summaryrefslogtreecommitdiffstats
path: root/arch/parisc/mm
AgeCommit message (Collapse)AuthorFilesLines
2019-07-31parisc: Mark expected switch fall-throughs in fault.cHelge Deller1-0/+1
Fix a fall-through warning in fault.c. Fixes: a035d552a93b ("Makefile: Globally enable fall-through warning") Signed-off-by: Helge Deller <deller@gmx.de>
2019-07-09Merge branch 'parisc-5.3-1' of ↵Linus Torvalds1-2/+5
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pull parisc updates from Helge Deller: "Dynamic ftrace support by Sven Schnelle and a header guard fix by Denis Efremov" * 'parisc-5.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: asm: psw.h: missing header guard parisc: add dynamic ftrace compiler.h: add CC_USING_PATCHABLE_FUNCTION_ENTRY parisc: use pr_debug() in kernel/module.c parisc: add WARN_ON() to clear_fixmap parisc: add spinlock to patch function parisc: add support for patching multiple words
2019-07-08Merge branch 'siginfo-linus' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace Pull force_sig() argument change from Eric Biederman: "A source of error over the years has been that force_sig has taken a task parameter when it is only safe to use force_sig with the current task. The force_sig function is built for delivering synchronous signals such as SIGSEGV where the userspace application caused a synchronous fault (such as a page fault) and the kernel responded with a signal. Because the name force_sig does not make this clear, and because the force_sig takes a task parameter the function force_sig has been abused for sending other kinds of signals over the years. Slowly those have been fixed when the oopses have been tracked down. This set of changes fixes the remaining abusers of force_sig and carefully rips out the task parameter from force_sig and friends making this kind of error almost impossible in the future" * 'siginfo-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (27 commits) signal/x86: Move tsk inside of CONFIG_MEMORY_FAILURE in do_sigbus signal: Remove the signal number and task parameters from force_sig_info signal: Factor force_sig_info_to_task out of force_sig_info signal: Generate the siginfo in force_sig signal: Move the computation of force into send_signal and correct it. signal: Properly set TRACE_SIGNAL_LOSE_INFO in __send_signal signal: Remove the task parameter from force_sig_fault signal: Use force_sig_fault_to_task for the two calls that don't deliver to current signal: Explicitly call force_sig_fault on current signal/unicore32: Remove tsk parameter from __do_user_fault signal/arm: Remove tsk parameter from __do_user_fault signal/arm: Remove tsk parameter from ptrace_break signal/nds32: Remove tsk parameter from send_sigtrap signal/riscv: Remove tsk parameter from do_trap signal/sh: Remove tsk parameter from force_sig_info_fault signal/um: Remove task parameter from send_sigtrap signal/x86: Remove task parameter from send_sigtrap signal: Remove task parameter from force_sig_mceerr signal: Remove task parameter from force_sig signal: Remove task parameter from force_sigsegv ...
2019-06-08parisc: add dynamic ftraceSven Schnelle1-2/+2
This patch implements dynamic ftrace for PA-RISC. The required mcount call sequences can get pretty long, so instead of patching the whole call sequence out of the functions, we are using -fpatchable-function-entry from gcc. This puts a configurable amount of NOPS before/at the start of the function. Taking do_sys_open() as example, which would look like this when the call is patched out: 1036b248: 08 00 02 40 nop 1036b24c: 08 00 02 40 nop 1036b250: 08 00 02 40 nop 1036b254: 08 00 02 40 nop 1036b258 <do_sys_open>: 1036b258: 08 00 02 40 nop 1036b25c: 08 03 02 41 copy r3,r1 1036b260: 6b c2 3f d9 stw rp,-14(sp) 1036b264: 08 1e 02 43 copy sp,r3 1036b268: 6f c1 01 00 stw,ma r1,80(sp) When ftrace gets enabled for this function the kernel will patch these NOPs to: 1036b248: 10 19 57 20 <address of ftrace> 1036b24c: 6f c1 00 80 stw,ma r1,40(sp) 1036b250: 48 21 3f d1 ldw -18(r1),r1 1036b254: e8 20 c0 02 bv,n r0(r1) 1036b258 <do_sys_open>: 1036b258: e8 3f 1f df b,l,n .-c,r1 1036b25c: 08 03 02 41 copy r3,r1 1036b260: 6b c2 3f d9 stw rp,-14(sp) 1036b264: 08 1e 02 43 copy sp,r3 1036b268: 6f c1 01 00 stw,ma r1,80(sp) So the first NOP in do_sys_open() will be patched to jump backwards into some minimal trampoline code which pushes a stackframe, saves r1 which holds the return address, loads the address of the real ftrace function, and branches to that location. For 64 Bit things are getting a bit more complicated (and longer) because we must make sure that the address of ftrace location is 8 byte aligned, and the offset passed to ldd for fetching the address is 8 byte aligned as well. Note that gcc has a bug which misplaces the function label, and needs a patch to make dynamic ftrace work. See https://gcc.gnu.org/bugzilla/show_bug.cgi?id=90751 for details. Signed-off-by: Sven Schnelle <svens@stackframe.org> Signed-off-by: Helge Deller <deller@gmx.de>
2019-06-08parisc: add WARN_ON() to clear_fixmapSven Schnelle1-0/+3
Calling clear_fixmap() on an already cleared fixed mapping is a bad thing to do. Add a WARN_ON() to catch such issues. Signed-off-by: Sven Schnelle <svens@stackframe.org> Signed-off-by: Helge Deller <deller@gmx.de>
2019-05-29signal: Remove the task parameter from force_sig_faultEric W. Biederman1-1/+1
As synchronous exceptions really only make sense against the current task (otherwise how are you synchronous) remove the task parameter from from force_sig_fault to make it explicit that is what is going on. The two known exceptions that deliver a synchronous exception to a stopped ptraced task have already been changed to force_sig_fault_to_task. The callers have been changed with the following emacs regular expression (with obvious variations on the architectures that take more arguments) to avoid typos: force_sig_fault[(]\([^,]+\)[,]\([^,]+\)[,]\([^,]+\)[,]\W+current[)] -> force_sig_fault(\1,\2,\3) Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2019-05-27signal: Remove task parameter from force_sig_mceerrEric W. Biederman1-1/+1
All of the callers pass current into force_sig_mceer so remove the task parameter to make this obvious. This also makes it clear that force_sig_mceerr passes current into force_sig_info. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner1-0/+1
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-14Merge branch 'parisc-5.2-2' of ↵Linus Torvalds1-36/+39
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pull more parisc updates from Helge Deller: "Two small enhancements, which I didn't included in the last pull request because I wanted to keep them a few more days in for-next before sending upstream: - Replace the ldcw barrier instruction by a nop instruction in the CAS code on uniprocessor machines. - Map variables read-only after init (enable ro_after_init feature)" * 'parisc-5.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: Use __ro_after_init in init.c parisc: Use __ro_after_init in unwind.c parisc: Use __ro_after_init in time.c parisc: Use __ro_after_init in processor.c parisc: Use __ro_after_init in process.c parisc: Use __ro_after_init in perf_images.h parisc: Use __ro_after_init in pci.c parisc: Use __ro_after_init in inventory.c parisc: Use __ro_after_init in head.S parisc: Use __ro_after_init in firmware.c parisc: Use __ro_after_init in drivers.c parisc: Use __ro_after_init in cache.c parisc: Enable the ro_after_init feature parisc: Drop LDCW barrier in CAS code when running UP
2019-05-14initramfs: provide a generic free_initrd_mem implementationChristoph Hellwig1-7/+0
For most architectures free_initrd_mem just expands to the same free_reserved_area call. Provide that as a generic implementation marked __weak. Link: http://lkml.kernel.org/r/20190213174621.29297-8-hch@lst.de Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> [m68k] Acked-by: Mike Rapoport <rppt@linux.ibm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> [arm64] Cc: Steven Price <steven.price@arm.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Russell King <linux@armlinux.org.uk> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-05-10parisc: Use __ro_after_init in init.cHelge Deller1-4/+4
Signed-off-by: Helge Deller <deller@gmx.de>
2019-05-10parisc: Enable the ro_after_init featureHelge Deller1-32/+35
This patch modifies the initial page mapping functions in the following way: During bootup the init, text and data pages will be mapped RWX and if supported, with huge pages. At final stage of the bootup, the kernel calls free_initmem() and then all pages will be remapped either R-X (for text and read-only data) or RW- (for data). The __init pages will be dropped. This reflects the behaviour of the x86 platform. Signed-off-by: Helge Deller <deller@gmx.de>
2019-05-03parisc: Update huge TLB page support to use per-pagetable spinlockJohn David Anglin1-9/+10
This patch updates the parisc huge TLB page support to use per-pagetable spinlocks. This patch requires Mikulas' per-pagetable spinlock patch and the revised TLB serialization patch from Helge and myself. With Mikulas' patch, we need to use the per-pagetable spinlock for page table updates. The TLB lock is only used to serialize TLB flushes on machines with the Merced bus. Signed-off-by: John David Anglin <dave.anglin@bell.net> Signed-off-by: Helge Deller <deller@gmx.de>
2019-05-03parisc: Allow live-patching of __meminit functionsHelge Deller1-1/+1
When making the text sections writeable with set_kernel_text_rw(1), include all text sections including those in the __init section. Otherwise functions marked with __meminit will stay read-only. Signed-off-by: Helge Deller <deller@gmx.de> Cc: <stable@vger.kernel.org> # 4.20+
2019-05-03parisc: Switch from DISCONTIGMEM to SPARSEMEMHelge Deller1-55/+47
The commit 1c30844d2dfe ("mm: reclaim small amounts of memory when an external fragmentation event occurs") breaks memory management on a parisc c8000 workstation with this memory layout: 0) Start 0x0000000000000000 End 0x000000003fffffff Size 1024 MB 1) Start 0x0000000100000000 End 0x00000001bfdfffff Size 3070 MB 2) Start 0x0000004040000000 End 0x00000040ffffffff Size 3072 MB With the patch 1c30844d2dfe, the kernel will incorrectly reclaim the first zone when it fills up, ignoring the fact that there are two completely free zones. Basiscally, it limits cache size to 1GiB. The parisc kernel is currently using the DISCONTIGMEM implementation, but isn't NUMA. Avoid this issue or strange work-arounds by switching to the more commonly used SPARSEMEM implementation. Reported-by: Mikulas Patocka <mpatocka@redhat.com> Fixes: 1c30844d2dfe ("mm: reclaim small amounts of memory when an external fragmentation event occurs") Signed-off-by: Helge Deller <deller@gmx.de>
2019-05-03parisc: add set_fixmap()/clear_fixmap()Sven Schnelle3-6/+51
These functions will be used for adding code patching functions later. Signed-off-by: Sven Schnelle <svens@stackframe.org> Signed-off-by: Helge Deller <deller@gmx.de>
2019-02-22parisc: use memblock_alloc() instead of custom get_memblock()Mike Rapoport1-33/+19
The get_memblock() function implements custom bottom-up memblock allocator. Setting 'memblock_bottom_up = true' before any memblock allocation is done allows replacing get_memblock() calls with memblock_alloc(). Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Tested-by: Helge Deller <deller@gmx.de> Signed-off-by: Helge Deller <deller@gmx.de>
2019-01-05parisc: Remap hugepage-aligned pages in set_kernel_text_rw()Helge Deller1-2/+2
The alternative coding patch for parisc in kernel 4.20 broke booting machines with PA8500-PA8700 CPUs. The problem is, that for such machines the parisc kernel automatically utilizes huge pages to access kernel text code, but the set_kernel_text_rw() function, which is used shortly before applying any alternative patches, didn't used the correctly hugepage-aligned addresses to remap the kernel text read-writeable. Fixes: 3847dab77421 ("parisc: Add alternative coding infrastructure") Cc: <stable@vger.kernel.org> [4.20] Signed-off-by: Helge Deller <deller@gmx.de>
2018-10-31mm: remove include/linux/bootmem.hMike Rapoport1-1/+0
Move remaining definitions and declarations from include/linux/bootmem.h into include/linux/memblock.h and remove the redundant header. The includes were replaced with the semantic patch below and then semi-automated removal of duplicated '#include <linux/memblock.h> @@ @@ - #include <linux/bootmem.h> + #include <linux/memblock.h> [sfr@canb.auug.org.au: dma-direct: fix up for the removal of linux/bootmem.h] Link: http://lkml.kernel.org/r/20181002185342.133d1680@canb.auug.org.au [sfr@canb.auug.org.au: powerpc: fix up for removal of linux/bootmem.h] Link: http://lkml.kernel.org/r/20181005161406.73ef8727@canb.auug.org.au [sfr@canb.auug.org.au: x86/kaslr, ACPI/NUMA: fix for linux/bootmem.h removal] Link: http://lkml.kernel.org/r/20181008190341.5e396491@canb.auug.org.au Link: http://lkml.kernel.org/r/1536927045-23536-30-git-send-email-rppt@linux.vnet.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Ingo Molnar <mingo@redhat.com> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Jonas Bonn <jonas@southpole.se> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Ley Foon Tan <lftan@altera.com> Cc: Mark Salter <msalter@redhat.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Serge Semin <fancer.lancer@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-31memblock: rename free_all_bootmem to memblock_free_allMike Rapoport1-1/+1
The conversion is done using sed -i 's@free_all_bootmem@memblock_free_all@' \ $(git grep -l free_all_bootmem) Link: http://lkml.kernel.org/r/1536927045-23536-26-git-send-email-rppt@linux.vnet.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Ingo Molnar <mingo@redhat.com> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Jonas Bonn <jonas@southpole.se> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Ley Foon Tan <lftan@altera.com> Cc: Mark Salter <msalter@redhat.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Serge Semin <fancer.lancer@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-28parisc: Fix A500 boot crashJohn David Anglin1-6/+4
I believe the following change will fix the cache/TLB inconsistency observed by Meelis. After changing the page table entries, we need to flush the cache and TLB to ensure that we don't have any stale PTE values in the cache or TLB. The alternative patching is done after all CPUs are running. Thus, we need to flush the whole cache and TLB. I included the init section in the range modified by map_pages as suggested by Helge. Some routines in the init section may require patching. Signed-off-by: John David Anglin <dave.anglin@bell.net> Signed-off-by: Helge Deller <deller@gmx.de>
2018-10-17parisc: Add alternative coding infrastructureHelge Deller1-0/+15
This patch adds the necessary code to patch a running kernel at runtime to improve performance. The current implementation offers a few optimizations variants: - When running a SMP kernel on a single UP processor, unwanted assembler statements like locking functions are overwritten with NOPs. When multiple instructions shall be skipped, one branch instruction is used instead of multiple nop instructions. - In the UP case, some pdtlb and pitlb instructions are patched to become pdtlb,l and pitlb,l which only flushes the CPU-local tlb entries instead of broadcasting the flush to other CPUs in the system and thus may improve performance. - fic and fdc instructions are skipped if no I- or D-caches are installed. This should speed up qemu emulation and cacheless systems. - If no cache coherence is needed for IO operations, the relevant fdc and sync instructions in the sba and ccio drivers are replaced by nops. - On systems which share I- and D-TLBs and thus don't have a seperate instruction TLB, the pitlb instruction is replaced by a nop. Live-patching is done early in the boot process, just after having run the system inventory. No drivers are running and thus no external interrupts should arrive. So the hope is that no TLB exceptions will occur during the patching. If this turns out to be wrong we will probably need to do the patching in real-mode. Signed-off-by: Helge Deller <deller@gmx.de>
2018-10-17parisc: Fix map_pages() to not overwrite existing pte entriesHelge Deller1-6/+2
Fix a long-existing small nasty bug in the map_pages() implementation which leads to overwriting already written pte entries with zero, *if* map_pages() is called a second time with an end address which isn't aligned on a pmd boundry. This happens for example if we want to remap only the text segment read/write in order to run alternative patching on the code. Exiting the loop when we reach the end address fixes this. Cc: stable@vger.kernel.org Signed-off-by: Helge Deller <deller@gmx.de>
2018-08-17mm: convert return type of handle_mm_fault() caller to vm_fault_tSouptick Joarder1-1/+1
Use new return type vm_fault_t for fault handler. For now, this is just documenting that the function returns a VM_FAULT value rather than an errno. Once all instances are converted, vm_fault_t will become a distinct type. Ref-> commit 1c8f422059ae ("mm: change return type to vm_fault_t") In this patch all the caller of handle_mm_fault() are changed to return vm_fault_t type. Link: http://lkml.kernel.org/r/20180617084810.GA6730@jordon-HP-15-Notebook-PC Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Richard Henderson <rth@twiddle.net> Cc: Tony Luck <tony.luck@intel.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Michal Simek <monstr@monstr.eu> Cc: James Hogan <jhogan@kernel.org> Cc: Ley Foon Tan <lftan@altera.com> Cc: Jonas Bonn <jonas@southpole.se> Cc: James E.J. Bottomley <jejb@parisc-linux.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: David S. Miller <davem@davemloft.net> Cc: Richard Weinberger <richard@nod.at> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: "Levin, Alexander (Sasha Levin)" <alexander.levin@verizon.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-13parisc: merge pcx_dma_ops and pcxl_dma_opsChristoph Hellwig1-8/+3
The only difference is that pcxl supports dma coherent allocations, while pcx only supports non-consistent allocations and otherwise fails. But dma_alloc* is not in the fast path, and merging these two allows an easy migration path to the generic dma-noncoherent implementation, so do it. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Helge Deller <deller@gmx.de>
2018-06-04Merge branch 'siginfo-linus' of ↵Linus Torvalds1-29/+25
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace Pull siginfo updates from Eric Biederman: "This set of changes close the known issues with setting si_code to an invalid value, and with not fully initializing struct siginfo. There remains work to do on nds32, arc, unicore32, powerpc, arm, arm64, ia64 and x86 to get the code that generates siginfo into a simpler and more maintainable state. Most of that work involves refactoring the signal handling code and thus careful code review. Also not included is the work to shrink the in kernel version of struct siginfo. That depends on getting the number of places that directly manipulate struct siginfo under control, as it requires the introduction of struct kernel_siginfo for the in kernel things. Overall this set of changes looks like it is making good progress, and with a little luck I will be wrapping up the siginfo work next development cycle" * 'siginfo-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (46 commits) signal/sh: Stop gcc warning about an impossible case in do_divide_error signal/mips: Report FPE_FLTUNK for undiagnosed floating point exceptions signal/um: More carefully relay signals in relay_signal. signal: Extend siginfo_layout with SIL_FAULT_{MCEERR|BNDERR|PKUERR} signal: Remove unncessary #ifdef SEGV_PKUERR in 32bit compat code signal/signalfd: Add support for SIGSYS signal/signalfd: Remove __put_user from signalfd_copyinfo signal/xtensa: Use force_sig_fault where appropriate signal/xtensa: Consistenly use SIGBUS in do_unaligned_user signal/um: Use force_sig_fault where appropriate signal/sparc: Use force_sig_fault where appropriate signal/sparc: Use send_sig_fault where appropriate signal/sh: Use force_sig_fault where appropriate signal/s390: Use force_sig_fault where appropriate signal/riscv: Replace do_trap_siginfo with force_sig_fault signal/riscv: Use force_sig_fault where appropriate signal/parisc: Use force_sig_fault where appropriate signal/parisc: Use force_sig_mceerr where appropriate signal/openrisc: Use force_sig_fault where appropriate signal/nios2: Use force_sig_fault where appropriate ...
2018-05-02parisc: Fix section mismatchesHelge Deller1-1/+1
Fix three section mismatches: 1) Section mismatch in reference from the function ioread8() to the function .init.text:pcibios_init_bridge() 2) Section mismatch in reference from the function free_initmem() to the function .init.text:map_pages() 3) Section mismatch in reference from the function ccio_ioc_init() to the function .init.text:count_parisc_driver() Signed-off-by: Helge Deller <deller@gmx.de>
2018-04-25signal/parisc: Use force_sig_fault where appropriateEric W. Biederman1-15/+10
Filling in struct siginfo before calling force_sig_info a tedious and error prone process, where once in a great while the wrong fields are filled out, and siginfo has been inconsistently cleared. Simplify this process by using the helper force_sig_fault. Which takes as a parameters all of the information it needs, ensures all of the fiddly bits of filling in struct siginfo are done properly and then calls force_sig_info. In short about a 5 line reduction in code for every time force_sig_info is called, which makes the calling function clearer. Cc: James Bottomley <jejb@parisc-linux.org> Cc: Helge Deller <deller@gmx.de> Cc: linux-parisc@vger.kernel.org Acked-by: Helge Deller <deller@gmx.de> # parisc Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-04-25signal/parisc: Use force_sig_mceerr where appropriateEric W. Biederman1-15/+15
In do_page_fault where an mceerr is generated stop and call force_sig_mceerr. Keeping the mcerr handling logic out of the force_sig_info call below. This ensures that only and always in the mcerr case is lsb interesting. This ensures setting set si_lsb in the future won't accidentally stomp another siginfo field in the non mcerr case. Cc: James Bottomley <jejb@parisc-linux.org> Cc: Helge Deller <deller@gmx.de> Cc: linux-parisc@vger.kernel.org Acked-by: Helge Deller <deller@gmx.de> # parisc Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-04-25signal: Ensure every siginfo we send has all bits initializedEric W. Biederman1-0/+1
Call clear_siginfo to ensure every stack allocated siginfo is properly initialized before being passed to the signal sending functions. Note: It is not safe to depend on C initializers to initialize struct siginfo on the stack because C is allowed to skip holes when initializing a structure. The initialization of struct siginfo in tracehook_report_syscall_exit was moved from the helper user_single_step_siginfo into tracehook_report_syscall_exit itself, to make it clear that the local variable siginfo gets fully initialized. In a few cases the scope of struct siginfo has been reduced to make it clear that siginfo siginfo is not used on other paths in the function in which it is declared. Instances of using memset to initialize siginfo have been replaced with calls clear_siginfo for clarity. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-03-02parisc: Hide virtual kernel memory layoutHelge Deller1-1/+6
For security reasons do not expose the virtual kernel memory layout to userspace. Signed-off-by: Helge Deller <deller@gmx.de> Suggested-by: Kees Cook <keescook@chromium.org> Cc: stable@vger.kernel.org # 4.15 Reviewed-by: Kees Cook <keescook@chromium.org>
2018-01-02parisc: Show initial kernel memory layout unhashedHelge Deller1-5/+5
Fixes: ad67b74d2469d9b8 ("printk: hash addresses printed with %p") Signed-off-by: Helge Deller <deller@gmx.de>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman3-0/+3
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-22parisc: Add HWPOISON page fault handler codeHelge Deller1-4/+29
Commit 24587380f61d ("parisc: Add MADV_HWPOISON and MADV_SOFT_OFFLINE") added the necessary constants to handle hardware-poisoning. Those were needed to support the page deallocation feature from firmware. But I completely missed to add the relevant fault handler code. This now showed up when I ran the madvise07 testcase from the Linux Test Project, which failed with a kernel BUG at arch/parisc/mm/fault.c:320. With this patch the parisc kernel now behaves like other platforms and gives the same kernel syslog warnings when poisoning pages. Signed-off-by: Helge Deller <deller@gmx.de>
2017-07-06mm/hugetlb: add size parameter to huge_pte_offset()Punit Agrawal1-1/+2
A poisoned or migrated hugepage is stored as a swap entry in the page tables. On architectures that support hugepages consisting of contiguous page table entries (such as on arm64) this leads to ambiguity in determining the page table entry to return in huge_pte_offset() when a poisoned entry is encountered. Let's remove the ambiguity by adding a size parameter to convey additional information about the requested address. Also fixup the definition/usage of huge_pte_offset() throughout the tree. Link: http://lkml.kernel.org/r/20170522133604.11392-4-punit.agrawal@arm.com Signed-off-by: Punit Agrawal <punit.agrawal@arm.com> Acked-by: Steve Capper <steve.capper@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: James Hogan <james.hogan@imgtec.com> (odd fixer:METAG ARCHITECTURE) Cc: Ralf Baechle <ralf@linux-mips.org> (supporter:MIPS) Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Helge Deller <deller@gmx.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Rich Felker <dalias@libc.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Chris Metcalf <cmetcalf@mellanox.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Michal Hocko <mhocko@suse.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-02parisc: Report SIGSEGV instead of SIGBUS when running out of stackHelge Deller1-1/+1
When a process runs out of stack the parisc kernel wrongly faults with SIGBUS instead of the expected SIGSEGV signal. This example shows how the kernel faults: do_page_fault() command='a.out' type=15 address=0xfaac2000 in libc-2.24.so[f8308000+16c000] trap #15: Data TLB miss fault, vm_start = 0xfa2c2000, vm_end = 0xfaac2000 The vma->vm_end value is the first address which does not belong to the vma, so adjust the check to include vma->vm_end to the range for which to send the SIGSEGV signal. This patch unbreaks building the debian libsigsegv package. Cc: stable@vger.kernel.org Signed-off-by: Helge Deller <deller@gmx.de>
2017-06-09parisc: Avoid zeroing gr[0] in fixup_exception()Helge Deller1-0/+1
Register gr[0] holds the PSW in interrupt context. It's absolutely unlikely that the compiler will use register zero in a get_user() call, but better BUG on such a case in fixup_exception() anyway. Signed-off-by: Helge Deller <deller@gmx.de>
2017-05-12parisc: Add Page Deallocation Table (PDT) supportHelge Deller1-0/+3
The firmare in most parisc machines maintains a Page Deallocation Table (PDT) which holds a list of physical memory addresses where hardware detected memory errors (single bit and double bit errors). This patch adds the missing PDC firmware calls and the logic to read the PDT from firmware, report all current PDT entries and exclude the reported bad memory from being used by Linux. Signed-off-by: Helge Deller <deller@gmx.de>
2017-05-10parisc: Drop per_cpu uaccess related exception_data structHelge Deller1-9/+0
The last users have been migrated off by commits d19f5e41b344 ("parisc: Clean up fixup routines for get_user()/put_user()") and 554bfeceb8a2 ("parisc: Fix access fault handling in pa_memcpy()"). Signed-off-by: Helge Deller <deller@gmx.de>
2017-03-29parisc: Clean up fixup routines for get_user()/put_user()Helge Deller1-0/+17
Al Viro noticed that userspace accesses via get_user()/put_user() can be simplified a lot with regard to usage of the exception handling. This patch implements a fixup routine for get_user() and put_user() in such that the exception handler will automatically load -EFAULT into the register %r8 (the error value) in case on a fault on userspace. Additionally the fixup routine will zero the target register on fault in case of a get_user() call. The target register is extracted out of the faulting assembly instruction. This patch brings a few benefits over the old implementation: 1. Exception handling gets much cleaner, easier and smaller in size. 2. Helper functions like fixup_get_user_skip_1 (all of fixup.S) can be dropped. 3. No need to hardcode %r9 as target register for get_user() any longer. This helps the compiler register allocator and thus creates less assembler statements. 4. No dependency on the exception_data contents any longer. 5. Nested faults will be handled cleanly. Reported-by: Al Viro <viro@ZenIV.linux.org.uk> Cc: <stable@vger.kernel.org> # v4.9+ Signed-off-by: Helge Deller <deller@gmx.de>
2017-03-03Merge branch 'parisc-4.11-1' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pull parisc fixes and cleanups from Helge Deller: "Nothing really important in this patchset: fix resource leaks in error paths, coding style cleanups and code removal" * 'parisc-4.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: Remove flush_user_dcache_range and flush_user_icache_range parisc: fix a printk parisc: ccio-dma: Handle return NULL error from ioremap_nocache parisc: Define access_ok() as macro parisc: eisa: Fix resource leaks in error paths parisc: eisa: Remove coding style errors
2017-03-02sched/headers: Prepare for new header dependencies before moving code to ↵Ingo Molnar1-0/+1
<linux/sched/debug.h> We are going to split <linux/sched/debug.h> out of <linux/sched.h>, which will have to be picked up from other headers and a couple of .c files. Create a trivial placeholder <linux/sched/debug.h> file that just maps to <linux/sched.h> to make this patch obviously correct and bisectable. Include the new header in the files that are going to need it. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-03-02sched/headers: Prepare for new header dependencies before moving more code ↵Ingo Molnar1-0/+1
to <linux/sched/mm.h> We are going to split more MM APIs out of <linux/sched.h>, which will have to be picked up from a couple of .c files. The APIs that we are going to move are: arch_pick_mmap_layout() arch_get_unmapped_area() arch_get_unmapped_area_topdown() mm_update_next_owner() Include the header in the files that are going to need it. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-02-25parisc: fix a printkDan Carpenter1-2/+2
We want to do a pr_cont() here and not a pr_warn(). Fixes: b391667eb45a ("parisc: Report trap type as human readable string") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Helge Deller <deller@gmx.de>
2017-02-22arch, mm: remove arch specific show_memMichal Hocko1-49/+0
We have a generic implementation for quite some time already. If there is any arch specific information to be printed then we should add a callback called from the generic code rather than duplicate the whole show_mem. The current code has resulted in the code duplication and the output divergence which is both confusing and adds maintainance costs. Let's just get rid of this mess. Link: http://lkml.kernel.org/r/20170117091543.25850-4-mhocko@kernel.org Signed-off-by: Michal Hocko <mhocko@suse.com> Acked-by: Guan Xuetao <gxt@mprc.pku.edu.cn> [UniCore32] Acked-by: Helge Deller <deller@gmx.de> [for parisc] Acked-by: Chris Metcalf <cmetcalf@mellanox.com> [for tile] Acked-by: Mel Gorman <mgorman@suse.de> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Tony Luck <tony.luck@intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-21Merge tag 'rodata-v4.11-rc1' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull rodata updates from Kees Cook: "This renames the (now inaccurate) DEBUG_RODATA and related SET_MODULE_RONX configs to the more sensible STRICT_KERNEL_RWX and STRICT_MODULE_RWX" * tag 'rodata-v4.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: arch: Rename CONFIG_DEBUG_RODATA and CONFIG_DEBUG_MODULE_RONX arch: Move CONFIG_DEBUG_RODATA and CONFIG_SET_MODULE_RONX to be common
2017-02-07arch: Rename CONFIG_DEBUG_RODATA and CONFIG_DEBUG_MODULE_RONXLaura Abbott1-1/+1
Both of these options are poorly named. The features they provide are necessary for system security and should not be considered debug only. Change the names to CONFIG_STRICT_KERNEL_RWX and CONFIG_STRICT_MODULE_RWX to better describe what these options do. Signed-off-by: Laura Abbott <labbott@redhat.com> Acked-by: Jessica Yu <jeyu@redhat.com> Signed-off-by: Kees Cook <keescook@chromium.org>
2017-01-02parisc: Add line-break when printing segfault infoHelge Deller1-1/+1
Add a leading line break else printed line gets too long. Signed-off-by: Helge Deller <deller@gmx.de> Cc: <stable@vger.kernel.org> # v4.9
2016-10-11parisc: Show trap name in kernel crashHelge Deller1-6/+11
Show the real trap name when the kernel crashes. Signed-off-by: Helge Deller <deller@gmx.de>
2016-10-11parisc: Zero-initialize newly alloced memblockHelge Deller1-0/+2
Commit 4fe9e1d957e4 ("parisc: Drop bootmem and switch to memblock") switched to the memblock allocator, but missed to zero-initialize the newly allocated memblocks. This lead to crashes on some machines like the rp3410. Fixes: 4fe9e1d957e4 ("parisc: Drop bootmem and switch to memblock") Signed-off-by: Helge Deller <deller@gmx.de>