| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
In the microMIPS encoding some memory access instructions have their
immediate offset reduced to 12 bits only. That does not match the GCC
`R' constraint we use in some places to satisfy the requirement,
resulting in build failures like this:
{standard input}: Assembler messages:
{standard input}:720: Error: macro used $at after ".set noat"
{standard input}:720: Warning: macro instruction expanded into multiple instructions
Fix the problem by defining a macro, `GCC_OFF12_ASM', that expands to
the right constraint depending on whether microMIPS or standard MIPS
code is produced. Also apply the fix to where `m' is used as in the
worst case this change does nothing, e.g. where the pointer was already
in a register such as a function argument and no further offset was
requested, and in the best case it avoids an extraneous sequence of up
to two instructions to load the high 20 bits of the address in the LL/SC
loop. This reduces the risk of lock contention that is the higher the
more instructions there are in the critical section between LL and SC.
Strictly speaking we could just bulk-replace `R' with `ZC' as the latter
constraint adjusts automatically depending on the ISA selected.
However it was only introduced with GCC 4.9 and we keep supporing older
compilers for the standard MIPS configuration, hence the slightly more
complicated approach I chose.
The choice of a zero-argument function-like rather than an object-like
macro was made so that it does not look like a function call taking the
C expression used for the constraint as an argument. This is so as not
to confuse the reader or formatting checkers like `checkpatch.pl' and
follows previous practice.
Signed-off-by: Maciej W. Rozycki <macro@codesourcery.com>
Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/8482/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Only allow 32-bit microMIPS builds, we're not ready yet for 64-bit
microMIPS support.
QEMU does have support for the 64-bit microMIPS ISA and with minor
tweaks it is possible to have a 64-bit processor emulated there that
runs microMIPS code, so despite the lack of actual 64-bit microMIPS
hardware there is a way to run 64-bit microMIPS Linux, but it can all be
considered early development and we are not there yet. Userland tools
are lacking too, e.g. GCC produces bad code:
{standard input}: Assembler messages:
{standard input}:380: Warning: wrong size instruction in a 16-bit branch delay slot
And our build fails early on, so disable the configuration, for the sake
of automatic random config checkers if nothing else. Whoever needs to
experiment with 64-bit microMIPS support can revert this change easily.
Signed-off-by: Maciej W. Rozycki <macro@codesourcery.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/8481/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Fix:
arch/mips/kernel/signal.c: In function 'handle_signal':
arch/mips/kernel/signal.c:533:21: error: cast from pointer to integer of different size [-Werror=pointer-to-int-cast]
unsigned int tmp = (unsigned int)current->mm->context.vdso;
^
arch/mips/kernel/signal.c:536:9: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast]
vdso = (void *)tmp;
^
cc1: all warnings being treated as errors
when building a 64-bit kernel.
This is not really a supported configuration, but the cast is wrong
either way, Linux makes the assumption that sizeof(void *) equals
sizeof(unsigned long) and therefore the latter type is expected to be
used where integer operations have to be applied to pointers for some
reason.
Signed-off-by: Maciej W. Rozycki <macro@codesourcery.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/8480/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
The microMIPS microassembler is only suitable for configurations where
the kernel itself is built to microMIPS machine code and not where only
user microMIPS software is supported. The former is controlled with the
CPU_MICROMIPS configuration setting, whereas SYS_SUPPORTS_MICROMIPS is
used for the latter.
Not only that, but with a given microMIPS vs standard MIPS kernel
configuration only one microassembler is needed, that matches the ISA
selected -- CP0.Config3.ISAOnExc is mandatory on microMIPS processors,
so there is never a need to mix microMIPS and standard MIPS code.
Consequently build only the microassembler that matches the ISA selected
for the kernel.
Signed-off-by: Maciej W. Rozycki <macro@codesourcery.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/8479/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Add missing microMIPS support to Malta. Currently the kernel only
enables support for the instruction set for the SEAD-3 board despite the
fact processor features have nothing to do with the board a processor is
installed in.
In this case there is no way to run microMIPS software in a fully
supported way under Linux on QEMU. QEMU supports the emulation of a
Malta board, but does not emulate SEAD-3. Linux supports running
microMIPS code on a SEAD-3 board, but hardcodes such support to off on
an emulated Malta board even if the processor selected has the microMIPS
instruction set implemented.
Adding support for the SEAD-3 to QEMU is a major project. Flipping a
bit in the kernel that shouldn't have been cleared in the first place is
a trivial effort. Thus the answer is plain...
Signed-off-by: Maciej W. Rozycki <macro@codesourcery.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/8478/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Make loongson_rtc_resources static to eliminate the following
sparse warning:
warning: symbol 'loongson_rtc_resources' was not declared. Should it be static?
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/8529/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Add a missing include to eliminate the following sparse warnings:
warning: symbol 'prom_init' was not declared. Should it be static?
warning: symbol 'prom_free_prom_memory' was not declared. Should it be static?
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/8531/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Make ml2f_reboot static to elimite the following sparse warning:
warning: symbol 'ml2f_reboot' was not declared. Should it be static?
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/8528/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Make internal static to eliminate the following sparse warnings:
warning: symbol 'ip6_irqaction' was not declared. Should it be static?
warning: symbol 'cascade_irqaction' was not declared. Should it be static?
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/8527/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Add a missing include to get rid of the following sparse warning:
warning: symbol 'plat_mem_setup' was not declared. Should it be static?
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/8530/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Add a missing include to get rid of the following sparse warnings:
warning: symbol 'cs5536_pci_conf_write4' was not declared. Should it be static?
warning: symbol 'cs5536_pci_conf_read4' was not declared. Should it be static?
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/8526/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Fix array initializer syntax to get rid of the following sparse warnings:
"obsolete array initializer, use C99 syntax".
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/8525/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Building a 64bit kernel for the SGI O2 (IP32) and the SGI Indy (IP22) uses
the 'vmlinux.32' target, which converts the output 64-bit 'vmlinux' image
into a 32-bit wrapped image. This is needed for certain revisions of the
IP22 and IP32 ARCS PROMs to boot correctly, but this target is missing
from the 'archhelp' info that is emitted by 'make help'.
Signed-off-by: Joshua Kinard <kumba@gentoo.org>
Cc: Linux MIPS List <linux-mips@linux-mips.org>
Patchwork: https://patchwork.linux-mips.org/patch/7991/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Having #ifdefs just to guard comments is not really helpful
so drop them. Moreover, the code wasn't really reached anyway
since there is a #ifndef CONFIG_CPU_MIPSR2 on the top of the file.
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/8513/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Mark octeon_model_get_string() with __init and make internal functions
static.
Signed-off-by: Aaro Koskinen <aaro.koskinen@nsn.com>
Cc: David Daney <david.daney@cavium.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/7668/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Move code to avoid forward declarations.
Signed-off-by: Aaro Koskinen <aaro.koskinen@nsn.com>
Cc: David Daney <david.daney@cavium.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/7667/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
We should not need to read fuses during normal operation, also the current
code has issues with that (not safe for concurrent access). Since there
are no in-kernel users for these, just delete them. Drivers should
not need such OCTEON_HAS_FEATURE mechanism in any case, instead the
information should be passed via device tree.
Signed-off-by: Aaro Koskinen <aaro.koskinen@nsn.com>
Cc: David Daney <david.daney@cavium.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/7665/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Move cvmx_fuse_read_byte() into a .c file.
Signed-off-by: Aaro Koskinen <aaro.koskinen@nsn.com>
Cc: David Daney <david.daney@cavium.com>
Cc: linux-mips@linux-mips.org
Cc: Aaro Koskinen <aaro.koskinen@nsn.com>
Patchwork: https://patchwork.linux-mips.org/patch/7666/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Continue the backtrace if we cannot find SP adjustment and RA save. In
that case, just assume the current RA. This allows us to get samples of
frequent callers of e.g. GLIBC memset().
Signed-off-by: Aaro Koskinen <aaro.koskinen@nsn.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/8109/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Allow unsupported CPU types to use backtrace with timer-based profiling.
Some CPUs (notably OCTEON) lack architecture-specific oprofile driver. In
such case oprofile can fallback to timer-based mode, and arch code can
still provide the backtrace functionality. So just set up the backtrace
hook always.
Signed-off-by: Aaro Koskinen <aaro.koskinen@nsn.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/8108/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
They can be useful to determine how the MMU is configured on a MC
exception.
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/8401/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
The HTW registers can be useful to debug a MC exception.
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/8400/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
printk should not be used without a KERN_ facility level
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/8399/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Allow loading an initrd passed by the firmware.
Signed-off-by: Alban Bedel <albeu@free.fr>
Cc: linux-kernel@vger.kernel.org
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/8354/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
No need to duplicate code that is available in the firmware library.
It also give us access to the firmware environment which is needed
to read the initrd address and size.
Signed-off-by: Alban Bedel <albeu@free.fr>
Cc: linux-kernel@vger.kernel.org
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/8353/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Atheros AR5312 and AR2315 both have a builtin wireless device, this
patch add helper code and register platform device for all supported
WiSoCs.
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Cc: Linux MIPS <linux-mips@linux-mips.org>
Patchwork: https://patchwork.linux-mips.org/patch/8249/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Add PCI host controller driver and DMA address calculation hook.
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Cc: Linux MIPS <linux-mips@linux-mips.org>
Patchwork: https://patchwork.linux-mips.org/patch/8246/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
AR5312 SoC flash controller maps the flash content to memory and
translates the memory access operations to the flash access operations.
Such controller is fully supported by the physmap-flash driver.
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>R5312 SoC flash
Cc: Linux MIPS <linux-mips@linux-mips.org>
Patchwork: https://patchwork.linux-mips.org/patch/8245/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Detect SoC type based on device ID and board configuration data.
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Cc: Linux MIPS <linux-mips@linux-mips.org>
Patchwork: https://patchwork.linux-mips.org/patch/8244/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
All boards based on AR5312/AR2315 SoC have a special structure located
at the end of flash. This structure contains board-specific data such as
Ethernet and Wireless MAC addresses. The flash is mapped to the memmory
at predefined location.
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Cc: Linux MIPS <linux-mips@linux-mips.org>
Patchwork: https://patchwork.linux-mips.org/patch/8243/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Cc: Linux MIPS <linux-mips@linux-mips.org>
Patchwork: https://patchwork.linux-mips.org/patch/8242/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Cc: Linux MIPS <linux-mips@linux-mips.org>
Patchwork: https://patchwork.linux-mips.org/patch/8241/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Add interrupts initialization and handling routines, also add AHB bus
error interrupt handlers for both SoCs families.
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Cc: Linux MIPS <linux-mips@linux-mips.org>
Patchwork: https://patchwork.linux-mips.org/patch/8240/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Add basic support for Atheros AR2315+ SoCs: registers definition file
and initial setup code.
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Cc: Linux MIPS <linux-mips@linux-mips.org>
Patchwork: https://patchwork.linux-mips.org/patch/8239/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Add basic support for Atheros AR5312/AR2312 SoCs: registers definition
file and initial setup code.
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Cc: Linux MIPS <linux-mips@linux-mips.org>
Patchwork: https://patchwork.linux-mips.org/patch/8238/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Add common code for Atheros AR5312 and Atheros AR2315 SoCs families.
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Cc: Linux MIPS <linux-mips@linux-mips.org>
Patchwork: https://patchwork.linux-mips.org/patch/8237
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Fix some value corruptions with values that can't be represented in a
signed long.
Signed-off-by: Alban Bedel <albeu@free.fr>
Cc: linux-kernel@vger.kernel.org
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/8358/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
When reading u-boot's key=value pairs it should skip the '=' and not
use the next argument.
Signed-off-by: Alban Bedel <albeu@free.fr>
Cc: linux-kernel@vger.kernel.org
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/8357/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Signed-off-by: John Crispin <blogic@openwrt.org>
Patchwork: http://patchwork.linux-mips.org/patch/8034/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Signed-off-by: John Crispin <blogic@openwrt.org>
Patchwork: http://patchwork.linux-mips.org/patch/8029/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Signed-off-by: John Crispin <blogic@openwrt.org>
Patchwork: http://patchwork.linux-mips.org/patch/8031/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
This is the small version of MT7620a.
Signed-off-by: John Crispin <blogic@openwrt.org>
Patchwork: http://patchwork.linux-mips.org/patch/8030/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Add support for the new MT7621/8 SoC and kill ifdefs.
Cleanup some whitespace error while we are at it.
Signed-off-by: John Crispin <blogic@openwrt.org>
Patchwork: http://patchwork.linux-mips.org/patch/8028/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Before we had a pinctrl driver we used a custom OF api. This patch converts the
soc specific pinmux data to a new set of structs. We also add some new pinmux
setings.
Signed-off-by: John Crispin <blogic@openwrt.org>
Patchwork: http://patchwork.linux-mips.org/patch/8009/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
This is a regression caused by:
commit afb46f7996e91aeb36e07bc92cf96e8045bec00e
Author: Rob Herring <robh@kernel.org>
Date: Wed Apr 2 19:07:24 2014 -0500
mips: ralink: convert to use unflatten_and_copy_device_tree
Make the of init code reuse the cmdline defined inside the dts.
Signed-off-by: John Crispin <blogic@openwrt.org>
Patchwork: http://patchwork.linux-mips.org/patch/8008/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
This patch adds a trivial driver that allows userland to extract the bootrom of
a SoC via debugfs.
Signed-off-by: John Crispin <blogic@openwrt.org>
Patchwork: http://patchwork.linux-mips.org/patch/8002/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Register the wireless mac clock on rti3883. This is required by the wifi driver.
Signed-off-by: John Crispin <blogic@openwrt.org>
Patchwork: http://patchwork.linux-mips.org/patch/8007/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Register the wireleass mac clock on rt2880. This is required by the wifi driver.
Signed-off-by: John Crispin <blogic@openwrt.org>
Patchwork: http://patchwork.linux-mips.org/patch/8006/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
This function was missing causing make allmod to fail.
Signed-off-by: John Crispin <blogic@openwrt.org>
Patchwork: http://patchwork.linux-mips.org/patch/8005/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
