summaryrefslogtreecommitdiffstats
path: root/arch/parisc
AgeCommit message (Collapse)AuthorFilesLines
2022-05-08Revert "parisc: Increase parisc_cache_flush_threshold setting"Helge Deller1-15/+3
This reverts commit a58e9d0984e8dad53f17ec73ae3c1cc7f8d88151. Triggers segfaults with 32-bit kernels on PA8500 machines. Signed-off-by: Helge Deller <deller@gmx.de>
2022-05-08parisc: Mark cr16 clock unstable on all SMP machinesHelge Deller1-23/+4
The cr16 interval timers are not synchronized across CPUs, even with just one dual-core CPU. This becomes visible if the machines have a longer uptime. Signed-off-by: Helge Deller <deller@gmx.de>
2022-05-08parisc: Fix typos in commentsJulia Lawall6-6/+6
Various spelling mistakes in comments. Detected with the help of Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr> Signed-off-by: Helge Deller <deller@gmx.de>
2022-05-08parisc: Change MAX_ADDRESS to become unsigned long longHelge Deller1-1/+1
Dave noticed that for the 32-bit kernel MAX_ADDRESS should be a ULL, otherwise this define would become 0: MAX_ADDRESS (1UL << MAX_ADDRBITS) It has no real effect on the kernel. Signed-off-by: Helge Deller <deller@gmx.de> Noticed-by: John David Anglin <dave.anglin@bell.net>
2022-05-08parisc: Merge model and model name into one line in /proc/cpuinfoHelge Deller1-2/+1
The Linux tool "lscpu" shows the double amount of CPUs if we have "model" and "model name" in two different lines in /proc/cpuinfo. This change combines the model and the model name into one line. Signed-off-by: Helge Deller <deller@gmx.de> Cc: stable@vger.kernel.org
2022-05-08parisc: Re-enable GENERIC_CPU_DEVICES for !SMPHelge Deller1-0/+1
In commit 62773112acc5 ("parisc: Switch from GENERIC_CPU_DEVICES to GENERIC_ARCH_TOPOLOGY") GENERIC_CPU_DEVICES was unconditionally turned off, but this triggers a warning in topology_add_dev(). Turning it back on for the !SMP case avoids this warning. Reported-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Guenter Roeck <linux@roeck-us.net> Fixes: 62773112acc5 ("parisc: Switch from GENERIC_CPU_DEVICES to GENERIC_ARCH_TOPOLOGY") Signed-off-by: Helge Deller <deller@gmx.de>
2022-05-08parisc: Update 32- and 64-bit defconfigsHelge Deller2-2/+5
Enable CONFIG_CGROUPS=y on 32-bit defconfig for systemd-support, and enable CONFIG_NAMESPACES and CONFIG_USER_NS. Signed-off-by: Helge Deller <deller@gmx.de>
2022-05-08parisc: Only list existing CPUs in cpu_possible_maskHelge Deller1-0/+8
The inventory knows which CPUs are in the system, so this bitmask should be in cpu_possible_mask instead of the bitmask based on CONFIG_NR_CPUS. Reset the cpu_possible_mask before scanning the system for CPUs, and mark each existing CPU as possible during initialization of that CPU. This avoids those warnings later on too: register_cpu_capacity_sysctl: too early to get CPU4 device! Signed-off-by: Helge Deller <deller@gmx.de> Noticed-by: John David Anglin <dave.anglin@bell.net>
2022-05-08Revert "parisc: Fix patch code locking and flushing"Helge Deller1-11/+14
This reverts commit a9fe7fa7d874a536e0540469f314772c054a0323. Leads to segfaults on 32bit kernel. Signed-off-by: Helge Deller <deller@gmx.de>
2022-05-08Revert "parisc: Mark sched_clock unstable only if clocks are not syncronized"Helge Deller2-3/+6
This reverts commit d97180ad68bdb7ee10f327205a649bc2f558741d. It triggers RCU stalls at boot with a 32-bit kernel. Signed-off-by: Helge Deller <deller@gmx.de> Noticed-by: John David Anglin <dave.anglin@bell.net> Cc: stable@vger.kernel.org # v5.15+
2022-05-08Revert "parisc: Mark cr16 CPU clocksource unstable on all SMP machines"Helge Deller1-8/+22
This reverts commit afdb4a5b1d340e4afffc65daa21cc71890d7d589. It triggers RCU stalls at boot with a 32-bit kernel. Signed-off-by: Helge Deller <deller@gmx.de> Noticed-by: John David Anglin <dave.anglin@bell.net> Cc: stable@vger.kernel.org # v5.16+
2022-03-31Merge tag 'kbuild-v5.18-v2' of ↵Linus Torvalds1-2/+1
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild updates from Masahiro Yamada: - Add new environment variables, USERCFLAGS and USERLDFLAGS to allow additional flags to be passed to user-space programs. - Fix missing fflush() bugs in Kconfig and fixdep - Fix a minor bug in the comment format of the .config file - Make kallsyms ignore llvm's local labels, .L* - Fix UAPI compile-test for cross-compiling with Clang - Extend the LLVM= syntax to support LLVM=<suffix> form for using a particular version of LLVm, and LLVM=<prefix> form for using custom LLVM in a particular directory path. - Clean up Makefiles * tag 'kbuild-v5.18-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kbuild: Make $(LLVM) more flexible kbuild: add --target to correctly cross-compile UAPI headers with Clang fixdep: use fflush() and ferror() to ensure successful write to files arch: syscalls: simplify uapi/kapi directory creation usr/include: replace extra-y with always-y certs: simplify empty certs creation in certs/Makefile certs: include certs/signing_key.x509 unconditionally kallsyms: ignore all local labels prefixed by '.L' kconfig: fix missing '# end of' for empty menu kconfig: add fflush() before ferror() check kbuild: replace $(if A,A,B) with $(or A,B) kbuild: Add environment variables for userprogs flags kbuild: unify cmd_copy and cmd_shipped
2022-03-31arch: syscalls: simplify uapi/kapi directory creationMasahiro Yamada1-2/+1
$(shell ...) expands to empty. There is no need to assign it to _dummy. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
2022-03-30Merge tag 'for-5.18/parisc-2' of ↵Linus Torvalds20-190/+241
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pull more parisc architecture updates from Helge Deller: - Revert a patch to the invalidate/flush vmap routines which broke kernel patching functions on older PA-RISC machines. - Fix the kernel patching code wrt locking and flushing. Works now on B160L machine as well. - Fix CPU IRQ affinity for LASI, WAX and Dino chips - Add CPU hotplug support - Detect the hppa-suse-linux-gcc compiler when cross-compiling * tag 'for-5.18/parisc-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: Fix patch code locking and flushing parisc: Find a new timesync master if current CPU is removed parisc: Move common_stext into .text section when CONFIG_HOTPLUG_CPU=y parisc: Rewrite arch_cpu_idle_dead() for CPU hotplugging parisc: Implement __cpu_die() and __cpu_disable() for CPU hotplugging parisc: Add PDC locking functions for rendezvous code parisc: Move disable_sr_hashing_asm() into .text section parisc: Move CPU startup-related functions into .text section parisc: Move store_cpu_topology() into text section parisc: Switch from GENERIC_CPU_DEVICES to GENERIC_ARCH_TOPOLOGY parisc: Ensure set_firmware_width() is called only once parisc: Add constants for control registers and clean up mfctl() parisc: Detect hppa-suse-linux-gcc compiler for cross-building parisc: Clean up cpu_check_affinity() and drop cpu_set_affinity_irq() parisc: Fix CPU affinity for Lasi, WAX and Dino chips Revert "parisc: Fix invalidate/flush vmap routines"
2022-03-29parisc: Fix patch code locking and flushingJohn David Anglin1-14/+11
This change fixes the following: 1) The flags variable is not initialized. Always use raw_spin_lock_irqsave and raw_spin_unlock_irqrestore to serialize patching. 2) flush_kernel_vmap_range is primarily intended for DMA flushes. Since __patch_text_multiple is often called with interrupts disabled, it is better to directly call flush_kernel_dcache_range_asm and flush_kernel_icache_range_asm. This avoids an extra call. 3) The final call to flush_icache_range is unnecessary. Signed-off-by: John David Anglin <dave.anglin@bell.net> Signed-off-by: Helge Deller <deller@gmx.de>
2022-03-29parisc: Find a new timesync master if current CPU is removedHelge Deller3-1/+10
When CPU hotplugging is enabled, the user may want to remove the current CPU which is providing the timer ticks. If this happens we need to find a new timesync master. Signed-off-by: Helge Deller <deller@gmx.de>
2022-03-29parisc: Move common_stext into .text section when CONFIG_HOTPLUG_CPU=yHelge Deller1-2/+9
Move the common_stext function into the non-init text section if hotplug is enabled. This function is called from the firmware when hotplugged CPUs are brought up. Signed-off-by: Helge Deller <deller@gmx.de>
2022-03-29parisc: Rewrite arch_cpu_idle_dead() for CPU hotpluggingHelge Deller1-3/+24
Let the PDC firmware put the CPU into firmware idle loop with the pdc_cpu_rendezvous() function. Signed-off-by: Helge Deller <deller@gmx.de>
2022-03-29parisc: Implement __cpu_die() and __cpu_disable() for CPU hotpluggingHelge Deller3-22/+90
Add relevant code to __cpu_die() and __cpu_disable() to finally enable the CPU hotplugging features. Reset the irq count values in smp_callin() to zero before bringing up the CPU. It seems that the firmware may need up to 8 seconds to fully stop a CPU in which no other PDC calls are allowed to be made. Use a timeout __cpu_die() to accommodate for this. Use "chcpu -d 1" to bring CPU1 down, and "chcpu -e 1" to bring it up. Signed-off-by: Helge Deller <deller@gmx.de>
2022-03-29parisc: Add PDC locking functions for rendezvous codeHelge Deller3-1/+42
Add pdc_cpu_rendezvous_lock() and pdc_cpu_rendezvous_unlock() to lock PDC while CPU is transitioning into rendezvous state. This is needed, because the transition phase may take up to 8 seconds. Add pdc_pat_get_PDC_entrypoint() to get PDC entry point for current CPU. Signed-off-by: Helge Deller <deller@gmx.de>
2022-03-29parisc: Move disable_sr_hashing_asm() into .text sectionHelge Deller1-1/+1
Signed-off-by: Helge Deller <deller@gmx.de>
2022-03-29parisc: Move CPU startup-related functions into .text sectionHelge Deller4-4/+4
If CONFIG_HOTPLUG_CPU is enabled, those functions will be run again after bootup. So they need to reside in the .text section. Signed-off-by: Helge Deller <deller@gmx.de>
2022-03-29parisc: Move store_cpu_topology() into text sectionHelge Deller1-2/+3
Signed-off-by: Helge Deller <deller@gmx.de>
2022-03-29parisc: Switch from GENERIC_CPU_DEVICES to GENERIC_ARCH_TOPOLOGYHelge Deller5-88/+24
Switch away from the own cpu topology code to common code which is used by ARM64 and RISCV. That will allow us to enable CPU hotplug later on. Signed-off-by: Helge Deller <deller@gmx.de>
2022-03-29parisc: Ensure set_firmware_width() is called only onceHelge Deller1-1/+6
Call set_firmware_width() only once at runtime. This prevents that hotplugged CPUs will get stuck in spinlocks later on. Signed-off-by: Helge Deller <deller@gmx.de>
2022-03-29parisc: Add constants for control registers and clean up mfctl()Helge Deller1-9/+8
Clean up the code for the mfctl() and mtctl() functions and add often used constants. Signed-off-by: Helge Deller <deller@gmx.de>
2022-03-29parisc: Detect hppa-suse-linux-gcc compiler for cross-buildingHelge Deller1-2/+2
Allow the system to find the SUSE hppa compiler and linker to set CROSS32_COMPILE and CROSS_COMPILE. Suggested-by: Jiri Slaby <jirislaby@kernel.org> Signed-off-by: Helge Deller <deller@gmx.de>
2022-03-29parisc: Clean up cpu_check_affinity() and drop cpu_set_affinity_irq()Helge Deller1-21/+2
The cpu_set_affinity_irq() isn't needed. Not the CPU irqs need to change, but the slave irq chips simply need to be reprogrammed to a new CPU irq with the txn_* functions. Signed-off-by: Helge Deller <deller@gmx.de>
2022-03-29Revert "parisc: Fix invalidate/flush vmap routines"Helge Deller1-19/+5
This reverts commit 53d862fac4a09b9c56cca0433fa9de5732fd05a1. It turned out that flush_kernel_vmap_range() is being called with interrupts disabled. There's no way to flush entire cache with interrupts disabled. Signed-off-by: Helge Deller <deller@gmx.de>
2022-03-28Merge tag 'ptrace-cleanups-for-v5.18' of ↵Linus Torvalds2-6/+5
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace Pull ptrace cleanups from Eric Biederman: "This set of changes removes tracehook.h, moves modification of all of the ptrace fields inside of siglock to remove races, adds a missing permission check to ptrace.c The removal of tracehook.h is quite significant as it has been a major source of confusion in recent years. Much of that confusion was around task_work and TIF_NOTIFY_SIGNAL (which I have now decoupled making the semantics clearer). For people who don't know tracehook.h is a vestiage of an attempt to implement uprobes like functionality that was never fully merged, and was later superseeded by uprobes when uprobes was merged. For many years now we have been removing what tracehook functionaly a little bit at a time. To the point where anything left in tracehook.h was some weird strange thing that was difficult to understand" * tag 'ptrace-cleanups-for-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: ptrace: Remove duplicated include in ptrace.c ptrace: Check PTRACE_O_SUSPEND_SECCOMP permission on PTRACE_SEIZE ptrace: Return the signal to continue with from ptrace_stop ptrace: Move setting/clearing ptrace_message into ptrace_stop tracehook: Remove tracehook.h resume_user_mode: Move to resume_user_mode.h resume_user_mode: Remove #ifdef TIF_NOTIFY_RESUME in set_notify_resume signal: Move set_notify_signal and clear_notify_signal into sched/signal.h task_work: Decouple TIF_NOTIFY_SIGNAL and task_work task_work: Call tracehook_notify_signal from get_signal on all architectures task_work: Introduce task_work_pending task_work: Remove unnecessary include from posix_timers.h ptrace: Remove tracehook_signal_handler ptrace: Remove arch_syscall_{enter,exit}_tracehook ptrace: Create ptrace_report_syscall_{entry,exit} in ptrace.h ptrace/arm: Rename tracehook_report_syscall report_syscall ptrace: Move ptrace_report_syscall into ptrace.h
2022-03-25Merge branch 'akpm' (patches from Andrew)Linus Torvalds1-0/+2
Merge yet more updates from Andrew Morton: "This is the material which was staged after willystuff in linux-next. Subsystems affected by this patch series: mm (debug, selftests, pagecache, thp, rmap, migration, kasan, hugetlb, pagemap, madvise), and selftests" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (113 commits) selftests: kselftest framework: provide "finished" helper mm: madvise: MADV_DONTNEED_LOCKED mm: fix race between MADV_FREE reclaim and blkdev direct IO read mm: generalize ARCH_HAS_FILTER_PGPROT mm: unmap_mapping_range_tree() with i_mmap_rwsem shared mm: warn on deleting redirtied only if accounted mm/huge_memory: remove stale locking logic from __split_huge_pmd() mm/huge_memory: remove stale page_trans_huge_mapcount() mm/swapfile: remove stale reuse_swap_page() mm/khugepaged: remove reuse_swap_page() usage mm/huge_memory: streamline COW logic in do_huge_pmd_wp_page() mm: streamline COW logic in do_swap_page() mm: slightly clarify KSM logic in do_swap_page() mm: optimize do_wp_page() for fresh pages in local LRU pagevecs mm: optimize do_wp_page() for exclusive pages in the swapcache mm/huge_memory: make is_transparent_hugepage() static userfaultfd/selftests: enable hugetlb remap and remove event testing selftests/vm: add hugetlb madvise MADV_DONTNEED MADV_REMOVE test mm: enable MADV_DONTNEED for hugetlb mappings kasan: disable LOCKDEP when printing reports ...
2022-03-25Merge tag 'powerpc-5.18-1' of ↵Linus Torvalds3-32/+6
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc updates from Michael Ellerman: "Livepatch support for 32-bit is probably the standout new feature, otherwise mostly just lots of bits and pieces all over the board. There's a series of commits cleaning up function descriptor handling, which touches a few other arches as well as LKDTM. It has acks from Arnd, Kees and Helge. Summary: - Enforce kernel RO, and implement STRICT_MODULE_RWX for 603. - Add support for livepatch to 32-bit. - Implement CONFIG_DYNAMIC_FTRACE_WITH_ARGS. - Merge vdso64 and vdso32 into a single directory. - Fix build errors with newer binutils. - Add support for UADDR64 relocations, which are emitted by some toolchains. This allows powerpc to build with the latest lld. - Fix (another) potential userspace r13 corruption in transactional memory handling. - Cleanups of function descriptor handling & related fixes to LKDTM. Thanks to Abdul Haleem, Alexey Kardashevskiy, Anders Roxell, Aneesh Kumar K.V, Anton Blanchard, Arnd Bergmann, Athira Rajeev, Bhaskar Chowdhury, Cédric Le Goater, Chen Jingwen, Christophe JAILLET, Christophe Leroy, Corentin Labbe, Daniel Axtens, Daniel Henrique Barboza, David Dai, Fabiano Rosas, Ganesh Goudar, Guo Zhengkui, Hangyu Hua, Haren Myneni, Hari Bathini, Igor Zhbanov, Jakob Koschel, Jason Wang, Jeremy Kerr, Joachim Wiberg, Jordan Niethe, Julia Lawall, Kajol Jain, Kees Cook, Laurent Dufour, Madhavan Srinivasan, Mamatha Inamdar, Maxime Bizon, Maxim Kiselev, Maxim Kochetkov, Michal Suchanek, Nageswara R Sastry, Nathan Lynch, Naveen N. Rao, Nicholas Piggin, Nour-eddine Taleb, Paul Menzel, Ping Fang, Pratik R. Sampat, Randy Dunlap, Ritesh Harjani, Rohan McLure, Russell Currey, Sachin Sant, Segher Boessenkool, Shivaprasad G Bhat, Sourabh Jain, Thierry Reding, Tobias Waldekranz, Tyrel Datwyler, Vaibhav Jain, Vladimir Oltean, Wedson Almeida Filho, and YueHaibing" * tag 'powerpc-5.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (179 commits) powerpc/pseries: Fix use after free in remove_phb_dynamic() powerpc/time: improve decrementer clockevent processing powerpc/time: Fix KVM host re-arming a timer beyond decrementer range powerpc/tm: Fix more userspace r13 corruption powerpc/xive: fix return value of __setup handler powerpc/64: Add UADDR64 relocation support powerpc: 8xx: fix a return value error in mpc8xx_pic_init powerpc/ps3: remove unneeded semicolons powerpc/64: Force inlining of prevent_user_access() and set_kuap() powerpc/bitops: Force inlining of fls() powerpc: declare unmodified attribute_group usages const powerpc/spufs: Fix build warning when CONFIG_PROC_FS=n powerpc/secvar: fix refcount leak in format_show() powerpc/64e: Tie PPC_BOOK3E_64 to PPC_FSL_BOOK3E powerpc: Move C prototypes out of asm-prototypes.h powerpc/kexec: Declare kexec_paca static powerpc/smp: Declare current_set static powerpc: Cleanup asm-prototypes.c powerpc/ftrace: Use STK_GOT in ftrace_mprofile.S powerpc/ftrace: Regroup PPC64 specific operations in ftrace_mprofile.S ...
2022-03-24mm: madvise: MADV_DONTNEED_LOCKEDJohannes Weiner1-0/+2
MADV_DONTNEED historically rejects mlocked ranges, but with MLOCK_ONFAULT and MCL_ONFAULT allowing to mlock without populating, there are valid use cases for depopulating locked ranges as well. Users mlock memory to protect secrets. There are allocators for secure buffers that want in-use memory generally mlocked, but cleared and invalidated memory to give up the physical pages. This could be done with explicit munlock -> mlock calls on free -> alloc of course, but that adds two unnecessary syscalls, heavy mmap_sem write locks, vma splits and re-merges - only to get rid of the backing pages. Users also mlockall(MCL_ONFAULT) to suppress sustained paging, but are okay with on-demand initial population. It seems valid to selectively free some memory during the lifetime of such a process, without having to mess with its overall policy. Why add a separate flag? Isn't this a pretty niche usecase? - MADV_DONTNEED has been bailing on locked vmas forever. It's at least conceivable that someone, somewhere is relying on mlock to protect data from perhaps broader invalidation calls. Changing this behavior now could lead to quiet data corruption. - It also clarifies expectations around MADV_FREE and maybe MADV_REMOVE. It avoids the situation where one quietly behaves different than the others. MADV_FREE_LOCKED can be added later. - The combination of mlock() and madvise() in the first place is probably niche. But where it happens, I'd say that dropping pages from a locked region once they don't contain secrets or won't page anymore is much saner than relying on mlock to protect memory from speculative or errant invalidation calls. It's just that we can't change the default behavior because of the two previous points. Given that, an explicit new flag seems to make the most sense. [hannes@cmpxchg.org: fix mips build] Link: https://lkml.kernel.org/r/20220304171912.305060-1-hannes@cmpxchg.org Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Michal Hocko <mhocko@suse.com> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Reviewed-by: Shakeel Butt <shakeelb@google.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Nadav Amit <nadav.amit@gmail.com> Cc: David Hildenbrand <david@redhat.com> Cc: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-24Merge tag 'net-next-5.18' of ↵Linus Torvalds1-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "The sprinkling of SPI drivers is because we added a new one and Mark sent us a SPI driver interface conversion pull request. Core ---- - Introduce XDP multi-buffer support, allowing the use of XDP with jumbo frame MTUs and combination with Rx coalescing offloads (LRO). - Speed up netns dismantling (5x) and lower the memory cost a little. Remove unnecessary per-netns sockets. Scope some lists to a netns. Cut down RCU syncing. Use batch methods. Allow netdev registration to complete out of order. - Support distinguishing timestamp types (ingress vs egress) and maintaining them across packet scrubbing points (e.g. redirect). - Continue the work of annotating packet drop reasons throughout the stack. - Switch netdev error counters from an atomic to dynamically allocated per-CPU counters. - Rework a few preempt_disable(), local_irq_save() and busy waiting sections problematic on PREEMPT_RT. - Extend the ref_tracker to allow catching use-after-free bugs. BPF --- - Introduce "packing allocator" for BPF JIT images. JITed code is marked read only, and used to be allocated at page granularity. Custom allocator allows for more efficient memory use, lower iTLB pressure and prevents identity mapping huge pages from getting split. - Make use of BTF type annotations (e.g. __user, __percpu) to enforce the correct probe read access method, add appropriate helpers. - Convert the BPF preload to use light skeleton and drop the user-mode-driver dependency. - Allow XDP BPF_PROG_RUN test infra to send real packets, enabling its use as a packet generator. - Allow local storage memory to be allocated with GFP_KERNEL if called from a hook allowed to sleep. - Introduce fprobe (multi kprobe) to speed up mass attachment (arch bits to come later). - Add unstable conntrack lookup helpers for BPF by using the BPF kfunc infra. - Allow cgroup BPF progs to return custom errors to user space. - Add support for AF_UNIX iterator batching. - Allow iterator programs to use sleepable helpers. - Support JIT of add, and, or, xor and xchg atomic ops on arm64. - Add BTFGen support to bpftool which allows to use CO-RE in kernels without BTF info. - Large number of libbpf API improvements, cleanups and deprecations. Protocols --------- - Micro-optimize UDPv6 Tx, gaining up to 5% in test on dummy netdev. - Adjust TSO packet sizes based on min_rtt, allowing very low latency links (data centers) to always send full-sized TSO super-frames. - Make IPv6 flow label changes (AKA hash rethink) more configurable, via sysctl and setsockopt. Distinguish between server and client behavior. - VxLAN support to "collect metadata" devices to terminate only configured VNIs. This is similar to VLAN filtering in the bridge. - Support inserting IPv6 IOAM information to a fraction of frames. - Add protocol attribute to IP addresses to allow identifying where given address comes from (kernel-generated, DHCP etc.) - Support setting socket and IPv6 options via cmsg on ping6 sockets. - Reject mis-use of ECN bits in IP headers as part of DSCP/TOS. Define dscp_t and stop taking ECN bits into account in fib-rules. - Add support for locked bridge ports (for 802.1X). - tun: support NAPI for packets received from batched XDP buffs, doubling the performance in some scenarios. - IPv6 extension header handling in Open vSwitch. - Support IPv6 control message load balancing in bonding, prevent neighbor solicitation and advertisement from using the wrong port. Support NS/NA monitor selection similar to existing ARP monitor. - SMC - improve performance with TCP_CORK and sendfile() - support auto-corking - support TCP_NODELAY - MCTP (Management Component Transport Protocol) - add user space tag control interface - I2C binding driver (as specified by DMTF DSP0237) - Multi-BSSID beacon handling in AP mode for WiFi. - Bluetooth: - handle MSFT Monitor Device Event - add MGMT Adv Monitor Device Found/Lost events - Multi-Path TCP: - add support for the SO_SNDTIMEO socket option - lots of selftest cleanups and improvements - Increase the max PDU size in CAN ISOTP to 64 kB. Driver API ---------- - Add HW counters for SW netdevs, a mechanism for devices which offload packet forwarding to report packet statistics back to software interfaces such as tunnels. - Select the default NIC queue count as a fraction of number of physical CPU cores, instead of hard-coding to 8. - Expose devlink instance locks to drivers. Allow device layer of drivers to use that lock directly instead of creating their own which always runs into ordering issues in devlink callbacks. - Add header/data split indication to guide user space enabling of TCP zero-copy Rx. - Allow configuring completion queue event size. - Refactor page_pool to enable fragmenting after allocation. - Add allocation and page reuse statistics to page_pool. - Improve Multiple Spanning Trees support in the bridge to allow reuse of topologies across VLANs, saving HW resources in switches. - DSA (Distributed Switch Architecture): - replay and offload of host VLAN entries - offload of static and local FDB entries on LAG interfaces - FDB isolation and unicast filtering New hardware / drivers ---------------------- - Ethernet: - LAN937x T1 PHYs - Davicom DM9051 SPI NIC driver - Realtek RTL8367S, RTL8367RB-VB switch and MDIO - Microchip ksz8563 switches - Netronome NFP3800 SmartNICs - Fungible SmartNICs - MediaTek MT8195 switches - WiFi: - mt76: MediaTek mt7916 - mt76: MediaTek mt7921u USB adapters - brcmfmac: Broadcom BCM43454/6 - Mobile: - iosm: Intel M.2 7360 WWAN card Drivers ------- - Convert many drivers to the new phylink API built for split PCS designs but also simplifying other cases. - Intel Ethernet NICs: - add TTY for GNSS module for E810T device - improve AF_XDP performance - GTP-C and GTP-U filter offload - QinQ VLAN support - Mellanox Ethernet NICs (mlx5): - support xdp->data_meta - multi-buffer XDP - offload tc push_eth and pop_eth actions - Netronome Ethernet NICs (nfp): - flow-independent tc action hardware offload (police / meter) - AF_XDP - Other Ethernet NICs: - at803x: fiber and SFP support - xgmac: mdio: preamble suppression and custom MDC frequencies - r8169: enable ASPM L1.2 if system vendor flags it as safe - macb/gem: ZynqMP SGMII - hns3: add TX push mode - dpaa2-eth: software TSO - lan743x: multi-queue, mdio, SGMII, PTP - axienet: NAPI and GRO support - Mellanox Ethernet switches (mlxsw): - source and dest IP address rewrites - RJ45 ports - Marvell Ethernet switches (prestera): - basic routing offload - multi-chain TC ACL offload - NXP embedded Ethernet switches (ocelot & felix): - PTP over UDP with the ocelot-8021q DSA tagging protocol - basic QoS classification on Felix DSA switch using dcbnl - port mirroring for ocelot switches - Microchip high-speed industrial Ethernet (sparx5): - offloading of bridge port flooding flags - PTP Hardware Clock - Other embedded switches: - lan966x: PTP Hardward Clock - qca8k: mdio read/write operations via crafted Ethernet packets - Qualcomm 802.11ax WiFi (ath11k): - add LDPC FEC type and 802.11ax High Efficiency data in radiotap - enable RX PPDU stats in monitor co-exist mode - Intel WiFi (iwlwifi): - UHB TAS enablement via BIOS - band disablement via BIOS - channel switch offload - 32 Rx AMPDU sessions in newer devices - MediaTek WiFi (mt76): - background radar detection - thermal management improvements on mt7915 - SAR support for more mt76 platforms - MBSSID and 6 GHz band on mt7915 - RealTek WiFi: - rtw89: AP mode - rtw89: 160 MHz channels and 6 GHz band - rtw89: hardware scan - Bluetooth: - mt7921s: wake on Bluetooth, SCO over I2S, wide-band-speed (WBS) - Microchip CAN (mcp251xfd): - multiple RX-FIFOs and runtime configurable RX/TX rings - internal PLL, runtime PM handling simplification - improve chip detection and error handling after wakeup" * tag 'net-next-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2521 commits) llc: fix netdevice reference leaks in llc_ui_bind() drivers: ethernet: cpsw: fix panic when interrupt coaleceing is set via ethtool ice: don't allow to run ice_send_event_to_aux() in atomic ctx ice: fix 'scheduling while atomic' on aux critical err interrupt net/sched: fix incorrect vlan_push_eth dest field net: bridge: mst: Restrict info size queries to bridge ports net: marvell: prestera: add missing destroy_workqueue() in prestera_module_init() drivers: net: xgene: Fix regression in CRC stripping net: geneve: add missing netlink policy and size for IFLA_GENEVE_INNER_PROTO_INHERIT net: dsa: fix missing host-filtered multicast addresses net/mlx5e: Fix build warning, detected write beyond size of field iwlwifi: mvm: Don't fail if PPAG isn't supported selftests/bpf: Fix kprobe_multi test. Revert "rethook: x86: Add rethook x86 implementation" Revert "arm64: rethook: Add arm64 rethook implementation" Revert "powerpc: Add rethook support" Revert "ARM: rethook: Add rethook arm implementation" netdevice: add missing dm_private kdoc net: bridge: mst: prevent NULL deref in br_mst_info_size() selftests: forwarding: Use same VRF for port and VLAN upper ...
2022-03-23Merge tag 'asm-generic-5.18' of ↵Linus Torvalds6-19/+9
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic Pull asm-generic updates from Arnd Bergmann: "There are three sets of updates for 5.18 in the asm-generic tree: - The set_fs()/get_fs() infrastructure gets removed for good. This was already gone from all major architectures, but now we can finally remove it everywhere, which loses some particularly tricky and error-prone code. There is a small merge conflict against a parisc cleanup, the solution is to use their new version. - The nds32 architecture ends its tenure in the Linux kernel. The hardware is still used and the code is in reasonable shape, but the mainline port is not actively maintained any more, as all remaining users are thought to run vendor kernels that would never be updated to a future release. - A series from Masahiro Yamada cleans up some of the uapi header files to pass the compile-time checks" * tag 'asm-generic-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: (27 commits) nds32: Remove the architecture uaccess: remove CONFIG_SET_FS ia64: remove CONFIG_SET_FS support sh: remove CONFIG_SET_FS support sparc64: remove CONFIG_SET_FS support lib/test_lockup: fix kernel pointer check for separate address spaces uaccess: generalize access_ok() uaccess: fix type mismatch warnings from access_ok() arm64: simplify access_ok() m68k: fix access_ok for coldfire MIPS: use simpler access_ok() MIPS: Handle address errors for accesses above CPU max virtual user address uaccess: add generic __{get,put}_kernel_nofault nios2: drop access_ok() check from __put_user() x86: use more conventional access_ok() definition x86: remove __range_not_ok() sparc64: add __{get,put}_kernel_nofault() nds32: fix access_ok() checks in get/put_user uaccess: fix nios2 and microblaze get_user_8() sparc64: fix building assembly files ...
2022-03-23Merge tag 'for-5.18/fbdev-1' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev Pull fbdev updates from Helge Deller: "Lots of small fixes and code cleanups across most of the fbdev drivers. This includes conversions to use helper functions, const conversions, spelling fixes, help text updates, adding return value checks, small build fixes, and much more" * tag 'for-5.18/fbdev-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev: (59 commits) video: fbdev: kyro: make read-only array ODValues static const video: fbdev: offb: fix warning comparing pointer to 0 video: fbdev: omapfb: Add missing of_node_put() in dvic_probe_of video: fbdev: sm712fb: Fix crash in smtcfb_write() video: fbdev: s3c-fb: fix platform_get_irq.cocci warning video: fbdev: sm712fb: Fix crash in smtcfb_read() video: fbdev: via: check the return value of kstrdup() video: fbdev: au1100fb: Spelling s/palette/palette/ video: fbdev: atari: Atari 2 bpp (STe) palette bugfix video: fbdev: atari: Remove unused atafb_setcolreg() video: fbdev: atari: Convert to standard round_up() helper video: fbdev: atari: Fix TT High video mode video: fbdev: udlfb: replace snprintf in show functions with sysfs_emit video: fbdev: omapfb: panel-tpo-td043mtea1: Use sysfs_emit() instead of snprintf() video: fbdev: omapfb: panel-dsi-cm: Use sysfs_emit() instead of snprintf() video: fbdev: omapfb: Use sysfs_emit() instead of snprintf() video: fbdev: s3c-fb: Use platform_get_irq() to get the interrupt video: fbdev: Fix wrong file path for pvr2fb.c in Kconfig help text video: fbdev: pxa3xx-gcu: Remove unnecessary print function dev_err() video: fbdev: pxa168fb: Remove unnecessary print function dev_err() ...
2022-03-22Merge tag 'folio-5.18c' of git://git.infradead.org/users/willy/pagecacheLinus Torvalds1-0/+1
Pull folio updates from Matthew Wilcox: - Rewrite how munlock works to massively reduce the contention on i_mmap_rwsem (Hugh Dickins): https://lore.kernel.org/linux-mm/8e4356d-9622-a7f0-b2c-f116b5f2efea@google.com/ - Sort out the page refcount mess for ZONE_DEVICE pages (Christoph Hellwig): https://lore.kernel.org/linux-mm/20220210072828.2930359-1-hch@lst.de/ - Convert GUP to use folios and make pincount available for order-1 pages. (Matthew Wilcox) - Convert a few more truncation functions to use folios (Matthew Wilcox) - Convert page_vma_mapped_walk to use PFNs instead of pages (Matthew Wilcox) - Convert rmap_walk to use folios (Matthew Wilcox) - Convert most of shrink_page_list() to use a folio (Matthew Wilcox) - Add support for creating large folios in readahead (Matthew Wilcox) * tag 'folio-5.18c' of git://git.infradead.org/users/willy/pagecache: (114 commits) mm/damon: minor cleanup for damon_pa_young selftests/vm/transhuge-stress: Support file-backed PMD folios mm/filemap: Support VM_HUGEPAGE for file mappings mm/readahead: Switch to page_cache_ra_order mm/readahead: Align file mappings for non-DAX mm/readahead: Add large folio readahead mm: Support arbitrary THP sizes mm: Make large folios depend on THP mm: Fix READ_ONLY_THP warning mm/filemap: Allow large folios to be added to the page cache mm: Turn can_split_huge_page() into can_split_folio() mm/vmscan: Convert pageout() to take a folio mm/vmscan: Turn page_check_references() into folio_check_references() mm/vmscan: Account large folios correctly mm/vmscan: Optimise shrink_page_list for non-PMD-sized folios mm/vmscan: Free non-shmem folios without splitting them mm/rmap: Constify the rmap_walk_control argument mm/rmap: Convert rmap_walk() to take a folio mm: Turn page_anon_vma() into folio_anon_vma() mm/rmap: Turn page_lock_anon_vma_read() into folio_lock_anon_vma_read() ...
2022-03-22Merge tag 'nfsd-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linuxLinus Torvalds1-1/+0
Pull nfsd updates from Chuck Lever: "New features: - NFSv3 support in NFSD is now always built - Added NFSD support for the NFSv4 birth-time file attribute - Added support for storing and displaying sockaddrs in trace points - NFSD now recognizes RPC_AUTH_TLS probes Performance improvements: - Optimized the svc transport enqueuing mechanism - Added micro-optimizations for the duplicate reply cache Notable bug fixes: - Allocation of the NFSD file cache hash table is more reliable" * tag 'nfsd-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux: (30 commits) nfsd: fix using the correct variable for sizeof() nfsd: use correct format characters NFSD: prevent integer overflow on 32 bit systems NFSD: prevent underflow in nfssvc_decode_writeargs() fs/lock: documentation cleanup. Replace inode->i_lock with flc_lock. NFSD: Fix nfsd_breaker_owns_lease() return values NFSD: Clean up _lm_ operation names arch: Remove references to CONFIG_NFSD_V3 in the default configs NFSD: Remove CONFIG_NFSD_V3 nfsd: more robust allocation failure handling in nfsd_file_cache_init SUNRPC: Teach server to recognize RPC_AUTH_TLS NFSD: Move svc_serv_ops::svo_function into struct svc_serv NFSD: Remove svc_serv_ops::svo_module SUNRPC: Remove svc_shutdown_net() SUNRPC: Rename svc_close_xprt() SUNRPC: Rename svc_create_xprt() SUNRPC: Remove svo_shutdown method SUNRPC: Merge svc_do_enqueue_xprt() into svc_enqueue_xprt() SUNRPC: Remove the .svo_enqueue_xprt method SUNRPC: Record endpoint information in trace log ...
2022-03-21arch: Add pmd_pfn() where it is missingMike Rapoport1-0/+1
We need to use this function in common code, so define it for architectures and/or configrations that miss it. The result of pmd_pfn() will only be used if TRANSPARENT_HUGEPAGE is enabled, but a function or macro called pmd_pfn() must be defined, even on machines with two level page tables. Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
2022-03-21parisc: Fix invalidate/flush vmap routinesJohn David Anglin1-5/+19
Cache move-in for virtual accesses is controlled by the TLB. Thus, we must generally purge TLB entries before flushing. The flush routines must use TLB entries that inhibit cache move-in. V2: Load physical address prior to flushing TLB. In flush_cache_page, flush TLB when flushing and purging. V3: Don't flush when start equals end. Signed-off-by: John David Anglin <dave.anglin@bell.net> Signed-off-by: Helge Deller <deller@gmx.de>
2022-03-18parisc: Avoid flushing cache on cache-less machinesHelge Deller1-0/+4
Avoid flushing caches in __flush_cache_page() and __purge_cache_page() if the machine hasn't data or instruction caches - as e.g. in qemu. Signed-off-by: Helge Deller <deller@gmx.de>
2022-03-18parisc: Avoid using hardware single-step in kprobesHelge Deller3-19/+24
This patch changes the kprobe and kretprobe feature to use another break instruction instead of relying on the hardware single-step feature. That way those kprobes now work in qemu as well, because in qemu we don't emulate yet single-stepping. Signed-off-by: Helge Deller <deller@gmx.de>
2022-03-17parisc: Improve CPU socket and core bootup info textHelge Deller1-2/+2
Improve CPU bootup info text from: CPU1: thread -1, cpu 0, socket 1 to CPU1: cpu core 0 of socket 1 Signed-off-by: Helge Deller <deller@gmx.de>
2022-03-17parisc: Enable ARCH_HAS_DEBUG_VM_PGTABLEHelge Deller1-0/+1
Allow to enable page table boot-up checks. Suggested-by: Rolf Eike Beer <eike-kernel@sf-tec.de> Signed-off-by: Helge Deller <deller@gmx.de>
2022-03-16parisc: Avoid calling SMP cache flush functions on cache-less machinesHelge Deller3-34/+40
At least the qemu virtual machine does not provide D- and I-caches, so skip triggering SMP irqs to flush caches on such machines. Further optimize the caching code by using static branches and making some functions static. Signed-off-by: Helge Deller <deller@gmx.de>
2022-03-11parisc: Increase parisc_cache_flush_threshold settingJohn David Anglin1-3/+15
In testing the "Fix non-access data TLB cache flush faults" change, I noticed a significant improvement in glibc build and check times. This led me to investigate the parisc_cache_flush_threshold setting. It determines when we switch from line flushing to whole cache flushing. It turned out that the parisc_cache_flush_threshold setting on mako and mako2 machines (PA8800 and PA8900 processors) was way too small. Adjusting this setting provided almost a factor two improvement in the glibc build and check time. Signed-off-by: John David Anglin <dave.anglin@bell.net> Signed-off-by: Helge Deller <deller@gmx.de>
2022-03-11parisc/unaligned: Enhance user-space visible outputHelge Deller1-26/+10
Userspace is up to now limited to 32-bit, so it's sufficient to print only 32-bit values when showing pointer addresses. Signed-off-by: Helge Deller <deller@gmx.de>
2022-03-11parisc/unaligned: Rewrite 32-bit inline assembly of emulate_sth()Helge Deller1-8/+7
Convert to use real temp variables instead of clobbering processor registers. Signed-off-by: Helge Deller <deller@gmx.de>
2022-03-11parisc/unaligned: Rewrite 32-bit inline assembly of emulate_ldd()Helge Deller1-15/+13
Convert to use real temp variables instead of clobbering processor registers. Signed-off-by: Helge Deller <deller@gmx.de>
2022-03-11parisc/unaligned: Rewrite inline assembly of emulate_ldw()Helge Deller1-12/+11
Convert to use real temp variables instead of clobbering processor registers. Signed-off-by: Helge Deller <deller@gmx.de>