summaryrefslogtreecommitdiffstats
path: root/arch/m68k
AgeCommit message (Collapse)AuthorFilesLines
2012-08-03Merge branch 'for-linus' of ↵Linus Torvalds54-817/+92
git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k Pull m68k updates from Geert Uytterhoeven. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k: m68k: Make sys_atomic_cmpxchg_32 work on classic m68k m68k/apollo: Rename "timer" to "apollo_timer" zorro: Remove unused zorro_bus.devices m68k: Remove never used asm/shm.h m68k/sun3: Remove unselectable code in prom_init() m68k: Use asm-generic version of <asm/sections.h> m68k: Replace m68k-specific _[se]bss by generic __bss_{start,stop} mtd/uclinux: Use generic __bss_stop instead of _ebss m68knommu: Allow ColdFire CPUs to use unaligned accesses m68k: Remove five unused headers m68k: CPU32 does not support unaligned accesses m68k: Introduce config option CPU_HAS_NO_UNALIGNED m68k: delay, muldi3 - Use CONFIG_CPU_HAS_NO_MULDIV64 m68k: Move CPU_HAS_* config options m68k: Remove duplicate FPU config option m68knommu: Clean up printing of sections m68k: Use asm-generic version of <asm/types.h> m68k: Use Kbuild logic to import asm-generic headers
2012-08-03m68k: Make sys_atomic_cmpxchg_32 work on classic m68kAndreas Schwab1-2/+6
User space access must always go through uaccess accessors, since on classic m68k user space and kernel space are completely separate. Signed-off-by: Andreas Schwab <schwab@linux-m68k.org> Tested-by: Thorsten Glaser <tg@debian.org> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: stable@vger.kernel.org
2012-07-30ipc: use Kconfig options for __ARCH_WANT_[COMPAT_]IPC_PARSE_VERSIONWill Deacon2-1/+1
Rather than #define the options manually in the architecture code, add Kconfig options for them and select them there instead. This also allows us to select the compat IPC version parsing automatically for platforms using the old compat IPC interface. Reported-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Will Deacon <will.deacon@arm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-07-24Merge branch 'for-next' of ↵Linus Torvalds56-1125/+2984
git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu Pull m68knommu arch update from Greg Ungerer: "Quite a varied set of changes this time. - A little more merge cleanup, this time the assembler entry code. - New sub-architecture support for the ColdFire 5251/5253 and 5441x CPU families. - Specific clk support code for the ColdFire 520x and 532x CPU familes. - Refactoring of the ColdFire GPIO support. - PCI bus support for some ColdFire CPUS that have PCI hardware (54xx family). This showed up a few problems with ColdFire cache, allocating coherent memory and bi-directional DMA support. Fixes for those too." * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu: (21 commits) m68k: allow PCI bus to be enabled for ColdFire m54xx CPUs m68k: add PCI bus code support for the ColdFire M54xx SoC family m68k: add IO access definitions to support PCI on ColdFire platforms m68k: add PCI bus support definitions for the ColdFire M54xx SoC family m68k: common PCI support definitions and code m68k: add support for DMA_BIDIRECTIONAL in dma support functions m68k: fix ColdFire clear cache operation m68k: use simpler dma_alloc_coherent() for ColdFire CPUs m68knommu: platform support for 8390 based ethernet used on some boards m68knommu: Add clk definitions for m532x. m68knommu: Add clk definitions for m520x. m68knommu: Add rtc device for m5441x. m68knommu: add definitions for the third interrupt controller on devices that don't have a third interrupt controller. m68knommu: Add support for the Coldfire m5441x. m68knommu: use MCF_IRQ_PIT1 instead of MCFINT_VECBASE + MCFINT_PIT1 coldfire-qspi: Add support for the Coldfire 5251/5253. m68knommu: Add support for the Coldfire 5251/5253 m68knommu: refactor Coldfire GPIO not to require GPIOLIB, eliminate mcf_gpio_chips. m68k: merge the MMU and non-MMU versions of the entry.S code m68k: use jbsr to call functions instead of bsrl ...
2012-07-24Merge branch 'for-linus' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial Pull trivial tree from Jiri Kosina: "Trivial updates all over the place as usual." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (29 commits) Fix typo in include/linux/clk.h . pci: hotplug: Fix typo in pci iommu: Fix typo in iommu video: Fix typo in drivers/video Documentation: Add newline at end-of-file to files lacking one arm,unicore32: Remove obsolete "select MISC_DEVICES" module.c: spelling s/postition/position/g cpufreq: Fix typo in cpufreq driver trivial: typo in comment in mksysmap mach-omap2: Fix typo in debug message and comment scsi: aha152x: Fix sparse warning and make printing pointer address more portable. Change email address for Steve Glendinning Btrfs: fix typo in convert_extent_bit via: Remove bogus if check netprio_cgroup.c: fix comment typo backlight: fix memory leak on obscure error path Documentation: asus-laptop.txt references an obsolete Kconfig item Documentation: ManagementStyle: fixed typo mm/vmscan: cleanup comment error in balance_pgdat mm: cleanup on the comments of zone_reclaim_stat ...
2012-07-22m68k/apollo: Rename "timer" to "apollo_timer"Geert Uytterhoeven2-9/+9
In file included from include/linux/kgdb.h:17, from include/linux/fb.h:8, from drivers/video/dnfb.c:15: include/linux/serial_8250.h:71: error: expected identifier or ‘(’ before numeric constant include/linux/serial_8250.h:72: error: expected ‘;’ before ‘struct’ make[1]: *** [drivers/video/dnfb.o] Error 1 This is caused by #define timer (IO_BASE + timer_physaddr) in <asm/apollohw.h>, which conflicts with the new "timer" struct member in <linux/serial_8250.h>. Rename "timer" to "apollo_timer", as it's a way too generic name for a global #define. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> -- http://kisskb.ellerman.id.au/kisskb/buildresult/6739606/
2012-07-20module.c: spelling s/postition/position/gGeert Uytterhoeven1-2/+2
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-07-17m68k: allow PCI bus to be enabled for ColdFire m54xx CPUsGreg Ungerer1-0/+7
All support code for the PCI bus hardware on the ColdFire 547x and 548x CPUs is now in. Allow enabling of CONFIG_PCI for them. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-07-17m68k: add PCI bus code support for the ColdFire M54xx SoC familyGreg Ungerer2-0/+329
The ColdFire M54xx SoC family have a traditional PCI bus interface. Add the core support code to access and use this bus on these parts. This code provides all the config space access functions and IO access functions. It also carries out the PCI bus initialization and hooks into the kernel PCI subsystem. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-07-17m68k: add IO access definitions to support PCI on ColdFire platformsGreg Ungerer1-1/+47
Define the usual memory access functions (readb/writeb/...) and I/O space functions (inb/outb/...) for PCI bus support on ColdFire CPU based platforms. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
2012-07-17m68k: add PCI bus support definitions for the ColdFire M54xx SoC familyGreg Ungerer2-0/+141
Add all the required definitoins to support the ColdFire M54xx SoC PCI hardware unit. These are strait out of the MCF5475 Reference Manual. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-07-17m68k: common PCI support definitions and codeGreg Ungerer5-0/+122
Basic set of definitions and support code required to turn on CONFIG_PCI for the m68k architecture. Nothing specific to any PCI implementation in any m68k class CPU hardware yet. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
2012-07-17m68k: add support for DMA_BIDIRECTIONAL in dma support functionsGreg Ungerer1-0/+1
The dma cache support functions do not currently support the direction flag DMA_BIDIRECTIONAL. If a driver passes this direction to dma_map_single or friends you will get console output like this: dma_sync_single_for_device: unsupported dir 0 For example when using the Intel e100 ethernet driver on a ColdFire platform with PCI bus. You will get a stream of these messages coming out. Modify the dma cache support code adding support for DMA_BIDIRECTIONAL. It is actioned by doing a cache push operation. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-07-17m68k: fix ColdFire clear cache operationGreg Ungerer2-1/+42
The code for clearing (invalidating) the ColdFire cache is actually performing a push operation. Add functions to clear the cache, and fix cache_clear() to call the appropriate clear cache function. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-07-16m68k: use simpler dma_alloc_coherent() for ColdFire CPUsGreg Ungerer1-2/+2
On all ColdFire platforms (whether MMU enabled or not) we want to use the simple page based dma_alloc_coherent. We don't want the virtual mapping version that is used on classic m68k setups. So modify the conditionals to use the existing simpler dma_alloc_coherent on all ColdFire and non-MMU builds. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-07-16m68knommu: platform support for 8390 based ethernet used on some boardsGreg Ungerer2-0/+39
Quite a few of Freescale's older ColdFire development boards used an NS8390 based ethernet interface. Add a platform definition for the resources used by these devices so we can use it on these boards. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-07-16m68knommu: Add clk definitions for m532x.Steven King2-1/+152
The 532x has individually controllable clocks for it peripherals. Add clk definitions for these and add default initialization of either enabled or disabled. Signed-off-by: Steven King <sfking@fdwdc.com> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-07-16m68knommu: Add clk definitions for m520x.Steven King2-0/+107
The 520x has individually controllable clocks for its peripherals. Add clk definitions for these and add default initialization of either enabled or disabled for all of the clocks. Signed-off-by: Steven King <sfking@fdwdc.com> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-07-16m68knommu: Add rtc device for m5441x.Steven King3-7/+49
Add definitions for the m5441x rtc device and an init_BSP function to the m5441x device code. Signed-off-by: Steven King <sfking@fdwdc.com>
2012-07-16m68knommu: add definitions for the third interrupt controller on devices ↵Steven King2-0/+6
that don't have a third interrupt controller. Extending the interrupt controller code in intc-simr.c to support the third interrupt controller on the m5441x means we need to add defines (as 0) for the third interrupt controller on devices that don't have a third interrupt controller. Signed-off-by: Steven King <sfking@fdwdc.com> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-07-16m68knommu: Add support for the Coldfire m5441x.Steven King15-24/+761
Add support for the Coldfire 5441x (54410/54415/54416/54417/54418). Currently we only support noMMU mode. It requires the PIT patch posted previously as it uses the PIT instead of the dma timer as a clock source so we can get all that GENERIC_CLOCKEVENTS goodness. It also adds some simple clk definitions and very simple minded power management. The gpio code is tweeked and some additional devices are added to devices.c. The Makefile uses -mv4e as apparently, the only difference a v4m (m5441x) and a v4e is the later has a FPU, which I don't think should matter to us in the kernel. Signed-off-by: Steven King <sfking@fdwdc.com> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-07-16m68knommu: use MCF_IRQ_PIT1 instead of MCFINT_VECBASE + MCFINT_PIT1Steven King5-3/+6
use MCF_IRQ_PIT1 instead of MCFINT_VECBASE + MCFINT_PIT1 so we can support those parts that have the pit1 interrupt on other than the first interrupt controller. Signed-off-by: Steven King <sfking@fdwdc.com> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-07-16m68knommu: Add support for the Coldfire 5251/5253Steven King11-10/+376
Basic support for the Coldfire 5251/5253. Signed-off-by: Steven king <sfking@fdwdc.com> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-07-16m68knommu: refactor Coldfire GPIO not to require GPIOLIB, eliminate ↵Steven King18-551/+375
mcf_gpio_chips. If we're not connecting external GPIO extenders via i2c or spi or whatever, we probably don't need GPIOLIB. If we provide an alternate implementation of the GPIOLIB functions to use when only on-chip GPIO is needed, we can change ARCH_REQUIRE_GPIOLIB to ARCH_WANTS_OPTIONAL_GPIOLIB so that GPIOLIB becomes optional. The downside is that in the GPIOLIB=n case, we lose all error checking done by gpiolib, ie multiply allocating the gpio, free'ing gpio etc., so that the only checking that can be done is if we reference a gpio on an external part. Targets that need the extra error checking can still select GPIOLIB=y. For the case where GPIOLIB=y, we can simplify the table of gpio chips to use a single chip, eliminating the tables of chips in the 5xxx.c files. The original motivation for the definition of multiple chips was to match the way many of the Coldfire variants defined their gpio as a spare array in memory. However, all this really gains us is some error checking when we request a gpio, gpiolib can check that it doesn't fall in one of the holes. If thats important, I think we can still come up with a better way of accomplishing that. Also in this patch is some general cleanup and reorganizing of the gpio header files (I'm sure I must have had a reason why I sometimes used a prefix of mcf_gpio and other times mcfgpio but for the life of me I can't think of it now). Signed-off-by: Steven King <sfking@fdwdc.com> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-07-16m68k: merge the MMU and non-MMU versions of the entry.S codeGreg Ungerer3-552/+449
Some of the entry.S code is common to both MMU and non-MMU builds. So merge the entry_no.S and entry_mm.S files back into a single file. With a little code movement we only need a single #ifdef. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
2012-07-16m68k: use jbsr to call functions instead of bsrlGreg Ungerer1-2/+2
There is a few places that the m68k entry code uses the bsrl instruction to call other functions. That instruction is only supported on 68020 and higher CPU types. If we use jbsr instead the code will be clean for all 68k and ColdFire CPU types. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
2012-07-16m68k: use some direct calls to ret_from_exception in entry codeGreg Ungerer1-3/+3
The ret_from_excption code is referenced by its function name, or by a label set at the start of its code. The non-MMU code can share some of this code if we make direct calls to ret_from_exception instead of the associated label. The effected function paths are: buserr, trap and ret_from_fork. So change these to branch directly to ret_from_exception. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
2012-07-12net: add support for NS8390 based eth controllers on some ColdFire CPU boardsGreg Ungerer1-120/+9
A number of older ColdFire CPU based boards use NS8390 based network controllers. Most use the Davicom 9008F or the UMC 9008F. This driver provides the support code to get these devices working on these platforms. Generally the NS8390 based eth device is direct connected via the general purpose bus of the ColdFire CPU. So its addressing and interrupt setup is fixed on each of the different platforms (classic platform setup). This driver is based on the other drivers/net/ethernet/8390 drivers, and includes the lib8390.c code. It uses the existing definitions of the board NS8390 device addresses, interrupts and access types from the arch/m68k/include/asm/mcf8390.h, but moves the IO access functions into the driver code and out of that header. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-12m68knommu: move the badly named mcfne.h to a better mcf8390.hGreg Ungerer1-4/+4
The mcfne.h include contains definitions to support NS8390 eth based hardware on ColdFire based CPU boards. So change its name to reflect that better. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-27m68k: Remove never used asm/shm.hPaul Bolle1-31/+0
m68k's asm/shm.h header has been part of the tree ever since m68k support got added in v1.3.94. (It started as /include/asm-m68k/shm.h and moved to its current location a few years ago.) It seems it was never used: no file ever included it and nothing used the macros it defines. (Actually, from v2.5.46 until v2.6.29-rc3 it was included by m68knommu's asm/shm.h. But that header was just a very thin wrapper for this header and was itself unused too.) This header can safely be removed. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2012-06-27m68k/sun3: Remove unselectable code in prom_init()Geert Uytterhoeven1-46/+2
This was copied from SPARC, but isn't relevant for the supported Sun-3 models. [Geert] Also remove the related extern declarations, and update the comment about prom_init(). Reported-by: Sarah Nadi <snadi@uwaterloo.ca> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2012-06-27m68k: Use asm-generic version of <asm/sections.h>Geert Uytterhoeven2-6/+1
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Greg Ungerer<gerg@uclinux.org>
2012-06-27m68k: Replace m68k-specific _[se]bss by generic __bss_{start,stop}Geert Uytterhoeven14-38/+30
BSS_SECTION() provides the __bss_{start,stop} symbols, so there's no need to wrap our own _[se]bss around it. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Greg Ungerer<gerg@uclinux.org>
2012-06-27m68knommu: Allow ColdFire CPUs to use unaligned accessesGreg Ungerer1-1/+0
All of the current Linux supported ColdFire CPUs handle unaligned memory accesses. So remove the CONFIG_CPU_HAS_NO_UNALIGNED option selection for ColdFire. If we ever support a specific ColdFire CPU that does not support unaligned accesses then we can insert the CONFIG_CPU_HAS_NO_UNALIGNED for that specific CPU type. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2012-06-27m68k: Remove five unused headersPaul Bolle5-545/+0
There are five entirely unused headers in arch/m68k/include/asm. Nothing includes these headers. And a few tests found no hits for the things they provide (which makes sense). MC68332.h, mac_mouse.h, and mcfmbus.h are all unused since at least v2.6.12-rc2 (I didn't bother looking further back than that). apollodma.h is unused since v2.6.19: commit 2ed0ce5b57950a620155433c62a5a02a067f1376 ("m68k/Apollo: Remove obsolete arch/m68k/apollo/dma.c") removed the last file interested in that header. And everything interested in <asm/sbus.h> was removed in the v2.6.28 release cycle. The last occurrence of "sbus.h" was deleted with commit 0c0db98b50ed1217c0dbf4051722034ba314d06e ("sparc: Remove Documentation/sparc/sbus_drivers.txt"). I'm not sure whether anything relevant for m68k was included in v2.6.27, but it doesn't really matter. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Acked-by: Greg Ungerer<gerg@uclinux.org> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2012-06-25m68knommu: define a local devm_clk_get() functionGreg Ungerer1-0/+7
Commit f4d40de39a23f0c39cca55ac63e1175c69c3d2f7 ("net fec: do not depend on grouped clocks") breaks compilation of the FEC driver for non iMX platforms in linux-3.5-rc1. For example when compiling for ColdFire I get: LD vmlinux drivers/built-in.o: In function `fec_probe': fec.c:(.devinit.text+0x1e0): undefined reference to `devm_clk_get' Define a simple devm_clk_get() function for the m68knommu architecture. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-06-13Merge branch 'for-linus' of ↵Linus Torvalds4-78/+11
git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k Pull m68k update from Geert Uytterhoeven. This makes m68k use the generic library functions for the user-space strn[cpy|len] functions. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k: m68k: Use generic strncpy_from_user(), strlen_user(), and strnlen_user()
2012-06-12m68k: make syscall_trace_enter/leave exist for non-MMU classic m68k typesGreg Ungerer1-1/+1
The assembler entry code calls directly to the syscall_trace_enter() and syscall_trace_leave() functions. But currently they are conditionaly compiled out for the non-MMU classic m68k CPU types (so 68328 for example), resulting in a link error: LD vmlinux arch/m68k/platform/68328/built-in.o: In function `do_trace': (.text+0x1c): undefined reference to `syscall_trace_enter' arch/m68k/platform/68328/built-in.o: In function `do_trace': (.text+0x4c): undefined reference to `syscall_trace_leave' Change the conditional check that includes these functions to be true for the !defined(CONFIG_MMU) case as well. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
2012-06-12m68knommu: fix 68360 local setting of timer interrupt handlerGreg Ungerer1-2/+5
Compiling for 68360 based targets fails with: arch/m68k/platform/68360/config.c: In function ‘hw_tick’: arch/m68k/platform/68360/config.c:55:2: error: implicit declaration of function ‘arch_timer_interrupt’ arch/m68k/platform/68360/config.c: At top level: arch/m68k/platform/68360/config.c:64:6: error: conflicting types for ‘hw_timer_init’ arch/m68k/include/asm/machdep.h:36:13: note: previous declaration of ‘hw_timer_init’ was here Changes made to hw_timer_init() didn't get updated in the 68328 timer code. So process and call the "handler" arg that is now passed into that hw_timer_init() function. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-06-12m68knommu: fix 68328 local setting of timer interrupt handlerGreg Ungerer1-2/+4
Compiling for 68328 based targets fails with: arch/m68k/platform/68328/timers.c: In function ‘hw_tick’: arch/m68k/platform/68328/timers.c:65:2: error: implicit declaration of function ‘arch_timer_interrupt’ arch/m68k/platform/68328/timers.c: At top level: arch/m68k/platform/68328/timers.c:102:6: error: conflicting types for ‘hw_timer_init’ arch/m68k/include/asm/machdep.h:36:13: note: previous declaration of ‘hw_timer_init’ was here Changes made to hw_timer_init() didn't get updated in the 68328 timer code. So process and call the "handler" arg that is now passed into that hw_timer_init() function. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-06-12m68k: fix inclusion of arch_gettimeoffset for non-MMU 68k classic CPU typesGreg Ungerer1-2/+2
When building for non-MMU based classic 68k CPU types (like the 68328 for example) you get a compilation error: CC arch/m68k/kernel/time.o arch/m68k/kernel/time.c:91:5: error: redefinition of ‘arch_gettimeoffset’ include/linux/time.h:145:19: note: previous definition of ‘arch_gettimeoffset’ was here The arch_gettimeoffset() code is included when building for these CPU types, but it shouldn't be. Those machine types do not have CONFIG_ARCH_USES_GETTIMEOFFSET set. The fix is simply to conditionally include the arch_gettimeoffset() code on that same config setting that specifies its use or not. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
2012-06-12m68knommu: m528x qspi definition fixSteven King1-1/+1
The consolidation of the qspi code missed a definition for 528x. Signed-off-by: Steven King <sfking@fdwdc.com> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-06-10m68k: CPU32 does not support unaligned accessesGeert Uytterhoeven1-0/+1
Hence select CPU_HAS_NO_UNALIGNED Reported-by: Philippe De Muyter <phdm@macqel.be> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Greg Ungerer<gerg@uclinux.org>
2012-06-10m68k: Introduce config option CPU_HAS_NO_UNALIGNEDGeert Uytterhoeven2-2/+7
Use CONFIG_CPU_HAS_NO_UNALIGNED instead of open coding CONFIG_M68000 || CONFIG_COLDFIRE Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Greg Ungerer<gerg@uclinux.org>
2012-06-10m68k: delay, muldi3 - Use CONFIG_CPU_HAS_NO_MULDIV64Geert Uytterhoeven2-2/+2
instead of open coding CONFIG_M68000 || CONFIG_COLDFIRE Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Greg Ungerer<gerg@uclinux.org>
2012-06-10m68k: Move CPU_HAS_* config optionsGeert Uytterhoeven2-9/+9
They belong together with the CPU selection Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Greg Ungerer<gerg@uclinux.org>
2012-06-10m68k: Remove duplicate FPU config optionGeert Uytterhoeven1-3/+0
It's also defined in arch/m68k/Kconfig.cpu Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Greg Ungerer<gerg@uclinux.org>
2012-06-10m68knommu: Clean up printing of sectionsGeert Uytterhoeven1-7/+4
- Remove casts and unneeded address-of ('&') operators, - Use %p to format pointers, %lx to format unsigned longs. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Greg Ungerer <gerg@uclinux.org>
2012-06-10m68k: Use asm-generic version of <asm/types.h>Geert Uytterhoeven2-22/+1
The extra definition for BITS_PER_LONG we had is also indirectly provided by <asm-generic/types.h>, via <asm-generic/int-ll64.h> and <asm/bitsperlong.h> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2012-06-10m68k: Use Kbuild logic to import asm-generic headersGeert Uytterhoeven24-97/+23
Replace all headers files that just include their asm-generic version by Kbuild logic Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-24 17:39:39 +0000