summaryrefslogtreecommitdiffstats
path: root/arch/powerpc/boot
AgeCommit message (Collapse)AuthorFilesLines
2022-02-15powerpc/boot: Add `otheros-too-big.bld` to .gitignorePaul Menzel1-0/+1
Currently, `git status` lists the file as untracked by git, so tell git to ignore it. Fixes: aa3bc365ee73 ("powerpc/ps3: Add check for otheros image size") Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Acked-by: Geoff Levand <geoff@infradead.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220214065543.198992-1-pmenzel@molgen.mpg.de
2022-02-02powerpc: dts: t1040rdb: fix ports names for Seville Ethernet switchMaxim Kiselev2-4/+34
On board rev A, the network interface labels for the switch ports written on the front panel are different than on rev B and later. This patch fixes network interface names for the switch ports according to labels that are written on the front panel of the board rev B. They start from ETH3 and end at ETH10. This patch also introduces a separate device tree for rev A. The main device tree is supposed to cover rev B and later. Fixes: e69eb0824d8c ("powerpc: dts: t1040rdb: add ports for Seville Ethernet switch") Signed-off-by: Maxim Kiselev <bigunclemax@gmail.com> Reviewed-by: Maxim Kochetkov <fido_max@inbox.ru> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220121091447.3412907-1-bigunclemax@gmail.com
2022-01-31powerpc: dts: Fix some I2C unit addressesThierry Reding2-2/+2
The unit-address for the Maxim MAX1237 ADCs on XPedite5200 boards don't match the value in the "reg" property and cause a DTC warning. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20211220134036.683309-1-thierry.reding@gmail.com
2022-01-31powerpc: dts: t104xrdb: fix phy type for FMAN 4/5Maxim Kiselev1-2/+2
T1040RDB has two RTL8211E-VB phys which requires setting of internal delays for correct work. Changing the phy-connection-type property to `rgmii-id` will fix this issue. Signed-off-by: Maxim Kiselev <bigunclemax@gmail.com> Reviewed-by: Maxim Kochetkov <fido_max@inbox.ru> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20211230151123.1258321-1-bigunclemax@gmail.com
2022-01-21Merge tag 'rtc-5.17' of ↵Linus Torvalds1-0/+5
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux Pull RTC updates from Alexandre Belloni: "Two new drivers this cycle and a significant rework of the CMOS driver make the bulk of the changes. I also carry powerpc changes with the agreement of Michael. New drivers: - Sunplus SP7021 RTC - Nintendo GameCube, Wii and Wii U RTC Driver updates: - cmos: refactor UIP handling and presence check, fix century - rs5c372: offset correction support, report low voltage - rv8803: Epson RX8804 support" * tag 'rtc-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (33 commits) rtc: sunplus: fix return value in sp_rtc_probe() rtc: cmos: Evaluate century appropriate rtc: gamecube: Fix an IS_ERR() vs NULL check rtc: mc146818-lib: fix signedness bug in mc146818_get_time() dt-bindings: rtc: qcom-pm8xxx-rtc: update register numbers rtc: pxa: fix null pointer dereference rtc: ftrtc010: Use platform_get_irq() to get the interrupt rtc: Move variable into switch case statement rtc: pcf2127: Fix typo in comment dt-bindings: rtc: Add Sunplus RTC json-schema rtc: Add driver for RTC in Sunplus SP7021 rtc: rs5c372: fix incorrect oscillation value on r2221tl rtc: rs5c372: add offset correction support rtc: cmos: avoid UIP when writing alarm time rtc: cmos: avoid UIP when reading alarm time rtc: mc146818-lib: refactor mc146818_does_rtc_work rtc: mc146818-lib: refactor mc146818_get_time rtc: mc146818-lib: extract mc146818_avoid_UIP rtc: mc146818-lib: fix RTC presence check rtc: Check return value from mc146818_get_time() ...
2022-01-20Merge tag 'net-5.17-rc1' of ↵Linus Torvalds1-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Including fixes from netfilter, bpf. Quite a handful of old regression fixes but most of those are pre-5.16. Current release - regressions: - fix memory leaks in the skb free deferral scheme if upper layer protocols are used, i.e. in-kernel TCP readers like TLS Current release - new code bugs: - nf_tables: fix NULL check typo in _clone() functions - change the default to y for Vertexcom vendor Kconfig - a couple of fixes to incorrect uses of ref tracking - two fixes for constifying netdev->dev_addr Previous releases - regressions: - bpf: - various verifier fixes mainly around register offset handling when passed to helper functions - fix mount source displayed for bpffs (none -> bpffs) - bonding: - fix extraction of ports for connection hash calculation - fix bond_xmit_broadcast return value when some devices are down - phy: marvell: add Marvell specific PHY loopback - sch_api: don't skip qdisc attach on ingress, prevent ref leak - htb: restore minimal packet size handling in rate control - sfp: fix high power modules without diagnostic monitoring - mscc: ocelot: - don't let phylink re-enable TX PAUSE on the NPI port - don't dereference NULL pointers with shared tc filters - smsc95xx: correct reset handling for LAN9514 - cpsw: avoid alignment faults by taking NET_IP_ALIGN into account - phy: micrel: use kszphy_suspend/_resume for irq aware devices, avoid races with the interrupt Previous releases - always broken: - xdp: check prog type before updating BPF link - smc: resolve various races around abnormal connection termination - sit: allow encapsulated IPv6 traffic to be delivered locally - axienet: fix init/reset handling, add missing barriers, read the right status words, stop queues correctly - add missing dev_put() in sock_timestamping_bind_phc() Misc: - ipv4: prevent accidentally passing RTO_ONLINK to ip_route_output_key_hash() by sanitizing flags - ipv4: avoid quadratic behavior in netns dismantle - stmmac: dwmac-oxnas: add support for OX810SE - fsl: xgmac_mdio: add workaround for erratum A-009885" * tag 'net-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (92 commits) ipv4: add net_hash_mix() dispersion to fib_info_laddrhash keys ipv4: avoid quadratic behavior in netns dismantle net/fsl: xgmac_mdio: Fix incorrect iounmap when removing module powerpc/fsl/dts: Enable WA for erratum A-009885 on fman3l MDIO buses dt-bindings: net: Document fsl,erratum-a009885 net/fsl: xgmac_mdio: Add workaround for erratum A-009885 net: mscc: ocelot: fix using match before it is set net: phy: micrel: use kszphy_suspend()/kszphy_resume for irq aware devices net: cpsw: avoid alignment faults by taking NET_IP_ALIGN into account nfc: llcp: fix NULL error pointer dereference on sendmsg() after failed bind() net: axienet: increase default TX ring size to 128 net: axienet: fix for TX busy handling net: axienet: fix number of TX ring slots for available check net: axienet: Fix TX ring slot available check net: axienet: limit minimum TX ring size net: axienet: add missing memory barriers net: axienet: reset core on initialization prior to MDIO access net: axienet: Wait for PhyRstCmplt after core reset net: axienet: increase reset timeout bpf, selftests: Add ringbuf memory type confusion test ...
2022-01-19powerpc/fsl/dts: Enable WA for erratum A-009885 on fman3l MDIO busesTobias Waldekranz1-0/+2
This block is used in (at least) T1024 and T1040, including their variants like T1023 etc. Fixes: d55ad2967d89 ("powerpc/mpc85xx: Create dts components for the FSL QorIQ DPAA FMan") Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-01-19Merge tag 'kbuild-v5.17' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild updates from Masahiro Yamada: - Add new kconfig target 'make mod2noconfig', which will be useful to speed up the build and test iteration. - Raise the minimum supported version of LLVM to 11.0.0 - Refactor certs/Makefile - Change the format of include/config/auto.conf to stop double-quoting string type CONFIG options. - Fix ARCH=sh builds in dash - Separate compression macros for general purposes (cmd_bzip2 etc.) and the ones for decompressors (cmd_bzip2_with_size etc.) - Misc Makefile cleanups * tag 'kbuild-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (34 commits) kbuild: add cmd_file_size arch: decompressor: remove useless vmlinux.bin.all-y kbuild: rename cmd_{bzip2,lzma,lzo,lz4,xzkern,zstd22} kbuild: drop $(size_append) from cmd_zstd sh: rename suffix-y to suffix_y doc: kbuild: fix default in `imply` table microblaze: use built-in function to get CPU_{MAJOR,MINOR,REV} certs: move scripts/extract-cert to certs/ kbuild: do not quote string values in include/config/auto.conf kbuild: do not include include/config/auto.conf from shell scripts certs: simplify $(srctree)/ handling and remove config_filename macro kbuild: stop using config_filename in scripts/Makefile.modsign certs: remove misleading comments about GCC PR certs: refactor file cleaning certs: remove unneeded -I$(srctree) option for system_certificates.o certs: unify duplicated cmd_extract_certs and improve the log certs: use $< and $@ to simplify the key generation rule kbuild: remove headers_check stub kbuild: move headers_check.pl to usr/include/ certs: use if_changed to re-generate the key when the key type is changed ...
2022-01-14Merge tag 'powerpc-5.17-1' of ↵Linus Torvalds4-36/+18
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc updates from Michael Ellerman: - Optimise radix KVM guest entry/exit by 2x on Power9/Power10. - Allow firmware to tell us whether to disable the entry and uaccess flushes on Power10 or later CPUs. - Add BPF_PROBE_MEM support for 32 and 64-bit BPF jits. - Several fixes and improvements to our hard lockup watchdog. - Activate HAVE_DYNAMIC_FTRACE_WITH_REGS on 32-bit. - Allow building the 64-bit Book3S kernel without hash MMU support, ie. Radix only. - Add KUAP (SMAP) support for 40x, 44x, 8xx, Book3E (64-bit). - Add new encodings for perf_mem_data_src.mem_hops field, and use them on Power10. - A series of small performance improvements to 64-bit interrupt entry. - Several commits fixing issues when building with the clang integrated assembler. - Many other small features and fixes. Thanks to Alan Modra, Alexey Kardashevskiy, Ammar Faizi, Anders Roxell, Arnd Bergmann, Athira Rajeev, Cédric Le Goater, Christophe JAILLET, Christophe Leroy, Christoph Hellwig, Daniel Axtens, David Yang, Erhard Furtner, Fabiano Rosas, Greg Kroah-Hartman, Guo Ren, Hari Bathini, Jason Wang, Joel Stanley, Julia Lawall, Kajol Jain, Kees Cook, Laurent Dufour, Madhavan Srinivasan, Mark Brown, Minghao Chi, Nageswara R Sastry, Naresh Kamboju, Nathan Chancellor, Nathan Lynch, Nicholas Piggin, Nick Child, Oliver O'Halloran, Peiwei Hu, Randy Dunlap, Ravi Bangoria, Rob Herring, Russell Currey, Sachin Sant, Sean Christopherson, Segher Boessenkool, Thadeu Lima de Souza Cascardo, Tyrel Datwyler, Xiang wangx, and Yang Guang. * tag 'powerpc-5.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (240 commits) powerpc/xmon: Dump XIVE information for online-only processors. powerpc/opal: use default_groups in kobj_type powerpc/cacheinfo: use default_groups in kobj_type powerpc/sched: Remove unused TASK_SIZE_OF powerpc/xive: Add missing null check after calling kmalloc powerpc/floppy: Remove usage of the deprecated "pci-dma-compat.h" API selftests/powerpc: Add a test of sigreturning to an unaligned address powerpc/64s: Use EMIT_WARN_ENTRY for SRR debug warnings powerpc/64s: Mask NIP before checking against SRR0 powerpc/perf: Fix spelling of "its" powerpc/32: Fix boot failure with GCC latent entropy plugin powerpc/code-patching: Replace patch_instruction() by ppc_inst_write() in selftests powerpc/code-patching: Move code patching selftests in its own file powerpc/code-patching: Move instr_is_branch_{i/b}form() in code-patching.h powerpc/code-patching: Move patch_exception() outside code-patching.c powerpc/code-patching: Use test_trampoline for prefixed patch test powerpc/code-patching: Fix patch_branch() return on out-of-range failure powerpc/code-patching: Reorganise do_patch_instruction() to ease error handling powerpc/code-patching: Fix unmap_patch_area() error handling powerpc/code-patching: Fix error handling in do_patch_instruction() ...
2022-01-08kbuild: do not quote string values in include/config/auto.confMasahiro Yamada1-1/+1
The previous commit fixed up all shell scripts to not include include/config/auto.conf. Now that include/config/auto.conf is only included by Makefiles, we can change it into a more Make-friendly form. Previously, Kconfig output string values enclosed with double-quotes (both in the .config and include/config/auto.conf): CONFIG_X="foo bar" Unlike shell, Make handles double-quotes (and single-quotes as well) verbatim. We must rip them off when used. There are some patterns: [1] $(patsubst "%",%,$(CONFIG_X)) [2] $(CONFIG_X:"%"=%) [3] $(subst ",,$(CONFIG_X)) [4] $(shell echo $(CONFIG_X)) These are not only ugly, but also fragile. [1] and [2] do not work if the value contains spaces, like CONFIG_X=" foo bar " [3] does not work correctly if the value contains double-quotes like CONFIG_X="foo\"bar" [4] seems to work better, but has a cost of forking a process. Anyway, quoted strings were always PITA for our Makefiles. This commit changes Kconfig to stop quoting in include/config/auto.conf. These are the string type symbols referenced in Makefiles or scripts: ACPI_CUSTOM_DSDT_FILE ARC_BUILTIN_DTB_NAME ARC_TUNE_MCPU BUILTIN_DTB_SOURCE CC_IMPLICIT_FALLTHROUGH CC_VERSION_TEXT CFG80211_EXTRA_REGDB_KEYDIR EXTRA_FIRMWARE EXTRA_FIRMWARE_DIR EXTRA_TARGETS H8300_BUILTIN_DTB INITRAMFS_SOURCE LOCALVERSION MODULE_SIG_HASH MODULE_SIG_KEY NDS32_BUILTIN_DTB NIOS2_DTB_SOURCE OPENRISC_BUILTIN_DTB SOC_CANAAN_K210_DTB_SOURCE SYSTEM_BLACKLIST_HASH_LIST SYSTEM_REVOCATION_KEYS SYSTEM_TRUSTED_KEYS TARGET_CPU UNUSED_KSYMS_WHITELIST XILINX_MICROBLAZE0_FAMILY XILINX_MICROBLAZE0_HW_VER XTENSA_VARIANT_NAME I checked them one by one, and fixed up the code where necessary. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2021-12-23powerpc/toc: Future proof kernel tocAlan Modra2-6/+3
This patch future-proofs the kernel against linker changes that might put the toc pointer at some location other than .got+0x8000, by replacing __toc_start+0x8000 with .TOC. throughout. If the kernel's idea of the toc pointer doesn't agree with the linker, bad things happen. prom_init.c code relocating its toc is also changed so that a symbolic __prom_init_toc_start toc-pointer relative address is calculated rather than assuming that it is always at toc-pointer - 0x8000. The length calculations loading values from the toc are also avoided. It's a little incestuous to do that with unreloc_toc picking up adjusted values (which is fine in practice, they both adjust by the same amount if all goes well). I've also changed the way .got is aligned in vmlinux.lds and zImage.lds, mostly so that dumping out section info by objdump or readelf plainly shows the alignment is 256. This linker script feature was added 2005-09-27, available in FSF binutils releases from 2.17 onwards. Should be safe to use in the kernel, I think. Finally, put *(.got) before the prom_init.o entry which only needs *(.toc), so that the GOT header goes in the correct place. I don't believe this makes any difference for the kernel as it would for dynamic objects being loaded by ld.so. That change is just to stop lusers who blindly copy kernel scripts being led astray. Of course, this change needs the prom_init.c changes. Some notes on .toc and .got. .toc is a compiler generated section of addresses. .got is a linker generated section of addresses, generally built when the linker sees R_*_*GOT* relocations. In the case of powerpc64 ld.bfd, there are multiple generated .got sections, one per input object file. So you can somewhat reasonably write in a linker script an input section statement like *prom_init.o(.got .toc) to mean "the .got and .toc section for files matching *prom_init.o". On other architectures that doesn't make sense, because the linker generally has just one .got section. Even on powerpc64, note well that the GOT entries for prom_init.o may be merged with GOT entries from other objects. That means that if prom_init.o references, say, _end via some GOT relocation, and some other object also references _end via a GOT relocation, the GOT entry for _end may be in the range __prom_init_toc_start to __prom_init_toc_end and if the kernel does something special to GOT/TOC entries in that range then the value of _end as seen by objects other than prom_init.o will be affected. On the other hand the GOT entry for _end may not be in the range __prom_init_toc_start to __prom_init_toc_end. Which way it turns out is deterministic but a detail of linker operation that should not be relied on. A feature of ld.bfd is that input .toc (and .got) sections matching one linker input section statement may be sorted, to put entries used by small-model code first, near the toc base. This is why scripts for powerpc64 normally use *(.got .toc) rather than *(.got) *(.toc), since the first form allows more freedom to sort. Another feature of ld.bfd is that indirect addressing sequences using the GOT/TOC may be edited by the linker to relative addressing. In many cases relative addressing would be emitted by gcc for -mcmodel=medium if you appropriately decorate variable declarations with non-default visibility. The original patch is here: https://lore.kernel.org/linuxppc-dev/20210310034813.GM6042@bubble.grove.modra.org/ Signed-off-by: Alan Modra <amodra@au1.ibm.com> [aik: removed non-relocatable which is gone in 24d33ac5b8ffb] [aik: added <=2.24 check] [aik: because of llvm-as, kernel_toc_addr() uses "mr" instead of global register variable] Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20211221055904.555763-2-aik@ozlabs.ru
2021-12-21powerpc/dts: Remove "spidev" nodesRob Herring2-14/+0
"spidev" is not a real device, but a Linux implementation detail. It has never been documented either. The kernel has WARNed on the use of it for over 6 years. Time to remove its usage from the tree. Signed-off-by: Rob Herring <robh@kernel.org> Reviewed-by: Mark Brown <broonie@kernel.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20211217221400.3667133-1-robh@kernel.org
2021-12-16powerpc: wii.dts: Expose HW_SRNPROT on this platformEmmanuel Gil Peyrot1-0/+5
This Hollywood register isn’t properly understood, but can allow or reject access to the SRAM, which we need to set for RTC usage if it isn’t previously set correctly beforehand. See https://wiibrew.org/wiki/Hardware/Hollywood_Registers#HW_SRNPROT Signed-off-by: Emmanuel Gil Peyrot <linkmauve@linkmauve.fr> Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc) Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20211215175501.6761-4-linkmauve@linkmauve.fr
2021-12-09powerpc/4xx: Complete removal of MSI supportCédric Le Goater5-108/+0
Finish the work by removing all references to the PPC4xx_MSI config and the associated device nodes in the DTs. Signed-off-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/e92f2bb3-b5e1-c870-8151-3917a789a640@kaod.org
2021-11-29powerpc: flexible GPR range save/restore macrosNicholas Piggin1-16/+15
Introduce macros that operate on a (start, end) range of GPRs, which reduces lines of code and need to do mental arithmetic while reading the code. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Reviewed-by: Segher Boessenkool <segher@kernel.crashing.org> Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20211022061322.2671178-1-npiggin@gmail.com
2021-11-05Merge tag 'powerpc-5.16-1' of ↵Linus Torvalds18-45/+49
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc updates from Michael Ellerman: - Enable STRICT_KERNEL_RWX for Freescale 85xx platforms. - Activate CONFIG_STRICT_KERNEL_RWX by default, while still allowing it to be disabled. - Add support for out-of-line static calls on 32-bit. - Fix oopses doing bpf-to-bpf calls when STRICT_KERNEL_RWX is enabled. - Fix boot hangs on e5500 due to stale value in ESR passed to do_page_fault(). - Fix several bugs on pseries in handling of device tree cache information for hotplugged CPUs, and/or during partition migration. - Various other small features and fixes. Thanks to Alexey Kardashevskiy, Alistair Popple, Anatolij Gustschin, Andrew Donnellan, Athira Rajeev, Bixuan Cui, Bjorn Helgaas, Cédric Le Goater, Christophe Leroy, Daniel Axtens, Daniel Henrique Barboza, Denis Kirjanov, Fabiano Rosas, Frederic Barrat, Gustavo A. R. Silva, Hari Bathini, Jacques de Laval, Joel Stanley, Kai Song, Kajol Jain, Laurent Vivier, Leonardo Bras, Madhavan Srinivasan, Nathan Chancellor, Nathan Lynch, Naveen N. Rao, Nicholas Piggin, Nick Desaulniers, Niklas Schnelle, Oliver O'Halloran, Rob Herring, Russell Currey, Srikar Dronamraju, Stan Johnson, Tyrel Datwyler, Uwe Kleine-König, Vasant Hegde, Wan Jiabing, and Xiaoming Ni, * tag 'powerpc-5.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (73 commits) powerpc/8xx: Fix Oops with STRICT_KERNEL_RWX without DEBUG_RODATA_TEST powerpc/32e: Ignore ESR in instruction storage interrupt handler powerpc/powernv/prd: Unregister OPAL_MSG_PRD2 notifier during module unload powerpc: Don't provide __kernel_map_pages() without ARCH_SUPPORTS_DEBUG_PAGEALLOC MAINTAINERS: Update powerpc KVM entry powerpc/xmon: fix task state output powerpc/44x/fsp2: add missing of_node_put powerpc/dcr: Use cmplwi instead of 3-argument cmpli KVM: PPC: Tick accounting should defer vtime accounting 'til after IRQ handling powerpc/security: Use a mutex for interrupt exit code patching powerpc/83xx/mpc8349emitx: Make mcu_gpiochip_remove() return void powerpc/fsl_booke: Fix setting of exec flag when setting TLBCAMs powerpc/book3e: Fix set_memory_x() and set_memory_nx() powerpc/nohash: Fix __ptep_set_access_flags() and ptep_set_wrprotect() powerpc/bpf: Fix write protecting JIT code selftests/powerpc: Use date instead of EPOCHSECONDS in mitigation-patching.sh powerpc/64s/interrupt: Fix check_return_regs_valid() false positive powerpc/boot: Set LC_ALL=C in wrapper script powerpc/64s: Default to 64K pages for 64 bit book3s Revert "powerpc/audit: Convert powerpc to AUDIT_ARCH_COMPAT_GENERIC" ...
2021-10-27powerpc/boot: Set LC_ALL=C in wrapper scriptChristophe Leroy1-0/+2
While trying to build a simple Image for ACADIA platform, I got the following error: WRAP arch/powerpc/boot/simpleImage.acadia INFO: Uncompressed kernel (size 0x6ae7d0) overlaps the address of the wrapper(0x400000) INFO: Fixing the link_address of wrapper to (0x700000) powerpc64-linux-gnu-ld : mode d'émulation non reconnu : -T Émulations prises en charge : elf64ppc elf32ppc elf32ppclinux elf32ppcsim elf64lppc elf32lppc elf32lppclinux elf32lppcsim make[1]: *** [arch/powerpc/boot/Makefile:424 : arch/powerpc/boot/simpleImage.acadia] Erreur 1 make: *** [arch/powerpc/Makefile:285 : simpleImage.acadia] Erreur 2 Trying again with V=1 shows the following command powerpc64-linux-gnu-ld -m -T arch/powerpc/boot/zImage.lds -Ttext 0x700000 --no-dynamic-linker -o arch/powerpc/boot/simpleImage.acadia -Map wrapper.map arch/powerpc/boot/fixed-head.o arch/powerpc/boot/simpleboot.o ./zImage.3278022.o arch/powerpc/boot/wrapper.a The argument of '-m' is missing. This is due to the wrapper script calling 'objdump -p vmlinux' and looking for 'file format', whereas the output of objdump is: vmlinux: format de fichier elf32-powerpc En-tête de programme: LOAD off 0x00010000 vaddr 0xc0000000 paddr 0x00000000 align 2**16 filesz 0x0069e1d4 memsz 0x006c128c flags rwx NOTE off 0x0064591c vaddr 0xc063591c paddr 0x0063591c align 2**2 filesz 0x00000054 memsz 0x00000054 flags --- Add LC_ALL=C at the beginning of the wrapper script in order to get the output expected by the script: vmlinux: file format elf32-powerpc Program Header: LOAD off 0x00010000 vaddr 0xc0000000 paddr 0x00000000 align 2**16 filesz 0x0069e1d4 memsz 0x006c128c flags rwx NOTE off 0x0064591c vaddr 0xc063591c paddr 0x0063591c align 2**2 filesz 0x00000054 memsz 0x00000054 flags --- Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Acked-by: Segher Boessenkool <segher@kernel.crashing.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/a9ff3bc98035f63b122c051f02dc47c7aed10430.1635256089.git.christophe.leroy@csgroup.eu
2021-10-22powerpc/5200: dts: fix memory node unit nameAnatolij Gustschin12-12/+12
Fixes build warnings: Warning (unit_address_vs_reg): /memory: node has a reg or ranges property, but no unit name Signed-off-by: Anatolij Gustschin <agust@denx.de> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20211013220532.24759-4-agust@denx.de
2021-10-22powerpc/5200: dts: fix pci ranges warningsAnatolij Gustschin10-30/+30
Fix ranges property warnings: pci@f0000d00:ranges: 'oneOf' conditional failed, one must be fixed: Signed-off-by: Anatolij Gustschin <agust@denx.de> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20211013220532.24759-3-agust@denx.de
2021-10-22powerpc/5200: dts: add missing pci rangesAnatolij Gustschin1-1/+3
Add ranges property to fix build warnings: Warning (pci_bridge): /pci@f0000d00: missing ranges for PCI bridge (or not a bridge) Signed-off-by: Anatolij Gustschin <agust@denx.de> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20211013220532.24759-2-agust@denx.de
2021-10-13powerpc/boot: Use CONFIG_PPC_POWERNV to compile OPAL supportCédric Le Goater2-2/+2
CONFIG_PPC64_BOOT_WRAPPER is selected by CPU_LITTLE_ENDIAN which is used to compile support for other platforms such as Microwatt. There is no need for OPAL calls on these. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20211011070356.99952-1-clg@kaod.org
2021-10-02powerpc/fsl/dts: Fix phy-connection-type for fm1mac3Pali Rohár1-1/+1
Property phy-connection-type contains invalid value "sgmii-2500" per scheme defined in file ethernet-controller.yaml. Correct phy-connection-type value should be "2500base-x". Signed-off-by: Pali Rohár <pali@kernel.org> Fixes: 84e0f1c13806 ("powerpc/mpc85xx: Add MDIO bus muxing support to the board device tree(s)") Acked-by: Scott Wood <oss@buserror.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-14powerpc/boot: Fix build failure since GCC 4.9 removalMichael Ellerman1-1/+1
Stephen reported that the build was broken since commit 6d2ef226f2f1 ("compiler_attributes.h: drop __has_attribute() support for gcc4"), with errors such as: include/linux/compiler_attributes.h:296:5: warning: "__has_attribute" is not defined, evaluates to 0 [-Wundef] 296 | #if __has_attribute(__warning__) | ^~~~~~~~~~~~~~~ make[2]: *** [arch/powerpc/boot/Makefile:225: arch/powerpc/boot/crt0.o] Error 1 But we expect __has_attribute() to always be defined now that we've stopped using GCC 4. Linus debugged it to the point of reading the GCC sources, and noticing that the problem is that __has_attribute() is not defined when preprocessing assembly files, which is what we're doing here. Our assembly files don't include, or need, compiler_attributes.h, but they are getting it unconditionally from the -include in BOOT_CFLAGS, which is then added in its entirety to BOOT_AFLAGS. That -include was added in commit 77433830ed16 ("powerpc: boot: include compiler_attributes.h") so that we'd have "fallthrough" and other attributes defined for the C files in arch/powerpc/boot. But it's not needed for assembly files. The minimal fix is to move the addition to BOOT_CFLAGS of -include compiler_attributes.h until after we've copied BOOT_CFLAGS into BOOT_AFLAGS. That avoids including compiler_attributes.h for asm files, but makes no other change to BOOT_CFLAGS or BOOT_AFLAGS. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Debugged-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-08-27powerpc/microwatt: Add Ethernet to device treeJoel Stanley1-0/+12
The liteeth network device is used in the Microwatt soc. Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210826122653.3236867-2-joel@jms.id.au
2021-08-27Merge changes from Paul GortmakerMichael Ellerman7-732/+1
Merge the changes to retire the legacy WR sbc8548 and sbc8641 platforms from Paul. These were sent as a pull request, but I rebased them onto rc2 so as not to pull too many unrelated changes in to my next. Description from Paul's pull request follows: In v2.6.27 (2008, 917f0af9e5a9) the sbc8260 support was implicitly retired by not being carried forward through the ppc --> powerpc device tree transition. Then, in v3.6 (2012, b048b4e17cbb) we retired the support for the sbc8560 boards. Next, in v4.18 (2017, 3bc6cf5a86e5) we retired the support for the 2006 vintage sbc834x boards. The sbc8548 and sbc8641d boards were maybe 1-2 years newer than the sbc834x boards, but it is also 3+ years later, so it makes sense to now retire them as well - which is what is done here. These two remaining WR boards were based on the Freescale MPC8548-CDS and the MPC8641D-HPCN reference board implementations. Having had the chance to use these and many other Fsl ref boards, I know this: The Freescale reference boards were typically produced in limited quantity and primarily available to BSP developers and hardware designers, and not likely to have found a 2nd life with hobbyists and/or collectors. It was good to have that BSP code subjected to mainline review and hence also widely available back in the day. But given the above, we should probably also be giving serious consideration to retiring additional similar age/type reference board platforms as well. I've always felt it is important for us to be proactive in retiring old code, since it has a genuine non-zero carrying cost, as described in the 930d52c012b8 merge log. But for the here and now, we just clean up the remaining BSP code that I had added for SBC platforms. Link: https://lore.kernel.org/r/20210824174209.GB160508@windriver.com
2021-08-27powerpc: retire sbc8641d board supportPaul Gortmaker1-176/+0
The support was for this was added to mainline over 12 years ago, in v2.6.26 [4e8aae89a35d] just around the ppc --> powerpc migration. I believe the board was introduced shortly after the sbc8548 board, making it roughly a 14 year old platform - with the CPU speed and memory size typical for that era. I haven't had one of these boards for several years, and availability was discontinued several years before that. Given that, there is no point in adding a burden to testing coverage that builds all possible defconfigs, so it makes sense to remove it. Of course it will remain in the git history forever, for anyone who happens to find a functional board and wants to tinker with it. Acked-by: Scott Wood <oss@buserror.net> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2021-08-27powerpc: retire sbc8548 board supportPaul Gortmaker6-556/+1
The support was for this was mainlined 13 years ago, in v2.6.25 [0e0fffe88767] just around the ppc --> powerpc migration. I believe the board was introduced a year or two before that, so it is roughly a 15 year old platform - with the CPU speed and memory size that was typical for that era. I haven't had one of these boards for several years, and availability was discontinued several years before that. Given that, there is no point in adding a burden to testing coverage that builds all possible defconfigs, so it makes sense to remove it. Of course it will remain in the git history forever, for anyone who happens to find a functional board and wants to tinker with it. Acked-by: Scott Wood <oss@buserror.net> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2021-08-13powerpc: wii.dts: Expose the OTP on this platformEmmanuel Gil Peyrot1-2/+7
This can be used by the newly-added nintendo-otp nvmem module. Signed-off-by: Emmanuel Gil Peyrot <linkmauve@linkmauve.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210801073822.12452-5-linkmauve@linkmauve.fr
2021-08-13powerpc: wii.dts: Reduce the size of the control areaEmmanuel Gil Peyrot1-1/+7
This is wrong, but needed in order to avoid overlapping ranges with the OTP area added in the next commit. A refactor of this part of the device tree is needed: according to Wiibrew[1], this area starts at 0x0d800000 and spans 0x400 bytes (that is, 0x100 32-bit registers), encompassing PIC and GPIO registers, amongst the ones already exposed in this device tree, which should become children of the control@d800000 node. [1] https://wiibrew.org/wiki/Hardware/Hollywood_Registers Signed-off-by: Emmanuel Gil Peyrot <linkmauve@linkmauve.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210801073822.12452-4-linkmauve@linkmauve.fr
2021-08-04powerpc: move the install rule to arch/powerpc/MakefileMasahiro Yamada1-6/+0
Currently, the install target in arch/powerpc/Makefile descends into arch/powerpc/boot/Makefile to invoke the shell script, but there is no good reason to do so. arch/powerpc/Makefile can run the shell script directly. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210729141937.445051-3-masahiroy@kernel.org
2021-08-04powerpc: make the install target not depend on any build artifactMasahiro Yamada2-1/+15
The install target should not depend on any build artifact. The reason is explained in commit 19514fc665ff ("arm, kbuild: make "make install" not depend on vmlinux"). Change the PowerPC installation code in a similar way. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210729141937.445051-2-masahiroy@kernel.org
2021-08-04powerpc: remove unused zInstall target from arch/powerpc/boot/MakefileMasahiro Yamada2-18/+1
Commit c913e5f95e54 ("powerpc/boot: Don't install zImage.* from make install") added the zInstall target to arch/powerpc/boot/Makefile, but you cannot use it since the corresponding hook is missing in arch/powerpc/Makefile. It has never worked since its addition. Nobody has complained about it for 7 years, which means this code was unneeded. With this removal, the install.sh will be passed in with 4 parameters. Simplify the shell script. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210729141937.445051-1-masahiroy@kernel.org
2021-07-02Merge tag 'powerpc-5.14-1' of ↵Linus Torvalds8-31/+216
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc updates from Michael Ellerman: - A big series refactoring parts of our KVM code, and converting some to C. - Support for ARCH_HAS_SET_MEMORY, and ARCH_HAS_STRICT_MODULE_RWX on some CPUs. - Support for the Microwatt soft-core. - Optimisations to our interrupt return path on 64-bit. - Support for userspace access to the NX GZIP accelerator on PowerVM on Power10. - Enable KUAP and KUEP by default on 32-bit Book3S CPUs. - Other smaller features, fixes & cleanups. Thanks to: Andy Shevchenko, Aneesh Kumar K.V, Arnd Bergmann, Athira Rajeev, Baokun Li, Benjamin Herrenschmidt, Bharata B Rao, Christophe Leroy, Daniel Axtens, Daniel Henrique Barboza, Finn Thain, Geoff Levand, Haren Myneni, Jason Wang, Jiapeng Chong, Joel Stanley, Jordan Niethe, Kajol Jain, Nathan Chancellor, Nathan Lynch, Naveen N. Rao, Nicholas Piggin, Nick Desaulniers, Paul Mackerras, Russell Currey, Sathvika Vasireddy, Shaokun Zhang, Stephen Rothwell, Sudeep Holla, Suraj Jitindar Singh, Tom Rix, Vaibhav Jain, YueHaibing, Zhang Jianhua, and Zhen Lei. * tag 'powerpc-5.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (218 commits) powerpc: Only build restart_table.c for 64s powerpc/64s: move ret_from_fork etc above __end_soft_masked powerpc/64s/interrupt: clean up interrupt return labels powerpc/64/interrupt: add missing kprobe annotations on interrupt exit symbols powerpc/64: enable MSR[EE] in irq replay pt_regs powerpc/64s/interrupt: preserve regs->softe for NMI interrupts powerpc/64s: add a table of implicit soft-masked addresses powerpc/64e: remove implicit soft-masking and interrupt exit restart logic powerpc/64e: fix CONFIG_RELOCATABLE build warnings powerpc/64s: fix hash page fault interrupt handler powerpc/4xx: Fix setup_kuep() on SMP powerpc/32s: Fix setup_{kuap/kuep}() on SMP powerpc/interrupt: Use names in check_return_regs_valid() powerpc/interrupt: Also use exit_must_hard_disable() on PPC32 powerpc/sysfs: Replace sizeof(arr)/sizeof(arr[0]) with ARRAY_SIZE powerpc/ptrace: Refactor regs_set_return_{msr/ip} powerpc/ptrace: Move set_return_regs_changed() before regs_set_return_{msr/ip} powerpc/stacktrace: Fix spurious "stale" traces in raise_backtrace_ipi() powerpc/pseries/vas: Include irqdomain.h powerpc: mark local variables around longjmp as volatile ...
2021-06-21powerpc/boot: Add a boot wrapper for MicrowattJoel Stanley3-0/+33
This allows microwatt's kernel to be built with an embedded device tree. Load to arch/powerpc/boot/dtbImage.microwatt to 0x500000: mw_debug -b fpga stop load arch/powerpc/boot/dtbImage.microwatt 500000 start Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Paul Mackerras <paulus@ozlabs.org> Reviewed-by: Segher Boessenkool <segher@kernel.crashing.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/YMwX19wym3kQ7guu@thinks.paulus.ozlabs.org
2021-06-21powerpc/boot: Fixup device-tree on little endianBenjamin Herrenschmidt2-27/+41
This fixes the core devtree.c functions and the ns16550 UART backend. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@ozlabs.org> Reviewed-by: Segher Boessenkool <segher@kernel.crashing.org> Acked-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/YMwXrPT8nc4YUdJ9@thinks.paulus.ozlabs.org
2021-06-21powerpc/microwatt: Use standard 16550 UART for consoleBenjamin Herrenschmidt1-6/+21
This adds support to the Microwatt platform to use the standard 16550-style UART which available in the standalone Microwatt FPGA. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@ozlabs.org> Reviewed-by: Segher Boessenkool <segher@kernel.crashing.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/YMwXGCTzedpQje7r@thinks.paulus.ozlabs.org
2021-06-21powerpc/xics: Add a native ICS backend for microwattBenjamin Herrenschmidt1-0/+18
This is a simple native ICS backend that matches the layout of the Microwatt implementation of ICS. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@ozlabs.org> Reviewed-by: Segher Boessenkool <segher@kernel.crashing.org> [mpe: Add empty ics_native_init() to unbreak non-microwatt builds] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> fixup-ics Link: https://lore.kernel.org/r/YMwW8cxrwB2W5EUN@thinks.paulus.ozlabs.org
2021-06-21powerpc/microwatt: Populate platform bus from device-treeBenjamin Herrenschmidt1-0/+7
Just like any other embedded platform. Add an empty soc node. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@ozlabs.org> Reviewed-by: Segher Boessenkool <segher@kernel.crashing.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/YMwWx98+PMibZq/G@thinks.paulus.ozlabs.org
2021-06-21powerpc: Add Microwatt device treePaul Mackerras1-0/+98
Microwatt currently runs with MSR[HV] = 0, hence the usable-privilege properties don't have bit 2 (for HV support) set, and we need the /chosen/ibm,architecture-vec-5 property. Signed-off-by: Paul Mackerras <paulus@ozlabs.org> Reviewed-by: Segher Boessenkool <segher@kernel.crashing.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/YMwWkPcXlGDSQ9Q3@thinks.paulus.ozlabs.org
2021-06-21powerpc/boot: add zImage.lds to targetsNicholas Piggin1-1/+1
This prevents spurious rebuilds of the lds and then wrappers. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210611111104.1058991-1-npiggin@gmail.com
2021-06-10powerpc/ps3: Re-align DTB in imageGeoff Levand1-1/+1
Change the PS3 linker script to align the DTB at 8 bytes, the same alignment as that of the of the 'generic' powerpc linker script. Signed-off-by: Geoff Levand <geoff@infradead.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/245897ed65e402686a4b114ba618e935cb5c6506.1622822173.git.geoff@infradead.org
2021-05-27powerpc/fsl: set fsl,i2c-erratum-a004447 flag for P1010 i2c controllersChris Packham1-0/+8
The i2c controllers on the P1010 have an erratum where the documented scheme for i2c bus recovery will not work (A-004447). A different mechanism is needed which is documented in the P1010 Chip Errata Rev L. Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Acked-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-05-27powerpc/fsl: set fsl,i2c-erratum-a004447 flag for P2041 i2c controllersChris Packham1-0/+16
The i2c controllers on the P2040/P2041 have an erratum where the documented scheme for i2c bus recovery will not work (A-004447). A different mechanism is needed which is documented in the P2040 Chip Errata Rev Q (latest available at the time of writing). Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Acked-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-05-17powerpc/boot: Fix a typo in partial_decompress() commentZhang Jianhua1-2/+2
outbuf is the output buffer, output_size is the size of the output buffer. Signed-off-by: Zhang Jianhua <chris.zjh@huawei.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210510075134.252978-1-chris.zjh@huawei.com
2021-05-02kbuild: replace LANG=C with LC_ALL=CMasahiro Yamada1-1/+1
LANG gives a weak default to each LC_* in case it is not explicitly defined. LC_ALL, if set, overrides all other LC_* variables. LANG < LC_CTYPE, LC_COLLATE, LC_MONETARY, LC_NUMERIC, ... < LC_ALL This is why documentation such as [1] suggests to set LC_ALL in build scripts to get the deterministic result. LANG=C is not strong enough to override LC_* that may be set by end users. [1]: https://reproducible-builds.org/docs/locales/ Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc) Reviewed-by: Matthias Maennich <maennich@google.com> Acked-by: Matthieu Baerts <matthieu.baerts@tessares.net> (mptcp) Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-29Merge tag 'net-next-5.13' of ↵Linus Torvalds4-33/+0
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - bpf: - allow bpf programs calling kernel functions (initially to reuse TCP congestion control implementations) - enable task local storage for tracing programs - remove the need to store per-task state in hash maps, and allow tracing programs access to task local storage previously added for BPF_LSM - add bpf_for_each_map_elem() helper, allowing programs to walk all map elements in a more robust and easier to verify fashion - sockmap: support UDP and cross-protocol BPF_SK_SKB_VERDICT redirection - lpm: add support for batched ops in LPM trie - add BTF_KIND_FLOAT support - mostly to allow use of BTF on s390 which has floats in its headers files - improve BPF syscall documentation and extend the use of kdoc parsing scripts we already employ for bpf-helpers - libbpf, bpftool: support static linking of BPF ELF files - improve support for encapsulation of L2 packets - xdp: restructure redirect actions to avoid a runtime lookup, improving performance by 4-8% in microbenchmarks - xsk: build skb by page (aka generic zerocopy xmit) - improve performance of software AF_XDP path by 33% for devices which don't need headers in the linear skb part (e.g. virtio) - nexthop: resilient next-hop groups - improve path stability on next-hops group changes (incl. offload for mlxsw) - ipv6: segment routing: add support for IPv4 decapsulation - icmp: add support for RFC 8335 extended PROBE messages - inet: use bigger hash table for IP ID generation - tcp: deal better with delayed TX completions - make sure we don't give up on fast TCP retransmissions only because driver is slow in reporting that it completed transmitting the original - tcp: reorder tcp_congestion_ops for better cache locality - mptcp: - add sockopt support for common TCP options - add support for common TCP msg flags - include multiple address ids in RM_ADDR - add reset option support for resetting one subflow - udp: GRO L4 improvements - improve 'forward' / 'frag_list' co-existence with UDP tunnel GRO, allowing the first to take place correctly even for encapsulated UDP traffic - micro-optimize dev_gro_receive() and flow dissection, avoid retpoline overhead on VLAN and TEB GRO - use less memory for sysctls, add a new sysctl type, to allow using u8 instead of "int" and "long" and shrink networking sysctls - veth: allow GRO without XDP - this allows aggregating UDP packets before handing them off to routing, bridge, OvS, etc. - allow specifing ifindex when device is moved to another namespace - netfilter: - nft_socket: add support for cgroupsv2 - nftables: add catch-all set element - special element used to define a default action in case normal lookup missed - use net_generic infra in many modules to avoid allocating per-ns memory unnecessarily - xps: improve the xps handling to avoid potential out-of-bound accesses and use-after-free when XPS change race with other re-configuration under traffic - add a config knob to turn off per-cpu netdev refcnt to catch underflows in testing Device APIs: - add WWAN subsystem to organize the WWAN interfaces better and hopefully start driving towards more unified and vendor- independent APIs - ethtool: - add interface for reading IEEE MIB stats (incl. mlx5 and bnxt support) - allow network drivers to dump arbitrary SFP EEPROM data, current offset+length API was a poor fit for modern SFP which define EEPROM in terms of pages (incl. mlx5 support) - act_police, flow_offload: add support for packet-per-second policing (incl. offload for nfp) - psample: add additional metadata attributes like transit delay for packets sampled from switch HW (and corresponding egress and policy-based sampling in the mlxsw driver) - dsa: improve support for sandwiched LAGs with bridge and DSA - netfilter: - flowtable: use direct xmit in topologies with IP forwarding, bridging, vlans etc. - nftables: counter hardware offload support - Bluetooth: - improvements for firmware download w/ Intel devices - add support for reading AOSP vendor capabilities - add support for virtio transport driver - mac80211: - allow concurrent monitor iface and ethernet rx decap - set priority and queue mapping for injected frames - phy: add support for Clause-45 PHY Loopback - pci/iov: add sysfs MSI-X vector assignment interface to distribute MSI-X resources to VFs (incl. mlx5 support) New hardware/drivers: - dsa: mv88e6xxx: add support for Marvell mv88e6393x - 11-port Ethernet switch with 8x 1-Gigabit Ethernet and 3x 10-Gigabit interfaces. - dsa: support for legacy Broadcom tags used on BCM5325, BCM5365 and BCM63xx switches - Microchip KSZ8863 and KSZ8873; 3x 10/100Mbps Ethernet switches - ath11k: support for QCN9074 a 802.11ax device - Bluetooth: Broadcom BCM4330 and BMC4334 - phy: Marvell 88X2222 transceiver support - mdio: add BCM6368 MDIO mux bus controller - r8152: support RTL8153 and RTL8156 (USB Ethernet) chips - mana: driver for Microsoft Azure Network Adapter (MANA) - Actions Semi Owl Ethernet MAC - can: driver for ETAS ES58X CAN/USB interfaces Pure driver changes: - add XDP support to: enetc, igc, stmmac - add AF_XDP support to: stmmac - virtio: - page_to_skb() use build_skb when there's sufficient tailroom (21% improvement for 1000B UDP frames) - support XDP even without dedicated Tx queues - share the Tx queues with the stack when necessary - mlx5: - flow rules: add support for mirroring with conntrack, matching on ICMP, GTP, flex filters and more - support packet sampling with flow offloads - persist uplink representor netdev across eswitch mode changes - allow coexistence of CQE compression and HW time-stamping - add ethtool extended link error state reporting - ice, iavf: support flow filters, UDP Segmentation Offload - dpaa2-switch: - move the driver out of staging - add spanning tree (STP) support - add rx copybreak support - add tc flower hardware offload on ingress traffic - ionic: - implement Rx page reuse - support HW PTP time-stamping - octeon: support TC hardware offloads - flower matching on ingress and egress ratelimitting. - stmmac: - add RX frame steering based on VLAN priority in tc flower - support frame preemption (FPE) - intel: add cross time-stamping freq difference adjustment - ocelot: - support forwarding of MRP frames in HW - support multiple bridges - support PTP Sync one-step timestamping - dsa: mv88e6xxx, dpaa2-switch: offload bridge port flags like learning, flooding etc. - ipa: add IPA v4.5, v4.9 and v4.11 support (Qualcomm SDX55, SM8350, SC7280 SoCs) - mt7601u: enable TDLS support - mt76: - add support for 802.3 rx frames (mt7915/mt7615) - mt7915 flash pre-calibration support - mt7921/mt7663 runtime power management fixes" * tag 'net-next-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2451 commits) net: selftest: fix build issue if INET is disabled net: netrom: nr_in: Remove redundant assignment to ns net: tun: Remove redundant assignment to ret net: phy: marvell: add downshift support for M88E1240 net: dsa: ksz: Make reg_mib_cnt a u8 as it never exceeds 255 net/sched: act_ct: Remove redundant ct get and check icmp: standardize naming of RFC 8335 PROBE constants bpf, selftests: Update array map tests for per-cpu batched ops bpf: Add batched ops support for percpu array bpf: Implement formatted output helpers with bstr_printf seq_file: Add a seq_bprintf function sfc: adjust efx->xdp_tx_queue_count with the real number of initialized queues net:nfc:digital: Fix a double free in digital_tg_recv_dep_req net: fix a concurrency bug in l2tp_tunnel_register() net/smc: Remove redundant assignment to rc mpls: Remove redundant assignment to err llc2: Remove redundant assignment to rc net/tls: Remove redundant initialization of record rds: Remove redundant assignment to nr_sig dt-bindings: net: mdio-gpio: add compatible for microchip,mdio-smi0 ...
2021-04-16powerpc: dts: fsl: Drop obsolete fsl,rx-bit-map and fsl,tx-bit-map propertiesClaudiu Manoil4-33/+0
These are very old properties that were used by the "gianfar" ethernet driver. They don't have documented bindings and are obsolete. Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-23xsysace: Remove SYSACE driverMichal Simek1-7/+0
Sysace IP is no longer used on Xilinx PowerPC 405/440 and Microblaze systems. The driver is not regularly tested and very likely not working for quite a long time that's why remove it. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-12-21powerpc/boot: Fix build of dts/fslMichael Ellerman1-0/+2
The lkp robot reported that some configs fail to build, for example mpc85xx_smp_defconfig, with: cc1: fatal error: opening output file arch/powerpc/boot/dts/fsl/.mpc8540ads.dtb.dts.tmp: No such file or directory This bisects to: cc8a51ca6f05 ("kbuild: always create directories of targets") Although that commit claims to be about in-tree builds, it somehow breaks out-of-tree builds. But presumably it's just exposing a latent bug in our Makefiles. We can fix it by adding to targets for dts/fsl in the same way that we do for dts. Fixes: cc8a51ca6f05 ("kbuild: always create directories of targets") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20201215032906.473460-1-mpe@ellerman.id.au
2020-12-17Merge tag 'powerpc-5.11-1' of ↵Linus Torvalds5-24/+23
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc updates from Michael Ellerman: - Switch to the generic C VDSO, as well as some cleanups of our VDSO setup/handling code. - Support for KUAP (Kernel User Access Prevention) on systems using the hashed page table MMU, using memory protection keys. - Better handling of PowerVM SMT8 systems where all threads of a core do not share an L2, allowing the scheduler to make better scheduling decisions. - Further improvements to our machine check handling. - Show registers when unwinding interrupt frames during stack traces. - Improvements to our pseries (PowerVM) partition migration code. - Several series from Christophe refactoring and cleaning up various parts of the 32-bit code. - Other smaller features, fixes & cleanups. Thanks to: Alan Modra, Alexey Kardashevskiy, Andrew Donnellan, Aneesh Kumar K.V, Ard Biesheuvel, Athira Rajeev, Balamuruhan S, Bill Wendling, Cédric Le Goater, Christophe Leroy, Christophe Lombard, Colin Ian King, Daniel Axtens, David Hildenbrand, Frederic Barrat, Ganesh Goudar, Gautham R. Shenoy, Geert Uytterhoeven, Giuseppe Sacco, Greg Kurz, Harish, Jan Kratochvil, Jordan Niethe, Kaixu Xia, Laurent Dufour, Leonardo Bras, Madhavan Srinivasan, Mahesh Salgaonkar, Mathieu Desnoyers, Nathan Lynch, Nicholas Piggin, Oleg Nesterov, Oliver O'Halloran, Oscar Salvador, Po-Hsu Lin, Qian Cai, Qinglang Miao, Randy Dunlap, Ravi Bangoria, Sachin Sant, Sandipan Das, Sebastian Andrzej Siewior , Segher Boessenkool, Srikar Dronamraju, Tyrel Datwyler, Uwe Kleine-König, Vincent Stehlé, Youling Tang, and Zhang Xiaoxu. * tag 'powerpc-5.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (304 commits) powerpc/32s: Fix cleanup_cpu_mmu_context() compile bug powerpc: Add config fragment for disabling -Werror powerpc/configs: Add ppc64le_allnoconfig target powerpc/powernv: Rate limit opal-elog read failure message powerpc/pseries/memhotplug: Quieten some DLPAR operations powerpc/ps3: use dma_mapping_error() powerpc: force inlining of csum_partial() to avoid multiple csum_partial() with GCC10 powerpc/perf: Fix Threshold Event Counter Multiplier width for P10 powerpc/mm: Fix hugetlb_free_pmd_range() and hugetlb_free_pud_range() KVM: PPC: Book3S HV: Fix mask size for emulated msgsndp KVM: PPC: fix comparison to bool warning KVM: PPC: Book3S: Assign boolean values to a bool variable powerpc: Inline setup_kup() powerpc/64s: Mark the kuap/kuep functions non __init KVM: PPC: Book3S HV: XIVE: Add a comment regarding VP numbering powerpc/xive: Improve error reporting of OPAL calls powerpc/xive: Simplify xive_do_source_eoi() powerpc/xive: Remove P9 DD1 flag XIVE_IRQ_FLAG_EOI_FW powerpc/xive: Remove P9 DD1 flag XIVE_IRQ_FLAG_MASK_FW powerpc/xive: Remove P9 DD1 flag XIVE_IRQ_FLAG_SHIFT_BUG ...
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-10 01:22:58 +0000