF_MAXINSNS. Therefore, there's enough room also for other in future needed flags to reuse 'len' field if necessary. The jited flag also allows for having alternative interpreter functions running as currently, we can only detect jit compiled filters by testing fp->bpf_func to not equal the address of sk_run_filter(). Joint work with Alexei Starovoitov. Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Cc: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-26net: Rename skb->rxhash to skb->hashTom Herbert1-2/+2
The packet hash can be considered a property of the packet, not just on RX path. This patch changes name of rxhash and l4_rxhash skbuff fields to be hash and l4_hash respectively. This includes changing uses of the field in the code which don't call the access functions. Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Mahesh Bandewar <maheshb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-15bpf: do not use reciprocal divideEric Dumazet1-3/+4
At first Jakub Zawadzki noticed that some divisions by reciprocal_divide were not correct. (off by one in some cases) http://www.wireshark.org/~darkjames/reciprocal-buggy.c He could also show this with BPF: http://www.wireshark.org/~darkjames/set-and-dump-filter-k-bug.c The reciprocal divide in linux kernel is not generic enough, lets remove its use in BPF, as it is not worth the pain with current cpus. Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Jakub Zawadzki <darkjames-ws@darkjames.pl> Cc: Mircea Gherzan <mgherzan@gmail.com> Cc: Daniel Borkmann <dxchgb@gmail.com> Cc: Hannes Frederic Sowa <hannes@stressinduktion.org> Cc: Matt Evans <matt@ozlabs.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-12Merge branch 'next' of ↵Linus Torvalds3-16/+41
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc Pull powerpc updates from Benjamin Herrenschmidt: "The bulk of this is LE updates. One should now be able to build an LE kernel and even run some things in it. I'm still sitting on a handful of patches to enable the new ABI that I *might* still send this merge window around, but due to the incertainty (they are pretty fresh) I want to keep them separate. Other notable changes are some infrastructure bits to better handle PCI pass-through under KVM, some bits and pieces added to the new PowerNV platform support such as access to the CPU SCOM bus via sysfs, and support for EEH error handling on PHB3 (Power8 PCIe). We also grew arch_get_random_long() for both pseries and powernv when running on P7+ and P8, exploiting the HW rng. And finally various embedded updates from freescale" * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (154 commits) powerpc: Fix fatal SLB miss when restoring PPR powerpc/powernv: Reserve the correct PE number powerpc/powernv: Add PE to its own PELTV powerpc/powernv: Add support for indirect XSCOM via debugfs powerpc/scom: Improve debugfs interface powerpc/scom: Enable 64-bit addresses powerpc/boot: Properly handle the base "of" boot wrapper powerpc/bpf: Support MOD operation powerpc/bpf: Fix DIVWU instruction opcode of: Move definition of of_find_next_cache_node into common code. powerpc: Remove big endianness assumption in of_find_next_cache_node powerpc/tm: Remove interrupt disable in __switch_to() powerpc: word-at-a-time optimization for 64-bit Little Endian powerpc/bpf: BPF JIT compiler for 64-bit Little Endian powerpc: Only save/restore SDR1 if in hypervisor mode powerpc/pmu: Fix ADB_PMU_LED_IDE dependencies powerpc/nvram: Fix endian issue when using the partition length powerpc/nvram: Fix endian issue when reading the NVRAM size powerpc/nvram: Scan partitions only once powerpc/mpc512x: remove unnecessary #if ...
2013-10-31powerpc/bpf: Support MOD operationVladimir Murzin2-0/+21
commit b6069a9570 (filter: add MOD operation) added generic support for modulus operation in BPF. This patch brings JIT support for PPC64 Signed-off-by: Vladimir Murzin <murzin.v@gmail.com> Acked-by: Matt Evans <matt@ozlabs.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-10-31powerpc/bpf: BPF JIT compiler for 64-bit Little EndianPhilippe Bergheaud3-16/+20
This enables the Berkeley Packet Filter JIT compiler for the PowerPC running in 64bit Little Endian. Signed-off-by: Philippe Bergheaud <felix@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>