summaryrefslogtreecommitdiffstats
path: root/arch/powerpc/boot
AgeCommit message (Collapse)AuthorFilesLines
2008-02-06[POWERPC] 4xx: Add 440EPx Sequoia ehci dts entryValentine Barshak1-0/+8
Adds USB EHCI entry to PowerPC 440EPx Sequoia DTS. Signed-off-by: Valentine Barshak <vbarshak@ru.mvista.com> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2008-02-07[POWERPC] bootwrapper: Build multiple cuImagesGrant Likely3-49/+100
Currently, the kernel uses CONFIG_DEVICE_TREE to wrap a kernel image with a fdt blob which means for any given configuration only one dts file can be selected and so support for only one board can be built This moves the selection of the default .dts file out of the kernel config and into the bootwrapper makefile. The makefile chooses which images to build based on the kernel config and the dts source file name is taken directly from the image name. For example "cuImage.ebony" will use "ebony.dts" as the device tree source file. In addition, this patch allows a specific image to be requested from the command line by adding "cuImage.%" and "treeImage.%" targets to the list of valid built targets in arch/powerpc/Makefile. This allows the default dts selection to be overridden. Another advantage to this change is it allows a single defconfig to be supplied for all boards using the same chip family and only differing in the device tree. Important note: This patch adds two new zImage targets; zImage.dtb.% and zImage.dtb.initrd.% for zImages with embedded dtb files. Currently there are 5 platforms which require this: ps3, ep405, mpc885ads, ep88xc, adder875-redboot and ep8248e. This patch *changes the zImage filenames* for those platforms. ie. 'zImage.ps3' is now 'zImage.dtb.ps3'. This new zImage.dtb targets were added so that the .dts file could be part of the dependancies list for building them. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-02-07Merge branch 'for-2.6.25' of git://git.secretlab.ca/git/linux-2.6-mpc52xx ↵Paul Mackerras1-0/+122
into for-2.6.25
2008-02-06[POWERPC] mpc512x: Device tree for MPC5121 ADSJohn Rigby1-0/+122
Minimal /dts-v1/ device tree for mpc5121 ads. port-number property in uart nodes will go away after the driver learns to use aliases Signed-off-by: John Rigby <jrigby@freescale.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2008-02-05[POWERPC] 85xx: Add second cpu to 8572 dtsKumar Gala1-0/+12
The 8572 is a dual core processor, not reason not to describe both cores in the device tree. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-02-05[POWERPC] Fix storcenter DTS typos, feedback, IRQs.Jon Loeliger1-6/+6
Cleaned up IRQ layout and removed unsused ISU allocations. Fixed RTC address typo from /dts-v1/ conversion. Incorporated list suggestions to use an "iomega," vendor prefix, and to use a node reference rather than a hard path. Signed-off-by: Jon Loeliger <jdl@@jdl.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-02-05[POWERPC] 8xx: Add clock-frequency to adder875 and mpc885ads dtsBryan O'Donoghue3-0/+3
cpm_uart_core has a dependency on fsl,cpm-brg/clock-frequency, this means that a .dts that uses the cpm uart driver needs to supply a clock-frequency entry for get_brgfreq to return a meaningful number. Signed-off-by: Bryan O'Donoghue <bodonoghue@codehermit.ie> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-02-05[POWERPC] 83xx: Add rtc node to mpc8313erdb dtsKim Phillips1-0/+4
The 8313 rdb has a ds1339 at address 0x68. Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-02-05[POWERPC] 83xx: Correct 2nd PCI controller interrupt value in mpc834x_mds dtsKim Phillips1-1/+1
According to the 8349EA ref man, the second PCI PHB IRQ is 67. Thanks to Peter Van Ackeren for finding this. Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-02-05[POWERPC] 83xx: configure USB clock for MPC8315EKim Phillips1-1/+1
SCCR USB bits are in a different location on the mpc8315. Signed-off-by: Jerry Huang <Chang-Ming.Huang@freescale.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-31Merge branch 'linux-2.6'Paul Mackerras1-1/+1
2008-01-31Merge branch 'for-2.6.25' of git://git.secretlab.ca/git/linux-2.6-mpc52xxPaul Mackerras6-204/+160
2008-01-28remove __attribute_used__Adrian Bunk1-1/+1
Remove the deprecated __attribute_used__. [Introduce __section in a few places to silence checkpatch /sam] Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-01-28[POWERPC] 83xx: Clean up / convert mpc83xx board DTS files to v1 format.Paul Gortmaker15-985/+999
This patch converts the remaining 83xx boards to the dts-v1 format. This includes the mpc8313_rdb, mpc832x_mds, mpc8323_rdb, mpc8349emitx, mpc8349emitxgp and the mpc836x_mds. The mpc8315_rdb mpc834x_mds, mpc837[789]_*, and sbc8349 were already dts-v1 and only undergo minor changes for the sake of formatting consistency across the whole group of boards; i.e. the idea being that you can do a "diff -u board_A.dts board_B.dts" and see something meaningful. The general rule I've applied is that entries for values normally parsed by humans are left in decimal (i.e. IRQ, cache size, clock rates, basic counts and indexes) and all other data (i.e. reg and ranges, IRQ flags etc.) remain in hex. I've used dtc to confirm that the output prior to this changeset matches the output after this changeset is applied for all boards. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-28[POWERPC] 83xx: Fix typo in mpc837x compatible entriesKim Phillips3-3/+3
Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-28[POWERPC] QE: Explicitly set address-cells and size cells for muramPaul Gortmaker4-2/+10
Currently there are several dts that don't specify address or size cells for the muram. This causes dtc to use default values, one of which is an address-cells of two, and this breaks the parsing of the muram ranges, which is assuming an address-cells of one. For example: Warning (reg_format): "reg" property in /qe@e0100000/muram@10000/data-only@0 has invalid length (8 bytes) (#address-cells == 2, #size-cells == 1) Explicitly setting the address and size cells gets it parsed properly and gets rid of the four dtc warnings. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-28[POWERPC] Convert StorCenter DTS file to /dts-v1/ format.Jon Loeliger1-35/+38
Signed-off-by: Jon Loeliger <jdl@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-28[POWERPC] 86xx: Convert all 86xx DTS files to /dts-v1/ format.Jon Loeliger2-279/+281
Also fixed a few minor indent problems as well. Signed-off-by: Jon Loeliger <jdl@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-28[POWERPC] 83xx: add the mpc837[789]_rdb dts filesKim Phillips3-0/+888
Add the dts files for the MPC838xE Reference Development Board (RDB). The board is a mini-ITX reference board with 256M DDR2, 8M flash, 32M NAND, USB, PCI, gigabit ethernet, SATA, and serial. the difference among the three files is the 8377 has two, the 8378 none, and the 8379 has four sata controllers. partially based on the 8379 mds device trees. Signed-off-by: Joe D'Abbraccio <ljd015@freescale.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-28[POWERPC] 83xx: Add the MPC8315E RDB dtsKim Phillips1-0/+287
Add the dts for the MPC8315E Reference Development Board (RDB). The board is a mini-ITX reference board with 128M DDR2, 8M flash, 32M NAND, USB, PCI, gigabit ethernet, SATA, and serial. Signed-off-by: Jerry Huang <Chang-Ming.Huang@freescale.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-28[POWERPC] fsl_spi: stop using device_type = "spi"Anton Vorontsov12-28/+32
Also: - rename "fsl_spi" to "fsl,spi"; - add and use cell-index property, if found; - split probing code out of fsl_spi_init, thus we can call it for legacy device_type probing and new "compatible" probing. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-28ucc_geth: get rid of device_type for mdioAnton Vorontsov4-7/+4
device_type property is bogus, thus use proper compatible. Also change compatible property to "fsl,ucc-mdio". Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-28[POWERPC] QE: get rid of most device_types and modelAnton Vorontsov4-16/+23
Now we're searching for "fsl,qe", "fsl,qe-muram", "fsl,qe-muram-data" and "fsl,qe-ic". Unfortunately it's still impossible to remove device_type = "qe" from the existing device trees because older u-boots are looking for it. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-28[POWERPC] 85xx: some minor cleanups for stx_gp3 and tqm85xxKumar Gala5-5/+5
* "simple-bus" covers all our needs for of_platform_bus_probe() * make device tree name just 'soc' not 'soc85..' Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-28[POWERPC] 83xx: mpc834x_mds - Convert device tree source to dts-v1Paul Gortmaker1-125/+127
Move mpc834x_mds device tree source forward to dts-v1 format. Nothing too complex in this one, so it boils down to just adding a bunch of 0x in the right places and converting clock speeds to decimal. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-28[POWERPC] 83xx: Add device tree source for Wind River SBC834x board.Paul Gortmaker1-0/+243
This adds the device tree source for the Wind River SBC834x board. It is based on the MPC834x_MDS DTS, with the biggest difference being the lack of BCSR and the PCI2 that the MDS gets via the PIB. That, and this file is also dts-v1 format. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-28[POWERPC] 85xx: Add v1 device tree source for Wind River SBC8548 boardPaul Gortmaker1-0/+244
This adds a v1 device tree source for the Wind River SBC8548 board. The biggest difference between this and the MPC8548CDS reference platform is the absence of the CDS's Arcadia peripherals and physical access to the PCI#2 bus. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-28[POWERPC] 85xx: Add v1 device tree source for Wind River SBC8560 boardPaul Gortmaker1-0/+330
This adds a v1 device tree source for the Wind River SBC8560 board. The biggest difference between this and the MPC8560ADS reference platform dts is the use of an external 16550 compatible UART instead of the CPM2. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-27[POWERPC] 85xx: Port TQM85xx boards over from arch/ppcKumar Gala4-0/+905
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-27[POWERPC] 85xx: Port STX GP3 board over from arch/ppcKumar Gala1-0/+228
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-27[POWERPC] Add a cuboot wrapper for 85xx with CPM2Kumar Gala2-1/+70
The bd info struct changes if we have CPM2 enabled in u-boot. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-27[POWERPC] bootwrapper: Add find_node_by_compatibleKumar Gala2-0/+20
Add the ability to find a device node by just what its compatible with. This is useful in cases that we don't have a prop to find the node with. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-26[POWERPC] mpc5200: make dts files conform to generic names recommended practiceGrant Likely6-204/+150
Modify mpc5200 dts files to match Open Firmware's Generic Names recommended practice. Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2008-01-26[POWERPC] mpc5200: add #address-cells and #size-cells to soc node.Paul Gortmaker5-0/+10
The various 5200 dts files don't have values specified for the soc node, which in turn results in a warning from the processing of every child node (roughly 40 warnings per file). This explicitly sets the default values and gets rid of all the warnings. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2008-01-25[POWERPC] 4xx: logical/bitand typo in powerpc/boot/4xx.cRoel Kluin1-1/+1
logical/bitand typo Signed-off-by: Roel Kluin <12o3l@tiscali.nl> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2008-01-25[POWERPC] 4xx: PIKA Warp bootwrapperSean MacLennan2-1/+42
Add the cuboot wrapper for the PIKA Warp board Signed-off-by: Sean MacLennan <smaclennan@pikatech.com> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2008-01-25[POWERPC] 4xx: PIKA Warp DTSSean MacLennan1-0/+239
Add the device tree for the PIKA Warp board Signed-off-by: Sean MacLennan <smaclennan@pikatech.com> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2008-01-25[POWERPC] Enable RTC for Ebony and Walnut (v2)David Gibson2-4/+6
This patch extends the Ebony and Walnut platform code to instantiate the existing ds1742 RTC class driver for the DS1743 RTC/NVRAM chip found on both those boards. The patch uses a helper function to scan the device tree and instantiate the appropriate platform_device based on it, so it should be easy to extend for other boards which have mmio mapped RTC chips. Along with this, the device tree binding for the ds1743 chips is tweaked, based on the existing DS1385 OF binding found at: http://playground.sun.com/1275/proposals/Closed/Remanded/Accepted/346-it.txt Although that document covers the NVRAM portion of the chip, whereas here we're interested in the RTC portion, so it's not entirely clear if that's a good model. This implements only RTC class driver support - that is /dev/rtc0, not /dev/rtc, and the low-level get/set time callbacks remain unimplemented. That means in order to get at the clock you will either need a modified version of hwclock which will look at /dev/rtc0, or you'll need to configure udev to symlink rtc0 to rtc. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2008-01-25[POWERPC] 4xx: Add AMCC Haleakala (405EXr) dtsStefan Roese1-0/+274
The patch adds the Haleakala dts. The Haleakala is a stripped down version of the Kilauea (405EX) with only one EMAC and only one PCIe interface. Signed-off-by: Stefan Roese <sr@denx.de> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2008-01-24Merge branch 'for-2.6.25' of ↵Paul Mackerras28-34/+2094
master.kernel.org:/pub/scm/linux/kernel/git/galak/powerpc into for-2.6.25
2008-01-23[POWERPC] Add initial iomega StorCenter board port.Jon Loeliger2-1/+55
Use cuImage bootwrapper until U-Boot port is completed. Derived heavily from Linkstation port. Signed-off-by: Jon Loeliger <jdl@freescale.com> Acked-by: Andy Wilcox <andy@protium.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-23[POWERPC] Add StorCenter DTS first draft.Jon Loeliger1-0/+138
Based on the Kurobox DTS files. Signed-off-by: Jon Loeliger <jdl@freescale.com> Acked-by: Andy Wilcox <andy@protium.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-23[POWERPC] 86xx: Add localbus and flash nodes to mpc8641_hpcn.dtsWade Farnsworth1-0/+42
Add local bus, flash, and MTD partition nodes to mpc8641_hpcn.dts Also add compatible field for the soc node, so that it will be picked up by of_platform_bus_probe(). Signed-off-by: Wade Farnsworth <wfarnsworth@mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-23[POWERPC] 8xx: adder875 - Fix flash bus-width and remove duplicate __initdataScott Wood2-2/+2
Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-23[POWERPC] 83xx: MPC8313e RDB - Add NOR flash to the device tree.Scott Wood1-0/+9
Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-23[POWERPC] 83xx: MPC8313e RBD add NAND to device treeScott Wood1-0/+39
Add NAND to device tree, and call of_platform_bus_probe(). Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-23[POWERPC] 82xx: Embedded Planet EP8248E supportScott Wood4-2/+265
This board is also resold by Freescale under the names "QUICCStart MPC8248 Evaluation System" and "CWH-PPC-8248N-VE". Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-23[POWERPC] 8xx: Analogue & Micro Adder875 board support.Scott Wood7-2/+488
Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-23[POWERPC] Update MPC8610 HPCD to support audio driversTimur Tabi1-1/+112
Update the MPC8610 HPCD files to support the audio driver. Update booting-without-of.txt with information on the SSI device. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-23[POWERPC] QE: Add support for Freescale QUICCEngine UARTTimur Tabi1-0/+50
Add support for UART serial ports using a Freescale QUICCEngine. Update booting-without-of.txt to define new properties for a QE UART node. Update the MPC8323E-MDS device tree to add UCC5 as a UART. Update the QE library to support slow UCC devices and modules. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-18 19:59:25 +0000