summaryrefslogtreecommitdiffstats
path: root/arch/powerpc/kernel/sysfs.c
AgeCommit message (Collapse)AuthorFilesLines
2014-05-28powerpc: Fix regression of per-CPU DSCR settingSam bobroff1-13/+19
Since commit "efcac65 powerpc: Per process DSCR + some fixes (try#4)" it is no longer possible to set the DSCR on a per-CPU basis. The old behaviour was to minipulate the DSCR SPR directly but this is no longer sufficient: the value is quickly overwritten by context switching. This patch stores the per-CPU DSCR value in a kernel variable rather than directly in the SPR and it is used whenever a process has not set the DSCR itself. The sysfs interface (/sys/devices/system/cpu/cpuN/dscr) is unchanged. Writes to the old global default (/sys/devices/system/cpu/dscr_default) now set all of the per-CPU values and reads return the last written value. The new per-CPU default is added to the paca_struct and is used everywhere outside of sysfs.c instead of the old global default. Signed-off-by: Sam Bobroff <sam.bobroff@au1.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-05-28powerpc: Split __SYSFS_SPRSETUP macroSam bobroff1-6/+13
Split the __SYSFS_SPRSETUP macro into two parts so that registers requiring custom read and write functions can use common code for their show and store functions. Signed-off-by: Sam Bobroff <sam.bobroff@au1.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-03-20powerpc, sysfs: Fix CPU hotplug callback registrationSrivatsa S. Bhat1-1/+7
Subsystems that want to register CPU hotplug callbacks, as well as perform initialization for the CPUs that are already online, often do it as shown below: get_online_cpus(); for_each_online_cpu(cpu) init_cpu(cpu); register_cpu_notifier(&foobar_cpu_notifier); put_online_cpus(); This is wrong, since it is prone to ABBA deadlocks involving the cpu_add_remove_lock and the cpu_hotplug.lock (when running concurrently with CPU hotplug operations). Instead, the correct and race-free way of performing the callback registration is: cpu_notifier_register_begin(); for_each_online_cpu(cpu) init_cpu(cpu); /* Note the use of the double underscored version of the API */ __register_cpu_notifier(&foobar_cpu_notifier); cpu_notifier_register_done(); Fix the sysfs code in powerpc by using this latter form of callback registration. Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Olof Johansson <olof@lixom.net> Cc: Wang Dongsheng <dongsheng.wang@freescale.com> Cc: Ingo Molnar <mingo@kernel.org> Acked-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com> Signed-off-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-01-29powerpc/pseries/cpuidle: smt-snooze-delay cleanup.Deepthi Dharwar1-2/+0
smt-snooze-delay was designed to disable NAP state or delay the entry to the NAP state prior to adoption of cpuidle framework. This is per-cpu variable. With the coming of CPUIDLE framework, states can be disabled on per-cpu basis using the cpuidle/enable sysfs entry. Also, with the coming of cpuidle driver each state's target residency is per-driver unlike earlier which was per-device. Therefore, the per-cpu sysfs smt-snooze-delay which decides the target residency of the idle state on a particular cpu causes more confusion to the user as we cannot have different smt-snooze-delay (target residency) values for each cpu. In the current code, smt-snooze-delay functionality is completely broken. It makes sense to remove smt-snooze-delay from idle driver with the coming of cpuidle framework. However, sysfs files are retained as ppc64_util currently utilises it. Once we fix ppc64_util, propose to clean up the kernel code. Signed-off-by: Deepthi Dharwar <deepthi@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-01-09powerpc/85xx: add sysfs for pw20 state and altivec idleWang Dongsheng1-0/+316
Add a sys interface to enable/diable pw20 state or altivec idle, and control the wait entry time. Enable/Disable interface: 0, disable. 1, enable. /sys/devices/system/cpu/cpuX/pw20_state /sys/devices/system/cpu/cpuX/altivec_idle Set wait time interface:(Nanosecond) /sys/devices/system/cpu/cpuX/pw20_wait_time /sys/devices/system/cpu/cpuX/altivec_idle_wait_time Example: Base on TBfreq is 41MHZ. 1~48(ns): TB[63] 49~97(ns): TB[62] 98~195(ns): TB[61] 196~390(ns): TB[60] 391~780(ns): TB[59] 781~1560(ns): TB[58] ... Signed-off-by: Wang Dongsheng <dongsheng.wang@freescale.com> [scottwood@freescale.com: change ifdef] Signed-off-by: Scott Wood <scottwood@freescale.com>
2013-12-02powerpc/kernel/sysfs: Cleanup set up macros for PMC/non-PMC SPRsMadhavan Srinivasan1-34/+38
Currently PMC (Performance Monitor Counter) setup macros are used for other SPRs. Since not all SPRs are PMC related, this patch modifies the exisiting macro and uses it to setup both PMC and non PMC SPRs accordingly. Signed-off-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com> Acked-by: Olof Johansson <olof@lixom.net> Acked-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-10-03powerpc/sysfs: Disable writing to PURR in guest modeMadhavan Srinivasan1-2/+16
arch/powerpc/kernel/sysfs.c exports PURR with write permission. This may be valid for kernel in phyp mode. But writing to the file in guest mode causes crash due to a priviledge violation Signed-off-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> CC: <stable@vger.kernel.org>
2013-07-01powerpc: Delete __cpuinit usage from all usersPaul Gortmaker1-3/+3
The __cpuinit type of throwaway sections might have made sense some time ago when RAM was more constrained, but now the savings do not offset the cost and complications. For example, the fix in commit 5e427ec2d0 ("x86: Fix bit corruption at CPU resume time") is a good example of the nasty type of bugs that can be created with improper use of the various __init prefixes. After a discussion on LKML[1] it was decided that cpuinit should go the way of devinit and be phased out. Once all the users are gone, we can then finally remove the macros themselves from linux/init.h. This removes all the powerpc uses of the __cpuinit macros. There are no __CPUINIT users in assembly files in powerpc. [1] https://lkml.org/lkml/2013/5/20/589 Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Josh Boyer <jwboyer@gmail.com> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Kumar Gala <galak@kernel.crashing.org> Cc: linuxppc-dev@lists.ozlabs.org Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-05-06powerpc/topology: Fix spurr attribute permissionBenjamin Herrenschmidt1-1/+1
We are registering the attribute with permission 0600 but it doesn't have a store callback, which causes WARN_ON's during boot. Fix the permission. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-12-11numa: convert static memory to dynamically allocated memory for per node deviceWen Congyang1-2/+2
We use a static array to store struct node. In many cases, we don't have too many nodes, and some memory will be unused. Convert it to per-device dynamically allocated memory. Signed-off-by: Wen Congyang <wency@cn.fujitsu.com> Cc: David Rientjes <rientjes@google.com> Cc: Jiang Liu <liuj97@gmail.com> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-10-18cpuidle/powerpc: Fix smt_snooze_delay functionality.Deepthi Dharwar1-1/+1
smt_snooze_delay was designed to delay idle loop's nap entry in the native idle code before it got ported over to use as part of the cpuidle framework. A -ve value assigned to smt_snooze_delay should result in busy looping, in other words disabling the entry to nap state. - https://lists.ozlabs.org/pipermail/linuxppc-dev/2010-May/082450.html This particular functionality can be achieved currently by echo 1 > /sys/devices/system/cpu/cpu*/state1/disable but it is broken when one assigns -ve value to the smt_snooze_delay variable either via sysfs entry or ppc64_cpu util. This patch aims to fix this, by disabling nap state when smt_snooze_delay variable is set to -ve value. Signed-off-by: Deepthi Dharwar <deepthi@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-09-05powerpc: Keep thread.dscr and thread.dscr_inherit in syncAnton Blanchard1-1/+3
When we update the DSCR either via emulation of mtspr(DSCR) or via a change to dscr_default in sysfs we don't update thread.dscr. We will eventually update it at context switch time but there is a period where thread.dscr is incorrect. If we fork at this point we will copy the old value of thread.dscr into the child. To avoid this, always keep thread.dscr in sync with reality. This issue was found with the following testcase: http://ozlabs.org/~anton/junkcode/dscr_inherit_test.c Signed-off-by: Anton Blanchard <anton@samba.org> Cc: <stable@kernel.org> # 3.0+ Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-09-05powerpc: Update DSCR on all CPUs when writing sysfs dscr_defaultAnton Blanchard1-0/+8
Writing to dscr_default in sysfs doesn't actually change the DSCR - we rely on a context switch on each CPU to do the work. There is no guarantee we will get a context switch in a reasonable amount of time so fire off an IPI to force an immediate change. This issue was found with the following test case: http://ozlabs.org/~anton/junkcode/dscr_explicit_test.c Signed-off-by: Anton Blanchard <anton@samba.org> Cc: <stable@kernel.org> # 3.0+ Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-03-28Disintegrate asm/system.h for PowerPCDavid Howells1-1/+0
Disintegrate asm/system.h for PowerPC. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> cc: linuxppc-dev@lists.ozlabs.org
2012-03-21powerpc: Remove FW_FEATURE ISERIES from arch codeStephen Rothwell1-5/+2
This is no longer selectable, so just remove all the dependent code. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-01-07Merge branch 'driver-core-next' of ↵Linus Torvalds1-134/+133
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core * 'driver-core-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (73 commits) arm: fix up some samsung merge sysdev conversion problems firmware: Fix an oops on reading fw_priv->fw in sysfs loading file Drivers:hv: Fix a bug in vmbus_driver_unregister() driver core: remove __must_check from device_create_file debugfs: add missing #ifdef HAS_IOMEM arm: time.h: remove device.h #include driver-core: remove sysdev.h usage. clockevents: remove sysdev.h arm: convert sysdev_class to a regular subsystem arm: leds: convert sysdev_class to a regular subsystem kobject: remove kset_find_obj_hinted() m86k: gpio - convert sysdev_class to a regular subsystem mips: txx9_sram - convert sysdev_class to a regular subsystem mips: 7segled - convert sysdev_class to a regular subsystem sh: dma - convert sysdev_class to a regular subsystem sh: intc - convert sysdev_class to a regular subsystem power: suspend - convert sysdev_class to a regular subsystem power: qe_ic - convert sysdev_class to a regular subsystem power: cmm - convert sysdev_class to a regular subsystem s390: time - convert sysdev_class to a regular subsystem ... Fix up conflicts with 'struct sysdev' removal from various platform drivers that got changed: - arch/arm/mach-exynos/cpu.c - arch/arm/mach-exynos/irq-eint.c - arch/arm/mach-s3c64xx/common.c - arch/arm/mach-s3c64xx/cpu.c - arch/arm/mach-s5p64x0/cpu.c - arch/arm/mach-s5pv210/common.c - arch/arm/plat-samsung/include/plat/cpu.h - arch/powerpc/kernel/sysfs.c and fix up cpu_is_hotpluggable() as per Greg in include/linux/cpu.h
2011-12-21convert 'memory' sysdev_class to a regular subsystemKay Sievers1-2/+2
This moves the 'memory sysdev_class' over to a regular 'memory' subsystem and converts the devices to regular devices. The sysdev drivers are implemented as subsystem interfaces now. After all sysdev classes are ported to regular driver core entities, the sysdev implementation will be entirely removed from the kernel. Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-12-21cpu: convert 'cpu' and 'machinecheck' sysdev_class to a regular subsystemKay Sievers1-129/+128
This moves the 'cpu sysdev_class' over to a regular 'cpu' subsystem and converts the devices to regular devices. The sysdev drivers are implemented as subsystem interfaces now. After all sysdev classes are ported to regular driver core entities, the sysdev implementation will be entirely removed from the kernel. Userspace relies on events and generic sysfs subsystem infrastructure from sysdev devices, which are made available with this conversion. Cc: Haavard Skinnemoen <hskinnemoen@gmail.com> Cc: Hans-Christian Egtvedt <egtvedt@samfundet.no> Cc: Tony Luck <tony.luck@intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Borislav Petkov <bp@amd64.org> Cc: Tigran Aivazian <tigran@aivazian.fsnet.co.uk> Cc: Len Brown <lenb@kernel.org> Cc: Zhang Rui <rui.zhang@intel.com> Cc: Dave Jones <davej@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: "Srivatsa S. Bhat" <srivatsa.bhat@linux.vnet.ibm.com> Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-12-08powerpc/cpuidle: cpuidle driver for pSeriesDeepthi Dharwar1-0/+2
This patch implements a back-end cpuidle driver for pSeries based on pseries_dedicated_idle_loop and pseries_shared_idle_loop routines. The driver is built only if CONFIG_CPU_IDLE is set. This cpuidle driver uses global registration of idle states and not per-cpu. Signed-off-by: Deepthi Dharwar <deepthi@linux.vnet.ibm.com> Signed-off-by: Trinabh Gupta <g.trinabh@gmail.com> Signed-off-by: Arun R Bharadwaj <arun.r.bharadwaj@gmail.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-11-25powerpc: Export PIR data through sysfsAnanth N Mavinakayanahalli1-0/+8
On Fri, Nov 11, 2011 at 10:17:55AM +0530, Ananth N Mavinakayanahalli wrote: > > > > At this rate we're going to end up with no bits left for CPU features > > way too quickly... Especially for something we only care about once at > > boot time. > > > > Wouldn't CPU_FTR_PPCAS_ARCH_V2 be a good enough test ? > > /me checks Cell manuals... yes, that test would be good enough. I will > cook up a patch to use this. Here it is... Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-10-31powerpc: various straight conversions from module.h --> export.hPaul Gortmaker1-1/+1
All these files were including module.h just for the basic EXPORT_SYMBOL infrastructure. We can shift them off to the export.h header which is a way smaller footprint and thus realize some compile time gains. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-04-27powerpc: Per process DSCR + some fixes (try#4)Alexey Kardashevskiy1-0/+38
The DSCR (aka Data Stream Control Register) is supported on some server PowerPC chips and allow some control over the prefetch of data streams. This patch allows the value to be specified per thread by emulating the corresponding mfspr and mtspr instructions. Children of such threads inherit the value. Other threads use a default value that can be specified in sysfs - /sys/devices/system/cpu/dscr_default. If a thread starts with non default value in the sysfs entry, all children threads inherit this non default value even if the sysfs value is changed later. Signed-off-by: Alexey Kardashevskiy <aik@au1.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-05-21powerpc: Use smt_snooze_delay=-1 to always busy loopAnton Blanchard1-9/+8
Right now if we want to busy loop and not give up any time to the hypervisor we put a very large value into smt_snooze_delay. This is sometimes useful when running a single partition and you want to avoid any latencies due to the hypervisor or CPU power state transitions. While this works, it's a bit ugly - how big a number is enough now we have NO_HZ and can be idle for a very long time. The patch below makes smt_snooze_delay signed, and a negative value means loop forever: echo -1 > /sys/devices/system/cpu/cpu0/smt_snooze_delay This change shouldn't affect the existing userspace tools (eg ppc64_cpu), but I'm cc-ing Nathan just to be sure. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-05-21powerpc: Remove check of ibm,smt-snooze-delay OF propertyAnton Blanchard1-29/+0
I'm not sure why we have code for parsing an ibm,smt-snooze-delay OF property. Since we have a smt-snooze-delay= boot option and we can also set it at runtime via sysfs, it should be safe to get rid of this code. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-12-09sysfs/cpu: Add probe/release filesNathan Fontenot1-0/+19
Version 3 of this patch is updated with documentation added to Documentation/ABI. There are no changes to any of the C code from v2 of the patch. In order to support kernel DLPAR of CPU resources we need to provide an interface to add (probe) and remove (release) the resource from the system. This patch Creates new generic probe and release sysfs files to facilitate cpu probe/release. The probe/release interface provides for allowing each arch to supply their own routines for implementing the backend of adding and removing cpus to/from the system. This also creates the powerpc specific stubs to handle the arch callouts from writes to the sysfs files. The creation and use of these files is regulated by the CONFIG_ARCH_CPU_PROBE_RELEASE option so that only architectures that need the capability will have the files created. Signed-off-by: Nathan Fontenot <nfont@austin.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-09-11powerpc: Fix bug where perf_counters breaks oprofilePaul Mackerras1-0/+3
Currently there is a bug where if you use oprofile on a pSeries machine, then use perf_counters, then use oprofile again, oprofile will not work correctly; it will lose the PMU configuration the next time the hypervisor does a partition context switch, and thereafter won't count anything. Maynard Johnson identified the sequence causing the problem: - oprofile setup calls ppc_enable_pmcs(), which calls pseries_lpar_enable_pmcs, which tells the hypervisor that we want to use the PMU, and sets the "PMU in use" flag in the lppaca. This flag tells the hypervisor whether it needs to save and restore the PMU config. - The perf_counter code sets and clears the "PMU in use" flag directly as it context-switches the PMU between tasks, and leaves it clear when it finishes. - oprofile setup, called for a new oprofile run, calls ppc_enable_pmcs, which does nothing because it has already been called. In particular it doesn't set the "PMU in use" flag. This fixes the problem by arranging for ppc_enable_pmcs to always set the "PMU in use" flag. It makes the perf_counter code call ppc_enable_pmcs also rather than calling the lower-level function directly, and removes the setting of the "PMU in use" flag from pseries_lpar_enable_pmcs, since that is now done in its caller. This also removes the declaration of pasemi_enable_pmcs because it isn't defined anywhere. Reported-by: Maynard Johnson <mpjohn@us.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org> Cc: <stable@kernel.org) Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-03-27powerpc: Fix bugs introduced by sysfs changesBenjamin Herrenschmidt1-4/+2
Rusty's patch to change our sysfs access to various registers to use smp_call_function_single() introduced a whole bunch of warnings. This fixes them. This version also fixes an actual bug in here where it did mtspr instead of mfspr when reading the files Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-03-24powerpc: Make sysfs code use smp_call_function_singleRusty Russell1-25/+6
Impact: performance improvement This fixes 'powerpc: avoid cpumask games in arch/powerpc/kernel/sysfs.c' which talked about using smp_call_function_single, but actually used work_on_cpu (an older version of the patch). Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-01-08powerpc: Rewrite sysfs processor cache info codeNathan Lynch1-296/+4
The current code for providing processor cache information in sysfs has the following deficiencies: - several complex functions that are hard to understand - implicit recursion (cache_desc_release -> kobject_put -> cache_desc_release) - explicit recursion (create_cache_index_info) - use of two per-cpu arrays when one would suffice - duplication of work on systems where CPUs share cache Also, when I looked at implementing support for a shared_cpu_map attribute, it was pretty much impossible to handle hotplug without checking every single online CPU's cache_desc list and fixing things up... not that this is a hot path, but it would have introduced O(n^2)-ish behavior during boot. Addressing this involved rethinking the core data structures used, which didn't lend itself to an incremental approach. This implementation maintains a "forest" (potentially more than one tree) of cache objects which reflects the system's cache topology. Cache objects are instantiated as needed as CPUs come online. A per-cpu array is used mainly for sysfs-related bookkeeping; the objects in the array just point to the appropriate points in the forest. This maintains compatibility with the existing code and includes some enhancements: - Implement the shared_cpu_map attribute, which is essential for enabling userspace to discover the system's overall cache topology. - Use cache-block-size properties if cache-line-size is not available. I chose to place this implementation in a new file since it would have roughly doubled the size of sysfs.c, which is already kind of messy. Signed-off-by: Nathan Lynch <ntl@pobox.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2008-12-21powerpc: Convert sysfs cache code to of_find_next_cache_node()Nathan Lynch1-6/+1
Using the common code means that more complete cache information will provided in sysfs on platforms that don't use the l2-cache property convention. Signed-off-by: Nathan Lynch <ntl@pobox.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-01powerpc: Fix build for 32-bit SMP configsMilton Miller1-0/+2
attr_smt_snooze_delay is only defined for CONFIG_PPC64, so protect the attribute removal with the same condition. This fixes this build error on 32-bit SMP configurations: /data/home/miltonm/next.git/arch/powerpc/kernel/sysfs.c: In function ‘unregister_cpu_online’: /data/home/miltonm/next.git/arch/powerpc/kernel/sysfs.c:722: error: ‘attr_smt_snooze_delay’ undeclared (first use in this function) /data/home/miltonm/next.git/arch/powerpc/kernel/sysfs.c:722: error: (Each undeclared identifier is reported only once /data/home/miltonm/next.git/arch/powerpc/kernel/sysfs.c:722: error: for each function it appears in.) Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-09-18powerpc: Fix build warnings introduced by PMC support on 32-bitKumar Gala1-2/+4
arch/powerpc/kernel/sysfs.c:197:7: warning: "CONFIG_6xx" is not defined arch/powerpc/kernel/sysfs.c:141: warning: 'run_on_cpu' defined but not used Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-08-20powerpc: Expose PMCs & cache topology in sysfs on 32-bitBenjamin Herrenschmidt1-18/+88
The file arch/powerpc/kernel/sysfs.c is currently only compiled for 64-bit kernels. It contain code to register CPU sysdevs in sysfs and add various properties such as cache topology and raw access by root to performance monitor counters (PMCs). A lot of that can be re-used as is on 32-bits. This makes the file be built for both, with appropriate ifdef'ing for the few bits that are really 64-bit specific, and adds some support for the raw PMCs for 75x and 74xx processors. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-08-20powerpc: Remove redundant sysfs_remove_file calls for cache infoNathan Lynch1-9/+2
When removing a directory, the sysfs core takes care of removing files in the directory (see sysfs_remove_dir()). So when we are about to delete a kobject (and thus cause its sysfs directory to be removed), we don't have to explicitly remove the files attached to it, although it's harmless to do so. Signed-off-by: Nathan Lynch <ntl@pobox.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-07-28powerpc: Show processor cache information in sysfsNathan Lynch1-0/+309
Collect cache information from the OF device tree and display it in the cpu hierarchy in sysfs. This is intended to be compatible at the userspace level with x86's implementation[1], hence some of the funny attribute names. The arrangement of cache info is not immediately intuitive, but (again) it's for compatibility's sake. The cache attributes exposed are: type (Data, Instruction, or Unified) level (1, 2, 3...) size coherency_line_size number_of_sets ways_of_associativity All of these can be derived on platforms that follow the OF PowerPC Processor binding. The code "publishes" only those attributes for which it is able to determine values; attributes for values which cannot be determined are not created at all. [1] arch/x86/kernel/cpu/intel_cacheinfo.c BenH: Turned some printk's into pr_debug, added better NULL checking in a couple of places. Signed-off-by: Nathan Lynch <ntl@pobox.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2008-07-28powerpc: register_cpu_online should be __cpuinitNathan Lynch1-1/+1
It is called only in cpu online paths. (caught by CONFIG_DEBUG_SECTION_MISMATCH=y) Signed-off-by: Nathan Lynch <ntl@pobox.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2008-07-25powerpc: Fallout from sysdev API changesStephen Rothwell1-1/+2
A struct sysdev_attribute * parameter was added to the show routine by commit 4a0b2b4dbe1335b8b9886ba3dc85a145d5d938ed "sysdev: Pass the attribute to the low level sysdev show/store function". This eliminates a warning: arch/powerpc/kernel/sysfs.c:538: warning: initialization from incompatible pointer type Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2008-07-21sysdev: Pass the attribute to the low level sysdev show/store functionAndi Kleen1-4/+11
This allow to dynamically generate attributes and share show/store functions between attributes. Right now most attributes are generated by special macros and lots of duplicated code. With the attribute passed it's instead possible to attach some data to the attribute and then use that in shared low level functions to do different things. I need this for the dynamically generated bank attributes in the x86 machine check code, but it'll allow some further cleanups. I converted all users in tree to the new show/store prototype. It's a single huge patch to avoid unbisectable sections. Runtime tested: x86-32, x86-64 Compiled only: ia64, powerpc Not compile tested/only grep converted: sh, arm, avr32 Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-28remove __attribute_used__Adrian Bunk1-1/+1
Remove the deprecated __attribute_used__. [Introduce __section in a few places to silence checkpatch /sam] Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-09-14[POWERPC] Remove warning in arch/powerpc/kernel/sysfs.cOlof Johansson1-1/+3
Fixes: arch/powerpc/kernel/sysfs.c: In function 'cpu_add_sysdev_attr_group': arch/powerpc/kernel/sysfs.c:388: warning: ignoring return value of 'sysfs_create_group', declared with attribute warn_unused_result Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-09-14[POWERPC] pasemi: Export more SPRs to sysfs when CONFIG_DEBUG_KERNEL=yOlof Johansson1-0/+60
Export some of the implementation-specific registers via sysfs. Useful when debugging, etc. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-07-10[POWERPC] arch/powerpc/kernel/sysfs.c: Move NUMA exportsJohannes Berg1-3/+2
With !CONFIG_NUMA, these are static inlines in the header file so don't generate exports for them in that case. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-09Add suspend-related notifications for CPU hotplugRafael J. Wysocki1-0/+2
Since nonboot CPUs are now disabled after tasks and devices have been frozen and the CPU hotplug infrastructure is used for this purpose, we need special CPU hotplug notifications that will help the CPU-hotplug-aware subsystems distinguish normal CPU hotplug events from CPU hotplug events related to a system-wide suspend or resume operation in progress. This patch introduces such notifications and causes them to be used during suspend and resume transitions. It also changes all of the CPU-hotplug-aware subsystems to take these notifications into consideration (for now they are handled in the same way as the corresponding "normal" ones). [oleg@tv-sign.ru: cleanups] Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Cc: Gautham R Shenoy <ego@in.ibm.com> Cc: Pavel Machek <pavel@ucw.cz> Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-07[POWERPC] Change topology_init() to a subsys_initcallKevin Corry1-1/+1
Change the powerpc version of topology_init() from an __initcall to a subsys_initcall to match all other architectures. Signed-off-by: Kevin Corry <kevcorry@us.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-24[POWERPC] Remove old interface find_path_deviceStephen Rothwell1-1/+2
Replaced by of_find_node_by_path. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-24[POWERPC] pasemi: PA6T oprofile supportOlof Johansson1-6/+6
Oprofile support for PA6T, kernel side. Also rename the PA6T_SPRN.* defines to SPRN_PA6T.*. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-13[POWERPC] Rename get_property to of_get_property: arch/powerpcStephen Rothwell1-1/+1
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-07[POWERPC] PA6T PMC supportOlof Johansson1-49/+92
Support for PA6T-style PMC registers. PMCs are completely implementation-dependent on PPC, and PA6T numbers them differently from the IBM model. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-12-09[POWERPC] Add SPURR SPR to sysfsAnton Blanchard1-0/+8
Now we have a SPURR cpu feature bit, we can export it to userspace in sysfs. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-12-09[POWERPC] Add DSCR SPR to sysfsAnton Blanchard1-0/+8
POWER6 adds a new SPR, the data stream control register (DSCR). It can be used to adjust how agressive the prefetch mechanisms are. Its possible we may want to context switch this, but for now just export it to userspace via sysfs so we can adjust it. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Paul Mackerras <paulus@samba.org>