summaryrefslogtreecommitdiffstats
path: root/arch/powerpc/boot/dts
AgeCommit message (Collapse)AuthorFilesLines
2014-03-19powerpc: T4240: Add ina220 node in dtsTang Yuantian1-0/+42
Add power sensor chip ina220 node in dts to support power monitor Signed-off-by: Tang Yuantian <Yuantian.Tang@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
2014-03-19powerpc/mpc85xx: Update clock nodes in device treeTang Yuantian16-0/+536
The following SoCs will be affected: p2041, p3041, p4080, p5020, p5040, b4420, b4860, t4240 Signed-off-by: Tang Yuantian <Yuantian.Tang@freescale.com> Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
2014-01-29Merge remote-tracking branch 'agust/next' into nextBenjamin Herrenschmidt3-2/+171
<< Switch mpc512x to the common clock framework and adapt mpc512x drivers to use the new clock driver. Old PPC_CLOCK code is removed entirely since there are no users any more. >>
2014-01-27Merge branch 'next' of ↵Linus Torvalds20-159/+1017
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc Pull powerpc updates from Ben Herrenschmidt: "So here's my next branch for powerpc. A bit late as I was on vacation last week. It's mostly the same stuff that was in next already, I just added two patches today which are the wiring up of lockref for powerpc, which for some reason fell through the cracks last time and is trivial. The highlights are, in addition to a bunch of bug fixes: - Reworked Machine Check handling on kernels running without a hypervisor (or acting as a hypervisor). Provides hooks to handle some errors in real mode such as TLB errors, handle SLB errors, etc... - Support for retrieving memory error information from the service processor on IBM servers running without a hypervisor and routing them to the memory poison infrastructure. - _PAGE_NUMA support on server processors - 32-bit BookE relocatable kernel support - FSL e6500 hardware tablewalk support - A bunch of new/revived board support - FSL e6500 deeper idle states and altivec powerdown support You'll notice a generic mm change here, it has been acked by the relevant authorities and is a pre-req for our _PAGE_NUMA support" * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (121 commits) powerpc: Implement arch_spin_is_locked() using arch_spin_value_unlocked() powerpc: Add support for the optimised lockref implementation powerpc/powernv: Call OPAL sync before kexec'ing powerpc/eeh: Escalate error on non-existing PE powerpc/eeh: Handle multiple EEH errors powerpc: Fix transactional FP/VMX/VSX unavailable handlers powerpc: Don't corrupt transactional state when using FP/VMX in kernel powerpc: Reclaim two unused thread_info flag bits powerpc: Fix races with irq_work Move precessing of MCE queued event out from syscall exit path. pseries/cpuidle: Remove redundant call to ppc64_runlatch_off() in cpu idle routines powerpc: Make add_system_ram_resources() __init powerpc: add SATA_MV to ppc64_defconfig powerpc/powernv: Increase candidate fw image size powerpc: Add debug checks to catch invalid cpu-to-node mappings powerpc: Fix the setup of CPU-to-Node mappings during CPU online powerpc/iommu: Don't detach device without IOMMU group powerpc/eeh: Hotplug improvement powerpc/eeh: Call opal_pci_reinit() on powernv for restoring config space powerpc/eeh: Add restore_config operation ...
2014-01-16dt/bindings: Remove device_type "serial" from marvell,mv64360-mpscGrant Likely2-4/+0
device_type is deprecated. There is no need to check for it in device driver code and no need to specify it in the device tree. Remove the property from stock .dts files and remove the check for it from device drivers. This change should be 100% backwards compatible with old device trees. Signed-off-by: Grant Likely <grant.likely@linaro.org> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: Kumar Gala <galak@codeaurora.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-01-16dt/bindings: remove users of device_type "mdio"Grant Likely6-6/+0
device_type is a deprecated property, but some MDIO bus nodes still have it. Except for a couple of old binding (compatible="gianfar" and compatible="ucc_geth_phy") the kernel doesn't look for device_type="mdio" at all. This patch removes all instances of device_type="mdio" from the binding documentation and the .dts files. Signed-off-by: Grant Likely <grant.likely@linaro.org> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: Kumar Gala <galak@codeaurora.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-01-16dt/bindings: Remove all references to device_type "ethernet-phy"Grant Likely59-145/+0
The device_type property is deprecated for the flattened device tree and the value "ethernet-phy" has never been defined as having a useful meaning. Neither the kernel nor u-boot depend on it. It should never have appeared in PHY bindings. This patch removes all references to "ethernet-phy" as a device_type value from the documentation and the .dts files. This patch was generated mechanically with the following command and then verified by looking at the diff. sed -i '/"ethernet-phy"/d' `git grep -l '"ethernet-phy"'` Signed-off-by: Grant Likely <grant.likely@linaro.org> Acked-by: Srinivas Kandagatla <srinivas.kandagatla@st.com> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: Kumar Gala <galak@codeaurora.org> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-01-12powerpc/512x: dts: add MPC5125 clock specsGerhard Sittig1-1/+52
add clock related specs to the MPC5125 "tower" board DTS - add clock providers (crystal/oscillator, clock control module) - add consumers (the CAN, SDHC, I2C, DIU, FEC, USB, PSC peripherals) Signed-off-by: Gerhard Sittig <gsi@denx.de> Signed-off-by: Anatolij Gustschin <agust@denx.de>
2014-01-12dts: mpc512x: add clock specs for client lookupsGerhard Sittig1-0/+95
this addresses the client side of device tree based clock lookups add clock specifiers to the mbx, nfc, mscan, sdhc, i2c, axe, diu, viu, mdio, fec, usb, pata, psc, psc fifo, and pci nodes in the shared mpc5121.dtsi include Cc: Rob Herring <rob.herring@calxeda.com> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Ian Campbell <ian.campbell@citrix.com> Cc: devicetree@vger.kernel.org Cc: linuxppc-dev@lists.ozlabs.org Reviewed-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Gerhard Sittig <gsi@denx.de> Signed-off-by: Anatolij Gustschin <agust@denx.de>
2014-01-12dts: mpc512x: add clock related device tree specsGerhard Sittig2-1/+24
this addresses the clock driver aka provider's side of clocks - introduce a 'clocks' subtree with an 'osc' node for the crystal or oscillator SoC input (fixed frequency) - the 'clock@f00' clock-control-module node references the 'osc' for its input, and is another provider for all the clocks which the CCM component manages - prepare for future references to clocks from peripheral nodes by means of the <&clks ID> syntax and symbolic ID names which a header file provides - provide default values with 33MHz oscillator frequency in the common include (the 66MHz IPS bus already was there), and add override values for the ifm AC14xx board which deviates from the reference design (25MHz xtal, 80MHz IPS bus) Cc: Rob Herring <rob.herring@calxeda.com> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Ian Campbell <ian.campbell@citrix.com> Cc: linux-arm-kernel@lists.infradead.org Cc: devicetree@vger.kernel.org Reviewed-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Gerhard Sittig <gsi@denx.de> Signed-off-by: Anatolij Gustschin <agust@denx.de>
2014-01-10powerpc/85xx/dts: add third elo3 dma componentShengzhou Liu1-0/+82
Add elo3-dma-2.dtsi to support the third DMA controller. This is used on T2080, T4240, B4860, etc. FSL MPIC v4.3 adds a new discontiguous address range for internal interrupts, e.g. internal interrupt 0 is at offset 0x200 and thus interrupt number is: 0x200 >> 5 = 16 in the device tree. DMA controller 3 channel 0 internal interrupt 240 is at offset 0x3a00, and thus the corresponding interrupt number is: 0x3a00 >> 5 = 464, it's similar for other 7 interrupt numbers of DMA 3 channels. Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> Signed-off-by: Hongbo Zhang <hongbo.zhang@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
2014-01-10powerpc/dts: fix lbc lack of error interruptWang Dongsheng4-4/+8
P1020, P1021, P1022, P1023 when the lbc get error, the error interrupt will be triggered. The corresponding interrupt is internal IRQ0. So system have to process the lbc IRQ0 interrupt. The corresponding lbc general interrupt is internal IRQ3. Signed-off-by: Wang Dongsheng <dongsheng.wang@freescale.com> [scottwood@freescale.com: bracketed individual list elements] Signed-off-by: Scott Wood <scottwood@freescale.com>
2014-01-09powerpc/embedded6xx: Add support for Motorola/Emerson MVME5100Stephen Chivers1-0/+185
Add support for the Motorola/Emerson MVME5100 Single Board Computer. The MVME5100 is a 6U form factor VME64 computer with: - A single MPC7410 or MPC750 CPU - A HAWK Processor Host Bridge (CPU to PCI) and MultiProcessor Interrupt Controller (MPIC) - Up to 500Mb of onboard memory - A M48T37 Real Time Clock (RTC) and Non-Volatile Memory chip - Two 16550 compatible UARTS - Two Intel E100 Fast Ethernets - Two PCI Mezzanine Card (PMC) Slots - PPCBug Firmware The HAWK PHB/MPIC is compatible with the MPC10x devices. There is no onboard disk support. This is usually provided by installing a PMC in first PMC slot. This patch revives the board support, it was present in early 2.6 series kernels. The board support in those days was by Matt Porter of MontaVista Software. CSC Australia has around 31 of these boards in service. The kernel in use for the boards is based on 2.6.31. The boards are operated without disks from a file server. This patch is based on linux-3.13-rc2 and has been boot tested. Only boards with 512 Mb of memory are known to work. Signed-off-by: Stephen Chivers <schivers@csc.com> Tested-by: Alessio Igor Bogani <alessio.bogani@elettra.eu> Signed-off-by: Scott Wood <scottwood@freescale.com>
2014-01-09powerpc/p1022ds: add a interrupt for rtc nodeWang Dongsheng1-0/+1
Add an external interrupt for rtc node. Signed-off-by: Wang Dongsheng <dongsheng.wang@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
2014-01-09powerpc/p1022ds: fix rtc compatible stringWang Dongsheng1-1/+1
RTC Hardware(ds3232) and rtc compatible string does not match. Change "dallas,ds1339" to "dallas,ds3232". Signed-off-by: Wang Dongsheng <dongsheng.wang@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
2014-01-07powerpc/p1010rdb-pa: modify phy interrupt.Zhao Qiang1-2/+2
It is not correct according to p1010rdb-pa user guide. So modify it. Signed-off-by: Zhao Qiang <B45475@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
2014-01-07powerpc/85xx: Add TWR-P1025 board supportXie Xiaobo2-0/+375
TWR-P1025 Overview ----------------- 512Mbyte DDR3 (on board DDR) 64MB Nor Flash eTSEC1: Connected to RGMII PHY AR8035 eTSEC3: Connected to RGMII PHY AR8035 Two USB2.0 Type A One microSD Card slot One mini-PCIe slot One mini-USB TypeB dual UART Signed-off-by: Michael Johnston <michael.johnston@freescale.com> Signed-off-by: Xie Xiaobo <X.Xie@freescale.com> [scottwood@freescale.com: use pr_info rather than KERN_INFO] Signed-off-by: Scott Wood <scottwood@freescale.com>
2014-01-07powerpc/p1010rdb:update mtd of nand to adapt to both old and new p1010rdbZhao Qiang4-65/+88
P1010rdb-pa and p1010rdb-pb have different mtd of nand. So update dts to adapt to both p1010rdb-pa and p1010rdb-pb. Move the nand-mtd from p1010rdb.dtsi to p1010rdb-pa*.dts. Remove nand-mtd for p1010rdb-pb, whick will use mtdparts from u-boot instead of nand-mtd in device tree. Signed-off-by: Zhao Qiang <B45475@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
2014-01-07powerpc/p1010rdb:update dts to adapt to both old and new p1010rdbZhao Qiang8-111/+297
P1010rdb-pa and p1010rdb-pb have different phy interrupts. So update dts to adapt to both p1010rdb-pa and p1010rdb-pb. Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> Signed-off-by: Zhao Qiang <B45475@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
2013-12-30Merge branch 'merge' into nextBenjamin Herrenschmidt2-2/+5
Merge a pile of fixes that went into the "merge" branch (3.13-rc's) such as Anton Little Endian fixes. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-12-20powerpc/512x: dts: disable MPC5125 usb moduleMatteo Facchinetti1-0/+5
At the moment the USB controller's pin muxing is not setup correctly and causes a kernel panic upon system startup, so disable the USB1 device tree node in the MPC5125 tower board dts file. The USB controller is connected to an USB3320 ULPI transceiver and the device tree should receive an update to reflect correct dependencies and required initialization data before the USB1 node can get re-enabled. Signed-off-by: Matteo Facchinetti <matteo.facchinetti@sirius-es.it> Signed-off-by: Anatolij Gustschin <agust@denx.de>
2013-12-18powerpc/512x: dts: remove misplaced IRQ spec from 'soc' node (5125)Gerhard Sittig1-1/+0
the 'soc' node in the MPC5125 "tower" board .dts has an '#interrupt-cells' property although this node is not an interrupt controller remove this erroneously placed property because starting with v3.13-rc1 lookup and resolution of 'interrupts' specs for peripherals gets misled (tries to use the 'soc' as the interrupt parent which fails), emits 'no irq domain found' WARN() messages and breaks the boot process [ best viewed with 'git diff -U5' to have DT node names in the context ] Cc: Anatolij Gustschin <agust@denx.de> Cc: linuxppc-dev@lists.ozlabs.org Cc: devicetree@vger.kernel.org Signed-off-by: Gerhard Sittig <gsi@denx.de> Signed-off-by: Anatolij Gustschin <agust@denx.de>
2013-12-07powerpc/512x: dts: remove misplaced IRQ spec from 'soc' nodeGerhard Sittig1-1/+0
the 'soc' node in the common .dtsi for MPC5121 has an '#interrupt-cells' property although this node is not an interrupt controller remove this erroneously placed property because starting with v3.13-rc1 lookup and resolution of 'interrupts' specs for peripherals gets misled, emits 'no irq domain found' WARN() messages and breaks the boot process irq: no irq domain found for /soc@80000000 ! ------------[ cut here ]------------ WARNING: at drivers/of/platform.c:171 Modules linked in: CPU: 0 PID: 1 Comm: swapper Tainted: G W 3.13.0-rc1-00001-g8a66234 #8 task: df823bb0 ti: df834000 task.ti: df834000 NIP: c02b5190 LR: c02b5180 CTR: c01cf4e0 REGS: df835c50 TRAP: 0700 Tainted: G W (3.13.0-rc1-00001-g8a66234) MSR: 00029032 <EE,ME,IR,DR,RI> CR: 229a9d42 XER: 20000000 GPR00: c02b5180 df835d00 df823bb0 00000000 00000000 df835b18 ffffffff 00000308 GPR08: c0479cc0 c0480000 c0479cc0 00000308 00000308 00000000 c00040fc 00000000 GPR16: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 df850880 GPR24: df84d670 00000000 00000001 df8561a0 dffffccc df85089c 00000020 00000001 NIP [c02b5190] of_device_alloc+0xf4/0x1a0 LR [c02b5180] of_device_alloc+0xe4/0x1a0 Call Trace: [df835d00] [c02b5180] of_device_alloc+0xe4/0x1a0 (unreliable) [df835d50] [c02b5278] of_platform_device_create_pdata+0x3c/0xc8 [df835d70] [c02b53fc] of_platform_bus_create+0xf8/0x170 [df835dc0] [c02b5448] of_platform_bus_create+0x144/0x170 [df835e10] [c02b55a8] of_platform_bus_probe+0x98/0xe8 [df835e30] [c0437508] mpc512x_init+0x28/0x1c4 [df835e70] [c0435de8] ppc_init+0x4c/0x60 [df835e80] [c0003b28] do_one_initcall+0x150/0x1a4 [df835ef0] [c0432048] kernel_init_freeable+0x114/0x1c0 [df835f30] [c0004114] kernel_init+0x18/0x124 [df835f40] [c000e910] ret_from_kernel_thread+0x5c/0x64 Instruction dump: 409effd4 57c9103a 57de2834 7c89f050 7f83e378 7c972214 7f45d378 48001f55 7c63d278 7c630034 5463d97e 687a0001 <0f1a0000> 2f990000 387b0010 939b0098 ---[ end trace 2257f10e5a20cbdd ]--- ... irq: no irq domain found for /soc@80000000 ! fsl-diu-fb 80002100.display: could not get DIU IRQ fsl-diu-fb: probe of 80002100.display failed with error -22 irq: no irq domain found for /soc@80000000 ! mpc512x_dma 80014000.dma: Error mapping IRQ! mpc512x_dma: probe of 80014000.dma failed with error -22 ... irq: no irq domain found for /soc@80000000 ! fs_enet: probe of 80002800.ethernet failed with error -22 ... irq: no irq domain found for /soc@80000000 ! mpc5121-rtc 80000a00.rtc: mpc5121_rtc_probe: could not request irq: 0 mpc5121-rtc: probe of 80000a00.rtc failed with error -22 ... Cc: Anatolij Gustschin <agust@denx.de> Cc: linuxppc-dev@lists.ozlabs.org Cc: devicetree@vger.kernel.org Signed-off-by: Gerhard Sittig <gsi@denx.de> Signed-off-by: Anatolij Gustschin <agust@denx.de>
2013-12-02powerpc/dts/virtex440: Declare address/size-cells for phy deviceIan Campbell1-0/+2
This fixes a warning: DTC arch/powerpc/boot/virtex440-ml507.dtb Warning (reg_format): "reg" property in /plb@0/xps-ll-temac@81c00000/ethernet@81c00000/phy@7 has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1) Warning (avoid_default_addr_size): Relying on default #address-cells value for /plb@0/xps-ll-temac@81c00000/ethernet@81c00000/phy@7 Warning (avoid_default_addr_size): Relying on default #size-cells value for /plb@0/xps-ll-temac@81c00000/ethernet@81c00000/phy@7 Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Gernot Vormayr <gvormayr@gmail.com> Cc: devicetree@vger.kernel.org Cc: linuxppc-dev@lists.ozlabs.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-12-02powerpc/4xx: Fix warning in kilauea.dtbIan Campbell1-1/+1
Currently I see: DTC arch/powerpc/boot/kilauea.dtb Warning (reg_format): "reg" property in /plb/ppc4xx-msi@C10000000 has invalid length (12 bytes) (#address-cells == 1, #size-cells == 1) It appears that unlike the other platforms handled by 3fb7933850fa "powerpc/4xx: Adding PCIe MSI support" this platform does not use address-cells=2. Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Acked-by: Josh Boyer <jwboyer@gmail.com> Cc: Rupjyoti Sarmah <rsarmah@apm.com> Cc: Tirumala R Marri <tmarri@apm.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: devicetree@vger.kernel.org (open list:OPEN FIRMWARE AND...) Cc: linuxppc-dev@lists.ozlabs.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-11-22powerpc/85xx: typo in dts: "interupt" (four devices)Adam Borowski4-8/+8
These lines were inoperative for four years, which puts some doubt into their importance, and it's possible the fixed version will regress, but at the very least they should be removed instead. Signed-off-by: Adam Borowski <kilobyte@angband.pl> Signed-off-by: Scott Wood <scottwood@freescale.com>
2013-11-20Merge branch 'next' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds4-4/+168
Pull slave-dmaengine changes from Vinod Koul: "This brings for slave dmaengine: - Change dma notification flag to DMA_COMPLETE from DMA_SUCCESS as dmaengine can only transfer and not verify validaty of dma transfers - Bunch of fixes across drivers: - cppi41 driver fixes from Daniel - 8 channel freescale dma engine support and updated bindings from Hongbo - msx-dma fixes and cleanup by Markus - DMAengine updates from Dan: - Bartlomiej and Dan finalized a rework of the dma address unmap implementation. - In the course of testing 1/ a collection of enhancements to dmatest fell out. Notably basic performance statistics, and fixed / enhanced test control through new module parameters 'run', 'wait', 'noverify', and 'verbose'. Thanks to Andriy and Linus [Walleij] for their review. - Testing the raid related corner cases of 1/ triggered bugs in the recently added 16-source operation support in the ioatdma driver. - Some minor fixes / cleanups to mv_xor and ioatdma" * 'next' of git://git.infradead.org/users/vkoul/slave-dma: (99 commits) dma: mv_xor: Fix mis-usage of mmio 'base' and 'high_base' registers dma: mv_xor: Remove unneeded NULL address check ioat: fix ioat3_irq_reinit ioat: kill msix_single_vector support raid6test: add new corner case for ioatdma driver ioatdma: clean up sed pool kmem_cache ioatdma: fix selection of 16 vs 8 source path ioatdma: fix sed pool selection ioatdma: Fix bug in selftest after removal of DMA_MEMSET. dmatest: verbose mode dmatest: convert to dmaengine_unmap_data dmatest: add a 'wait' parameter dmatest: add basic performance metrics dmatest: add support for skipping verification and random data setup dmatest: use pseudo random numbers dmatest: support xor-only, or pq-only channels in tests dmatest: restore ability to start test at module load and init dmatest: cleanup redundant "dmatest: " prefixes dmatest: replace stored results mechanism, with uniform messages Revert "dmatest: append verify result to results" ...
2013-11-13DMA: Freescale: Add new 8-channel DMA engine device tree nodesHongbo Zhang4-4/+168
Freescale QorIQ T4 and B4 introduce new 8-channel DMA engines, this patch adds the device tree nodes for them. Signed-off-by: Hongbo Zhang <hongbo.zhang@freescale.com> Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-10-28powerpc/dts/c293pcie: Add range field for IFC NANDPrabhakar Kushwaha1-0/+1
C290PCIe has NAND flash present on IFC Chip Select(CS) 1. So Add "ranges" field for NAND flash on CS1. Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
2013-10-28powerpc/b4860emu: Add device tree file for b4860emuYork Sun1-0/+218
B4860EMU is a emualtor target with minimum peripherals. It is based on B4860QDS and trimmed down most peripherals due to either not modeled or lack of board level connections. The main purpose of this minimum dts is to speed up booting on emulator. Signed-off-by: York Sun <yorksun@freescale.com> [scottwood@freescale.com: whitespace fix] Signed-off-by: Scott Wood <scottwood@freescale.com>
2013-10-28powerpc/t4240emu: Add device tree file for t4240emuYork Sun1-0/+268
T4240EMU is an emulator target with minimum peripherals. It is based on T4240QDS and trimmed down most peripherals due to either not modeled or lack of board level connections. The main purpose of this minimum dts is to speed up booting on emulator. Signed-off-by: York Sun <yorksun@freescale.com> [scottwood@freescale.com: whitespace fixes] Signed-off-by: Scott Wood <scottwood@freescale.com>
2013-10-28powerpc: Add I2C bus multiplexer node for B4 and T4240QDSHongtao Jia2-47/+73
In both B4 and T4240QDS platform PCA9547 I2C bus multiplexer is used. The sub-nodes are also reorganized according to right I2C topology. Signed-off-by: Jia Hongtao <hongtao.jia@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
2013-10-28powerpc/dts: Correct sdhci quirk for bsc9131Haijun.Zhang1-1/+1
We use property "sdhci,auto-cmd12" instead of "fsl,sdhci-auto-cmd12" to distinguish if the sdhc host has quirk SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12. Signed-off-by: Haijun Zhang <Haijun.Zhang@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
2013-10-28powerpc/eSDCH: Specify voltage for T4240QDSHaijun.Zhang1-0/+4
Freescale T4240QDS reference board has extra voltage shifters added to allow 3.3V operation, so add 3.3v voltage support for T4240QDS. 1.8v and 3.3v is recommand for eMMC and SDHC card. Signed-off-by: Haijun Zhang <haijun.zhang@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
2013-10-28powerpc/e500v2: Include Power ISA propertiesLijun Pan1-0/+3
bsc9131 device tree does not have these properties. Signed-off-by: Lijun Pan <Lijun.Pan@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
2013-10-28powerpc/e6500: Include Power ISA propertiesLijun Pan2-0/+4
b4420 and b4860 device trees do not have these properties. Signed-off-by: Lijun Pan <Lijun.Pan@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
2013-10-28powerpc/dts: fix sRIO error interrupt for b4860Minghuan Lian1-1/+1
For B4 platform, MPIC EISR register is in reversed bitmap order, instead of "Error interrupt source 0-31. Bit 0 represents SRC0." the correct ordering is "Error interrupt source 0-31. Bit 0 represents SRC31." This patch is to fix sRIO EISR bit value of error interrupt in dts node. Signed-off-by: Minghuan Lian <Minghuan.Lian@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
2013-09-05Merge remote-tracking branch 'agust/next' into nextBenjamin Herrenschmidt4-3/+4
From Anatolij: << There are cleanups for some mpc5121 specific drivers and DTS files in preparation to switch mpc5121 clock support to a clock driver based on common clock framework. Additionally Sebastian fixed the mpc52xx PIC driver so that it builds when using older gcc versions. >>
2013-08-23powerpc/85xx: Add C293PCIE board supportMingkai Hu1-0/+223
C293PCIE board is a series of Freescale PCIe add-in cards to perform as public key crypto accelerator or secure key management module. - 512KB platform SRAM in addition to 512K L2 Cache/SRAM - 512MB soldered DDR3 32bit memory - CPLD System Logic - 64MB x16 NOR flash and 4GB x8 NAND flash - 16MB SPI flash Signed-off-by: Mingkai Hu <Mingkai.Hu@freescale.com> Signed-off-by: Po Liu <Po.Liu@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
2013-08-23powerpc/85xx: Add silicon device tree for C293Mingkai Hu2-0/+256
Signed-off-by: Mingkai Hu <Mingkai.Hu@freescale.com> Signed-off-by: Po Liu <Po.Liu@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
2013-08-23powerpc/85xx: Add SEC6.0 device treeMingkai Hu1-0/+56
Add device tree for SEC 6.0 used on C29x silicon. Signed-off-by: Mingkai Hu <Mingkai.Hu@freescale.com> Signed-off-by: Po Liu <Po.Liu@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
2013-08-23powerpc/85xx: Add P1023RDB board supportChunhe Lan1-0/+234
P1023RDB Specification: ----------------------- Memory subsystem: 512MB DDR3 (Fixed DDR on board) 64MB NOR flash 128MB NAND flash Ethernet: eTSEC1: Connected to Atheros AR8035 GETH PHY eTSEC2: Connected to Atheros AR8035 GETH PHY PCIe: Three mini-PCIe slots USB: Two USB2.0 Type A ports I2C: AT24C08 8K Board EEPROM (8 bit address) Signed-off-by: Chunhe Lan <Chunhe.Lan@freescale.com> Cc: Scott Wood <scottwood@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
2013-08-24dts: mpc512x: prepare for preprocessor supportGerhard Sittig4-3/+4
prepare C preprocessor support when processing MPC512x DTS files - switch from DTS syntax to CPP syntax for include specs - create a symlink such that DTS processing can reference includes Signed-off-by: Gerhard Sittig <gsi@denx.de> Signed-off-by: Anatolij Gustschin <agust@denx.de>
2013-08-07powerpc/85xx: add the P1020RDB-PD DTS supportHaijun.Zhang1-0/+280
Overview of P1020RDB-PD device: - DDR3 2GB - NOR flash 64MB - NAND flash 128MB - SPI flash 16MB - I2C EEPROM 256Kb - eTSEC1 (RGMII PHY) connected to VSC7385 L2 switch - eTSEC2 (SGMII PHY) - eTSEC3 (RGMII PHY) - SDHC - 1 USB ports - TDM ports - PCIe Signed-off-by: Haijun Zhang <Haijun.Zhang@freescale.com> Signed-off-by: Jerry Huang <Chang-Ming.Huang@freescale.com> Signed-off-by: Xie Xiaobo-R63061 <X.Xie@freescale.com> CC: Scott Wood <scottwood@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
2013-08-07powerpc/dts: add MPIC v4.3 dts nodeMinghuan Lian3-2/+151
For the latest platform T4 and B4, MPIC controller has been updated to v4.3. This patch adds a new file to describe the latest MPIC. The MSI blocks number is increased to four, the registers number of each block is increased to sixteen. MSIIR1 has been added to access these sixteen MSI registers. Signed-off-by: Minghuan Lian <Minghuan.Lian@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
2013-08-07powerpc/fsl-booke: Rename b4qds.dts -> b4qds.dtsi.Ian Campbell3-2/+2
This file is a common include for B4860 and B4420 but is not a valid DTS itself: DTC arch/powerpc/boot/b4qds.dtb Error: arch/powerpc/boot/dts/b4qds.dts:35.1-2 syntax error FATAL ERROR: Unable to parse input tree make[1]: *** [arch/powerpc/boot/b4qds.dtb] Error 1 make: *** [b4qds.dtb] Error 2 I spotted in build tests of device-tree.git, announcement https://lkml.org/lkml/2013/4/24/209, which builds *.dts. Probably no one would do this this in real life on linux.git but it still seems worth fixing. Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Cc: Shaveta Leekha <shaveta@freescale.com> Cc: Minghuan Lian <Minghuan.Lian@freescale.com> Cc: Andy Fleming <afleming@freescale.com> Cc: Poonam Aggrwal <poonam.aggrwal@freescale.com> Cc: Ramneek Mehresh <ramneek.mehresh@freescale.com> Cc: Kumar Gala <galak@kernel.crashing.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: linuxppc-dev@lists.ozlabs.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Scott Wood <scottwood@freescale.com>
2013-06-24powerpc: Add T4 LAC device tree binding & defsJoe Liccese2-0/+201
The Interlaken is a narrow, high speed channelized chip-to-chip interface. To facilitate interoperability between a data path device and a look-aside co-processor, the Interlaken Look-Aside protocol is defined for short transaction-related transfers. Although based on the Interlaken protocol, Interlaken Look-Aside is not directly compatible with Interlaken and can be considered a different operation mode. The Interlaken LA controller connects internal platform to Interlaken serial interface. It accepts LA command through software portals, which are system memory mapped 4KB spaces. The LA commands are then translated into the Interlaken control words and data words, which are sent on TX side to TCAM through SerDes lanes. Signed-off-by: Joe Liccese <joe.liccese@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
2013-06-20powerpc: Update currituck pci/usb fixup for new board revisionAlistair Popple1-0/+5
The currituck board uses a different IRQ for the pci usb host controller depending on the board revision. This patch adds support for newer board revisions by retrieving the board revision from the FPGA and mapping the appropriate IRQ. Signed-off-by: Alistair Popple <alistair@popple.id.au> Acked-by: Tony Breeds <tony@bakeyournoodle.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-05-04Merge tag 'mmc-updates-for-3.10-rc1' of ↵Linus Torvalds1-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc Pull MMC update from Chris Ball: "MMC highlights for 3.10: Core: - Introduce MMC_CAP2_NO_PRESCAN_POWERUP to allow skipping mmc_power_up() at boot/initialization time if it's already happened, for performance (faster boot time) reasons. - Fix a bit width test failure that resulted in old eMMC cards being put into 1-bit mode when 4-bit mode was available. - Expose fwrev/hwrev for MMCv4 parts. - Improve card removal logic in the case where the card's removed slowly; we were missing card removal events if the card retained contact with the slot pads for long enough to reply to a CMD13 while being removed. Drivers: - davinci_mmc: Support using PIO instead of DMA. - dw_mmc: Add support for Exynos4412. - mxcmmc: DT support, use slot-gpio API. - mxs-mmc: Add broken-cd/cd-inverted/non-removable DT property support. - sdhci-sirf: New sdhci-pltfm driver for CSR SiRF SoCs: SiRFprimaII: unicore ARM Cortex-A9 SiRFatlas6: unicore ARM Cortex-A9 SiRFmarco: dual core ARM Cortex-A9 SMP - sdhci-tegra: Add support for Tegra114 platforms, use mmc_of_parse()" * tag 'mmc-updates-for-3.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: (66 commits) mmc: sdhci-tegra: fix MODULE_DEVICE_TABLE mmc: core: fix init controller performance regression, updated patch mmc: mxcmmc: enable DMA support on mpc512x mmc: mxcmmc: constify mxcmci_devtype mmc: mxcmmc: use slot-gpio API for write-protect detection mmc: mxcmmc: add mpc512x SDHC support mmc: mxcmmc: fix race conditions for host->req and host->data access mmc: mxcmmc: DT support mmc: dw_mmc: let device core setup the default pin configuration mmc: mxs-mmc: add broken-cd property mmc: mxs-mmc: add non-removable property mmc: mxs-mmc: add cd-inverted property mmc: core: call pm_runtime_put_noidle in pm_runtime_get_sync failed case mmc: mxcmmc: Fix bug when card is present during boot mmc: core: fix performance regression initializing MMC host controllers Revert "mmc: core: wait while adding MMC host to ensure root mounts successfully" mmc: atmel-mci: pio hang on block errors mmc: core: Fix bit width test failing on old eMMC cards mmc: dw_mmc: Use pr_info instead of printk mmc: dw_mmc: Check return value of regulator_enable ...
2013-04-30Merge remote-tracking branch 'kumar/next' into nextBenjamin Herrenschmidt33-23/+2130
From Kumar Gala: << Add support for T4 and B4 SoC families from Freescale, e6500 altivec support, some various board fixes and other minor cleanups. >>
generated by cgit v1.2.3 (git 2.39.1) at 2024-08-29 16:57:12 +0000