summaryrefslogtreecommitdiffstats
path: root/arch/mips/netlogic
AgeCommit message (Collapse)AuthorFilesLines
2021-04-07mips: netlogic: Use irq_domain_simple_ops for XLP PICMarc Zyngier1-5/+1
Use the generic irq_domain_simple_ops structure instead of a home-grown one. Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Marc Zyngier <maz@kernel.org>
2021-01-07MIPS: Remove empty prom_free_prom_memory functionsThomas Bogendoerfer2-10/+0
Most of the prom_free_prom_memory functions are empty. With a new weak prom_free_prom_memory() we can remove all of them. Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Acked-by: Florian Fainelli <f.fainelli@gmail.com>
2020-10-16Merge tag 'mips_5.10' of ↵Linus Torvalds2-3/+4
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux Pull MIPS updates from Thomas Bogendoerfer: - removed support for PNX833x alias NXT_STB22x - included Ingenic SoC support into generic MIPS kernels - added support for new Ingenic SoCs - converted workaround selection to use Kconfig - replaced old boot mem functions by memblock_* - enabled COP2 usage in kernel for Loongson64 to make use of 16byte load/stores possible - cleanups and fixes * tag 'mips_5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (92 commits) MIPS: DEC: Restore bootmem reservation for firmware working memory area MIPS: dec: fix section mismatch bcm963xx_tag.h: fix duplicated word mips: ralink: enable zboot support MIPS: ingenic: Remove CPU_SUPPORTS_HUGEPAGES MIPS: cpu-probe: remove MIPS_CPU_BP_GHIST option bit MIPS: cpu-probe: introduce exclusive R3k CPU probe MIPS: cpu-probe: move fpu probing/handling into its own file MIPS: replace add_memory_region with memblock MIPS: Loongson64: Clean up numa.c MIPS: Loongson64: Select SMP in Kconfig to avoid build error mips: octeon: Add Ubiquiti E200 and E220 boards MIPS: SGI-IP28: disable use of ll/sc in kernel MIPS: tx49xx: move tx4939_add_memory_regions into only user MIPS: pgtable: Remove used PAGE_USERIO define MIPS: alchemy: Share prom_init implementation MIPS: alchemy: Fix build breakage, if TOUCHSCREEN_WM97XX is disabled MIPS: process: include exec.h header in process.c MIPS: process: Add prototype for function arch_dup_task_struct MIPS: idle: Add prototype for function check_wait ...
2020-10-13memblock: use separate iterators for memory and reserved regionsMike Rapoport1-1/+1
for_each_memblock() is used to iterate over memblock.memory in a few places that use data from memblock_region rather than the memory ranges. Introduce separate for_each_mem_region() and for_each_reserved_mem_region() to improve encapsulation of memblock internals from its users. Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Baoquan He <bhe@redhat.com> Acked-by: Ingo Molnar <mingo@kernel.org> [x86] Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> [MIPS] Acked-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com> [.clang-format] Cc: Andy Lutomirski <luto@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Daniel Axtens <dja@axtens.net> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Emil Renner Berthing <kernel@esmil.dk> Cc: Hari Bathini <hbathini@linux.ibm.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: https://lkml.kernel.org/r/20200818151634.14343-18-rppt@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-10-12MIPS: replace add_memory_region with memblockThomas Bogendoerfer2-3/+4
add_memory_region was the old interface for registering memory and was already changed to used memblock internaly. Replace it by directly calling memblock functions. Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2020-05-13MIPS: Only include the platform file neededThomas Bogendoerfer1-1/+0
Instead of including all Platform files, we simply include the needed one and avoid clashes with makefile variables. Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2020-04-19MIPS: Netlogic: remove unneeded semicolon in fmn_message_handler()Jason Yan1-1/+1
Fix the following coccicheck warning: arch/mips/netlogic/xlr/fmn.c:106:2-3: Unneeded semicolon Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2020-03-05MIPS: Replace setup_irq() by request_irq()afzal mohammed1-8/+3
request_irq() is preferred over setup_irq(). Invocations of setup_irq() occur after memory allocators are ready. Per tglx[1], setup_irq() existed in olden days when allocators were not ready by the time early interrupts were initialized. Hence replace setup_irq() by request_irq(). remove_irq() has been replaced by free_irq() as well. There were build error's during previous version, couple of which was reported by kbuild test robot <lkp@intel.com> of which one was reported by Thomas Bogendoerfer <tsbogend@alpha.franken.de> as well. There were a few more issues including build errors, those also have been fixed. [1] https://lkml.kernel.org/r/alpine.DEB.2.20.1710191609480.1971@nanos Signed-off-by: afzal mohammed <afzal.mohd.ma@gmail.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2019-08-23MIPS: xlp: Drop boot_mem_mapJiaxun Yang1-6/+6
Simply replace with memblock functions. Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Paul Burton <paul.burton@mips.com> Cc: linux-mips@vger.kernel.org Cc: yasha.che3@gmail.com Cc: aurelien@aurel32.net Cc: sfr@canb.auug.org.au Cc: fancer.lancer@gmail.com Cc: matt.redfearn@mips.com Cc: chenhc@lemote.com
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner2-0/+2
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-31mm: remove include/linux/bootmem.hMike Rapoport1-1/+1
Move remaining definitions and declarations from include/linux/bootmem.h into include/linux/memblock.h and remove the redundant header. The includes were replaced with the semantic patch below and then semi-automated removal of duplicated '#include <linux/memblock.h> @@ @@ - #include <linux/bootmem.h> + #include <linux/memblock.h> [sfr@canb.auug.org.au: dma-direct: fix up for the removal of linux/bootmem.h] Link: http://lkml.kernel.org/r/20181002185342.133d1680@canb.auug.org.au [sfr@canb.auug.org.au: powerpc: fix up for removal of linux/bootmem.h] Link: http://lkml.kernel.org/r/20181005161406.73ef8727@canb.auug.org.au [sfr@canb.auug.org.au: x86/kaslr, ACPI/NUMA: fix for linux/bootmem.h removal] Link: http://lkml.kernel.org/r/20181008190341.5e396491@canb.auug.org.au Link: http://lkml.kernel.org/r/1536927045-23536-30-git-send-email-rppt@linux.vnet.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Ingo Molnar <mingo@redhat.com> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Jonas Bonn <jonas@southpole.se> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Ley Foon Tan <lftan@altera.com> Cc: Mark Salter <msalter@redhat.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Serge Semin <fancer.lancer@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-26Merge tag 'mips_4.20' of ↵Linus Torvalds1-7/+7
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux Pull MIPS updates from Paul Burton: - kexec support for the generic MIPS platform when running on a CPU including the MIPS Coherence Manager & related hardware. - Improvements to the definition of memory barriers used around MMIO accesses, and fixes in their use. - Switch to CONFIG_NO_BOOTMEM from Mike Rapoport, finally dropping reliance on the old bootmem code. - A number of fixes & improvements for Loongson 3 systems. - DT & config updates for the Microsemi Ocelot platform. - Workaround to enable USB power on the Netgear WNDR3400v3. - Various cleanups & fixes. * tag 'mips_4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (51 commits) MIPS: Cleanup DSP ASE detection MIPS: dts: Change upper case to lower case MIPS: generic: Add Network, SPI and I2C to ocelot_defconfig MIPS: Loongson-3: Fix BRIDGE irq delivery problem MIPS: Loongson-3: Fix CPU UART irq delivery problem MIPS: Remove unused PREF, PREFE & PREFX macros MIPS: lib: Use kernel_pref & user_pref in memcpy() MIPS: Remove unused CAT macro MIPS: Add kernel_pref & user_pref helpers MIPS: Remove unused TTABLE macro MIPS: Remove unused PIC macros MIPS: Remove unused MOVN & MOVZ macros MIPS: Provide actually relaxed MMIO accessors MIPS: Enforce strong ordering for MMIO accessors MIPS: Correct `mmiowb' barrier for `wbflush' platforms MIPS: Define MMIO ordering barriers MIPS: mscc: add PCB120 to the ocelot fitImage MIPS: mscc: add DT for Ocelot PCB120 MIPS: memset: Limit excessive `noreorder' assembly mode use MIPS: memset: Fix CPU_DADDI_WORKAROUNDS `small_fixup' regression ...
2018-10-03mtd: rawnand: Move platform_nand_xxx definitions out of rawnand.hBoris Brezillon1-2/+1
platform_nand_xxx definitions are just used by the plat_nand driver. Let's move those definitions out of the core/driver-agnostic rawnand.h header. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-10-03mtd: rawnand: plat_nand: Pass a nand_chip object to all platform_nand_ctrl hooksBoris Brezillon1-2/+2
Let's make the raw NAND API consistent by patching all helpers and hooks to take a nand_chip object instead of an mtd_info one or remove the mtd_info object when both are passed. In order to do that, we first need to update the platform_nand_ctrl hooks to take a nand_chip object instead of an mtd_info. We add temporary plat_nand_xxx() wrappers to the do the mtd -> chip conversion, but those will be dropped when patching nand_chip hooks to take a nand_chip object. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Reviewed-by: Alexander Sverdlin <alexander.sverdlin@gmail.com> Acked-by: Alexander Sverdlin <alexander.sverdlin@gmail.com> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Acked-by: Krzysztof Halasa <khalasa@piap.pl> Acked-by: Paul Burton <paul.burton@mips.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-08-28MIPS: Convert to using %pOFn instead of device_node.nameRob Herring1-7/+7
In preparation to remove the node name pointer from struct device_node, convert printf users to use the %pOFn format specifier. Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Paul Burton <paul.burton@mips.com> Patchwork: https://patchwork.linux-mips.org/patch/20315/ Cc: Ralf Baechle <ralf@linux-mips.org> Cc: James Hogan <jhogan@kernel.org> Cc: John Crispin <john@phrozen.org> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org
2018-07-17mips: unify prom_putchar() declarationsAlexander Sverdlin1-0/+1
prom_putchar() is used centrally in early printk infrastructure therefore at least MIPS should agree on the function return type. [paul.burton@mips.com: - Include linux/types.h in asm/setup.h to gain the bool typedef before we start include asm/setup.h elsewhere. - Include asm/setup.h in all files that use or define prom_putchar(). - Also standardise on signed rather than unsigned char argument.] Signed-off-by: Alexander Sverdlin <alexander.sverdlin@nokia.com> Signed-off-by: Paul Burton <paul.burton@mips.com> Patchwork: https://patchwork.linux-mips.org/patch/19842/ Cc: linux-mips@linux-mips.org Cc: Ralf Baechle <ralf@linux-mips.org> Cc: James Hogan <jhogan@kernel.org> Cc: Jonas Gorski <jonas.gorski@gmail.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Kate Stewart <kstewart@linuxfoundation.org> Cc: Philippe Ombredanne <pombredanne@nexb.com>
2018-06-24MIPS: netlogic: remove unnecessary of_platform_bus_probe callRob Herring1-14/+0
The DT core code will probe "simple-bus" by default, so remove the Netlogic specific call. The probing of simple-bus happens at arch_initcall_sync, so the call being removed here is already a nop. Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paul Burton <paul.burton@mips.com> Cc: James Hogan <jhogan@kernel.org> Cc: linux-mips@linux-mips.org Signed-off-by: Rob Herring <robh@kernel.org> Patchwork: https://patchwork.linux-mips.org/patch/19589/ Signed-off-by: Paul Burton <paul.burton@mips.com> Cc: linux-kernel@vger.kernel.org
2018-05-09scatterlist: move the NEED_SG_DMA_LENGTH config symbol to lib/KconfigChristoph Hellwig1-3/+0
This way we have one central definition of it, and user can select it as needed. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Anshuman Khandual <khandual@linux.vnet.ibm.com>
2018-05-09iommu-helper: mark iommu_is_span_boundary as inlineChristoph Hellwig1-3/+0
This avoids selecting IOMMU_HELPER just for this function. And we only use it once or twice in normal builds so this often even is a size reduction. Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-01-15mips/netlogic: remove swiotlb supportChristoph Hellwig3-100/+0
nlm_swiotlb_dma_ops is unused code, so the whole swiotlb support is dead. If it gets resurrected at some point it should use the generic swiotlb_dma_ops instead. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Christian König <christian.koenig@amd.com>
2018-01-15dma-mapping: clear harmful GFP_* flags in common codeChristoph Hellwig1-3/+0
Lift the code from x86 so that we behave consistently. In the future we should probably warn if any of these is set. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Jesper Nilsson <jesper.nilsson@axis.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> [m68k]
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman3-0/+3
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-15Merge branch '4.14-features' of ↵Linus Torvalds1-3/+5
git://git.linux-mips.org/pub/scm/ralf/upstream-linus Pull MIPS updates from Ralf Baechle: "This is the main pull request for 4.14 for MIPS; below a summary of the non-merge commits: CM: - Rename mips_cm_base to mips_gcr_base - Specify register size when generating accessors - Use BIT/GENMASK for register fields, order & drop shifts - Add cluster & block args to mips_cm_lock_other() CPC: - Use common CPS accessor generation macros - Use BIT/GENMASK for register fields, order & drop shifts - Introduce register modify (set/clear/change) accessors - Use change_*, set_* & clear_* where appropriate - Add CM/CPC 3.5 register definitions - Use GlobalNumber macros rather than magic numbers - Have asm/mips-cps.h include CM & CPC headers - Cluster support for topology functions - Detect CPUs in secondary clusters CPS: - Read GIC_VL_IDENT directly, not via irqchip driver DMA: - Consolidate coherent and non-coherent dma_alloc code - Don't use dma_cache_sync to implement fd_cacheflush FPU emulation / FP assist code: - Another series of 14 commits fixing corner cases such as NaN propgagation and other special input values. - Zero bits 32-63 of the result for a CLASS.D instruction. - Enhanced statics via debugfs - Do not use bools for arithmetic. GCC 7.1 moans about this. - Correct user fault_addr type Generic MIPS: - Enhancement of stack backtraces - Cleanup from non-existing options - Handle non word sized instructions when examining frame - Fix detection and decoding of ADDIUSP instruction - Fix decoding of SWSP16 instruction - Refactor handling of stack pointer in get_frame_info - Remove unreachable code from force_fcr31_sig() - Convert to using %pOF instead of full_name - Remove the R6000 support. - Move FP code from *_switch.S to *_fpu.S - Remove unused ST_OFF from r2300_switch.S - Allow platform to specify multiple its.S files - Add #includes to various files to ensure code builds reliable and without warning.. - Remove __invalidate_kernel_vmap_range - Remove plat_timer_setup - Declare various variables & functions static - Abstract CPU core & VP(E) ID access through accessor functions - Store core & VP IDs in GlobalNumber-style variable - Unify checks for sibling CPUs - Add CPU cluster number accessors - Prevent direct use of generic_defconfig - Make CONFIG_MIPS_MT_SMP default y - Add __ioread64_copy - Remove unnecessary inclusions of linux/irqchip/mips-gic.h GIC: - Introduce asm/mips-gic.h with accessor functions - Use new GIC accessor functions in mips-gic-timer - Remove counter access functions from irq-mips-gic.c - Remove gic_read_local_vp_id() from irq-mips-gic.c - Simplify shared interrupt pending/mask reads in irq-mips-gic.c - Simplify gic_local_irq_domain_map() in irq-mips-gic.c - Drop gic_(re)set_mask() functions in irq-mips-gic.c - Remove gic_set_polarity(), gic_set_trigger(), gic_set_dual_edge(), gic_map_to_pin() and gic_map_to_vpe() from irq-mips-gic.c. - Convert remaining shared reg access, local int mask access and remaining local reg access to new accessors - Move GIC_LOCAL_INT_* to asm/mips-gic.h - Remove GIC_CPU_INT* macros from irq-mips-gic.c - Move various definitions to the driver - Remove gic_get_usm_range() - Remove __gic_irq_dispatch() forward declaration - Remove gic_init() - Use mips_gic_present() in place of gic_present and remove gic_present - Move gic_get_c0_*_int() to asm/mips-gic.h - Remove linux/irqchip/mips-gic.h - Inline __gic_init() - Inline gic_basic_init() - Make pcpu_masks a per-cpu variable - Use pcpu_masks to avoid reading GIC_SH_MASK* - Clean up mti, reserved-cpu-vectors handling - Use cpumask_first_and() in gic_set_affinity() - Let the core set struct irq_common_data affinity microMIPS: - Fix microMIPS stack unwinding on big endian systems MIPS-GIC: - SYNC after enabling GIC region NUMA: - Remove the unused parent_node() macro R6: - Constify r2_decoder_tables - Add accessor & bit definitions for GlobalNumber SMP: - Constify smp ops - Allow boot_secondary SMP op to return errors VDSO: - Drop gic_get_usm_range() usage - Avoid use of linux/irqchip/mips-gic.h Platform changes: Alchemy: - Add devboard machine type to cpuinfo - update cpu feature overrides - Threaded carddetect irqs for devboards AR7: - allow NULL clock for clk_get_rate BCM63xx: - Fix ENETDMA_6345_MAXBURST_REG offset - Allow NULL clock for clk_get_rate CI20: - Enable GPIO and RTC drivers in defconfig - Add ethernet and fixed-regulator nodes to DTS Generic platform: - Move Boston and NI 169445 FIT image source to their own files - Include asm/bootinfo.h for plat_fdt_relocated() - Include asm/time.h for get_c0_*_int() - Include asm/bootinfo.h for plat_fdt_relocated() - Include asm/time.h for get_c0_*_int() - Allow filtering enabled boards by requirements - Don't explicitly disable CONFIG_USB_SUPPORT - Bump default NR_CPUS to 16 JZ4700: - Probe the jz4740-rtc driver from devicetree Lantiq: - Drop check of boot select from the spi-falcon driver. - Drop check of boot select from the lantiq-flash MTD driver. - Access boot cause register in the watchdog driver through regmap - Add device tree binding documentation for the watchdog driver - Add docs for the RCU DT bindings. - Convert the fpi bus driver to a platform_driver - Remove ltq_reset_cause() and ltq_boot_select( - Switch to a proper reset driver - Switch to a new drivers/soc GPHY driver - Add an USB PHY driver for the Lantiq SoCs using the RCU module - Use of_platform_default_populate instead of __dt_register_buses - Enable MFD_SYSCON to be able to use it for the RCU MFD - Replace ltq_boot_select() with dummy implementation. Loongson 2F: - Allow NULL clock for clk_get_rate Malta: - Use new GIC accessor functions NI 169445: - Add support for NI 169445 board. - Only include in 32r2el kernels Octeon: - Add support for watchdog of 78XX SOCs. - Add support for watchdog of CN68XX SOCs. - Expose support for mips32r1, mips32r2 and mips64r1 - Enable more drivers in config file - Add support for accessing the boot vector. - Remove old boot vector code from watchdog driver - Define watchdog registers for 70xx, 73xx, 78xx, F75xx. - Make CSR functions node aware. - Allow access to CIU3 IRQ domains. - Misc cleanups in the watchdog driver Omega2+: - New board, add support and defconfig Pistachio: - Enable Root FS on NFS in defconfig Ralink: - Add Mediatek MT7628A SoC - Allow NULL clock for clk_get_rate - Explicitly request exclusive reset control in the pci-mt7620 PCI driver. SEAD3: - Only include in 32 bit kernels by default VoCore: - Add VoCore as a vendor t0 dt-bindings - Add defconfig file" * '4.14-features' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (167 commits) MIPS: Refactor handling of stack pointer in get_frame_info MIPS: Stacktrace: Fix microMIPS stack unwinding on big endian systems MIPS: microMIPS: Fix decoding of swsp16 instruction MIPS: microMIPS: Fix decoding of addiusp instruction MIPS: microMIPS: Fix detection of addiusp instruction MIPS: Handle non word sized instructions when examining frame MIPS: ralink: allow NULL clock for clk_get_rate MIPS: Loongson 2F: allow NULL clock for clk_get_rate MIPS: BCM63XX: allow NULL clock for clk_get_rate MIPS: AR7: allow NULL clock for clk_get_rate MIPS: BCM63XX: fix ENETDMA_6345_MAXBURST_REG offset mips: Save all registers when saving the frame MIPS: Add DWARF unwinding to assembly MIPS: Make SAVE_SOME more standard MIPS: Fix issues in backtraces MIPS: jz4780: DTS: Probe the jz4740-rtc driver from devicetree MIPS: Ci20: Enable RTC driver watchdog: octeon-wdt: Add support for 78XX SOCs. watchdog: octeon-wdt: Add support for cn68XX SOCs. watchdog: octeon-wdt: File cleaning. ...
2017-08-30MIPS: SMP: Allow boot_secondary SMP op to return errorsPaul Burton1-1/+3
Allow the boot_secondary SMP op to return an error to __cpu_up(), which will in turn return it to its caller. This will allow SMP implementations to return errors quickly in cases they they know have failed, rather than relying upon __cpu_up() eventually timing out waiting for the cpu_running completion. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/17014/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-08-30MIPS: Abstract CPU core & VP(E) ID access through accessor functionsPaul Burton1-1/+1
We currently have fields in struct cpuinfo_mips for the core & VP(E) ID of a particular CPU, and various pieces of code directly access those fields. This patch abstracts such access by introducing accessor functions cpu_core(), cpu_set_core(), cpu_vpe_id() & cpu_set_vpe_id() and having code that needs to access these values call those functions rather than directly accessing the struct cpuinfo_mips fields. This prepares us for changes to the way in which those values are stored in later patches. The cpu_vpe_id() function is introduced even though we already had a cpu_vpe_id() macro for a couple of reasons: 1) It's more consistent with the core, and future cluster, accessors. 2) It ensures a sensible return type without explicit casts. 3) It's generally preferable to use functions rather than macros. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/17009/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-08-29MIPS: SMP: Constify smp opsMatt Redfearn1-1/+1
smp_ops providers do not modify their ops structures, so they should be made const for robustness. Since currently the MIPS kernel is not mapped with memory protection, this does not in itself provide any security benefit, but it still makes sense to make this change. There are also slight code size efficincies from the structure being made read-only, saving 128 bytes of kernel text on a pistachio_defconfig. Before: text data bss dec hex filename 7187239 1772752 470224 9430215 8fe4c7 vmlinux After: text data bss dec hex filename 7187111 1772752 470224 9430087 8fe447 vmlinux Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Marcin Nowakowski <marcin.nowakowski@imgtec.com> Cc: Bart Van Assche <bart.vanassche@sandisk.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Huacai Chen <chenhc@lemote.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Kevin Cernekee <cernekee@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Doug Ledford <dledford@redhat.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: Joe Perches <joe@perches.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Steven J. Hill <steven.hill@cavium.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/16784/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-08-13mtd: nand: Rename nand.h into rawnand.hBoris Brezillon1-1/+1
We are planning to share more code between different NAND based devices (SPI NAND, OneNAND and raw NANDs), but before doing that we need to move the existing include/linux/mtd/nand.h file into include/linux/mtd/rawnand.h so we can later create a nand.h header containing all common structure and function prototypes. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Peter Pan <peterpandong@micron.com> Acked-by: Vladimir Zapolskiy <vz@mleia.com> Acked-by: Alexander Sverdlin <alexander.sverdlin@gmail.com> Acked-by: Wenyou Yang <wenyou.yang@microchip.com> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Han Xu <han.xu@nxp.com> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Shawn Guo <shawnguo@kernel.org> Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-By: Harvey Hunt <harveyhuntnexus@gmail.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Krzysztof Halasa <khalasa@piap.pl>
2017-03-08MIPS: Add missing include filesArnd Bergmann2-0/+4
After the split of linux/sched.h, several platforms in arch/mips stopped building. Add the respective additional #include statements to fix the problem I first tried adding these into asm/processor.h, but ran into circular header dependencies with that which I could not figure out. The commit I listed as causing the problem is the branch merge, as there is likely a combination of multiple patches in that branch. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-mips@linux-mips.org Cc: ralf@linux-mips.org Fixes: 1827adb11ad2 ("Merge branch 'WIP.sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip") Link: http://lkml.kernel.org/r/20170308072931.3836696-1-arnd@arndb.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-02-25Merge tag 'for-next-dma_ops' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma Pull rdma DMA mapping updates from Doug Ledford: "Drop IB DMA mapping code and use core DMA code instead. Bart Van Assche noted that the ib DMA mapping code was significantly similar enough to the core DMA mapping code that with a few changes it was possible to remove the IB DMA mapping code entirely and switch the RDMA stack to use the core DMA mapping code. This resulted in a nice set of cleanups, but touched the entire tree and has been kept separate for that reason." * tag 'for-next-dma_ops' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (37 commits) IB/rxe, IB/rdmavt: Use dma_virt_ops instead of duplicating it IB/core: Remove ib_device.dma_device nvme-rdma: Switch from dma_device to dev.parent RDS: net: Switch from dma_device to dev.parent IB/srpt: Modify a debug statement IB/srp: Switch from dma_device to dev.parent IB/iser: Switch from dma_device to dev.parent IB/IPoIB: Switch from dma_device to dev.parent IB/rxe: Switch from dma_device to dev.parent IB/vmw_pvrdma: Switch from dma_device to dev.parent IB/usnic: Switch from dma_device to dev.parent IB/qib: Switch from dma_device to dev.parent IB/qedr: Switch from dma_device to dev.parent IB/ocrdma: Switch from dma_device to dev.parent IB/nes: Remove a superfluous assignment statement IB/mthca: Switch from dma_device to dev.parent IB/mlx5: Switch from dma_device to dev.parent IB/mlx4: Switch from dma_device to dev.parent IB/i40iw: Remove a superfluous assignment statement IB/hns: Switch from dma_device to dev.parent ...
2017-01-25MIPS: Avoid old-style declarationArnd Bergmann1-1/+1
gcc warns about nonstandard declarations: arch/mips/sgi-ip32/ip32-irq.c:31:1: error: 'inline' is not at beginning of declaration [-Werror=old-style-declaration] arch/mips/sgi-ip32/ip32-irq.c:36:1: error: 'inline' is not at beginning of declaration [-Werror=old-style-declaration] arch/mips/sgi-ip27/ip27-klnuma.c: In function 'replicate_kernel_text': arch/mips/sgi-ip27/ip27-klnuma.c:85:116: error: old-style function definition [-Werror=old-style-definition] Moving 'inline' before the return type, and adding argument types shuts up the warning here. This patch affects several platforms, but all in a trivial way. I'm fixing up all instances I found in any of the 'defconfig' builds. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/15050/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-01-24treewide: Constify most dma_map_ops structuresBart Van Assche1-1/+1
Most dma_map_ops structures are never modified. Constify these structures such that these can be write-protected. This patch has been generated as follows: git grep -l 'struct dma_map_ops' | xargs -d\\n sed -i \ -e 's/struct dma_map_ops/const struct dma_map_ops/g' \ -e 's/const struct dma_map_ops {/struct dma_map_ops {/g' \ -e 's/^const struct dma_map_ops;$/struct dma_map_ops;/' \ -e 's/const const struct dma_map_ops /const struct dma_map_ops /g'; sed -i -e 's/const \(struct dma_map_ops intel_dma_ops\)/\1/' \ $(git grep -l 'struct dma_map_ops intel_dma_ops'); sed -i -e 's/const \(struct dma_map_ops dma_iommu_ops\)/\1/' \ $(git grep -l 'struct dma_map_ops' | grep ^arch/powerpc); sed -i -e '/^struct vmd_dev {$/,/^};$/ s/const \(struct dma_map_ops[[:blank:]]dma_ops;\)/\1/' \ -e '/^static void vmd_setup_dma_ops/,/^}$/ s/const \(struct dma_map_ops \*dest\)/\1/' \ -e 's/const \(struct dma_map_ops \*dest = \&vmd->dma_ops\)/\1/' \ drivers/pci/host/*.c sed -i -e '/^void __init pci_iommu_alloc(void)$/,/^}$/ s/dma_ops->/intel_dma_ops./' arch/ia64/kernel/pci-dma.c sed -i -e 's/static const struct dma_map_ops sn_dma_ops/static struct dma_map_ops sn_dma_ops/' arch/ia64/sn/pci/pci_dma.c sed -i -e 's/(const struct dma_map_ops \*)//' drivers/misc/mic/bus/vop_bus.c Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Juergen Gross <jgross@suse.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: linux-arch@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: Russell King <linux@armlinux.org.uk> Cc: x86@kernel.org Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-01-03MIPS: Netlogic: Fix assembler warning from smpboot.SPaul Burton1-2/+2
The netlogic platform can be built for either MIPS32 or MIPS64, and when built for MIPS32 (as by nlm_xlr_defconfig) the use of the dla pseudo-instruction leads to warnings such as the following from recent versions of the GNU assembler: arch/mips/netlogic/common/smpboot.S: Assembler messages: arch/mips/netlogic/common/smpboot.S:62: Warning: dla used to load 32-bit register; recommend using la instead arch/mips/netlogic/common/smpboot.S:63: Warning: dla used to load 32-bit register; recommend using la instead Avoid these warnings by using the PTR_LA macro to make use of the appropriate la or dla pseudo-instruction for the build. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Fixes: 66d29985fab8 ("MIPS: Netlogic: Merge some of XLR/XLP wakup code") Cc: James Hogan <james.hogan@imgtec.com> Cc: Jayachandran C <jchandra@broadcom.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/14185/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-01-03MIPS: Netlogic: Exclude netlogic,xlp-pic code from XLR buildsPaul Burton1-2/+2
Code in arch/mips/netlogic/common/irq.c which handles the XLP PIC fails to build in XLR configurations due to cpu_is_xlp9xx not being defined, leading to the following build failure: arch/mips/netlogic/common/irq.c: In function ‘xlp_of_pic_init’: arch/mips/netlogic/common/irq.c:298:2: error: implicit declaration of function ‘cpu_is_xlp9xx’ [-Werror=implicit-function-declaration] if (cpu_is_xlp9xx()) { ^ Although the code was conditional upon CONFIG_OF which is indirectly selected by CONFIG_NLM_XLP_BOARD but not CONFIG_NLM_XLR_BOARD, the failing XLR with CONFIG_OF configuration can be configured manually or by randconfig. Fix the build failure by making the affected XLP PIC code conditional upon CONFIG_CPU_XLP which is used to guard the inclusion of asm/netlogic/xlp-hal/xlp.h that provides the required cpu_is_xlp9xx function. [ralf@linux-mips.org: Fixed up as per Jayachandran's suggestion.] Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Jayachandran C <jchandra@broadcom.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14524/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-12-25clocksource: Use a plain u64 instead of cycle_tThomas Gleixner1-2/+2
There is no point in having an extra type for extra confusion. u64 is unambiguous. Conversion was done with the following coccinelle script: @rem@ @@ -typedef u64 cycle_t; @fix@ typedef cycle_t; @@ -cycle_t +u64 Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: John Stultz <john.stultz@linaro.org>
2016-08-04dma-mapping: use unsigned long for dma_attrsKrzysztof Kozlowski1-2/+2
The dma-mapping core and the implementations do not change the DMA attributes passed by pointer. Thus the pointer can point to const data. However the attributes do not have to be a bitfield. Instead unsigned long will do fine: 1. This is just simpler. Both in terms of reading the code and setting attributes. Instead of initializing local attributes on the stack and passing pointer to it to dma_set_attr(), just set the bits. 2. It brings safeness and checking for const correctness because the attributes are passed by value. Semantic patches for this change (at least most of them): virtual patch virtual context @r@ identifier f, attrs; @@ f(..., - struct dma_attrs *attrs + unsigned long attrs , ...) { ... } @@ identifier r.f; @@ f(..., - NULL + 0 ) and // Options: --all-includes virtual patch virtual context @r@ identifier f, attrs; type t; @@ t f(..., struct dma_attrs *attrs); @@ identifier r.f; @@ f(..., - NULL + 0 ) Link: http://lkml.kernel.org/r/1468399300-5399-2-git-send-email-k.kozlowski@samsung.com Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: Vineet Gupta <vgupta@synopsys.com> Acked-by: Robin Murphy <robin.murphy@arm.com> Acked-by: Hans-Christian Noren Egtvedt <egtvedt@samfundet.no> Acked-by: Mark Salter <msalter@redhat.com> [c6x] Acked-by: Jesper Nilsson <jesper.nilsson@axis.com> [cris] Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> [drm] Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com> Acked-by: Joerg Roedel <jroedel@suse.de> [iommu] Acked-by: Fabien Dessenne <fabien.dessenne@st.com> [bdisp] Reviewed-by: Marek Szyprowski <m.szyprowski@samsung.com> [vb2-core] Acked-by: David Vrabel <david.vrabel@citrix.com> [xen] Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> [xen swiotlb] Acked-by: Joerg Roedel <jroedel@suse.de> [iommu] Acked-by: Richard Kuo <rkuo@codeaurora.org> [hexagon] Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> [m68k] Acked-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> [s390] Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Acked-by: Hans-Christian Noren Egtvedt <egtvedt@samfundet.no> [avr32] Acked-by: Vineet Gupta <vgupta@synopsys.com> [arc] Acked-by: Robin Murphy <robin.murphy@arm.com> [arm64 and dma-iommu] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-13MIPS: Define & use CP0_EBase bit definitionsJames Hogan2-2/+2
Add definitions for the bits & fields in the CP0_EBase register, and use them from a few different places in arch/mips which hardcoded these values. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Jayachandran C <jchandra@broadcom.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/13222/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-09MIPS: Netlogic: Fix CP0_EBASE redefinition warningsJames Hogan2-9/+6
A couple of netlogic assembly files define CP0_EBASE to $15, the same as CP0_PRID in mipsregs.h, and use it for accessing both CP0_PRId and CP0_EBase registers. However commit 609cf6f2291a ("MIPS: CPS: Early debug using an ns16550-compatible UART") added a different definition of CP0_EBASE to mipsregs.h, which included a register select of 1. This causes harmless build warnings like the following: arch/mips/netlogic/common/reset.S:53:0: warning: "CP0_EBASE" redefined #define CP0_EBASE $15 ^ In file included from arch/mips/netlogic/common/reset.S:41:0: ./arch/mips/include/asm/mipsregs.h:63:0: note: this is the location of the previous definition #define CP0_EBASE $15, 1 ^ Update the code to use the definitions from mipsregs.h for accessing both registers. Fixes: 609cf6f2291a ("MIPS: CPS: Early debug using an ns16550-compatible UART") Signed-off-by: James Hogan <james.hogan@imgtec.com> Acked-by: Jayachandran C <jchandra@broadcom.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13183/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-11-11MIPS: Make MIPS_CMDLINE_DTB defaultJonas Gorski1-1/+0
Seval of-enabled machines (bmips, lantiq, xlp, pistachio, ralink) copied the arguments from dtb to arcs_command_line to prevent the kernel from overwriting them. Since there is now an option to keep the dtb arguments, default to the new option remove the "backup" to arcs_command_line in case of USE_OF is enabled, except for those platforms that still take the bootloader arguments or do not use any at all. Signed-off-by: Jonas Gorski <jogo@openwrt.org> Cc: linux-mips@linux-mips.org Cc: Kevin Cernekee <cernekee@gmail.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: John Crispin <blogic@openwrt.org> Cc: Ganesan Ramalingam <ganesanr@broadcom.com> Cc: Jayachandran C <jchandra@broadcom.com> Cc: Andrew Bresticker <abrestic@chromium.org> Cc: James Hartley <james.hartley@imgtec.com> Patchwork: https://patchwork.linux-mips.org/patch/11285/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-09-16genirq: Remove irq argument from irq flow handlersThomas Gleixner1-2/+2
Most interrupt flow handlers do not use the irq argument. Those few which use it can retrieve the irq number from the irq descriptor. Remove the argument. Search and replace was done with coccinelle and some extra helper scripts around it. Thanks to Julia for her help! Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Julia Lawall <Julia.Lawall@lip6.fr> Cc: Jiang Liu <jiang.liu@linux.intel.com>
2015-09-10dma-mapping: consolidate dma_{alloc,free}_{attrs,coherent}Christoph Hellwig1-10/+0
Since 2009 we have a nice asm-generic header implementing lots of DMA API functions for architectures using struct dma_map_ops, but unfortunately it's still missing a lot of APIs that all architectures still have to duplicate. This series consolidates the remaining functions, although we still need arch opt outs for two of them as a few architectures have very non-standard implementations. This patch (of 5): The coherent DMA allocator works the same over all architectures supporting dma_map operations. This patch consolidates them and converges the minor differences: - the debug_dma helpers are now called from all architectures, including those that were previously missing them - dma_alloc_from_coherent and dma_release_from_coherent are now always called from the generic alloc/free routines instead of the ops dma-mapping-common.h always includes dma-coherent.h to get the defintions for them, or the stubs if the architecture doesn't support this feature - checks for ->alloc / ->free presence are removed. There is only one magic instead of dma_map_ops without them (mic_dma_ops) and that one is x86 only anyway. Besides that only x86 needs special treatment to replace a default devices if none is passed and tweak the gfp_flags. An optional arch hook is provided for that. [linux@roeck-us.net: fix build] [jcmvbkbc@gmail.com: fix xtensa] Signed-off-by: Christoph Hellwig <hch@lst.de> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Russell King <linux@arm.linux.org.uk> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Michal Simek <monstr@monstr.eu> Cc: Jonas Bonn <jonas@southpole.se> Cc: Chris Metcalf <cmetcalf@ezchip.com> Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-03MIPS: Netlogic: Fix 0x0x prefixes.Antonio Ospite1-1/+1
Fix the 0x0x prefix in integer constants, in this case the registers interval is actually 0x8065 .. 0x80A4 as confirmed some lines above in the code. Signed-off-by: Antonio Ospite <ao2@ao2.it> Cc: linux-mips@linux-mips.org Cc: Jiri Kosina <trivial@kernel.org> Patchwork: https://patchwork.linux-mips.org/patch/9908/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-09-03MIPS: Netlogic: NAND IRQ mappingSubhendu Sekhar Behera1-0/+2
Add NAND IRQ mapping for XLP9xx processor. Signed-off-by: Subhendu Sekhar Behera <sbehera@broadcom.com> Signed-off-by: Jayachandran C <jchandra@broadcom.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/10820/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-09-03MIPS: Netlogic: Use chip_data for irq_chip methodsKamlakant Patel1-6/+6
Update mips/netlogic/common/irq.c and mips/pci/msi-xlp.c to use chip_data to store interrupt controller data pointer. It uses handler_data now, and that causes errors when an API (like the GPIO subsystem) tries to use the handler data. Signed-off-by: Kamlakant Patel <kamlakant.patel@broadcom.com> Signed-off-by: Jayachandran C <jchandra@broadcom.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/10817/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-08-26MIPS: netlogic: Prepare ipi handlers for irq argument removalThomas Gleixner1-2/+4
The irq argument of most interrupt flow handlers is unused or merily used instead of a local variable. The handlers which need the irq argument can retrieve the irq number from the irq descriptor. Search and update was done with coccinelle and the invaluable help of Julia Lawall. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Julia Lawall <Julia.Lawall@lip6.fr> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: linux-mips@linux-mips.org Cc: LKML <linux-kernel@vger.kernel.org> Patchwork: https://patchwork.linux-mips.org/patch/10705/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-08-03MIPS: SMP: Don't increment irq_count multiple times for call function IPIsAlex Smith1-1/+1
The majority of SMP platforms handle their IPIs through do_IRQ() which calls irq_{enter/exit}(). When a call function IPI is received, smp_call_function_interrupt() is called which also calls irq_{enter,exit}(), meaning irq_count is raised twice. When tick broadcasting is used (which is implemented via a call function IPI), this incorrectly causes all CPU idle time on the core receiving broadcast ticks to be accounted as time spent servicing IRQs, as account_process_tick() will account as such if irq_count is greater than 1. This results in 100% CPU usage being reported on a core which receives its ticks via broadcast. This patch removes the SMP smp_call_function_interrupt() wrapper which calls irq_{enter,exit}(). Platforms which handle their IPIs through do_IRQ() now call generic_smp_call_function_interrupt() directly to avoid incrementing irq_count a second time. Platforms which don't (loongson, sgi-ip27, sibyte) call generic_smp_call_function_interrupt() wrapped in irq_{enter,exit}(). Signed-off-by: Alex Smith <alex.smith@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/10770/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-06-21MIPS: netlogic: remove unnecessary MTD partition probe specificationBrian Norris1-3/+0
The cmdlinepart parser is already supported in the default probe. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Cc: linux-mtd@lists.infradead.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/10071/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-04-13Merge branch '4.0-fixes' into mips-for-linux-nextRalf Baechle1-0/+13
2015-04-10MIPS: Netlogic: Fix for SATA PHY initGanesan Ramalingam1-0/+13
Update to the SATA PHY initialization. This is needed for SATA detection to succeed in all configurations. Signed-off-by: Ganesan Ramalingam <ganesanr@broadcom.com> Signed-off-by: Jayachandran C <jchandra@broadcom.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/8886/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-04-08MIPS: Netlogic: Fix double inclusion of <asm/netlogic/common.h>.Ralf Baechle1-1/+0
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-04-01MIPS: Netlogic: Add built-in dts for XLP5xx boardsGanesan Ramalingam2-3/+16
Signed-off-by: Ganesan Ramalingam <ganesanr@broadcom.com> Signed-off-by: Jayachandran C <jchandra@broadcom.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/8896/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-24 21:31:10 +0000