summaryrefslogtreecommitdiffstats
path: root/arch/mips/boot
AgeCommit message (Collapse)AuthorFilesLines
2018-04-23MIPS: vmlinuz: Use generic ashldi3Matt Redfearn1-4/+7
In preparation for removing some of the MIPS compiler intrinsics from arch/mips/lib, first update the build of vmlinuz to use the generic ashldi3 from lib. Both ashldi3 and bswapsi objects need to be built with different CFLAGS for inclusion to vmlinuz rather than simply including the object built for the main kernel image. The objects cannot be built directly from source, since CONFIG_MODVERSIONS changes cmd_cc_o_c to prevent this. Split the rule to ship ashldi3 and bswapsi from the relevant source locations. These files make no reference to other files in their directory, so the additional CFLAGS are apparently unnecessary - remove them as well. Signed-off-by: Matt Redfearn <matt.redfearn@mips.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Antony Pavlov <antonynpavlov@gmail.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/19050/ [jhogan@kernel.org: Add if_changed and FORCE to fix build failure when arch/mips/boot/compressed/ashldi3.c is already generated but there is no .ashldi3.c.cmd file yet] Signed-off-by: James Hogan <jhogan@kernel.org>
2018-04-23MIPS: dts: Avoid unneeded built-in.a in DTS dirsMasahiro Yamada10-10/+10
arch/mips/boot/dts/Makefile collects objects from sub-directories into built-in.a only when CONFIG_BUILTIN_DTB is enabled. Reflect it also to the sub-directory Makefiles. This suppresses unneeded built-in.a creation in arch/mips/boot/dts/*/ directories. While I am here, I replaced $(patsubst %.dtb, %.dtb.o, $(dtb-y)) with $(addsuffix .o, $(dtb-y)) to simplify the code a little bit. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paul Cercueil <paul@crapouillou.net> Cc: Mathieu Malaterre <malat@debian.org> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/19099/ Signed-off-by: James Hogan <jhogan@kernel.org>
2018-04-20Merge tag 'mips_fixes_4.17_1' of ↵Linus Torvalds1-0/+6
git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/mips Pull MIPS fixes from James Hogan: - io: Add barriers to read*() & write*() - dts: Fix boston PCI bus DTC warnings (4.17) - memset: Several corner case fixes (one 3.10, others longer) * tag 'mips_fixes_4.17_1' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/mips: MIPS: uaccess: Add micromips clobbers to bzero invocation MIPS: memset.S: Fix clobber of v1 in last_fixup MIPS: memset.S: Fix return of __clear_user from Lpartial_fixup MIPS: memset.S: EVA & fault support for small_memset MIPS: dts: Boston: Fix PCI bus dtc warnings: MIPS: io: Add barrier after register read in readX() MIPS: io: Prevent compiler reordering writeX()
2018-04-16MIPS: dts: Boston: Fix PCI bus dtc warnings:Matt Redfearn1-0/+6
dtc recently (v1.4.4-8-g756ffc4f52f6) added PCI bus checks. Fix the warnings now emitted: arch/mips/boot/dts/img/boston.dtb: Warning (pci_bridge): /pci@10000000: missing bus-range for PCI bridge arch/mips/boot/dts/img/boston.dtb: Warning (pci_bridge): /pci@12000000: missing bus-range for PCI bridge arch/mips/boot/dts/img/boston.dtb: Warning (pci_bridge): /pci@14000000: missing bus-range for PCI bridge Signed-off-by: Matt Redfearn <matt.redfearn@mips.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paul Burton <paul.burton@mips.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/19070/ Signed-off-by: James Hogan <jhogan@kernel.org>
2018-04-10Merge tag 'mips_4.17' of ↵Linus Torvalds22-5/+604
git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/mips Pull MIPS updates from James Hogan: "These are the main MIPS changes for 4.17. Rough overview: (1) generic platform: Add support for Microsemi Ocelot SoCs (2) crypto: Add CRC32 and CRC32C HW acceleration module (3) Various cleanups and misc improvements More detailed summary: Miscellaneous: - hang more efficiently on halt/powerdown/restart - pm-cps: Block system suspend when a JTAG probe is present - expand make help text for generic defconfigs - refactor handling of legacy defconfigs - determine the entry point from the ELF file header to fix microMIPS for certain toolchains - introduce isa-rev.h for MIPS_ISA_REV and use to simplify other code Minor cleanups: - DTS: boston/ci20: Unit name cleanups and correction - kdump: Make the default for PHYSICAL_START always 64-bit - constify gpio_led in Alchemy, AR7, and TXX9 - silence a couple of W=1 warnings - remove duplicate includes Platform support: Generic platform: - add support for Microsemi Ocelot - dt-bindings: Add vendor prefix for Microsemi Corporation - dt-bindings: Add bindings for Microsemi SoCs - add ocelot SoC & PCB123 board DTS files - MAINTAINERS: Add entry for Microsemi MIPS SoCs - enable crc32-mips on r6 configs ath79: - fix AR724X_PLL_REG_PCIE_CONFIG offset BCM47xx: - firmware: Use mac_pton() for MAC address parsing - add Luxul XAP1500/XWR1750 WiFi LEDs - use standard reset button for Luxul XWR-1750 BMIPS: - enable CONFIG_BRCMSTB_PM in bmips_stb_defconfig for build coverage - add STB PM, wake-up timer, watchdog DT nodes Octeon: - drop '.' after newlines in printk calls ralink: - pci-mt7621: Enable PCIe on MT7688" * tag 'mips_4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/mips: (37 commits) MIPS: BCM47XX: Use standard reset button for Luxul XWR-1750 MIPS: BCM47XX: Add Luxul XAP1500/XWR1750 WiFi LEDs MIPS: Make the default for PHYSICAL_START always 64-bit MIPS: Use the entry point from the ELF file header MAINTAINERS: Add entry for Microsemi MIPS SoCs MIPS: generic: Add support for Microsemi Ocelot MIPS: mscc: Add ocelot PCB123 device tree MIPS: mscc: Add ocelot dtsi dt-bindings: mips: Add bindings for Microsemi SoCs dt-bindings: Add vendor prefix for Microsemi Corporation MIPS: ath79: Fix AR724X_PLL_REG_PCIE_CONFIG offset MIPS: pci-mt7620: Enable PCIe on MT7688 MIPS: pm-cps: Block system suspend when a JTAG probe is present MIPS: VDSO: Replace __mips_isa_rev with MIPS_ISA_REV MIPS: BPF: Replace __mips_isa_rev with MIPS_ISA_REV MIPS: cpu-features.h: Replace __mips_isa_rev with MIPS_ISA_REV MIPS: Introduce isa-rev.h to define MIPS_ISA_REV MIPS: Hang more efficiently on halt/powerdown/restart FIRMWARE: bcm47xx_nvram: Replace mac address parsing MIPS: BMIPS: Add Broadcom STB watchdog nodes ...
2018-04-05zboot: fix stack protector in compressed boot phaseHuacai Chen1-8/+1
Calling __stack_chk_guard_setup() in decompress_kernel() is too late that stack checking always fails for decompress_kernel() itself. So remove __stack_chk_guard_setup() and initialize __stack_chk_guard before we call decompress_kernel(). Original code comes from ARM but also used for MIPS and SH, so fix them together. If without this fix, compressed booting of these archs will fail because stack checking is enabled by default (>=4.16). Link: http://lkml.kernel.org/r/1522226933-29317-1-git-send-email-chenhc@lemote.com Fixes: 8779657d29c0 ("stackprotector: Introduce CONFIG_CC_STACKPROTECTOR_STRONG") Signed-off-by: Huacai Chen <chenhc@lemote.com> Acked-by: James Hogan <jhogan@kernel.org> Acked-by: Kees Cook <keescook@chromium.org> Acked-by: Rich Felker <dalias@libc.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Russell King <linux@arm.linux.org.uk> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Ingo Molnar <mingo@elte.hu> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-03-21MIPS: mscc: Add ocelot PCB123 device treeAlexandre Belloni2-0/+29
Add a device tree for the Microsemi Ocelot PCB123 evaluation board. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Allan Nielsen <Allan.Nielsen@microsemi.com> Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/18856/ Signed-off-by: James Hogan <jhogan@kernel.org>
2018-03-21MIPS: mscc: Add ocelot dtsiAlexandre Belloni3-0/+119
Add a device tree include file for the Microsemi Ocelot SoC. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Allan Nielsen <Allan.Nielsen@microsemi.com> Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/18855/ Signed-off-by: James Hogan <jhogan@kernel.org>
2018-03-06MIPS: BMIPS: Add Broadcom STB watchdog nodesJaedon Shin16-0/+88
Adds watchdog device nodes to BCM7xxx MIPS based SoCs. Signed-off-by: Jaedon Shin <jaedon.shin@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Kevin Cernekee <cernekee@gmail.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/17729/ Signed-off-by: James Hogan <jhogan@kernel.org>
2018-03-06MIPS: BMIPS: Add Broadcom STB wake-up timer nodesJaedon Shin12-0/+84
Adds wake-up timer device nodes to BCM7xxx MIPS based SoCs. Signed-off-by: Jaedon Shin <jaedon.shin@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Kevin Cernekee <cernekee@gmail.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/17728/ Signed-off-by: James Hogan <jhogan@kernel.org>
2018-03-06MIPS: BMIPS: Add Broadcom STB power management nodesJaedon Shin5-0/+279
Adds power management nodes to BCM7xxx MIPS based SoCs. Signed-off-by: Jaedon Shin <jaedon.shin@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Kevin Cernekee <cernekee@gmail.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/17727/ Signed-off-by: James Hogan <jhogan@kernel.org>
2018-02-22MIPS: boot: Define __ASSEMBLY__ for its.S buildKees Cook1-0/+1
The MIPS %.its.S compiler command did not define __ASSEMBLY__, which meant when compiler_types.h was added to kconfig.h, unexpected things appeared (e.g. struct declarations) which should not have been present. As done in the general %.S compiler command, __ASSEMBLY__ is now included here too. The failure was: Error: arch/mips/boot/vmlinux.gz.its:201.1-2 syntax error FATAL ERROR: Unable to parse input tree /usr/bin/mkimage: Can't read arch/mips/boot/vmlinux.gz.itb.tmp: Invalid argument /usr/bin/mkimage Can't add hashes to FIT blob Reported-by: kbuild test robot <lkp@intel.com> Fixes: 28128c61e08e ("kconfig.h: Include compiler types to avoid missed struct attributes") Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-02-19MIPS: dts: Fix a typo in the node unit nameMathieu Malaterre1-1/+1
The unit name was 8c00000 but since the reg property is declared as: reg = <0x0 0x4c00000 0x1 0xfb400000>; the unit name should have been instead 4c00000. Tested on MIPS Creator CI20 (v1): $ cat /sys/firmware/devicetree/.../partitions/partition@4c00000/label;echo system Reported-by: James Hogan <jhogan@kernel.org> Signed-off-by: Mathieu Malaterre <malat@debian.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Paul Cercueil <paul@crapouillou.net> Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/18529/ Signed-off-by: James Hogan <jhogan@kernel.org>
2018-02-19MIPS: dts: Remove leading 0x and 0s from bindings notationMathieu Malaterre2-5/+5
Improve the DTS files by removing all the leading "0x" and zeros to fix the following dtc warnings: Warning (unit_address_format): Node /XXX unit name should not have leading "0x" and Warning (unit_address_format): Node /XXX unit name should not have leading 0s Converted using the following command: find . -type f \( -iname *.dts -o -iname *.dtsi \) -exec sed -E -i -e "s/@0x([0-9a-fA-F\.]+)\s?\{/@\L\1 \{/g" -e "s/@0+([0-9a-fA-F\.]+)\s?\{/@\L\1 \{/g" {} + For simplicity, two sed expressions were used to solve each warnings separately. To make the regex expression more robust a few other issues were resolved, namely setting unit-address to lower case, and adding a whitespace before the the opening curly brace: https://elinux.org/Device_Tree_Linux#Linux_conventions This is a follow up to commit 4c9847b7375a ("dt-bindings: Remove leading 0x from bindings notation") Reported-by: David Daney <ddaney@caviumnetworks.com> Suggested-by: Rob Herring <robh@kernel.org> Signed-off-by: Mathieu Malaterre <malat@debian.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Paul Cercueil <paul@crapouillou.net> Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/18528/ Signed-off-by: James Hogan <jhogan@kernel.org>
2018-01-18MIPS: ingenic: Initial GCW Zero supportPaul Cercueil2-0/+63
The GCW Zero (http://www.gcw-zero.com) is a retro-gaming focused handheld game console, successfully kickstarted in ~2012, running Linux. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Acked-by: Mathieu Malaterre <malat@debian.org> Acked-by: Philippe Ombredanne <pombredanne@nexb.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Maarten ter Huurne <maarten@treewalker.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/18490/ Signed-off-by: James Hogan <jhogan@kernel.org>
2018-01-18MIPS: ingenic: Initial JZ4770 supportPaul Cercueil1-0/+212
Provide just enough bits (clocks, clocksource, uart) to allow a kernel to boot on the JZ4770 SoC to a initramfs userspace. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Reviewed-by: PrasannaKumar Muralidharan <prasannatsmkumar@gmail.com> Reviewed-by: James Hogan <jhogan@kernel.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Maarten ter Huurne <maarten@treewalker.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/18487/ Signed-off-by: James Hogan <jhogan@kernel.org>
2018-01-18MIPS: Fix clean of vmlinuz.{32,ecoff,bin,srec}James Hogan1-1/+5
Make doesn't expand shell style "vmlinuz.{32,ecoff,bin,srec}" to the 4 separate files, so none of these files get cleaned up by make clean. List the files separately instead. Fixes: ec3352925b74 ("MIPS: Remove all generated vmlinuz* files on "make clean"") Signed-off-by: James Hogan <jhogan@kernel.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/18491/
2017-11-18kbuild: remove all dummy assignments to obj-Masahiro Yamada12-36/+0
Now kbuild core scripts create empty built-in.o where necessary. Remove "obj- := dummy.o" tricks. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-11-15Merge tag 'mips_4.15' of ↵Linus Torvalds13-5/+29
git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/mips Pull MIPS updates from James Hogan: "These are the main MIPS changes for 4.15. Fixes: - ralink: Fix MT7620 PCI build issues (4.5) - Disable cmpxchg64() and HAVE_VIRT_CPU_ACCOUNTING_GEN for 32-bit SMP (4.1) - Fix MIPS64 FP save/restore on 32-bit kernels (4.0) - ptrace: Pick up ptrace/seccomp changed syscall numbers (3.19) - ralink: Fix MT7628 pinmux (3.19) - BCM47XX: Fix LED inversion on WRT54GSv1 (3.17) - Fix n32 core dumping as o32 since regset support (3.13) - ralink: Drop obsolete USB_ARCH_HAS_HCD select Build system: - Default to "generic" (multiplatform) system type instead of IP22 - Use generic little endian MIPS32 r2 configuration as default defconfig instead of ip22_defconfig FPU emulation: - Fix exception generation for certain R6 FPU instructions SMP: - Allow __cpu_number_map to be larger than NR_CPUS for sparse CPU id spaces Miscellaneous: - Add iomem resource for kernel bss section for kexec/kdump - Atomics: Nudge writes on bit unlock - DT files: Standardise "ok" -> "okay" Minor cleanups: - Define virt_to_pfn() - Make thread_saved_pc static - Simplify 32-bit sign extension in __read_64bit_c0_split() - DMA: Use vma_pages() helper - FPU emulation: Replace unsigned with unsigned int - MM: Removed unused lastpfn - Alchemy: Make clk_ops const - Lasat: Use setup_timer() helper - ralink: Use BIT() in MT7620 PCI driver Platform support: BMIPS: - Enable HARDIRQS_SW_RESEND Broadcom BCM63XX: - Add clkdev lookup support - Update clk driver, UART driver, DTs to handle named refclk from DTs - Split apart various clocks to more closely match hardware - Add ethernet clocks Cavium Octeon: - Remove usage of cvmx_wait() in favour of __delay() ImgTec Pistachio: - DT: Drop deprecated dwmmc num-slots property Ingenic JZ4780: - Add NFS root to Ci20 defconfig - Add watchdog to Ci20 DT & defconfig, and allow building of watchdog driver with this SoC Generic (multiplatform): - Migrate xilfpga (MIPSfpga) platform to the generic platform Lantiq xway: - Fix ASC0/ASC1 clocks" * tag 'mips_4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/mips: (46 commits) MIPS: Add iomem resource for kernel bss section. MIPS: cmpxchg64() and HAVE_VIRT_CPU_ACCOUNTING_GEN don't work for 32-bit SMP MIPS: BMIPS: Enable HARDIRQS_SW_RESEND MIPS: pci: Make use of the BIT() macro inside the mt7620 driver MIPS: pci: Remove KERN_WARN instance inside the mt7620 driver MIPS: pci: Remove duplicate define in mt7620 driver MIPS: ralink: Fix typo in mt7628 pinmux function MIPS: ralink: Fix MT7628 pinmux MIPS: Fix odd fp register warnings with MIPS64r2 watchdog: jz4780: Allow selection of jz4740-wdt driver MIPS/ptrace: Update syscall nr on register changes MIPS/ptrace: Pick up ptrace/seccomp changed syscalls MIPS: Fix an n32 core file generation regset support regression MIPS: Fix MIPS64 FP save/restore on 32-bit kernels MIPS: page.h: Define virt_to_pfn() MIPS: Xilfpga: Switch to using generic defconfigs MIPS: generic: Add support for MIPSfpga MIPS: Set defconfig target to a generic system for 32r2el MIPS: Kconfig: Set default MIPS system type as generic MIPS: DTS: Remove num-slots from Pistachio SoC ...
2017-11-14Merge tag 'devicetree-for-4.15' of ↵Linus Torvalds14-58/+13
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull DeviceTree updates from Rob Herring: "A bigger diffstat than usual with the kbuild changes and a tree wide fix in the binding documentation. Summary: - kbuild cleanups and improvements for dtbs - Code clean-up of overlay code and fixing for some long standing memory leak and race condition in applying overlays - Improvements to DT memory usage making sysfs/kobjects optional and skipping unflattening of disabled nodes. This is part of kernel tinification efforts. - Final piece of removing storing the full path for every DT node. The prerequisite conversion of printk's to use device_node format specifier happened in 4.14. - Sync with current upstream dtc. This brings additional checks to dtb compiling. - Binding doc tree wide removal of leading 0s from examples - RTC binding documentation adding missing devices and some consolidation of duplicated bindings - Vendor prefix documentation for nutsboard, Silicon Storage Technology, shimafuji, Tecon Microprocessor Technologies, DH electronics GmbH, Opal Kelly, and Next Thing" * tag 'devicetree-for-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (55 commits) dt-bindings: usb: add #phy-cells to usb-nop-xceiv dt-bindings: Remove leading zeros from bindings notation kbuild: handle dtb-y and CONFIG_OF_ALL_DTBS natively in Makefile.lib MIPS: dts: remove bogus bcm96358nb4ser.dtb from dtb-y entry kbuild: clean up *.dtb and *.dtb.S patterns from top-level Makefile .gitignore: move *.dtb and *.dtb.S patterns to the top-level .gitignore .gitignore: sort normal pattern rules alphabetically dt-bindings: add vendor prefix for Next Thing Co. scripts/dtc: Update to upstream version v1.4.5-6-gc1e55a5513e9 of: dynamic: fix memory leak related to properties of __of_node_dup of: overlay: make pr_err() string unique of: overlay: pr_err from return NOTIFY_OK to overlay apply/remove of: overlay: remove unneeded check for NULL kbasename() of: overlay: remove a dependency on device node full_name of: overlay: simplify applying symbols from an overlay of: overlay: avoid race condition between applying multiple overlays of: overlay: loosen overly strict phandle clash check of: overlay: expand check of whether overlay changeset can be removed of: overlay: detect cases where device tree may become corrupt of: overlay: minor restructuring ...
2017-11-09kbuild: handle dtb-y and CONFIG_OF_ALL_DTBS natively in Makefile.libMasahiro Yamada13-43/+13
If CONFIG_OF_ALL_DTBS is enabled, "make ARCH=arm64 dtbs" compiles each DTB twice; one from arch/arm64/boot/dts/*/Makefile and the other from the dtb-$(CONFIG_OF_ALL_DTBS) line in arch/arm64/boot/dts/Makefile. It could be a race problem when building DTBS in parallel. Another minor issue is CONFIG_OF_ALL_DTBS covers only *.dts in vendor sub-directories, so this broke when Broadcom added one more hierarchy in arch/arm64/boot/dts/broadcom/<soc>/. One idea to fix the issues in a clean way is to move DTB handling to Kbuild core scripts. Makefile.dtbinst already recognizes dtb-y natively, so it should not hurt to do so. Add $(dtb-y) to extra-y, and $(dtb-) as well if CONFIG_OF_ALL_DTBS is enabled. All clutter things in Makefiles go away. As a bonus clean-up, I also removed dts-dirs. Just use subdir-y directly to traverse sub-directories. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Arnd Bergmann <arnd@arndb.de> [robh: corrected BUILTIN_DTB to CONFIG_BUILTIN_DTB] Signed-off-by: Rob Herring <robh@kernel.org>
2017-11-09MIPS: dts: remove bogus bcm96358nb4ser.dtb from dtb-y entryMasahiro Yamada1-1/+0
arch/mips/boot/dts/brcm/bcm96358nb4ser.dts does not exist, so we cannot build bcm96358nb4ser.dtb . Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Fixes: 695835511f96 ("MIPS: BMIPS: rename bcm96358nb4ser to bcm6358-neufbox4-sercom") Cc: stable@vger.kernel.org # 4.9+ Acked-by: James Hogan <jhogan@kernel.org> Signed-off-by: Rob Herring <robh@kernel.org>
2017-11-08MIPS: generic: Add support for MIPSfpgaZubair Lutfullah Kakakhel2-1/+9
Add support for the MIPSfpga platform to generic kernel. Signed-off-by: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/15846/ [jhogan@kernel.org: Use separate board-xilfpga.its.S. Add 32r2 and little endian requires to board-xilfpga.config] Signed-off-by: James Hogan <jhogan@kernel.org>
2017-11-08MIPS: DTS: Remove num-slots from Pistachio SoCShawn Lin1-1/+0
dwmmc driver deprecated num-slots and plan to get rid of it finally. Just move a step to cleanup it from DT. Cc: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Acked-by: James Hartley <james.hartley@sondrel.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Jaehoon Chung <jh80.chung@samsung.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/16741/ Signed-off-by: James Hogan <jhogan@kernel.org>
2017-11-08kbuild: clean up *.dtb and *.dtb.S patterns from top-level MakefileMasahiro Yamada13-13/+0
We need to add "clean-files" in Makfiles to clean up DT blobs, but we often miss to do so. Since there are no source files that end with .dtb or .dtb.S, so we can clean-up those files from the top-level Makefile. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Rob Herring <robh@kernel.org>
2017-11-08.gitignore: move *.dtb and *.dtb.S patterns to the top-level .gitignoreMasahiro Yamada1-1/+0
Most of DT files are compiled under arch/*/boot/dts/, but we have some other directories, like drivers/of/unittest-data/. We often miss to add gitignore patterns per directory. Since there are no source files that end with .dtb or .dtb.S, we can ignore the patterns globally. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Rob Herring <robh@kernel.org>
2017-11-07MIPS: Standardize DTS files, status "ok" -> "okay"Robert P. J. Day3-3/+3
While the current kernel code in drivers/of/ allows developers to be sloppy and use the status value "ok", the current DTSpec 0.1 makes it clear that the only officially proper spelling is "okay", so adjust the very small number of DTS files under arch/mips/. Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/17227/ Signed-off-by: James Hogan <jhogan@kernel.org>
2017-11-07MIPS: BMIPS: name the refclk clock for uartJonas Gorski6-0/+12
Add the clock name to the uart nodes, to name the input clock properly. Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Kevin Cernekee <cernekee@gmail.com> Cc: Russell King <linux@armlinux.org.uk> Cc: linux-mips@linux-mips.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-serial@vger.kernel.org Cc: devicetree@vger.kernel.org Cc: bcm-kernel-feedback-list@broadcom.com Patchwork: https://patchwork.linux-mips.org/patch/17329/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: James Hogan <jhogan@kernel.org>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman92-0/+92
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-09MIPS: jz4780: DTS: Probe the jz4740-watchdog driver from devicetreeMathieu Malaterre1-0/+5
The jz4740-watchdog driver supports both jz4740 & jz4780. Signed-off-by: Mathieu Malaterre <malat@debian.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Paul Cercueil <paul@crapouillou.net> Cc: PrasannaKumar Muralidharan <prasannatsmkumar@gmail.com> Cc: devicetree@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/17291/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-09-06MIPS: jz4780: DTS: Probe the jz4740-rtc driver from devicetreeMathieu Malaterre1-0/+11
The jz4740-rtc driver supports both jz4740 & jz4780, setup the compatible string to jz4780. Signed-off-by: Mathieu Malaterre <malat@debian.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Paul Cercueil <paul@crapouillou.net> Cc: Krzysztof Kozlowski <krzk@kernel.org> Cc: devicetree@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/17237/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-08-29MIPS: Add Onion Omega2+ boardHarvey Hunt2-0/+19
The Onion Omega2+ is an MT7688A based board that has 128MB RAM and multiple peripherals. The MT7688A is pin compatible with the MT7628A, although the former supports a 1T1R antenna whereas the MT7628A supports a 2R2T antenna. Signed-off-by: Harvey Hunt <harvey.hunt@imgtec.com> Cc: robh+dt@kernel.org Cc: mark.rutland@arm.com Cc: john@phrozen.org Cc: linux-kernel@vger.kernel.org Cc: devicetree@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/17137/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-08-29MIPS: dts: Add Vocore2 boardHarvey Hunt2-0/+19
The VoCore2 board is a low cost MT7628A based board with 128MB RAM, 16MB flash and multiple external peripherals. This initial DTS provides enough support to get to userland and use the USB port. Signed-off-by: Harvey Hunt <harvey.hunt@imgtec.com> Cc: robh+dt@kernel.org Cc: mark.rutland@arm.com Cc: john@phrozen.org Cc: linux-kernel@vger.kernel.org Cc: devicetree@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/17134/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-08-29MIPS: dts: ralink: Add Mediatek MT7628A SoCHarvey Hunt1-0/+126
The MT7628A is the successor to the MT7620 and pin compatible with the MT7688A, although the latter supports only a 1T1R antenna rather than a 2T2R antenna. This commit adds support for the following features: - UART - USB PHY - EHCI - Interrupt controller - System controller - Memory controller - Reset controller Signed-off-by: Harvey Hunt <harvey.hunt@imgtec.com> Cc: robh+dt@kernel.org Cc: mark.rutland@arm.com Cc: john@phrozen.org Cc: Harvey Hunt <harvey.hunt@imgtec.com> Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: linux-mediatek@lists.infradead.org Patchwork: https://patchwork.linux-mips.org/patch/17133/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-08-29MIPS: dts: Ci20: Add ethernet and fixed-regulator nodesHarvey Hunt1-0/+37
Add devicetree nodes for the DM9000 and the ethernet power regulator. Additionally, add a new pinctrl node for the ethernet chip's pins. Signed-off-by: Harvey Hunt <harvey.hunt@imgtec.com> Cc: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Paul Cercueil <paul@crapouillou.net> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: devicetree@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/16752/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-08-29MIPS: Allow platform to specify multiple its.S filesPaul Burton1-5/+11
In preparation for splitting arch/mips/generic/vmlinux.its.S into multiple files such that it doesn't become a conflict magnet as boards are added, allow platforms to specify a list of image tree source files which will be concatenated to form the final source used to build the image tree. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/16938/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-08-29MIPS: NI 169445 board supportNathan Sullivan3-0/+108
Support the National Instruments 169445 board. Signed-off-by: Nathan Sullivan <nathan.sullivan@ni.com> Acked-by: Rob Herring <robh@kernel.org> Cc: devicetree@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/16782/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-08-07MIPS: gitignore: ignore generated .c filesBartosz Golaszewski1-0/+2
Add ashldi3.c and bswapsi.c to the list of ignored files. Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl> Reviewed-by: James Hogan <james.hogan@imgtec.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/16905/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-07-15Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds3-15/+238
Pull MIPS updates from Ralf Baechle: "Boston platform support: - Document DT bindings - Add CLK driver for board clocks CM: - Avoid per-core locking with CM3 & higher - WARN on attempt to lock invalid VP, not BUG CPS: - Select CONFIG_SYS_SUPPORTS_SCHED_SMT for MIPSr6 - Prevent multi-core with dcache aliasing - Handle cores not powering down more gracefully - Handle spurious VP starts more gracefully DSP: - Add lwx & lhx missaligned access support eBPF: - Add MIPS support along with many supporting change to add the required infrastructure Generic arch code: - Misc sysmips MIPS_ATOMIC_SET fixes - Drop duplicate HAVE_SYSCALL_TRACEPOINTS - Negate error syscall return in trace - Correct forced syscall errors - Traced negative syscalls should return -ENOSYS - Allow samples/bpf/tracex5 to access syscall arguments for sane traces - Cleanup from old Kconfig options in defconfigs - Fix PREF instruction usage by memcpy for MIPS R6 - Fix various special cases in the FPU eulation - Fix some special cases in MIPS16e2 support - Fix MIPS I ISA /proc/cpuinfo reporting - Sort MIPS Kconfig alphabetically - Fix minimum alignment requirement of IRQ stack as required by ABI / GCC - Fix special cases in the module loader - Perform post-DMA cache flushes on systems with MAARs - Probe the I6500 CPU - Cleanup cmpxchg and add support for 1 and 2 byte operations - Use queued read/write locks (qrwlock) - Use queued spinlocks (qspinlock) - Add CPU shared FTLB feature detection - Handle tlbex-tlbp race condition - Allow storing pgd in C0_CONTEXT for MIPSr6 - Use current_cpu_type() in m4kc_tlbp_war() - Support Boston in the generic kernel Generic platform: - yamon-dt: Pull YAMON DT shim code out of SEAD-3 board - yamon-dt: Support > 256MB of RAM - yamon-dt: Use serial* rather than uart* aliases - Abstract FDT fixup application - Set RTC_ALWAYS_BCD to 0 - Add a MAINTAINERS entry core kernel: - qspinlock.c: include linux/prefetch.h Loongson 3: - Add support Perf: - Add I6500 support SEAD-3: - Remove GIC timer from DT - Set interrupt-parent per-device, not at root node - Fix GIC interrupt specifiers SMP: - Skip IPI setup if we only have a single CPU VDSO: - Make comment match reality - Improvements to time code in VDSO" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (86 commits) locking/qspinlock: Include linux/prefetch.h MIPS: Fix MIPS I ISA /proc/cpuinfo reporting MIPS: Fix minimum alignment requirement of IRQ stack MIPS: generic: Support MIPS Boston development boards MIPS: DTS: img: Don't attempt to build-in all .dtb files clk: boston: Add a driver for MIPS Boston board clocks dt-bindings: Document img,boston-clock binding MIPS: Traced negative syscalls should return -ENOSYS MIPS: Correct forced syscall errors MIPS: Negate error syscall return in trace MIPS: Drop duplicate HAVE_SYSCALL_TRACEPOINTS select MIPS16e2: Provide feature overrides for non-MIPS16 systems MIPS: MIPS16e2: Report ASE presence in /proc/cpuinfo MIPS: MIPS16e2: Subdecode extended LWSP/SWSP instructions MIPS: MIPS16e2: Identify ASE presence MIPS: VDSO: Fix a mismatch between comment and preprocessor constant MIPS: VDSO: Add implementation of gettimeofday() fallback MIPS: VDSO: Add implementation of clock_gettime() fallback MIPS: VDSO: Fix conversions in do_monotonic()/do_monotonic_coarse() MIPS: Use current_cpu_type() in m4kc_tlbp_war() ...
2017-07-11MIPS: generic: Support MIPS Boston development boardsPaul Burton2-0/+226
Add support for the MIPS Boston development board to generic kernels, which essentially amounts to: - Adding the device tree source for the MIPS Boston board. - Adding a Kconfig fragment which enables the appropriate drivers for the MIPS Boston board. With these changes in place generic kernels will support the board by default, and kernels with only the drivers needed for Boston enabled can be configured by setting BOARDS=boston during configuration. For example: $ make ARCH=mips 64r6el_defconfig BOARDS=boston Signed-off-by: Paul Burton <paul.burton@imgtec.com> Reviewed-by: James Hogan <james.hogan@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/16485/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-07-11MIPS: DTS: img: Don't attempt to build-in all .dtb filesPaul Burton1-2/+1
When building a FIT image we may want the kernel to build multiple .dtb files, but we don't want to build them all into the kernel binary as object files since they'll instead be included in the FIT image. Commit daa10170da27 ("MIPS: DTS: img: add device tree for Marduk board") however created arch/mips/boot/dts/img/Makefile with a line that builds any enabled .dtb files into the kernel. Remove this & build the pistachio object specifically, in preparation for adding .dtb targets which we don't want to build into the kernel. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Rahul Bedarkar <rahulbedarkar89@gmail.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/16484/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-06-29Merge tag 'v4.12-rc7' into develLinus Walleij1-5/+5
Linux 4.12-rc7
2017-06-28MIPS: SEAD-3: Fix GIC interrupt specifiersPaul Burton1-4/+4
The various interrupt specifiers in the device tree are not in a valid format for the MIPS GIC interrupt controller binding. Where each interrupt should provide 3 values - GIC_LOCAL or GIC_SHARED, the pin number & the type of interrupt - the device tree was only providing the pin number. This causes interrupts for those devices to not be used when a GIC is present. SEAD-3 systems without a GIC are unaffected since the DT fixup code generates interrupt specifiers that are valid for the CPU interrupt controller. Fix this by adding the GIC_SHARED & IRQ_TYPE_LEVEL_HIGH values to each interrupt specifier. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Fixes: c11e3b48dbc3 ("MIPS: SEAD3: Probe UARTs using DT") Fixes: a34e93882de4 ("MIPS: SEAD3: Probe ethernet controller using DT") Fixes: 7afd2a5aec2e ("MIPS: SEAD3: Probe EHCI controller using DT") Cc: linux-mips@linux-mips.org Cc: stable@vger.kernel.org # v4.9+ Patchwork: https://patchwork.linux-mips.org/patch/16189/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-06-28MIPS: SEAD-3: Set interrupt-parent per-device, not at root nodePaul Burton1-1/+4
The SEAD-3 board may be configured with or without a MIPS Global Interrupt Controller (GIC). Because of this we have a device tree with a default case of a GIC present, and code to fixup the device tree based upon a configuration register that indicates the presence of the GIC. In order to keep this DT fixup code simple, the interrupt-parent property was specified at the root node of the SEAD-3 DT, allowing the fixup code to simply change this property to the phandle of the CPU interrupt controller if a GIC is not present & affect all interrupt-using devices at once. This however causes a problem if we do have a GIC & the device tree is used as-is, because the interrupt-parent property of the root node applies to the CPU interrupt controller node. This causes a cycle when of_irq_init() attempts to probe interrupt controllers in order and boots fail due to a lack of configured interrupts, with this message printed on the kernel console: [ 0.000000] OF: of_irq_init: children remain, but no parents Fix this by removing the interrupt-parent property from the DT root node & instead setting it for each device which uses interrupts, ensuring that the CPU interrupt controller node has no interrupt-parent & allowing of_irq_init() to identify it as the root interrupt controller. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Reported-by: Keng Koh <keng.koh@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/16187/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-06-28MIPS: generic/yamon-dt: Use serial* rather than uart* aliasesPaul Burton1-3/+3
Name aliases in the SEAD-3 device tree serial0 & serial1, rather than uart0 & uart1. This allows the core serial code to make use of the aliases to ensure that the UARTs are consistently numbered as expected rather than having the numbering depend upon probe order. When translating YAMON-provided serial configuration to a device tree stdout-path property adjust accordingly, such that we continue to reference a valid alias. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/16183/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-06-28MIPS: SEAD-3: Remove GIC timer from DTPaul Burton1-5/+0
The SEAD-3 board doesn't & never has configured the GIC frequency. Remove the timer node from the DT in order to avoid attempting to probe the GIC clocksource/clockevent driver which will produce error messages such as these during boot: [ 0.000000] GIC frequency not specified. [ 0.000000] Failed to initialize '/interrupt-controller@1b1c0000/timer': -22 [ 0.000000] clocksource_probe: no matching clocksources found Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/16188/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-06-15MIPS: .its targets depend on vmlinuxPaul Burton1-5/+5
The .its targets require information about the kernel binary, such as its entry point, which is extracted from the vmlinux ELF. We therefore require that the ELF is built before the .its files are generated. Declare this requirement in the Makefile such that make will ensure this is always the case, otherwise in corner cases we can hit issues as the .its is generated with an incorrect (either invalid or stale) entry point. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Fixes: cf2a5e0bb4c6 ("MIPS: Support generating Flattened Image Trees (.itb)") Cc: linux-mips@linux-mips.org Cc: stable <stable@vger.kernel.org> # v4.9+ Patchwork: https://patchwork.linux-mips.org/patch/16179/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-05-22MIPS: JZ4780: CI20: Add pinctrl configuration for several driversPaul Cercueil1-0/+60
We set the pin configuration for the jz4780-nand and jz4780-uart drivers. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-05-22MIPS: JZ4740: Qi LB60: Add pinctrl configuration for several driversPaul Cercueil1-0/+13
We set the pin configuration for the jz4740-nand, jz4740-mmc, jz4740-fb, jz4740-pwm and jz4740-uart drivers. This will permit those drivers to be cleaned out of the custom GPIO code that they currently use. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-05-22MIPS: jz4780: DTS: Add nodes for ingenic pinctrl and gpio driversPaul Cercueil1-0/+98
For a description of the devicetree node, please read Documentation/devicetree/bindings/pinctrl/ingenic,pinctrl.txt For a description of the gpio devicetree nodes, please read Documentation/devicetree/bindings/gpio/ingenic,gpio.txt Signed-off-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>