Age | Commit message (Collapse) | Author | Files | Lines |
|
BMIPS is one of the few platforms that do change the exception base.
After commit 2dcb39645441 ("memblock: do not start bottom-up allocations
with kernel_end") we started seeing BMIPS boards fail to boot with the
built-in FDT being corrupted.
Before the cited commit, early allocations would be in the [kernel_end,
RAM_END] range, but after commit they would be within [RAM_START +
PAGE_SIZE, RAM_END].
The custom exception base handler that is installed by
bmips_ebase_setup() done for BMIPS5000 CPUs ends-up trampling on the
memory region allocated by unflatten_and_copy_device_tree() thus
corrupting the FDT used by the kernel.
To fix this, we need to perform an early reservation of the custom
exception space. Additional we reserve the first 4k (1k for R3k) for
either normal exception vector space (legacy CPUs) or special vectors
like cache exceptions.
Huge thanks to Serge for analysing and proposing a solution to this
issue.
Fixes: 2dcb39645441 ("memblock: do not start bottom-up allocations with kernel_end")
Reported-by: Kamal Dasu <kdasu.kdev@gmail.com>
Debugged-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Acked-by: Mike Rapoport <rppt@linux.ibm.com>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
The devicetree specification requires 8-byte alignment in
memory. This is now enforced by libfdt since commit 79edff12060f
("scripts/dtc: Update to upstream version v1.6.0-51-g183df9e9c2b9")
which included the upstream commit 5e735860c478 ("libfdt: Check for
8-byte address alignment in fdt_ro_probe_()").
This broke the MIPS raw appended DTBs which would be appended to
the image immediately following the initramfs section. This ends
with a 32bit size, resulting in a 4-byte alignment of the DTB.
Fix by padding with zeroes to 8-bytes when MIPS_RAW_APPENDED_DTB
is defined.
Fixes: 79edff12060f ("scripts/dtc: Update to upstream version v1.6.0-51-g183df9e9c2b9")
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Frank Rowand <frowand.list@gmail.com>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
The MIPS Poly1305 implementation is generic MIPS code written such as to
support down to the original MIPS I and MIPS III ISA for the 32-bit and
64-bit variant respectively. Lift the current limitation then to enable
code for MIPSr1 ISA or newer processors only and have it available for
all MIPS processors.
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Fixes: a11d055e7a64 ("crypto: mips/poly1305 - incorporate OpenSSL/CRYPTOGAMS optimized implementation")
Cc: stable@vger.kernel.org # v5.5+
Acked-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Since 5.12-rc1, the Device Tree blob must now be properly aligned.
Therefore, the decompress routine must be careful to copy the blob at
the next aligned address after the kernel image.
This commit fixes the kernel sometimes not booting with a Device Tree
blob appended to it.
Fixes: 79edff12060f ("scripts/dtc: Update to upstream version v1.6.0-51-g183df9e9c2b9")
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Pull io_uring thread rewrite from Jens Axboe:
"This converts the io-wq workers to be forked off the tasks in question
instead of being kernel threads that assume various bits of the
original task identity.
This kills > 400 lines of code from io_uring/io-wq, and it's the worst
part of the code. We've had several bugs in this area, and the worry
is always that we could be missing some pieces for file types doing
unusual things (recent /dev/tty example comes to mind, userfaultfd
reads installing file descriptors is another fun one... - both of
which need special handling, and I bet it's not the last weird oddity
we'll find).
With these identical workers, we can have full confidence that we're
never missing anything. That, in itself, is a huge win. Outside of
that, it's also more efficient since we're not wasting space and code
on tracking state, or switching between different states.
I'm sure we're going to find little things to patch up after this
series, but testing has been pretty thorough, from the usual
regression suite to production. Any issue that may crop up should be
manageable.
There's also a nice series of further reductions we can do on top of
this, but I wanted to get the meat of it out sooner rather than later.
The general worry here isn't that it's fundamentally broken. Most of
the little issues we've found over the last week have been related to
just changes in how thread startup/exit is done, since that's the main
difference between using kthreads and these kinds of threads. In fact,
if all goes according to plan, I want to get this into the 5.10 and
5.11 stable branches as well.
That said, the changes outside of io_uring/io-wq are:
- arch setup, simple one-liner to each arch copy_thread()
implementation.
- Removal of net and proc restrictions for io_uring, they are no
longer needed or useful"
* tag 'io_uring-worker.v3-2021-02-25' of git://git.kernel.dk/linux-block: (30 commits)
io-wq: remove now unused IO_WQ_BIT_ERROR
io_uring: fix SQPOLL thread handling over exec
io-wq: improve manager/worker handling over exec
io_uring: ensure SQPOLL startup is triggered before error shutdown
io-wq: make buffered file write hashed work map per-ctx
io-wq: fix race around io_worker grabbing
io-wq: fix races around manager/worker creation and task exit
io_uring: ensure io-wq context is always destroyed for tasks
arch: ensure parisc/powerpc handle PF_IO_WORKER in copy_thread()
io_uring: cleanup ->user usage
io-wq: remove nr_process accounting
io_uring: flag new native workers with IORING_FEAT_NATIVE_WORKERS
net: remove cmsg restriction from io_uring based send/recvmsg calls
Revert "proc: don't allow async path resolution of /proc/self components"
Revert "proc: don't allow async path resolution of /proc/thread-self components"
io_uring: move SQPOLL thread io-wq forked worker
io-wq: make io_wq_fork_thread() available to other users
io-wq: only remove worker from free_list, if it was there
io_uring: remove io_identity
io_uring: remove any grabbing of context
...
|
|
Merge more updates from Andrew Morton:
"118 patches:
- The rest of MM.
Includes kfence - another runtime memory validator. Not as thorough
as KASAN, but it has unmeasurable overhead and is intended to be
usable in production builds.
- Everything else
Subsystems affected by this patch series: alpha, procfs, sysctl,
misc, core-kernel, MAINTAINERS, lib, bitops, checkpatch, init,
coredump, seq_file, gdb, ubsan, initramfs, and mm (thp, cma,
vmstat, memory-hotplug, mlock, rmap, zswap, zsmalloc, cleanups,
kfence, kasan2, and pagemap2)"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (118 commits)
MIPS: make userspace mapping young by default
initramfs: panic with memory information
ubsan: remove overflow checks
kgdb: fix to kill breakpoints on initmem after boot
scripts/gdb: fix list_for_each
x86: fix seq_file iteration for pat/memtype.c
seq_file: document how per-entry resources are managed.
fs/coredump: use kmap_local_page()
init/Kconfig: fix a typo in CC_VERSION_TEXT help text
init: clean up early_param_on_off() macro
init/version.c: remove Version_<LINUX_VERSION_CODE> symbol
checkpatch: do not apply "initialise globals to 0" check to BPF progs
checkpatch: don't warn about colon termination in linker scripts
checkpatch: add kmalloc_array_node to unnecessary OOM message check
checkpatch: add warning for avoiding .L prefix symbols in assembly files
checkpatch: improve TYPECAST_INT_CONSTANT test message
checkpatch: prefer ftrace over function entry/exit printks
checkpatch: trivial style fixes
checkpatch: ignore warning designated initializers using NR_CPUS
checkpatch: improve blank line after declaration test
...
|
|
MIPS page fault path(except huge page) takes 3 exceptions (1 TLB Miss + 2
TLB Invalid), butthe second TLB Invalid exception is just triggered by
__update_tlb from do_page_fault writing tlb without _PAGE_VALID set. With
this patch, user space mapping prot is made young by default (with both
_PAGE_VALID and _PAGE_YOUNG set), and it only take 1 TLB Miss + 1 TLB
Invalid exception
Remove pte_sw_mkyoung without polluting MM code and make page fault delay
of MIPS on par with other architecture
Link: https://lkml.kernel.org/r/20210204013942.8398-1-huangpei@loongson.cn
Signed-off-by: Huang Pei <huangpei@loongson.cn>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Acked-by: <huangpei@loongson.cn>
Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: <ambrosehua@gmail.com>
Cc: Bibo Mao <maobibo@loongson.cn>
Cc: Jiaxun Yang <jiaxun.yang@flygoat.com>
Cc: Paul Burton <paulburton@kernel.org>
Cc: Li Xuefeng <lixuefeng@loongson.cn>
Cc: Yang Tiezhu <yangtiezhu@loongson.cn>
Cc: Gao Juxin <gaojuxin@loongson.cn>
Cc: Fuxin Zhang <zhangfx@lemote.com>
Cc: Huacai Chen <chenhc@lemote.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull more MIPS updates from Thomas Bogendoerfer:
- added n64 block driver
- fix for ubsan warnings
- fix for bcm63xx platform
- update of linux-mips mailinglist
* tag 'mips_5.12_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
arch: mips: update references to current linux-mips list
mips: bmips: init clocks earlier
vmlinux.lds.h: catch even more instrumentation symbols into .data
n64: store dev instance into disk private data
n64: cleanup n64cart_probe()
n64: cosmetics changes
n64: remove curly brackets
n64: use sector SECTOR_SHIFT instead 512
n64: use enums for reg
n64: move module param at the top
n64: move module info at the end
n64: use pr_fmt to avoid duplicate string
block: Add n64 cart driver
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Fix false-positive build warnings for ARCH=ia64 builds
- Optimize dictionary size for module compression with xz
- Check the compiler and linker versions in Kconfig
- Fix misuse of extra-y
- Support DWARF v5 debug info
- Clamp SUBLEVEL to 255 because stable releases 4.4.x and 4.9.x
exceeded the limit
- Add generic syscall{tbl,hdr}.sh for cleanups across arches
- Minor cleanups of genksyms
- Minor cleanups of Kconfig
* tag 'kbuild-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (38 commits)
initramfs: Remove redundant dependency of RD_ZSTD on BLK_DEV_INITRD
kbuild: remove deprecated 'always' and 'hostprogs-y/m'
kbuild: parse C= and M= before changing the working directory
kbuild: reuse this-makefile to define abs_srctree
kconfig: unify rule of config, menuconfig, nconfig, gconfig, xconfig
kconfig: omit --oldaskconfig option for 'make config'
kconfig: fix 'invalid option' for help option
kconfig: remove dead code in conf_askvalue()
kconfig: clean up nested if-conditionals in check_conf()
kconfig: Remove duplicate call to sym_get_string_value()
Makefile: Remove # characters from compiler string
Makefile: reuse CC_VERSION_TEXT
kbuild: check the minimum linker version in Kconfig
kbuild: remove ld-version macro
scripts: add generic syscallhdr.sh
scripts: add generic syscalltbl.sh
arch: syscalls: remove $(srctree)/ prefix from syscall tables
arch: syscalls: add missing FORCE and fix 'targets' to make if_changed work
gen_compile_commands: prune some directories
kbuild: simplify access to the kernel's version
...
|
|
Function set_pmd_at is to set pmd entry, if tlb entry need to be flushed,
there exists pmdp_huge_clear_flush alike function before set_pmd_at is
called. So it is not necessary to call flush_tlb_all in this function.
In these scenarios, tlb for the pmd range needs to be flushed:
- privilege degrade such as wrprotect is set on the pmd entry
- pmd entry is cleared
- there is exception if set_pmd_at is issued by dup_mmap, since
flush_tlb_mm is called for parent process, it is not necessary to
flush tlb in function copy_huge_pmd.
Link: http://lkml.kernel.org/r/1592990792-1923-3-git-send-email-maobibo@loongson.cn
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Daniel Silsby <dansilsby@gmail.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Paul Burton <paulburton@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux
Pull idmapped mounts from Christian Brauner:
"This introduces idmapped mounts which has been in the making for some
time. Simply put, different mounts can expose the same file or
directory with different ownership. This initial implementation comes
with ports for fat, ext4 and with Christoph's port for xfs with more
filesystems being actively worked on by independent people and
maintainers.
Idmapping mounts handle a wide range of long standing use-cases. Here
are just a few:
- Idmapped mounts make it possible to easily share files between
multiple users or multiple machines especially in complex
scenarios. For example, idmapped mounts will be used in the
implementation of portable home directories in
systemd-homed.service(8) where they allow users to move their home
directory to an external storage device and use it on multiple
computers where they are assigned different uids and gids. This
effectively makes it possible to assign random uids and gids at
login time.
- It is possible to share files from the host with unprivileged
containers without having to change ownership permanently through
chown(2).
- It is possible to idmap a container's rootfs and without having to
mangle every file. For example, Chromebooks use it to share the
user's Download folder with their unprivileged containers in their
Linux subsystem.
- It is possible to share files between containers with
non-overlapping idmappings.
- Filesystem that lack a proper concept of ownership such as fat can
use idmapped mounts to implement discretionary access (DAC)
permission checking.
- They allow users to efficiently changing ownership on a per-mount
basis without having to (recursively) chown(2) all files. In
contrast to chown (2) changing ownership of large sets of files is
instantenous with idmapped mounts. This is especially useful when
ownership of a whole root filesystem of a virtual machine or
container is changed. With idmapped mounts a single syscall
mount_setattr syscall will be sufficient to change the ownership of
all files.
- Idmapped mounts always take the current ownership into account as
idmappings specify what a given uid or gid is supposed to be mapped
to. This contrasts with the chown(2) syscall which cannot by itself
take the current ownership of the files it changes into account. It
simply changes the ownership to the specified uid and gid. This is
especially problematic when recursively chown(2)ing a large set of
files which is commong with the aforementioned portable home
directory and container and vm scenario.
- Idmapped mounts allow to change ownership locally, restricting it
to specific mounts, and temporarily as the ownership changes only
apply as long as the mount exists.
Several userspace projects have either already put up patches and
pull-requests for this feature or will do so should you decide to pull
this:
- systemd: In a wide variety of scenarios but especially right away
in their implementation of portable home directories.
https://systemd.io/HOME_DIRECTORY/
- container runtimes: containerd, runC, LXD:To share data between
host and unprivileged containers, unprivileged and privileged
containers, etc. The pull request for idmapped mounts support in
containerd, the default Kubernetes runtime is already up for quite
a while now: https://github.com/containerd/containerd/pull/4734
- The virtio-fs developers and several users have expressed interest
in using this feature with virtual machines once virtio-fs is
ported.
- ChromeOS: Sharing host-directories with unprivileged containers.
I've tightly synced with all those projects and all of those listed
here have also expressed their need/desire for this feature on the
mailing list. For more info on how people use this there's a bunch of
talks about this too. Here's just two recent ones:
https://www.cncf.io/wp-content/uploads/2020/12/Rootless-Containers-in-Gitpod.pdf
https://fosdem.org/2021/schedule/event/containers_idmap/
This comes with an extensive xfstests suite covering both ext4 and
xfs:
https://git.kernel.org/brauner/xfstests-dev/h/idmapped_mounts
It covers truncation, creation, opening, xattrs, vfscaps, setid
execution, setgid inheritance and more both with idmapped and
non-idmapped mounts. It already helped to discover an unrelated xfs
setgid inheritance bug which has since been fixed in mainline. It will
be sent for inclusion with the xfstests project should you decide to
merge this.
In order to support per-mount idmappings vfsmounts are marked with
user namespaces. The idmapping of the user namespace will be used to
map the ids of vfs objects when they are accessed through that mount.
By default all vfsmounts are marked with the initial user namespace.
The initial user namespace is used to indicate that a mount is not
idmapped. All operations behave as before and this is verified in the
testsuite.
Based on prior discussions we want to attach the whole user namespace
and not just a dedicated idmapping struct. This allows us to reuse all
the helpers that already exist for dealing with idmappings instead of
introducing a whole new range of helpers. In addition, if we decide in
the future that we are confident enough to enable unprivileged users
to setup idmapped mounts the permission checking can take into account
whether the caller is privileged in the user namespace the mount is
currently marked with.
The user namespace the mount will be marked with can be specified by
passing a file descriptor refering to the user namespace as an
argument to the new mount_setattr() syscall together with the new
MOUNT_ATTR_IDMAP flag. The system call follows the openat2() pattern
of extensibility.
The following conditions must be met in order to create an idmapped
mount:
- The caller must currently have the CAP_SYS_ADMIN capability in the
user namespace the underlying filesystem has been mounted in.
- The underlying filesystem must support idmapped mounts.
- The mount must not already be idmapped. This also implies that the
idmapping of a mount cannot be altered once it has been idmapped.
- The mount must be a detached/anonymous mount, i.e. it must have
been created by calling open_tree() with the OPEN_TREE_CLONE flag
and it must not already have been visible in the filesystem.
The last two points guarantee easier semantics for userspace and the
kernel and make the implementation significantly simpler.
By default vfsmounts are marked with the initial user namespace and no
behavioral or performance changes are observed.
The manpage with a detailed description can be found here:
https://git.kernel.org/brauner/man-pages/c/1d7b902e2875a1ff342e036a9f866a995640aea8
In order to support idmapped mounts, filesystems need to be changed
and mark themselves with the FS_ALLOW_IDMAP flag in fs_flags. The
patches to convert individual filesystem are not very large or
complicated overall as can be seen from the included fat, ext4, and
xfs ports. Patches for other filesystems are actively worked on and
will be sent out separately. The xfstestsuite can be used to verify
that port has been done correctly.
The mount_setattr() syscall is motivated independent of the idmapped
mounts patches and it's been around since July 2019. One of the most
valuable features of the new mount api is the ability to perform
mounts based on file descriptors only.
Together with the lookup restrictions available in the openat2()
RESOLVE_* flag namespace which we added in v5.6 this is the first time
we are close to hardened and race-free (e.g. symlinks) mounting and
path resolution.
While userspace has started porting to the new mount api to mount
proper filesystems and create new bind-mounts it is currently not
possible to change mount options of an already existing bind mount in
the new mount api since the mount_setattr() syscall is missing.
With the addition of the mount_setattr() syscall we remove this last
restriction and userspace can now fully port to the new mount api,
covering every use-case the old mount api could. We also add the
crucial ability to recursively change mount options for a whole mount
tree, both removing and adding mount options at the same time. This
syscall has been requested multiple times by various people and
projects.
There is a simple tool available at
https://github.com/brauner/mount-idmapped
that allows to create idmapped mounts so people can play with this
patch series. I'll add support for the regular mount binary should you
decide to pull this in the following weeks:
Here's an example to a simple idmapped mount of another user's home
directory:
u1001@f2-vm:/$ sudo ./mount --idmap both:1000:1001:1 /home/ubuntu/ /mnt
u1001@f2-vm:/$ ls -al /home/ubuntu/
total 28
drwxr-xr-x 2 ubuntu ubuntu 4096 Oct 28 22:07 .
drwxr-xr-x 4 root root 4096 Oct 28 04:00 ..
-rw------- 1 ubuntu ubuntu 3154 Oct 28 22:12 .bash_history
-rw-r--r-- 1 ubuntu ubuntu 220 Feb 25 2020 .bash_logout
-rw-r--r-- 1 ubuntu ubuntu 3771 Feb 25 2020 .bashrc
-rw-r--r-- 1 ubuntu ubuntu 807 Feb 25 2020 .profile
-rw-r--r-- 1 ubuntu ubuntu 0 Oct 16 16:11 .sudo_as_admin_successful
-rw------- 1 ubuntu ubuntu 1144 Oct 28 00:43 .viminfo
u1001@f2-vm:/$ ls -al /mnt/
total 28
drwxr-xr-x 2 u1001 u1001 4096 Oct 28 22:07 .
drwxr-xr-x 29 root root 4096 Oct 28 22:01 ..
-rw------- 1 u1001 u1001 3154 Oct 28 22:12 .bash_history
-rw-r--r-- 1 u1001 u1001 220 Feb 25 2020 .bash_logout
-rw-r--r-- 1 u1001 u1001 3771 Feb 25 2020 .bashrc
-rw-r--r-- 1 u1001 u1001 807 Feb 25 2020 .profile
-rw-r--r-- 1 u1001 u1001 0 Oct 16 16:11 .sudo_as_admin_successful
-rw------- 1 u1001 u1001 1144 Oct 28 00:43 .viminfo
u1001@f2-vm:/$ touch /mnt/my-file
u1001@f2-vm:/$ setfacl -m u:1001:rwx /mnt/my-file
u1001@f2-vm:/$ sudo setcap -n 1001 cap_net_raw+ep /mnt/my-file
u1001@f2-vm:/$ ls -al /mnt/my-file
-rw-rwxr--+ 1 u1001 u1001 0 Oct 28 22:14 /mnt/my-file
u1001@f2-vm:/$ ls -al /home/ubuntu/my-file
-rw-rwxr--+ 1 ubuntu ubuntu 0 Oct 28 22:14 /home/ubuntu/my-file
u1001@f2-vm:/$ getfacl /mnt/my-file
getfacl: Removing leading '/' from absolute path names
# file: mnt/my-file
# owner: u1001
# group: u1001
user::rw-
user:u1001:rwx
group::rw-
mask::rwx
other::r--
u1001@f2-vm:/$ getfacl /home/ubuntu/my-file
getfacl: Removing leading '/' from absolute path names
# file: home/ubuntu/my-file
# owner: ubuntu
# group: ubuntu
user::rw-
user:ubuntu:rwx
group::rw-
mask::rwx
other::r--"
* tag 'idmapped-mounts-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux: (41 commits)
xfs: remove the possibly unused mp variable in xfs_file_compat_ioctl
xfs: support idmapped mounts
ext4: support idmapped mounts
fat: handle idmapped mounts
tests: add mount_setattr() selftests
fs: introduce MOUNT_ATTR_IDMAP
fs: add mount_setattr()
fs: add attr_flags_to_mnt_flags helper
fs: split out functions to hold writers
namespace: only take read lock in do_reconfigure_mnt()
mount: make {lock,unlock}_mount_hash() static
namespace: take lock_mount_hash() directly when changing flags
nfs: do not export idmapped mounts
overlayfs: do not mount on top of idmapped mounts
ecryptfs: do not mount on top of idmapped mounts
ima: handle idmapped mounts
apparmor: handle idmapped mounts
fs: make helpers idmap mount aware
exec: handle idmapped mounts
would_dump: handle idmapped mounts
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux
Pull module updates from Jessica Yu:
- Retire EXPORT_UNUSED_SYMBOL() and EXPORT_SYMBOL_GPL_FUTURE(). These
export types were introduced between 2006 - 2008. All the of the
unused symbols have been long removed and gpl future symbols were
converted to gpl quite a long time ago, and I don't believe these
export types have been used ever since. So, I think it should be safe
to retire those export types now (Christoph Hellwig)
- Refactor and clean up some aged code cruft in the module loader
(Christoph Hellwig)
- Build {,module_}kallsyms_on_each_symbol only when livepatching is
enabled, as it is the only caller (Christoph Hellwig)
- Unexport find_module() and module_mutex and fix the last module
callers to not rely on these anymore. Make module_mutex internal to
the module loader (Christoph Hellwig)
- Harden ELF checks on module load and validate ELF structures before
checking the module signature (Frank van der Linden)
- Fix undefined symbol warning for clang (Fangrui Song)
- Fix smatch warning (Dan Carpenter)
* tag 'modules-for-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux:
module: potential uninitialized return in module_kallsyms_on_each_symbol()
module: remove EXPORT_UNUSED_SYMBOL*
module: remove EXPORT_SYMBOL_GPL_FUTURE
module: move struct symsearch to module.c
module: pass struct find_symbol_args to find_symbol
module: merge each_symbol_section into find_symbol
module: remove each_symbol_in_section
module: mark module_mutex static
kallsyms: only build {,module_}kallsyms_on_each_symbol when required
kallsyms: refactor {,module_}kallsyms_on_each_symbol
module: use RCU to synchronize find_module
module: unexport find_module and module_mutex
drm: remove drm_fb_helper_modinit
powerpc/powernv: remove get_cxl_module
module: harden ELF info handling
module: Ignore _GLOBAL_OFFSET_TABLE_ when warning for undefined symbols
|
|
The linux-mips mailing list now lives at kernel.org. Update all references
in the kernel tree.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Reviewed-by: Huacai Chen <chenhuacai@kernel.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
device_initcall() is too late for bcm63xx.
We need to call of_clk_init() earlier in order to properly boot.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
PF_IO_WORKER are kernel threads too, but they aren't PF_KTHREAD in the
sense that we don't assign ->set_child_tid with our own structure. Just
ensure that every arch sets up the PF_IO_WORKER threads like kthreads
in the arch implementation of copy_thread().
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The 'syscall' variables are not directly used in the commands.
Remove the $(srctree)/ prefix because we can rely on VPATH.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
The rules in these Makefiles cannot detect the command line change
because the prerequisite 'FORCE' is missing.
Adding 'FORCE' will result in the headers being rebuilt every time
because the 'targets' additions are also wrong; the file paths in
'targets' must be relative to the current Makefile.
Fix all of them so the if_changed rules work correctly.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
|
|
Pull KVM updates from Paolo Bonzini:
"x86:
- Support for userspace to emulate Xen hypercalls
- Raise the maximum number of user memslots
- Scalability improvements for the new MMU.
Instead of the complex "fast page fault" logic that is used in
mmu.c, tdp_mmu.c uses an rwlock so that page faults are concurrent,
but the code that can run against page faults is limited. Right now
only page faults take the lock for reading; in the future this will
be extended to some cases of page table destruction. I hope to
switch the default MMU around 5.12-rc3 (some testing was delayed
due to Chinese New Year).
- Cleanups for MAXPHYADDR checks
- Use static calls for vendor-specific callbacks
- On AMD, use VMLOAD/VMSAVE to save and restore host state
- Stop using deprecated jump label APIs
- Workaround for AMD erratum that made nested virtualization
unreliable
- Support for LBR emulation in the guest
- Support for communicating bus lock vmexits to userspace
- Add support for SEV attestation command
- Miscellaneous cleanups
PPC:
- Support for second data watchpoint on POWER10
- Remove some complex workarounds for buggy early versions of POWER9
- Guest entry/exit fixes
ARM64:
- Make the nVHE EL2 object relocatable
- Cleanups for concurrent translation faults hitting the same page
- Support for the standard TRNG hypervisor call
- A bunch of small PMU/Debug fixes
- Simplification of the early init hypercall handling
Non-KVM changes (with acks):
- Detection of contended rwlocks (implemented only for qrwlocks,
because KVM only needs it for x86)
- Allow __DISABLE_EXPORTS from assembly code
- Provide a saner follow_pfn replacements for modules"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (192 commits)
KVM: x86/xen: Explicitly pad struct compat_vcpu_info to 64 bytes
KVM: selftests: Don't bother mapping GVA for Xen shinfo test
KVM: selftests: Fix hex vs. decimal snafu in Xen test
KVM: selftests: Fix size of memslots created by Xen tests
KVM: selftests: Ignore recently added Xen tests' build output
KVM: selftests: Add missing header file needed by xAPIC IPI tests
KVM: selftests: Add operand to vmsave/vmload/vmrun in svm.c
KVM: SVM: Make symbol 'svm_gp_erratum_intercept' static
locking/arch: Move qrwlock.h include after qspinlock.h
KVM: PPC: Book3S HV: Fix host radix SLB optimisation with hash guests
KVM: PPC: Book3S HV: Ensure radix guest has no SLB entries
KVM: PPC: Don't always report hash MMU capability for P9 < DD2.2
KVM: PPC: Book3S HV: Save and restore FSCR in the P9 path
KVM: PPC: remove unneeded semicolon
KVM: PPC: Book3S HV: Use POWER9 SLBIA IH=6 variant to clear SLB
KVM: PPC: Book3S HV: No need to clear radix host SLB before loading HPT guest
KVM: PPC: Book3S HV: Fix radix guest SLB side channel
KVM: PPC: Book3S HV: Remove support for running HPT guest on RPT host without mixed mode support
KVM: PPC: Book3S HV: Introduce new capability for 2nd DAWR
KVM: PPC: Book3S HV: Add infrastructure to support 2nd DAWR
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS updates from Thomas Bogendoerfer:
- added support for Nintendo N64
- added support for Realtek RTL83XX SoCs
- kaslr support for Loongson64
- first steps to get rid of set_fs()
- DMA runtime coherent/non-coherent selection cleanup
- cleanups and fixes
* tag 'mips_5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (98 commits)
Revert "MIPS: Add basic support for ptrace single step"
vmlinux.lds.h: catch more UBSAN symbols into .data
MIPS: kernel: Drop kgdb_call_nmi_hook
MAINTAINERS: Add git tree for KVM/mips
MIPS: Use common way to parse elfcorehdr
MIPS: Simplify EVA cache handling
Revert "MIPS: kernel: {ftrace,kgdb}: Set correct address limit for cache flushes"
MIPS: remove CONFIG_DMA_PERDEV_COHERENT
MIPS: remove CONFIG_DMA_MAYBE_COHERENT
driver core: lift dma_default_coherent into common code
MIPS: refactor the runtime coherent vs noncoherent DMA indicators
MIPS/alchemy: factor out the DMA coherent setup
MIPS/malta: simplify plat_setup_iocoherency
MIPS: Add basic support for ptrace single step
MAINTAINERS: replace non-matching patterns for loongson{2,3}
MIPS: Make check condition for SDBBP consistent with EJTAG spec
mips: Replace lkml.org links with lore
Revert "MIPS: microMIPS: Fix the judgment of mm_jr16_op and mm_jalr_op"
MIPS: crash_dump.c: Simplify copy_oldmem_page()
Revert "mips: Manually call fdt_init_reserved_mem() method"
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/linux
Pull oprofile and dcookies removal from Viresh Kumar:
"Remove oprofile and dcookies support
The 'oprofile' user-space tools don't use the kernel OPROFILE support
any more, and haven't in a long time. User-space has been converted to
the perf interfaces.
The dcookies stuff is only used by the oprofile code. Now that
oprofile's support is getting removed from the kernel, there is no
need for dcookies as well.
Remove kernel's old oprofile and dcookies support"
* tag 'oprofile-removal-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/linux:
fs: Remove dcookies support
drivers: Remove CONFIG_OPROFILE support
arch: xtensa: Remove CONFIG_OPROFILE support
arch: x86: Remove CONFIG_OPROFILE support
arch: sparc: Remove CONFIG_OPROFILE support
arch: sh: Remove CONFIG_OPROFILE support
arch: s390: Remove CONFIG_OPROFILE support
arch: powerpc: Remove oprofile
arch: powerpc: Stop building and using oprofile
arch: parisc: Remove CONFIG_OPROFILE support
arch: mips: Remove CONFIG_OPROFILE support
arch: microblaze: Remove CONFIG_OPROFILE support
arch: ia64: Remove rest of perfmon support
arch: ia64: Remove CONFIG_OPROFILE support
arch: hexagon: Don't select HAVE_OPROFILE
arch: arc: Remove CONFIG_OPROFILE support
arch: arm: Remove CONFIG_OPROFILE support
arch: alpha: Remove CONFIG_OPROFILE support
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull ELF compat updates from Al Viro:
"Sanitizing ELF compat support, especially for triarch architectures:
- X32 handling cleaned up
- MIPS64 uses compat_binfmt_elf.c both for O32 and N32 now
- Kconfig side of things regularized
Eventually I hope to have compat_binfmt_elf.c killed, with both native
and compat built from fs/binfmt_elf.c, with -DELF_BITS={64,32} passed
by kbuild, but that's a separate story - not included here"
* 'work.elf-compat' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
get rid of COMPAT_ELF_EXEC_PAGESIZE
compat_binfmt_elf: don't bother with undef of ELF_ARCH
Kconfig: regularize selection of CONFIG_BINFMT_ELF
mips compat: switch to compat_binfmt_elf.c
mips: don't bother with ELF_CORE_EFLAGS
mips compat: don't bother with ELF_ET_DYN_BASE
mips: KVM_GUEST makes no sense for 64bit builds...
mips: kill unused definitions in binfmt_elf[on]32.c
mips binfmt_elf*32.c: use elfcore-compat.h
x32: make X32, !IA32_EMULATION setups able to execute x32 binaries
[amd64] clean PRSTATUS_SIZE/SET_PR_FPVALID up properly
elf_prstatus: collect the common part (everything before pr_reg) into a struct
binfmt_elf: partially sanitize PRSTATUS_SIZE and SET_PR_FPVALID
|
|
This reverts commit 7c86ff9925cbc83e8a21f164a8fdc2767e03531e.
There are too many special cases for MIPS not covered by this patch.
In the end it might be better to implement single stepping in userland
than emulating it in the kernel.
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
With the removal of set_fs() calls kgdb_call_nmi_hook() is now the same as
the default implementation, so we can remove it.
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
"elfcorehdr" can be parsed at kernel/crash_dump.c
Signed-off-by: Jinyang He <hejinyang@loongson.cn>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
protected_cache_op is only used for flushing user addresses, so
we only need to define protected_cache_op different in EVA mode and
be done with it.
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
flushes"
This reverts commit 6ebda44f366478d1eea180d93154e7d97b591f50.
All icache flushes in this code paths are done via flush_icache_range(),
which only uses normal cache instruction. And this is the correct thing
for EVA mode, too. So no need to do set_fs(KERNEL_DS) here.
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
Just select DMA_NONCOHERENT and ARCH_HAS_SETUP_DMA_OPS from the
MIPS_GENERIC platform instead.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Huacai Chen <chenhuacai@kernel.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
CONFIG_DMA_MAYBE_COHERENT just guards two early init options now. Just
enable them unconditionally for CONFIG_DMA_NONCOHERENT.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Lift the dma_default_coherent variable from the mips architecture code
to the driver core. This allows an architecture to sdefault all device
to be DMA coherent at run time, even if the kernel is build with support
for DMA noncoherent device. By allowing device_initialize to set the
->dma_coherent field to this default the amount of arch hooks required
for this behavior can be greatly reduced.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Replace the global coherentio enum, and the hw_coherentio (fake) boolean
variables with a single boolean dma_default_coherent flag.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Factor out a alchemy_dma_coherent helper that determines if the platform
is DMA coherent. Also stop initializing the hw_coherentio variable, given
that is only ever set to a non-zero value by the malta setup code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Given that plat_mem_setup runs before earlyparams are handled and malta
selects CONFIG_DMA_MAYBE_COHERENT, coherentio can only be set to
IO_COHERENCE_DEFAULT at this point. So remove the checking for other
options and merge plat_enable_iocoherency into plat_setup_iocoherency
to simplify the code a bit.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
In the current code, arch_has_single_step() is not defined on MIPS,
that means MIPS does not support instruction single-step for user mode.
Delve is a debugger for the Go programming language, the ptrace syscall
PtraceSingleStep() failed [1] on MIPS and then the single step function
can not work well, we can see that PtraceSingleStep() definition returns
ptrace(PTRACE_SINGLESTEP) [2].
So it is necessary to support ptrace single step on MIPS.
At the beginning, we try to use the Debug Single Step exception on the
Loongson 3A4000 platform, but it has no effect when set CP0_DEBUG SSt
bit, this is because CP0_DEBUG NoSSt bit is 1 which indicates no
single-step feature available [3], so this way which is dependent on the
hardware is almost impossible.
With further research, we find out there exists a common way used with
break instruction in arch/alpha/kernel/ptrace.c, it is workable.
For the above analysis, define arch_has_single_step(), add the common
function user_enable_single_step() and user_disable_single_step(), set
flag TIF_SINGLESTEP for child process, use break instruction to set
breakpoint.
We can use the following testcase to test it:
tools/testing/selftests/breakpoints/step_after_suspend_test.c
$ make -C tools/testing/selftests TARGETS=breakpoints
$ cd tools/testing/selftests/breakpoints
Without this patch:
$ ./step_after_suspend_test -n
TAP version 13
1..4
# ptrace(PTRACE_SINGLESTEP) not supported on this architecture: Input/output error
ok 1 # SKIP CPU 0
# ptrace(PTRACE_SINGLESTEP) not supported on this architecture: Input/output error
ok 2 # SKIP CPU 1
# ptrace(PTRACE_SINGLESTEP) not supported on this architecture: Input/output error
ok 3 # SKIP CPU 2
# ptrace(PTRACE_SINGLESTEP) not supported on this architecture: Input/output error
ok 4 # SKIP CPU 3
# Totals: pass:0 fail:0 xfail:0 xpass:0 skip:4 error:0
With this patch:
$ ./step_after_suspend_test -n
TAP version 13
1..4
ok 1 CPU 0
ok 2 CPU 1
ok 3 CPU 2
ok 4 CPU 3
# Totals: pass:4 fail:0 xfail:0 xpass:0 skip:0 error:0
[1] https://github.com/go-delve/delve/blob/master/pkg/proc/native/threads_linux.go#L50
[2] https://github.com/go-delve/delve/blob/master/vendor/golang.org/x/sys/unix/syscall_linux.go#L1573
[3] http://www.t-es-t.hu/download/mips/md00047f.pdf
Reported-by: Guoqi Chen <chenguoqi@loongson.cn>
Signed-off-by: Xingxing Su <suxingxing@loongson.cn>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 updates for Linux 5.12
- Make the nVHE EL2 object relocatable, resulting in much more
maintainable code
- Handle concurrent translation faults hitting the same page
in a more elegant way
- Support for the standard TRNG hypervisor call
- A bunch of small PMU/Debug fixes
- Allow the disabling of symbol export from assembly code
- Simplification of the early init hypercall handling
|
|
Commit ccbef1674a15 ("Kbuild, lto: add ld-version and ld-ifversion
macros") introduced scripts/ld-version.sh for GCC LTO.
At that time, this script handled 5 version fields because GCC LTO
needed the downstream binutils. (https://lkml.org/lkml/2014/4/8/272)
The code snippet from the submitted patch was as follows:
# We need HJ Lu's Linux binutils because mainline binutils does not
# support mixing assembler and LTO code in the same ld -r object.
# XXX check if the gcc plugin ld is the expected one too
# XXX some Fedora binutils should also support it. How to check for that?
ifeq ($(call ld-ifversion,-ge,22710001,y),y)
...
However, GCC LTO was not merged into the mainline after all.
(https://lkml.org/lkml/2014/4/8/272)
So, the 4th and 5th fields were never used, and finally removed by
commit 0d61ed17dd30 ("ld-version: Drop the 4th and 5th version
components").
Since then, the last 4-digits returned by this script is always zeros.
Remove the meaningless last 4-digits. This makes the version format
consistent with GCC_VERSION, CLANG_VERSION, LLD_VERSION.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
include/asm-generic/qrwlock.h was trying to get arch_spin_is_locked via
asm-generic/qspinlock.h. However, this does not work because architectures
might be using queued rwlocks but not queued spinlocks (csky), or because they
might be defining their own queued_* macros before including asm/qspinlock.h.
To fix this, ensure that asm/spinlock.h always includes qrwlock.h after
defining arch_spin_is_locked (either directly for csky, or via
asm/qspinlock.h for other architectures). The only inclusion elsewhere
is in kernel/locking/qrwlock.c. That one is really unnecessary because
the file is only compiled in SMP configurations (config QUEUED_RWLOCKS
depends on SMP) and in that case linux/spinlock.h already includes
asm/qrwlock.h if needed, via asm/spinlock.h.
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Waiman Long <longman@redhat.com>
Fixes: 26128cb6c7e6 ("locking/rwlocks: Add contention detection for rwlocks")
Tested-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Ben Gardon <bgardon@google.com>
[Add arch/sparc and kernel/locking parts per discussion with Waiman. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
According to MIPS EJTAG Specification [1], a Debug Breakpoint
exception occurs when an SDBBP instruction is executed, the
CP0_DEBUG bit DBp indicates that a Debug Breakpoint exception
occurred.
When I read the original code, it looks a little confusing
at first glance, just check bit DBp for SDBBP to make the
code more readable, it will be much easier to understand.
[1] http://www.t-es-t.hu/download/mips/md00047f.pdf
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
As started by commit 05a5f51ca566 ("Documentation: Replace lkml.org
links with lore"), replace lkml.org links with lore to better use a
single source that's more likely to stay available long-term.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
This reverts commit 9308579fef3ddde19da9d45e23bf36d41932417f.
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Current KVM_USER_MEM_SLOTS limits are arch specific (512 on Power, 509 on x86,
32 on s390, 16 on MIPS) but they don't really need to be. Memory slots are
allocated dynamically in KVM when added so the only real limitation is
'id_to_index' array which is 'short'. We don't have any other
KVM_MEM_SLOTS_NUM/KVM_USER_MEM_SLOTS-sized statically defined structures.
Low KVM_USER_MEM_SLOTS can be a limiting factor for some configurations.
In particular, when QEMU tries to start a Windows guest with Hyper-V SynIC
enabled and e.g. 256 vCPUs the limit is hit as SynIC requires two pages per
vCPU and the guest is free to pick any GFN for each of them, this fragments
memslots as QEMU wants to have a separate memslot for each of these pages
(which are supposed to act as 'overlay' pages).
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20210127175731.2020089-3-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Replace kmap_atomic_pfn() with kmap_local_pfn() which is preemptible and
can take page faults.
Remove the indirection of the dump page and the related cruft which is not
longer required.
Remove unused or redundant header files.
Signed-off-by: Youling Tang <tangyouling@loongson.cn>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
This reverts commit 3751cbda8f223549d7ea28803cbec8ac87e43ed2.
Originally the patch was created to fix the reserved-memory DT-node
parsing failure on the early stages of the platform memory initialization.
That happened due to the two early memory allocators utilization that
time: bootmem and memblock. At first the platform-specific memory mapping
array was initialized. Then the early_init_fdt_scan_reserved_mem() was
called, which couldn't fully parse the "reserved-memory" DT-node since
neither memblock nor bootmem allocators hadn't been initialized at that
stage, so the fdt_init_reserved_mem() method failed on the memory
allocation calls. Only after that the platform-specific memory mapping
were used to create proper bootmem and memblock structures and let the
early memory allocations work. That's why we had to call the
fdt_init_reserved_mem() method one more time to retry the initialization
of the features like CMA.
The necessity to have that fix was disappeared after the full memblock
support had been added to the MIPS kernel and all plat_mem_setup() had
been fixed to add the memory regions right into the memblock memory pool.
Let's revert that patch then especially after having Paul reported that
the second fdt_init_reserved_mem() call causes the reserved memory pool
being created twice bigger than implied.
Fixes: a94e4f24ec83 ("MIPS: init: Drop boot_mem_map")
Reported-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
unwind_stack_by_address and unwind_stack need <asm/stacktrace.h>.
arch_align_stack needs <asm/exec.h>
link: https://lists.01.org/hyperkitty/list/kbuild-all@lists.01.org/thread/ZPL2RRA6RZKRQZI5IGOVLFXN2GVZBN3L/
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Jinyang He <hejinyang@loongson.cn>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Commit 1e35918ad9d1 ("MIPS: Enable Undefined Behavior Sanitizer
UBSAN") added a possibility to build the entire kernel with UBSAN
instrumentation for MIPS, with the exception for VDSO.
However, self-extracting head wasn't been added to exceptions, so
this occurs:
mips-alpine-linux-musl-ld: arch/mips/boot/compressed/decompress.o:
in function `FSE_buildDTable_wksp':
decompress.c:(.text.FSE_buildDTable_wksp+0x278): undefined reference
to `__ubsan_handle_shift_out_of_bounds'
mips-alpine-linux-musl-ld: decompress.c:(.text.FSE_buildDTable_wksp+0x2a8):
undefined reference to `__ubsan_handle_shift_out_of_bounds'
mips-alpine-linux-musl-ld: decompress.c:(.text.FSE_buildDTable_wksp+0x2c4):
undefined reference to `__ubsan_handle_shift_out_of_bounds'
mips-alpine-linux-musl-ld: arch/mips/boot/compressed/decompress.o:
decompress.c:(.text.FSE_buildDTable_raw+0x9c): more undefined references
to `__ubsan_handle_shift_out_of_bounds' follow
Add UBSAN_SANITIZE := n to mips/boot/compressed/Makefile to exclude
it from instrumentation scope and fix this issue.
Fixes: 1e35918ad9d1 ("MIPS: Enable Undefined Behavior Sanitizer UBSAN")
Cc: stable@vger.kernel.org # 5.0+
Signed-off-by: Alexander Lobakin <alobakin@pm.me>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
The type of the VMLINUX_LOAD_ADDRESS macro is the (unsigned long long)
in 32bits kernel but (unsigned long) in the 64-bit kernel. Although there
is no error here, avoid using it to calculate kaslr_offset.
Signed-off-by: Jinyang He <hejinyang@loongson.cn>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Provide kaslr_offset() to get the kernel offset when KASLR is enabled.
Error may occur before update_kaslr_offset(), so put it at the end of
the offset branch.
Fixes: a307a4ce9ecd ("MIPS: Loongson64: Add KASLR support")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Jinyang He <hejinyang@loongson.cn>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
EXPORT_UNUSED_SYMBOL* is not actually used anywhere. Remove the
unused functionality as we generally just remove unused code anyway.
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
|
|
Add perf_event_mips_regs/perf_reg_value/perf_reg_validate to support
features HAVE_PERF_REGS/HAVE_PERF_USER_STACK_DUMP in kernel.
[ayan@wavecomp.com: Repick this patch for unwinding userstack backtrace
by perf and libunwind on MIPS based CPU.]
[ralf@linux-mips.org: Add perf_get_regs_user() which is required after
'commit 88a7c26af8da ("perf: Move task_pt_regs sampling into arch code")'.]
[yangtiezhu@loongson.cn: Fix build error about perf_get_regs_user() after
commit 76a4efa80900 ("perf/arch: Remove perf_sample_data::regs_user_copy"),
and also separate the original patches into two parts (MIPS kernel and perf
tools) to merge easily.]
The original patches:
https://lore.kernel.org/patchwork/patch/1126521/
https://lore.kernel.org/patchwork/patch/1126520/
Signed-off-by: David Daney <david.daney@cavium.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Archer Yan <ayan@wavecomp.com>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Since commit 02bd530f888c ("MIPS: generic: Increase NR_IRQS to 256")
include/asm/mach-pistachio/irq.h just does nothing.
Remove the file along with mach-pistachio folder and include compiler
directive.
Signed-off-by: Alexander Lobakin <alobakin@pm.me>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Signed-off-by: Bert Vermeulen <bert@biot.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|