| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Add the missing of_node_put() to release the refcount incremented
by of_find_compatible_node().
Signed-off-by: Gong Yuanjun <ruc_gongyuanjun@163.com>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
The node names should be generic and SPI NOR dtschema expects "flash".
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Acked-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
platform_device_add_data() duplicates the memory it is passed. So we can
free some memory to save a few bytes that would remain unused otherwise.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
platform_device_add_data() duplicates the memory it is passed. So we can
free some memory to save a few bytes that would remain unused otherwise.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Use the new compatible string "ralink,mt7621-pinctrl" for the Ralink MT7621
pinctrl subdriver on mt7621.dtsi.
Each subdriver needs to have a different compatible string. We don't want
the same compatible string to match a different subdriver's pinmux data as
it's not for our SoC.
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Acked-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Link: https://lore.kernel.org/r/20220414173916.5552-10-arinc.unal@arinc9.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Refresh USB nodes in the jz4780.dtsi, x1000.dtsi, and x1830.dtsi files.
Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>
Link: https://lore.kernel.org/r/1649964337-114337-4-git-send-email-zhouyanjie@wanyeetech.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Pass a boolean flag to indicate if swiotlb needs to be enabled based on
the addressing needs, and replace the verbose argument with a set of
flags, including one to force enable bounce buffering.
Note that this patch removes the possibility to force xen-swiotlb use
with the swiotlb=force parameter on the command line on x86 (arm and
arm64 never supported that), but this interface will be restored shortly.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Tested-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
|
|
Use the generic swiotlb initialization helper instead of open coding it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Tested-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
|
|
The driver for ATM Ambassador devices spews build warnings on
microblaze. The virt_to_bus() calls discard the volatile keyword.
The right thing to do would be to migrate this driver to a modern
DMA API but it seems unlikely anyone is actually using it.
There had been no fixes or functional changes here since
the git era begun.
In fact it sounds like the FW loading was broken from 2008
'til 2012 - see commit fcdc90b025e6 ("atm: forever loop loading
ambassador firmware").
Let's remove this driver, there isn't much changing in the APIs,
if users come forward we can apologize and revert.
Link: https://lore.kernel.org/all/20220321144013.440d7fc0@kicinski-fedora-pc1c0hjn.dhcp.thefacebook.com/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The driver for LAN Media WAN interfaces spews build warnings on
microblaze. The virt_to_bus() calls discard the volatile keyword.
The right thing to do would be to migrate this driver to a modern
DMA API but it seems unlikely anyone is actually using it.
There had been no fixes or functional changes here since
the git era begun.
Let's remove this driver, there isn't much changing in the APIs,
if users come forward we can apologize and revert.
Link: https://lore.kernel.org/all/20220321144013.440d7fc0@kicinski-fedora-pc1c0hjn.dhcp.thefacebook.com/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS fixes from Thomas Bogendoerfer:
- build fix for gpio
- fix crc32 build problems
- check for failed memory allocations
* tag 'mips_5.18_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
MIPS: crypto: Fix CRC32 code
MIPS: rb532: move GPIOD definition into C-files
MIPS: lantiq: check the return value of kzalloc()
mips: sgi-ip22: add a check for the return of kzalloc()
|
|
Commit 67512a8cf5a7 ("MIPS: Avoid macro redefinitions") changed how the
MIPS register macros were defined, in order to allow the code to compile
under LLVM/Clang.
The MIPS CRC32 code however wasn't updated accordingly, causing a build
bug when using a MIPS32r6 toolchain without CRC support.
Update the CRC32 code to use the macros correctly, to fix the build
failures.
Fixes: 67512a8cf5a7 ("MIPS: Avoid macro redefinitions")
Cc: <stable@vger.kernel.org>
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Add new environment variables, USERCFLAGS and USERLDFLAGS to allow
additional flags to be passed to user-space programs.
- Fix missing fflush() bugs in Kconfig and fixdep
- Fix a minor bug in the comment format of the .config file
- Make kallsyms ignore llvm's local labels, .L*
- Fix UAPI compile-test for cross-compiling with Clang
- Extend the LLVM= syntax to support LLVM=<suffix> form for using a
particular version of LLVm, and LLVM=<prefix> form for using custom
LLVM in a particular directory path.
- Clean up Makefiles
* tag 'kbuild-v5.18-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: Make $(LLVM) more flexible
kbuild: add --target to correctly cross-compile UAPI headers with Clang
fixdep: use fflush() and ferror() to ensure successful write to files
arch: syscalls: simplify uapi/kapi directory creation
usr/include: replace extra-y with always-y
certs: simplify empty certs creation in certs/Makefile
certs: include certs/signing_key.x509 unconditionally
kallsyms: ignore all local labels prefixed by '.L'
kconfig: fix missing '# end of' for empty menu
kconfig: add fflush() before ferror() check
kbuild: replace $(if A,A,B) with $(or A,B)
kbuild: Add environment variables for userprogs flags
kbuild: unify cmd_copy and cmd_shipped
|
|
$(shell ...) expands to empty. There is no need to assign it to _dummy.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
|
|
My kernel robot reports build error from drivers/iio/adc/da9150-gpadc.c,
drivers/iio/adc/da9150-gpadc.c:254:13: error: ‘DA9150_GPADC_CHAN_0x08’
undeclared here (not in a function); did you mean ‘DA9150_GPADC_CHAN_TBAT’?
254 | .channel = DA9150_GPADC_CHAN_##_id,
We define GPIOD in rb.h, in fact it should only be used in gpio.c, but
it affects the driver da9150-gpadc.c which goes against the original
intention of the design, just move it to its scope.
Fixes: 1b432840d0a4 ("MIPS: RB532: GPIO register offsets are relative to GPIOBASE")
Suggested-by: Jonathan Cameron <jic23@kernel.org>
Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reported-by: k2ci <kernel-bot@kylinos.cn>
Signed-off-by: Jackie Liu <liuyun01@kylinos.cn>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
kzalloc() is a memory allocation function which can return NULL when
some internal memory errors happen. So it is better to check the
return value of it to prevent potential wrong memory access or
memory leak.
Signed-off-by: Xiaoke Wang <xkernel.wang@foxmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
kzalloc() is a memory allocation function which can return NULL when
some internal memory errors happen. So it is better to check it to
prevent potential wrong memory access.
Signed-off-by: Xiaoke Wang <xkernel.wang@foxmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace
Pull ptrace cleanups from Eric Biederman:
"This set of changes removes tracehook.h, moves modification of all of
the ptrace fields inside of siglock to remove races, adds a missing
permission check to ptrace.c
The removal of tracehook.h is quite significant as it has been a major
source of confusion in recent years. Much of that confusion was around
task_work and TIF_NOTIFY_SIGNAL (which I have now decoupled making the
semantics clearer).
For people who don't know tracehook.h is a vestiage of an attempt to
implement uprobes like functionality that was never fully merged, and
was later superseeded by uprobes when uprobes was merged. For many
years now we have been removing what tracehook functionaly a little
bit at a time. To the point where anything left in tracehook.h was
some weird strange thing that was difficult to understand"
* tag 'ptrace-cleanups-for-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
ptrace: Remove duplicated include in ptrace.c
ptrace: Check PTRACE_O_SUSPEND_SECCOMP permission on PTRACE_SEIZE
ptrace: Return the signal to continue with from ptrace_stop
ptrace: Move setting/clearing ptrace_message into ptrace_stop
tracehook: Remove tracehook.h
resume_user_mode: Move to resume_user_mode.h
resume_user_mode: Remove #ifdef TIF_NOTIFY_RESUME in set_notify_resume
signal: Move set_notify_signal and clear_notify_signal into sched/signal.h
task_work: Decouple TIF_NOTIFY_SIGNAL and task_work
task_work: Call tracehook_notify_signal from get_signal on all architectures
task_work: Introduce task_work_pending
task_work: Remove unnecessary include from posix_timers.h
ptrace: Remove tracehook_signal_handler
ptrace: Remove arch_syscall_{enter,exit}_tracehook
ptrace: Create ptrace_report_syscall_{entry,exit} in ptrace.h
ptrace/arm: Rename tracehook_report_syscall report_syscall
ptrace: Move ptrace_report_syscall into ptrace.h
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver updates from Greg KH:
"Here is the big set of staging driver updates for 5.18-rc1.
Loads of tiny cleanups for almost all staging drivers in here, nothing
major at all. Highlights include:
- remove the ashmem Android driver. It is long-dead and if there are
any legacy userspace applications still using it, the Android
kernel images will maintain it, the community shouldn't care about
it anymore
- wfx wifi driver major cleanups. Should be ready to merge out of
staging soon, and will coordinate with the wifi maintainers after
-rc1 is out
- major cleanups and unwinding of the layers of the r8188eu driver.
It's amazing just how many unneeded layers of abstraction is in
there, just when we think it's done, another is found...
- lots of tiny coding style cleanups in many other staging drivers.
All have been in linux-next for a while with no reported problems"
* tag 'staging-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (455 commits)
staging: r8188eu: remove unnecessary memset in r8188eu
staging: greybus: introduce pwm_ops::apply
staging: rts5208: Resolve checkpatch.pl issues.
staging: sm750fb: fix naming style
staging: fbtft: Consider type of init sequence values in fbtft_init_display()
staging: fbtft: Constify buf parameter in fbtft_dbg_hex()
staging: mmal-vchiq: clear redundant item named bulk_scratch
mips: dts: ralink: add MT7621 SoC
staging: r8188eu: remove some unused local ieee80211 macros
staging: r8188eu: make rtl8188e_process_phy_info static
staging: r8188eu: remove unused function prototype
staging: r8188eu: remove three unused receive defines
staging: r8188eu: remove unnecessary initializations
staging: rtl8192e: Fix spelling mistake "RESQUEST" -> "REQUEST"
MAINTAINERS: remove the obsolete file entry for staging in ANDROID DRIVERS
staging: r8188eu: proper error handling in rtw_init_drv_sw
staging: r8188eu: call _cancel_timer_ex from _rtw_free_recv_priv
staging: vt6656: Removed unused variable vt3342_vnt_threshold
staging: vt6656: Removed unused variable bb_vga_0
staging: remove ashmem
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull pci updates from Bjorn Helgaas:
"Enumeration:
- Move the VGA arbiter from drivers/gpu to drivers/pci because it's
PCI-specific, not GPU-specific (Bjorn Helgaas)
- Select the default VGA device consistently whether it's enumerated
before or after VGA arbiter init, which fixes arches that enumerate
PCI devices late (Huacai Chen)
Resource management:
- Support BAR sizes up to 8TB (Dongdong Liu)
PCIe native device hotplug:
- Fix "Command Completed" tracking to avoid spurious timouts when
powering off empty slots (Liguang Zhang)
- Quirk Qualcomm devices that don't implement Command Completed
correctly, again to avoid spurious timeouts (Manivannan Sadhasivam)
Peer-to-peer DMA:
- Add Intel 3rd Gen Intel Xeon Scalable Processors to whitelist
(Michael J. Ruhl)
APM X-Gene PCIe controller driver:
- Revert generic DT parsing changes that broke some machines in the
field (Marc Zyngier)
Freescale i.MX6 PCIe controller driver:
- Allow controller probe to succeed even when no devices currently
present to allow hot-add later (Fabio Estevam)
- Enable power management on i.MX6QP (Richard Zhu)
- Assert CLKREQ# on i.MX8MM so enumeration doesn't hang when no
device is connected (Richard Zhu)
Marvell Aardvark PCIe controller driver:
- Fix MSI and MSI-X support (Marek Behún, Pali Rohár)
- Add support for ERR and PME interrupts (Pali Rohár)
Marvell MVEBU PCIe controller driver:
- Add DT binding and support for "num-lanes" (Pali Rohár)
- Add support for INTx interrupts (Pali Rohár)
Microsoft Hyper-V host bridge driver:
- Avoid unnecessary hypercalls when unmasking IRQs on ARM64 (Boqun
Feng)
Qualcomm PCIe controller driver:
- Add SM8450 DT binding and driver support (Dmitry Baryshkov)
Renesas R-Car PCIe controller driver:
- Help the controller get to the L1 state since the hardware can't do
it on its own (Marek Vasut)
- Return PCI_ERROR_RESPONSE (~0) for reads that fail on PCIe (Marek
Vasut)
SiFive FU740 PCIe controller driver:
- Drop redundant '-gpios' from DT GPIO lookup (Ben Dooks)
- Force 2.5GT/s for initial device probe (Ben Dooks)
Socionext UniPhier Pro5 controller driver:
- Add NX1 DT binding and driver support (Kunihiko Hayashi)
Synopsys DesignWare PCIe controller driver:
- Restore MSI configuration so MSI works after resume (Jisheng
Zhang)"
* tag 'pci-v5.18-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (94 commits)
x86/PCI: Add #includes to asm/pci_x86.h
PCI: ibmphp: Remove unused assignments
PCI: cpqphp: Remove unused assignments
PCI: fu740: Remove unused assignments
PCI: kirin: Remove unused assignments
PCI: Remove unused assignments
PCI: Declare pci_filp_private only when HAVE_PCI_MMAP
PCI: Avoid broken MSI on SB600 USB devices
PCI: fu740: Force 2.5GT/s for initial device probe
PCI: xgene: Revert "PCI: xgene: Fix IB window setup"
PCI: xgene: Revert "PCI: xgene: Use inbound resources for setup"
PCI: imx6: Assert i.MX8MM CLKREQ# even if no device present
PCI: imx6: Invoke the PHY exit function after PHY power off
PCI: rcar: Use PCI_SET_ERROR_RESPONSE after read which triggered an exception
PCI: rcar: Finish transition to L1 state in rcar_pcie_config_access()
PCI: dwc: Restore MSI Receiver mask during resume
PCI: fu740: Drop redundant '-gpios' from DT GPIO lookup
PCI/VGA: Replace full MIT license text with SPDX identifier
PCI/VGA: Use unsigned format string to print lock counts
PCI/VGA: Log bridge control messages when adding devices
...
|
|
Merge yet more updates from Andrew Morton:
"This is the material which was staged after willystuff in linux-next.
Subsystems affected by this patch series: mm (debug, selftests,
pagecache, thp, rmap, migration, kasan, hugetlb, pagemap, madvise),
and selftests"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (113 commits)
selftests: kselftest framework: provide "finished" helper
mm: madvise: MADV_DONTNEED_LOCKED
mm: fix race between MADV_FREE reclaim and blkdev direct IO read
mm: generalize ARCH_HAS_FILTER_PGPROT
mm: unmap_mapping_range_tree() with i_mmap_rwsem shared
mm: warn on deleting redirtied only if accounted
mm/huge_memory: remove stale locking logic from __split_huge_pmd()
mm/huge_memory: remove stale page_trans_huge_mapcount()
mm/swapfile: remove stale reuse_swap_page()
mm/khugepaged: remove reuse_swap_page() usage
mm/huge_memory: streamline COW logic in do_huge_pmd_wp_page()
mm: streamline COW logic in do_swap_page()
mm: slightly clarify KSM logic in do_swap_page()
mm: optimize do_wp_page() for fresh pages in local LRU pagevecs
mm: optimize do_wp_page() for exclusive pages in the swapcache
mm/huge_memory: make is_transparent_hugepage() static
userfaultfd/selftests: enable hugetlb remap and remove event testing
selftests/vm: add hugetlb madvise MADV_DONTNEED MADV_REMOVE test
mm: enable MADV_DONTNEED for hugetlb mappings
kasan: disable LOCKDEP when printing reports
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS updates from Thomas Bogendoerfer:
- added support for QCN550x (ath79)
- enabled KCSAN
- removed TX39XX support
- various cleanups and fixes
* tag 'mips_5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (31 commits)
MIPS: Fix build error for loongson64 and sgi-ip27
MIPS: ingenic: correct unit node address
MIPS: Fix wrong comments in asm/prom.h
MIPS: Remove redundant definitions of device_tree_init()
MIPS: Remove redundant check in device_tree_init()
MIPS: pgalloc: fix memory leak caused by pgd_free()
MIPS: RB532: fix return value of __setup handler
MIPS: Only use current_stack_pointer on GCC
MIPS: boot/compressed: Use array reference for image bounds
mips: cdmm: Fix refcount leak in mips_cdmm_phys_base
mips: remove reference to "newer Loongson-3"
mips: Always permit to build u-boot images
MIPS: Sanitise Cavium switch cases in TLB handler synthesizers
DEC: Limit PMAX memory probing to R3k systems
mips: DEC: honor CONFIG_MIPS_FP_SUPPORT=n
MIPS: fix fortify panic when copying asm exception handlers
mips: ralink: fix a refcount leak in ill_acc_of_setup()
mips: Implement "current_stack_pointer"
MIPS: Remove TX39XX support
MIPS: Modernize READ_IMPLIES_EXEC
...
|
|
MADV_DONTNEED historically rejects mlocked ranges, but with MLOCK_ONFAULT
and MCL_ONFAULT allowing to mlock without populating, there are valid use
cases for depopulating locked ranges as well.
Users mlock memory to protect secrets. There are allocators for secure
buffers that want in-use memory generally mlocked, but cleared and
invalidated memory to give up the physical pages. This could be done with
explicit munlock -> mlock calls on free -> alloc of course, but that adds
two unnecessary syscalls, heavy mmap_sem write locks, vma splits and
re-merges - only to get rid of the backing pages.
Users also mlockall(MCL_ONFAULT) to suppress sustained paging, but are
okay with on-demand initial population. It seems valid to selectively
free some memory during the lifetime of such a process, without having to
mess with its overall policy.
Why add a separate flag? Isn't this a pretty niche usecase?
- MADV_DONTNEED has been bailing on locked vmas forever. It's at least
conceivable that someone, somewhere is relying on mlock to protect
data from perhaps broader invalidation calls. Changing this behavior
now could lead to quiet data corruption.
- It also clarifies expectations around MADV_FREE and maybe
MADV_REMOVE. It avoids the situation where one quietly behaves
different than the others. MADV_FREE_LOCKED can be added later.
- The combination of mlock() and madvise() in the first place is
probably niche. But where it happens, I'd say that dropping pages
from a locked region once they don't contain secrets or won't page
anymore is much saner than relying on mlock to protect memory from
speculative or errant invalidation calls. It's just that we can't
change the default behavior because of the two previous points.
Given that, an explicit new flag seems to make the most sense.
[hannes@cmpxchg.org: fix mips build]
Link: https://lkml.kernel.org/r/20220304171912.305060-1-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Nadav Amit <nadav.amit@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"The sprinkling of SPI drivers is because we added a new one and Mark
sent us a SPI driver interface conversion pull request.
Core
----
- Introduce XDP multi-buffer support, allowing the use of XDP with
jumbo frame MTUs and combination with Rx coalescing offloads (LRO).
- Speed up netns dismantling (5x) and lower the memory cost a little.
Remove unnecessary per-netns sockets. Scope some lists to a netns.
Cut down RCU syncing. Use batch methods. Allow netdev registration
to complete out of order.
- Support distinguishing timestamp types (ingress vs egress) and
maintaining them across packet scrubbing points (e.g. redirect).
- Continue the work of annotating packet drop reasons throughout the
stack.
- Switch netdev error counters from an atomic to dynamically
allocated per-CPU counters.
- Rework a few preempt_disable(), local_irq_save() and busy waiting
sections problematic on PREEMPT_RT.
- Extend the ref_tracker to allow catching use-after-free bugs.
BPF
---
- Introduce "packing allocator" for BPF JIT images. JITed code is
marked read only, and used to be allocated at page granularity.
Custom allocator allows for more efficient memory use, lower iTLB
pressure and prevents identity mapping huge pages from getting
split.
- Make use of BTF type annotations (e.g. __user, __percpu) to enforce
the correct probe read access method, add appropriate helpers.
- Convert the BPF preload to use light skeleton and drop the
user-mode-driver dependency.
- Allow XDP BPF_PROG_RUN test infra to send real packets, enabling
its use as a packet generator.
- Allow local storage memory to be allocated with GFP_KERNEL if
called from a hook allowed to sleep.
- Introduce fprobe (multi kprobe) to speed up mass attachment (arch
bits to come later).
- Add unstable conntrack lookup helpers for BPF by using the BPF
kfunc infra.
- Allow cgroup BPF progs to return custom errors to user space.
- Add support for AF_UNIX iterator batching.
- Allow iterator programs to use sleepable helpers.
- Support JIT of add, and, or, xor and xchg atomic ops on arm64.
- Add BTFGen support to bpftool which allows to use CO-RE in kernels
without BTF info.
- Large number of libbpf API improvements, cleanups and deprecations.
Protocols
---------
- Micro-optimize UDPv6 Tx, gaining up to 5% in test on dummy netdev.
- Adjust TSO packet sizes based on min_rtt, allowing very low latency
links (data centers) to always send full-sized TSO super-frames.
- Make IPv6 flow label changes (AKA hash rethink) more configurable,
via sysctl and setsockopt. Distinguish between server and client
behavior.
- VxLAN support to "collect metadata" devices to terminate only
configured VNIs. This is similar to VLAN filtering in the bridge.
- Support inserting IPv6 IOAM information to a fraction of frames.
- Add protocol attribute to IP addresses to allow identifying where
given address comes from (kernel-generated, DHCP etc.)
- Support setting socket and IPv6 options via cmsg on ping6 sockets.
- Reject mis-use of ECN bits in IP headers as part of DSCP/TOS.
Define dscp_t and stop taking ECN bits into account in fib-rules.
- Add support for locked bridge ports (for 802.1X).
- tun: support NAPI for packets received from batched XDP buffs,
doubling the performance in some scenarios.
- IPv6 extension header handling in Open vSwitch.
- Support IPv6 control message load balancing in bonding, prevent
neighbor solicitation and advertisement from using the wrong port.
Support NS/NA monitor selection similar to existing ARP monitor.
- SMC
- improve performance with TCP_CORK and sendfile()
- support auto-corking
- support TCP_NODELAY
- MCTP (Management Component Transport Protocol)
- add user space tag control interface
- I2C binding driver (as specified by DMTF DSP0237)
- Multi-BSSID beacon handling in AP mode for WiFi.
- Bluetooth:
- handle MSFT Monitor Device Event
- add MGMT Adv Monitor Device Found/Lost events
- Multi-Path TCP:
- add support for the SO_SNDTIMEO socket option
- lots of selftest cleanups and improvements
- Increase the max PDU size in CAN ISOTP to 64 kB.
Driver API
----------
- Add HW counters for SW netdevs, a mechanism for devices which
offload packet forwarding to report packet statistics back to
software interfaces such as tunnels.
- Select the default NIC queue count as a fraction of number of
physical CPU cores, instead of hard-coding to 8.
- Expose devlink instance locks to drivers. Allow device layer of
drivers to use that lock directly instead of creating their own
which always runs into ordering issues in devlink callbacks.
- Add header/data split indication to guide user space enabling of
TCP zero-copy Rx.
- Allow configuring completion queue event size.
- Refactor page_pool to enable fragmenting after allocation.
- Add allocation and page reuse statistics to page_pool.
- Improve Multiple Spanning Trees support in the bridge to allow
reuse of topologies across VLANs, saving HW resources in switches.
- DSA (Distributed Switch Architecture):
- replay and offload of host VLAN entries
- offload of static and local FDB entries on LAG interfaces
- FDB isolation and unicast filtering
New hardware / drivers
----------------------
- Ethernet:
- LAN937x T1 PHYs
- Davicom DM9051 SPI NIC driver
- Realtek RTL8367S, RTL8367RB-VB switch and MDIO
- Microchip ksz8563 switches
- Netronome NFP3800 SmartNICs
- Fungible SmartNICs
- MediaTek MT8195 switches
- WiFi:
- mt76: MediaTek mt7916
- mt76: MediaTek mt7921u USB adapters
- brcmfmac: Broadcom BCM43454/6
- Mobile:
- iosm: Intel M.2 7360 WWAN card
Drivers
-------
- Convert many drivers to the new phylink API built for split PCS
designs but also simplifying other cases.
- Intel Ethernet NICs:
- add TTY for GNSS module for E810T device
- improve AF_XDP performance
- GTP-C and GTP-U filter offload
- QinQ VLAN support
- Mellanox Ethernet NICs (mlx5):
- support xdp->data_meta
- multi-buffer XDP
- offload tc push_eth and pop_eth actions
- Netronome Ethernet NICs (nfp):
- flow-independent tc action hardware offload (police / meter)
- AF_XDP
- Other Ethernet NICs:
- at803x: fiber and SFP support
- xgmac: mdio: preamble suppression and custom MDC frequencies
- r8169: enable ASPM L1.2 if system vendor flags it as safe
- macb/gem: ZynqMP SGMII
- hns3: add TX push mode
- dpaa2-eth: software TSO
- lan743x: multi-queue, mdio, SGMII, PTP
- axienet: NAPI and GRO support
- Mellanox Ethernet switches (mlxsw):
- source and dest IP address rewrites
- RJ45 ports
- Marvell Ethernet switches (prestera):
- basic routing offload
- multi-chain TC ACL offload
- NXP embedded Ethernet switches (ocelot & felix):
- PTP over UDP with the ocelot-8021q DSA tagging protocol
- basic QoS classification on Felix DSA switch using dcbnl
- port mirroring for ocelot switches
- Microchip high-speed industrial Ethernet (sparx5):
- offloading of bridge port flooding flags
- PTP Hardware Clock
- Other embedded switches:
- lan966x: PTP Hardward Clock
- qca8k: mdio read/write operations via crafted Ethernet packets
- Qualcomm 802.11ax WiFi (ath11k):
- add LDPC FEC type and 802.11ax High Efficiency data in radiotap
- enable RX PPDU stats in monitor co-exist mode
- Intel WiFi (iwlwifi):
- UHB TAS enablement via BIOS
- band disablement via BIOS
- channel switch offload
- 32 Rx AMPDU sessions in newer devices
- MediaTek WiFi (mt76):
- background radar detection
- thermal management improvements on mt7915
- SAR support for more mt76 platforms
- MBSSID and 6 GHz band on mt7915
- RealTek WiFi:
- rtw89: AP mode
- rtw89: 160 MHz channels and 6 GHz band
- rtw89: hardware scan
- Bluetooth:
- mt7921s: wake on Bluetooth, SCO over I2S, wide-band-speed (WBS)
- Microchip CAN (mcp251xfd):
- multiple RX-FIFOs and runtime configurable RX/TX rings
- internal PLL, runtime PM handling simplification
- improve chip detection and error handling after wakeup"
* tag 'net-next-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2521 commits)
llc: fix netdevice reference leaks in llc_ui_bind()
drivers: ethernet: cpsw: fix panic when interrupt coaleceing is set via ethtool
ice: don't allow to run ice_send_event_to_aux() in atomic ctx
ice: fix 'scheduling while atomic' on aux critical err interrupt
net/sched: fix incorrect vlan_push_eth dest field
net: bridge: mst: Restrict info size queries to bridge ports
net: marvell: prestera: add missing destroy_workqueue() in prestera_module_init()
drivers: net: xgene: Fix regression in CRC stripping
net: geneve: add missing netlink policy and size for IFLA_GENEVE_INNER_PROTO_INHERIT
net: dsa: fix missing host-filtered multicast addresses
net/mlx5e: Fix build warning, detected write beyond size of field
iwlwifi: mvm: Don't fail if PPAG isn't supported
selftests/bpf: Fix kprobe_multi test.
Revert "rethook: x86: Add rethook x86 implementation"
Revert "arm64: rethook: Add arm64 rethook implementation"
Revert "powerpc: Add rethook support"
Revert "ARM: rethook: Add rethook arm implementation"
netdevice: add missing dm_private kdoc
net: bridge: mst: prevent NULL deref in br_mst_info_size()
selftests: forwarding: Use same VRF for port and VLAN upper
...
|
|
Select HAVE_ARCH_NODEDATA_EXTENSION for loongson64 to fix build error
when CONFIG_NUMA=y:
mips64el-unknown-linux-gnu-ld: mm/page_alloc.o: in function `free_area_init':
(.init.text+0x1714): undefined reference to `node_data'
mips64el-unknown-linux-gnu-ld: (.init.text+0x1730): undefined reference to `node_data'
Also, select HAVE_ARCH_NODEDATA_EXTENSION for sgi-ip27 to fix build error:
mips64el-unknown-linux-gnu-ld: mm/page_alloc.o: in function `free_area_init':
page_alloc.c:(.init.text+0x1ba8): undefined reference to `node_data'
mips64el-unknown-linux-gnu-ld: page_alloc.c:(.init.text+0x1bcc): undefined reference to `node_data'
mips64el-unknown-linux-gnu-ld: page_alloc.c:(.init.text+0x1be4): undefined reference to `node_data'
mips64el-unknown-linux-gnu-ld: page_alloc.c:(.init.text+0x1bf4): undefined reference to `node_data'
Signed-off-by: Feiyang Chen <chenfeiyang@loongson.cn>
Reviewed-by: Huacai Chen <chenhuacai@kernel.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull asm-generic updates from Arnd Bergmann:
"There are three sets of updates for 5.18 in the asm-generic tree:
- The set_fs()/get_fs() infrastructure gets removed for good.
This was already gone from all major architectures, but now we can
finally remove it everywhere, which loses some particularly tricky
and error-prone code. There is a small merge conflict against a
parisc cleanup, the solution is to use their new version.
- The nds32 architecture ends its tenure in the Linux kernel.
The hardware is still used and the code is in reasonable shape, but
the mainline port is not actively maintained any more, as all
remaining users are thought to run vendor kernels that would never
be updated to a future release.
- A series from Masahiro Yamada cleans up some of the uapi header
files to pass the compile-time checks"
* tag 'asm-generic-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: (27 commits)
nds32: Remove the architecture
uaccess: remove CONFIG_SET_FS
ia64: remove CONFIG_SET_FS support
sh: remove CONFIG_SET_FS support
sparc64: remove CONFIG_SET_FS support
lib/test_lockup: fix kernel pointer check for separate address spaces
uaccess: generalize access_ok()
uaccess: fix type mismatch warnings from access_ok()
arm64: simplify access_ok()
m68k: fix access_ok for coldfire
MIPS: use simpler access_ok()
MIPS: Handle address errors for accesses above CPU max virtual user address
uaccess: add generic __{get,put}_kernel_nofault
nios2: drop access_ok() check from __put_user()
x86: use more conventional access_ok() definition
x86: remove __range_not_ok()
sparc64: add __{get,put}_kernel_nofault()
nds32: fix access_ok() checks in get/put_user
uaccess: fix nios2 and microblaze get_user_8()
sparc64: fix building assembly files
...
|
|
Pull folio updates from Matthew Wilcox:
- Rewrite how munlock works to massively reduce the contention on
i_mmap_rwsem (Hugh Dickins):
https://lore.kernel.org/linux-mm/8e4356d-9622-a7f0-b2c-f116b5f2efea@google.com/
- Sort out the page refcount mess for ZONE_DEVICE pages (Christoph
Hellwig):
https://lore.kernel.org/linux-mm/20220210072828.2930359-1-hch@lst.de/
- Convert GUP to use folios and make pincount available for order-1
pages. (Matthew Wilcox)
- Convert a few more truncation functions to use folios (Matthew
Wilcox)
- Convert page_vma_mapped_walk to use PFNs instead of pages (Matthew
Wilcox)
- Convert rmap_walk to use folios (Matthew Wilcox)
- Convert most of shrink_page_list() to use a folio (Matthew Wilcox)
- Add support for creating large folios in readahead (Matthew Wilcox)
* tag 'folio-5.18c' of git://git.infradead.org/users/willy/pagecache: (114 commits)
mm/damon: minor cleanup for damon_pa_young
selftests/vm/transhuge-stress: Support file-backed PMD folios
mm/filemap: Support VM_HUGEPAGE for file mappings
mm/readahead: Switch to page_cache_ra_order
mm/readahead: Align file mappings for non-DAX
mm/readahead: Add large folio readahead
mm: Support arbitrary THP sizes
mm: Make large folios depend on THP
mm: Fix READ_ONLY_THP warning
mm/filemap: Allow large folios to be added to the page cache
mm: Turn can_split_huge_page() into can_split_folio()
mm/vmscan: Convert pageout() to take a folio
mm/vmscan: Turn page_check_references() into folio_check_references()
mm/vmscan: Account large folios correctly
mm/vmscan: Optimise shrink_page_list for non-PMD-sized folios
mm/vmscan: Free non-shmem folios without splitting them
mm/rmap: Constify the rmap_walk_control argument
mm/rmap: Convert rmap_walk() to take a folio
mm: Turn page_anon_vma() into folio_anon_vma()
mm/rmap: Turn page_lock_anon_vma_read() into folio_lock_anon_vma_read()
...
|
|
Merge updates from Andrew Morton:
- A few misc subsystems: kthread, scripts, ntfs, ocfs2, block, and vfs
- Most the MM patches which precede the patches in Willy's tree: kasan,
pagecache, gup, swap, shmem, memcg, selftests, pagemap, mremap,
sparsemem, vmalloc, pagealloc, memory-failure, mlock, hugetlb,
userfaultfd, vmscan, compaction, mempolicy, oom-kill, migration, thp,
cma, autonuma, psi, ksm, page-poison, madvise, memory-hotplug, rmap,
zswap, uaccess, ioremap, highmem, cleanups, kfence, hmm, and damon.
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (227 commits)
mm/damon/sysfs: remove repeat container_of() in damon_sysfs_kdamond_release()
Docs/ABI/testing: add DAMON sysfs interface ABI document
Docs/admin-guide/mm/damon/usage: document DAMON sysfs interface
selftests/damon: add a test for DAMON sysfs interface
mm/damon/sysfs: support DAMOS stats
mm/damon/sysfs: support DAMOS watermarks
mm/damon/sysfs: support schemes prioritization
mm/damon/sysfs: support DAMOS quotas
mm/damon/sysfs: support DAMON-based Operation Schemes
mm/damon/sysfs: support the physical address space monitoring
mm/damon/sysfs: link DAMON for virtual address spaces monitoring
mm/damon: implement a minimal stub for sysfs-based DAMON interface
mm/damon/core: add number of each enum type values
mm/damon/core: allow non-exclusive DAMON start/stop
Docs/damon: update outdated term 'regions update interval'
Docs/vm/damon/design: update DAMON-Idle Page Tracking interference handling
Docs/vm/damon: call low level monitoring primitives the operations
mm/damon: remove unnecessary CONFIG_DAMON option
mm/damon/paddr,vaddr: remove damon_{p,v}a_{target_valid,set_operations}()
mm/damon/dbgfs-test: fix is_target_id() change
...
|
|
node_dev_init()
... and call node_dev_init() after memory_dev_init() from driver_init(),
so before any of the existing arch/subsys calls. All online nodes should
be known at that point: early during boot, arch code determines node and
zone ranges and sets the relevant nodes online; usually this happens in
setup_arch().
This is in line with memory_dev_init(), which initializes the memory
device subsystem and creates all memory block devices.
Similar to memory_dev_init(), panic() if anything goes wrong, we don't
want to continue with such basic initialization errors.
The important part is that node_dev_init() gets called after
memory_dev_init() and after cpu_dev_init(), but before any of the relevant
archs call register_cpu() to register the new cpu device under the node
device. The latter should be the case for the current users of
topology_init().
Link: https://lkml.kernel.org/r/20220203105212.30385-1-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Tested-by: Anatoly Pugachev <matorola@gmail.com> (sparc64)
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Rich Felker <dalias@libc.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Pull nfsd updates from Chuck Lever:
"New features:
- NFSv3 support in NFSD is now always built
- Added NFSD support for the NFSv4 birth-time file attribute
- Added support for storing and displaying sockaddrs in trace points
- NFSD now recognizes RPC_AUTH_TLS probes
Performance improvements:
- Optimized the svc transport enqueuing mechanism
- Added micro-optimizations for the duplicate reply cache
Notable bug fixes:
- Allocation of the NFSD file cache hash table is more reliable"
* tag 'nfsd-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux: (30 commits)
nfsd: fix using the correct variable for sizeof()
nfsd: use correct format characters
NFSD: prevent integer overflow on 32 bit systems
NFSD: prevent underflow in nfssvc_decode_writeargs()
fs/lock: documentation cleanup. Replace inode->i_lock with flc_lock.
NFSD: Fix nfsd_breaker_owns_lease() return values
NFSD: Clean up _lm_ operation names
arch: Remove references to CONFIG_NFSD_V3 in the default configs
NFSD: Remove CONFIG_NFSD_V3
nfsd: more robust allocation failure handling in nfsd_file_cache_init
SUNRPC: Teach server to recognize RPC_AUTH_TLS
NFSD: Move svc_serv_ops::svo_function into struct svc_serv
NFSD: Remove svc_serv_ops::svo_module
SUNRPC: Remove svc_shutdown_net()
SUNRPC: Rename svc_close_xprt()
SUNRPC: Rename svc_create_xprt()
SUNRPC: Remove svo_shutdown method
SUNRPC: Merge svc_do_enqueue_xprt() into svc_enqueue_xprt()
SUNRPC: Remove the .svo_enqueue_xprt method
SUNRPC: Record endpoint information in trace log
...
|
|
Whether or not the platform supports PMD sized pages, we need to
provide pmd_pfn() for an upcoming patch.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
|
|
Unit node addresses should not have leading 0x:
Warning (unit_address_format): /nemc@13410000/efuse@d0/eth-mac-addr@0x22: unit name should not have leading "0x"
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
The MT7621 system-on-a-chip includes an 880 MHz MIPS1004Kc dual-core CPU,
a 5-port 10/100/1000 switch/PHY and one RGMII.
Add the devicetrees for GB-PC1 and GB-PC2 devices which use MT7621 SoC.
Acked-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Link: https://lore.kernel.org/r/20220315160149.3617-1-arinc.unal@arinc9.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In arch/mips/include/asm/prom.h, it should use "!CONFIG_USE_OF"
after #else and #endif.
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
There exists many same definitions of device_tree_init() for various
platforms, add a weak function in arch/mips/kernel/prom.c to clean
up the related code.
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
In device_tree_init(), unflatten_and_copy_device_tree() checks
initial_boot_params, so remove the redundant check.
drivers/of/fdt.c
void __init unflatten_and_copy_device_tree(void)
{
int size;
void *dt;
if (!initial_boot_params) {
pr_warn("No valid device tree found, continuing without\n");
return;
}
...
}
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
pgd page is freed by generic implementation pgd_free() since commit
f9cb654cb550 ("asm-generic: pgalloc: provide generic pgd_free()"),
however, there are scenarios that the system uses more than one page as
the pgd table, in such cases the generic implementation pgd_free() won't
be applicable anymore. For example, when PAGE_SIZE_4KB is enabled and
MIPS_VA_BITS_48 is not enabled in a 64bit system, the macro "PGD_ORDER"
will be set as "1", which will cause allocating two pages as the pgd
table. Well, at the same time, the generic implementation pgd_free()
just free one pgd page, which will result in the memory leak.
The memory leak can be easily detected by executing shell command:
"while true; do ls > /dev/null; grep MemFree /proc/meminfo; done"
Fixes: f9cb654cb550 ("asm-generic: pgalloc: provide generic pgd_free()")
Signed-off-by: Yaliang Wang <Yaliang.Wang@windriver.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
__setup() handlers should return 1 to obsolete_checksetup() in
init/main.c to indicate that the boot option has been handled.
A return of 0 causes the boot option/value to be listed as an Unknown
kernel parameter and added to init's (limited) argument or environment
strings. Also, error return codes don't mean anything to
obsolete_checksetup() -- only non-zero (usually 1) or zero.
So return 1 from setup_kmac().
Fixes: 9e21c7e40b7e ("MIPS: RB532: Replace parse_mac_addr() with mac_pton().")
Fixes: 73b4390fb234 ("[MIPS] Routerboard 532: Support for base system")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
From: Igor Zhbanov <i.zhbanov@omprussia.ru>
Link: lore.kernel.org/r/64644a2f-4a20-bab3-1e15-3b2cdd0defe3@omprussia.ru
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: linux-mips@vger.kernel.org
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Phil Sutter <n0-1@freewrt.org>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Daniel Walter <dwalter@google.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Unfortunately, Clang did not have support for "sp" as a global register
definition, and was crashing after the addition of current_stack_pointer.
This has been fixed in Clang 14, but earlier Clang versions need to
avoid this code, so add a versioned test and revert back to the
open-coded asm instances. Fixes Clang build error:
fatal error: error in backend: Invalid register name global variable
Fixes: 200ed341b864 ("mips: Implement "current_stack_pointer"")
Reported-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/lkml/YikTQRql+il3HbrK@dev-arch.thelio-3990X
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Yanteng Si <siyanteng01@gmail.com>
Cc: linux-mips@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
As done with other image addresses in other architectures, use an
explicit flexible array instead of "address of char", which can trip
bounds checking done by the compiler. Found when building with
-Warray-bounds:
In file included from ./include/linux/byteorder/little_endian.h:5,
from ./arch/mips/include/uapi/asm/byteorder.h:15,
from ./arch/mips/include/asm/bitops.h:21,
from ./include/linux/bitops.h:33,
from ./include/linux/kernel.h:22,
from arch/mips/boot/compressed/decompress.c:13:
arch/mips/boot/compressed/decompress.c: In function 'decompress_kernel':
./include/asm-generic/unaligned.h:14:8: warning: array subscript -1 is outside array bounds of 'unsigned char[1]' [-Warray-bounds]
14 | __pptr->x; \
| ~~~~~~^~~
./include/uapi/linux/byteorder/little_endian.h:35:51: note: in definition of macro '__le32_to_cpu'
35 | #define __le32_to_cpu(x) ((__force __u32)(__le32)(x))
| ^
./include/asm-generic/unaligned.h:32:21: note: in expansion of macro '__get_unaligned_t'
32 | return le32_to_cpu(__get_unaligned_t(__le32, p));
| ^~~~~~~~~~~~~~~~~
arch/mips/boot/compressed/decompress.c:29:37: note: while referencing '__image_end'
29 | extern unsigned char __image_begin, __image_end;
| ^~~~~~~~~~~
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: linux-mips@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
CONFIG_NFSD_V3 has been removed. NFSD support for NFSv3 can no
longer be disabled.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Move set_notify_resume and tracehook_notify_resume into resume_user_mode.h.
While doing that rename tracehook_notify_resume to resume_user_mode_work.
Update all of the places that included tracehook.h for these functions to
include resume_user_mode.h instead.
Update all of the callers of tracehook_notify_resume to call
resume_user_mode_work.
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lkml.kernel.org/r/20220309162454.123006-12-ebiederm@xmission.com
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
|
|
Rename tracehook_report_syscall_{entry,exit} to
ptrace_report_syscall_{entry,exit} and place them in ptrace.h
There is no longer any generic tracehook infractructure so make
these ptrace specific functions ptrace specific.
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lkml.kernel.org/r/20220309162454.123006-3-ebiederm@xmission.com
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
|
|
Newest Loongson-3 processors have moved to use LoongArch architecture.
Sadly, the LL/SC issue is still existing on both latest Loongson-3
processors using MIPS64 (Loongson-3A4000) and LoongArch
(Loongson-3A5000).
As it's very unlikely there will be new Loongson-3 processors using
MIPS64, let's stop people from false hoping.
Signed-off-by: Xi Ruoyao <xry111@mengyan1223.wang>
Cc: Huacai Chen <chenhuacai@kernel.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
The platforms where the kernel should be loaded above 0x8000.0000 do not
support loading u-boot images, that doesn't mean that we shouldn't be
able to generate them.
Additionally, since commit 79876cc1d7b8 ("MIPS: new Kconfig option
ZBOOT_LOAD_ADDRESS"), the $(zload-y) variable was no longer hardcoded,
which made it impossible to use the uzImage.bin target.
Fixes: 79876cc1d7b8 ("MIPS: new Kconfig option ZBOOT_LOAD_ADDRESS")
Cc: <stable@vger.kernel.org>
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
It makes no sense to fall through to `break'. Therefore reorder the
switch statements so as to have the Cavium cases first, followed by the
default case, which improves readability and pacifies code analysis
tools. No change in semantics, assembly produced is exactly the same.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Fixes: bc431d2153cc ("MIPS: Fix fall-through warnings for Clang")
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Recent tightening of the opcode table in binutils so as to consistently
disallow the assembly or disassembly of CP0 instructions not supported
by the processor architecture chosen has caused a regression like below:
arch/mips/dec/prom/locore.S: Assembler messages:
arch/mips/dec/prom/locore.S:29: Error: opcode not supported on this processor: r4600 (mips3) `rfe'
in a piece of code used to probe for memory with PMAX DECstation models,
which have non-REX firmware. Those computers always have an R2000 CPU
and consequently the exception handler used in memory probing uses the
RFE instruction, which those processors use.
While adding 64-bit support this code was correctly excluded for 64-bit
configurations, however it should have also been excluded for irrelevant
32-bit configurations. Do this now then, and only enable PMAX memory
probing for R3k systems.
Reported-by: Jan-Benedict Glaw <jbglaw@lug-owl.de>
Reported-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org # v2.6.12+
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Include the DECstation interrupt handler in opting out of
FPU support.
Fixes a linker error:
mips-linux-ld: arch/mips/dec/int-handler.o: in function `fpu':
(.text+0x148): undefined reference to `handle_fpe_int'
Fixes: 183b40f992c8 ("MIPS: Allow FP support to be disabled")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Paul Burton <paulburton@kernel.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Maciej W. Rozycki <macro@orcam.me.uk>
Cc: linux-mips@vger.kernel.org
Acked-by: Maciej W. Rozycki <macro@orcam.me.uk>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
With KCFLAGS="-O3", I was able to trigger a fortify-source
memcpy() overflow panic on set_vi_srs_handler().
Although O3 level is not supported in the mainline, under some
conditions that may've happened with any optimization settings,
it's just a matter of inlining luck. The panic itself is correct,
more precisely, 50/50 false-positive and not at the same time.
From the one side, no real overflow happens. Exception handler
defined in asm just gets copied to some reserved places in the
memory.
But the reason behind is that C code refers to that exception
handler declares it as `char`, i.e. something of 1 byte length.
It's obvious that the asm function itself is way more than 1 byte,
so fortify logics thought we are going to past the symbol declared.
The standard way to refer to asm symbols from C code which is not
supposed to be called from C is to declare them as
`extern const u8[]`. This is fully correct from any point of view,
as any code itself is just a bunch of bytes (including 0 as it is
for syms like _stext/_etext/etc.), and the exact size is not known
at the moment of compilation.
Adjust the type of the except_vec_vi_*() and related variables.
Make set_handler() take `const` as a second argument to avoid
cast-away warnings and give a little more room for optimization.
Signed-off-by: Alexander Lobakin <alobakin@pm.me>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
net/batman-adv/hard-interface.c
commit 690bb6fb64f5 ("batman-adv: Request iflink once in batadv-on-batadv check")
commit 6ee3c393eeb7 ("batman-adv: Demote batadv-on-batadv skip error message")
https://lore.kernel.org/all/20220302163049.101957-1-sw@simonwunderlich.de/
net/smc/af_smc.c
commit 4d08b7b57ece ("net/smc: Fix cleanup when register ULP fails")
commit 462791bbfa35 ("net/smc: add sysctl interface for SMC")
https://lore.kernel.org/all/20220302112209.355def40@canb.auug.org.au/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
