summaryrefslogtreecommitdiffstats
path: root/arch/mips/include/asm/netlogic
AgeCommit message (Collapse)AuthorFilesLines
2013-05-08MIPS: Netlogic: Remove unused EIMR/EIRR functionsJayachandran C1-6/+1
Remove the definitions of {read,write}_c0_{eirr,eimr}. These functions are now unused after the PIC and IRQ code has been updated to use optimized EIMR/EIRR functions which work on both 32-bit and 64-bit. Signed-off-by: Jayachandran C <jchandra@broadcom.com> Patchwork: http://patchwork.linux-mips.org/patch/5021/ Acked-by: John Crispin <blogic@openwrt.org>
2013-05-08MIPS: Netlogic: Optimize and fix write_c0_eimr()Jayachandran C1-8/+5
Remove the irq save/restore from write_c0_eimr(), as it is always called with interrupts off. This allows us to remove workaround in write_c0_eimr() to fix up the flags used by local_irq_save. This fixup worked on XLR, but will break when 32-bit support is added to r2 cpus like XLP. Signed-off-by: Jayachandran C <jchandra@broadcom.com> Patchwork: http://patchwork.linux-mips.org/patch/5022/ Acked-by: John Crispin <blogic@openwrt.org>
2013-02-21Merge branch 'mips-next-3.9' of ↵Ralf Baechle4-5/+136
git://git.linux-mips.org/pub/scm/john/linux-john into mips-for-linux-next
2013-02-17MIPS: Netlogic: Use PIC timer as a clocksourceJayachandran C2-5/+55
The XLR/XLS/XLP PIC has a 8 countdown timers which run at the PIC frequencey. One of these can be used as a clocksource to provide timestamps that is common across cores. This can be used in place of the count/compare clocksource which is per-CPU. On XLR/XLS PIC registers are 32-bit, so we just use the lower 32-bits of the PIC counter. On XLP, the whole 64-bit can be used. Provide common macros and functions for PIC timer registers on XLR/XLS and XLP, and use them to register a PIC clocksource. Signed-off-by: Jayachandran C <jchandra@broadcom.com> Patchwork: http://patchwork.linux-mips.org/patch/4786/ Signed-off-by: John Crispin <blogic@openwrt.org>
2013-02-17MIPS: Netlogic: Split XLP L1 i-cache among threadsJayachandran C1-0/+2
Since we now use r4k cache code for Netlogic XLP, it is better to split L1 icache among the active threads, so that threads won't step on each other while flushing icache. The L1 dcache is already split among the threads in the core. Signed-off-by: Jayachandran C <jchandra@broadcom.com> Patchwork: http://patchwork.linux-mips.org/patch/4787/ Signed-off-by: John Crispin <blogic@openwrt.org>
2013-02-17MIPS: Netlogic: Optimize EIMR/EIRR accesses in 32-bitJayachandran C1-0/+79
Provide functions ack_c0_eirr(), set_c0_eimr(), clear_c0_eimr() and read_c0_eirr_and_eimr() that do the EIMR and EIRR operations and update the interrupt handling code to use these functions. Also, use the EIMR register functions to mask interrupts in the irq code. The 64-bit interrupt request and mask registers (EIRR and EIMR) are accessed when the interrupts are off, and the common operations are to set or clear a bit in these registers. Using the 64-bit c0 access functions for these operations is not optimal in 32-bit, because it will disable/restore interrupts and split/join the 64-bit value during each register access. Signed-off-by: Jayachandran C <jchandra@broadcom.com> Patchwork: http://patchwork.linux-mips.org/patch/4790/ Signed-off-by: John Crispin <blogic@openwrt.org>
2013-02-01MIPS: Whitespace cleanup.Ralf Baechle13-374/+374
Having received another series of whitespace patches I decided to do this once and for all rather than dealing with this kind of patches trickling in forever. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-11-09MIPS: Netlogic: Support for XLR/XLS Fast Message NetworkGanesan Ramalingam5-5/+504
On XLR/XLS, the cpu cores communicate with fast on-chip devices (e.g. network accelerator, security engine etc.) using the Fast Messaging Network(FMN). The FMN queues and credits needs to be configured and intialized before it can be used. The co-processor 2 on XLR/XLS CPU cores has registers for FMN access, and the XLR/XLS has custom instructions for sending and loading messages. The FMN can deliver also per-cpu interrupts when messages are available at the CPU. This patch adds FMN initialization, adds interrupt setup and handling, and also provides support for sending and receiving FMN messages. Signed-off-by: Ganesan Ramalingam <ganesanr@broadcom.com> Signed-off-by: Jayachandran C <jchandra@broadcom.com> Patchwork: http://patchwork.linux-mips.org/patch/4468 Signed-off-by: John Crispin <blogic@openwrt.org>
2012-11-09MIPS: Netlogic: PIC IRQ handling update for multi-chipJayachandran C2-2/+1
Create struct nlm_pic_irq for interrupts handled by the PIC. This simplifies IRQ handling for multi-SoC as well as the single SoC cases. Also split the setup of percpu and PIC interrupts so that we can configure the PIC interrupts for every node. Signed-off-by: Jayachandran C <jchandra@broadcom.com> Patchwork: http://patchwork.linux-mips.org/patch/4467 Signed-off-by: John Crispin <blogic@openwrt.org>
2012-11-09MIPS: Netlogic: Make number of nodes configurableJayachandran C1-4/+5
There can be 1, 2 or 4 SoCs(nodes) in a multi-chip XLP board. Add an option for multi-chip boards in case of XLP, and make the number of nodes configurable. Signed-off-by: Jayachandran C <jchandra@broadcom.com> Patchwork: http://patchwork.linux-mips.org/patch/4470 Signed-off-by: John Crispin <blogic@openwrt.org>
2012-11-09MIPS: Netlogic: Support for multi-chip configurationJayachandran C5-9/+42
Upto 4 Netlogic XLP SoCs can be connected over ICI links to form a coherent multi-node system. Each SoC has its own set of on-chip devices including PIC. To support this, add a per SoC stucture and use it for the PIC and SYS block addresses instead of using global variables. Signed-off-by: Jayachandran C <jchandra@broadcom.com> Patchwork: http://patchwork.linux-mips.org/patch/4469 Signed-off-by: John Crispin <blogic@openwrt.org>
2012-11-09MIPS: Netlogic: Move from u32 cpumask to cpumask_tJayachandran C1-2/+5
Initial code to support more than 32 cpus. The platform CPU mask is updated from 32-bit mask to cpumask_t. Convert places that use cpu_/cpus_ functions to use cpumask_* functions. Signed-off-by: Jayachandran C <jchandra@broadcom.com> Patchwork: http://patchwork.linux-mips.org/patch/4464 Signed-off-by: John Crispin <blogic@openwrt.org>
2012-11-09MIPS: Netlogic: Update PIC access functionsJayachandran C1-33/+7
Remove unused and trivial PIC accesss functions, update nlm_pic_send_ipi() and nlm_set_irt_to_cpu() to use similar logic, and use correct type for reg in nlm_pic_disable_irt(). Signed-off-by: Jayachandran C <jchandra@broadcom.com> Patchwork: http://patchwork.linux-mips.org/patch/4463 Signed-off-by: John Crispin <blogic@openwrt.org>
2012-11-09MIPS: Netlogic: Fix interrupt table entry initJayachandran C1-1/+1
Used the hardware thread id passed in while writing to IRT in nlm_pic_init_irt() Signed-off-by: Jayachandran C <jchandra@broadcom.com> Patchwork: http://patchwork.linux-mips.org/patch/4465 Signed-off-by: John Crispin <blogic@openwrt.org>
2012-07-24MIPS: Netlogic: Add IRQ mappings for more devicesJayachandran C1-0/+3
Add IRT to IRQ translation for the MMC and I2C IRQs. Signed-off-by: Jayachandran C <jayachandranc@netlogicmicro.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/3761/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-07-24MIPS: Netlogic: USB support for XLPGanesan Ramalingam4-1/+75
The XLP USB controller appears as a device on the internal SoC PCIe bus, the block has 2 EHCI blocks and 4 OHCI blocks. Change are to: * Add files netlogic/xlp/usb-init.c and asm/netlogic/xlp-hal/usb.h to initialize the USB controller and define PCI fixups. The PCI fixups are to setup interrupts and DMA mask. * Update include/asm/xlp-hal/{iomap.h,pic.h,xlp.h} to add interrupt mapping for EHCI/OHCI interrupts. Signed-off-by: Ganesan Ramalingam <ganesanr@netlogicmicro.com> Signed-off-by: Jayachandran C <jayachandranc@netlogicmicro.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/3756/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-07-24MIPS: Netlogic: XLP PCIe controller support.Ganesan Ramalingam3-2/+85
Adds support for the XLP on-chip PCIe controller. On XLP, the on-chip devices(including the 4 PCIe links) appear in the PCIe configuration space of the XLP as PCI devices. The changes are to initialize and register the PCIe controller, enable hardware byte swap in the PCIe IO and MEM space, and to enable PCIe interrupts. Signed-off-by: Ganesan Ramalingam <ganesanr@netlogicmicro.com> Signed-off-by: Jayachandran C <jayachandranc@netlogicmicro.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/3760/ Patchwork: https://patchwork.linux-mips.org/patch/4104/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-07-24MIPS: Netlogic: Platform NAND/NOR flash supportGanesan Ramalingam2-0/+159
Changes to add support for the boot NOR flash on XLR boards and the boot NAND/NOR flash drivers on the XLS boards. Signed-off-by: Ganesan Ramalingam <ganesanr@netlogicmicro.com> Signed-off-by: Jayachandran C <jayachandranc@netlogicmicro.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/3758/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-07-24MIPS: Netlogic: Remove NETLOGIC_ prefixJayachandran C1-29/+30
Remove NETLOGIC_ prefix from gpio register definitions, this will bring it in-line with the other Netlogic headers. Having NETLOGIC prefix here is misleading because these are XLR/XLS specific register definitions. Signed-off-by: Jayachandran C <jayachandranc@netlogicmicro.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/3754/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-07-24MIPS: Netlogic: SMP wakeup code updateJayachandran C1-1/+3
Update for core intialization code. Initialize status register after receiving NMI for CPU wakeup. Add the low level L1D flush code before enabling threads in core. Also convert the ehb to _ehb so that it works under more GCC versions. Signed-off-by: Jayachandran C <jayachandranc@netlogicmicro.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/3755/ Patchwork: https://patchwork.linux-mips.org/patch/4095/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-12-07MIPS: Netlogic: Merge some of XLR/XLP wakup codeJayachandran C3-8/+27
Create a common NMI and reset handler in smpboot.S and use this for both XLR and XLP. In the earlier code, the woken up CPUs would busy wait until released, switch this to wakeup by NMI. The initial wakeup code or XLR and XLP are differ since they are started from different bootloaders (XLP from u-boot and XLR from netlogic bootloader). But in both platforms the woken up CPUs wait and are released by sending an NMI. Add support for starting XLR and XLP in 1/2/4 threads per core. Signed-off-by: Jayachandran C <jayachandranc@netlogicmicro.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2970/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-12-07MIPS: Netlogic: Add XLP platform files for XLP SoCJayachandran C8-0/+1229
- Update common files to support XLP. - Add arch/mips/include/asm/netlogic/xlp-hal for register definitions and access macros - Add arch/mips/netlogic/xlp/ for XLP specific files. Signed-off-by: Jayachandran C <jayachandranc@netlogicmicro.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2967/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-12-07MIPS: Netlogic: Move code common with XLP to common/Jayachandran C5-51/+249
- Move code that can be shared with XLP (irq.c, smp.c, time.c and xlr_console.c) to arch/mips/netlogic/common - Add asm/netlogic/haldefs.h and asm/netlogic/common.h for common and io functions shared with XLP - remove type 'nlm_reg_t *' and use uint64_t for mmio offsets - Move XLR specific code in smp.c to xlr/wakeup.c - Move XLR specific PCI code from irq.c to mips/pci/pci-xlr.c - Provide API for pic functions called from common/irq.c Signed-off-by: Jayachandran C <jayachandranc@netlogicmicro.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2964/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-12-07MIPS: Netlogic: Add basic MSI support for XLR/XLSGanesan Ramalingam1-0/+84
Add basic support for MSI. Signed-off-by: Ganesan Ramalingam <ganesanr@netlogicmicro.com> Signed-off-by: Jayachandran C <jayachandranc@netlogicmicro.com> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2730/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-05-19MIPS: XLR, XLS: Add PCI support.Jayachandran C1-0/+21
Adds pci/pci-xlr.c to support for XLR PCI/PCI-X interface and XLS PCIe interface. Update irq.c to ack PCI interrupts, use irq handler data to do the PCI/PCIe bus ack. Signed-off-by: Jayachandran C <jayachandranc@netlogicmicro.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2337/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-05-19MIPS: Platform files for XLR/XLS processor supportJayachandran C7-0/+719
* include/asm/netlogic added with files common for all Netlogic processors (common with XLP which will be added later) * include/asm/netlogic/xlr for XLR/XLS chip specific files * netlogic/xlr for XLR/XLS platform files Signed-off-by: Jayachandran C <jayachandranc@netlogicmicro.com> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2334/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
generated by cgit v1.2.3 (git 2.39.1) at 2025-04-06 17:15:34 +0000