summaryrefslogtreecommitdiffstats
path: root/arch/mips/jz4740
AgeCommit message (Collapse)AuthorFilesLines
2017-02-14MIPS: Audit and remove any unnecessary uses of module.hPaul Gortmaker3-3/+3
Historically a lot of these existed because we did not have a distinction between what was modular code and what was providing support to modules via EXPORT_SYMBOL and friends. That changed when we forked out support for the latter into the export.h file. This means we should be able to reduce the usage of module.h in code that is obj-y Makefile or bool Kconfig. In the case of some code where it is modular, we can extend that to also include files that are building basic support functionality but not related to loading or registering the final module; such files also have no need whatsoever for module.h The advantage in removing such instances is that module.h itself sources about 15 other headers; adding significantly to what we feed cpp, and it can obscure what headers we are effectively using. Since module.h might have been the implicit source for init.h (for __init) and for export.h (for EXPORT_SYMBOL) we consider each instance for the presence of either and replace/add as needed. Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code. Build coverage of all the mips defconfigs revealed the module.h header was masking a couple of implicit include instances, so we add the appropriate headers there. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: David Daney <david.daney@cavium.com> Cc: John Crispin <john@phrozen.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: "Steven J. Hill" <steven.hill@cavium.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/15131/ [james.hogan@imgtec.com: Preserve sort order where it already exists] Signed-off-by: James Hogan <james.hogan@imgtec.com>
2016-12-25clocksource: Use a plain u64 instead of cycle_tThomas Gleixner1-1/+1
There is no point in having an extra type for extra confusion. u64 is unambiguous. Conversion was done with the following coccinelle script: @rem@ @@ -typedef u64 cycle_t; @fix@ typedef cycle_t; @@ -cycle_t +u64 Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: John Stultz <john.stultz@linaro.org>
2016-11-05MIPS: jz4740: Remove obsolete codePaul Cercueil2-84/+0
This commit removes two things: - The platform_device that corresponds to the RTC driver, since we now probe this driver from devicetree; - The platform power-off code, since all the jz4740-based platforms are now using the jz4740-rtc driver as the system power controller. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Acked-by: Maarten ter Huurne <maarten@treewalker.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-11-05MIPS: qi_lb60: Probe RTC driver from DT and use it as power controllerPaul Cercueil1-1/+0
Since we already have a devicetree node for the jz4740-rtc driver, we don't have to probe it from platform code. Besides, using the jz4740-rtc driver as the power controller for the qi_lb60 platform allows us to remove the jz4740 platform power-off code, since this is the only jz4740-based board upstream. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Acked-by: Maarten ter Huurne <maarten@treewalker.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-08-04tree-wide: replace config_enabled() with IS_ENABLED()Masahiro Yamada1-1/+1
The use of config_enabled() against config options is ambiguous. In practical terms, config_enabled() is equivalent to IS_BUILTIN(), but the author might have used it for the meaning of IS_ENABLED(). Using IS_ENABLED(), IS_BUILTIN(), IS_MODULE() etc. makes the intention clearer. This commit replaces config_enabled() with IS_ENABLED() where possible. This commit is only touching bool config options. I noticed two cases where config_enabled() is used against a tristate option: - config_enabled(CONFIG_HWMON) [ drivers/net/wireless/ath/ath10k/thermal.c ] - config_enabled(CONFIG_BACKLIGHT_CLASS_DEVICE) [ drivers/gpu/drm/gma500/opregion.c ] I did not touch them because they should be converted to IS_BUILTIN() in order to keep the logic, but I was not sure it was the authors' intention. Link: http://lkml.kernel.org/r/1465215656-20569-1-git-send-email-yamada.masahiro@socionext.com Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Kees Cook <keescook@chromium.org> Cc: Stas Sergeev <stsp@list.ru> Cc: Matt Redfearn <matt.redfearn@imgtec.com> Cc: Joshua Kinard <kumba@gentoo.org> Cc: Jiri Slaby <jslaby@suse.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Borislav Petkov <bp@suse.de> Cc: Markos Chandras <markos.chandras@imgtec.com> Cc: "Dmitry V. Levin" <ldv@altlinux.org> Cc: yu-cheng yu <yu-cheng.yu@intel.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: Brian Gerst <brgerst@gmail.com> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Will Drewry <wad@chromium.org> Cc: Nikolay Martynov <mar.kolya@gmail.com> Cc: Huacai Chen <chenhc@lemote.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Cc: Rafal Milecki <zajec5@gmail.com> Cc: James Cowgill <James.Cowgill@imgtec.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Alex Smith <alex.smith@imgtec.com> Cc: Adam Buchbinder <adam.buchbinder@gmail.com> Cc: Qais Yousef <qais.yousef@imgtec.com> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Mikko Rapeli <mikko.rapeli@iki.fi> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Brian Norris <computersforpeace@gmail.com> Cc: Hidehiro Kawai <hidehiro.kawai.ez@hitachi.com> Cc: "Luis R. Rodriguez" <mcgrof@do-not-panic.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Ingo Molnar <mingo@redhat.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Roland McGrath <roland@hack.frob.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Kalle Valo <kvalo@qca.qualcomm.com> Cc: Viresh Kumar <viresh.kumar@linaro.org> Cc: Tony Wu <tung7970@gmail.com> Cc: Huaitong Han <huaitong.han@intel.com> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Juergen Gross <jgross@suse.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andrea Gelmini <andrea.gelmini@gelma.net> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Rabin Vincent <rabin@rab.in> Cc: "Maciej W. Rozycki" <macro@imgtec.com> Cc: David Daney <david.daney@cavium.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-06-23mips: Remove unnecessary of_platform_populate with default match tableKefeng Wang1-8/+0
After patch "of/platform: Add common method to populate default bus", it is possible for arch code to remove unnecessary callers of of_platform_populate with default match table. Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Alban Bedel <albeu@free.fr> Cc: Paul Burton <paul.burton@imgtec.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: Joshua Henderson <joshua.henderson@microchip.com> Cc: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com> Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by: Rob Herring <robh@kernel.org>
2016-05-24Merge tag 'for-linus-20160523' of git://git.infradead.org/linux-mtdLinus Torvalds1-36/+51
Pull MTD updates from Brian Norris: "First cycle with Boris as NAND maintainer! Many (most) bullets stolen from him. Generic: - Migrated NAND LED trigger to be a generic MTD trigger NAND: - Introduction of the "ECC algorithm" concept, to avoid overloading the ECC mode field too much more - Replaced the nand_ecclayout infrastructure with something a little more flexible (finally!) and future proof - Rework of the OMAP GPMC and NAND drivers; the TI folks pulled some of this into their own tree as well - Prepare the sunxi NAND driver to receive DMA support - Handle bitflips in erased pages on GPMI revisions that do not support this in hardware. SPI NOR: - Start using the spi_flash_read() API for SPI drivers that support it (i.e., SPI drivers with special memory-mapped flash modes) And other small scattered improvments" * tag 'for-linus-20160523' of git://git.infradead.org/linux-mtd: (155 commits) mtd: spi-nor: support GigaDevice gd25lq64c mtd: nand_bch: fix spelling of "probably" mtd: brcmnand: respect ECC algorithm set by NAND subsystem gpmi-nand: Handle ECC Errors in erased pages Documentation: devicetree: deprecate "soft_bch" nand-ecc-mode value mtd: nand: add support for "nand-ecc-algo" DT property mtd: mtd: drop NAND_ECC_SOFT_BCH enum value mtd: drop support for NAND_ECC_SOFT_BCH as "soft_bch" mapping mtd: nand: read ECC algorithm from the new field mtd: nand: fsmc: validate ECC setup by checking algorithm directly mtd: nand: set ECC algorithm to Hamming on fallback staging: mt29f_spinand: set ECC algorithm explicitly CRIS v32: nand: set ECC algorithm explicitly mtd: nand: atmel: set ECC algorithm explicitly mtd: nand: davinci: set ECC algorithm explicitly mtd: nand: bf5xx: set ECC algorithm explicitly mtd: nand: omap2: Fix high memory dma prefetch transfer mtd: nand: omap2: Start dma request before enabling prefetch mtd: nandsim: add __init attribute mtd: nand: move of_get_nand_xxx() helpers into nand_base.c ...
2016-05-13MIPS: JZ4740: Probe OHCI platform device via DTMaarten ter Huurne1-25/+0
The DT fragment will select the ohci-platform driver, since that can handle the JZ4740 OHCI just fine. While I don't have a JZ4740-based board with anything connected to the USB host controller, I did test the generic OHCI driver successfully on a JZ4770-based board. The device is disabled by default; boards that want to use it can override the "status" property. The mass-production Qi LB60 boards don't use the USB host controller. Signed-off-by: Maarten ter Huurne <maarten@treewalker.org> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Paul Cercueil <paul@crapouillou.net> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/13104/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: JZ4740: Qi LB60: Remove support for AVT2 variantMaarten ter Huurne1-50/+2
AVT2 was a prototype board of which about 5 were made, none of which are in use anymore. Signed-off-by: Maarten ter Huurne <maarten@treewalker.org> Acked-by: Lars-Peter Clausen <lars@metafoo.de> Cc: Paul Cercueil <paul@crapouillou.net> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/13103/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-05mtd: nand: jz4740: switch to mtd_ooblayout_opsBoris Brezillon1-36/+51
Implementing the mtd_ooblayout_ops interface is the new way of exposing ECC/OOB layout to MTD users. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Acked-by: Lars-Peter Clausen <lars@metafoo.de>
2016-02-19MIPS: jz4740: use gpiochip data pointerLinus Walleij1-4/+6
This makes the driver use the data pointer added to the gpio_chip to store a pointer to the state container instead of relying on container_of(). Cc: linux-mips@linux-mips.org Acked-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-02-19MIPS: jz4740: Fix surviving instance of irq_to_gpio()Ralf Baechle1-1/+1
This is fallout from commit 832f5dacfa0b ("MIPS: Remove all the uses of custom gpio.h"). Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Suggested-by: Lars-Peter Clausen <lars@metafoo.de>
2015-10-26MIPS: JZ4740: Remove unused linux/leds_pwm.h includeThierry Reding1-2/+0
The board code never sets up a leds-pwm device, so including the header is not necessary. Signed-off-by: Thierry Reding <thierry.reding@gmail.com> Acked-by: Lars-Peter Clausen <lars@metafoo.de> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/11262/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-10-26MIPS: JZ4740: Use PWM lookup tableThierry Reding1-3/+8
Associate the PWM with the pwm-beeper device using a PWM lookup table. This will eventually allow the legacy function calls to pwm_request() to be removed from all consumer drivers. Signed-off-by: Thierry Reding <thierry.reding@gmail.com> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/11261/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-10-01MIPS: Fix the build on jz4740 after removing the custom gpio.hAlban Bedel2-0/+2
Somehow the wrong version of the patch to remove the use of custom gpio.h on mips has been merged. This patch add the missing fixes for a build error on jz4740 because linux/gpio.h doesn't provide any machine specfics definitions anymore. Signed-off-by: Alban Bedel <albeu@free.fr> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Brian Norris <computersforpeace@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/11089/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-09-16genirq: Remove irq argument from irq flow handlersThomas Gleixner1-1/+1
Most interrupt flow handlers do not use the irq argument. Those few which use it can retrieve the irq number from the irq descriptor. Remove the argument. Search and replace was done with coccinelle and some extra helper scripts around it. Thanks to Julia for her help! Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Julia Lawall <Julia.Lawall@lip6.fr> Cc: Jiang Liu <jiang.liu@linux.intel.com>
2015-09-03MIPS: Remove all the uses of custom gpio.hAlban Bedel1-12/+8
Currently CONFIG_ARCH_HAVE_CUSTOM_GPIO_H is defined for all MIPS machines, and each machine type provides its own gpio.h. However only a handful really implement the GPIO API, most just forward everythings to gpiolib. The Alchemy machine is notable as it provides a system to allow implementing the GPIO API at the board level. But it is not used by any board currently supported, so it can also be removed. For most machine types we can just remove the custom gpio.h, as well as the custom wrappers if some exists. Some of the code found in the wrappers must be moved to the respective GPIO driver. A few more fixes are need in some drivers as they rely on linux/gpio.h to provides some machine specific definitions, or used asm/gpio.h instead of linux/gpio.h for the gpio API. Signed-off-by: Alban Bedel <albeu@free.fr> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Cc: linux-mips@linux-mips.org Cc: Hauke Mehrtens <hauke@hauke-m.de> Cc: Rafał Miłecki <zajec5@gmail.com> Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Cc: Tejun Heo <tj@kernel.org> Cc: Alexandre Courbot <gnurou@gmail.com> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Florian Fainelli <florian@openwrt.org> Cc: Manuel Lauss <manuel.lauss@gmail.com> Cc: Joe Perches <joe@perches.com> Cc: Daniel Walter <dwalter@google.com> Cc: Sergey Ryazanov <ryazanov.s.a@gmail.com> Cc: Huacai Chen <chenhc@lemote.com> Cc: James Hartley <james.hartley@imgtec.com> Cc: Andrew Bresticker <abrestic@chromium.org> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Wolfram Sang <wsa@the-dreams.de> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Varka Bhadram <varkabhadram@gmail.com> Cc: Masanari Iida <standby24x7@gmail.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Michael Buesch <m@bues.ch> Cc: abdoulaye berthe <berthe.ab@gmail.com> Cc: linux-kernel@vger.kernel.org Cc: linux-ide@vger.kernel.org Cc: linux-gpio@vger.kernel.org Cc: linux-input@vger.kernel.org Cc: netdev@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/10828/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-09-03MIPS: jz4740: Migrate to new 'set-state' interfaceViresh Kumar1-19/+27
Migrate jz4740 driver to the new 'set-state' interface provided by clockevents core, the earlier 'set-mode' interface is marked obsolete now. This also enables us to implement callbacks for new states of clockevent devices, for example: ONESHOT_STOPPED. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Deng-Cheng Zhu <dengcheng.zhu@imgtec.com> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: linux-mips@linux-mips.org Cc: linaro-kernel@lists.linaro.org Cc: Thomas Gleixner <tglx@linutronix.de> Patchwork: https://patchwork.linux-mips.org/patch/10601/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-08-26MIPS: jz4740: Consolidate chained IRQ handler install/removeThomas Gleixner1-2/+2
Chained irq handlers usually set up handler data as well. We now have a function to set both under irq_desc->lock. Replace the two calls with one. Search and conversion was done with coccinelle. Reported-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Julia Lawall <Julia.Lawall@lip6.fr> Cc: linux-mips@linux-mips.org Cc: LKML <linux-kernel@vger.kernel.org> Cc: Jiang Liu <jiang.liu@linux.intel.com> Patchwork: https://patchwork.linux-mips.org/patch/10695/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-06-21MIPS: ingenic: Initial MIPS Creator CI20 supportPaul Burton1-0/+4
Add an initial device tree for the Ingenic JZ4780 based MIPS Creator CI20 board. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: Kumar Gala <galak@codeaurora.org> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: devicetree@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: Andrew Bresticker <abrestic@chromium.org> Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/10162/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-06-21MIPS: ingenic: Initial JZ4780 supportPaul Burton4-2/+18
Support the Ingenic JZ4780 SoC using the existing code under arch/mips/jz4740 now that it has been generalised sufficiently. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: Kumar Gala <galak@codeaurora.org> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: devicetree@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: Joshua Kinard <kumba@gentoo.org> Cc: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Cc: Deng-Cheng Zhu <dengcheng.zhu@imgtec.com> Cc: linux-kernel@vger.kernel.org Cc: Markos Chandras <markos.chandras@imgtec.com> Cc: Andreas Herrmann <andreas.herrmann@caviumnetworks.com> Patchwork: https://patchwork.linux-mips.org/patch/10164/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-06-21MIPS: JZ4740: use Ingenic SoC UART driverPaul Burton6-117/+1
Remove the serial support from arch/mips/jz4740 & make use of the new Ingenic SoC UART driver. This is done for both regular & early console output. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: Kumar Gala <galak@codeaurora.org> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: devicetree@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: linux-kernel@vger.kernel.org Cc: Brian Norris <computersforpeace@gmail.com> Cc: Apelete Seketeli <apelete@seketeli.net> Cc: Alexandre Courbot <gnurou@gmail.com> Patchwork: https://patchwork.linux-mips.org/patch/10160/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-06-21MIPS: JZ4740: only detect RAM size if not specified in DTPaul Burton2-1/+9
Allow a devicetree to specify the memory present in the system rather than probing it from the memory controller. This both saves the probing for systems where the amount of memory is fixed, and will simplify the bringup of later Ingenic SoCs where the memory controller register layout differs. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/10163/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-06-21MIPS: JZ4740: remove clock.hPaul Burton2-27/+0
The only thing remaining in arch/mips/jz4740/clock.h is declarations of the jz4740_clock_{suspend,resume} functions. Move these to arch/mips/include/asm/mach-jz4740/clock.h for consistency with similar functions, and remove the redundant arch/mips/jz4740/clock.h header. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/10156/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-06-21MIPS, clk: move jz4740 clock suspend, resume functions to jz4740-cguPaul Burton3-97/+1
The jz4740-cgu driver already has access to the CGU, so it makes sense to move the few remaining accesses to the CGU from arch/mips/jz4740 there too. Move the jz4740_clock_{suspend,resume} functions there for such consistency. The arch/mips/jz4740/clock.c file now contains nothing more of use & so is removed. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Mike Turquette <mturquette@linaro.org> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: linux-clk@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: Deng-Cheng Zhu <dengcheng.zhu@imgtec.com> Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/10158/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-06-21MIPS, clk: move jz4740 UDC auto suspend functions to jz4740-cguPaul Burton1-13/+0
The jz4740-cgu driver already has access to the CGU, so it makes sense to move the few remaining accesses to the CGU from arch/mips/jz4740 there too. Move the jz4740_clock_udc_{dis,en}able_auto_suspend functions there for such consistency. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Mike Turquette <mturquette@linaro.org> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: linux-clk@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/10154/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-06-21MIPS,clk: move jz4740_clock_set_wait_mode to jz4740-cguPaul Burton1-16/+0
The jz4740-cgu driver already has access to the CGU, so it makes sense to move the few remaining accesses to the CGU from arch/mips/jz4740 there too. Move jz4740_clock_set_wait_mode for such consistency. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Mike Turquette <mturquette@linaro.org> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: linux-clk@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/10153/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-06-21MIPS,clk: migrate JZ4740 to common clock frameworkPaul Burton6-967/+4
Migrate the JZ4740 & the qi_lb60 board to use common clock framework via the new Ingenic SoC CGU driver. Note that the JZ4740-specific debugfs code is removed since common clock framework provides its own debug capabilities. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Co-authored-by: Paul Cercueil <paul@crapouillou.net> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: Kumar Gala <galak@codeaurora.org> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mike Turquette <mturquette@linaro.org> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: devicetree@vger.kernel.org Cc: linux-clk@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: Fabian Frederick <fabf@skynet.be> Cc: Deng-Cheng Zhu <dengcheng.zhu@imgtec.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: linux-kernel@vger.kernel.org Cc: Brian Norris <computersforpeace@gmail.com> Patchwork: https://patchwork.linux-mips.org/patch/10151/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-06-21MIPS: JZ4740: replace use of jz4740_clock_bdataPaul Burton3-4/+29
Replace uses of the jz4740_clock_bdata struct with calls to clk_get_rate for the appropriate clock. This is in preparation for migrating the clocks towards common clock framework & devicetree. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: linux-mips@linux-mips.org Cc: Deng-Cheng Zhu <dengcheng.zhu@imgtec.com> Cc: linux-kernel@vger.kernel.org Cc: Apelete Seketeli <apelete@seketeli.net> Patchwork: https://patchwork.linux-mips.org/patch/10149/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-06-21MIPS: JZ4740: Call jz4740_clock_init earlierPaul Burton2-2/+3
Call jz4740_clock_init before any uses of jz4740_clock_bdata occur. This is in preparation for replacing uses of that struct with calls to clk_get_rate, which will allow the clocks to be migrated towards common clock framework & devicetree. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: linux-mips@linux-mips.org Cc: Deng-Cheng Zhu <dengcheng.zhu@imgtec.com> Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/10148/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-06-21MIPS/IRQCHIP: Move Ingenic SoC intc driver to drivers/irqchipPaul Burton4-204/+2
Move the driver for Ingenic SoC interrupt controllers into drivers/irqchip where it belongs. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: Brian Norris <computersforpeace@gmail.com> Patchwork: https://patchwork.linux-mips.org/patch/10147/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-06-21MIPS: JZ4740: support newer SoC interrupt controllersPaul Burton1-0/+9
Allow the interrupt controllers of the JZ4770, JZ4775 & JZ4780 SoCs to be probed via devicetree, supporting the 64 interrupts they provide. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: Brian Norris <computersforpeace@gmail.com> Patchwork: https://patchwork.linux-mips.org/patch/10155/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-06-21MIPS: JZ4740: Avoid JZ4740-specific namingPaul Burton3-16/+16
Rename the functions including jz4740 in their names to be more generic in preparation for supporting further SoCs, and for moving this interrupt controller code to drivers/irqchip. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: Brian Norris <computersforpeace@gmail.com> Cc: Lars-Peter Clausen <lars@metafoo.de> Patchwork: https://patchwork.linux-mips.org/patch/10146/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-06-21MIPS: JZ4740: read intc base address from DTPaul Burton1-3/+6
Read the base address of the SoC interrupt controller from the device tree rather than relying upon the JZ4740_INTC_BASE_ADDR macro, in order to remove the dependency on the asm/mach-jz4740/base.h header. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: Brian Norris <computersforpeace@gmail.com> Patchwork: https://patchwork.linux-mips.org/patch/10145/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-06-21MIPS: JZ4740: support >32 interruptsPaul Burton1-25/+46
On newer Ingenic SoCs the interrupt controller supports more than 32 interrupts, which it does by duplicating the registers at intervals of 0x20 bytes within its address space. Add support for an arbitrary number of interrupts using multiple generic chips, and provide the number of chips to register from the interrupt controller probe function. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: Brian Norris <computersforpeace@gmail.com> Patchwork: https://patchwork.linux-mips.org/patch/10141/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-06-21MIPS: JZ4740: Remove jz_intc_base globalPaul Burton1-8/+31
Avoid the need for the global variable jz_intc_base by introducing a struct ingenic_intc_data and passing it around as the IRQ handler data. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: Brian Norris <computersforpeace@gmail.com> Patchwork: https://patchwork.linux-mips.org/patch/10144/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-06-21MIPS: JZ4740: drop intc debugfs codePaul Burton1-42/+0
The debugfs code becomes a nuisance when attempting to avoid globals, since the interrupt controller probe function run too early for it to be safe to create the debugfs files. Drop it. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: Brian Norris <computersforpeace@gmail.com> Patchwork: https://patchwork.linux-mips.org/patch/10139/ Acked-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-06-21MIPS: JZ4740: register an irq_domain for the interrupt controllerPaul Burton1-0/+6
When probing the interrupt controller, register an IRQ domain such that the interrupts can be translated by devicetree code & thus used from devicetree. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: Brian Norris <computersforpeace@gmail.com> Patchwork: https://patchwork.linux-mips.org/patch/10140/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-06-21MIPS: JZ4740: parse SoC interrupt controller parent IRQ from DTPaul Burton1-1/+6
Rather than hardcoding the IRQ number used to cascade interrupts from the SoC interrupt controller to the CPU interrupt controller, read that IRQ number from the DT describing the system. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: Brian Norris <computersforpeace@gmail.com> Patchwork: https://patchwork.linux-mips.org/patch/10137/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-06-21MIPS: JZ4740: probe interrupt controller via DTPaul Burton2-3/+7
Declare the JZ4740 interrupt controller for probe via DT using the standard irqchip_init function, and make use of that function to probe the controller by adding the appropriate node to the JZ4740 dtsi. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Kumar Gala <galak@codeaurora.org> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: devicetree@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: Brian Norris <computersforpeace@gmail.com> Patchwork: https://patchwork.linux-mips.org/patch/10135/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-06-21MIPS: JZ4740: Move arch_init_irq out of arch/mips/jz4740/irq.cPaul Burton2-4/+9
In preparation for moving the JZ4740 interrupt controller driver to drivers/irqchip, move arch_init_irq into setup.c such that everything remaining in irq.c is related to said JZ4740 interrupt controller. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: Brian Norris <computersforpeace@gmail.com> Patchwork: https://patchwork.linux-mips.org/patch/10136/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-06-21MIPS: JZ4740: use generic plat_irq_dispatchPaul Burton1-12/+0
Make use of the generic plat_irq_dispatch function introduced by commit 85f7cdacbb81 "MIPS: Provide a generic plat_irq_dispatch", in order to reduce unnecessary code duplication. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: Brian Norris <computersforpeace@gmail.com> Patchwork: https://patchwork.linux-mips.org/patch/10138/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-06-21MIPS: JZ4740: probe CPU interrupt controller via DTPaul Burton1-2/+2
Use the generic irqchip_init function to probe irqchip drivers using DT, and add the appropriate node to the JZ4740 devicetree in place of the call to mips_cpu_irq_init. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: Kumar Gala <galak@codeaurora.org> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: devicetree@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: Brian Norris <computersforpeace@gmail.com> Cc: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Patchwork: https://patchwork.linux-mips.org/patch/10166/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-06-21MIPS: JZ4740: require & include DTPaul Burton1-0/+19
Require a DT for JZ4740 based systems, and add a stub one for the qi_lb60 (Ben NanoNote) board. Devices will be migrated to being probed via this DT over time. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: Kumar Gala <galak@codeaurora.org> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: devicetree@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: Andrew Bresticker <abrestic@chromium.org> Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/10132/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-06-21MIPS: JZ4740: introduce CONFIG_MACH_INGENICPaul Burton2-5/+10
In preparation for supporting Ingenic SoCs other than the JZ4740, introduce MACH_INGENIC to Kconfig & move MACH_JZ4740 to a separate entry selected by the board when appropriate. This allows MACH_INGENIC to be used to enable things generic across Ingenic SoCs. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: Andrew Bresticker <abrestic@chromium.org> Patchwork: https://patchwork.linux-mips.org/patch/10130/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-04-01MIPS: jz4740: Implement read_sched_clockDeng-Cheng Zhu1-0/+8
Use jz4740 timer counter for sched_clock source. This implementation will give high resolution cputime accounting. Signed-off-by: Deng-Cheng Zhu <dengcheng.zhu@imgtec.com> Cc: linux-mips@linux-mips.org Cc: macro@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/9485/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-03-31MIPS: Allow platforms to specify the decompressor load addressAndrew Bresticker1-0/+1
Platforms which use raw zboot images may need to link the image at a fixed address if there is no other way to communicate the load address to the bootloader. Allow the per-platform Kbuild files to specify an optional zboot image load address (zload-y) and fall back to calc_vmlinuz_load_addr if unset. Signed-off-by: Andrew Bresticker <abrestic@chromium.org> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: devicetree@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: Andrew Bresticker <abrestic@chromium.org> Cc: Ezequiel Garcia <ezequiel.garcia@imgtec.com> Cc: James Hartley <james.hartley@imgtec.com> Cc: James Hogan <james.hogan@imgtec.com> Patchwork: https://patchwork.linux-mips.org/patch/9566/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-02-18Merge tag 'for-linus-20150216' of git://git.infradead.org/linux-mtdLinus Torvalds1-1/+10
Pull MTD updates from Brian Norris: "NAND: - Add new Hisilicon NAND driver for Hip04 - Add default reboot handler, to ensure all outstanding erase transactions complete in time - jz4740: convert to use GPIO descriptor API - Atmel: add support for sama5d4 - Change default bitflip threshold to 75% of correction strength - Miscellaneous cleanups and bugfixes SPI NOR: - Freescale QuadSPI: - Fix a few probe() and remove() issues - Add a MAINTAINERS entry for this driver - Tweak transfer size to increase read performance - Add suspend/resume support - Add Micron quad I/O support - ST FSM SPI: miscellaneous fixes JFFS2: - gracefully handle corrupted 'offset' field found on flash Other: - bcm47xxpart: add tweaks for a few new devices - mtdconcat: set return lengths properly for mtd_write_oob() - map_ram: enable use with mtdoops - maps: support fallback to ROM/UBI for write-protected NOR flash" * tag 'for-linus-20150216' of git://git.infradead.org/linux-mtd: (46 commits) mtd: hisilicon: && vs & typo jffs2: fix handling of corrupted summary length mtd: hisilicon: add device tree binding documentation mtd: hisilicon: add a new NAND controller driver for hisilicon hip04 Soc mtd: avoid registering reboot notifier twice mtd: concat: set the return lengths properly mtd: kconfig: replace PPC_OF with PPC mtd: denali: remove unnecessary stubs mtd: nand: remove redundant local variable MAINTAINERS: add maintainer entry for FREESCALE QUAD SPI driver mtd: fsl-quadspi: improve read performance by increase AHB transfer size mtd: fsl-quadspi: Remove unnecessary 'map_failed' label mtd: fsl-quadspi: Remove unneeded success/error messages mtd: fsl-quadspi: Fix the error paths mtd: nand: omap: drop condition with no effect mtd: nand: jz4740: Convert to GPIO descriptor API mtd: nand: Request strength instead of bytes for soft BCH mtd: nand: default bitflip-reporting threshold to 75% of correction strength mtd: atmel_nand: introduce a new compatible string for sama5d4 chip mtd: atmel_nand: return max bitflips in all sectors in pmecc_correction() ...
2015-02-02mtd: nand: jz4740: Convert to GPIO descriptor APILars-Peter Clausen1-1/+10
Use the GPIO descriptor API instead of the deprecated legacy GPIO API to manage the busy GPIO. The patch updates both the jz4740 nand driver and the only user of the driver the qi-lb60 board driver. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-01-13MIPS: JZ4740: Fixup #include's (sparse)Brian Norris1-0/+3
Fixes sparse warnings: arch/mips/jz4740/irq.c:63:6: warning: symbol 'jz4740_irq_suspend' was not declared. Should it be static? arch/mips/jz4740/irq.c:69:6: warning: symbol 'jz4740_irq_resume' was not declared. Should it be static? Also, I've seen some elusive build errors on my automated build test where JZ4740_IRQ_BASE and NR_IRQS are missing, but I can't reproduce them manually for some reason. Anyway, mach-jz4740/irq.h should help us avoid relying on some implicit include. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/8724/ Acked-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-13 10:17:43 +0000