summaryrefslogtreecommitdiffstats
path: root/arch/mips/pci
AgeCommit message (Collapse)AuthorFilesLines
2017-05-18MIPS: PCI: Remove unused busn_offsetBjorn Helgaas1-2/+1
pci_add_resource_offset() is for host bridge windows where the bridge translates CPU addresses to PCI bus addresses by adding an offset. To my knowledge, no host bridge translates bus numbers, so this is only useful for MEM and IO windows. In any event, host->busn_offset is never set to anything other than zero, so pci_add_resource() is sufficient. a2e50f53d535 ("MIPS: PCI: Add a hook for IORESOURCE_BUS in pci_controller/bridge_controller") also added busn_resource itself. This is currently unused but may be used by future SGI IP27 fixes, so I left it there. Tested-by: Joshua Kinard <kumba@gentoo.org> # SGI IP30 and IP27 Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Joshua Kinard <kumba@gentoo.org>
2017-05-12Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds1-2/+2
Pull MIPS updates from James Hogan: "math-emu: - Add missing clearing of BLTZALL and BGEZALL emulation counters - Fix BC1EQZ and BC1NEZ condition handling - Fix BLEZL and BGTZL identification BPF: - Add JIT support for SKF_AD_HATYPE - Use unsigned access for unsigned SKB fields - Quit clobbering callee saved registers in JIT code - Fix multiple problems in JIT skb access helpers Loongson 3: - Select MIPS_L1_CACHE_SHIFT_6 Octeon: - Remove vestiges of CONFIG_CAVIUM_OCTEON_2ND_KERNEL - Remove unused L2C types and macros. - Remove unused SLI types and macros. - Fix compile error when USB is not enabled. - Octeon: Remove unused PCIERCX types and macros. - Octeon: Clean up platform code. SNI: - Remove recursive include of cpu-feature-overrides.h Sibyte: - Export symbol periph_rev to sb1250-mac network driver. - Fix Kconfig warning. Generic platform: - Enable Root FS on NFS in generic_defconfig SMP-MT: - Use CPU interrupt controller IPI IRQ domain support UASM: - Add support for LHU for uasm. - Remove needless ISA abstraction mm: - Add 48-bit VA space and 4-level page tables for 4K pages. PCI: - Add controllers before the specified head irqchip driver for MIPS CPU: - Replace magic 0x100 with IE_SW0 - Prepare for non-legacy IRQ domains - Introduce IPI IRQ domain support MAINTAINERS: - Update email-id of Rahul Bedarkar NET: - sb1250-mac: Add missing MODULE_LICENSE() CPUFREQ: - Loongson2: drop set_cpus_allowed_ptr() Misc: - Disable Werror when W= is set - Opt into HAVE_COPY_THREAD_TLS - Enable GENERIC_CPU_AUTOPROBE - Use common outgoing-CPU-notification code - Remove dead define of ST_OFF - Remove CONFIG_ARCH_HAS_ILOG2_U{32,64} - Stengthen IPI IRQ domain sanity check - Remove confusing else statement in __do_page_fault() - Don't unnecessarily include kmalloc.h into <asm/cache.h>. - Delete unused definition of SMP_CACHE_SHIFT. - Delete redundant definition of SMP_CACHE_BYTES" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (39 commits) MIPS: Sibyte: Fix Kconfig warning. MIPS: Sibyte: Export symbol periph_rev to sb1250-mac network driver. NET: sb1250-mac: Add missing MODULE_LICENSE() MAINTAINERS: Update email-id of Rahul Bedarkar MIPS: Remove confusing else statement in __do_page_fault() MIPS: Stengthen IPI IRQ domain sanity check MIPS: smp-mt: Use CPU interrupt controller IPI IRQ domain support irqchip: mips-cpu: Introduce IPI IRQ domain support irqchip: mips-cpu: Prepare for non-legacy IRQ domains irqchip: mips-cpu: Replace magic 0x100 with IE_SW0 MIPS: Remove CONFIG_ARCH_HAS_ILOG2_U{32,64} MIPS: generic: Enable Root FS on NFS in generic_defconfig MIPS: mach-rm: Remove recursive include of cpu-feature-overrides.h MIPS: Opt into HAVE_COPY_THREAD_TLS CPUFREQ: Loongson2: drop set_cpus_allowed_ptr() MIPS: uasm: Remove needless ISA abstraction MIPS: Remove dead define of ST_OFF MIPS: Use common outgoing-CPU-notification code MIPS: math-emu: Fix BC1EQZ and BC1NEZ condition handling MIPS: r2-on-r6-emu: Clear BLTZALL and BGEZALL debugfs counters ...
2017-05-08Merge tag 'pci-v4.12-changes' of ↵Linus Torvalds1-24/+0
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: - add framework for supporting PCIe devices in Endpoint mode (Kishon Vijay Abraham I) - use non-postable PCI config space mappings when possible (Lorenzo Pieralisi) - clean up and unify mmap of PCI BARs (David Woodhouse) - export and unify Function Level Reset support (Christoph Hellwig) - avoid FLR for Intel 82579 NICs (Sasha Neftin) - add pci_request_irq() and pci_free_irq() helpers (Christoph Hellwig) - short-circuit config access failures for disconnected devices (Keith Busch) - remove D3 sleep delay when possible (Adrian Hunter) - freeze PME scan before suspending devices (Lukas Wunner) - stop disabling MSI/MSI-X in pci_device_shutdown() (Prarit Bhargava) - disable boot interrupt quirk for ASUS M2N-LR (Stefan Assmann) - add arch-specific alignment control to improve device passthrough by avoiding multiple BARs in a page (Yongji Xie) - add sysfs sriov_drivers_autoprobe to control VF driver binding (Bodong Wang) - allow slots below PCI-to-PCIe "reverse bridges" (Bjorn Helgaas) - fix crashes when unbinding host controllers that don't support removal (Brian Norris) - add driver for MicroSemi Switchtec management interface (Logan Gunthorpe) - add driver for Faraday Technology FTPCI100 host bridge (Linus Walleij) - add i.MX7D support (Andrey Smirnov) - use generic MSI support for Aardvark (Thomas Petazzoni) - make Rockchip driver modular (Brian Norris) - advertise 128-byte Read Completion Boundary support for Rockchip (Shawn Lin) - advertise PCI_EXP_LNKSTA_SLC for Rockchip root port (Shawn Lin) - convert atomic_t to refcount_t in HV driver (Elena Reshetova) - add CPU IRQ affinity in HV driver (K. Y. Srinivasan) - fix PCI bus removal in HV driver (Long Li) - add support for ThunderX2 DMA alias topology (Jayachandran C) - add ThunderX pass2.x 2nd node MCFG quirk (Tomasz Nowicki) - add ITE 8893 bridge DMA alias quirk (Jarod Wilson) - restrict Cavium ACS quirk only to CN81xx/CN83xx/CN88xx devices (Manish Jaggi) * tag 'pci-v4.12-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (146 commits) PCI: Don't allow unbinding host controllers that aren't prepared ARM: DRA7: clockdomain: Change the CLKTRCTRL of CM_PCIE_CLKSTCTRL to SW_WKUP MAINTAINERS: Add PCI Endpoint maintainer Documentation: PCI: Add userguide for PCI endpoint test function tools: PCI: Add sample test script to invoke pcitest tools: PCI: Add a userspace tool to test PCI endpoint Documentation: misc-devices: Add Documentation for pci-endpoint-test driver misc: Add host side PCI driver for PCI test function device PCI: Add device IDs for DRA74x and DRA72x dt-bindings: PCI: dra7xx: Add DT bindings to enable unaligned access PCI: dwc: dra7xx: Workaround for errata id i870 dt-bindings: PCI: dra7xx: Add DT bindings for PCI dra7xx EP mode PCI: dwc: dra7xx: Add EP mode support PCI: dwc: dra7xx: Facilitate wrapper and MSI interrupts to be enabled independently dt-bindings: PCI: Add DT bindings for PCI designware EP mode PCI: dwc: designware: Add EP mode support Documentation: PCI: Add binding documentation for pci-test endpoint function ixgbe: Use pcie_flr() instead of duplicating it IB/hfi1: Use pcie_flr() instead of duplicating it PCI: imx6: Fix spelling mistake: "contol" -> "control" ...
2017-04-20MIPS: PCI: Use generic pci_mmap_resource_range()David Woodhouse1-25/+0
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2017-04-20PCI: Add BAR index argument to pci_mmap_page_range()David Woodhouse1-1/+2
In all cases we know which BAR it is. Passing it in means that arch code (or generic code; watch this space) won't have to go looking for it again. Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2017-04-13MIPS: PCI: add controllers before the specified headMathias Kresin1-1/+1
With commit 23dac14d058f ("MIPS: PCI: Use struct list_head lists") new controllers are added after the specified head where they where added before the specified head previously. Use list_add_tail to restore the former order. This patches fixes the following PCI error on lantiq: pci 0000:01:00.0: BAR 0: error updating (0x1c000004 != 0x000000) Fixes: 23dac14d058f ("MIPS: PCI: Use struct list_head lists") Signed-off-by: Mathias Kresin <dev@kresin.me> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/15808/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-04-10MIPS: Octeon: Remove unused SLI types and macros.Steven J. Hill1-2/+2
Remove all unused bitfields and macros. Convert the remaining bitfields to use __BITFIELD_FIELD instead of #ifdef. [ralf@linux-mips.org: Add inclusions of <uapi/asm/bitfield.h> as necessary.] Signed-off-by: Steven J. Hill <steven.hill@cavium.com> Acked-by: David Daney <david.daney@cavium.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/15405/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-02-25Merge tag 'for-next-dma_ops' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma Pull rdma DMA mapping updates from Doug Ledford: "Drop IB DMA mapping code and use core DMA code instead. Bart Van Assche noted that the ib DMA mapping code was significantly similar enough to the core DMA mapping code that with a few changes it was possible to remove the IB DMA mapping code entirely and switch the RDMA stack to use the core DMA mapping code. This resulted in a nice set of cleanups, but touched the entire tree and has been kept separate for that reason." * tag 'for-next-dma_ops' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (37 commits) IB/rxe, IB/rdmavt: Use dma_virt_ops instead of duplicating it IB/core: Remove ib_device.dma_device nvme-rdma: Switch from dma_device to dev.parent RDS: net: Switch from dma_device to dev.parent IB/srpt: Modify a debug statement IB/srp: Switch from dma_device to dev.parent IB/iser: Switch from dma_device to dev.parent IB/IPoIB: Switch from dma_device to dev.parent IB/rxe: Switch from dma_device to dev.parent IB/vmw_pvrdma: Switch from dma_device to dev.parent IB/usnic: Switch from dma_device to dev.parent IB/qib: Switch from dma_device to dev.parent IB/qedr: Switch from dma_device to dev.parent IB/ocrdma: Switch from dma_device to dev.parent IB/nes: Remove a superfluous assignment statement IB/mthca: Switch from dma_device to dev.parent IB/mlx5: Switch from dma_device to dev.parent IB/mlx4: Switch from dma_device to dev.parent IB/i40iw: Remove a superfluous assignment statement IB/hns: Switch from dma_device to dev.parent ...
2017-01-24treewide: Move dma_ops from struct dev_archdata into struct deviceBart Van Assche1-1/+1
Some but not all architectures provide set_dma_ops(). Move dma_ops from struct dev_archdata into struct device such that it becomes possible on all architectures to configure dma_ops per device. Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Juergen Gross <jgross@suse.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: linux-arch@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: Russell King <linux@armlinux.org.uk> Cc: x86@kernel.org Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-01-03MIPS: TXx9: Modernize printing of kernel messagesGeert Uytterhoeven3-31/+31
- Convert from printk() to pr_*(), - Add missing continuations, to fix user-visible breakage, - Drop superfluous casts (u64 has been unsigned long long on all architectures for many years). On rbtx4927, this restores the kernel output like: -TX4927 SDRAMC -- - CR0:0000007e00000544 - TR:32800030e +TX4927 SDRAMC -- CR0:0000007e00000544 TR:32800030e and: -PCIC -- PCICLK: -Internal(33.3MHz) - +PCIC -- PCICLK:Internal(33.3MHz) Fixes: 4bcc595ccd80decb ("printk: reinstate KERN_CONT for printing continuation lines") Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Reviewed-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/14646/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-10-06MIPS: Sanitise coherentio semanticsPaul Burton1-1/+2
The coherentio variable has previously been used as a boolean value, indicating whether the user specified that coherent I/O should be enabled or disabled. It failed to take into account the case where the user does not specify any preference, in which case it makes sense that we should default to coherent I/O if the hardware supports it (hw_coherentio is non-zero). Introduce an enum to clarify the 3 different values of coherentio & use it throughout the code, modifying plat_device_is_coherent() & r4k_cache_init() to take into account the default case. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Cc: Paul Burton <paul.burton@imgtec.com> Patchwork: https://patchwork.linux-mips.org/patch/14347/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-10-06MIPS: PCI: Support generic driversPaul Burton2-0/+53
Introduce support for PCI drivers using only functionality provided generically by the PCI subsystem, by adding the minimum arch-provided functions required. The driver this has been developed for & tested with the xilinx-pcie on a MIPS Boston development board. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14346/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-10-06MIPS: PCI: Introduce CONFIG_PCI_DRIVERS_LEGACYPaul Burton1-1/+1
Introduce 2 Kconfig symbols, CONFIG_PCI_DRIVERS_GENERIC & CONFIG_PCI_DRIVERS_LEGACY, which indicate whether the system should be built to for PCI drivers using the MIPS-specific struct pci_controller API (hereafter "legacy" drivers) or more generic drivers using only functionality provided by the PCI core (hereafter "generic" drivers). The Kconfig entries are created such that platforms have to select CONFIG_PCI_DRIVERS_GENERIC if they wish to use it - that is, the default is CONFIG_PCI_DRIVERS_LEGACY so that existing platforms need no modification. The functions declared in pci.h are rearranged with those provided only by pci-legacy.c being guarded by an #ifdef CONFIG_PCI_DRIVERS_LEGACY to ensure they are only used in configurations where they are implemented. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14345/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-10-06MIPS: PCI: Split pci.c into pci.c & pci-legacy.cPaul Burton3-284/+306
Split out the parts of pci.c that are used by existing systems with MIPS-style PCI drivers but that will not be used by systems with more generic PCI drivers such as pcie-xilinx. This is done in preparation for allowing configurations where the code moved to pci-legacy.c is not built. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Cc: Paul Burton <paul.burton@imgtec.com> Patchwork: https://patchwork.linux-mips.org/patch/14344/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-10-06MIPS: PCI: Inline pcibios_assign_all_bussesPaul Burton1-5/+0
The MIPS implementation of pcibios_assign_all_busses trivially returns 1. Implement it as a static function in asm/pci.h such that the compiler can inline it & optimise out never-taken paths. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14343/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-10-06MIPS: PCI: Make pcibios_set_cache_line_size an initcallPaul Burton1-3/+3
In preparation for allowing configurations in which pcibios_init is not included, make pcibios_set_cache_line_size an initcall. arch_initcall is used such that it runs before the pcibios_init subsys_initcall for platforms that continue to use it. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14342/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-10-06MIPS: PCI: Support for CONFIG_PCI_DOMAINS_GENERICPaul Burton1-2/+2
Introduce support for CONFIG_PCI_DOMAINS_GENERIC, allowing for platforms to make use of generic PCI domains instead of the MIPS-specific implementation. The set_pci_need_domain_info function is introduced to abstract away the removed need_domain_info field in struct pci_controller, and pcibios_scanbus is adjusted to use the pci_domain_nr accessor instead of directly accessing the index field. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14341/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-10-06MIPS: PCI: Use struct list_head listsPaul Burton1-5/+4
Rather than open-coding a linked list implementation, make use of the one in linux/list.h. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14340/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-10-05MIPS: pci: Audit and remove any unnecessary uses of module.hPaul Gortmaker7-11/+3
Historically a lot of these existed because we did not have a distinction between what was modular code and what was providing support to modules via EXPORT_SYMBOL and friends. That changed when we forked out support for the latter into the export.h file. This means we should be able to reduce the usage of module.h in code that is obj-y Makefile or bool Kconfig. The advantage in doing so is that module.h itself sources about 15 other headers; adding significantly to what we feed cpp, and it can obscure what headers we are effectively using. Since module.h was the source for init.h (for __init) and for export.h (for EXPORT_SYMBOL) we consider each obj-y/bool instance for the presence of either and replace as needed. We also needed to remove the no-op MODULE_DEVICE_TABLE usage in several instances to permit removal of the module.h include. The files in these instances were all controlled by bool Kconfig. In one instance, module_param was being used so we transition the module.h include onto a moduleparam.h include. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14035/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-10-04MIPS: Octeon: Fix PCI interrupt routing on D-Link DSR-500N.Aaro Koskinen1-0/+2
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: devicetree@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/14250/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-10-04MIPS: pci-mt7620: Delete unnecessary assignment for the field "owner"Markus Elfring1-1/+0
The field "owner" is set by the core. Thus delete an unneeded initialisation. Generated by: scripts/coccinelle/api/platform_no_drv_owner.cocci Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Cc: John Crispin <john@phrozen.org> Cc: Matthias Brugger <matthias.bgg@gmail.com> Cc: Julia Lawall <julia.lawall@lip6.fr> Cc: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-mediatek@lists.infradead.org Cc: linux-mips@linux-mips.org Cc: LKML <linux-kernel@vger.kernel.org> Cc: kernel-janitors@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/13929/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-06-23MIPS/PCI: Claim bus resources on PCI_PROBE_ONLY set-upsBjorn Helgaas1-1/+8
We claim PCI BAR and bridge window resources in pci_bus_assign_resources(), but when PCI_PROBE_ONLY is set, we treat those resources as immutable and don't call pci_bus_assign_resources(), so the resources aren't put in the resource tree. When the resources aren't in the tree, they don't show up in /proc/iomem, we can't detect conflicts, and we need special cases elsewhere for PCI_PROBE_ONLY or resources without a parent pointer. Claim all PCI BAR and window resources in the PCI_PROBE_ONLY case. If a PCI_PROBE_ONLY platform assigns conflicting resources, Linux can't fix the conflicts. Previously we didn't notice the conflicts, but now we will, which may expose new failures. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-06-17PCI: Unify pci_resource_to_user() declarationsBjorn Helgaas1-0/+10
Replace the pci_resource_to_user() declarations in each arch that defines HAVE_ARCH_PCI_RESOURCE_TO_USER with a single one in linux/pci.h. Change the MIPS static inline implementation to a non-inline version so the static inline doesn't conflict with the new non-static linux/pci.h declaration. No functional change intended. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-05-28MIPS: IP27: Fix typoAndrea Gelmini1-2/+2
Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net> Cc: trivial@kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13320/ Patchwork: https://patchwork.linux-mips.org/patch/13335/ Patchwork: https://patchwork.linux-mips.org/patch/13336/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: Add & use CP0_EntryHi ASID definitionsJames Hogan1-1/+1
Add definitions for the ASID field in CP0_EntryHi (along with the soon to be used ASIDX field), and use them in a few previously hardcoded cases. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Manuel Lauss <manuel.lauss@gmail.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/13205/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: Change my email addressJohn Crispin6-6/+6
The old address is no longer valid. Use the my new one instead. Signed-off-by: John Crispin <john@phrozen.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13201/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: make PCI_DMA_BUS_IS_PHYS=1 constantSergey Ryazanov2-4/+0
No one of supported MIPS machines has an IOMMU unit, so we can safely define PCI_DMA_BUS_IS_PHYS = 1. Also remove iommu flag from the pci controller structure, since it is useless. Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com> Cc: Linux MIPS <linux-mips@linux-mips.org> Patchwork: https://patchwork.linux-mips.org/patch/7604/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-03-16Merge tag 'pci-v4.6-changes' of ↵Linus Torvalds1-7/+12
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: "PCI changes for v4.6: Enumeration: - Disable IO/MEM decoding for devices with non-compliant BARs (Bjorn Helgaas) - Mark Broadwell-EP Home Agent & PCU as having non-compliant BARs (Bjorn Helgaas Resource management: - Mark shadow copy of VGA ROM as IORESOURCE_PCI_FIXED (Bjorn Helgaas) - Don't assign or reassign immutable resources (Bjorn Helgaas) - Don't enable/disable ROM BAR if we're using a RAM shadow copy (Bjorn Helgaas) - Set ROM shadow location in arch code, not in PCI core (Bjorn Helgaas) - Remove arch-specific IORESOURCE_ROM_SHADOW size from sysfs (Bjorn Helgaas) - ia64: Use ioremap() instead of open-coded equivalent (Bjorn Helgaas) - ia64: Keep CPU physical (not virtual) addresses in shadow ROM resource (Bjorn Helgaas) - MIPS: Keep CPU physical (not virtual) addresses in shadow ROM resource (Bjorn Helgaas) - Remove unused IORESOURCE_ROM_COPY and IORESOURCE_ROM_BIOS_COPY (Bjorn Helgaas) - Don't leak memory if sysfs_create_bin_file() fails (Bjorn Helgaas) - rcar: Remove PCI_PROBE_ONLY handling (Lorenzo Pieralisi) - designware: Remove PCI_PROBE_ONLY handling (Lorenzo Pieralisi) Virtualization: - Wait for up to 1000ms after FLR reset (Alex Williamson) - Support SR-IOV on any function type (Kelly Zytaruk) - Add ACS quirk for all Cavium devices (Manish Jaggi) AER: - Rename pci_ops_aer to aer_inj_pci_ops (Bjorn Helgaas) - Restore pci_ops pointer while calling original pci_ops (David Daney) - Fix aer_inject error codes (Jean Delvare) - Use dev_warn() in aer_inject (Jean Delvare) - Log actual error causes in aer_inject (Jean Delvare) - Log aer_inject error injections (Jean Delvare) VPD: - Prevent VPD access for buggy devices (Babu Moger) - Move pci_read_vpd() and pci_write_vpd() close to other VPD code (Bjorn Helgaas) - Move pci_vpd_release() from header file to pci/access.c (Bjorn Helgaas) - Remove struct pci_vpd_ops.release function pointer (Bjorn Helgaas) - Rename VPD symbols to remove unnecessary "pci22" (Bjorn Helgaas) - Fold struct pci_vpd_pci22 into struct pci_vpd (Bjorn Helgaas) - Sleep rather than busy-wait for VPD access completion (Bjorn Helgaas) - Update VPD definitions (Hannes Reinecke) - Allow access to VPD attributes with size 0 (Hannes Reinecke) - Determine actual VPD size on first access (Hannes Reinecke) Generic host bridge driver: - Move structure definitions to separate header file (David Daney) - Add pci_host_common_probe(), based on gen_pci_probe() (David Daney) - Expose pci_host_common_probe() for use by other drivers (David Daney) Altera host bridge driver: - Fix altera_pcie_link_is_up() (Ley Foon Tan) Cavium ThunderX host bridge driver: - Add PCIe host driver for ThunderX processors (David Daney) - Add driver for ThunderX-pass{1,2} on-chip devices (David Daney) Freescale i.MX6 host bridge driver: - Add DT bindings to configure PHY Tx driver settings (Justin Waters) - Move imx6_pcie_reset_phy() near other PHY handling functions (Lucas Stach) - Move PHY reset into imx6_pcie_establish_link() (Lucas Stach) - Remove broken Gen2 workaround (Lucas Stach) - Move link up check into imx6_pcie_wait_for_link() (Lucas Stach) Freescale Layerscape host bridge driver: - Add "fsl,ls2085a-pcie" compatible ID (Yang Shi) Intel VMD host bridge driver: - Attach VMD resources to parent domain's resource tree (Jon Derrick) - Set bus resource start to 0 (Keith Busch) Microsoft Hyper-V host bridge driver: - Add fwnode_handle to x86 pci_sysdata (Jake Oshins) - Look up IRQ domain by fwnode_handle (Jake Oshins) - Add paravirtual PCI front-end for Microsoft Hyper-V VMs (Jake Oshins) NVIDIA Tegra host bridge driver: - Add pci_ops.{add,remove}_bus() callbacks (Thierry Reding) - Implement ->{add,remove}_bus() callbacks (Thierry Reding) - Remove unused struct tegra_pcie.num_ports field (Thierry Reding) - Track bus -> CPU mapping (Thierry Reding) - Remove misleading PHYS_OFFSET (Thierry Reding) Renesas R-Car host bridge driver: - Depend on ARCH_RENESAS, not ARCH_SHMOBILE (Simon Horman) Synopsys DesignWare host bridge driver: - ARC: Add PCI support (Joao Pinto) - Add generic dw_pcie_wait_for_link() (Joao Pinto) - Add default link up check if sub-driver doesn't override (Joao Pinto) - Add driver for prototyping kits based on ARC SDP (Joao Pinto) TI Keystone host bridge driver: - Defer probing if devm_phy_get() returns -EPROBE_DEFER (Shawn Lin) Xilinx AXI host bridge driver: - Use of_pci_get_host_bridge_resources() to parse DT (Bharat Kumar Gogada) - Remove dependency on ARM-specific struct hw_pci (Bharat Kumar Gogada) - Don't call pci_fixup_irqs() on Microblaze (Bharat Kumar Gogada) - Update Zynq binding with Microblaze node (Bharat Kumar Gogada) - microblaze: Support generic Xilinx AXI PCIe Host Bridge IP driver (Bharat Kumar Gogada) Xilinx NWL host bridge driver: - Add support for Xilinx NWL PCIe Host Controller (Bharat Kumar Gogada) Miscellaneous: - Check device_attach() return value always (Bjorn Helgaas) - Move pci_set_flags() from asm-generic/pci-bridge.h to linux/pci.h (Bjorn Helgaas) - Remove includes of empty asm-generic/pci-bridge.h (Bjorn Helgaas) - ARM64: Remove generated include of asm-generic/pci-bridge.h (Bjorn Helgaas) - Remove empty asm-generic/pci-bridge.h (Bjorn Helgaas) - Remove includes of asm/pci-bridge.h (Bjorn Helgaas) - Consolidate PCI DMA constants and interfaces in linux/pci-dma-compat.h (Bjorn Helgaas) - unicore32: Remove unused HAVE_ARCH_PCI_SET_DMA_MASK definition (Bjorn Helgaas) - Cleanup pci/pcie/Kconfig whitespace (Andreas Ziegler) - Include pci/hotplug Kconfig directly from pci/Kconfig (Bjorn Helgaas) - Include pci/pcie/Kconfig directly from pci/Kconfig (Bogicevic Sasa) - frv: Remove stray pci_{alloc,free}_consistent() declaration (Christoph Hellwig) - Move pci_dma_* helpers to common code (Christoph Hellwig) - Add PCI_CLASS_SERIAL_USB_DEVICE definition (Heikki Krogerus) - Add QEMU top-level IDs for (sub)vendor & device (Robin H. Johnson) - Fix broken URL for Dell biosdevname (Naga Venkata Sai Indubhaskar Jupudi)" * tag 'pci-v4.6-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (94 commits) PCI: Add PCI_CLASS_SERIAL_USB_DEVICE definition PCI: designware: Add driver for prototyping kits based on ARC SDP PCI: designware: Add default link up check if sub-driver doesn't override PCI: designware: Add generic dw_pcie_wait_for_link() PCI: Cleanup pci/pcie/Kconfig whitespace PCI: Simplify pci_create_attr() control flow PCI: Don't leak memory if sysfs_create_bin_file() fails PCI: Simplify sysfs ROM cleanup PCI: Remove unused IORESOURCE_ROM_COPY and IORESOURCE_ROM_BIOS_COPY MIPS: Loongson 3: Keep CPU physical (not virtual) addresses in shadow ROM resource MIPS: Loongson 3: Use temporary struct resource * to avoid repetition ia64/PCI: Keep CPU physical (not virtual) addresses in shadow ROM resource ia64/PCI: Use ioremap() instead of open-coded equivalent ia64/PCI: Use temporary struct resource * to avoid repetition PCI: Clean up pci_map_rom() whitespace PCI: Remove arch-specific IORESOURCE_ROM_SHADOW size from sysfs PCI: thunder: Add driver for ThunderX-pass{1,2} on-chip devices PCI: thunder: Add PCIe host driver for ThunderX processors PCI: generic: Expose pci_host_common_probe() for use by other drivers PCI: generic: Add pci_host_common_probe(), based on gen_pci_probe() ...
2016-03-12MIPS: Loongson 3: Keep CPU physical (not virtual) addresses in shadow ROM ↵Bjorn Helgaas1-2/+7
resource Loongson 3 used the IORESOURCE_ROM_COPY flag for its ROM resource. There are two problems with this: - When IORESOURCE_ROM_COPY is set, pci_map_rom() assumes the resource contains virtual addresses, so it doesn't ioremap the resource. This implies loongson_sysconf.vgabios_addr is a virtual address. That's a problem because resources should contain CPU *physical* addresses not virtual addresses. - When IORESOURCE_ROM_COPY is set, pci_cleanup_rom() calls kfree() on the resource. We did not kmalloc() the loongson_sysconf.vgabios_addr area, so it is incorrect to kfree() it. If we're using a shadow copy in RAM for the Loongson 3 VGA BIOS area, disable the ROM BAR and release the address space it was consuming. Use IORESOURCE_ROM_SHADOW instead of IORESOURCE_ROM_COPY. This means the struct resource contains CPU physical addresses, and pci_map_rom() will ioremap() it as needed. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-03-12MIPS: Loongson 3: Use temporary struct resource * to avoid repetitionBjorn Helgaas1-7/+7
Use a temporary struct resource pointer to avoid needless repetition of "pdev->resource[PCI_ROM_RESOURCE]". No functional change intended. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-02-10MIPS: pci-mt7620: Fix return value check in mt7620_pci_probe()Wei Yongjun1-4/+4
In case of error, the function devm_ioremap_resource() returns ERR_PTR() and never returns NULL. The NULL test in the return value check should be replaced with IS_ERR(). Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Acked-by: John Crispin <blogic@openwrt.org> Cc: Matthias Brugger <matthias.bgg@gmail.com> Cc: linux-mips@linux-mips.org Cc: linux-mediatek@lists.infradead.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/12451/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-01-20MIPS: pci: Add MT7620a PCIE driverJohn Crispin2-0/+427
The "a" version of the MT7620 has single port PCIE bus. The driver is straightforward without any special magic required. The driver works on MT7620 and MT7628. There are a few magic values that get written to the pcie phy and a register of which we only know the name. I marked these places as vodoo in the comments above the code. Signed-off-by: John Crispin <blogic@openwrt.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/11996/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-12-22MIPS: Fix build error due to unused variables.Ralf Baechle1-1/+0
c861519fcf95b2d46cb4275903423b43ae150a40 ("MIPS: Fix delay loops which may be removed by GCC.") which made it upstream was an outdated version of the patch and is lacking some the removal of two variables that became unused thus resulting in further warnings and build breakage. The commit from ae878615d7cee5d7346946cf1ae1b60e427013c2 was correct however. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-11-27MIPS: Fix delay loops which may be removed by GCC.Ralf Baechle1-2/+2
GCC 4.1 and newer remove empty loops. This becomes a problem when delay loops get removed. Fixed by rewriting to user the proper Linux interface for such delays. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Reported-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Acked-by: John Crispin <blogic@openwrt.org>
2015-11-11MIPS: pci-rt3883: drop unneeded of_node_getJulia Lawall1-4/+2
for_each_child_of_node performs an of_node_get on each iteration, so no of_node_get is needed on breaking out of the loop when the device_node structure is saved in another variable. A simplified semantic match that finds this problem is as follows (http://coccinelle.lip6.fr): // <smpl> @@ expression root; local idexpression child; @@ for_each_child_of_node(root, child) { ... * of_node_get(child) ... break; } // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Cc: kernel-janitors@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: Russell King - ARM Linux <linux@arm.linux.org.uk> Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Jason Cooper <jason@lakedaemon.net> Patchwork: https://patchwork.linux-mips.org/patch/11357/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-09-25Merge tag 'pci-v4.3-fixes-1' of ↵Linus Torvalds1-0/+6
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI fixes from Bjorn Helgaas: "These are fixes for things we merged for v4.3 (VPD, MSI, and bridge window management), and a new Renesas R8A7794 SoC device ID. Details: Resource management: - Revert pci_read_bridge_bases() unification (Bjorn Helgaas) - Clear IORESOURCE_UNSET when clipping a bridge window (Bjorn Helgaas) MSI: - Fix MSI IRQ domains for VFs on virtual buses (Alex Williamson) Renesas R-Car host bridge driver: - Add R8A7794 support (Sergei Shtylyov) Miscellaneous: - Fix devfn for VPD access through function 0 (Alex Williamson) - Use function 0 VPD only for identical functions (Alex Williamson)" * tag 'pci-v4.3-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: PCI: rcar: Add R8A7794 support PCI: Use function 0 VPD for identical functions, regular VPD for others PCI: Fix devfn for VPD access through function 0 PCI/MSI: Fix MSI IRQ domains for VFs on virtual buses PCI: Clear IORESOURCE_UNSET when clipping a bridge window PCI: Revert "PCI: Call pci_read_bridge_bases() from core instead of arch code"
2015-09-16genirq: Remove irq argument from irq flow handlersThomas Gleixner4-4/+4
Most interrupt flow handlers do not use the irq argument. Those few which use it can retrieve the irq number from the irq descriptor. Remove the argument. Search and replace was done with coccinelle and some extra helper scripts around it. Thanks to Julia for her help! Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Julia Lawall <Julia.Lawall@lip6.fr> Cc: Jiang Liu <jiang.liu@linux.intel.com>
2015-09-15PCI: Revert "PCI: Call pci_read_bridge_bases() from core instead of arch code"Bjorn Helgaas1-0/+6
Revert dff22d2054b5 ("PCI: Call pci_read_bridge_bases() from core instead of arch code"). Reading PCI bridge windows is not arch-specific in itself, but there is PCI core code that doesn't work correctly if we read them too early. For example, Hannes found this case on an ARM Freescale i.mx6 board: pci_bus 0000:00: root bus resource [mem 0x01000000-0x01efffff] pci 0000:00:00.0: PCI bridge to [bus 01-ff] pci 0000:00:00.0: BAR 8: no space for [mem size 0x01000000] (mem window) pci 0000:01:00.0: BAR 2: failed to assign [mem size 0x00200000] pci 0000:01:00.0: BAR 1: failed to assign [mem size 0x00004000] pci 0000:01:00.0: BAR 0: failed to assign [mem size 0x00000100] The 00:00.0 mem window needs to be at least 3MB: the 01:00.0 device needs 0x204100 of space, and mem windows are megabyte-aligned. Bus sizing can increase a bridge window size, but never *decrease* it (see d65245c3297a ("PCI: don't shrink bridge resources")). Prior to dff22d2054b5, ARM didn't read bridge windows at all, so the "original size" was zero, and we assigned a 3MB window. After dff22d2054b5, we read the bridge windows before sizing the bus. The firmware programmed a 16MB window (size 0x01000000) in 00:00.0, and since we never decrease the size, we kept 16MB even though we only needed 3MB. But 16MB doesn't fit in the host bridge aperture, so we failed to assign space for the window and the downstream devices. I think this is a defect in the PCI core: we shouldn't rely on the firmware to assign sensible windows. Ray reported a similar problem, also on ARM, with Broadcom iProc. Issues like this are too hard to fix right now, so revert dff22d2054b5. Reported-by: Hannes <oe5hpm@gmail.com> Reported-by: Ray Jui <rjui@broadcom.com> Link: http://lkml.kernel.org/r/CAAa04yFQEUJm7Jj1qMT57-LG7ZGtnhNDBe=PpSRa70Mj+XhW-A@mail.gmail.com Link: http://lkml.kernel.org/r/55F75BB8.4070405@broadcom.com Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Yinghai Lu <yinghai@kernel.org> Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2015-09-03Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds6-23/+19
Pull MIPS updates from Ralf Baechle: "This is the main pull request for 4.3 for MIPS. Here's the summary: Three fixes that didn't make 4.2-stable: - a -Os build might compile the kernel using the MIPS16 instruction set but the R2 optimized inline functions in <uapi/asm/swab.h> are implemented using 32-bit wide instructions which is invalid. - a build error in pgtable-bits.h for a particular kernel configuration. - accessing registers of the CM GCR might have been compiled to use 64 bit accesses but these registers are onl 32 bit wide. And also a few new bits: - move the ATH79 GPIO driver to drivers/gpio - the definition of IRQCHIP_DECLARE has moved to linux/irqchip.h, change ATH79 accordingly. - fix definition of pgprot_writecombine - add an implementation of dma_map_ops.mmap - fix alignment of quiet build output for vmlinuz link - BCM47xx: Use kmemdup rather than duplicating its implementation - Netlogic: Fix 0x0x prefixes of constants. - merge Bjorn Helgaas' series to remove most of the weak keywords from function declarations. - CP0 and CP1 registers are best considered treated as unsigned values to avoid large values from becoming negative values. - improve support for the MIPS GIC timer. - enable common clock framework for Malta and SEAD3. - a number of improvments and fixes to dump_tlb(). - document the MIPS TLB dump functionality in Magic SysRq. - Cavium Octeon CN68XX improvments. - NetLogic improvments. - irq: Use access helper irq_data_get_affinity_mask. - handle MSA unaligned accesses. - a number of R6-related math-emu fixes. - support for I6400. - improvments to MSA support. - add uprobes support. - move from deprecated __initcall to arch_initcall. - remove finish_arch_switch(). - IRQ cleanups by Thomas Gleixner. - migrate to new 'set-state' interface. - random small cleanups" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (148 commits) MIPS: UAPI: Fix unrecognized opcode WSBH/DSBH/DSHD when using MIPS16. MIPS: Fix alignment of quiet build output for vmlinuz link MIPS: math-emu: Remove unused handle_dsemul function declaration MIPS: math-emu: Add support for the MIPS R6 MAX{, A} FPU instruction MIPS: math-emu: Add support for the MIPS R6 MIN{, A} FPU instruction MIPS: math-emu: Add support for the MIPS R6 CLASS FPU instruction MIPS: math-emu: Add support for the MIPS R6 RINT FPU instruction MIPS: math-emu: Add support for the MIPS R6 MSUBF FPU instruction MIPS: math-emu: Add support for the MIPS R6 MADDF FPU instruction MIPS: math-emu: Add support for the MIPS R6 SELNEZ FPU instruction MIPS: math-emu: Add support for the MIPS R6 SELEQZ FPU instruction MIPS: math-emu: Add support for the CMP.condn.fmt R6 instruction MIPS: inst.h: Add new MIPS R6 FPU opcodes MIPS: Octeon: Fix management port MII address on Kontron S1901 MIPS: BCM47xx: Use kmemdup rather than duplicating its implementation STAGING: Octeon: Use common helpers for determining interface and port MIPS: Octeon: Support interfaces 4 and 5 MIPS: Octeon: Set up 1:1 mapping between CN68XX PKO queues and ports MIPS: Octeon: Initialize CN68XX PKO STAGING: Octeon: Support CN68XX style WQE ...
2015-09-03MIPS: Netlogic: Use chip_data for irq_chip methodsKamlakant Patel1-10/+10
Update mips/netlogic/common/irq.c and mips/pci/msi-xlp.c to use chip_data to store interrupt controller data pointer. It uses handler_data now, and that causes errors when an API (like the GPIO subsystem) tries to use the handler data. Signed-off-by: Kamlakant Patel <kamlakant.patel@broadcom.com> Signed-off-by: Jayachandran C <jchandra@broadcom.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/10817/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-09-03MIPS: Remove all the uses of custom gpio.hAlban Bedel1-1/+0
Currently CONFIG_ARCH_HAVE_CUSTOM_GPIO_H is defined for all MIPS machines, and each machine type provides its own gpio.h. However only a handful really implement the GPIO API, most just forward everythings to gpiolib. The Alchemy machine is notable as it provides a system to allow implementing the GPIO API at the board level. But it is not used by any board currently supported, so it can also be removed. For most machine types we can just remove the custom gpio.h, as well as the custom wrappers if some exists. Some of the code found in the wrappers must be moved to the respective GPIO driver. A few more fixes are need in some drivers as they rely on linux/gpio.h to provides some machine specific definitions, or used asm/gpio.h instead of linux/gpio.h for the gpio API. Signed-off-by: Alban Bedel <albeu@free.fr> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Cc: linux-mips@linux-mips.org Cc: Hauke Mehrtens <hauke@hauke-m.de> Cc: Rafał Miłecki <zajec5@gmail.com> Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Cc: Tejun Heo <tj@kernel.org> Cc: Alexandre Courbot <gnurou@gmail.com> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Florian Fainelli <florian@openwrt.org> Cc: Manuel Lauss <manuel.lauss@gmail.com> Cc: Joe Perches <joe@perches.com> Cc: Daniel Walter <dwalter@google.com> Cc: Sergey Ryazanov <ryazanov.s.a@gmail.com> Cc: Huacai Chen <chenhc@lemote.com> Cc: James Hartley <james.hartley@imgtec.com> Cc: Andrew Bresticker <abrestic@chromium.org> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Wolfram Sang <wsa@the-dreams.de> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Varka Bhadram <varkabhadram@gmail.com> Cc: Masanari Iida <standby24x7@gmail.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Michael Buesch <m@bues.ch> Cc: abdoulaye berthe <berthe.ab@gmail.com> Cc: linux-kernel@vger.kernel.org Cc: linux-ide@vger.kernel.org Cc: linux-gpio@vger.kernel.org Cc: linux-input@vger.kernel.org Cc: netdev@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/10828/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-09-01Merge branch 'irq-core-for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq updates from Thomas Gleixner: "This updated pull request does not contain the last few GIC related patches which were reported to cause a regression. There is a fix available, but I let it breed for a couple of days first. The irq departement provides: - new infrastructure to support non PCI based MSI interrupts - a couple of new irq chip drivers - the usual pile of fixlets and updates to irq chip drivers - preparatory changes for removal of the irq argument from interrupt flow handlers - preparatory changes to remove IRQF_VALID" * 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (129 commits) irqchip/imx-gpcv2: IMX GPCv2 driver for wakeup sources irqchip: Add bcm2836 interrupt controller for Raspberry Pi 2 irqchip: Add documentation for the bcm2836 interrupt controller irqchip/bcm2835: Add support for being used as a second level controller irqchip/bcm2835: Refactor handle_IRQ() calls out of MAKE_HWIRQ PCI: xilinx: Fix typo in function name irqchip/gic: Ensure gic_cpu_if_up/down() programs correct GIC instance irqchip/gic: Only allow the primary GIC to set the CPU map PCI/MSI: pci-xgene-msi: Consolidate chained IRQ handler install/remove unicore32/irq: Prepare puv3_gpio_handler for irq argument removal tile/pci_gx: Prepare trio_handle_level_irq for irq argument removal m68k/irq: Prepare irq handlers for irq argument removal C6X/megamode-pic: Prepare megamod_irq_cascade for irq argument removal blackfin: Prepare irq handlers for irq argument removal arc/irq: Prepare idu_cascade_isr for irq argument removal sparc/irq: Use access helper irq_data_get_affinity_mask() sparc/irq: Use helper irq_data_get_irq_handler_data() parisc/irq: Use access helper irq_data_get_affinity_mask() mn10300/irq: Use access helper irq_data_get_affinity_mask() irqchip/i8259: Prepare i8259_irq_dispatch for irq argument removal ...
2015-08-26MIPS: ops-emma2rh: Drop nonsensical db_assertPaul Burton1-4/+2
The db_assert call checks whether the bus_num pointer is non-NULL, but does so after said pointer has been dereferenced by the assignment on the previous line. Thus the check is pointless & likely to have been optimised out by the compiler anyway. The check_args function is static & only ever called from the local file with bus_num being a pointer to an on-stack variable, so the check seems somewhat overzealous anyway. Simply remove it. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/10692/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-08-26MIPS: rt3883: Prepare rt3883_pci_irq_handler for irq argument removalThomas Gleixner1-2/+2
The irq argument of most interrupt flow handlers is unused or merily used instead of a local variable. The handlers which need the irq argument can retrieve the irq number from the irq descriptor. Search and update was done with coccinelle and the invaluable help of Julia Lawall. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Julia Lawall <Julia.Lawall@lip6.fr> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: linux-mips@linux-mips.org Cc: LKML <linux-kernel@vger.kernel.org> Patchwork: https://patchwork.linux-mips.org/patch/10706/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-08-26MIPS: pci-rt3883: Consolidate chained IRQ handler install/removeThomas Gleixner1-2/+1
Chained irq handlers usually set up handler data as well. We now have a function to set both under irq_desc->lock. Replace the two calls with one. Search and conversion was done with coccinelle. Reported-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Julia Lawall <Julia.Lawall@lip6.fr> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Cc: LKML <linux-kernel@vger.kernel.org> Cc: Jiang Liu <jiang.liu@linux.intel.com> Patchwork: https://patchwork.linux-mips.org/patch/10698/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-08-26MIPS: pci-ar724x: Consolidate chained IRQ handler install/removeThomas Gleixner1-2/+2
Chained irq handlers usually set up handler data as well. We now have a function to set both under irq_desc->lock. Replace the two calls with one. Search and conversion was done with coccinelle. Reported-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Julia Lawall <Julia.Lawall@lip6.fr> Cc: linux-mips@linux-mips.org Cc: LKML <linux-kernel@vger.kernel.org> Cc: Jiang Liu <jiang.liu@linux.intel.com> Patchwork: https://patchwork.linux-mips.org/patch/10697/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-08-26MIPS: pci-ar71xx: Consolidate chained IRQ handler install/removeThomas Gleixner1-2/+2
Chained irq handlers usually set up handler data as well. We now have a function to set both under irq_desc->lock. Replace the two calls with one. Search and conversion was done with coccinelle. Reported-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Julia Lawall <Julia.Lawall@lip6.fr> Cc: linux-mips@linux-mips.org Cc: LKML <linux-kernel@vger.kernel.org> Cc: Jiang Liu <jiang.liu@linux.intel.com> Patchwork: https://patchwork.linux-mips.org/patch/10696/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-07-23PCI: Call pci_read_bridge_bases() from core instead of arch codeLorenzo Pieralisi1-6/+0
When we scan a PCI bus, we read PCI-PCI bridge window registers with pci_read_bridge_bases() so we can validate the resource hierarchy. Most architectures call pci_read_bridge_bases() from pcibios_fixup_bus(), but PCI-PCI bridges are not arch-specific, so this doesn't need to be in arch-specific code. Call pci_read_bridge_bases() directly from the PCI core instead of from arch code. For alpha and mips, we now call pci_read_bridge_bases() always; previously we only called it if PCI_PROBE_ONLY was set. [bhelgaas: changelog] Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: Ralf Baechle <ralf@linux-mips.org> CC: James E.J. Bottomley <jejb@parisc-linux.org> CC: Michael Ellerman <mpe@ellerman.id.au> CC: Bjorn Helgaas <bhelgaas@google.com> CC: Richard Henderson <rth@twiddle.net> CC: Benjamin Herrenschmidt <benh@kernel.crashing.org> CC: David Howells <dhowells@redhat.com> CC: Russell King <linux@arm.linux.org.uk> CC: Tony Luck <tony.luck@intel.com> CC: David S. Miller <davem@davemloft.net> CC: Ingo Molnar <mingo@redhat.com> CC: Guenter Roeck <linux@roeck-us.net> CC: Michal Simek <monstr@monstr.eu> CC: Chris Zankel <chris@zankel.net>
2015-07-22MIPS/PCI: Use for_pci_msi_entry() to access MSI device listJiang Liu1-1/+1
Use accessor for_each_pci_msi_entry() to access MSI device list, so we could easily move msi_list from struct pci_dev into struct device later. Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Cc: Tony Luck <tony.luck@intel.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-mips@linux-mips.org Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Grant Likely <grant.likely@linaro.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Stuart Yoder <stuart.yoder@freescale.com> Cc: Yijing Wang <wangyijing@huawei.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Ralf Baechle <ralf@linux-mips.org> Link: http://lkml.kernel.org/r/1436428847-8886-3-git-send-email-jiang.liu@linux.intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-07-01Merge branch 'irq-urgent-for-linus' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fixes from Thomas Gleixner: "This contains: - a series of fixes for interrupt drivers to prevent a potential race when installing a chained interrupt handler - a fix for cpumask pointer misuse - a fix for using the wrong interrupt number from struct irq_data - removal of unused code and outdated comments - a few new helper functions which allow us to cleanup the interrupt handling code further in 4.3 I decided against doing the cleanup at the end of this merge window and rather do the preparatory steps for 4.3, so we can run the final ABI change at the end of the 4.3 merge window with less risk" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (26 commits) ARM/LPC32xx: Use irq not hwirq for __irq_set_handler_locked() genirq: Implement irq_set_handler_locked()/irq_set_chip_handler_name_locked() genirq: Introduce helper irq_desc_get_irq() genirq: Remove irq_node() genirq: Clean up outdated comments related to include/linux/irqdesc.h mn10300: Fix incorrect use of irq_data->affinity MIPS/ralink: Fix race in installing chained IRQ handler MIPS/pci: Fix race in installing chained IRQ handler MIPS/ath25: Fix race in installing chained IRQ handler MIPS/ath25: Fix race in installing chained IRQ handler m68k/psc: Fix race in installing chained IRQ handler avr32/at32ap: Fix race in installing chained IRQ handler sh/intc: Fix race in installing chained IRQ handler sh/intc: Fix potential race in installing chained IRQ handler pinctrl/sun4i: Fix race in installing chained IRQ handler pinctrl/samsung: Fix race in installing chained IRQ handler pinctrl/samsung: Fix race in installing chained IRQ handler pinctrl/exynos: Fix race in installing chained IRQ handler pinctrl/st: Fix race in installing chained IRQ handler pinctrl/adi2: Fix race in installing chained IRQ handler ...
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-22 03:43:01 +0000