summaryrefslogtreecommitdiffstats
path: root/arch/microblaze
AgeCommit message (Collapse)AuthorFilesLines
2013-06-03microblaze: Use static inline functions in cacheflush.hMichal Simek1-16/+18
Using static inline functions ensure proper type checking which also remove compilation warning for no MMU Compilation warning: arch/microblaze/include/asm/cacheflush.h: warning: 'addr' may be used uninitialized in this function [-Wmaybe-uninitialized] Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2013-06-03microblaze: Fix sparse warningsMichal Simek1-2/+2
arch/microblaze/include/asm/uaccess.h:101:3: warning: cast removes address space of expression arch/microblaze/include/asm/uaccess.h:107:2: warning: cast removes address space of expression Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2013-05-27microblaze: Reversed logic in futex cmpxchgMeyer, Kirk1-1/+1
futex_atomic_cmpxchg_inatomic exchanged if the values were unequal rather than equal. This caused incorrect behavior of robust futexes. Signed-off-by: Kirk Meyer <kirk.meyer@sencore.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2013-05-23microblaze: Use proper casting for inb/inw/inl in io.hMichal Simek1-3/+3
We are going to move to asm-generic/io.h but let's fix compilation warnings first for 3.10. Warning message: arch/microblaze/include/asm/io.h:126:26: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] #define inb(port) readb((u8 *)((port))) ... Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2013-05-14microblaze: Initialize temp variable to remove compilation warningMichal Simek1-1/+1
Compilation warning: arch/microblaze/kernel/cpu/cache.c:148:2: warning: 'temp' is used uninitialized in this function [-Wuninitialized] Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2013-05-10Merge branch 'next' of git://git.monstr.eu/linux-2.6-microblazeLinus Torvalds9-29/+46
Pull microblaze updates from Michal Simek. * 'next' of git://git.monstr.eu/linux-2.6-microblaze: microblaze: Enable IRQ in arch_cpu_idle microblaze: Fix uaccess_ok macro microblaze: Add support for new cpu versions and target architecture microblaze: Do not select OPT_LIB_ASM by default microblaze: Fix initrd support microblaze: Do not use r6 in head.S microblaze: pci: Remove duplicated header microblaze: Set the default irq_domain microblaze: pci: Remove duplicated include from pci-common.c
2013-05-09Merge tag 'gpio-for-linus' of git://git.secretlab.ca/git/linuxLinus Torvalds1-3/+0
Pull removal of GENERIC_GPIO from Grant Likely: "GENERIC_GPIO now synonymous with GPIOLIB. There are no longer any valid cases for enableing GENERIC_GPIO without GPIOLIB, even though it is possible to do so which has been causing confusion and breakage. This branch does the work to completely eliminate GENERIC_GPIO." * tag 'gpio-for-linus' of git://git.secretlab.ca/git/linux: gpio: update gpio Chinese documentation Remove GENERIC_GPIO config option Convert selectors of GENERIC_GPIO to GPIOLIB blackfin: force use of gpiolib m68k: coldfire: use gpiolib mips: pnx833x: remove requirement for GENERIC_GPIO openrisc: default GENERIC_GPIO to false avr32: default GENERIC_GPIO to false xtensa: remove explicit selection of GENERIC_GPIO sh: replace CONFIG_GENERIC_GPIO by CONFIG_GPIOLIB powerpc: remove redundant GENERIC_GPIO selection unicore32: default GENERIC_GPIO to false unicore32: remove unneeded select GENERIC_GPIO arm: plat-orion: use GPIO driver on CONFIG_GPIOLIB arm: remove redundant GENERIC_GPIO selection mips: alchemy: require gpiolib mips: txx9: change GENERIC_GPIO to GPIOLIB mips: loongson: use GPIO driver on CONFIG_GPIOLIB mips: remove redundant GENERIC_GPIO select
2013-05-09microblaze: Enable IRQ in arch_cpu_idleMichal Simek1-0/+5
Microblaze requires to enable IRQ in cpu_idle loop. It should be the part of this patch: "microblaze: Use generic idle loop" (sha1: e962bb9e9cf73b8c8893c95903e791dd5ec19fb4) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2013-05-09microblaze: Fix uaccess_ok macroMichal Simek1-11/+19
Fix access_ok macro no to permit case where user will try to access the last address space which is equal to segment address. Example: segment addr = 0xbfff ffff address = 0xbfff fff0 size = 0x10 Current wrong implementation 0xbfff ffff >= (0xbfff fff0 | 0x10 | (0xbfff fff0 + 0x10)) 0xbfff ffff >= (0xbfff fff0 | 0xc000 0000) 0xbfff ffff >= 0xf000 0000 return 0 which is access failed even the combination is valid. because get_fs().seq returns the last valid address. This patch fix this problem. Size equals to zero is valid access. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2013-05-09microblaze: Add support for new cpu versions and target architectureMichal Simek1-0/+5
Update PVR values based on reference manual. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2013-05-09microblaze: Do not select OPT_LIB_ASM by defaultMichal Simek1-1/+0
This option is valid only for BE systems. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2013-05-09microblaze: Fix initrd supportMichal Simek1-4/+5
Initrd/ramdisk support has been never validated. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2013-05-09microblaze: Do not use r6 in head.SMichal Simek1-10/+10
r6 stores pointer to ramdisk and shouldn't be used before it is passed to machine_early_init. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2013-05-09microblaze: pci: Remove duplicated headerMichal Simek1-2/+0
Remove duplicated header. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2013-05-09microblaze: Set the default irq_domainDan Christensen1-0/+2
Register the irq_domain created during initialization as the default so that device drivers can pass NULL to irq_create_mapping and get a virtual irq to pass to request_irq. Signed-off-by: Dan Christensen <opello@opello.org> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2013-05-09microblaze: pci: Remove duplicated include from pci-common.cWei Yongjun1-1/+0
Remove duplicated include. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2013-05-01Merge branch 'for-linus' of ↵Linus Torvalds1-8/+0
git://git.kernel.org/pub/scm/linux/kernel/git/viro/signal Pull compat cleanup from Al Viro: "Mostly about syscall wrappers this time; there will be another pile with patches in the same general area from various people, but I'd rather push those after both that and vfs.git pile are in." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/signal: syscalls.h: slightly reduce the jungles of macros get rid of union semop in sys_semctl(2) arguments make do_mremap() static sparc: no need to sign-extend in sync_file_range() wrapper ppc compat wrappers for add_key(2) and request_key(2) are pointless x86: trim sys_ia32.h x86: sys32_kill and sys32_mprotect are pointless get rid of compat_sys_semctl() and friends in case of ARCH_WANT_OLD_COMPAT_IPC merge compat sys_ipc instances consolidate compat lookup_dcookie() convert vmsplice to COMPAT_SYSCALL_DEFINE switch getrusage() to COMPAT_SYSCALL_DEFINE switch epoll_pwait to COMPAT_SYSCALL_DEFINE convert sendfile{,64} to COMPAT_SYSCALL_DEFINE switch signalfd{,4}() to COMPAT_SYSCALL_DEFINE make SYSCALL_DEFINE<n>-generated wrappers do asmlinkage_protect make HAVE_SYSCALL_WRAPPERS unconditional consolidate cond_syscall and SYSCALL_ALIAS declarations teach SYSCALL_DEFINE<n> how to deal with long long/unsigned long long get rid of duplicate logics in __SC_....[1-6] definitions
2013-04-30dump_stack: unify debug information printed by show_regs()Tejun Heo1-0/+2
show_regs() is inherently arch-dependent but it does make sense to print generic debug information and some archs already do albeit in slightly different forms. This patch introduces a generic function to print debug information from show_regs() so that different archs print out the same information and it's much easier to modify what's printed. show_regs_print_info() prints out the same debug info as dump_stack() does plus task and thread_info pointers. * Archs which didn't print debug info now do. alpha, arc, blackfin, c6x, cris, frv, h8300, hexagon, ia64, m32r, metag, microblaze, mn10300, openrisc, parisc, score, sh64, sparc, um, xtensa * Already prints debug info. Replaced with show_regs_print_info(). The printed information is superset of what used to be there. arm, arm64, avr32, mips, powerpc, sh32, tile, unicore32, x86 * s390 is special in that it used to print arch-specific information along with generic debug info. Heiko and Martin think that the arch-specific extra isn't worth keeping s390 specfic implementation. Converted to use the generic version. Note that now all archs print the debug info before actual register dumps. An example BUG() dump follows. kernel BUG at /work/os/work/kernel/workqueue.c:4841! invalid opcode: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.9.0-rc1-work+ #7 Hardware name: empty empty/S3992, BIOS 080011 10/26/2007 task: ffff88007c85e040 ti: ffff88007c860000 task.ti: ffff88007c860000 RIP: 0010:[<ffffffff8234a07e>] [<ffffffff8234a07e>] init_workqueues+0x4/0x6 RSP: 0000:ffff88007c861ec8 EFLAGS: 00010246 RAX: ffff88007c861fd8 RBX: ffffffff824466a8 RCX: 0000000000000001 RDX: 0000000000000046 RSI: 0000000000000001 RDI: ffffffff8234a07a RBP: ffff88007c861ec8 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000001 R11: 0000000000000000 R12: ffffffff8234a07a R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff88007dc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: ffff88015f7ff000 CR3: 00000000021f1000 CR4: 00000000000007f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Stack: ffff88007c861ef8 ffffffff81000312 ffffffff824466a8 ffff88007c85e650 0000000000000003 0000000000000000 ffff88007c861f38 ffffffff82335e5d ffff88007c862080 ffffffff8223d8c0 ffff88007c862080 ffffffff81c47760 Call Trace: [<ffffffff81000312>] do_one_initcall+0x122/0x170 [<ffffffff82335e5d>] kernel_init_freeable+0x9b/0x1c8 [<ffffffff81c47760>] ? rest_init+0x140/0x140 [<ffffffff81c4776e>] kernel_init+0xe/0xf0 [<ffffffff81c6be9c>] ret_from_fork+0x7c/0xb0 [<ffffffff81c47760>] ? rest_init+0x140/0x140 ... v2: Typo fix in x86-32. v3: CPU number dropped from show_regs_print_info() as dump_stack_print_info() has been updated to print it. s390 specific implementation dropped as requested by s390 maintainers. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: David S. Miller <davem@davemloft.net> Acked-by: Jesper Nilsson <jesper.nilsson@axis.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Fengguang Wu <fengguang.wu@intel.com> Cc: Mike Frysinger <vapier@gentoo.org> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Sam Ravnborg <sam@ravnborg.org> Acked-by: Chris Metcalf <cmetcalf@tilera.com> [tile bits] Acked-by: Richard Kuo <rkuo@codeaurora.org> [hexagon bits] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-30dump_stack: consolidate dump_stack() implementations and unify their behaviorsTejun Heo1-6/+0
Both dump_stack() and show_stack() are currently implemented by each architecture. show_stack(NULL, NULL) dumps the backtrace for the current task as does dump_stack(). On some archs, dump_stack() prints extra information - pid, utsname and so on - in addition to the backtrace while the two are identical on other archs. The usages in arch-independent code of the two functions indicate show_stack(NULL, NULL) should print out bare backtrace while dump_stack() is used for debugging purposes when something went wrong, so it does make sense to print additional information on the task which triggered dump_stack(). There's no reason to require archs to implement two separate but mostly identical functions. It leads to unnecessary subtle information. This patch expands the dummy fallback dump_stack() implementation in lib/dump_stack.c such that it prints out debug information (taken from x86) and invokes show_stack(NULL, NULL) and drops arch-specific dump_stack() implementations in all archs except blackfin. Blackfin's dump_stack() does something wonky that I don't understand. Debug information can be printed separately by calling dump_stack_print_info() so that arch-specific dump_stack() implementation can still emit the same debug information. This is used in blackfin. This patch brings the following behavior changes. * On some archs, an extra level in backtrace for show_stack() could be printed. This is because the top frame was determined in dump_stack() on those archs while generic dump_stack() can't do that reliably. It can be compensated by inlining dump_stack() but not sure whether that'd be necessary. * Most archs didn't use to print debug info on dump_stack(). They do now. An example WARN dump follows. WARNING: at kernel/workqueue.c:4841 init_workqueues+0x35/0x505() Hardware name: empty Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.9.0-rc1-work+ #9 0000000000000009 ffff88007c861e08 ffffffff81c614dc ffff88007c861e48 ffffffff8108f50f ffffffff82228240 0000000000000040 ffffffff8234a03c 0000000000000000 0000000000000000 0000000000000000 ffff88007c861e58 Call Trace: [<ffffffff81c614dc>] dump_stack+0x19/0x1b [<ffffffff8108f50f>] warn_slowpath_common+0x7f/0xc0 [<ffffffff8108f56a>] warn_slowpath_null+0x1a/0x20 [<ffffffff8234a071>] init_workqueues+0x35/0x505 ... v2: CPU number added to the generic debug info as requested by s390 folks and dropped the s390 specific dump_stack(). This loses %ksp from the debug message which the maintainers think isn't important enough to keep the s390-specific dump_stack() implementation. dump_stack_print_info() is moved to kernel/printk.c from lib/dump_stack.c. Because linkage is per objecct file, dump_stack_print_info() living in the same lib file as generic dump_stack() means that archs which implement custom dump_stack() - at this point, only blackfin - can't use dump_stack_print_info() as that will bring in the generic version of dump_stack() too. v1 The v1 patch broke build on blackfin due to this issue. The build breakage was reported by Fengguang Wu. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: David S. Miller <davem@davemloft.net> Acked-by: Vineet Gupta <vgupta@synopsys.com> Acked-by: Jesper Nilsson <jesper.nilsson@axis.com> Acked-by: Vineet Gupta <vgupta@synopsys.com> Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> [s390 bits] Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Mike Frysinger <vapier@gentoo.org> Cc: Fengguang Wu <fengguang.wu@intel.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Sam Ravnborg <sam@ravnborg.org> Acked-by: Richard Kuo <rkuo@codeaurora.org> [hexagon bits] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-30Merge tag 'metag-for-v3.10-rc1' of ↵Linus Torvalds1-3/+0
git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/metag Pull arch/metag update from James Hogan: - Various fixes for the interrupting perf counter handling in metag's perf backend. - Add OProfile support based on perf. - Sets up cache partitions for SMP so bootloader doesn't have to. - Patch from Paul Bolle to remove ARCH_POPULATES_NODE_MAP again (touches microblaze too). - Add TLS pointer regset to metag ptrace api. - Add exported metag DSP extended context handling header <asm/ech.h>. - Increase defconfig log buffer size to 128KiB. - Various fixes, typos, missing exports. * tag 'metag-for-v3.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/metag: metag: defconfigs: increase log buffer 8KiB => 128KiB metag: avoid unnecessary builtin dtb rebuilds metag: add exported <asm/ech.h> for extended context handling metag: export _metag_da_present and cpu_2_hwthread_id metag: ptrace: Implement NT_METAG_TLS memblock: Kill ARCH_POPULATES_NODE_MAP once more metag: cachepart: fix get_global_dcache_size() typo metag: cachepart: take into account small cache bits metag: smp: copy cache partition and enable GCOn metag: OProfile support metag: perf: prepare for use by oprofile metag: perf: don't reset TXTACTCYC metag: perf: use hard_processor_id() to get thread metag: perf: fix frequency sampling (dynamic period) metag: perf: add missing prev_count updates metag: perf: fixes for interrupting perf counters metag: perf: fix wrap handling in delta calculation metag: perf: fix core internal / perf channel mux
2013-04-30Merge branch 'smp-hotplug-for-linus' of ↵Linus Torvalds4-71/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull SMP/hotplug changes from Ingo Molnar: "This is a pretty large, multi-arch series unifying and generalizing the various disjunct pieces of idle routines that architectures have historically copied from each other and have grown in random, wildly inconsistent and sometimes buggy directions: 101 files changed, 455 insertions(+), 1328 deletions(-) this went through a number of review and test iterations before it was committed, it was tested on various architectures, was exposed to linux-next for quite some time - nevertheless it might cause problems on architectures that don't read the mailing lists and don't regularly test linux-next. This cat herding excercise was motivated by the -rt kernel, and was brought to you by Thomas "the Whip" Gleixner." * 'smp-hotplug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (40 commits) idle: Remove GENERIC_IDLE_LOOP config switch um: Use generic idle loop ia64: Make sure interrupts enabled when we "safe_halt()" sparc: Use generic idle loop idle: Remove unused ARCH_HAS_DEFAULT_IDLE bfin: Fix typo in arch_cpu_idle() xtensa: Use generic idle loop x86: Use generic idle loop unicore: Use generic idle loop tile: Use generic idle loop tile: Enter idle with preemption disabled sh: Use generic idle loop score: Use generic idle loop s390: Use generic idle loop powerpc: Use generic idle loop parisc: Use generic idle loop openrisc: Use generic idle loop mn10300: Use generic idle loop mips: Use generic idle loop microblaze: Use generic idle loop ...
2013-04-29early_printk: consolidate random copies of identical codeThomas Gleixner1-22/+4
The early console implementations are the same all over the place. Move the print function to kernel/printk and get rid of the copies. [akpm@linux-foundation.org: arch/mips/kernel/early_printk.c needs kernel.h for va_list] [paul.gortmaker@windriver.com: sh4: make the bios early console support depend on EARLY_PRINTK] Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Russell King <linux@arm.linux.org.uk> Acked-by: Mike Frysinger <vapier@gentoo.org> Cc: Michal Simek <monstr@monstr.eu> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mundt <lethal@linux-sh.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Richard Weinberger <richard@nod.at> Reviewed-by: Ingo Molnar <mingo@kernel.org> Tested-by: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-29mm/microblaze: use free_highmem_page() to free highmem pages into buddy systemJiang Liu1-5/+1
Use helper function free_highmem_page() to free highmem pages into the buddy system. Signed-off-by: Jiang Liu <jiang.liu@huawei.com> Cc: Michal Simek <monstr@monstr.eu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-29mm/microblaze: use common help functions to free reserved pagesJiang Liu2-27/+2
Use common help functions to free reserved pages. Signed-off-by: Jiang Liu <jiang.liu@huawei.com> Cc: Michal Simek <monstr@monstr.eu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-17idle: Remove GENERIC_IDLE_LOOP config switchThomas Gleixner1-1/+0
All archs are converted over. Remove the config switch and the fallback code. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2013-04-16Remove GENERIC_GPIO config optionAlexandre Courbot1-3/+0
GENERIC_GPIO has been made equivalent to GPIOLIB in architecture code and all driver code has been switch to depend on GPIOLIB. It is thus safe to have GENERIC_GPIO removed. Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Grant Likely <grant.likely@secretlab.ca>
2013-04-08microblaze: Use generic idle loopThomas Gleixner3-56/+2
The microblaze idle loop provides a polling and a non polling version, which are suprisingly both polling, just with slightly different instrumentation. Remove them and use the generic poller. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Paul McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Reviewed-by: Cc: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Michal Simek <monstr@monstr.eu> Link: http://lkml.kernel.org/r/20130321215234.687590459@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2013-04-08arch: Consolidate tsk_is_polling()Thomas Gleixner1-1/+0
Move it to a common place. Preparatory patch for implementing set/clear for the idle need_resched poll implementation. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Paul McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Reviewed-by: Cc: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Cc: Magnus Damm <magnus.damm@gmail.com> Link: http://lkml.kernel.org/r/20130321215233.446034505@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2013-04-08arch: Cleanup enable/disable_hltThomas Gleixner2-14/+0
enable/disable_hlt() does not need to be exported and can be killed on architectures which do not use it at all. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Paul McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Reviewed-by: Cc: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Cc: Magnus Damm <magnus.damm@gmail.com> Link: http://lkml.kernel.org/r/20130321215233.377959540@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2013-03-20memblock: Kill ARCH_POPULATES_NODE_MAP once morePaul Bolle1-3/+0
The Kconfig symbol ARCH_POPULATES_NODE_MAP was killed in v3.3. After that it popped up again in microblaze and metag. Nobody noticed, probably because these Kconfig symbols are entirely unused and these architectures both select HAVE_MEMBLOCK_NODE_MAP. Anyhow, these two entries can also be killed. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Acked-by: Michal Simek <monstr@monstr.eu> Signed-off-by: James Hogan <james.hogan@imgtec.com>
2013-03-12Select VIRT_TO_BUS directly where neededStephen Rothwell1-1/+1
In commit 887cbce0adea ("arch Kconfig: centralise ARCH_NO_VIRT_TO_BUS") I introduced the config sybmol HAVE_VIRT_TO_BUS and selected that where needed. I am not sure what I was thinking. Instead, just directly select VIRT_TO_BUS where it is needed. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-03-03consolidate cond_syscall and SYSCALL_ALIAS declarationsAl Viro1-8/+0
take them to asm/linkage.h, with default in linux/linkage.h Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-02-27arch Kconfig: centralise CONFIG_ARCH_NO_VIRT_TO_BUSStephen Rothwell1-0/+1
Change it to CONFIG_HAVE_VIRT_TO_BUS and set it in all architecures that already provide virt_to_bus(). Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Reviewed-by: James Hogan <james.hogan@imgtec.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: H Hartley Sweeten <hartleys@visionengravers.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Vineet Gupta <Vineet.Gupta1@synopsys.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: <linux-arch@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-26Merge branch 'next' of git://git.monstr.eu/linux-2.6-microblazeLinus Torvalds46-327/+295
Pull microblaze update from Michal Simek: "Microblaze changes. After my discussion with Arnd I have also added there asm-generic io patch which is Acked by him and Geert." * 'next' of git://git.monstr.eu/linux-2.6-microblaze: asm-generic: io: Fix ioread16/32be and iowrite16/32be microblaze: Do not use module.h in files which are not modules microblaze: Fix coding style issues microblaze: Add missing return from debugfs_tlb microblaze: Makefile clean microblaze: Add .gitignore entries for auto-generated files microblaze: Fix strncpy_from_user macro
2013-02-25Merge tag 'pm+acpi-fixes-3.9-rc1' of ↵Linus Torvalds1-4/+1
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI and power management fixes from Rafael Wysocki: - Fixes for blackfin and microblaze build problems introduced by the removal of global pm_idle. From Lars-Peter Clausen. - OPP core build fix from Shawn Guo. - Error condition check fix for the new imx6q-cpufreq driver from Wei Yongjun. - Fix for an AER driver crash related to the lack of APEI initialization for acpi=off. From Rafael J Wysocki. - Fix for a USB breakage on Thinkpad T430 related to ACPI power resources and PCI wakeup from Rafael J. Wysocki. * tag 'pm+acpi-fixes-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI / PM: Take unusual configurations of power resources into account imx6q-cpufreq: fix return value check in imx6q_cpufreq_probe() PM / OPP: fix condition for empty of_init_opp_table() ACPI / APEI: Fix crash in apei_hest_parse() for acpi=off microblaze idle: Fix compile error blackfin idle: Fix compile error
2013-02-23Merge branch 'for-linus' of ↵Linus Torvalds5-80/+54
git://git.kernel.org/pub/scm/linux/kernel/git/viro/signal Pull signal handling cleanups from Al Viro: "This is the first pile; another one will come a bit later and will contain SYSCALL_DEFINE-related patches. - a bunch of signal-related syscalls (both native and compat) unified. - a bunch of compat syscalls switched to COMPAT_SYSCALL_DEFINE (fixing several potential problems with missing argument validation, while we are at it) - a lot of now-pointless wrappers killed - a couple of architectures (cris and hexagon) forgot to save altstack settings into sigframe, even though they used the (uninitialized) values in sigreturn; fixed. - microblaze fixes for delivery of multiple signals arriving at once - saner set of helpers for signal delivery introduced, several architectures switched to using those." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/signal: (143 commits) x86: convert to ksignal sparc: convert to ksignal arm: switch to struct ksignal * passing alpha: pass k_sigaction and siginfo_t using ksignal pointer burying unused conditionals make do_sigaltstack() static arm64: switch to generic old sigaction() (compat-only) arm64: switch to generic compat rt_sigaction() arm64: switch compat to generic old sigsuspend arm64: switch to generic compat rt_sigqueueinfo() arm64: switch to generic compat rt_sigpending() arm64: switch to generic compat rt_sigprocmask() arm64: switch to generic sigaltstack sparc: switch to generic old sigsuspend sparc: COMPAT_SYSCALL_DEFINE does all sign-extension as well as SYSCALL_DEFINE sparc: kill sign-extending wrappers for native syscalls kill sparc32_open() sparc: switch to use of generic old sigaction sparc: switch sys_compat_rt_sigaction() to COMPAT_SYSCALL_DEFINE mips: switch to generic sys_fork() and sys_clone() ...
2013-02-23microblaze idle: Fix compile errorLars-Peter Clausen1-4/+1
Commit def8203 ("microblaze idle: delete pm_idle") introduced the following compile error: arch/microblaze/kernel/process.c: In function 'cpu_idle': arch/microblaze/kernel/process.c:100: error: 'idle' undeclared (first use in this function) arch/microblaze/kernel/process.c:100: error: (Each undeclared identifier is reported only once arch/microblaze/kernel/process.c:100: error: for each function it appears in.) arch/microblaze/kernel/process.c:106: error: implicit declaration of function 'idle' This patch fixes it. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Len Brown <len.brown@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-02-21Merge tag 'driver-core-3.9-rc1' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core patches from Greg Kroah-Hartman: "Here is the big driver core merge for 3.9-rc1 There are two major series here, both of which touch lots of drivers all over the kernel, and will cause you some merge conflicts: - add a new function called devm_ioremap_resource() to properly be able to check return values. - remove CONFIG_EXPERIMENTAL Other than those patches, there's not much here, some minor fixes and updates" Fix up trivial conflicts * tag 'driver-core-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (221 commits) base: memory: fix soft/hard_offline_page permissions drivercore: Fix ordering between deferred_probe and exiting initcalls backlight: fix class_find_device() arguments TTY: mark tty_get_device call with the proper const values driver-core: constify data for class_find_device() firmware: Ignore abort check when no user-helper is used firmware: Reduce ifdef CONFIG_FW_LOADER_USER_HELPER firmware: Make user-mode helper optional firmware: Refactoring for splitting user-mode helper code Driver core: treat unregistered bus_types as having no devices watchdog: Convert to devm_ioremap_resource() thermal: Convert to devm_ioremap_resource() spi: Convert to devm_ioremap_resource() power: Convert to devm_ioremap_resource() mtd: Convert to devm_ioremap_resource() mmc: Convert to devm_ioremap_resource() mfd: Convert to devm_ioremap_resource() media: Convert to devm_ioremap_resource() iommu: Convert to devm_ioremap_resource() drm: Convert to devm_ioremap_resource() ...
2013-02-17microblaze idle: delete pm_idleLen Brown1-3/+0
pm_idle on microblaze served no purpose. Signed-off-by: Len Brown <len.brown@intel.com> Cc: microblaze-uclinux@itee.uq.edu.au
2013-02-14burying unused conditionalsAl Viro2-3/+0
__ARCH_WANT_SYS_RT_SIGACTION, __ARCH_WANT_SYS_RT_SIGSUSPEND, __ARCH_WANT_COMPAT_SYS_RT_SIGSUSPEND, __ARCH_WANT_COMPAT_SYS_SCHED_RR_GET_INTERVAL - not used anymore CONFIG_GENERIC_{SIGALTSTACK,COMPAT_RT_SIG{ACTION,QUEUEINFO,PENDING,PROCMASK}} - can be assumed always set.
2013-02-12microblaze: Do not use module.h in files which are not modulesMichal Simek23-22/+23
Based on the patch: "lib: reduce the use of module.h wherever possible" (sha1: 8bc3bcc93a2b4e47d5d410146f6546bca6171663) fix all microblaze files which are not modules. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2013-02-12microblaze: Fix coding style issuesMichal Simek32-294/+259
Fix coding style issues reported by checkpatch.pl. Signed-off-by: Michal Simek <monstr@monstr.eu>
2013-02-12microblaze: Add missing return from debugfs_tlbMichal Simek1-0/+2
Function must return any value. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2013-02-12microblaze: Makefile cleanJason Wu1-6/+3
Remove unnecessary variables Signed-off-by: Jason Wu <huanyu@xilinx.com> Acked-by: Michal Simek <michal.simek@xilinx.com>
2013-02-12microblaze: Add .gitignore entries for auto-generated filesLars-Peter Clausen2-0/+4
Add .gitignore entries for files which are generated during the build process. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2013-02-12microblaze: Fix strncpy_from_user macroMichal Simek1-5/+4
Problem happens when len in strncpy_from_user is setup and passing string has len-1 chars + \0 terminated character. In this case was returned incorrect length of the string. It should always retunrs the length of the string (not including the trailing NULL). Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2013-02-03microblaze: remove debris in ptrace.cAl Viro1-23/+0
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-02-03microblaze: Move restart allowed out of blockMichal Simek1-1/+1
Better not to break block which do work together. Signed-off-by: Michal Simek <monstr@monstr.eu> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-02-03microblaze: fix handling of multiple pending signalsAl Viro2-29/+42
We need to keep building sigframes until no pending signals remain. Wrap do_notify_resume() calls into loops; do _not_ allow syscall restart logics to trigger after the first iteration. Incidentally, comments about pending signals that should (somehow) be in r18 are pure BS. Doesn't work that way and cannot work that way, sorry... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-02-03microblaze: fix the horror with restarts of sigreturn()Al Viro2-2/+7
solution a-la arm one - pick a callee-saved register (r30), set it non-zero when entering a syscall, have sigreturn wrapper zero it out and pass the value in it to do_notify_resume() as "in_syscall" (actually, "restarts allowed") argument. Note that we don't give a damn about ret_from_fork() - return value is not restart-worthy anyway. Possible remaining bug: on !MMU we still have _debug_exception() restartable. If it hits with -ERESTART_... accidentally in r3, fun happens. MMU does _not_ have _debug_exception() restartable. If that's decided to be a bug (as I strongly suspect it to be), we'll just need to replace setting r30 to 1 with setting r30 to 0 in !MMU _debug_exception(). Up to microblaze maintainers... [folded a fix from Michal] Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>