summaryrefslogtreecommitdiffstats
path: root/arch/mips/kernel
AgeCommit message (Collapse)AuthorFilesLines
2013-05-17MIPS: Extract schedule_mfi info from __scheduleTony Wu1-2/+32
schedule_mfi is supposed to be extracted from schedule(), and is used in thread_saved_pc and get_wchan. But, after optimization, schedule() is reduced to a sibling call to __schedule(), and no real frame info can be extracted. One solution is to compile schedule() with -fno-omit-frame-pointer and -fno-optimize-sibling-calls, but that will incur performance degradation. Another solution is to extract info from the real scheduler, __schedule, and this is the approache adopted here. This patch reads the __schedule address by either following the 'j' call in schedule if KALLSYMS is disabled or by using kallsyms_lookup_name to lookup __schedule if KALLSYMS is available, then, extracts schedule_mfi from __schedule frame info. This patch also fixes the "Can't analyze schedule() prologue" warning at boot time. Signed-off-by: Tony Wu <tung7970@gmail.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5237/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-05-17MIPS: Fix sibling call handling in get_frame_infoTony Wu1-2/+4
Given a function, get_frame_info() analyzes its instructions to figure out frame size and return address. get_frame_info() works as follows: 1. analyze up to 128 instructions if the function size is unknown 2. search for 'addiu/daddiu sp,sp,-immed' for frame size 3. search for 'sw ra,offset(sp)' for return address 4. end search when it sees jr/jal/jalr This leads to an issue when the given function is a sibling call, example shown as follows. 801ca110 <schedule>: 801ca110: 8f820000 lw v0,0(gp) 801ca114: 8c420000 lw v0,0(v0) 801ca118: 080726f0 j 801c9bc0 <__schedule> 801ca11c: 00000000 nop 801ca120 <io_schedule>: 801ca120: 27bdffe8 addiu sp,sp,-24 801ca124: 3c028022 lui v0,0x8022 801ca128: afbf0014 sw ra,20(sp) In this case, get_frame_info() cannot properly detect schedule's frame info, and eventually returns io_schedule's instead. This patch adds 'j' to the end search condition to workaround sibling call cases. Signed-off-by: Tony Wu <tung7970@gmail.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5236/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-05-17MIPS: Fix build error for crash_dump.c in 3.10-rc1EunBong Song1-0/+1
This patch fixes crash_dump.c build error. Build error logs are as follow. arch/mips/kernel/crash_dump.c: In function 'kdump_buf_page_init': arch/mips/kernel/crash_dump.c:67: error: implicit declaration of function 'kmalloc' arch/mips/kernel/crash_dump.c:67: error: assignment makes pointer from integer without a cast Signed-off-by: EunBong Song <eunb.song@samsung.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/5238/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-05-16Revert "MIPS: Allow ASID size to be determined at boot time."David Daney3-10/+8
This reverts commit d532f3d26716a39dfd4b88d687bd344fbe77e390. The original commit has several problems: 1) Doesn't work with 64-bit kernels. 2) Calls TLBMISS_HANDLER_SETUP() before the code is generated. 3) Calls TLBMISS_HANDLER_SETUP() twice in per_cpu_trap_init() when only one call is needed. [ralf@linux-mips.org: Also revert the bits of the ASID patch which were hidden in the KVM merge.] Signed-off-by: David Daney <david.daney@cavium.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: "Steven J. Hill" <Steven.Hill@imgtec.com> Cc: David Daney <david.daney@cavium.com> Patchwork: https://patchwork.linux-mips.org/patch/5242/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-05-10Merge branch 'for-linus' of ↵Linus Torvalds2-8/+1
git://git.kernel.org/pub/scm/linux/kernel/git/viro/signal Pull stray syscall bits from Al Viro: "Several syscall-related commits that were missing from the original" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/signal: switch compat_sys_sysctl to COMPAT_SYSCALL_DEFINE unicore32: just use mmap_pgoff()... unify compat fanotify_mark(2), switch to COMPAT_SYSCALL_DEFINE x86, vm86: fix VM86 syscalls: use SYSCALL_DEFINEx(...)
2013-05-10Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds23-364/+2172
Pull MIPS updates from Ralf Baechle: - More work on DT support for various platforms - Various fixes that were to late to make it straight into 3.9 - Improved platform support, in particular the Netlogic XLR and BCM63xx, and the SEAD3 and Malta eval boards. - Support for several Ralink SOC families. - Complete support for the microMIPS ASE which basically reencodes the existing MIPS32/MIPS64 ISA to use non-constant size instructions. - Some fallout from LTO work which remove old cruft and will generally make the MIPS kernel easier to maintain and resistant to compiler optimization, even in absence of LTO. - KVM support. While MIPS has announced hardware virtualization extensions this KVM extension uses trap and emulate mode for virtualization of MIPS32. More KVM work to add support for VZ hardware virtualizaiton extensions and MIPS64 will probably already be merged for 3.11. Most of this has been sitting in -next for a long time. All defconfigs have been build or run time tested except three for which fixes are being sent by other maintainers. Semantic conflict with kvm updates done as per Ralf * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (118 commits) MIPS: Add new GIC clockevent driver. MIPS: Formatting clean-ups for clocksources. MIPS: Refactor GIC clocksource code. MIPS: Move 'gic_frequency' to common location. MIPS: Move 'gic_present' to common location. MIPS: MIPS16e: Add unaligned access support. MIPS: MIPS16e: Support handling of delay slots. MIPS: MIPS16e: Add instruction formats. MIPS: microMIPS: Optimise 'strnlen' core library function. MIPS: microMIPS: Optimise 'strlen' core library function. MIPS: microMIPS: Optimise 'strncpy' core library function. MIPS: microMIPS: Optimise 'memset' core library function. MIPS: microMIPS: Add configuration option for microMIPS kernel. MIPS: microMIPS: Disable LL/SC and fix linker bug. MIPS: microMIPS: Add vdso support. MIPS: microMIPS: Add unaligned access support. MIPS: microMIPS: Support handling of delay slots. MIPS: microMIPS: Add support for exception handling. MIPS: microMIPS: Floating point support. MIPS: microMIPS: Fix macro naming in micro-assembler. ...
2013-05-09unify compat fanotify_mark(2), switch to COMPAT_SYSCALL_DEFINEAl Viro2-8/+1
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-05-09Merge branch 'mti-next' of ↵Ralf Baechle17-333/+2029
git://git.linux-mips.org/pub/scm/sjhill/linux-sjhill into mips-for-linux-next
2013-05-09Merge branch 'next/kvm' into mips-for-linux-nextRalf Baechle5-1/+81
2013-05-09MIPS: Add new GIC clockevent driver.Raghu Gandham4-1/+141
Add new clockevent driver that uses the counter present on the MIPS Global Interrupt Controller. Signed-off-by: Raghu Gandham <Raghu.Gandham@imgtec.com> Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com>
2013-05-09MIPS: Formatting clean-ups for clocksources.Steven J. Hill1-3/+0
Various whitespace and #ifdef removals for GIC and R4K clocksources. Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com>
2013-05-09MIPS: Refactor GIC clocksource code.Steven J. Hill3-12/+19
Reorganize some of the GIC clocksource driver code. Below is a list of the various changes. * No longer select CSRC_GIC by default for Malta platform. * Limit choice for either the GIC or R4K clocksource, not both. * Change location in Makefile. * Created new 'gic_read_count' function in common 'irq-gic.c' file. * Change 'git_hpt_read' function in 'csrc-gic.c' to use new function. * Surround GIC specific code in Malta platform code with #ifdef's. * Only initialize the GIC clocksource if it was selected. Original code called it unconditionally if a GIC was found. Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com>
2013-05-09MIPS: Move 'gic_frequency' to common location.Steven J. Hill1-0/+1
Move the global variable 'gic_frequency' to be defined in the file 'arch/mips/kernel/irq-gic.c' instead of defining it individually for each platform making use of the GIC. Also change the type to be an unsigned integer instead of signed. Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com>
2013-05-09MIPS: Move 'gic_present' to common location.Steven J. Hill2-2/+2
Move the global variable 'gic_present' to be defined in the file 'arch/mips/kernel/irq-gic.c' instead of defining it individually for each platform making use of the GIC. Also change the type to be an unsigned integer instead of signed. Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com>
2013-05-09MIPS: MIPS16e: Add unaligned access support.Steven J. Hill1-0/+255
Add logic needed to handle unaligned accesses in MIPS16e mode. Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com> Signed-off-by: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com>
2013-05-09MIPS: MIPS16e: Support handling of delay slots.Steven J. Hill1-5/+98
Add logic needed to properly calculate exceptions for delay slots when in MIPS16e mode. Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com>
2013-05-09MIPS: microMIPS: Add configuration option for microMIPS kernel.Steven J. Hill1-0/+4
This adds the option to build the Linux kernel using only the microMIPS ISA. The resulting kernel binary is, at a minimum, 20% smaller than using the MIPS32R2 ISA. Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com>
2013-05-09MIPS: microMIPS: Add vdso support.Douglas Leung1-0/+9
Support vdso in microMIPS mode. Signed-off-by: Douglas Leung <Douglas.Leung@imgtec.com> Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com>
2013-05-09MIPS: microMIPS: Add unaligned access support.Leonid Yegoshin2-201/+1112
Add logic needed to handle unaligned accesses in microMIPS mode. Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com> Signed-off-by: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com>
2013-05-09MIPS: microMIPS: Support handling of delay slots.Leonid Yegoshin1-0/+85
Add logic needed to properly calculate exceptions for delay slots when in microMIPS mode. Signed-off-by: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com>
2013-05-09MIPS: microMIPS: Add support for exception handling.Steven J. Hill5-101/+277
All exceptions must be taken in microMIPS mode, never in classic MIPS mode or the kernel falls apart. A few NOP instructions are used to maintain the correct alignment of microMIPS versions of the exception vectors. Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com>
2013-05-09MIPS: microMIPS: Floating point support.Leonid Yegoshin2-5/+19
Add logic needed to do floating point emulation in microMIPS mode. Signed-off-by: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Signed-off-by: Steven J. Hill <Steven. Hill@imgtec.com>
2013-05-08MIPS: Allow ASID size to be determined at boot time.Steven J. Hill3-8/+10
Original patch by Ralf Baechle and removed by Harold Koerfgen with commit f67e4ffc79905482c3b9b8c8dd65197bac7eb508. This allows for more generic kernels since the size of the ASID and corresponding masks can be determined at run-time. This patch is also required for the new Aptiv cores and has been tested on Malta and Malta Aptiv platforms. [ralf@linux-mips.org: Added relevant part of fix https://patchwork.linux-mips.org/patch/5213/] Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-05-08MIPS: Export symbols used by KVM/MIPS moduleSanjay Lal1-0/+1
Signed-off-by: Sanjay Lal <sanjayl@kymasys.com> Cc: kvm@vger.kernel.org Cc: linux-mips@linux-mips.org Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-05-08MIPS: ASM offsets for VCPU arch specific fields.Sanjay Lal1-0/+66
Signed-off-by: Sanjay Lal <sanjayl@kymasys.com> Cc: kvm@vger.kernel.org Cc: linux-mips@linux-mips.org Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-05-08KVM/MIPS32: KVM Guest kernel support.Sanjay Lal3-1/+14
Both Guest kernel and Guest Userspace execute in UM. The memory map is as follows: Guest User address space: 0x00000000 -> 0x40000000 Guest Kernel Unmapped: 0x40000000 -> 0x60000000 Guest Kernel Mapped: 0x60000000 -> 0x80000000 - Guest Usermode virtual memory is limited to 1GB. Signed-off-by: Sanjay Lal <sanjayl@kymasys.com> Cc: kvm@vger.kernel.org Cc: linux-mips@linux-mips.org Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-05-08Merge branch 'mips-next-3.10' of ↵Ralf Baechle8-54/+75
git://git.linux-mips.org/pub/scm/john/linux-john into mips-for-linux-next
2013-05-08MIPS: add detect_memory_region()John Crispin1-0/+22
Add a generic way of detecting the available RAM. This function is based on the implementation already used by ath79. Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/5178/
2013-05-08MIPS: move mips_{set,get}_machine_name() to a more generic placeJohn Crispin4-25/+36
Previously this functionality was only available to users of the mips_machine api. Moving the code to prom.c allows us to also add a OF wrapper. Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/5164/
2013-05-05mips: single_open() leaksAl Viro1-1/+1
Cc: stable@vger.kernel.org Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-05-01Merge branch 'for-linus' of ↵Linus Torvalds1-38/+26
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull VFS updates from Al Viro, Misc cleanups all over the place, mainly wrt /proc interfaces (switch create_proc_entry to proc_create(), get rid of the deprecated create_proc_read_entry() in favor of using proc_create_data() and seq_file etc). 7kloc removed. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (204 commits) don't bother with deferred freeing of fdtables proc: Move non-public stuff from linux/proc_fs.h to fs/proc/internal.h proc: Make the PROC_I() and PDE() macros internal to procfs proc: Supply a function to remove a proc entry by PDE take cgroup_open() and cpuset_open() to fs/proc/base.c ppc: Clean up scanlog ppc: Clean up rtas_flash driver somewhat hostap: proc: Use remove_proc_subtree() drm: proc: Use remove_proc_subtree() drm: proc: Use minor->index to label things, not PDE->name drm: Constify drm_proc_list[] zoran: Don't print proc_dir_entry data in debug reiserfs: Don't access the proc_dir_entry in r_open(), r_start() r_show() proc: Supply an accessor for getting the data from a PDE's parent airo: Use remove_proc_subtree() rtl8192u: Don't need to save device proc dir PDE rtl8187se: Use a dir under /proc/net/r8180/ proc: Add proc_mkdir_data() proc: Move some bits from linux/proc_fs.h to linux/{of.h,signal.h,tty.h} proc: Move PDE_NET() to fs/proc/proc_net.c ...
2013-05-01Merge branch 'for-linus' of ↵Linus Torvalds3-126/+7
git://git.kernel.org/pub/scm/linux/kernel/git/viro/signal Pull compat cleanup from Al Viro: "Mostly about syscall wrappers this time; there will be another pile with patches in the same general area from various people, but I'd rather push those after both that and vfs.git pile are in." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/signal: syscalls.h: slightly reduce the jungles of macros get rid of union semop in sys_semctl(2) arguments make do_mremap() static sparc: no need to sign-extend in sync_file_range() wrapper ppc compat wrappers for add_key(2) and request_key(2) are pointless x86: trim sys_ia32.h x86: sys32_kill and sys32_mprotect are pointless get rid of compat_sys_semctl() and friends in case of ARCH_WANT_OLD_COMPAT_IPC merge compat sys_ipc instances consolidate compat lookup_dcookie() convert vmsplice to COMPAT_SYSCALL_DEFINE switch getrusage() to COMPAT_SYSCALL_DEFINE switch epoll_pwait to COMPAT_SYSCALL_DEFINE convert sendfile{,64} to COMPAT_SYSCALL_DEFINE switch signalfd{,4}() to COMPAT_SYSCALL_DEFINE make SYSCALL_DEFINE<n>-generated wrappers do asmlinkage_protect make HAVE_SYSCALL_WRAPPERS unconditional consolidate cond_syscall and SYSCALL_ALIAS declarations teach SYSCALL_DEFINE<n> how to deal with long long/unsigned long long get rid of duplicate logics in __SC_....[1-6] definitions
2013-04-30Merge branch 'akpm' (incoming from Andrew)Linus Torvalds1-14/+1
Merge third batch of fixes from Andrew Morton: "Most of the rest. I still have two large patchsets against AIO and IPC, but they're a bit stuck behind other trees and I'm about to vanish for six days. - random fixlets - inotify - more of the MM queue - show_stack() cleanups - DMI update - kthread/workqueue things - compat cleanups - epoll udpates - binfmt updates - nilfs2 - hfs - hfsplus - ptrace - kmod - coredump - kexec - rbtree - pids - pidns - pps - semaphore tweaks - some w1 patches - relay updates - core Kconfig changes - sysrq tweaks" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (109 commits) Documentation/sysrq: fix inconstistent help message of sysrq key ethernet/emac/sysrq: fix inconstistent help message of sysrq key sparc/sysrq: fix inconstistent help message of sysrq key powerpc/xmon/sysrq: fix inconstistent help message of sysrq key ARM/etm/sysrq: fix inconstistent help message of sysrq key power/sysrq: fix inconstistent help message of sysrq key kgdb/sysrq: fix inconstistent help message of sysrq key lib/decompress.c: fix initconst notifier-error-inject: fix module names in Kconfig kernel/sys.c: make prctl(PR_SET_MM) generally available UAPI: remove empty Kbuild files menuconfig: print more info for symbol without prompts init/Kconfig: re-order CONFIG_EXPERT options to fix menuconfig display kconfig menu: move Virtualization drivers near other virtualization options Kconfig: consolidate CONFIG_DEBUG_STRICT_USER_COPY_CHECKS relay: use macro PAGE_ALIGN instead of FIX_SIZE kernel/relay.c: move FIX_SIZE macro into relay.c kernel/relay.c: remove unused function argument actor drivers/w1/slaves/w1_ds2760.c: fix the error handling in w1_ds2760_add_slave() drivers/w1/slaves/w1_ds2781.c: fix the error handling in w1_ds2781_add_slave() ...
2013-04-30dump_stack: unify debug information printed by show_regs()Tejun Heo1-1/+1
show_regs() is inherently arch-dependent but it does make sense to print generic debug information and some archs already do albeit in slightly different forms. This patch introduces a generic function to print debug information from show_regs() so that different archs print out the same information and it's much easier to modify what's printed. show_regs_print_info() prints out the same debug info as dump_stack() does plus task and thread_info pointers. * Archs which didn't print debug info now do. alpha, arc, blackfin, c6x, cris, frv, h8300, hexagon, ia64, m32r, metag, microblaze, mn10300, openrisc, parisc, score, sh64, sparc, um, xtensa * Already prints debug info. Replaced with show_regs_print_info(). The printed information is superset of what used to be there. arm, arm64, avr32, mips, powerpc, sh32, tile, unicore32, x86 * s390 is special in that it used to print arch-specific information along with generic debug info. Heiko and Martin think that the arch-specific extra isn't worth keeping s390 specfic implementation. Converted to use the generic version. Note that now all archs print the debug info before actual register dumps. An example BUG() dump follows. kernel BUG at /work/os/work/kernel/workqueue.c:4841! invalid opcode: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.9.0-rc1-work+ #7 Hardware name: empty empty/S3992, BIOS 080011 10/26/2007 task: ffff88007c85e040 ti: ffff88007c860000 task.ti: ffff88007c860000 RIP: 0010:[<ffffffff8234a07e>] [<ffffffff8234a07e>] init_workqueues+0x4/0x6 RSP: 0000:ffff88007c861ec8 EFLAGS: 00010246 RAX: ffff88007c861fd8 RBX: ffffffff824466a8 RCX: 0000000000000001 RDX: 0000000000000046 RSI: 0000000000000001 RDI: ffffffff8234a07a RBP: ffff88007c861ec8 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000001 R11: 0000000000000000 R12: ffffffff8234a07a R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff88007dc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: ffff88015f7ff000 CR3: 00000000021f1000 CR4: 00000000000007f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Stack: ffff88007c861ef8 ffffffff81000312 ffffffff824466a8 ffff88007c85e650 0000000000000003 0000000000000000 ffff88007c861f38 ffffffff82335e5d ffff88007c862080 ffffffff8223d8c0 ffff88007c862080 ffffffff81c47760 Call Trace: [<ffffffff81000312>] do_one_initcall+0x122/0x170 [<ffffffff82335e5d>] kernel_init_freeable+0x9b/0x1c8 [<ffffffff81c47760>] ? rest_init+0x140/0x140 [<ffffffff81c4776e>] kernel_init+0xe/0xf0 [<ffffffff81c6be9c>] ret_from_fork+0x7c/0xb0 [<ffffffff81c47760>] ? rest_init+0x140/0x140 ... v2: Typo fix in x86-32. v3: CPU number dropped from show_regs_print_info() as dump_stack_print_info() has been updated to print it. s390 specific implementation dropped as requested by s390 maintainers. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: David S. Miller <davem@davemloft.net> Acked-by: Jesper Nilsson <jesper.nilsson@axis.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Fengguang Wu <fengguang.wu@intel.com> Cc: Mike Frysinger <vapier@gentoo.org> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Sam Ravnborg <sam@ravnborg.org> Acked-by: Chris Metcalf <cmetcalf@tilera.com> [tile bits] Acked-by: Richard Kuo <rkuo@codeaurora.org> [hexagon bits] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-30dump_stack: consolidate dump_stack() implementations and unify their behaviorsTejun Heo1-13/+0
Both dump_stack() and show_stack() are currently implemented by each architecture. show_stack(NULL, NULL) dumps the backtrace for the current task as does dump_stack(). On some archs, dump_stack() prints extra information - pid, utsname and so on - in addition to the backtrace while the two are identical on other archs. The usages in arch-independent code of the two functions indicate show_stack(NULL, NULL) should print out bare backtrace while dump_stack() is used for debugging purposes when something went wrong, so it does make sense to print additional information on the task which triggered dump_stack(). There's no reason to require archs to implement two separate but mostly identical functions. It leads to unnecessary subtle information. This patch expands the dummy fallback dump_stack() implementation in lib/dump_stack.c such that it prints out debug information (taken from x86) and invokes show_stack(NULL, NULL) and drops arch-specific dump_stack() implementations in all archs except blackfin. Blackfin's dump_stack() does something wonky that I don't understand. Debug information can be printed separately by calling dump_stack_print_info() so that arch-specific dump_stack() implementation can still emit the same debug information. This is used in blackfin. This patch brings the following behavior changes. * On some archs, an extra level in backtrace for show_stack() could be printed. This is because the top frame was determined in dump_stack() on those archs while generic dump_stack() can't do that reliably. It can be compensated by inlining dump_stack() but not sure whether that'd be necessary. * Most archs didn't use to print debug info on dump_stack(). They do now. An example WARN dump follows. WARNING: at kernel/workqueue.c:4841 init_workqueues+0x35/0x505() Hardware name: empty Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.9.0-rc1-work+ #9 0000000000000009 ffff88007c861e08 ffffffff81c614dc ffff88007c861e48 ffffffff8108f50f ffffffff82228240 0000000000000040 ffffffff8234a03c 0000000000000000 0000000000000000 0000000000000000 ffff88007c861e58 Call Trace: [<ffffffff81c614dc>] dump_stack+0x19/0x1b [<ffffffff8108f50f>] warn_slowpath_common+0x7f/0xc0 [<ffffffff8108f56a>] warn_slowpath_null+0x1a/0x20 [<ffffffff8234a071>] init_workqueues+0x35/0x505 ... v2: CPU number added to the generic debug info as requested by s390 folks and dropped the s390 specific dump_stack(). This loses %ksp from the debug message which the maintainers think isn't important enough to keep the s390-specific dump_stack() implementation. dump_stack_print_info() is moved to kernel/printk.c from lib/dump_stack.c. Because linkage is per objecct file, dump_stack_print_info() living in the same lib file as generic dump_stack() means that archs which implement custom dump_stack() - at this point, only blackfin - can't use dump_stack_print_info() as that will bring in the generic version of dump_stack() too. v1 The v1 patch broke build on blackfin due to this issue. The build breakage was reported by Fengguang Wu. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: David S. Miller <davem@davemloft.net> Acked-by: Vineet Gupta <vgupta@synopsys.com> Acked-by: Jesper Nilsson <jesper.nilsson@axis.com> Acked-by: Vineet Gupta <vgupta@synopsys.com> Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> [s390 bits] Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Mike Frysinger <vapier@gentoo.org> Cc: Fengguang Wu <fengguang.wu@intel.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Sam Ravnborg <sam@ravnborg.org> Acked-by: Richard Kuo <rkuo@codeaurora.org> [hexagon bits] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-30Merge tag 'pm+acpi-3.10-rc1' of ↵Linus Torvalds4-303/+0
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management and ACPI updates from Rafael J Wysocki: - ARM big.LITTLE cpufreq driver from Viresh Kumar. - exynos5440 cpufreq driver from Amit Daniel Kachhap. - cpufreq core cleanup and code consolidation from Viresh Kumar and Stratos Karafotis. - cpufreq scalability improvement from Nathan Zimmer. - AMD "frequency sensitivity feedback" powersave bias for the ondemand cpufreq governor from Jacob Shin. - cpuidle code consolidation and cleanups from Daniel Lezcano. - ARM OMAP cpuidle fixes from Santosh Shilimkar and Daniel Lezcano. - ACPICA fixes and other improvements from Bob Moore, Jung-uk Kim, Lv Zheng, Yinghai Lu, Tang Chen, Colin Ian King, and Linn Crosetto. - ACPI core updates related to hotplug from Toshi Kani, Paul Bolle, Yasuaki Ishimatsu, and Rafael J Wysocki. - Intel Lynxpoint LPSS (Low-Power Subsystem) support improvements from Rafael J Wysocki and Andy Shevchenko. * tag 'pm+acpi-3.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (192 commits) cpufreq: Revert incorrect commit 5800043 cpufreq: MAINTAINERS: Add co-maintainer cpuidle: add maintainer entry ACPI / thermal: do not always return THERMAL_TREND_RAISING for active trip points ARM: s3c64xx: cpuidle: use init/exit common routine cpufreq: pxa2xx: initialize variables ACPI: video: correct acpi_video_bus_add error processing SH: cpuidle: use init/exit common routine ARM: S5pv210: compiling issue, ARM_S5PV210_CPUFREQ needs CONFIG_CPU_FREQ_TABLE=y ACPI: Fix wrong parameter passed to memblock_reserve cpuidle: fix comment format pnp: use %*phC to dump small buffers isapnp: remove debug leftovers ARM: imx: cpuidle: use init/exit common routine ARM: davinci: cpuidle: use init/exit common routine ARM: kirkwood: cpuidle: use init/exit common routine ARM: calxeda: cpuidle: use init/exit common routine ARM: tegra: cpuidle: use init/exit common routine for tegra3 ARM: tegra: cpuidle: use init/exit common routine for tegra2 ARM: OMAP4: cpuidle: use init/exit common routine ...
2013-04-30Merge branch 'smp-hotplug-for-linus' of ↵Linus Torvalds2-34/+16
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull SMP/hotplug changes from Ingo Molnar: "This is a pretty large, multi-arch series unifying and generalizing the various disjunct pieces of idle routines that architectures have historically copied from each other and have grown in random, wildly inconsistent and sometimes buggy directions: 101 files changed, 455 insertions(+), 1328 deletions(-) this went through a number of review and test iterations before it was committed, it was tested on various architectures, was exposed to linux-next for quite some time - nevertheless it might cause problems on architectures that don't read the mailing lists and don't regularly test linux-next. This cat herding excercise was motivated by the -rt kernel, and was brought to you by Thomas "the Whip" Gleixner." * 'smp-hotplug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (40 commits) idle: Remove GENERIC_IDLE_LOOP config switch um: Use generic idle loop ia64: Make sure interrupts enabled when we "safe_halt()" sparc: Use generic idle loop idle: Remove unused ARCH_HAS_DEFAULT_IDLE bfin: Fix typo in arch_cpu_idle() xtensa: Use generic idle loop x86: Use generic idle loop unicore: Use generic idle loop tile: Use generic idle loop tile: Enter idle with preemption disabled sh: Use generic idle loop score: Use generic idle loop s390: Use generic idle loop powerpc: Use generic idle loop parisc: Use generic idle loop openrisc: Use generic idle loop mn10300: Use generic idle loop mips: Use generic idle loop microblaze: Use generic idle loop ...
2013-04-29early_printk: consolidate random copies of identical codeThomas Gleixner1-6/+6
The early console implementations are the same all over the place. Move the print function to kernel/printk and get rid of the copies. [akpm@linux-foundation.org: arch/mips/kernel/early_printk.c needs kernel.h for va_list] [paul.gortmaker@windriver.com: sh4: make the bios early console support depend on EARLY_PRINTK] Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Russell King <linux@arm.linux.org.uk> Acked-by: Mike Frysinger <vapier@gentoo.org> Cc: Michal Simek <monstr@monstr.eu> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mundt <lethal@linux-sh.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Richard Weinberger <richard@nod.at> Reviewed-by: Ingo Molnar <mingo@kernel.org> Tested-by: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-29mips: Don't use create_proc_read_entry()David Howells1-38/+26
Don't use create_proc_read_entry() as that is deprecated, but rather use proc_create_data() and seq_file instead. Signed-off-by: David Howells <dhowells@redhat.com> cc: Ralf Baechle <ralf@linux-mips.org> cc: linux-mips@linux-mips.org Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-04-28Merge branch 'pm-cpufreq'Rafael J. Wysocki4-303/+0
* pm-cpufreq: (57 commits) cpufreq: MAINTAINERS: Add co-maintainer cpufreq: pxa2xx: initialize variables ARM: S5pv210: compiling issue, ARM_S5PV210_CPUFREQ needs CONFIG_CPU_FREQ_TABLE=y cpufreq: cpu0: Put cpu parent node after using it cpufreq: ARM big LITTLE: Adapt to latest cpufreq updates cpufreq: ARM big LITTLE: put DT nodes after using them cpufreq: Don't call __cpufreq_governor() for drivers without target() cpufreq: exynos5440: Protect OPP search calls with RCU lock cpufreq: dbx500: Round to closest available freq cpufreq: Call __cpufreq_governor() with correct policy->cpus mask cpufreq / intel_pstate: Optimize intel_pstate_set_policy cpufreq: OMAP: instantiate omap-cpufreq as a platform_driver arm: exynos: Enable OPP library support for exynos5440 cpufreq: exynos: Remove error return even if no soc is found cpufreq: exynos: Add cpufreq driver for exynos5440 cpufreq: AMD "frequency sensitivity feedback" powersave bias for ondemand governor cpufreq: ondemand: allow custom powersave_bias_target handler to be registered cpufreq: convert cpufreq_driver to using RCU cpufreq: powerpc/platforms/cell: move cpufreq driver to drivers/cpufreq cpufreq: sparc: move cpufreq driver to drivers/cpufreq ... Conflicts: MAINTAINERS (with commit a8e39c3 from pm-cpuidle) drivers/cpufreq/cpufreq_governor.h (with commit beb0ff3)
2013-04-11MIPS: Avoid overoptimization by GCC.Ralf Baechle1-2/+1
Without this, it's possible that LTO will discard the calls to set_except_vector() in the probe for the DADDI overflow bug resulting in a kernel crash like this: [...] Mount-cache hash table entries: 256 Checking for the daddi bug... Integer overflow[#1]: Cpu 0 $ 0 : 0000000000000000 0000000010008ce1 0000000000000001 0000000000000000 $ 4 : 7fffffffffffedcd ffffffff81410000 0000000000000030 000000000000003f [...] There are other similar places in the kernel so we've just been lucky that GCC's been tolerant. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-04-11MIPS: Make tlb exception handler definitions and declarations match.Ralf Baechle1-4/+4
The code was written as it is because it's more expressive, a bit easier. But it's always been dirty, if not a bug. But we can't cheat with LTO compilers, so this results in: [...] LDFINAL vmlinux.o In file included from arch/mips/kernel/topology.c:604:0, from arch/mips/kernel/time.c:212, from arch/mips/kernel/syscall.c:300, from arch/mips/kernel/signal.c:853, from arch/mips/kernel/setup.c:1030, from arch/mips/kernel/reset.c:354, from arch/mips/kernel/ptrace.c:562, from arch/mips/kernel/process.c:770, from arch/mips/kernel/irq.c:350, from arch/mips/kernel/branch.c:321, from arch/mips/kernel/cpu-probe.c:1370, from /fluff/home/ralf/src/linux/lto/linux-misc/arch/mips/include/asm/thread_info.h:345, from arch/mips/sgi-ip22/ip22-gio.c:660, from /fluff/home/ralf/src/linux/lto/linux-misc/arch/mips/include/asm/sgialib.h:219, from arch/mips/sgi-ip22/ip22-reset.c:224, from /fluff/home/ralf/src/linux/lto/linux-misc/arch/mips/include/asm/paccess.h:116, from arch/mips/sgi-ip22/ip22-nvram.c:334, from include/linux/kernel_stat.h:79, from arch/mips/sgi-ip22/ip22-int.c:592, from arch/mips/sgi-ip22/ip22-hpc.c:470, from arch/mips/sgi-ip22/ip22-mc.c:135, from init/init_task.c:54, from init/calibrate.c:744, from init/noinitramfs.c:62, from init/do_mounts.c:573, from init/version.c:1009, from init/main.c:777, from :729: arch/mips/kernel/traps.c:63:49: error: variable ‘handle_tlbl’ redeclared as function In file included from arch/mips/mm/page.c:310:0, from arch/mips/mm/mmap.c:208, from arch/mips/mm/init.c:641, from arch/mips/mm/gup.c:811, from arch/mips/mm/fault.c:659, from include/linux/module.h:682, from arch/mips/mm/dma-default.c:161, from /fluff/home/ralf/src/linux/lto/linux-misc/arch/mips/include/asm/thread_info.h:397, from arch/mips/kernel/i8253.c:538, from arch/mips/kernel/proc.c:145, from arch/mips/kernel/irq_cpu.c:129, from arch/mips/kernel/i8259.c:229, from include/uapi/linux/elf.h:251, from arch/mips/kernel/mips_ksyms.c:129, from /fluff/home/ralf/src/linux/lto/linux-misc/arch/mips/include/asm/time.h:50, from arch/mips/kernel/cevt-r4k.c:90, from arch/mips/kernel/vdso.c:136, from /fluff/home/ralf/src/linux/lto/linux-misc/arch/mips/include/asm/thread_info.h:351, from arch/mips/kernel/unaligned.c:809, from arch/mips/kernel/traps.c:1720, from arch/mips/kernel/topology.c:684, from arch/mips/kernel/time.c:212, from arch/mips/kernel/syscall.c:300, from arch/mips/kernel/signal.c:853, from arch/mips/kernel/setup.c:1030, from arch/mips/kernel/reset.c:354, from arch/mips/kernel/ptrace.c:562, from arch/mips/kernel/process.c:770, from arch/mips/kernel/irq.c:350, from arch/mips/kernel/branch.c:321, from arch/mips/kernel/cpu-probe.c:1370, from /fluff/home/ralf/src/linux/lto/linux-misc/arch/mips/include/asm/thread_info.h:345, from arch/mips/sgi-ip22/ip22-gio.c:660, from /fluff/home/ralf/src/linux/lto/linux-misc/arch/mips/include/asm/sgialib.h:219, from arch/mips/sgi-ip22/ip22-reset.c:224, from /fluff/home/ralf/src/linux/lto/linux-misc/arch/mips/include/asm/paccess.h:116, from arch/mips/sgi-ip22/ip22-nvram.c:334, from include/linux/kernel_stat.h:79, from arch/mips/sgi-ip22/ip22-int.c:592, from arch/mips/sgi-ip22/ip22-hpc.c:470, from arch/mips/sgi-ip22/ip22-mc.c:135, from init/init_task.c:54, from init/calibrate.c:744, from init/noinitramfs.c:62, from init/do_mounts.c:573, from init/version.c:1009, from init/main.c:777, from :729: arch/mips/mm/tlbex.c:1448:5: note: previously declared here In file included from arch/mips/kernel/topology.c:604:0, from arch/mips/kernel/time.c:212, from arch/mips/kernel/syscall.c:300, from arch/mips/kernel/signal.c:853, from arch/mips/kernel/setup.c:1030, from arch/mips/kernel/reset.c:354, from arch/mips/kernel/ptrace.c:562, from arch/mips/kernel/process.c:770, from arch/mips/kernel/irq.c:350, from arch/mips/kernel/branch.c:321, from arch/mips/kernel/cpu-probe.c:1370, from /fluff/home/ralf/src/linux/lto/linux-misc/arch/mips/include/asm/thread_info.h:345, from arch/mips/sgi-ip22/ip22-gio.c:660, from /fluff/home/ralf/src/linux/lto/linux-misc/arch/mips/include/asm/sgialib.h:219, from arch/mips/sgi-ip22/ip22-reset.c:224, from /fluff/home/ralf/src/linux/lto/linux-misc/arch/mips/include/asm/paccess.h:116, from arch/mips/sgi-ip22/ip22-nvram.c:334, from include/linux/kernel_stat.h:79, from arch/mips/sgi-ip22/ip22-int.c:592, from arch/mips/sgi-ip22/ip22-hpc.c:470, from arch/mips/sgi-ip22/ip22-mc.c:135, from init/init_task.c:54, from init/calibrate.c:744, from init/noinitramfs.c:62, from init/do_mounts.c:573, from init/version.c:1009, from init/main.c:777, from :729: arch/mips/kernel/traps.c:62:49: error: variable ‘handle_tlbm’ redeclared as function In file included from arch/mips/mm/page.c:310:0, from arch/mips/mm/mmap.c:208, from arch/mips/mm/init.c:641, from arch/mips/mm/gup.c:811, from arch/mips/mm/fault.c:659, from include/linux/module.h:682, from arch/mips/mm/dma-default.c:161, from /fluff/home/ralf/src/linux/lto/linux-misc/arch/mips/include/asm/thread_info.h:397, from arch/mips/kernel/i8253.c:538, from arch/mips/kernel/proc.c:145, from arch/mips/kernel/irq_cpu.c:129, from arch/mips/kernel/i8259.c:229, from include/uapi/linux/elf.h:251, from arch/mips/kernel/mips_ksyms.c:129, from /fluff/home/ralf/src/linux/lto/linux-misc/arch/mips/include/asm/time.h:50, from arch/mips/kernel/cevt-r4k.c:90, from arch/mips/kernel/vdso.c:136, from /fluff/home/ralf/src/linux/lto/linux-misc/arch/mips/include/asm/thread_info.h:351, from arch/mips/kernel/unaligned.c:809, from arch/mips/kernel/traps.c:1720, from arch/mips/kernel/topology.c:684, from arch/mips/kernel/time.c:212, from arch/mips/kernel/syscall.c:300, from arch/mips/kernel/signal.c:853, from arch/mips/kernel/setup.c:1030, from arch/mips/kernel/reset.c:354, from arch/mips/kernel/ptrace.c:562, from arch/mips/kernel/process.c:770, from arch/mips/kernel/irq.c:350, from arch/mips/kernel/branch.c:321, from arch/mips/kernel/cpu-probe.c:1370, from /fluff/home/ralf/src/linux/lto/linux-misc/arch/mips/include/asm/thread_info.h:345, from arch/mips/sgi-ip22/ip22-gio.c:660, from /fluff/home/ralf/src/linux/lto/linux-misc/arch/mips/include/asm/sgialib.h:219, from arch/mips/sgi-ip22/ip22-reset.c:224, from /fluff/home/ralf/src/linux/lto/linux-misc/arch/mips/include/asm/paccess.h:116, from arch/mips/sgi-ip22/ip22-nvram.c:334, from include/linux/kernel_stat.h:79, from arch/mips/sgi-ip22/ip22-int.c:592, from arch/mips/sgi-ip22/ip22-hpc.c:470, from arch/mips/sgi-ip22/ip22-mc.c:135, from init/init_task.c:54, from init/calibrate.c:744, from init/noinitramfs.c:62, from init/do_mounts.c:573, from init/version.c:1009, from init/main.c:777, from :729: arch/mips/mm/tlbex.c:1450:5: note: previously declared here In file included from arch/mips/kernel/topology.c:604:0, from arch/mips/kernel/time.c:212, from arch/mips/kernel/syscall.c:300, from arch/mips/kernel/signal.c:853, from arch/mips/kernel/setup.c:1030, from arch/mips/kernel/reset.c:354, from arch/mips/kernel/ptrace.c:562, from arch/mips/kernel/process.c:770, from arch/mips/kernel/irq.c:350, from arch/mips/kernel/branch.c:321, from arch/mips/kernel/cpu-probe.c:1370, from /fluff/home/ralf/src/linux/lto/linux-misc/arch/mips/include/asm/thread_info.h:345, from arch/mips/sgi-ip22/ip22-gio.c:660, from /fluff/home/ralf/src/linux/lto/linux-misc/arch/mips/include/asm/sgialib.h:219, from arch/mips/sgi-ip22/ip22-reset.c:224, from /fluff/home/ralf/src/linux/lto/linux-misc/arch/mips/include/asm/paccess.h:116, from arch/mips/sgi-ip22/ip22-nvram.c:334, from include/linux/kernel_stat.h:79, from arch/mips/sgi-ip22/ip22-int.c:592, from arch/mips/sgi-ip22/ip22-hpc.c:470, from arch/mips/sgi-ip22/ip22-mc.c:135, from init/init_task.c:54, from init/calibrate.c:744, from init/noinitramfs.c:62, from init/do_mounts.c:573, from init/version.c:1009, from init/main.c:777, from :729: arch/mips/kernel/traps.c:64:49: error: variable ‘handle_tlbs’ redeclared as function In file included from arch/mips/mm/page.c:310:0, from arch/mips/mm/mmap.c:208, from arch/mips/mm/init.c:641, from arch/mips/mm/gup.c:811, from arch/mips/mm/fault.c:659, from include/linux/module.h:682, from arch/mips/mm/dma-default.c:161, from /fluff/home/ralf/src/linux/lto/linux-misc/arch/mips/include/asm/thread_info.h:397, from arch/mips/kernel/i8253.c:538, from arch/mips/kernel/proc.c:145, from arch/mips/kernel/irq_cpu.c:129, from arch/mips/kernel/i8259.c:229, from include/uapi/linux/elf.h:251, from arch/mips/kernel/mips_ksyms.c:129, from /fluff/home/ralf/src/linux/lto/linux-misc/arch/mips/include/asm/time.h:50, from arch/mips/kernel/cevt-r4k.c:90, from arch/mips/kernel/vdso.c:136, from /fluff/home/ralf/src/linux/lto/linux-misc/arch/mips/include/asm/thread_info.h:351, from arch/mips/kernel/unaligned.c:809, from arch/mips/kernel/traps.c:1720, from arch/mips/kernel/topology.c:684, from arch/mips/kernel/time.c:212, from arch/mips/kernel/syscall.c:300, from arch/mips/kernel/signal.c:853, from arch/mips/kernel/setup.c:1030, from arch/mips/kernel/reset.c:354, from arch/mips/kernel/ptrace.c:562, from arch/mips/kernel/process.c:770, from arch/mips/kernel/irq.c:350, from arch/mips/kernel/branch.c:321, from arch/mips/kernel/cpu-probe.c:1370, from /fluff/home/ralf/src/linux/lto/linux-misc/arch/mips/include/asm/thread_info.h:345, from arch/mips/sgi-ip22/ip22-gio.c:660, from /fluff/home/ralf/src/linux/lto/linux-misc/arch/mips/include/asm/sgialib.h:219, from arch/mips/sgi-ip22/ip22-reset.c:224, from /fluff/home/ralf/src/linux/lto/linux-misc/arch/mips/include/asm/paccess.h:116, from arch/mips/sgi-ip22/ip22-nvram.c:334, from include/linux/kernel_stat.h:79, from arch/mips/sgi-ip22/ip22-int.c:592, from arch/mips/sgi-ip22/ip22-hpc.c:470, from arch/mips/sgi-ip22/ip22-mc.c:135, from init/init_task.c:54, from init/calibrate.c:744, from init/noinitramfs.c:62, from init/do_mounts.c:573, from init/version.c:1009, from init/main.c:777, from :729: arch/mips/mm/tlbex.c:1449:5: note: previously declared here lto1: fatal error: errors during merging of translation units compilation terminated. lto-wrapper: /usr/bin/mips-linux-gcc returned 1 exit status /usr/lib64/gcc/mips-linux/4.7.1/../../../../mips-linux/bin/ld: lto-wrapper failed collect2: error: ld returned 1 exit status make: *** [vmlinux] Error 1 Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-04-10cpufreq: mips: move cpufreq driver to drivers/cpufreqViresh Kumar4-296/+0
This patch moves cpufreq driver of MIPS architecture to drivers/cpufreq. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: John Crispin <blogic@openwrt.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-04-08mips: Use generic idle loopThomas Gleixner2-34/+16
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Paul McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Reviewed-by: Cc: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Ralf Baechle <ralf@linux-mips.org> Link: http://lkml.kernel.org/r/20130321215234.754954871@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2013-04-05Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds3-9/+10
Pull MIPS fixes from Ralf Baechle: "Fixes for a number of small glitches in various corners of the MIPS tree. No particular areas is standing out. With this applied all MIPS defconfigs are building fine. No merge conflicts are expected." * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: MIPS: Delete definition of SA_RESTORER. MIPS: Fix ISA level which causes secondary cache init bypassing and more MIPS: Fix build error cavium-octeon without CONFIG_SMP MIPS: Kconfig: Rename SNIPROM too MIPS: Alchemy: Fix typo "CONFIG_DEBUG_PCI" MIPS: Unbreak function tracer for 64-bit kernel.
2013-04-05MIPS: Fix ISA level which causes secondary cache init bypassing and moreDeng-Cheng Zhu2-5/+3
The commit a96102be70 introduced set_isa() where compatible ISA info is also set aside from the one gets passed in. It means, for example, 1004K will have MIPS_CPU_ISA_M32R2/M32R1/II/I flags. This leads to things like the following inappropriate: if (c->isa_level == MIPS_CPU_ISA_M32R1 || c->isa_level == MIPS_CPU_ISA_M32R2 || c->isa_level == MIPS_CPU_ISA_M64R1 || c->isa_level == MIPS_CPU_ISA_M64R2) This patch fixes it. Signed-off-by: Deng-Cheng Zhu <dengcheng.zhu@imgtec.com> Cc: Steven J. Hill <Steven.Hill@imgtec.com> Cc: linux-mips@linux-mips.org Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-04-05MIPS: Unbreak function tracer for 64-bit kernel.David Daney1-4/+7
Commit 58b69401c797 [MIPS: Function tracer: Fix broken function tracing] completely broke the function tracer for 64-bit kernels. The symptom is a system hang very early in the boot process. The fix: Remove/fix $sp adjustments for 64-bit case. Signed-off-by: David Daney <david.daney@cavium.com> Cc: linux-mips@linux-mips.org Cc: Al Cooper <alcooperx@gmail.com> Cc: viric@viric.name Cc: stable@vger.kernel.org # 3.8.x Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-04-02cpufreq: Don't check if cpu is online/offline for cpufreq callbacksViresh Kumar1-6/+0
cpufreq layer doesn't call cpufreq driver's callback for any offline CPU and so checking that isn't useful. Lets get rid of it. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-04-02cpufreq: Notify all policy->cpus in cpufreq_notify_transition()Viresh Kumar1-3/+2
policy->cpus contains all online cpus that have single shared clock line. And their frequencies are always updated together. Many SMP system's cpufreq drivers take care of this in individual drivers but the best place for this code is in cpufreq core. This patch modifies cpufreq_notify_transition() to notify frequency change for all cpus in policy->cpus and hence updates all users of this API. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Stephen Warren <swarren@nvidia.com> Tested-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-03-19MIPS: Fix code generation for non-DSP capable CPUsFlorian Fainelli1-19/+6
Commit 32a7ede (MIPS: dsp: Add assembler support for DSP ASEs) has enabled the use of DSP ASE specific instructions such as rddsp and wrdsp under the idea that all code path that will make use of these two instructions are properly checking for cpu_has_dsp to ensure that the particular CPU we are running on *actually* supports DSP ASE. This commit actually causes the following oops on QEMU Malta emulating a MIPS 24Kc without the DSP ASE implemented: [ 7.960000] Reserved instruction in kernel [ 7.960000] Cpu 0 [ 7.960000] $ 0 : 00000000 00000000 00000014 00000005 [ 7.960000] $ 4 : 8fc2de48 00000001 00000000 8f59ddb0 [ 7.960000] $ 8 : 8f5ceec4 00000018 00000c00 00800000 [ 7.960000] $12 : 00000100 00000200 00000000 00457b84 [ 7.960000] $16 : 00000000 8fc2ba78 8f4ec980 00000001 [ 7.960000] $20 : 80418f90 00000000 00000000 000002dd [ 7.960000] $24 : 0000009c 7730d7b8 [ 7.960000] $28 : 8f59c000 8f59dd38 00000001 80104248 [ 7.960000] Hi : 0000001d [ 7.960000] Lo : 0000000b [ 7.960000] epc : 801041ec thread_saved_pc+0x2c/0x38 [ 7.960000] Not tainted [ 7.960000] ra : 80104248 get_wchan+0x48/0xac [ 7.960000] Status: 1000b703 KERNEL EXL IE [ 7.960000] Cause : 10800028 [ 7.960000] PrId : 00019300 (MIPS 24Kc) [ 7.960000] Modules linked in: [ 7.960000] Process killall (pid: 1574, threadinfo=8f59c000, task=8fd14558, tls=773aa440) [ 7.960000] Stack : 8fc2ba78 8012b008 0000000c 0000001d 00000000 00000000 8f58a380 8f58a380 8fc2ba78 80202668 8f59de78 8f468600 8f59de28 801b2a3c 8f59df00 8f98ba20 74696e69 8f468600 8f59de28 801b7308 0081c007 00000000 00000000 00000000 00000000 00000000 00000000 00000000 8fc2bbb4 00000001 0000001d 0000000b 77f038cc 7fe80648 ffffffff ffffffff 00000000 00000001 0016e000 00000000 ... [ 7.960000] Call Trace: [ 7.960000] [<801041ec>] thread_saved_pc+0x2c/0x38 [ 7.960000] [<80104248>] get_wchan+0x48/0xac The disassembly of thread_saved_pc points to the following: 000006d0 <thread_saved_pc>: 6d0: 8c820208 lw v0,520(a0) 6d4: 3c030000 lui v1,0x0 6d8: 24630000 addiu v1,v1,0 6dc: 10430008 beq v0,v1,700 <thread_saved_pc+0x30> 6e0: 00000000 nop 6e4: 3c020000 lui v0,0x0 6e8: 8c43000c lw v1,12(v0) 6ec: 04620004 bltzl v1,700 <thread_saved_pc+0x30> 6f0: 00001021 move v0,zero 6f4: 8c840200 lw a0,512(a0) 6f8: 00031080 sll v0,v1,0x2 6fc: 7c44100a lwx v0,a0(v0) <------------ 700: 03e00008 jr ra 704: 00000000 nop If we specifically disable -mdsp/-mdspr2 for arch/mips/kernel/process.o, we get the following (non-crashing) assembly: 00000708 <thread_saved_pc>: 708: 8c820208 lw v0,520(a0) 70c: 3c030000 lui v1,0x0 710: 24630000 addiu v1,v1,0 714: 10430009 beq v0,v1,73c <thread_saved_pc+0x34> 718: 00000000 nop 71c: 3c020000 lui v0,0x0 720: 8c42000c lw v0,12(v0) 724: 04420005 bltzl v0,73c <thread_saved_pc+0x34> 728: 00001021 move v0,zero 72c: 8c830200 lw v1,512(a0) 730: 00021080 sll v0,v0,0x2 734: 00431021 addu v0,v0,v1 738: 8c420000 lw v0,0(v0) 73c: 03e00008 jr ra 740: 00000000 nop The specific line that leads a different assembly being produced is: unsigned long thread_saved_pc(struct task_struct *tsk) ... return ((unsigned long *)t->reg29)[schedule_mfi.pc_offset]; <--- The problem here is that the compiler was given the right to use DSP instructions with the -mdsp / -mdspr2 command-line switches and performed some optimization for us and used DSP ASE instructions where we are not checking that the running CPU actually supports DSP ASE. This patch fixes the issue by partially reverting commit 32a7ede for arch/mips/kernel/Makefile in order to remove the -mdsp / -mdspr2 compiler command-line switches such that we are now guaranteed that the compiler will not optimize using DSP ASE reserved instructions. We also need to fixup the rddsp/wrdsp and m{t,h}{hi,lo}{0,1,2,3} macros in arch/mips/include/asm/mipsregs.h to tell the assembler that we are going to explicitely use DSP ASE reserved instructions. The comment in arch/mips/kernel/Makefile is also updated to reflect that. Signed-off-by: Florian Fainelli <florian@openwrt.org> Acked-by: Steven J. Hill <Steven.Hill@imgtec.com> Cc: linux-mips@linux-mips.org Cc: blogic@openwrt.org Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-12 20:54:00 +0000