summaryrefslogtreecommitdiffstats
path: root/arch/powerpc/kernel/ppc_ksyms.c
AgeCommit message (Collapse)AuthorFilesLines
2014-04-30powerpc: memcpy optimization for 64bit LEPhilippe Bergheaud1-2/+0
Unaligned stores take alignment exceptions on POWER7 running in little-endian. This is a dumb little-endian base memcpy that prevents unaligned stores. Once booted the feature fixup code switches over to the VMX copy loops (which are already endian safe). The question is what we do before that switch over. The base 64bit memcpy takes alignment exceptions on POWER7 so we can't use it as is. Fixing the causes of alignment exception would slow it down, because we'd need to ensure all loads and stores are aligned either through rotate tricks or bytewise loads and stores. Either would be bad for all other 64bit platforms. [ I simplified the loop a bit - Anton ] Signed-off-by: Philippe Bergheaud <felix@linux.vnet.ibm.com> Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-04-28powerpc: Export flush_icache_rangeJeff Mahoney1-0/+1
Commit aac416fc38c (lkdtm: flush icache and report actions) calls flush_icache_range from a module. It's exported on most architectures that implement it, but not on powerpc. This patch exports it to fix the module link failure. Signed-off-by: Jeff Mahoney <jeffm@suse.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-10-11Merge branch 'for-kvm' into nextBenjamin Herrenschmidt1-0/+4
Topic branch for commits that the KVM tree might want to pull in separately. Hand merged a few files due to conflicts with the LE stuff Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-10-11powerpc: Provide for giveup_fpu/altivec to save state in alternate locationPaul Mackerras1-0/+4
This provides a facility which is intended for use by KVM, where the contents of the FP/VSX and VMX (Altivec) registers can be saved away to somewhere other than the thread_struct when kernel code wants to use floating point or VMX instructions. This is done by providing a pointer in the thread_struct to indicate where the state should be saved to. The giveup_fpu() and giveup_altivec() functions test these pointers and save state to the indicated location if they are non-NULL. Note that the MSR_FP/VEC bits in task->thread.regs->msr are still used to indicate whether the CPU register state is live, even when an alternate save location is being used. This also provides load_fp_state() and load_vr_state() functions, which load up FP/VSX and VMX state from memory into the CPU registers, and corresponding store_fp_state() and store_vr_state() functions, which store FP/VSX and VMX state into memory from the CPU registers. Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-10-11powerpc: Added __cmpdi2 for signed 64bit comparisionBharat Bhushan1-0/+2
This was missing on powerpc and I am getting compilation error drivers/vfio/pci/vfio_pci_rdwr.c:193: undefined reference to `__cmpdi2' drivers/vfio/pci/vfio_pci_rdwr.c:193: undefined reference to `__cmpdi2' Signed-off-by: Bharat Bhushan <bharat.bhushan@freescale.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-10-11powerpc: Use generic memcpy code in little endianAnton Blanchard1-0/+2
We need to fix some endian issues in our memcpy code. For now just enable the generic memcpy routine for little endian builds. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-10-11powerpc: Use generic checksum code in little endianAnton Blanchard1-0/+2
We need to fix some endian issues in our checksum code. For now just enable the generic checksum routines for little endian builds. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-08-14powerpc: Remove the empty giveup_fpu() function on 32bit kernelKevin Hao1-0/+2
Instead of implementing an empty giveup_fpu() function for each 32bit processor type, replace them with an unique empty inline function. Signed-off-by: Kevin Hao <haokexin@gmail.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-08-14powerpc: Remove the symbol __flush_icache_rangeKevin Hao1-1/+0
And now the function flush_icache_range() is just a wrapper which only invoke the function __flush_icache_range() directly. So we don't have reason to keep it anymore. Signed-off-by: Kevin Hao <haokexin@gmail.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-05-14powerpc: Provide __bswapdi2David Woodhouse1-1/+2
Some versions of GCC apparently expect this to be provided by libgcc. Updates from Mikey to fix 32 bit version and adding "r" to registers. Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-10-29Merge remote-tracking branch 'master' into queueMarcelo Tosatti1-1/+0
Merge reason: development work has dependency on kvm patches merged upstream. Conflicts: arch/powerpc/include/asm/Kbuild arch/powerpc/include/asm/kvm_para.h Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2012-10-05powerpc/epapr: export epapr_hypercall_startScott Wood1-0/+5
This fixes breakage introduced by the following commit: commit 6d2d82627f4f1e96a33664ace494fa363e0495cb Author: Liu Yu-B13201 <Yu.Liu@freescale.com> Date: Tue Jul 3 05:48:56 2012 +0000 PPC: Don't use hardcoded opcode for ePAPR hcall invocation when a driver that uses ePAPR hypercalls is built as a module. Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2012-09-30powerpc: split ret_from_forkAl Viro1-1/+0
... and get rid of in-kernel syscalls in kernel_thread() Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-05-27powerpc: Use the new generic strncpy_from_user() and strnlen_user()Paul Mackerras1-2/+0
This is much the same as for SPARC except that we can do the find_zero() function more efficiently using the count-leading-zeroes instructions. Tested on 32-bit and 64-bit PowerPC. Signed-off-by: Paul Mackerras <paulus@samba.org> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-06kvm/powerpc: Add new ioctl to retreive server MMU infosBenjamin Herrenschmidt1-0/+4
This is necessary for qemu to be able to pass the right information to the guest, such as the supported page sizes and corresponding encodings in the SLB and hash table, which can vary depending on the processor type, the type of KVM used (PR vs HV) and the version of KVM Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [agraf: fix compilation on hv, adjust for newer ioctl numbers] Signed-off-by: Alexander Graf <agraf@suse.de>
2012-03-28Disintegrate asm/system.h for PowerPCDavid Howells1-1/+1
Disintegrate asm/system.h for PowerPC. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> cc: linuxppc-dev@lists.ozlabs.org
2011-10-31powerpc: various straight conversions from module.h --> export.hPaul Gortmaker1-1/+1
All these files were including module.h just for the basic EXPORT_SYMBOL infrastructure. We can shift them off to the export.h header which is a way smaller footprint and thus realize some compile time gains. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-07-26atomic: use <linux/atomic.h>Arun Sharma1-1/+1
This allows us to move duplicated code in <asm/atomic.h> (atomic_inc_not_zero() for now) to <linux/atomic.h> Signed-off-by: Arun Sharma <asharma@fb.com> Reviewed-by: Eric Dumazet <eric.dumazet@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: David Miller <davem@davemloft.net> Cc: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-19powerpc: Simplify 4k/64k copy_page logicAnton Blanchard1-4/+1
To make it easier to add optimised versions of copy_page, remove the 4kB loop for 64kB pages and just do all the work in copy_page. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-11-29powerpc: Add support for popcnt instructionsAnton Blanchard1-0/+7
POWER5 added popcntb, and POWER7 added popcntw and popcntd. As a first step this patch does all the work out of line, but it would be nice to implement them as inlines with an out of line fallback. The performance issue with hweight was noticed when disabling SMT on a large (192 thread) POWER7 box. The patch improves that testcase by about 8%. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-08-01KVM: PPC: elide struct thread_struct instances from stackAndreas Schwab1-4/+0
Instead of instantiating a whole thread_struct on the stack use only the required parts of it. Signed-off-by: Andreas Schwab <schwab@linux-m68k.org> Tested-by: Alexander Graf <agraf@suse.de> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-05-31powerpc: Don't export cvt_fd & _df when CONFIG_PPC_FPU is not setBenjamin Herrenschmidt1-1/+1
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-05-17KVM: PPC: Find HTAB ourselvesAlexander Graf1-5/+0
For KVM we need to find the location of the HTAB. We can either rely on internal data structures of the kernel or ask the hardware. Ben issued complaints about the internal data structure method, so let's switch it to our own inquiry of the HTAB. Now we're fully independend :-). CC: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-05-17KVM: PPC: Export MMU variablesAlexander Graf1-0/+5
Our shadow MMU code needs to know where the HTAB is located and how big it is. So we need some variables from the kernel exported to module space if KVM is built as a module. CC: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Alexander Graf <agraf@suse.de> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-05-17KVM: PPC: Don't export Book3S symbols on BookEAlexander Graf1-0/+2
Book3S knows how to convert floats to doubles and vice versa. BookE doesn't. So let's make sure we don't export them on BookE. This fixes a link error on BookE with CONFIG_KVM=y. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-04-25KVM: PPC: Add helpers to call FPU instructionsAlexander Graf1-0/+2
To emulate paired single instructions, we need to be able to call FPU operations from within the kernel. Since we don't want gcc to spill arbitrary FPU code everywhere, we tell it to use a soft fpu. Since we know we can really call the FPU in safe areas, let's also add some calls that we can later use to actually execute real world FPU operations on the host's FPU. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-03-01KVM: PPC: Export __giveup_vsxAlexander Graf1-0/+1
We need to explicitly only giveup VSX in KVM, so let's export that specific function to module space. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-11-24powerpc: do not export pci_alloc/free_consistentStephen Rothwell1-2/+0
Since they are static inline functions. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-10-30powerpc: Enable sparse irq_descs on powerpcMichael Ellerman1-1/+0
Defining CONFIG_SPARSE_IRQ enables generic code that gets rid of the static irq_desc array, and replaces it with an array of pointers to irq_descs. It also allows node local allocation of irq_descs, however we currently don't have the information available to do that, so we just allocate them on all on node 0. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-01-08powerpc: Export cacheable_memzero as its now used in a driverKumar Gala1-0/+1
The Freescale PowerPC specific gianfar driver (gig-e) uses cacheable_memzero for performance reasons we need to export the symbol to allow the driver to be built as a module. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2008-12-21powerpc/mm: Add SMP support to no-hash TLB handlingBenjamin Herrenschmidt1-6/+0
This commit moves the whole no-hash TLB handling out of line into a new tlb_nohash.c file, and implements some basic SMP support using IPIs and/or broadcast tlbivax instructions. Note that I'm using local invalidations for D->I cache coherency. At worst, if another processor is trying to execute the same and has the old entry in its TLB, it will just take a fault and re-do the TLB flush locally (it won't re-do the cache flush in any case). Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-21powerpc/mm: Split mmu_context handlingBenjamin Herrenschmidt1-2/+1
This splits the mmu_context handling between 32-bit hash based processors, 64-bit hash based processors and everybody else. This is preliminary work for adding SMP support for BookE processors. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-10-20ftrace: rename FTRACE to FUNCTION_TRACERSteven Rostedt1-1/+1
Due to confusion between the ftrace infrastructure and the gcc profiling tracer "ftrace", this patch renames the config options from FTRACE to FUNCTION_TRACER. The other two names that are offspring from FTRACE DYNAMIC_FTRACE and FTRACE_MCOUNT_RECORD will stay the same. This patch was generated mostly by script, and partially by hand. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-24powerpc: Introduce local (non-broadcast) forms of tlb invalidatesKumar Gala1-0/+3
Introduced a new set of low level tlb invalidate functions that do not broadcast invalidates on the bus: _tlbil_all - invalidate all _tlbil_pid - invalidate based on process id (or mm context) _tlbil_va - invalidate based on virtual address (ea + pid) On non-SMP configs _tlbil_all should be functionally equivalent to _tlbia and _tlbil_va should be functionally equivalent to _tlbie. The intent of this change is to handle SMP based invalidates via IPIs instead of broadcasts as the mechanism scales better for larger number of cores. On e500 (fsl-booke mmu) based cores move to using MMUCSR for invalidate alls and tlbsx/tlbwe for invalidate virtual address. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-07-15Merge commit '85082fd7cbe3173198aac0eb5e85ab1edcc6352c' into test-buildBenjamin Herrenschmidt1-0/+5
Manual fixup of: arch/powerpc/Kconfig
2008-07-01powerpc: Add VSX context save/restore, ptrace and signal supportMichael Neuling1-0/+3
This patch extends the floating point save and restore code to use the VSX load/stores when VSX is available. This will make FP context save/restore marginally slower on FP only code, when VSX is available, as it has to load/store 128bits rather than just 64bits. Mixing FP, VMX and VSX code will get constant architected state. The signals interface is extended to enable access to VSR 0-31 doubleword 1 after discussions with tool chain maintainers. Backward compatibility is maintained. The ptrace interface is also extended to allow access to VSR 0-31 full registers. Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-06-23Merge branch 'linus' into tracing/ftraceIngo Molnar1-2/+0
2008-06-16[POWERPC] Remove ppc32's export of console_driversStephen Rothwell1-2/+0
There are no in-tree uses of the export any more and in linux-next there is a change that exports it globally which causes warnings: WARNING: vmlinux: 'console_drivers' exported twice. Previous export was in vmlinux and in one case (mpc85xx_defconfig) a build error: kernel/built-in.o: In function `__crc_console_drivers': (*ABS*+0x1eb0e6f5): multiple definition of `__crc_console_drivers' So remove the export now. Also, there is no longer any need to include linux/console.h. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-05-26ftrace: powerpc clean upsSteven Rostedt1-0/+5
This patch cleans up the ftrace code in PowerPC based on the comments from Michael Ellerman. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Cc: Michael Ellerman <michael@ellerman.id.au> Cc: proski@gnu.org Cc: a.p.zijlstra@chello.nl Cc: Pekka Paalanen <pq@iki.fi> Cc: Steven Rostedt <srostedt@redhat.com> Cc: linuxppc-dev@ozlabs.org Cc: Soeren Sandmann Pedersen <sandmann@redhat.com> Cc: paulus@samba.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-04-30Basic braille screen reader supportSamuel Thibault1-3/+0
This adds a minimalistic braille screen reader support. This is meant to be used by blind people e.g. on boot failures or when / cannot be mounted etc and thus the userland screen readers can not work. [akpm@linux-foundation.org: fix exports] Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org> Cc: Jiri Kosina <jikos@jikos.cz> Cc: Dmitry Torokhov <dtor@mail.ru> Acked-by: Alan Cox <alan@redhat.com> Cc: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-21Merge branch 'master' of ↵Linus Torvalds1-5/+2
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc * 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (202 commits) [POWERPC] Fix compile breakage for 64-bit UP configs [POWERPC] Define copy_siginfo_from_user32 [POWERPC] Add compat handler for PTRACE_GETSIGINFO [POWERPC] i2c: Fix build breakage introduced by OF helpers [POWERPC] Optimize fls64() on 64-bit processors [POWERPC] irqtrace support for 64-bit powerpc [POWERPC] Stacktrace support for lockdep [POWERPC] Move stackframe definitions to common header [POWERPC] Fix device-tree locking vs. interrupts [POWERPC] Make pci_bus_to_host()'s struct pci_bus * argument const [POWERPC] Remove unused __max_memory variable [POWERPC] Simplify xics direct/lpar irq_host setup [POWERPC] Use pseries_setup_i8259_cascade() in pseries_mpic_init_IRQ() [POWERPC] Turn xics_setup_8259_cascade() into a generic pseries_setup_i8259_cascade() [POWERPC] Move xics_setup_8259_cascade() into platforms/pseries/setup.c [POWERPC] Use asm-generic/bitops/find.h in bitops.h [POWERPC] 83xx: mpc8315 - fix USB UTMI Host setup [POWERPC] 85xx: Fix the size of qe muram for MPC8568E [POWERPC] 86xx: mpc86xx_hpcn - Temporarily accept old dts node identifier. [POWERPC] 86xx: mark functions static, other minor cleanups ...
2008-04-18[POWERPC] irqtrace support for 64-bit powerpcBenjamin Herrenschmidt1-4/+0
This adds the low level irq tracing hooks to the powerpc architecture needed to enable full lockdep functionality. This is partly based on Johannes Berg's initial version. I removed the asm trampoline that isn't needed (thus improving performance) and modified all sorts of bits and pieces, reworking most of the assembly, etc... Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-04-17Generic semaphore implementationMatthew Wilcox1-1/+0
Semaphores are no longer performance-critical, so a generic C implementation is better for maintainability, debuggability and extensibility. Thanks to Peter Zijlstra for fixing the lockdep warning. Thanks to Harvey Harrison for pointing out that the unlikely() was unnecessary. Signed-off-by: Matthew Wilcox <willy@linux.intel.com> Acked-by: Ingo Molnar <mingo@elte.hu>
2008-04-07[POWERPC] Add hand-coded assembly strcmpSteven Rostedt1-0/+1
We have an assembly version of strncmp for the bootwrapper, but not for the kernel, so we end up using the C version in the kernel. This takes the strncmp code from the bootup and copies it to the kernel proper, adding two instructions so it copes correctly with len==0. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-03-26[POWERPC] Really export empty_zero_pageStephen Rothwell1-1/+1
It was being protected by CONFIG_PPC32, but we want to export it on 64-bit also. This moves it out of the ifdef. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-03-13[POWERPC] Export empty_zero_pageTheodore Ts'o1-0/+1
Once again, this time with feeling.... - Ted >From c91cfaabc17f8a53807a2f31f067a732e34a1550 Mon Sep 17 00:00:00 2001 From: Theodore Ts'o <tytso@mit.edu> Date: Wed, 12 Mar 2008 11:50:39 -0400 Subject: Export empty_zero_page The empty_zero_page symbol is exported by most other architectures (s390, ia64, x86, um), and an upcoming ext4 patch needs it because ZERO_PAGE() references empty_zero_page, and we need it to zero out an unitialized extents in ext4 files. Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-03-13[POWERPC] Add __ucmpdi2 for 64-bit comparisons in 32-bit kernelsPaul Mackerras1-0/+2
Some drivers (such as V4L2) have code that causes gcc to generate calls to __ucmpdi2 when compiling for 32-bit powerpc, which results in either a link-time error or a module that can't be loaded, as we don't currently have a __ucmpdi2. This adds one so these drivers can be used. Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-01-25[POWERPC] Export copy_page() on 32bitJoseph Fannin1-0/+1
Export copy_page() on 32-bit powerpc; unionfs needs it. Unionfs already builds as a module on 64bit powerpc, so the export is placed within an existing CONFIG_PPC32 #ifdef. Signed-off-by: Joseph Fannin <jfannin@gmail.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-13[POWERPC] Kill non-existent symbols from ksyms and commproc.hJochen Friedrich1-12/+0
Remove exports of __res and cpm_install_handler/cpm_free_handler. Remove cpm_install_handler/cpm_free_handler from the commproc.h as well. Both were used for ARCH=ppc and aren't defined for ARCH=powerpc. CC arch/powerpc/kernel/ppc_ksyms.o arch/powerpc/kernel/ppc_ksyms.c:180: error: '__res' undeclared here (not in a function) arch/powerpc/kernel/ppc_ksyms.c:180: warning: type defaults to 'int' in declaration of '__res' make[1]: *** [arch/powerpc/kernel/ppc_ksyms.o] Error 1 make: *** [arch/powerpc/kernel] Error 2 LD .tmp_vmlinux1 arch/powerpc/kernel/built-in.o:(__ksymtab+0x198): undefined reference to `cpm_free_handler' arch/powerpc/kernel/built-in.o:(__ksymtab+0x1a0): undefined reference to `cpm_install_handler' make: *** [.tmp_vmlinux1] Error 1 Signed-off-by: Jochen Friedrich <jochen@scram.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Vitaly Bordug <vitb@kernel.crashing.org> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-09-22[POWERPC] Fix build errors when BLOCK=nEmil Medve1-5/+1
These are the symptom error messages: CC arch/powerpc/kernel/setup_32.o In file included from include/linux/blkdev.h:17, from include/linux/ide.h:13, from arch/powerpc/kernel/setup_32.c:13: include/linux/bsg.h:67: warning: 'struct request_queue' declared inside parameter list include/linux/bsg.h:67: warning: its scope is only this definition or declaration, which is probably not what you want include/linux/bsg.h:71: warning: 'struct request_queue' declared inside parameter list In file included from arch/powerpc/kernel/setup_32.c:13: include/linux/ide.h:857: error: field 'wrq' has incomplete type CC arch/powerpc/kernel/ppc_ksyms.o In file included from include/linux/blkdev.h:17, from include/linux/ide.h:13, from arch/powerpc/kernel/ppc_ksyms.c:15: include/linux/bsg.h:67: warning: 'struct request_queue' declared inside parameter list include/linux/bsg.h:67: warning: its scope is only this definition or declaration, which is probably not what you want include/linux/bsg.h:71: warning: 'struct request_queue' declared inside parameter list In file included from arch/powerpc/kernel/ppc_ksyms.c:15: include/linux/ide.h:857: error: field 'wrq' has incomplete type The fix tries to use the smallest scope CONFIG_* symbols that will fix the build problem. In this case <linux/ide.h> needs to be included only if IDE=y or IDE=m were selected. Also, ppc_ide_md is needed only if BLK_DEV_IDE=y or BLK_DEV_IDE=m Moved the EXPORT_SYMBOL(ppc_ide_md) from ppc_ksysms.c next to its declaration in setup_32.c which made <linux/ide.h> not needed. With <linux/ide.h> gone from ppc_ksyms.c, <asm/cacheflush.h> is needed to address the following warnings and errors: CC arch/powerpc/kernel/ppc_ksyms.o arch/powerpc/kernel/ppc_ksyms.c:122: error: '__flush_icache_range' undeclared here (not in a function) arch/powerpc/kernel/ppc_ksyms.c:122: warning: type defaults to 'int' in declaration of '__flush_icache_range' arch/powerpc/kernel/ppc_ksyms.c:123: error: 'flush_dcache_range' undeclared here (not in a function) arch/powerpc/kernel/ppc_ksyms.c:123: warning: type defaults to 'int' in declaration of 'flush_dcache_range' Signed-off-by: Emil Medve <Emilian.Medve@Freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-02 21:48:21 +0000