summaryrefslogtreecommitdiffstats
path: root/arch/parisc/boot
AgeCommit message (Collapse)AuthorFilesLines
2019-09-12parisc: Have git ignore generated real2.S and firmware.cJeroen Roovers1-0/+2
These files are not covered in globs from any other .gitignore files. Signed-off-by: Jeroen Roovers <jer@gentoo.org> Signed-off-by: Helge Deller <deller@gmx.de>
2019-08-01parisc: Add archclean Makefile targetJames Bottomley1-0/+1
Apparently we don't have an archclean target in our arch/parisc/Makefile, so files in there never get cleaned out by make mrproper. This, in turn means that the sizes.h file in arch/parisc/boot/compressed never gets removed and worse, when you transition to an O=build/parisc[64] build model it overrides the generated file. The upshot being my bzImage was building with a SZ_end that was too small. I fixed it by making mrproper clean everything. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: stable@vger.kernel.org # v4.20+ Signed-off-by: Helge Deller <deller@gmx.de>
2019-08-01parisc: Strip debug info from kernel before creating compressed vmlinuzHelge Deller1-1/+2
Same as on x86-64, strip the .comment, .note and debug sections from the Linux kernel before creating the compressed image for the boot loader. Reported-by: James Bottomley <James.Bottomley@HansenPartnership.com> Reported-by: Sven Schnelle <svens@stackframe.org> Cc: stable@vger.kernel.org # v4.20+ Signed-off-by: Helge Deller <deller@gmx.de>
2019-08-01parisc: Fix build of compressed kernel even with debug enabledHelge Deller1-2/+2
With debug info enabled (CONFIG_DEBUG_INFO=y) the resulting vmlinux may get that huge that we need to increase the start addresss for the decompression text section otherwise one will face a linker error. Reported-by: Sven Schnelle <svens@stackframe.org> Tested-by: Sven Schnelle <svens@stackframe.org> Cc: stable@vger.kernel.org # v4.14+ Signed-off-by: Helge Deller <deller@gmx.de>
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner2-0/+2
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-06parisc: Use PA_ASM_LEVEL in boot codeHelge Deller1-3/+3
The LEVEL define clashed with the DRBD code. Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Helge Deller <deller@gmx.de> Cc: <stable@vger.kernel.org> # v4.14+
2019-05-03parisc: PA-Linux requires at least 32 MB RAMHelge Deller1-11/+20
Even a 32-bit kernel requires at least 27 MB to decompress itself, so halt the system with a message if the system has less memory than 32 MB. Signed-off-by: Helge Deller <deller@gmx.de>
2019-02-21parisc: remove meaningless ccflags-y in arch/parisc/boot/MakefileMasahiro Yamada1-6/+0
This ccflags-y is never used because arch/parisc/boot/Makefile only contains objcopy and install targets. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Helge Deller <deller@gmx.de>
2018-10-17parisc: Include compressed vmlinux file in vmlinuz boot kernelHelge Deller3-25/+84
Change the parisc vmlinuz boot code to include and process the real compressed vmlinux.gz ELF file instead of a compressed memory dump. This brings parisc in sync on how it's done on x86_64. The benefit of this change is that, e.g. for debugging purposes, one can then extract the vmlinux file out of the vmlinuz which was booted which wasn't possible before. This can be archieved with the existing scripts/extract-vmlinux script, which just needs a small tweak to prefer to extract a compressed file before trying the existing given binary. The downside of this approach is that due to the extra round of decompression/ELF processing we need more physical memory installed to be able to boot a kernel. Signed-off-by: Helge Deller <deller@gmx.de>
2018-02-01Merge branch 'for-linus' of ↵Linus Torvalds1-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk Pull printk updates from Petr Mladek: - Add a console_msg_format command line option: The value "default" keeps the old "[time stamp] text\n" format. The value "syslog" allows to see the syslog-like "<log level>[timestamp] text" format. This feature was requested by people doing regression tests, for example, 0day robot. They want to have both filtered and full logs at hands. - Reduce the risk of softlockup: Pass the console owner in a busy loop. This is a new approach to the old problem. It was first proposed by Steven Rostedt on Kernel Summit 2017. It marks a context in which the console_lock owner calls console drivers and could not sleep. On the other side, printk() callers could detect this state and use a busy wait instead of a simple console_trylock(). Finally, the console_lock owner checks if there is a busy waiter at the end of the special context and eventually passes the console_lock to the waiter. The hand-off works surprisingly well and helps in many situations. Well, there is still a possibility of the softlockup, for example, when the flood of messages stops and the last owner still has too much to flush. There is increasing number of people having problems with printk-related softlockups. We might eventually need to get better solution. Anyway, this looks like a good start and promising direction. - Do not allow to schedule in console_unlock() called from printk(): This reverts an older controversial commit. The reschedule helped to avoid softlockups. But it also slowed down the console output. This patch is obsoleted by the new console waiter logic described above. In fact, the reschedule made the hand-off less effective. - Deprecate "%pf" and "%pF" format specifier: It was needed on ia64, ppc64 and parisc64 to dereference function descriptors and show the real function address. It is done transparently by "%ps" and "pS" format specifier now. Sergey Senozhatsky found that all the function descriptors were in a special elf section and could be easily detected. - Remove printk_symbol() API: It has been obsoleted by "%pS" format specifier, and this change helped to remove few continuous lines and a less intuitive old API. - Remove redundant memsets: Sergey removed unnecessary memset when processing printk.devkmsg command line option. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk: (27 commits) printk: drop redundant devkmsg_log_str memsets printk: Never set console_may_schedule in console_trylock() printk: Hide console waiter logic into helpers printk: Add console owner and waiter logic to load balance console writes kallsyms: remove print_symbol() function checkpatch: add pF/pf deprecation warning symbol lookup: introduce dereference_symbol_descriptor() parisc64: Add .opd based function descriptor dereference powerpc64: Add .opd based function descriptor dereference ia64: Add .opd based function descriptor dereference sections: split dereference_function_descriptor() openrisc: Fix conflicting types for _exext and _stext lib: do not use print_symbol() irq debug: do not use print_symbol() sysfs: do not use print_symbol() drivers: do not use print_symbol() x86: do not use print_symbol() unicore32: do not use print_symbol() sh: do not use print_symbol() mn10300: do not use print_symbol() ...
2018-01-09parisc64: Add .opd based function descriptor dereferenceSergey Senozhatsky1-0/+2
We are moving towards separate kernel and module function descriptor dereference callbacks. This patch enables it for parisc64. For pointers that belong to the kernel - Added __start_opd and __end_opd pointers, to track the kernel .opd section address range; - Added dereference_kernel_function_descriptor(). Now we will dereference only function pointers that are within [__start_opd, __end_opd); For pointers that belong to a module - Added dereference_module_function_descriptor() to handle module function descriptor dereference. Now we will dereference only pointers that are within [module->opd.start, module->opd.end). Link: http://lkml.kernel.org/r/20171109234830.5067-5-sergey.senozhatsky@gmail.com To: Tony Luck <tony.luck@intel.com> To: Fenghua Yu <fenghua.yu@intel.com> To: Helge Deller <deller@gmx.de> To: Benjamin Herrenschmidt <benh@kernel.crashing.org> To: Paul Mackerras <paulus@samba.org> To: Michael Ellerman <mpe@ellerman.id.au> To: James Bottomley <jejb@parisc-linux.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Jessica Yu <jeyu@kernel.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: linux-ia64@vger.kernel.org Cc: linux-parisc@vger.kernel.org Cc: linuxppc-dev@lists.ozlabs.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Tested-by: Helge Deller <deller@gmx.de> #parisc64 Signed-off-by: Petr Mladek <pmladek@suse.com>
2017-12-17parisc: Fix indenting in puts()Helge Deller1-2/+2
Static analysis tools complain that we intended to have curly braces around this indent block. In this case this assumption is wrong, so fix the indenting. Fixes: 2f3c7b8137ef ("parisc: Add core code for self-extracting kernel") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Helge Deller <deller@gmx.de> Cc: <stable@vger.kernel.org> # v4.14+
2017-09-22parisc: Unbreak bootloader due to gcc-7 optimizationsHelge Deller2-2/+3
gcc-7 optimizes the byte-wise accesses of get_unaligned_le32() into word-wise accesses if the 32-bit integer output_len is declared as external. This panics then the bootloader since we don't have the unaligned access fault trap handler installed during boot time. Avoid this optimization by declaring output_len as byte-aligned and thus unbreak the bootloader code. Additionally, compile the boot code optimized for size. Signed-off-by: Helge Deller <deller@gmx.de>
2017-08-22parisc: Add core code for self-extracting kernelHelge Deller9-0/+679
Signed-off-by: Helge Deller <deller@gmx.de>