summaryrefslogtreecommitdiffstats
path: root/arch/mips/include
AgeCommit message (Collapse)AuthorFilesLines
2021-12-09MIPS: TXX9: Remove rbtx4938 board supportThomas Bogendoerfer3-182/+0
No active MIPS user own this board, so let's remove it. Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org> Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
2021-12-09MIPS: Loongson64: Use three arguments for sltiNathan Chancellor1-2/+2
LLVM's integrated assembler does not support 'slti <reg>, <imm>': <instantiation>:16:12: error: invalid operand for instruction slti $12, (0x6300 | 0x0008) ^ arch/mips/kernel/head.S:86:2: note: while in macro instantiation kernel_entry_setup # cpu specific setup ^ <instantiation>:16:12: error: invalid operand for instruction slti $12, (0x6300 | 0x0008) ^ arch/mips/kernel/head.S:150:2: note: while in macro instantiation smp_slave_setup ^ To increase compatibility with LLVM's integrated assembler, use the full form of 'slti <reg>, <reg>, <imm>', which matches the rest of arch/mips/. This does not result in any change for GNU as. Link: https://github.com/ClangBuiltLinux/linux/issues/1526 Reported-by: Ryutaroh Matsumoto <ryutaroh@ict.e.titech.ac.jp> Signed-off-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-12-09MIPS: Only define pci_remap_iospace() for RalinkTiezhu Yang2-4/+2
After commit 9f76779f2418 ("MIPS: implement architecture-specific 'pci_remap_iospace()'"), there exists the following warning on the Loongson64 platform: loongson-pci 1a000000.pci: IO 0x0018020000..0x001803ffff -> 0x0000020000 loongson-pci 1a000000.pci: MEM 0x0040000000..0x007fffffff -> 0x0040000000 ------------[ cut here ]------------ WARNING: CPU: 2 PID: 1 at arch/mips/pci/pci-generic.c:55 pci_remap_iospace+0x84/0x90 resource start address is not zero ... Call Trace: [<ffffffff8020dc78>] show_stack+0x40/0x120 [<ffffffff80cf4a0c>] dump_stack_lvl+0x58/0x74 [<ffffffff8023a0b0>] __warn+0xe0/0x110 [<ffffffff80cee02c>] warn_slowpath_fmt+0xa4/0xd0 [<ffffffff80cecf24>] pci_remap_iospace+0x84/0x90 [<ffffffff807f9864>] devm_pci_remap_iospace+0x5c/0xb8 [<ffffffff808121b0>] devm_of_pci_bridge_init+0x178/0x1f8 [<ffffffff807f4000>] devm_pci_alloc_host_bridge+0x78/0x98 [<ffffffff80819454>] loongson_pci_probe+0x34/0x160 [<ffffffff809203cc>] platform_probe+0x6c/0xe0 [<ffffffff8091d5d4>] really_probe+0xbc/0x340 [<ffffffff8091d8f0>] __driver_probe_device+0x98/0x110 [<ffffffff8091d9b8>] driver_probe_device+0x50/0x118 [<ffffffff8091dea0>] __driver_attach+0x80/0x118 [<ffffffff8091b280>] bus_for_each_dev+0x80/0xc8 [<ffffffff8091c6d8>] bus_add_driver+0x130/0x210 [<ffffffff8091ead4>] driver_register+0x8c/0x150 [<ffffffff80200a8c>] do_one_initcall+0x54/0x288 [<ffffffff811a5320>] kernel_init_freeable+0x27c/0x2e4 [<ffffffff80cfc380>] kernel_init+0x2c/0x134 [<ffffffff80205a2c>] ret_from_kernel_thread+0x14/0x1c ---[ end trace e4a0efe10aa5cce6 ]--- loongson-pci 1a000000.pci: error -19: failed to map resource [io 0x20000-0x3ffff] We can see that the resource start address is 0x0000020000, because the ISA Bridge used the zero address which is defined in the dts file arch/mips/boot/dts/loongson/ls7a-pch.dtsi: ISA Bridge: /bus@10000000/isa@18000000 IO 0x0000000018000000..0x000000001801ffff -> 0x0000000000000000 Based on the above analysis, the architecture-specific pci_remap_iospace() is not suitable for Loongson64, we should only define pci_remap_iospace() for Ralink on MIPS based on the commit background. Fixes: 9f76779f2418 ("MIPS: implement architecture-specific 'pci_remap_iospace()'") Suggested-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Tested-by: Sergio Paracuellos <sergio.paracuellos@gmail.com> Acked-by: Sergio Paracuellos <sergio.paracuellos@gmail.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-12-08Merge branch 'kvm-on-hv-msrbm-fix' into HEADPaolo Bonzini1-2/+0
Merge bugfix for enlightened MSR Bitmap, before adding support to KVM for exposing the feature to nested guests.
2021-12-08KVM: Drop obsolete kvm_arch_vcpu_block_finish()Sean Christopherson1-1/+0
Drop kvm_arch_vcpu_block_finish() now that all arch implementations are nops. No functional change intended. Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: David Matlack <dmatlack@google.com> Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20211009021236.4122790-10-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-11-29MIPS: CPS: Use bitfield helpersGeert Uytterhoeven1-12/+7
Use the FIELD_GET() helper, instead of open-coding the same operation. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-11-25futex: Ensure futex_atomic_cmpxchg_inatomic() is presentArnd Bergmann1-11/+18
The boot-time detection of futex_atomic_cmpxchg_inatomic() has a bug on some 32-bit arm builds, and Thomas Gleixner suggested that setting CONFIG_HAVE_FUTEX_CMPXCHG would avoid the problem, as it is always present anyway. Looking into which other architectures could do the same showed that almost all architectures have it, the exceptions being: - some old 32-bit MIPS uniprocessor cores without ll/sc - one xtensa variant with no SMP - 32-bit SPARC when built for SMP Fix MIPS And Xtensa by rearranging the generic code to let it be used as a fallback. For SPARC, the SMP definition just ends up turning off futex anyway, so this can be done at Kconfig time instead. Note that sparc32 glibc requires the CASA instruction for its mutexes anyway, which is only available when running on SPARCv9 or LEON CPUs, but needs to be implemented in the sparc32 kernel for those. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Max Filippov <jcmvbkbc@gmail.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Rich Felker <dalias@libc.org> Link: https://lore.kernel.org/r/20211026100432.1730393-1-arnd@kernel.org
2021-11-17Add linux/cacheflush.hMatthew Wilcox (Oracle)1-2/+0
Many architectures do not include asm-generic/cacheflush.h, so turn the includes on their head and add linux/cacheflush.h which includes asm/cacheflush.h. Move the flush_dcache_folio() declaration from asm-generic/cacheflush.h to linux/cacheflush.h and change linux/highmem.h to include linux/cacheflush.h instead of asm/cacheflush.h so that all necessary places will see flush_dcache_folio(). More functions should have their default implementations moved in the future, but those are for follow-on patches. This fixes csky, sparc and sparc64 which were missed in the commit which added flush_dcache_folio(). Fixes: 08b0b0059bf1 ("mm: Add flush_dcache_folio()") Suggested-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
2021-11-13Merge tag 'mips_5.16_1' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux Pull more MIPS updates from Thomas Bogendoerfer: - Config updates for BMIPS platform - Build fixes - Makefile cleanups * tag 'mips_5.16_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: mips: decompressor: do not copy source files while building MIPS: boot/compressed/: add __bswapdi2() to target for ZSTD decompression MIPS: fix duplicated slashes for Platform file path MIPS: fix *-pkg builds for loongson2ef platform PCI: brcmstb: Allow building for BMIPS_GENERIC MIPS: BMIPS: Enable PCI Kconfig MIPS: VDSO: remove -nostdlib compiler flag mips: BCM63XX: ensure that CPU_SUPPORTS_32BIT_KERNEL is set MIPS: Update bmips_stb_defconfig MIPS: Allow modules to set board_be_handler
2021-11-09MIPS: Allow modules to set board_be_handlerFlorian Fainelli1-1/+1
After making the brcmstb_gisb driver modular with 707a4cdf86e5 ("bus: brcmstb_gisb: Allow building as module") Guenter reported that mips allmodconfig failed to link because board_be_handler was referenced. Thomas indicated that if we were to continue making the brcmstb_gisb driver modular for MIPS we would need to introduce a function that allows setting the board_be_handler and export that function towards modules. This is what is being done here: board_be_handler is made static and is now settable with a mips_set_be_handler() function which is exported. Reported-by: Guenter Roeck <linux@roeck-us.net> Suggested-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Fixes: 707a4cdf86e5 ("bus: brcmstb_gisb: Allow building as module") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-11-05Merge tag 'mips_5.16' of ↵Linus Torvalds39-3708/+189
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux Pull MIPS updates from Thomas Bogendoerfer: - added printing of CPU options for /proc/cpuinfo - removed support for Netlogic SOCs - fixes and cleanup * tag 'mips_5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: MIPS: Cobalt: Explain GT64111 early PCI fixup mips: fix HUGETLB function without THP enabled mips: cm: Convert to bitfield API to fix out-of-bounds access MIPS: Remove NETLOGIC support MIPS: kernel: proc: add CPU option reporting MIPS: kernel: proc: use seq_puts instead of seq_printf MIPS: kernel: proc: fix trivial style errors MIPS: Fix assembly error from MIPSr2 code used within MIPS_ISA_ARCH_LEVEL MIPS: octeon: Remove unused functions MIPS: Loongson64: Add of_node_put() before break bcm47xx: Replace printk(KERN_ALERT ... pci_devname(dev)) with pci_alert() bcm47xx: Get rid of redundant 'else' MIPS: sni: Fix the build MIPS: Avoid macro redefinitions MIPS: loongson64: Fix no screen display during boot-up MIPS: loongson64: make CPU_LOONGSON64 depends on MIPS_FP_SUPPORT
2021-11-04Merge tag 'staging-5.16-rc1' of ↵Linus Torvalds2-2/+6
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging driver updates from Greg KH: "Here is the big set of staging driver updates and cleanups for 5.16-rc1. Overall we ended up removing a lot of code this time, a bit over 20,000 lines are now gone thanks to a lot of cleanup work by many developers. Nothing huge in here functionality wise, just loads of cleanups: - r8188eu driver major cleanups and removal of unused and dead code - wlan-ng minor cleanups - fbtft driver cleanups - most driver cleanups - rtl8* drivers cleanups - rts5208 driver cleanups - vt6655 driver cleanups - vc04_services drivers cleanups - wfx cleanups on the way to almost getting this merged out of staging (it's close!) - tiny mips changes needed for the mt7621 drivers, they have been acked by the respective subsystem maintainers to go through this tree. All of these have been in linux-next for a while with no reported issues" * tag 'staging-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (622 commits) staging: r8188eu: hal: remove goto statement and local variable staging: rtl8723bs: hal remove the assignment to itself staging: rtl8723bs: fix unmet dependency on CRYPTO for CRYPTO_LIB_ARC4 staging: vchiq_core: get rid of typedef staging: fieldbus: anybus: reframe comment to avoid warning staging: r8188eu: fix missing unlock in rtw_resume() staging: r8188eu: core: remove the goto from rtw_IOL_accquire_xmit_frame staging: r8188eu: core: remove goto statement staging: vt6655: Rename `dwAL7230InitTable` array staging: vt6655: Rename `dwAL2230PowerTable` array staging: vt6655: Rename `dwAL7230InitTableAMode` array staging: vt6655: Rename `dwAL7230ChannelTable2` array staging: vt6655: Rename `dwAL7230ChannelTable1` array staging: vt6655: Rename `dwAL7230ChannelTable0` array staging: vt6655: Rename `dwAL2230ChannelTable1` array staging: vt6655: Rename `dwAL2230ChannelTable0` array staging: r8712u: fix control-message timeout staging: rtl8192u: fix control-message timeouts staging: mt7621-dts: add missing SPDX license to files staging: vchiq_core: fix quoted strings split across lines ...
2021-11-02Merge tag 'net-next-for-5.16' of ↵Linus Torvalds3-1/+8
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Remove socket skb caches - Add a SO_RESERVE_MEM socket op to forward allocate buffer space and avoid memory accounting overhead on each message sent - Introduce managed neighbor entries - added by control plane and resolved by the kernel for use in acceleration paths (BPF / XDP right now, HW offload users will benefit as well) - Make neighbor eviction on link down controllable by userspace to work around WiFi networks with bad roaming implementations - vrf: Rework interaction with netfilter/conntrack - fq_codel: implement L4S style ce_threshold_ect1 marking - sch: Eliminate unnecessary RCU waits in mini_qdisc_pair_swap() BPF: - Add support for new btf kind BTF_KIND_TAG, arbitrary type tagging as implemented in LLVM14 - Introduce bpf_get_branch_snapshot() to capture Last Branch Records - Implement variadic trace_printk helper - Add a new Bloomfilter map type - Track <8-byte scalar spill and refill - Access hw timestamp through BPF's __sk_buff - Disallow unprivileged BPF by default - Document BPF licensing Netfilter: - Introduce egress hook for looking at raw outgoing packets - Allow matching on and modifying inner headers / payload data - Add NFT_META_IFTYPE to match on the interface type either from ingress or egress Protocols: - Multi-Path TCP: - increase default max additional subflows to 2 - rework forward memory allocation - add getsockopts: MPTCP_INFO, MPTCP_TCPINFO, MPTCP_SUBFLOW_ADDRS - MCTP flow support allowing lower layer drivers to configure msg muxing as needed - Automatic Multicast Tunneling (AMT) driver based on RFC7450 - HSR support the redbox supervision frames (IEC-62439-3:2018) - Support for the ip6ip6 encapsulation of IOAM - Netlink interface for CAN-FD's Transmitter Delay Compensation - Support SMC-Rv2 eliminating the current same-subnet restriction, by exploiting the UDP encapsulation feature of RoCE adapters - TLS: add SM4 GCM/CCM crypto support - Bluetooth: initial support for link quality and audio/codec offload Driver APIs: - Add a batched interface for RX buffer allocation in AF_XDP buffer pool - ethtool: Add ability to control transceiver modules' power mode - phy: Introduce supported interfaces bitmap to express MAC capabilities and simplify PHY code - Drop rtnl_lock from DSA .port_fdb_{add,del} callbacks New drivers: - WiFi driver for Realtek 8852AE 802.11ax devices (rtw89) - Ethernet driver for ASIX AX88796C SPI device (x88796c) Drivers: - Broadcom PHYs - support 72165, 7712 16nm PHYs - support IDDQ-SR for additional power savings - PHY support for QCA8081, QCA9561 PHYs - NXP DPAA2: support for IRQ coalescing - NXP Ethernet (enetc): support for software TCP segmentation - Renesas Ethernet (ravb) - support DMAC and EMAC blocks of Gigabit-capable IP found on RZ/G2L SoC - Intel 100G Ethernet - support for eswitch offload of TC/OvS flow API, including offload of GRE, VxLAN, Geneve tunneling - support application device queues - ability to assign Rx and Tx queues to application threads - PTP and PPS (pulse-per-second) extensions - Broadcom Ethernet (bnxt) - devlink health reporting and device reload extensions - Mellanox Ethernet (mlx5) - offload macvlan interfaces - support HW offload of TC rules involving OVS internal ports - support HW-GRO and header/data split - support application device queues - Marvell OcteonTx2: - add XDP support for PF - add PTP support for VF - Qualcomm Ethernet switch (qca8k): support for QCA8328 - Realtek Ethernet DSA switch (rtl8366rb) - support bridge offload - support STP, fast aging, disabling address learning - support for Realtek RTL8365MB-VC, a 4+1 port 10M/100M/1GE switch - Mellanox Ethernet/IB switch (mlxsw) - multi-level qdisc hierarchy offload (e.g. RED, prio and shaping) - offload root TBF qdisc as port shaper - support multiple routing interface MAC address prefixes - support for IP-in-IP with IPv6 underlay - MediaTek WiFi (mt76) - mt7921 - ASPM, 6GHz, SDIO and testmode support - mt7915 - LED and TWT support - Qualcomm WiFi (ath11k) - include channel rx and tx time in survey dump statistics - support for 80P80 and 160 MHz bandwidths - support channel 2 in 6 GHz band - spectral scan support for QCN9074 - support for rx decapsulation offload (data frames in 802.3 format) - Qualcomm phone SoC WiFi (wcn36xx) - enable Idle Mode Power Save (IMPS) to reduce power consumption during idle - Bluetooth driver support for MediaTek MT7922 and MT7921 - Enable support for AOSP Bluetooth extension in Qualcomm WCN399x and Realtek 8822C/8852A - Microsoft vNIC driver (mana) - support hibernation and kexec - Google vNIC driver (gve) - support for jumbo frames - implement Rx page reuse Refactor: - Make all writes to netdev->dev_addr go thru helpers, so that we can add this address to the address rbtree and handle the updates - Various TCP cleanups and optimizations including improvements to CPU cache use - Simplify the gnet_stats, Qdisc stats' handling and remove qdisc->running sequence counter - Driver changes and API updates to address devlink locking deficiencies" * tag 'net-next-for-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2122 commits) Revert "net: avoid double accounting for pure zerocopy skbs" selftests: net: add arp_ndisc_evict_nocarrier net: ndisc: introduce ndisc_evict_nocarrier sysctl parameter net: arp: introduce arp_evict_nocarrier sysctl parameter libbpf: Deprecate AF_XDP support kbuild: Unify options for BTF generation for vmlinux and modules selftests/bpf: Add a testcase for 64-bit bounds propagation issue. bpf: Fix propagation of signed bounds from 64-bit min/max into 32-bit. bpf: Fix propagation of bounds from 64-bit min/max into 32-bit and var_off. net: vmxnet3: remove multiple false checks in vmxnet3_ethtool.c net: avoid double accounting for pure zerocopy skbs tcp: rename sk_wmem_free_skb netdevsim: fix uninit value in nsim_drv_configure_vfs() selftests/bpf: Fix also no-alu32 strobemeta selftest bpf: Add missing map_delete_elem method to bloom filter map selftests/bpf: Add bloom map success test for userspace calls bpf: Add alignment padding for "map_extra" + consolidate holes bpf: Bloom filter map naming fixups selftests/bpf: Add test cases for struct_ops prog bpf: Add dummy BPF STRUCT_OPS for test purpose ...
2021-11-02mips: fix HUGETLB function without THP enabledZhaolong Zhang1-23/+22
ltp test futex_wake04 without THP enabled leads to below bt: [<ffffffff80a03728>] BUG+0x0/0x8 [<ffffffff80a0624c>] internal_get_user_pages_fast+0x81c/0x820 [<ffffffff8093ac18>] get_futex_key+0xa0/0x480 [<ffffffff8093b074>] futex_wait_setup+0x7c/0x1a8 [<ffffffff8093b2c0>] futex_wait+0x120/0x228 [<ffffffff8093dbe8>] do_futex+0x140/0xbd8 [<ffffffff8093e78c>] sys_futex+0x10c/0x1c0 [<ffffffff808703d0>] syscall_common+0x34/0x58 Move pmd_write() and pmd_page() from TRANSPARENT_HUGEPAGE scope to MIPS_HUGE_TLB_SUPPORT scope, because both THP and HUGETLB will need them. Signed-off-by: Zhaolong Zhang <zhangzl2013@126.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-11-02mips: cm: Convert to bitfield API to fix out-of-bounds accessGeert Uytterhoeven1-6/+6
mips_cm_error_report() extracts the cause and other cause from the error register using shifts. This works fine for the former, as it is stored in the top bits, and the shift will thus remove all non-related bits. However, the latter is stored in the bottom bits, hence thus needs masking to get rid of non-related bits. Without such masking, using it as an index into the cm2_causes[] array will lead to an out-of-bounds access, probably causing a crash. Fix this by using FIELD_GET() instead. Bite the bullet and convert all MIPS CM handling to the bitfield API, to improve readability and safety. Fixes: 3885c2b463f6a236 ("MIPS: CM: Add support for reporting CM cache errors") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-11-01Merge https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextJakub Kicinski1-0/+5
Alexei Starovoitov says: ==================== pull-request: bpf-next 2021-11-01 We've added 181 non-merge commits during the last 28 day(s) which contain a total of 280 files changed, 11791 insertions(+), 5879 deletions(-). The main changes are: 1) Fix bpf verifier propagation of 64-bit bounds, from Alexei. 2) Parallelize bpf test_progs, from Yucong and Andrii. 3) Deprecate various libbpf apis including af_xdp, from Andrii, Hengqi, Magnus. 4) Improve bpf selftests on s390, from Ilya. 5) bloomfilter bpf map type, from Joanne. 6) Big improvements to JIT tests especially on Mips, from Johan. 7) Support kernel module function calls from bpf, from Kumar. 8) Support typeless and weak ksym in light skeleton, from Kumar. 9) Disallow unprivileged bpf by default, from Pawan. 10) BTF_KIND_DECL_TAG support, from Yonghong. 11) Various bpftool cleanups, from Quentin. * https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (181 commits) libbpf: Deprecate AF_XDP support kbuild: Unify options for BTF generation for vmlinux and modules selftests/bpf: Add a testcase for 64-bit bounds propagation issue. bpf: Fix propagation of signed bounds from 64-bit min/max into 32-bit. bpf: Fix propagation of bounds from 64-bit min/max into 32-bit and var_off. selftests/bpf: Fix also no-alu32 strobemeta selftest bpf: Add missing map_delete_elem method to bloom filter map selftests/bpf: Add bloom map success test for userspace calls bpf: Add alignment padding for "map_extra" + consolidate holes bpf: Bloom filter map naming fixups selftests/bpf: Add test cases for struct_ops prog bpf: Add dummy BPF STRUCT_OPS for test purpose bpf: Factor out helpers for ctx access checking bpf: Factor out a helper to prepare trampoline for struct_ops prog selftests, bpf: Fix broken riscv build riscv, libbpf: Add RISC-V (RV64) support to bpf_tracing.h tools, build: Add RISC-V to HOSTARCH parsing riscv, bpf: Increase the maximum number of iterations selftests, bpf: Add one test for sockmap with strparser selftests, bpf: Fix test_txmsg_ingress_parser error ... ==================== Link: https://lore.kernel.org/r/20211102013123.9005-1-alexei.starovoitov@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-11-01Merge tag 'sched-core-2021-11-01' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler updates from Thomas Gleixner: - Revert the printk format based wchan() symbol resolution as it can leak the raw value in case that the symbol is not resolvable. - Make wchan() more robust and work with all kind of unwinders by enforcing that the task stays blocked while unwinding is in progress. - Prevent sched_fork() from accessing an invalid sched_task_group - Improve asymmetric packing logic - Extend scheduler statistics to RT and DL scheduling classes and add statistics for bandwith burst to the SCHED_FAIR class. - Properly account SCHED_IDLE entities - Prevent a potential deadlock when initial priority is assigned to a newly created kthread. A recent change to plug a race between cpuset and __sched_setscheduler() introduced a new lock dependency which is now triggered. Break the lock dependency chain by moving the priority assignment to the thread function. - Fix the idle time reporting in /proc/uptime for NOHZ enabled systems. - Improve idle balancing in general and especially for NOHZ enabled systems. - Provide proper interfaces for live patching so it does not have to fiddle with scheduler internals. - Add cluster aware scheduling support. - A small set of tweaks for RT (irqwork, wait_task_inactive(), various scheduler options and delaying mmdrop) - The usual small tweaks and improvements all over the place * tag 'sched-core-2021-11-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (69 commits) sched/fair: Cleanup newidle_balance sched/fair: Remove sysctl_sched_migration_cost condition sched/fair: Wait before decaying max_newidle_lb_cost sched/fair: Skip update_blocked_averages if we are defering load balance sched/fair: Account update_blocked_averages in newidle_balance cost x86: Fix __get_wchan() for !STACKTRACE sched,x86: Fix L2 cache mask sched/core: Remove rq_relock() sched: Improve wake_up_all_idle_cpus() take #2 irq_work: Also rcuwait for !IRQ_WORK_HARD_IRQ on PREEMPT_RT irq_work: Handle some irq_work in a per-CPU thread on PREEMPT_RT irq_work: Allow irq_work_sync() to sleep if irq_work() no IRQ support. sched/rt: Annotate the RT balancing logic irqwork as IRQ_WORK_HARD_IRQ sched: Add cluster scheduler level for x86 sched: Add cluster scheduler level in core and related Kconfig for ARM64 topology: Represent clusters of CPUs within a die sched: Disable -Wunused-but-set-variable sched: Add wrapper for get_wchan() to keep task blocked x86: Fix get_wchan() to support the ORC unwinder proc: Use task_is_running() for wchan in /proc/$pid/stat ...
2021-11-01Merge tag 'folio-5.16' of git://git.infradead.org/users/willy/pagecacheLinus Torvalds1-0/+2
Pull memory folios from Matthew Wilcox: "Add memory folios, a new type to represent either order-0 pages or the head page of a compound page. This should be enough infrastructure to support filesystems converting from pages to folios. The point of all this churn is to allow filesystems and the page cache to manage memory in larger chunks than PAGE_SIZE. The original plan was to use compound pages like THP does, but I ran into problems with some functions expecting only a head page while others expect the precise page containing a particular byte. The folio type allows a function to declare that it's expecting only a head page. Almost incidentally, this allows us to remove various calls to VM_BUG_ON(PageTail(page)) and compound_head(). This converts just parts of the core MM and the page cache. For 5.17, we intend to convert various filesystems (XFS and AFS are ready; other filesystems may make it) and also convert more of the MM and page cache to folios. For 5.18, multi-page folios should be ready. The multi-page folios offer some improvement to some workloads. The 80% win is real, but appears to be an artificial benchmark (postgres startup, which isn't a serious workload). Real workloads (eg building the kernel, running postgres in a steady state, etc) seem to benefit between 0-10%. I haven't heard of any performance losses as a result of this series. Nobody has done any serious performance tuning; I imagine that tweaking the readahead algorithm could provide some more interesting wins. There are also other places where we could choose to create large folios and currently do not, such as writes that are larger than PAGE_SIZE. I'd like to thank all my reviewers who've offered review/ack tags: Christoph Hellwig, David Howells, Jan Kara, Jeff Layton, Johannes Weiner, Kirill A. Shutemov, Michal Hocko, Mike Rapoport, Vlastimil Babka, William Kucharski, Yu Zhao and Zi Yan. I'd also like to thank those who gave feedback I incorporated but haven't offered up review tags for this part of the series: Nick Piggin, Mel Gorman, Ming Lei, Darrick Wong, Ted Ts'o, John Hubbard, Hugh Dickins, and probably a few others who I forget" * tag 'folio-5.16' of git://git.infradead.org/users/willy/pagecache: (90 commits) mm/writeback: Add folio_write_one mm/filemap: Add FGP_STABLE mm/filemap: Add filemap_get_folio mm/filemap: Convert mapping_get_entry to return a folio mm/filemap: Add filemap_add_folio() mm/filemap: Add filemap_alloc_folio mm/page_alloc: Add folio allocation functions mm/lru: Add folio_add_lru() mm/lru: Convert __pagevec_lru_add_fn to take a folio mm: Add folio_evictable() mm/workingset: Convert workingset_refault() to take a folio mm/filemap: Add readahead_folio() mm/filemap: Add folio_mkwrite_check_truncate() mm/filemap: Add i_blocks_per_folio() mm/writeback: Add folio_redirty_for_writepage() mm/writeback: Add folio_account_redirty() mm/writeback: Add folio_clear_dirty_for_io() mm/writeback: Add folio_cancel_dirty() mm/writeback: Add folio_account_cleaned() mm/writeback: Add filemap_dirty_folio() ...
2021-10-24MIPS: Remove NETLOGIC supportThomas Bogendoerfer30-3578/+2
No (active) developer owns this hardware, so let's remove Linux support. Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-10-24MIPS: Fix assembly error from MIPSr2 code used within MIPS_ISA_ARCH_LEVELMaciej W. Rozycki1-1/+4
Fix assembly errors like: {standard input}: Assembler messages: {standard input}:287: Error: opcode not supported on this processor: mips3 (mips3) `dins $10,$7,32,32' {standard input}:680: Error: opcode not supported on this processor: mips3 (mips3) `dins $10,$7,32,32' {standard input}:1274: Error: opcode not supported on this processor: mips3 (mips3) `dins $12,$9,32,32' {standard input}:2175: Error: opcode not supported on this processor: mips3 (mips3) `dins $10,$7,32,32' make[1]: *** [scripts/Makefile.build:277: mm/highmem.o] Error 1 with code produced from `__cmpxchg64' for MIPS64r2 CPU configurations using CONFIG_32BIT and CONFIG_PHYS_ADDR_T_64BIT. This is due to MIPS_ISA_ARCH_LEVEL downgrading the assembly architecture to `r4000' i.e. MIPS III for MIPS64r2 configurations, while there is a block of code containing a DINS MIPS64r2 instruction conditionalized on MIPS_ISA_REV >= 2 within the scope of the downgrade. The assembly architecture override code pattern has been put there for LL/SC instructions, so that code compiles for configurations that select a processor to build for that does not support these instructions while still providing run-time support for processors that do, dynamically switched by non-constant `cpu_has_llsc'. It went in with linux-mips.org commit aac8aa7717a2 ("Enable a suitable ISA for the assembler around ll/sc so that code builds even for processors that don't support the instructions. Plus minor formatting fixes.") back in 2005. Fix the problem by wrapping these instructions along with the adjacent SYNC instructions only, following the practice established with commit cfd54de3b0e4 ("MIPS: Avoid move psuedo-instruction whilst using MIPS_ISA_LEVEL") and commit 378ed6f0e3c5 ("MIPS: Avoid using .set mips0 to restore ISA"). Strictly speaking the SYNC instructions do not have to be wrapped as they are only used as a Loongson3 erratum workaround, so they will be enabled in the assembler by default, but do this so as to keep code consistent with other places. Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk> Fixes: c7e2d71dda7a ("MIPS: Fix set_pte() for Netlogic XLR using cmpxchg64()") Cc: stable@vger.kernel.org # v5.1+ Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-10-24MIPS: octeon: Remove unused functionsThomas Bogendoerfer2-8/+0
cvmx_helper_initialize_packet_io_local() is unused and after removing it cvmx_pko_initialize_local() is also unused. Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-10-18mm: Add flush_dcache_folio()Matthew Wilcox (Oracle)1-0/+2
This is a default implementation which calls flush_dcache_page() on each page in the folio. If architectures can do better, they should implement their own version of it. Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Acked-by: Vlastimil Babka <vbabka@suse.cz>
2021-10-18Merge 5.15-rc6 into staging-nextGreg Kroah-Hartman1-22/+1
We need the staging fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-10-15sched: Add wrapper for get_wchan() to keep task blockedKees Cook1-1/+1
Having a stable wchan means the process must be blocked and for it to stay that way while performing stack unwinding. Suggested-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> [arm] Tested-by: Mark Rutland <mark.rutland@arm.com> [arm64] Link: https://lkml.kernel.org/r/20211008111626.332092234@infradead.org
2021-10-09MIPS: asm: pci: define arch-specific 'pci_remap_iospace()' dependent on ↵Sergio Paracuellos1-0/+2
'CONFIG_PCI_DRIVERS_GENERIC' Some MIPS defconfigs that don't define 'CONFIG_PCI_DRIVERS_GENERIC' but define 'CONFIG_PCI_DRIVERS_LEGACY' or none of them, can fail when they are built since definition for 'pci_remap_iospace' is being done in include file 'arch/mips/include/asm/pci.h' and the specific function implemented in 'arch/mips/pci/pci-generic.c'. MIPS PCI drivers that don't use generic PCI core APIs don't really need 'pci_remap_iospace' to be defined at all. Hence, change definition for 'pci_remap_iospace' to be dependent on the preprocessor 'CONFIG_PCI_DRIVERS_GENERIC' definition to avoid possible build problems. Fixes: 9f76779f2418 ("MIPS: implement architecture-specific 'pci_remap_iospace()'") CC: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com> Link: https://lore.kernel.org/r/20211008095311.26475-1-sergio.paracuellos@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-10-07Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-22/+1
No conflicts. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-06mips, uasm: Add workaround for Loongson-2F nop CPU errataJohan Almbladh1-0/+4
This patch implements a workaround for the Loongson-2F nop in generated, code, if the existing option CONFIG_CPU_NOP_WORKAROUND is set. Before, the binutils option -mfix-loongson2f-nop was enabled, but no workaround was done when emitting MIPS code. Now, the nop pseudo instruction is emitted as "or ax,ax,zero" instead of the default "sll zero,zero,0". This is consistent with the workaround implemented by binutils. Signed-off-by: Johan Almbladh <johan.almbladh@anyfinetworks.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Link: https://sourceware.org/legacy-ml/binutils/2009-11/msg00387.html Link: https://lore.kernel.org/bpf/20211005165408.2305108-3-johan.almbladh@anyfinetworks.com
2021-10-06mips, uasm: Enable muhu opcode for MIPS R6Tony Ambardar1-0/+1
Enable the 'muhu' instruction, complementing the existing 'mulu', needed to implement a MIPS32 BPF JIT. Also fix a typo in the existing definition of 'dmulu'. Signed-off-by: Tony Ambardar <Tony.Ambardar@gmail.com> Signed-off-by: Johan Almbladh <johan.almbladh@anyfinetworks.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20211005165408.2305108-2-johan.almbladh@anyfinetworks.com
2021-10-05MIPS: implement architecture-specific 'pci_remap_iospace()'Sergio Paracuellos1-0/+2
To make PCI IO work we need to properly virtually map IO cpu physical address and set this virtual address as the address of the first PCI IO port which is set using function 'set_io_port_base()'. Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com> Link: https://lore.kernel.org/r/20210925203224.10419-6-sergio.paracuellos@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-10-05MIPS: ralink: set PCI_IOBASE to 'mips_io_port_base'Sergio Paracuellos1-2/+2
By default MIPS architecture use function 'set_io_port_base()' to set the virtual address of the first IO port. This function at the end sets variable 'mips_io_port_base' with the desired address. To align things and allow to change first IO port location address for PCI, set PCI_IOBASE definition as 'mips_io_port_base'. Fixes: 222b27713d7f ("MIPS: ralink: Define PCI_IOBASE") Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com> Link: https://lore.kernel.org/r/20210925203224.10419-4-sergio.paracuellos@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-10-05Revert "MIPS: ralink: don't define PC_IOBASE but increase IO_SPACE_LIMIT"Sergio Paracuellos1-1/+3
This reverts commit 159697474db41732ef3b6c2e8d9395f09d1f659e. There is no real need to increase IO_SPACE_LIMIT if PCI_IOBASE is properly set to 'mips_io_port_base'. Hence revert this commit first before doing anything else. Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com> Link: https://lore.kernel.org/r/20210925203224.10419-2-sergio.paracuellos@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-10-02MIPS: Revert "add support for buggy MT7621S core detection"Ilya Lipnitskiy1-22/+1
This reverts commit 6decd1aad15f56b169217789630a0098b496de0e. CPULAUNCH register is not set properly by some bootloaders, causing a regression until a bootloader change is made, which is hard if not impossible on some embedded devices. Revert the change until a more robust core detection mechanism that works on MT7621S routers such as Netgear R6220 as well as platforms like Digi EX15 can be made. Link: https://lore.kernel.org/lkml/4d9e3b39-7caa-d372-5d7b-42dcec36fec7@kernel.org Fixes: 6decd1aad15f ("MIPS: add support for buggy MT7621S core detection") Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com> Acked-by: Sergio Paracuellos <sergio.paracuellos@gmail.com> Acked-by: Greg Ungerer <gerg@kernel.org> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-10-01fix up for "net: add new socket option SO_RESERVE_MEM"Stephen Rothwell1-0/+2
Some architectures do not include uapi/asm/socket.h Fixes: 2bb2f5fb21b0 ("net: add new socket option SO_RESERVE_MEM") Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-23MIPS: Avoid macro redefinitionsPaul Cercueil4-92/+155
To be able to compile the kernel with LTO, the assembler macros cannot be declared in the global scope, or the compiler will complain about redefined macros. Update the code so that macros are defined then undefined when they are used. Note that virt support was added in 2.24 and xpa in 2.25. So we still need the TOOLCHAIN defines for them. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-09-21MIPS: ralink: don't define PC_IOBASE but increase IO_SPACE_LIMITSergio Paracuellos1-3/+1
Defining PCI_IOBASE results in pci resource handling working but the addresses generated for IO accesses are wrong since the ioremap in the pci core function 'pci_parse_request_of_pci_ranges' tries to remap to a fixed virtual address (PC_IOBASE) which can't work for KSEG1 addresses. To get it working this way, we would need to put PCI_IOBASE somewhere into KSEG2 which will result in creating TLB entries for IO addresses, which most of the time isn't needed on MIPS because of access via KSEG1. So avoid to define PCI_IOBASE and increase IO_SPACE_LIMIT resource for ralink MIPS platform instead, to get valid IO addresses for resources from pci core 'pci_address_to_pio' function. Fixes: 222b27713d7f ("MIPS: ralink: Define PCI_IOBASE") Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com> Link: https://lore.kernel.org/r/20210822161005.22467-2-sergio.paracuellos@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-09-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski2-34/+0
No conflicts! Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-09-15MIPS: lantiq: dma: make the burst length configurable by the driversAleksander Jan Bajkowski1-1/+1
Make the burst length configurable by the drivers. Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl> Acked-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-08arch: remove compat_alloc_user_spaceArnd Bergmann2-34/+0
All users of compat_alloc_user_space() and copy_in_user() have been removed from the kernel, only a few functions in sparc remain that can be changed to calling arch_copy_in_user() instead. Link: https://lkml.kernel.org/r/20210727144859.4150043-7-arnd@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric Biederman <ebiederm@xmission.com> Cc: Feng Tang <feng.tang@intel.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Paul Mackerras <paulus@samba.org> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-03Merge tag 'mips_5.15' of ↵Linus Torvalds3-3/+6
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux Pull MIPS updates from Thomas Bogendoerfer: - converted Pistachio platform to use MIPS generic kernel - fixes and cleanups * tag 'mips_5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (29 commits) MIPS: Malta: fix alignment of the devicetree buffer MIPS: ingenic: Unconditionally enable clock of CPU #0 MIPS: mscc: ocelot: mark the phy-mode for internal PHY ports MIPS: mscc: ocelot: disable all switch ports by default MAINTAINERS: adjust PISTACHIO SOC SUPPORT after its retirement MIPS: Return true/false (not 1/0) from bool functions MIPS: generic: Return true/false (not 1/0) from bool functions MIPS: Make a alias for pistachio_defconfig MIPS: Retire MACH_PISTACHIO MIPS: config: generic: Add config for Marduk board pinctrl: pistachio: Make it as an option phy: pistachio-usb: Depend on MIPS || COMPILE_TEST clocksource/drivers/pistachio: Make it selectable for MIPS clk: pistachio: Make it selectable for generic MIPS kernel MIPS: DTS: Pistachio add missing cpc and cdmm MIPS: generic: Allow generating FIT image for Marduk board MIPS: locking/atomic: Fix atomic{_64,}_sub_if_positive MIPS: loongson2ef: don't build serial.o unconditionally MIPS: Replace deprecated CPU-hotplug functions. MIPS: Alchemy: Fix spelling contraction "cant" -> "can't" ...
2021-09-03Merge branch 'akpm' (patches from Andrew)Linus Torvalds1-7/+1
Merge misc updates from Andrew Morton: "173 patches. Subsystems affected by this series: ia64, ocfs2, block, and mm (debug, pagecache, gup, swap, shmem, memcg, selftests, pagemap, mremap, bootmem, sparsemem, vmalloc, kasan, pagealloc, memory-failure, hugetlb, userfaultfd, vmscan, compaction, mempolicy, memblock, oom-kill, migration, ksm, percpu, vmstat, and madvise)" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (173 commits) mm/madvise: add MADV_WILLNEED to process_madvise() mm/vmstat: remove unneeded return value mm/vmstat: simplify the array size calculation mm/vmstat: correct some wrong comments mm/percpu,c: remove obsolete comments of pcpu_chunk_populated() selftests: vm: add COW time test for KSM pages selftests: vm: add KSM merging time test mm: KSM: fix data type selftests: vm: add KSM merging across nodes test selftests: vm: add KSM zero page merging test selftests: vm: add KSM unmerge test selftests: vm: add KSM merge test mm/migrate: correct kernel-doc notation mm: wire up syscall process_mrelease mm: introduce process_mrelease system call memblock: make memblock_find_in_range method private mm/mempolicy.c: use in_task() in mempolicy_slab_node() mm/mempolicy: unify the create() func for bind/interleave/prefer-many policies mm/mempolicy: advertise new MPOL_PREFERRED_MANY mm/hugetlb: add support for mempolicy MPOL_PREFERRED_MANY ...
2021-09-03mm: remove flush_kernel_dcache_pageChristoph Hellwig1-7/+1
flush_kernel_dcache_page is a rather confusing interface that implements a subset of flush_dcache_page by not being able to properly handle page cache mapped pages. The only callers left are in the exec code as all other previous callers were incorrect as they could have dealt with page cache pages. Replace the calls to flush_kernel_dcache_page with calls to flush_dcache_page, which for all architectures does either exactly the same thing, can contains one or more of the following: 1) an optimization to defer the cache flush for page cache pages not mapped into userspace 2) additional flushing for mapped page cache pages if cache aliases are possible Link: https://lkml.kernel.org/r/20210712060928.4161649-7-hch@lst.de Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Cc: Alex Shi <alexs@kernel.org> Cc: Geoff Levand <geoff@infradead.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Guo Ren <guoren@kernel.org> Cc: Helge Deller <deller@gmx.de> Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com> Cc: Nick Hu <nickhu@andestech.com> Cc: Paul Cercueil <paul@crapouillou.net> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Ulf Hansson <ulf.hansson@linaro.org> Cc: Vincent Chen <deanbo422@gmail.com> Cc: Yoshinori Sato <ysato@users.osdn.me> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-01Merge tag 'printk-for-5.15' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux Pull printk updates from Petr Mladek: - Optionally, provide an index of possible printk messages via <debugfs>/printk/index/. It can be used when monitoring important kernel messages on a farm of various hosts. The monitor has to be updated when some messages has changed or are not longer available by a newly deployed kernel. - Add printk.console_no_auto_verbose boot parameter. It allows to generate crash dump even with slow consoles in a reasonable time frame. - Remove printk_safe buffers. The messages are always stored directly to the main logbuffer, even in NMI or recursive context. Also it allows to serialize syslog operations by a mutex instead of a spin lock. - Misc clean up and build fixes. * tag 'printk-for-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux: printk/index: Fix -Wunused-function warning lib/nmi_backtrace: Serialize even messages about idle CPUs printk: Add printk.console_no_auto_verbose boot parameter printk: Remove console_silent() lib/test_scanf: Handle n_bits == 0 in random tests printk: syslog: close window between wait and read printk: convert @syslog_lock to mutex printk: remove NMI tracking printk: remove safe buffers printk: track/limit recursion lib/nmi_backtrace: explicitly serialize banner and regs printk: Move the printk() kerneldoc comment to its new home printk/index: Fix warning about missing prototypes MIPS/asm/printk: Fix build failure caused by printk printk: index: Add indexing support to dev_printk printk: Userspace format indexing support printk: Rework parse_prefix into printk_parse_prefix printk: Straighten out log_flags into printk_info_flags string_helpers: Escape double quotes in escape_special printk/console: Check consistent sequence number when handling race in console_unlock()
2021-09-01Merge branch 'siginfo-si_trapno-for-v5.15' of ↵Linus Torvalds1-2/+0
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace Pull siginfo si_trapno updates from Eric Biederman: "The full set of si_trapno changes was not appropriate as a fix for the newly added SIGTRAP TRAP_PERF, and so I postponed the rest of the related cleanups. This is the rest of the cleanups for si_trapno that reduces it from being a really weird arch special case that is expect to be always present (but isn't) on the architectures that support it to being yet another field in the _sigfault union of struct siginfo. The changes have been reviewed and marinated in linux-next. With the removal of this awkward special case new code (like SIGTRAP TRAP_PERF) that works across architectures should be easier to write and maintain" * 'siginfo-si_trapno-for-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: signal: Rename SIL_PERF_EVENT SIL_FAULT_PERF_EVENT for consistency signal: Verify the alignment and size of siginfo_t signal: Remove the generic __ARCH_SI_TRAPNO support signal/alpha: si_trapno is only used with SIGFPE and SIGTRAP TRAP_UNK signal/sparc: si_trapno is only used with SIGILL ILL_ILLTRP arm64: Add compile-time asserts for siginfo_t offsets arm: Add compile-time asserts for siginfo_t offsets sparc64: Add compile-time asserts for siginfo_t offsets
2021-08-31Merge tag 'net-next-5.15' of ↵Linus Torvalds2-13/+13
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Enable memcg accounting for various networking objects. BPF: - Introduce bpf timers. - Add perf link and opaque bpf_cookie which the program can read out again, to be used in libbpf-based USDT library. - Add bpf_task_pt_regs() helper to access user space pt_regs in kprobes, to help user space stack unwinding. - Add support for UNIX sockets for BPF sockmap. - Extend BPF iterator support for UNIX domain sockets. - Allow BPF TCP congestion control progs and bpf iterators to call bpf_setsockopt(), e.g. to switch to another congestion control algorithm. Protocols: - Support IOAM Pre-allocated Trace with IPv6. - Support Management Component Transport Protocol. - bridge: multicast: add vlan support. - netfilter: add hooks for the SRv6 lightweight tunnel driver. - tcp: - enable mid-stream window clamping (by user space or BPF) - allow data-less, empty-cookie SYN with TFO_SERVER_COOKIE_NOT_REQD - more accurate DSACK processing for RACK-TLP - mptcp: - add full mesh path manager option - add partial support for MP_FAIL - improve use of backup subflows - optimize option processing - af_unix: add OOB notification support. - ipv6: add IFLA_INET6_RA_MTU to expose MTU value advertised by the router. - mac80211: Target Wake Time support in AP mode. - can: j1939: extend UAPI to notify about RX status. Driver APIs: - Add page frag support in page pool API. - Many improvements to the DSA (distributed switch) APIs. - ethtool: extend IRQ coalesce uAPI with timer reset modes. - devlink: control which auxiliary devices are created. - Support CAN PHYs via the generic PHY subsystem. - Proper cross-chip support for tag_8021q. - Allow TX forwarding for the software bridge data path to be offloaded to capable devices. Drivers: - veth: more flexible channels number configuration. - openvswitch: introduce per-cpu upcall dispatch. - Add internet mix (IMIX) mode to pktgen. - Transparently handle XDP operations in the bonding driver. - Add LiteETH network driver. - Renesas (ravb): - support Gigabit Ethernet IP - NXP Ethernet switch (sja1105): - fast aging support - support for "H" switch topologies - traffic termination for ports under VLAN-aware bridge - Intel 1G Ethernet - support getcrosststamp() with PCIe PTM (Precision Time Measurement) for better time sync - support Credit-Based Shaper (CBS) offload, enabling HW traffic prioritization and bandwidth reservation - Broadcom Ethernet (bnxt) - support pulse-per-second output - support larger Rx rings - Mellanox Ethernet (mlx5) - support ethtool RSS contexts and MQPRIO channel mode - support LAG offload with bridging - support devlink rate limit API - support packet sampling on tunnels - Huawei Ethernet (hns3): - basic devlink support - add extended IRQ coalescing support - report extended link state - Netronome Ethernet (nfp): - add conntrack offload support - Broadcom WiFi (brcmfmac): - add WPA3 Personal with FT to supported cipher suites - support 43752 SDIO device - Intel WiFi (iwlwifi): - support scanning hidden 6GHz networks - support for a new hardware family (Bz) - Xen pv driver: - harden netfront against malicious backends - Qualcomm mobile - ipa: refactor power management and enable automatic suspend - mhi: move MBIM to WWAN subsystem interfaces Refactor: - Ambient BPF run context and cgroup storage cleanup. - Compat rework for ndo_ioctl. Old code removal: - prism54 remove the obsoleted driver, deprecated by the p54 driver. - wan: remove sbni/granch driver" * tag 'net-next-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1715 commits) net: Add depends on OF_NET for LiteX's LiteETH ipv6: seg6: remove duplicated include net: hns3: remove unnecessary spaces net: hns3: add some required spaces net: hns3: clean up a type mismatch warning net: hns3: refine function hns3_set_default_feature() ipv6: remove duplicated 'net/lwtunnel.h' include net: w5100: check return value after calling platform_get_resource() net/mlxbf_gige: Make use of devm_platform_ioremap_resourcexxx() net: mdio: mscc-miim: Make use of the helper function devm_platform_ioremap_resource() net: mdio-ipq4019: Make use of devm_platform_ioremap_resource() fou: remove sparse errors ipv4: fix endianness issue in inet_rtm_getroute_build_skb() octeontx2-af: Set proper errorcode for IPv4 checksum errors octeontx2-af: Fix static code analyzer reported issues octeontx2-af: Fix mailbox errors in nix_rss_flowkey_cfg octeontx2-af: Fix loop in free and unmap counter af_unix: fix potential NULL deref in unix_dgram_connect() dpaa2-eth: Replace strlcpy with strscpy octeontx2-af: Use NDC TX for transmit packet data ...
2021-08-30Merge tag 'for-5.15/block-2021-08-30' of git://git.kernel.dk/linux-blockLinus Torvalds1-2/+0
Pull block updates from Jens Axboe: "Nothing major in here - lots of good cleanups and tech debt handling, which is also evident in the diffstats. In particular: - Add disk sequence numbers (Matteo) - Discard merge fix (Ming) - Relax disk zoned reporting restrictions (Niklas) - Bio error handling zoned leak fix (Pavel) - Start of proper add_disk() error handling (Luis, Christoph) - blk crypto fix (Eric) - Non-standard GPT location support (Dmitry) - IO priority improvements and cleanups (Damien)o - blk-throtl improvements (Chunguang) - diskstats_show() stack reduction (Abd-Alrhman) - Loop scheduler selection (Bart) - Switch block layer to use kmap_local_page() (Christoph) - Remove obsolete disk_name helper (Christoph) - block_device refcounting improvements (Christoph) - Ensure gendisk always has a request queue reference (Christoph) - Misc fixes/cleanups (Shaokun, Oliver, Guoqing)" * tag 'for-5.15/block-2021-08-30' of git://git.kernel.dk/linux-block: (129 commits) sg: pass the device name to blk_trace_setup block, bfq: cleanup the repeated declaration blk-crypto: fix check for too-large dun_bytes blk-zoned: allow BLKREPORTZONE without CAP_SYS_ADMIN blk-zoned: allow zone management send operations without CAP_SYS_ADMIN block: mark blkdev_fsync static block: refine the disk_live check in del_gendisk mmc: sdhci-tegra: Enable MMC_CAP2_ALT_GPT_TEGRA mmc: block: Support alternative_gpt_sector() operation partitions/efi: Support non-standard GPT location block: Add alternative_gpt_sector() operation bio: fix page leak bio_add_hw_page failure block: remove CONFIG_DEBUG_BLOCK_EXT_DEVT block: remove a pointless call to MINOR() in device_add_disk null_blk: add error handling support for add_disk() virtio_blk: add error handling support for add_disk() block: add error handling for device_add_disk / add_disk block: return errors from disk_alloc_events block: return errors from blk_integrity_add block: call blk_register_queue earlier in device_add_disk ...
2021-08-13Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-6/+11
Conflicts: drivers/net/ethernet/broadcom/bnxt/bnxt_ptp.h 9e26680733d5 ("bnxt_en: Update firmware call to retrieve TX PTP timestamp") 9e518f25802c ("bnxt_en: 1PPS functions to configure TSIO pins") 099fdeda659d ("bnxt_en: Event handler for PPS events") kernel/bpf/helpers.c include/linux/bpf-cgroup.h a2baf4e8bb0f ("bpf: Fix potentially incorrect results with bpf_get_local_storage()") c7603cfa04e7 ("bpf: Add ambient BPF runtime context stored in current") drivers/net/ethernet/mellanox/mlx5/core/pci_irq.c 5957cc557dc5 ("net/mlx5: Set all field of mlx5_irq before inserting it to the xarray") 2d0b41a37679 ("net/mlx5: Refcount mlx5_irq with integer") MAINTAINERS 7b637cd52f02 ("MAINTAINERS: fix Microchip CAN BUS Analyzer Tool entry typo") 7d901a1e878a ("net: phy: add Maxlinear GPY115/21x/24x driver") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-06Merge tag 'mips-fixes_5.14_1' of ↵Linus Torvalds1-6/+11
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux Pull MIPS fix from Thomas Bogendoerfer: "Fix PMD accounting change" * tag 'mips-fixes_5.14_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: MIPS: check return value of pgtable_pmd_page_ctor
2021-08-05MIPS: check return value of pgtable_pmd_page_ctorHuang Pei1-6/+11
+. According to Documentation/vm/split_page_table_lock, handle failure of pgtable_pmd_page_ctor +. Use GFP_KERNEL_ACCOUNT instead of GFP_KERNEL|__GFP_ACCOUNT +. Adjust coding style Fixes: ed914d48b6a1 ("MIPS: add PMD table accounting into MIPS') Reported-by: Joshua Kinard <kumba@gentoo.org> Signed-off-by: Huang Pei <huangpei@loongson.cn> Reviewed-by: Joshua Kinard <kumba@gentoo.org> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-08-05MIPS: locking/atomic: Fix atomic{_64,}_sub_if_positiveRui Wang1-1/+1
This looks like a typo and that caused atomic64 test failed. Signed-off-by: Rui Wang <wangrui@loongson.cn> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-08-04sock: allow reading and changing sk_userlocks with setsockoptPavel Tikhomirov1-0/+2
SOCK_SNDBUF_LOCK and SOCK_RCVBUF_LOCK flags disable automatic socket buffers adjustment done by kernel (see tcp_fixup_rcvbuf() and tcp_sndbuf_expand()). If we've just created a new socket this adjustment is enabled on it, but if one changes the socket buffer size by setsockopt(SO_{SND,RCV}BUF*) it becomes disabled. CRIU needs to call setsockopt(SO_{SND,RCV}BUF*) on each socket on restore as it first needs to increase buffer sizes for packet queues restore and second it needs to restore back original buffer sizes. So after CRIU restore all sockets become non-auto-adjustable, which can decrease network performance of restored applications significantly. CRIU need to be able to restore sockets with enabled/disabled adjustment to the same state it was before dump, so let's add special setsockopt for it. Let's also export SOCK_SNDBUF_LOCK and SOCK_RCVBUF_LOCK flags to uAPI so that using these interface one can reenable automatic socket buffer adjustment on their sockets. Signed-off-by: Pavel Tikhomirov <ptikhomirov@virtuozzo.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-28 17:42:05 +0000