summaryrefslogtreecommitdiffstats
path: root/arch/mips
AgeCommit message (Collapse)AuthorFilesLines
2019-05-19Merge tag 'kbuild-v5.2-2' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull more Kbuild updates from Masahiro Yamada: - remove unneeded use of cc-option, cc-disable-warning, cc-ldoption - exclude tracked files from .gitignore - re-enable -Wint-in-bool-context warning - refactor samples/Makefile - stop building immediately if syncconfig fails - do not sprinkle error messages when $(CC) does not exist - move arch/alpha/defconfig to the configs subdirectory - remove crappy header search path manipulation - add comment lines to .config to clarify the end of menu blocks - check uniqueness of module names (adding new warnings intentionally) * tag 'kbuild-v5.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (24 commits) kconfig: use 'else ifneq' for Makefile to improve readability kbuild: check uniqueness of module names kconfig: Terminate menu blocks with a comment in the generated config kbuild: add LICENSES to KBUILD_ALLDIRS kbuild: remove 'addtree' and 'flags' magic for header search paths treewide: prefix header search paths with $(srctree)/ media: prefix header search paths with $(srctree)/ media: remove unneeded header search paths alpha: move arch/alpha/defconfig to arch/alpha/configs/defconfig kbuild: terminate Kconfig when $(CC) or $(LD) is missing kbuild: turn auto.conf.cmd into a mandatory include file .gitignore: exclude .get_maintainer.ignore and .gitattributes kbuild: add all Clang-specific flags unconditionally kbuild: Don't try to add '-fcatch-undefined-behavior' flag kbuild: add some extra warning flags unconditionally kbuild: add -Wvla flag unconditionally arch: remove dangling asm-generic wrappers samples: guard sub-directories with CONFIG options kbuild: re-enable int-in-bool-context warning MAINTAINERS: kbuild: Add pattern for scripts/*vmlinux* ...
2019-05-19Merge tag 'mips_5.2_2' of ↵Linus Torvalds17-659/+809
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux Pull a few more MIPS updates from Paul Burton: "Some SGI IP27 specific PCI rework and a batch of fixes: - A build fix for BMIPS5000 configurations with CONFIG_HW_PERF_EVENTS=y, which also neatly removes some #ifdefery. - A fix to report supported ISAs correctly on older Ingenic SoCs which incorrectly indicate MIPSr2 support in their cop0 Config register. - Some PCI modernization for SGI IP27 systems as part of ongoing work to support some other SGI systems. - A fix allowing use of appended DTB files with generic kernels. - DMA mask fixes for SGI IP22 & Alchemy systems" * tag 'mips_5.2_2' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: MIPS: Alchemy: add DMA masks for on-chip ethernet MIPS: SGI-IP22: provide missing dma_mask/coherent_dma_mask generic: fix appended dtb support MIPS: SGI-IP27: abstract chipset irq from bridge MIPS: SGI-IP27: use generic PCI driver MIPS: Fix Ingenic SoCs sometimes reporting wrong ISA MIPS: perf: Fix build with CONFIG_CPU_BMIPS5000 enabled
2019-05-18treewide: prefix header search paths with $(srctree)/Masahiro Yamada1-1/+1
Currently, the Kbuild core manipulates header search paths in a crazy way [1]. To fix this mess, I want all Makefiles to add explicit $(srctree)/ to the search paths in the srctree. Some Makefiles are already written in that way, but not all. The goal of this work is to make the notation consistent, and finally get rid of the gross hacks. Having whitespaces after -I does not matter since commit 48f6e3cf5bc6 ("kbuild: do not drop -I without parameter"). [1]: https://patchwork.kernel.org/patch/9632347/ Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-05-17Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds3-0/+18
Pull more vfs mount updates from Al Viro: "Propagation of new syscalls to other architectures + cosmetic change from Christian (fscontext didn't follow the convention for anon inode names)" * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: uapi: Wire up the mount API syscalls on non-x86 arches [ver #2] uapi, x86: Fix the syscall numbering of the mount API syscalls [ver #2] uapi, fsopen: use square brackets around "fscontext" [ver #2]
2019-05-16Merge tag 'clk-for-linus' of ↵Linus Torvalds3-0/+3
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull more clk framework updates from Stephen Boyd: "One more patch to remove io.h from clk-provider.h. We used to need this include when we had clk_readl() and clk_writel(), but those are gone now so this patch pushes the dependency out to the users of clk-provider.h" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: clk: Remove io.h from clk-provider.h
2019-05-16Merge branch 'next' of ↵Linus Torvalds2-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux Pull thermal management updates from Zhang Rui: - Remove the 'module' Kconfig option for thermal subsystem framework because the thermal framework are required to be ready as early as possible to avoid overheat at boot time (Daniel Lezcano) - Fix a bug that thermal framework pokes disabled thermal zones upon resume (Wei Wang) - A couple of cleanups and trivial fixes on int340x thermal drivers (Srinivas Pandruvada, Zhang Rui, Sumeet Pawnikar) * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: drivers: thermal: processor_thermal: Downgrade error message mlxsw: Remove obsolete dependency on THERMAL=m hwmon/drivers/core: Simplify complex dependency thermal/drivers/core: Fix typo in the option name thermal/drivers/core: Remove depends on THERMAL in Kconfig thermal/drivers/core: Remove module unload code thermal/drivers/core: Remove the module Kconfig's option thermal: core: skip update disabled thermal zones after suspend thermal: make device_register's type argument const thermal: intel: int340x: processor_thermal_device: simplify to get driver data thermal/int3403_thermal: favor _TMP instead of PTYP
2019-05-16Merge tag 'asm-generic-nommu' of ↵Linus Torvalds1-1/+0
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic Pull nommu generic uaccess updates from Arnd Bergmann: "asm-generic: kill <asm/segment.h> and improve nommu generic uaccess helpers Christoph Hellwig writes: This is a series doing two somewhat interwinded things. It improves the asm-generic nommu uaccess helper to optionally be entirely generic and not require any arch helpers for the actual uaccess. For the generic uaccess.h to actually be generically useful I also had to kill off the mess we made of <asm/segment.h>, which really shouldn't exist on most architectures" * tag 'asm-generic-nommu' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: asm-generic: optimize generic uaccess for 8-byte loads and stores asm-generic: provide entirely generic nommu uaccess arch: mostly remove <asm/segment.h> asm-generic: don't include <asm/segment.h> from <asm/uaccess.h>
2019-05-16uapi: Wire up the mount API syscalls on non-x86 arches [ver #2]David Howells3-0/+18
Wire up the mount API syscalls on non-x86 arches. Reported-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2019-05-15MIPS: Alchemy: add DMA masks for on-chip ethernetManuel Lauss1-8/+14
Makes au1000-eth work again, tested on DB1500. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Signed-off-by: Paul Burton <paul.burton@mips.com> Cc: Linux-MIPS <linux-mips@linux-mips.org>
2019-05-15clk: Remove io.h from clk-provider.hStephen Boyd3-0/+3
Now that we've gotten rid of clk_readl() we can remove io.h from the clk-provider header and push out the io.h include to any code that isn't already including the io.h header but using things like readl/writel, etc. Found with this grep: git grep -l clk-provider.h | grep '.c$' | xargs git grep -L 'linux/io.h' | \ xargs git grep -l \ -e '\<__iowrite32_copy\>' --or \ -e '\<__ioread32_copy\>' --or \ -e '\<__iowrite64_copy\>' --or \ -e '\<ioremap_page_range\>' --or \ -e '\<ioremap_huge_init\>' --or \ -e '\<arch_ioremap_pud_supported\>' --or \ -e '\<arch_ioremap_pmd_supported\>' --or \ -e '\<devm_ioport_map\>' --or \ -e '\<devm_ioport_unmap\>' --or \ -e '\<IOMEM_ERR_PTR\>' --or \ -e '\<devm_ioremap\>' --or \ -e '\<devm_ioremap_nocache\>' --or \ -e '\<devm_ioremap_wc\>' --or \ -e '\<devm_iounmap\>' --or \ -e '\<devm_ioremap_release\>' --or \ -e '\<devm_memremap\>' --or \ -e '\<devm_memunmap\>' --or \ -e '\<__devm_memremap_pages\>' --or \ -e '\<pci_remap_cfgspace\>' --or \ -e '\<arch_has_dev_port\>' --or \ -e '\<arch_phys_wc_add\>' --or \ -e '\<arch_phys_wc_del\>' --or \ -e '\<memremap\>' --or \ -e '\<memunmap\>' --or \ -e '\<arch_io_reserve_memtype_wc\>' --or \ -e '\<arch_io_free_memtype_wc\>' --or \ -e '\<__io_aw\>' --or \ -e '\<__io_pbw\>' --or \ -e '\<__io_paw\>' --or \ -e '\<__io_pbr\>' --or \ -e '\<__io_par\>' --or \ -e '\<__raw_readb\>' --or \ -e '\<__raw_readw\>' --or \ -e '\<__raw_readl\>' --or \ -e '\<__raw_readq\>' --or \ -e '\<__raw_writeb\>' --or \ -e '\<__raw_writew\>' --or \ -e '\<__raw_writel\>' --or \ -e '\<__raw_writeq\>' --or \ -e '\<readb\>' --or \ -e '\<readw\>' --or \ -e '\<readl\>' --or \ -e '\<readq\>' --or \ -e '\<writeb\>' --or \ -e '\<writew\>' --or \ -e '\<writel\>' --or \ -e '\<writeq\>' --or \ -e '\<readb_relaxed\>' --or \ -e '\<readw_relaxed\>' --or \ -e '\<readl_relaxed\>' --or \ -e '\<readq_relaxed\>' --or \ -e '\<writeb_relaxed\>' --or \ -e '\<writew_relaxed\>' --or \ -e '\<writel_relaxed\>' --or \ -e '\<writeq_relaxed\>' --or \ -e '\<readsb\>' --or \ -e '\<readsw\>' --or \ -e '\<readsl\>' --or \ -e '\<readsq\>' --or \ -e '\<writesb\>' --or \ -e '\<writesw\>' --or \ -e '\<writesl\>' --or \ -e '\<writesq\>' --or \ -e '\<inb\>' --or \ -e '\<inw\>' --or \ -e '\<inl\>' --or \ -e '\<outb\>' --or \ -e '\<outw\>' --or \ -e '\<outl\>' --or \ -e '\<inb_p\>' --or \ -e '\<inw_p\>' --or \ -e '\<inl_p\>' --or \ -e '\<outb_p\>' --or \ -e '\<outw_p\>' --or \ -e '\<outl_p\>' --or \ -e '\<insb\>' --or \ -e '\<insw\>' --or \ -e '\<insl\>' --or \ -e '\<outsb\>' --or \ -e '\<outsw\>' --or \ -e '\<outsl\>' --or \ -e '\<insb_p\>' --or \ -e '\<insw_p\>' --or \ -e '\<insl_p\>' --or \ -e '\<outsb_p\>' --or \ -e '\<outsw_p\>' --or \ -e '\<outsl_p\>' --or \ -e '\<ioread8\>' --or \ -e '\<ioread16\>' --or \ -e '\<ioread32\>' --or \ -e '\<ioread64\>' --or \ -e '\<iowrite8\>' --or \ -e '\<iowrite16\>' --or \ -e '\<iowrite32\>' --or \ -e '\<iowrite64\>' --or \ -e '\<ioread16be\>' --or \ -e '\<ioread32be\>' --or \ -e '\<ioread64be\>' --or \ -e '\<iowrite16be\>' --or \ -e '\<iowrite32be\>' --or \ -e '\<iowrite64be\>' --or \ -e '\<ioread8_rep\>' --or \ -e '\<ioread16_rep\>' --or \ -e '\<ioread32_rep\>' --or \ -e '\<ioread64_rep\>' --or \ -e '\<iowrite8_rep\>' --or \ -e '\<iowrite16_rep\>' --or \ -e '\<iowrite32_rep\>' --or \ -e '\<iowrite64_rep\>' --or \ -e '\<__io_virt\>' --or \ -e '\<pci_iounmap\>' --or \ -e '\<virt_to_phys\>' --or \ -e '\<phys_to_virt\>' --or \ -e '\<ioremap_uc\>' --or \ -e '\<ioremap\>' --or \ -e '\<__ioremap\>' --or \ -e '\<iounmap\>' --or \ -e '\<ioremap\>' --or \ -e '\<ioremap_nocache\>' --or \ -e '\<ioremap_uc\>' --or \ -e '\<ioremap_wc\>' --or \ -e '\<ioremap_wc\>' --or \ -e '\<ioremap_wt\>' --or \ -e '\<ioport_map\>' --or \ -e '\<ioport_unmap\>' --or \ -e '\<ioport_map\>' --or \ -e '\<ioport_unmap\>' --or \ -e '\<xlate_dev_kmem_ptr\>' --or \ -e '\<xlate_dev_mem_ptr\>' --or \ -e '\<unxlate_dev_mem_ptr\>' --or \ -e '\<virt_to_bus\>' --or \ -e '\<bus_to_virt\>' --or \ -e '\<memset_io\>' --or \ -e '\<memcpy_fromio\>' --or \ -e '\<memcpy_toio\>' I also reordered a couple includes when they weren't alphabetical and removed clk.h from kona, replacing it with clk-provider.h because that driver doesn't use clk consumer APIs. Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Chen-Yu Tsai <wens@csie.org> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Acked-by: Tero Kristo <t-kristo@ti.com> Acked-by: Sekhar Nori <nsekhar@ti.com> Cc: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Mark Brown <broonie@kernel.org> Cc: Chris Zankel <chris@zankel.net> Acked-by: Max Filippov <jcmvbkbc@gmail.com> Acked-by: John Crispin <john@phrozen.org> Acked-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-05-14MIPS: mark __fls() and __ffs() as __always_inlineMasahiro Yamada1-2/+2
This prepares to move CONFIG_OPTIMIZE_INLINING from x86 to a common place. We need to eliminate potential issues beforehand. If it is enabled for mips, the following errors are reported: arch/mips/mm/sc-mips.o: In function `mips_sc_prefetch_enable.part.2': sc-mips.c:(.text+0x98): undefined reference to `mips_gcr_base' sc-mips.c:(.text+0x9c): undefined reference to `mips_gcr_base' sc-mips.c:(.text+0xbc): undefined reference to `mips_gcr_base' sc-mips.c:(.text+0xc8): undefined reference to `mips_gcr_base' sc-mips.c:(.text+0xdc): undefined reference to `mips_gcr_base' arch/mips/mm/sc-mips.o:sc-mips.c:(.text.unlikely+0x44): more undefined references to `mips_gcr_base' Link: http://lkml.kernel.org/r/20190423034959.13525-7-yamada.masahiro@socionext.com Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Boris Brezillon <bbrezillon@kernel.org> Cc: Borislav Petkov <bp@suse.de> Cc: Brian Norris <computersforpeace@gmail.com> Cc: Christophe Leroy <christophe.leroy@c-s.fr> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Marek Vasut <marek.vasut@gmail.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Malaterre <malat@debian.org> Cc: Miquel Raynal <miquel.raynal@bootlin.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Richard Weinberger <richard@nod.at> Cc: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Stefan Agner <stefan@agner.ch> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-05-14MIPS: mark mult_sh_align_mod() as __always_inlineMasahiro Yamada1-2/+2
This prepares to move CONFIG_OPTIMIZE_INLINING from x86 to a common place. We need to eliminate potential issues beforehand. If it is enabled for mips, the following error is reported: arch/mips/kernel/cpu-bugs64.c: In function 'mult_sh_align_mod.constprop': arch/mips/kernel/cpu-bugs64.c:33:2: error: asm operand 1 probably doesn't match constraints [-Werror] asm volatile( ^~~ arch/mips/kernel/cpu-bugs64.c:33:2: error: asm operand 1 probably doesn't match constraints [-Werror] asm volatile( ^~~ arch/mips/kernel/cpu-bugs64.c:33:2: error: impossible constraint in 'asm' asm volatile( ^~~ arch/mips/kernel/cpu-bugs64.c:33:2: error: impossible constraint in 'asm' asm volatile( ^~~ Link: http://lkml.kernel.org/r/20190423034959.13525-4-yamada.masahiro@socionext.com Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Boris Brezillon <bbrezillon@kernel.org> Cc: Borislav Petkov <bp@suse.de> Cc: Brian Norris <computersforpeace@gmail.com> Cc: Christophe Leroy <christophe.leroy@c-s.fr> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Marek Vasut <marek.vasut@gmail.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Malaterre <malat@debian.org> Cc: Miquel Raynal <miquel.raynal@bootlin.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Richard Weinberger <richard@nod.at> Cc: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Stefan Agner <stefan@agner.ch> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-05-14mm: memblock: make keeping memblock memory opt-in rather than opt-outMike Rapoport1-1/+0
Most architectures do not need the memblock memory after the page allocator is initialized, but only few enable ARCH_DISCARD_MEMBLOCK in the arch Kconfig. Replacing ARCH_DISCARD_MEMBLOCK with ARCH_KEEP_MEMBLOCK and inverting the logic makes it clear which architectures actually use memblock after system initialization and skips the necessity to add ARCH_DISCARD_MEMBLOCK to the architectures that are still missing that option. Link: http://lkml.kernel.org/r/1556102150-32517-1-git-send-email-rppt@linux.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc) Cc: Russell King <linux@armlinux.org.uk> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Tony Luck <tony.luck@intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paul Burton <paul.burton@mips.com> Cc: James Hogan <jhogan@kernel.org> Cc: Ley Foon Tan <lftan@altera.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Rich Felker <dalias@libc.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Eric Biederman <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-05-14initramfs: poison freed initrd memoryChristoph Hellwig1-8/+0
Various architectures including x86 poison the freed initrd memory. Do the same in the generic free_initrd_mem implementation and switch a few more architectures that are identical to the generic code over to it now. Link: http://lkml.kernel.org/r/20190213174621.29297-9-hch@lst.de Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Mike Rapoport <rppt@linux.ibm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> [arm64] Cc: Geert Uytterhoeven <geert@linux-m68k.org> [m68k] Cc: Steven Price <steven.price@arm.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Russell King <linux@armlinux.org.uk> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-05-14mm/gup: change GUP fast to use flags rather than a write 'bool'Ira Weiny1-5/+6
To facilitate additional options to get_user_pages_fast() change the singular write parameter to be gup_flags. This patch does not change any functionality. New functionality will follow in subsequent patches. Some of the get_user_pages_fast() call sites were unchanged because they already passed FOLL_WRITE or 0 for the write parameter. NOTE: It was suggested to change the ordering of the get_user_pages_fast() arguments to ensure that callers were converted. This breaks the current GUP call site convention of having the returned pages be the final parameter. So the suggestion was rejected. Link: http://lkml.kernel.org/r/20190328084422.29911-4-ira.weiny@intel.com Link: http://lkml.kernel.org/r/20190317183438.2057-4-ira.weiny@intel.com Signed-off-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Mike Marshall <hubcap@omnibond.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Dan Williams <dan.j.williams@intel.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Hogan <jhogan@kernel.org> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: John Hubbard <jhubbard@nvidia.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Rich Felker <dalias@libc.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-05-13MIPS: SGI-IP22: provide missing dma_mask/coherent_dma_maskThomas Bogendoerfer1-0/+13
Set dma_masks for SGIWD93 and SGISEEQ otherwise DMA allocations fails and causes not working SCSI/ethernet. Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de> Signed-off-by: Paul Burton <paul.burton@mips.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: James Hogan <jhogan@kernel.org> Cc: linux-mips@vger.kernel.org Cc: linux-kernel@vger.kernel.org
2019-05-13generic: fix appended dtb supportMarcin Nowakowski1-2/+2
Appended DTB support is mostly intended to be used on legacy systems, but it is a valid feature that can be enabled for generic platform, which currently doesn't support it - if selected, the appended DTB will be ignored by the platform startup code. During kernel startup, the appended DTB's location is stored in fw_passed_dtb if the init code finds what appears to be a valid DTB. Otherwise (if a0 == -2), a1 is stored in fw_passed_dtb, so either way it will always point to either a user-passed DTB or built-in DTB. Signed-off-by: Marcin Nowakowski <marcin.nowakowski@fungible.com> Signed-off-by: Paul Burton <paul.burton@mips.com> Cc: linux-mips@vger.kernel.org
2019-05-12Merge tag 'mtd/for-5.2' of ↵Linus Torvalds11-14/+14
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mtd/linux Pull MTD updates from Richard Weinberger: "MTD core changes: - New AFS partition parser - Update MAINTAINERS entry - Use of fall-throughs markers NAND core changes: - Support having the bad block markers in either the first, second or last page of a block. The combination of all three location is now possible. - Constification of NAND_OP_PARSER(_PATTERN) elements. - Generic NAND DT bindings changed to yaml format (can be used to check the proposed bindings. First platform to be fully supported: sunxi. - Stopped using several legacy hooks. - Preparation to use the generic NAND layer with the addition of several helpers and the removal of the struct nand_chip from generic functions. - Kconfig cleanup to prepare the introduction of external ECC engines support. - Fallthrough comments. - Introduction of the SPI-mem dirmap API for SPI-NAND devices. Raw NAND controller drivers changes: - nandsim: - Switch to ->exec-op(). - meson: - Misc cleanups and fixes. - New OOB layout. - Sunxi: - A23/A33 NAND DMA support. - Ingenic: - Full reorganization and cleanup. - Clear separation between NAND controller and ECC engine. - Support JZ4740 an JZ4725B. - Denali: - Clear controller/chip separation. - ->exec_op() migration. - Various cleanups. - fsl_elbc: - Enable software ECC support. - Atmel: - Sam9x60 support. - GPMI: - Introduce the GPMI_IS_MXS() macro. - Various trivial/spelling/coding style fixes. SPI NOR core changes: - Print all JEDEC ID bytes on error - Fix comment of spi_nor_find_best_erase_type() - Add region locking flags for s25fl512s SPI NOR controller drivers changes: - intel-spi: - Avoid crossing 4K address boundary on read/write - Add support for Intel Comet Lake SPI serial flash" * tag 'mtd/for-5.2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (120 commits) mtd: part: fix incorrect format specifier for an unsigned long long mtd: lpddr_cmds: Mark expected switch fall-through mtd: phram: Mark expected switch fall-throughs mtd: cfi_cmdset_0002: Mark expected switch fall-throughs mtd: cfi_util: mark expected switch fall-throughs MAINTAINERS: MTD Git repository is hosted on kernel.org MAINTAINERS: Update jffs2 entry mtd: afs: add v2 partition parsing mtd: afs: factor the IIS read into partition parser mtd: afs: factor footer parsing into the v1 part parsing mtd: factor out v1 partition parsing mtd: afs: simplify partition detection mtd: afs: simplify partition parsing mtd: partitions: Add OF support to AFS partitions mtd: partitions: Add AFS partitions DT bindings mtd: afs: Move AFS partition parser to parsers subdir mtd: maps: Make uclinux_ram_map static mtd: maps: Allow MTD_PHYSMAP with MTD_RAM MAINTAINERS: Add myself as MTD maintainer MAINTAINERS: Remove my name from the MTD and NAND entries ...
2019-05-09MIPS: SGI-IP27: abstract chipset irq from bridgeThomas Bogendoerfer5-119/+265
Bridge ASIC is widely used in different SGI systems, but the connected chipset is either HUB, HEART or BEDROCK. This commit switches to irq domain hierarchy for hub and bridge interrupts to get bridge setup out of hub interrupt code. Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de> [paul.burton@mips.com: Resolve conflict with commit 69a07a41d908 ("MIPS: SGI-IP27: rework HUB interrupts").] Signed-off-by: Paul Burton <paul.burton@mips.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: James Hogan <jhogan@kernel.org> Cc: linux-mips@vger.kernel.org Cc: linux-kernel@vger.kernel.org
2019-05-09MIPS: SGI-IP27: use generic PCI driverThomas Bogendoerfer9-275/+266
Converted bridge code to a platform driver using the PCI generic driver framework and use adding platform devices during xtalk scan. This allows easier sharing bridge driver for other SGI platforms like IP30 (Octane) and IP35 (Origin 3k, Fuel, Tezro). Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de> [paul.burton@mips.com: - Leave __phys_to_dma(), __dma_to_phys() & pcibus_to_node() in arch/mips/pci/pci-ip27.c since the motivation for moving them disappeared when the driver stopped being moved to drivers/pci.] Signed-off-by: Paul Burton <paul.burton@mips.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: James Hogan <jhogan@kernel.org> Cc: linux-mips@vger.kernel.org Cc: linux-kernel@vger.kernel.org
2019-05-09MIPS: Fix Ingenic SoCs sometimes reporting wrong ISAPaul Cercueil1-0/+8
The config0 register in the Xburst CPUs with a processor ID of PRID_COMP_INGENIC_D0 report themselves as MIPS32r2 compatible, but they don't actually support this ISA. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Paul Burton <paul.burton@mips.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: James Hogan <jhogan@kernel.org> Cc: od@zcrc.me Cc: linux-mips@vger.kernel.org Cc: linux-kernel@vger.kernel.org
2019-05-09MIPS: perf: Fix build with CONFIG_CPU_BMIPS5000 enabledFlorian Fainelli1-18/+3
arch/mips/kernel/perf_event_mipsxx.c: In function 'mipsxx_pmu_enable_event': arch/mips/kernel/perf_event_mipsxx.c:326:21: error: unused variable 'event' [-Werror=unused-variable] struct perf_event *event = container_of(evt, struct perf_event, hw); ^~~~~ Fix this by making use of IS_ENABLED() to simplify the code and avoid unnecessary ifdefery. Fixes: 84002c88599d ("MIPS: perf: Fix perf with MT counting other threads") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Paul Burton <paul.burton@mips.com> Cc: linux-mips@linux-mips.org Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: James Hogan <jhogan@kernel.org> Cc: linux-kernel@vger.kernel.org Cc: linux-mips@vger.kernel.org Cc: stable@vger.kernel.org # v4.18+
2019-05-09Merge tag 'clk-for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk framework updates from Stephen Boyd: "We have a couple new features and changes in the core clk framework this time around because we've finally gotten around to fixing some long standing issues. There's still work to do though, so this pull request is largely laying down the foundation for all the driver changes to come in the next merge window. The first problem we're alleviating is how parents of clks are specified. With the new method, we should see lots of drivers migrate away from the current design of string comparisons on the entire clk tree to a more direct method where they can use clk_hw pointers or more localized names specified in DT or via clkdev. This should reduce our reliance on string comparisons for all the topology description logic that we've been using for years and hopefully speed some things up while avoiding problems we have with generating clk names. Beyond that we also got rid of the CLK_IS_BASIC flag because it wasn't really helping anyone and we introduced big-endian versions of the basic clk types so that we can get rid of clk_{readl,writel}(). Both of these are things that driver developers have tried to use over the years that I typically bat away during code reviews because they're not useful. It's great to see these two things go away so maintainers can save time not worrying about these things. On the driver side we got the usual collection of new SoC support and non-critical fixes and updates to existing code. The big topics that stand out are the new driver support for Mediatek MT8183 and MT8516 SoCs, Amlogic Meson8b and G12a SoCs, and the SiFive FU540 SoC. The other patches in the driver pile are mostly fixes for things that are being used for the first time or additions for clks that couldn't be tested before because there wasn't a consumer driver that exercised them. Details are below and also in the sub-maintainer tags. Core: - Remove clk_readl() and introduce BE versions of basic clk types - Rewrite how clk parents can be specified to allow DT/clkdev lookups - Removal of the CLK_IS_BASIC clk flag - Framework documentation updates and fixes New Drivers: - Support for STM32F769 - AT91 sam9x60 PMC support - SiFive FU540 PRCI and PLL support - Qualcomm QCS404 CDSP clk support - Qualcomm QCS404 Turing clk support - Mediatek MT8183 clock support - Mediatek MT8516 clock support - Milbeaut M10V clk controller support - Support for Cirrus Logic Lochnagar clks Updates: - Rework AT91 sckc DT bindings - Fix slow RC oscillator issue on sama5d3 - Mark UFS clk as critical on Hi-Silicon hi3660 SoCs - Various static analysis fixes/finds and const markings - Video Engine (ECLK) support on Aspeed SoCs - Xilinx ZynqMP Versal platform support - Convert Xilinx ZynqMP driver to be struct oriented - Fixes for Rockchip rk3328 and rk3288 SoCs - Sub-type for Rockchip SoCs where mux and divider aren't a single register - Remove SNVS clock from i.MX7UPL clock driver and bindings - Improve i.MX5 clock driver for i.MX50 support - Addition of ADC clock definition for Exynos 5410 SoC (Odroid XU) - Export a new clock for the MBUS controller on the A13 - Allwinner H6 fixes to support a finer clocking of the video and VPU engines - Add g12a support in the Amlogic axg audio clock controller - Add missing PCI USB clock on Rensas RZ/N1 - Add Z2 (Cortex-A53) clocks on Rensas R-Car E3 and RZ/G2E - A new helper DIV64_U64_ROUND_CLOSEST() in <linux/math64.h> - VPU and Video Decoder clocks on Amlogic Meson8b - Finally remove the wrong ABP Meson8b clock id - Add Video Decoder, PCIe PLL, and CPU Clocks on Amlogic G12A - Re-expose SAR_ADC_SEL and CTS_OSCIN on Amlogic G12A AO clock controller - Un-expose some Amlogic AXG-Audio input clocks IDs" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (172 commits) clk: Cache core in clk_fetch_parent_index() without names clk: imx: correct pfdv2 gate_bit/vld_bit operations clk: sifive: add a driver for the SiFive FU540 PRCI IP block clk: analogbits: add Wide-Range PLL library clk: imx: clk-pllv3: mark expected switch fall-throughs clk: imx8mq: Add dsi_ipg_div clk: imx: pllv4: add fractional-N pll support clk: sunxi-ng: Use the correct style for SPDX License Identifier clk: sprd: Use the correct style for SPDX License Identifier clk: renesas: Use the correct style for SPDX License Identifier clk: qcom: Use the correct style for SPDX License Identifier clk: davinci: Use the correct style for SPDX License Identifier clk: actions: Use the correct style for SPDX License Identifier clk: imx: keep uart clock on during system boot clk: imx: correct i.MX7D AV PLL num/denom offset dt-bindings: clk: add documentation for the SiFive PRCI driver clk: stm32mp1: Add ddrperfm clock clk: Remove CLK_IS_BASIC clk flag clock: milbeaut: Add Milbeaut M10V clock controller dt-bindings: clock: milbeaut: add Milbeaut clock description ...
2019-05-08Merge tag 'mips_5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linuxLinus Torvalds22-1825/+341
Pull MIPS updates from Paul Burton: - A set of memblock initialization improvements thanks to Serge Semin, tidying up after our conversion from bootmem to memblock back in v4.20. - Our eBPF JIT the previously supported only MIPS64r2 through MIPS64r5 is improved to also support MIPS64r6. Support for MIPS32 systems is introduced, with the caveat that it only works for programs that don't use 64 bit registers or operations - those will bail out & need to be interpreted. - Improvements to the allocation & configuration of our exception vector that should fix issues seen on some platforms using recent versions of U-Boot. - Some minor improvements to code generated for jump labels, along with enabling them by default for generic kernels. * tag 'mips_5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (27 commits) mips: Manually call fdt_init_reserved_mem() method mips: Make sure dt memory regions are valid mips: Perform early low memory test mips: Dump memblock regions for debugging mips: Add reserve-nomap memory type support mips: Use memblock to reserve the __nosave memory range mips: Discard post-CMA-init foreach loop mips: Reserve memory for the kernel image resources MIPS: Remove duplicate EBase configuration MIPS: Sync icache for whole exception vector MIPS: Always allocate exception vector for MIPSr2+ MIPS: Use memblock_phys_alloc() for exception vector mips: Combine memblock init and memory reservation loops mips: Discard rudiments from bootmem_init mips: Make sure kernel .bss exists in boot mem pool mips: vdso: drop unnecessary cc-ldoption Revert "MIPS: ralink: fix cpu clock of mt7621 and add dt clk devices" MIPS: generic: Enable CONFIG_JUMP_LABEL MIPS: jump_label: Use compact branches for >= r6 MIPS: jump_label: Remove redundant nops ...
2019-05-07Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds1-2/+2
Pull networking updates from David Miller: "Highlights: 1) Support AES128-CCM ciphers in kTLS, from Vakul Garg. 2) Add fib_sync_mem to control the amount of dirty memory we allow to queue up between synchronize RCU calls, from David Ahern. 3) Make flow classifier more lockless, from Vlad Buslov. 4) Add PHY downshift support to aquantia driver, from Heiner Kallweit. 5) Add SKB cache for TCP rx and tx, from Eric Dumazet. This reduces contention on SLAB spinlocks in heavy RPC workloads. 6) Partial GSO offload support in XFRM, from Boris Pismenny. 7) Add fast link down support to ethtool, from Heiner Kallweit. 8) Use siphash for IP ID generator, from Eric Dumazet. 9) Pull nexthops even further out from ipv4/ipv6 routes and FIB entries, from David Ahern. 10) Move skb->xmit_more into a per-cpu variable, from Florian Westphal. 11) Improve eBPF verifier speed and increase maximum program size, from Alexei Starovoitov. 12) Eliminate per-bucket spinlocks in rhashtable, and instead use bit spinlocks. From Neil Brown. 13) Allow tunneling with GUE encap in ipvs, from Jacky Hu. 14) Improve link partner cap detection in generic PHY code, from Heiner Kallweit. 15) Add layer 2 encap support to bpf_skb_adjust_room(), from Alan Maguire. 16) Remove SKB list implementation assumptions in SCTP, your's truly. 17) Various cleanups, optimizations, and simplifications in r8169 driver. From Heiner Kallweit. 18) Add memory accounting on TX and RX path of SCTP, from Xin Long. 19) Switch PHY drivers over to use dynamic featue detection, from Heiner Kallweit. 20) Support flow steering without masking in dpaa2-eth, from Ioana Ciocoi. 21) Implement ndo_get_devlink_port in netdevsim driver, from Jiri Pirko. 22) Increase the strict parsing of current and future netlink attributes, also export such policies to userspace. From Johannes Berg. 23) Allow DSA tag drivers to be modular, from Andrew Lunn. 24) Remove legacy DSA probing support, also from Andrew Lunn. 25) Allow ll_temac driver to be used on non-x86 platforms, from Esben Haabendal. 26) Add a generic tracepoint for TX queue timeouts to ease debugging, from Cong Wang. 27) More indirect call optimizations, from Paolo Abeni" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1763 commits) cxgb4: Fix error path in cxgb4_init_module net: phy: improve pause mode reporting in phy_print_status dt-bindings: net: Fix a typo in the phy-mode list for ethernet bindings net: macb: Change interrupt and napi enable order in open net: ll_temac: Improve error message on error IRQ net/sched: remove block pointer from common offload structure net: ethernet: support of_get_mac_address new ERR_PTR error net: usb: smsc: fix warning reported by kbuild test robot staging: octeon-ethernet: Fix of_get_mac_address ERR_PTR check net: dsa: support of_get_mac_address new ERR_PTR error net: dsa: sja1105: Fix status initialization in sja1105_get_ethtool_stats vrf: sit mtu should not be updated when vrf netdev is the link net: dsa: Fix error cleanup path in dsa_init_module l2tp: Fix possible NULL pointer dereference taprio: add null check on sched_nest to avoid potential null pointer dereference net: mvpp2: cls: fix less than zero check on a u32 variable net_sched: sch_fq: handle non connected flows net_sched: sch_fq: do not assume EDT packets are ordered net: hns3: use devm_kcalloc when allocating desc_cb net: hns3: some cleanup for struct hns3_enet_ring ...
2019-05-07Merge tag 'audit-pr-20190507' of ↵Linus Torvalds2-4/+4
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit Pull audit updates from Paul Moore: "We've got a reasonably broad set of audit patches for the v5.2 merge window, the highlights are below: - The biggest change, and the source of all the arch/* changes, is the patchset from Dmitry to help enable some of the work he is doing around PTRACE_GET_SYSCALL_INFO. To be honest, including this in the audit tree is a bit of a stretch, but it does help move audit a little further along towards proper syscall auditing for all arches, and everyone else seemed to agree that audit was a "good" spot for this to land (or maybe they just didn't want to merge it? dunno.). - We can now audit time/NTP adjustments. - We continue the work to connect associated audit records into a single event" * tag 'audit-pr-20190507' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit: (21 commits) audit: fix a memory leak bug ntp: Audit NTP parameters adjustment timekeeping: Audit clock adjustments audit: purge unnecessary list_empty calls audit: link integrity evm_write_xattrs record to syscall event syscall_get_arch: add "struct task_struct *" argument unicore32: define syscall_get_arch() Move EM_UNICORE to uapi/linux/elf-em.h nios2: define syscall_get_arch() nds32: define syscall_get_arch() Move EM_NDS32 to uapi/linux/elf-em.h m68k: define syscall_get_arch() hexagon: define syscall_get_arch() Move EM_HEXAGON to uapi/linux/elf-em.h h8300: define syscall_get_arch() c6x: define syscall_get_arch() arc: define syscall_get_arch() Move EM_ARCOMPACT and EM_ARCV2 to uapi/linux/elf-em.h audit: Make audit_log_cap and audit_copy_inode static audit: connect LOGIN record to its syscall record ...
2019-05-07Merge tag 'for-5.2/block-20190507' of git://git.kernel.dk/linux-blockLinus Torvalds7-7/+0
Pull block updates from Jens Axboe: "Nothing major in this series, just fixes and improvements all over the map. This contains: - Series of fixes for sed-opal (David, Jonas) - Fixes and performance tweaks for BFQ (via Paolo) - Set of fixes for bcache (via Coly) - Set of fixes for md (via Song) - Enabling multi-page for passthrough requests (Ming) - Queue release fix series (Ming) - Device notification improvements (Martin) - Propagate underlying device rotational status in loop (Holger) - Removal of mtip32xx trim support, which has been disabled for years (Christoph) - Improvement and cleanup of nvme command handling (Christoph) - Add block SPDX tags (Christoph) - Cleanup/hardening of bio/bvec iteration (Christoph) - A few NVMe pull requests (Christoph) - Removal of CONFIG_LBDAF (Christoph) - Various little fixes here and there" * tag 'for-5.2/block-20190507' of git://git.kernel.dk/linux-block: (164 commits) block: fix mismerge in bvec_advance block: don't drain in-progress dispatch in blk_cleanup_queue() blk-mq: move cancel of hctx->run_work into blk_mq_hw_sysfs_release blk-mq: always free hctx after request queue is freed blk-mq: split blk_mq_alloc_and_init_hctx into two parts blk-mq: free hw queue's resource in hctx's release handler blk-mq: move cancel of requeue_work into blk_mq_release blk-mq: grab .q_usage_counter when queuing request from plug code path block: fix function name in comment nvmet: protect discovery change log event list iteration nvme: mark nvme_core_init and nvme_core_exit static nvme: move command size checks to the core nvme-fabrics: check more command sizes nvme-pci: check more command sizes nvme-pci: remove an unneeded variable initialization nvme-pci: unquiesce admin queue on shutdown nvme-pci: shutdown on timeout during deletion nvme-pci: fix psdt field for single segment sgls nvme-multipath: don't print ANA group state by default nvme-multipath: split bios with the ns_head bio_set before submitting ...
2019-05-07Merge tag 'pidfd-v5.2-rc1' of ↵Linus Torvalds1-1/+0
git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux Pull pidfd updates from Christian Brauner: "This patchset makes it possible to retrieve pidfds at process creation time by introducing the new flag CLONE_PIDFD to the clone() system call. Linus originally suggested to implement this as a new flag to clone() instead of making it a separate system call. After a thorough review from Oleg CLONE_PIDFD returns pidfds in the parent_tidptr argument. This means we can give back the associated pid and the pidfd at the same time. Access to process metadata information thus becomes rather trivial. As has been agreed, CLONE_PIDFD creates file descriptors based on anonymous inodes similar to the new mount api. They are made unconditional by this patchset as they are now needed by core kernel code (vfs, pidfd) even more than they already were before (timerfd, signalfd, io_uring, epoll etc.). The core patchset is rather small. The bulky looking changelist is caused by David's very simple changes to Kconfig to make anon inodes unconditional. A pidfd comes with additional information in fdinfo if the kernel supports procfs. The fdinfo file contains the pid of the process in the callers pid namespace in the same format as the procfs status file, i.e. "Pid:\t%d". To remove worries about missing metadata access this patchset comes with a sample/test program that illustrates how a combination of CLONE_PIDFD and pidfd_send_signal() can be used to gain race-free access to process metadata through /proc/<pid>. Further work based on this patchset has been done by Joel. His work makes pidfds pollable. It finished too late for this merge window. I would prefer to have it sitting in linux-next for a while and send it for inclusion during the 5.3 merge window" * tag 'pidfd-v5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux: samples: show race-free pidfd metadata access signal: support CLONE_PIDFD with pidfd_send_signal clone: add CLONE_PIDFD Make anon_inodes unconditional
2019-05-07Merge branch 'clk-ti' into clk-nextStephen Boyd1-1/+1
* clk-ti: clk: Remove CLK_IS_BASIC clk flag clk: ti: dra7: disable the RNG and TIMER12 clkctrl clocks on HS devices clk: ti: dra7x: prevent non-existing clkctrl clocks from registering ARM: omap2+: hwmod: drop CLK_IS_BASIC flag usage clk: ti: export the omap2_clk_is_hw_omap call
2019-05-06Merge tag 'arm64-mmiowb' of ↵Linus Torvalds3-3/+26
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull mmiowb removal from Will Deacon: "Remove Mysterious Macro Intended to Obscure Weird Behaviours (mmiowb()) Remove mmiowb() from the kernel memory barrier API and instead, for architectures that need it, hide the barrier inside spin_unlock() when MMIO has been performed inside the critical section. The only relatively recent changes have been addressing review comments on the documentation, which is in a much better shape thanks to the efforts of Ben and Ingo. I was initially planning to split this into two pull requests so that you could run the coccinelle script yourself, however it's been plain sailing in linux-next so I've just included the whole lot here to keep things simple" * tag 'arm64-mmiowb' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (23 commits) docs/memory-barriers.txt: Update I/O section to be clearer about CPU vs thread docs/memory-barriers.txt: Fix style, spacing and grammar in I/O section arch: Remove dummy mmiowb() definitions from arch code net/ethernet/silan/sc92031: Remove stale comment about mmiowb() i40iw: Redefine i40iw_mmiowb() to do nothing scsi/qla1280: Remove stale comment about mmiowb() drivers: Remove explicit invocations of mmiowb() drivers: Remove useless trailing comments from mmiowb() invocations Documentation: Kill all references to mmiowb() riscv/mmiowb: Hook up mmwiob() implementation to asm-generic code powerpc/mmiowb: Hook up mmwiob() implementation to asm-generic code ia64/mmiowb: Add unconditional mmiowb() to arch_spin_unlock() mips/mmiowb: Add unconditional mmiowb() to arch_spin_unlock() sh/mmiowb: Add unconditional mmiowb() to arch_spin_unlock() m68k/io: Remove useless definition of mmiowb() nds32/io: Remove useless definition of mmiowb() x86/io: Remove useless definition of mmiowb() arm64/io: Remove useless definition of mmiowb() ARM/io: Remove useless definition of mmiowb() mmiowb: Hook up mmiowb helpers to spinlocks and generic I/O accessors ...
2019-05-06Merge branch 'locking-core-for-linus' of ↵Linus Torvalds1-7/+0
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull locking updates from Ingo Molnar: "Here are the locking changes in this cycle: - rwsem unification and simpler micro-optimizations to prepare for more intrusive (and more lucrative) scalability improvements in v5.3 (Waiman Long) - Lockdep irq state tracking flag usage cleanups (Frederic Weisbecker) - static key improvements (Jakub Kicinski, Peter Zijlstra) - misc updates, cleanups and smaller fixes" * 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (26 commits) locking/lockdep: Remove unnecessary unlikely() locking/static_key: Don't take sleeping locks in __static_key_slow_dec_deferred() locking/static_key: Factor out the fast path of static_key_slow_dec() locking/static_key: Add support for deferred static branches locking/lockdep: Test all incompatible scenarios at once in check_irq_usage() locking/lockdep: Avoid bogus Clang warning locking/lockdep: Generate LOCKF_ bit composites locking/lockdep: Use expanded masks on find_usage_*() functions locking/lockdep: Map remaining magic numbers to lock usage mask names locking/lockdep: Move valid_state() inside CONFIG_TRACE_IRQFLAGS && CONFIG_PROVE_LOCKING locking/rwsem: Prevent unneeded warning during locking selftest locking/rwsem: Optimize rwsem structure for uncontended lock acquisition locking/rwsem: Enable lock event counting locking/lock_events: Don't show pvqspinlock events on bare metal locking/lock_events: Make lock_events available for all archs & other locks locking/qspinlock_stat: Introduce generic lockevent_*() counting APIs locking/rwsem: Enhance DEBUG_RWSEMS_WARN_ON() macro locking/rwsem: Add debug check for __down_read*() locking/rwsem: Micro-optimize rwsem_try_read_lock_unqueued() locking/rwsem: Move rwsem internal function declarations to rwsem-xadd.h ...
2019-05-06Merge branch 'core-mm-for-linus' of ↵Linus Torvalds1-17/+0
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull unified TLB flushing from Ingo Molnar: "This contains the generic mmu_gather feature from Peter Zijlstra, which is an all-arch unification of TLB flushing APIs, via the following (broad) steps: - enhance the <asm-generic/tlb.h> APIs to cover more arch details - convert most TLB flushing arch implementations to the generic <asm-generic/tlb.h> APIs. - remove leftovers of per arch implementations After this series every single architecture makes use of the unified TLB flushing APIs" * 'core-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: mm/resource: Use resource_overlaps() to simplify region_intersects() ia64/tlb: Eradicate tlb_migrate_finish() callback asm-generic/tlb: Remove tlb_table_flush() asm-generic/tlb: Remove tlb_flush_mmu_free() asm-generic/tlb: Remove CONFIG_HAVE_GENERIC_MMU_GATHER asm-generic/tlb: Remove arch_tlb*_mmu() s390/tlb: Convert to generic mmu_gather asm-generic/tlb: Introduce CONFIG_HAVE_MMU_GATHER_NO_GATHER=y arch/tlb: Clean up simple architectures um/tlb: Convert to generic mmu_gather sh/tlb: Convert SH to generic mmu_gather ia64/tlb: Convert to generic mmu_gather arm/tlb: Convert to generic mmu_gather asm-generic/tlb, arch: Invert CONFIG_HAVE_RCU_TABLE_INVALIDATE asm-generic/tlb, ia64: Conditionally provide tlb_migrate_finish() asm-generic/tlb: Provide generic tlb_flush() based on flush_tlb_mm() asm-generic/tlb, arch: Provide generic tlb_flush() based on flush_tlb_range() asm-generic/tlb, arch: Provide generic VIPT cache flush asm-generic/tlb, arch: Provide CONFIG_HAVE_MMU_GATHER_PAGE_SIZE asm-generic/tlb: Provide a comment
2019-05-06thermal/drivers/core: Remove the module Kconfig's optionDaniel Lezcano2-2/+2
The module support for the thermal subsystem makes little sense: - some subsystems relying on it are not modules, thus forcing the framework to be compiled in - it is compiled in for almost every configs, the remaining ones are a few platforms where I don't see why we can not switch the thermal to 'y'. The drivers can stay in tristate. - platforms need the thermal to be ready as soon as possible at boot time in order to mitigate Usually the subsystems framework are compiled-in and the plugs are as module. Remove the module option. The removal of the module related dead code will come after this patch gets in or is acked. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Guenter Roeck <groeck@chromium.org> For mini2440: Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Paul Burton <paul.burton@mips.com> # MIPS part Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2019-05-05mips: Manually call fdt_init_reserved_mem() methodSerge Semin1-0/+3
Since memblock-patchset was introduced the reserved-memory nodes are supported being declared in dt-files. So these nodes are actually parsed during the arch setup procedure when the early_init_fdt_scan_reserved_mem() method is called. But due to the arch-specific boot mem_map container utilization we need to manually call the fdt_init_reserved_mem() method after all the available and reserved memory has been moved to memblock. The first function call performed before bootmem_init() by the early_init_fdt_scan_reserved_mem() routine fails due to the lack of any memblock memory regions to allocate from at that stage. Signed-off-by: Serge Semin <fancer.lancer@gmail.com> Signed-off-by: Paul Burton <paul.burton@mips.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: James Hogan <jhogan@kernel.org> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Thomas Bogendoerfer <tbogendoerfer@suse.de> Cc: Huacai Chen <chenhc@lemote.com> Cc: Stefan Agner <stefan@agner.ch> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Cc: Juergen Gross <jgross@suse.com> Cc: Serge Semin <Sergey.Semin@t-platforms.ru> Cc: linux-mips@vger.kernel.org Cc: linux-kernel@vger.kernel.org
2019-05-05mips: Make sure dt memory regions are validSerge Semin1-1/+13
There are situations when memory regions coming from dts may be too big for the platform physical address space. This especially concerns XPA-capable systems. Bootloader may determine more than 4GB memory available and pass it to the kernel over dts memory node, while kernel is built without XPA/64BIT support. In this case the region may either simply be truncated by add_memory_region() method or by u64->phys_addr_t type casting. But in worst case the method can even drop the memory region if it exceeds PHYS_ADDR_MAX size. So lets make sure the retrieved from dts memory regions are valid, and if some of them aren't, just manually truncate them with a warning printed out. Signed-off-by: Serge Semin <fancer.lancer@gmail.com> Signed-off-by: Paul Burton <paul.burton@mips.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: James Hogan <jhogan@kernel.org> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Thomas Bogendoerfer <tbogendoerfer@suse.de> Cc: Huacai Chen <chenhc@lemote.com> Cc: Stefan Agner <stefan@agner.ch> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Cc: Juergen Gross <jgross@suse.com> Cc: Serge Semin <Sergey.Semin@t-platforms.ru> Cc: linux-mips@vger.kernel.org Cc: linux-kernel@vger.kernel.org
2019-05-05Merge tag 'nand/for-5.2' of ↵Richard Weinberger11-14/+14
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux into mtd/next NAND core changes: - Support having the bad block markers in either the first, second or last page of a block. The combination of all three location is now possible. - Constification of NAND_OP_PARSER(_PATTERN) elements. - Generic NAND DT bindings changed to yaml format (can be used to check the proposed bindings. First platform to be fully supported: sunxi. - Stopped using several legacy hooks. - Preparation to use the generic NAND layer with the addition of several helpers and the removal of the struct nand_chip from generic functions. - Kconfig cleanup to prepare the introduction of external ECC engines support. - Fallthrough comments. - Introduction of the SPI-mem dirmap API for SPI-NAND devices. Raw NAND controller drivers changes: - nandsim: * Switch to ->exec-op(). - meson: * Misc cleanups and fixes. * New OOB layout. - Sunxi: * A23/A33 NAND DMA support. - Ingenic: * Full reorganization and cleanup. * Clear separation between NAND controller and ECC engine. * Support JZ4740 an JZ4725B. - Denali: * Clear controller/chip separation. * ->exec_op() migration. * Various cleanups. - fsl_elbc: * Enable software ECC support. - Atmel: * Sam9x60 support. - GPMI: * Introduce the GPMI_IS_MXS() macro. - Various trivial/spelling/coding style fixes.
2019-05-03mips: Perform early low memory testSerge Semin1-0/+2
memblock subsystem provides a method to optionally test the passed memory region in case if it was requested via special kernel boot argument. Lets add the function at the bottom of the arch_mem_init() method. Testing at this point in the boot sequence should be safe since all critical areas are now reserved and a minimum of allocations have been done. Reviewed-by: Matt Redfearn <matt.redfearn@mips.com> Signed-off-by: Serge Semin <fancer.lancer@gmail.com> Signed-off-by: Paul Burton <paul.burton@mips.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: James Hogan <jhogan@kernel.org> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Thomas Bogendoerfer <tbogendoerfer@suse.de> Cc: Huacai Chen <chenhc@lemote.com> Cc: Stefan Agner <stefan@agner.ch> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Cc: Juergen Gross <jgross@suse.com> Cc: Serge Semin <Sergey.Semin@t-platforms.ru> Cc: linux-mips@vger.kernel.org Cc: linux-kernel@vger.kernel.org
2019-05-03mips: Dump memblock regions for debuggingSerge Semin1-0/+2
It is useful to have the whole memblock memory space printed to console when basic memlock initializations are done. It can be performed by ready-to-use method memblock_dump_all(), which prints the available and reserved memory spaces if memblock=debug kernel parameter is specified. Lets call it at the very end of arch_mem_init() function, when all memblock memory and reserved regions are defined, but before any serious allocation is performed. Signed-off-by: Serge Semin <fancer.lancer@gmail.com> Signed-off-by: Paul Burton <paul.burton@mips.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: James Hogan <jhogan@kernel.org> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Thomas Bogendoerfer <tbogendoerfer@suse.de> Cc: Huacai Chen <chenhc@lemote.com> Cc: Stefan Agner <stefan@agner.ch> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Cc: Juergen Gross <jgross@suse.com> Cc: Serge Semin <Sergey.Semin@t-platforms.ru> Cc: linux-mips@vger.kernel.org Cc: linux-kernel@vger.kernel.org
2019-05-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-2/+3
Three trivial overlapping conflicts. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-02mips: Add reserve-nomap memory type supportSerge Semin3-1/+12
It might be necessary to prevent the virtual mapping creation for a requested memory region. For instance there is a "no-map" property indicating exactly this feature. In this case we need to not only reserve the specified region by pretending it doesn't exist in the memory space, but completely remove the range from system just by removing it from memblock. The same way it's done in default early_init_dt_reserve_memory_arch() method. Signed-off-by: Serge Semin <fancer.lancer@gmail.com> Signed-off-by: Paul Burton <paul.burton@mips.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: James Hogan <jhogan@kernel.org> Cc: Matt Redfearn <matt.redfearn@mips.com> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Thomas Bogendoerfer <tbogendoerfer@suse.de> Cc: Huacai Chen <chenhc@lemote.com> Cc: Stefan Agner <stefan@agner.ch> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Cc: Juergen Gross <jgross@suse.com> Cc: linux-mips@vger.kernel.org Cc: linux-kernel@vger.kernel.org
2019-05-02mips: Use memblock to reserve the __nosave memory rangeSerge Semin1-2/+3
Originally before legacy bootmem was removed, the memory for the range was correctly reserved by reserve_bootmem_region(). But since memblock has been selected for early memory allocation the function can be utilized only after paging is fully initialized (as it is done by memblock_free_all() function). So calling it from arch_mem_init() method is prone to errors, and at this stage we need to reserve the memory in the memblock allocator. Signed-off-by: Serge Semin <fancer.lancer@gmail.com> Signed-off-by: Paul Burton <paul.burton@mips.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: James Hogan <jhogan@kernel.org> Cc: Matt Redfearn <matt.redfearn@mips.com> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Thomas Bogendoerfer <tbogendoerfer@suse.de> Cc: Huacai Chen <chenhc@lemote.com> Cc: Stefan Agner <stefan@agner.ch> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Cc: Juergen Gross <jgross@suse.com> Cc: linux-mips@vger.kernel.org Cc: linux-kernel@vger.kernel.org
2019-05-02mips: Discard post-CMA-init foreach loopSerge Semin1-5/+0
Really the loop is pointless, since it walks over memblock-reserved memory regions and mark them as reserved in memblock. Before bootmem was removed from the kernel, this loop had been used to map the memory reserved by CMA into the legacy bootmem allocator. But now the early memory allocator is memblock, which is used by CMA for reservation, so we don't need any mapping anymore. Reviewed-by: Matt Redfearn <matt.redfearn@mips.com> Signed-off-by: Serge Semin <fancer.lancer@gmail.com> Signed-off-by: Paul Burton <paul.burton@mips.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: James Hogan <jhogan@kernel.org> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Thomas Bogendoerfer <tbogendoerfer@suse.de> Cc: Huacai Chen <chenhc@lemote.com> Cc: Stefan Agner <stefan@agner.ch> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Cc: Juergen Gross <jgross@suse.com> Cc: linux-mips@vger.kernel.org Cc: linux-kernel@vger.kernel.org
2019-05-02mips: Reserve memory for the kernel image resourcesSerge Semin1-27/+3
The reserved_end variable had been used by the bootmem_init() code to find a lowest limit of memory available for memmap blob. The original code just tried to find a free memory space higher than kernel was placed. This limitation seems justified for the memmap ragion search process, but I can't see any obvious reason to reserve the unused space below kernel seeing some platforms place it much higher than standard 1MB. Moreover the RELOCATION config enables it to be loaded at any memory address. So lets reserve the memory occupied by the kernel only, leaving the region below being free for allocations. After doing this we can now discard the code freeing a space between kernel _text and VMLINUX_LOAD_ADDRESS symbols since it's going to be free anyway (unless marked as reserved by platforms). Signed-off-by: Serge Semin <fancer.lancer@gmail.com> Signed-off-by: Paul Burton <paul.burton@mips.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: James Hogan <jhogan@kernel.org> Cc: Matt Redfearn <matt.redfearn@mips.com> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Thomas Bogendoerfer <tbogendoerfer@suse.de> Cc: Huacai Chen <chenhc@lemote.com> Cc: Stefan Agner <stefan@agner.ch> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Cc: Juergen Gross <jgross@suse.com> Cc: linux-mips@vger.kernel.org Cc: linux-kernel@vger.kernel.org
2019-05-02MIPS: Remove duplicate EBase configurationPaul Burton1-17/+3
Clean up our configuration of the EBase register by making configure_exception_vector() write to it unconditionally on systems implementing MIPSr2 or higher, and removing the duplicate code in per_cpu_trap_init(). The latter would have duplicated work on systems with vectored interrupts, and didn't set BEV for safety like the configure_exception_vector() version of the code does. Signed-off-by: Paul Burton <paul.burton@mips.com> Reviewed-by: Serge Semin <fancer.lancer@gmail.com> Tested-by: Serge Semin <fancer.lancer@gmail.com> Cc: linux-mips@vger.kernel.org
2019-05-02MIPS: Sync icache for whole exception vectorPaul Burton1-1/+1
Rather than performing cache flushing for a fixed 0x400 bytes, use the actual size of the vector in order to ensure we cover all emitted code on systems that make use of vectored interrupts. Signed-off-by: Paul Burton <paul.burton@mips.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Serge Semin <fancer.lancer@gmail.com> Tested-by: Serge Semin <fancer.lancer@gmail.com> Cc: linux-mips@vger.kernel.org
2019-05-02MIPS: Always allocate exception vector for MIPSr2+Paul Burton1-20/+15
Currently we allocate the exception vector on systems which use a vectored interrupt mode, but otherwise attempt to reuse whatever exception vector the bootloader uses. This can be problematic for a number of reasons: 1) The memory isn't properly marked reserved in the memblock allocator. We've relied on the fact that EBase is generally in the memory below the kernel image which we don't free, but this is about to change. 2) Recent versions of U-Boot place their exception vector high in kseg0, in memory which isn't protected by being lower than the kernel anyway & can end up being clobbered. 3) We are unnecessarily reliant upon there being memory at the address EBase points to upon entry to the kernel. This is often the case, but if the bootloader doesn't configure EBase & leaves it with its default value then we rely upon there being memory at physical address 0 for no good reason. Improve this situation by allocating the exception vector in all cases when running on MIPSr2 or higher, and reserving the memory for MIPSr1 or lower. This ensures we don't clobber the exception vector in any configuration, and for MIPSr2 & higher removes the need for memory at physical address 0. Signed-off-by: Paul Burton <paul.burton@mips.com> Reviewed-by: Serge Semin <fancer.lancer@gmail.com> Tested-by: Serge Semin <fancer.lancer@gmail.com> Cc: linux-mips@vger.kernel.org
2019-05-02MIPS: Use memblock_phys_alloc() for exception vectorPaul Burton1-4/+4
Allocate the exception vector using memblock_phys_alloc() which gives us a physical address, rather than the previous convoluted setup which obtained a virtual address using memblock_alloc(), converted it to a physical address & then back to a virtual address. Signed-off-by: Paul Burton <paul.burton@mips.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Serge Semin <fancer.lancer@gmail.com> Tested-by: Serge Semin <fancer.lancer@gmail.com> Cc: linux-mips@vger.kernel.org
2019-04-26clk: Remove CLK_IS_BASIC clk flagStephen Boyd1-1/+1
This flag was historically used to indicate that a clk is a "basic" type of clk like a mux, divider, gate, etc. This never turned out to be very useful though because it was hard to cleanly split "basic" clks from other clks in a system. This one flag was a way for type introspection and it just didn't scale. If anything, it was used by the TI clk driver to indicate that a clk_hw wasn't contained in the SoC specific clk structure. We can get rid of this define now that TI is finding those clks a different way. Cc: Tero Kristo <t-kristo@ti.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paul Burton <paul.burton@mips.com> Cc: James Hogan <jhogan@kernel.org> Cc: <linux-mips@vger.kernel.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Kevin Hilman <khilman@baylibre.com> Cc: <linux-pwm@vger.kernel.org> Cc: <linux-amlogic@lists.infradead.org> Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller1-2/+3
Alexei Starovoitov says: ==================== pull-request: bpf 2019-04-25 The following pull-request contains BPF updates for your *net* tree. The main changes are: 1) the bpf verifier fix to properly mark registers in all stack frames, from Paul. 2) preempt_enable_no_resched->preempt_enable fix, from Peter. 3) other misc fixes. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller5-7/+13
Two easy cases of overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>