summaryrefslogtreecommitdiffstats
path: root/arch/m68k
AgeCommit message (Collapse)AuthorFilesLines
2019-02-25m68k: add ColdFire mcf5441x eDMA platform supportAngelo Dureghello3-2/+98
This patch adds support for ColdFire eDMA platform driver. Signed-off-by: Angelo Dureghello <angelo@sysam.it> Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
2019-02-1932-bit userspace ABI: introduce ARCH_32BIT_OFF_T config optionYury Norov1-0/+1
All new 32-bit architectures should have 64-bit userspace off_t type, but existing architectures has 32-bit ones. To enforce the rule, new config option is added to arch/Kconfig that defaults ARCH_32BIT_OFF_T to be disabled for new 32-bit architectures. All existing 32-bit architectures enable it explicitly. New option affects force_o_largefile() behaviour. Namely, if userspace off_t is 64-bits long, we have no reason to reject user to open big files. Note that even if architectures has only 64-bit off_t in the kernel (arc, c6x, h8300, hexagon, nios2, openrisc, and unicore32), a libc may use 32-bit off_t, and therefore want to limit the file size to 4GB unless specified differently in the open flags. Signed-off-by: Yury Norov <ynorov@caviumnetworks.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Yury Norov <ynorov@marvell.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-02-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-3/+7
The netfilter conflicts were rather simple overlapping changes. However, the cls_tcindex.c stuff was a bit more complex. On the 'net' side, Cong is fixing several races and memory leaks. Whilst on the 'net-next' side we have Vlad adding the rtnl-ness support. What I've decided to do, in order to resolve this, is revert the conversion over to using a workqueue that Cong did, bringing us back to pure RCU. I did it this way because I believe that either Cong's races don't apply with have Vlad did things, or Cong will have to implement the race fix slightly differently. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-11Merge 5.0-rc6 into char-misc-nextGreg Kroah-Hartman3-4/+8
We need the char-misc fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-10Merge tag 'y2038-new-syscalls' of ↵Thomas Gleixner2-28/+48
git://git.kernel.org:/pub/scm/linux/kernel/git/arnd/playground into timers/2038 Pull y2038 - time64 system calls from Arnd Bergmann: This series finally gets us to the point of having system calls with 64-bit time_t on all architectures, after a long time of incremental preparation patches. There was actually one conversion that I missed during the summer, i.e. Deepa's timex series, which I now updated based the 5.0-rc1 changes and review comments. The following system calls are now added on all 32-bit architectures using the same system call numbers: 403 clock_gettime64 404 clock_settime64 405 clock_adjtime64 406 clock_getres_time64 407 clock_nanosleep_time64 408 timer_gettime64 409 timer_settime64 410 timerfd_gettime64 411 timerfd_settime64 412 utimensat_time64 413 pselect6_time64 414 ppoll_time64 416 io_pgetevents_time64 417 recvmmsg_time64 418 mq_timedsend_time64 419 mq_timedreceiv_time64 420 semtimedop_time64 421 rt_sigtimedwait_time64 422 futex_time64 423 sched_rr_get_interval_time64 Each one of these corresponds directly to an existing system call that includes a 'struct timespec' argument, or a structure containing a timespec or (in case of clock_adjtime) timeval. Not included here are new versions of getitimer/setitimer and getrusage/waitid, which are planned for the future but only needed to make a consistent API rather than for correct operation beyond y2038. These four system calls are based on 'timeval', and it has not been finally decided what the replacement kernel interface will use instead. So far, I have done a lot of build testing across most architectures, which has found a number of bugs. Runtime testing so far included testing LTP on 32-bit ARM with the existing system calls, to ensure we do not regress for existing binaries, and a test with a 32-bit x86 build of LTP against a modified version of the musl C library that has been adapted to the new system call interface [3]. This library can be used for testing on all architectures supported by musl-1.1.21, but it is not how the support is getting integrated into the official musl release. Official musl support is planned but will require more invasive changes to the library. Link: https://lore.kernel.org/lkml/20190110162435.309262-1-arnd@arndb.de/T/ Link: https://lore.kernel.org/lkml/20190118161835.2259170-1-arnd@arndb.de/ Link: https://git.linaro.org/people/arnd/musl-y2038.git/ [2]
2019-02-10Merge tag 'y2038-syscall-cleanup' of ↵Thomas Gleixner1-0/+16
git://git.kernel.org:/pub/scm/linux/kernel/git/arnd/playground into timers/2038 Pull preparatory work for y2038 changes from Arnd Bergmann: System call unification and cleanup The system call tables have diverged a bit over the years, and a number of the recent additions never made it into all architectures, for one reason or another. This is an attempt to clean it up as far as we can without breaking compatibility, doing a number of steps: - Add system calls that have not yet been integrated into all architectures but that we definitely want there. This includes {,f}statfs64() and get{eg,eu,g,p,u,pp}id() on alpha, which have been missing traditionally. - The s390 compat syscall handling is cleaned up to be more like what we do on other architectures, while keeping the 31-bit pointer extension. This was merged as a shared branch by the s390 maintainers and is included here in order to base the other patches on top. - Add the separate ipc syscalls on all architectures that traditionally only had sys_ipc(). This version is done without support for IPC_OLD that is we have in sys_ipc. The new semtimedop_time64 syscall will only be added here, not in sys_ipc - Add syscall numbers for a couple of syscalls that we probably don't need everywhere, in particular pkey_* and rseq, for the purpose of symmetry: if it's in asm-generic/unistd.h, it makes sense to have it everywhere. I expect that any future system calls will get assigned on all platforms together, even when they appear to be specific to a single architecture. - Prepare for having the same system call numbers for any future calls. In combination with the generated tables, this hopefully makes it easier to add new calls across all architectures together. All of the above are technically separate from the y2038 work, but are done as preparation before we add the new 64-bit time_t system calls everywhere, providing a common baseline set of system calls. I expect that glibc and other libraries that want to use 64-bit time_t will require linux-5.1 kernel headers for building in the future, and at a much later point may also require linux-5.1 or a later version as the minimum kernel at runtime. Having a common baseline then allows the removal of many architecture or kernel version specific workarounds.
2019-02-09Merge tag 'for-linus-20190209' of git://git.kernel.dk/linux-blockLinus Torvalds1-3/+7
Pull block fixes from Jens Axboe: - NVMe pull request from Christoph, fixing namespace locking when dealing with the effects log, and a rapid add/remove issue (Keith) - blktrace tweak, ensuring requests with -1 sectors are shown (Jan) - link power management quirk for a Smasung SSD (Hans) - m68k nfblock dynamic major number fix (Chengguang) - series fixing blk-iolatency inflight counter issue (Liu) - ensure that we clear ->private when setting up the aio kiocb (Mike) - __find_get_block_slow() rate limit print (Tetsuo) * tag 'for-linus-20190209' of git://git.kernel.dk/linux-block: blk-mq: remove duplicated definition of blk_mq_freeze_queue Blk-iolatency: warn on negative inflight IO counter blk-iolatency: fix IO hang due to negative inflight counter blktrace: Show requests without sector fs: ratelimit __find_get_block_slow() failure message. m68k: set proper major_num when specifying module param major_num libata: Add NOLPM quirk for SAMSUNG MZ7TE512HMHP-000L1 SSD nvme-pci: fix rapid add remove sequence nvme: lock NS list changes while handling command effects aio: initialize kiocb private in case any filesystems expect it.
2019-02-08Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2-1/+1
An ipvlan bug fix in 'net' conflicted with the abstraction away of the IPV6 specific support in 'net-next'. Similarly, a bug fix for mlx5 in 'net' conflicted with the flow action conversion in 'net-next'. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-07y2038: add 64-bit time_t syscalls to all 32-bit architecturesArnd Bergmann1-0/+20
This adds 21 new system calls on each ABI that has 32-bit time_t today. All of these have the exact same semantics as their existing counterparts, and the new ones all have macro names that end in 'time64' for clarification. This gets us to the point of being able to safely use a C library that has 64-bit time_t in user space. There are still a couple of loose ends to tie up in various areas of the code, but this is the big one, and should be entirely uncontroversial at this point. In particular, there are four system calls (getitimer, setitimer, waitid, and getrusage) that don't have a 64-bit counterpart yet, but these can all be safely implemented in the C library by wrapping around the existing system calls because the 32-bit time_t they pass only counts elapsed time, not time since the epoch. They will be dealt with later. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Catalin Marinas <catalin.marinas@arm.com>
2019-02-07y2038: rename old time and utime syscallsArnd Bergmann2-7/+7
The time, stime, utime, utimes, and futimesat system calls are only used on older architectures, and we do not provide y2038 safe variants of them, as they are replaced by clock_gettime64, clock_settime64, and utimensat_time64. However, for consistency it seems better to have the 32-bit architectures that still use them call the "time32" entry points (leaving the traditional handlers for the 64-bit architectures), like we do for system calls that now require two versions. Note: We used to always define __ARCH_WANT_SYS_TIME and __ARCH_WANT_SYS_UTIME and only set __ARCH_WANT_COMPAT_SYS_TIME and __ARCH_WANT_SYS_UTIME32 for compat mode on 64-bit kernels. Now this is reversed: only 64-bit architectures set __ARCH_WANT_SYS_TIME/UTIME, while we need __ARCH_WANT_SYS_TIME32/UTIME32 for 32-bit architectures and compat mode. The resulting asm/unistd.h changes look a bit counterintuitive. This is only a cleanup patch and it should not change any behavior. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2019-02-07y2038: use time32 syscall names on 32-bitArnd Bergmann1-21/+21
This is the big flip, where all 32-bit architectures set COMPAT_32BIT_TIME and use the _time32 system calls from the former compat layer instead of the system calls that take __kernel_timespec and similar arguments. The temporary redirects for __kernel_timespec, __kernel_itimerspec and __kernel_timex can get removed with this. It would be easy to split this commit by architecture, but with the new generated system call tables, it's easy enough to do it all at once, which makes it a little easier to check that the changes are the same in each table. Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-02-06m68k: set proper major_num when specifying module param major_numChengguang Xu1-3/+7
When calling register_blkdev() with specified major device number, the return code is 0 on success. So it seems not correct direct assign return code to variable major_num in this case. Tested-by: Michael Schmitz <schmitzmic@gmail.com> Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Chengguang Xu <cgxu519@gmx.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-02-04net: phy: fixed-phy: Drop GPIO from fixed_phy_add()Linus Walleij1-1/+1
All users of the fixed_phy_add() pass -1 as GPIO number to the fixed phy driver, and all users of fixed_phy_register() pass -1 as GPIO number as well, except for the device tree MDIO bus. Any new users should create a proper device and pass the GPIO as a descriptor associated with the device so delete the GPIO argument from the calls and drop the code looking requesting a GPIO in fixed_phy_add(). In fixed phy_register(), investigate the "fixed-link" node and pick the GPIO descriptor from "link-gpios" if this property exists. Move the corresponding code out of of_mdio.c as the fixed phy code anyways requires OF to be in use. Tested-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-01arch: unexport asm/shmparam.h for all architecturesMasahiro Yamada2-1/+1
Most architectures do not export shmparam.h to user-space. $ find arch -name shmparam.h | sort arch/alpha/include/asm/shmparam.h arch/arc/include/asm/shmparam.h arch/arm64/include/asm/shmparam.h arch/arm/include/asm/shmparam.h arch/csky/include/asm/shmparam.h arch/ia64/include/asm/shmparam.h arch/mips/include/asm/shmparam.h arch/nds32/include/asm/shmparam.h arch/nios2/include/asm/shmparam.h arch/parisc/include/asm/shmparam.h arch/powerpc/include/asm/shmparam.h arch/s390/include/asm/shmparam.h arch/sh/include/asm/shmparam.h arch/sparc/include/asm/shmparam.h arch/x86/include/asm/shmparam.h arch/xtensa/include/asm/shmparam.h Strangely, some users of the asm-generic wrapper export shmparam.h $ git grep 'generic-y += shmparam.h' arch/c6x/include/uapi/asm/Kbuild:generic-y += shmparam.h arch/h8300/include/uapi/asm/Kbuild:generic-y += shmparam.h arch/hexagon/include/uapi/asm/Kbuild:generic-y += shmparam.h arch/m68k/include/uapi/asm/Kbuild:generic-y += shmparam.h arch/microblaze/include/uapi/asm/Kbuild:generic-y += shmparam.h arch/openrisc/include/uapi/asm/Kbuild:generic-y += shmparam.h arch/riscv/include/asm/Kbuild:generic-y += shmparam.h arch/unicore32/include/uapi/asm/Kbuild:generic-y += shmparam.h The newly added riscv correctly creates the asm-generic wrapper in the kernel space, but the others (c6x, h8300, hexagon, m68k, microblaze, openrisc, unicore32) create the one in the uapi directory. Digging into the git history, now I guess fcc8487d477a ("uapi: export all headers under uapi directories") was the misconversion. Prior to that commit, no architecture exported to shmparam.h As its commit description said, that commit exported shmparam.h for c6x, h8300, hexagon, m68k, openrisc, unicore32. 83f0124ad81e ("microblaze: remove asm-generic wrapper headers") accidentally exported shmparam.h for microblaze. This commit unexports shmparam.h for those architectures. There is no more reason to export include/uapi/asm-generic/shmparam.h, so it has been moved to include/asm-generic/shmparam.h Link: http://lkml.kernel.org/r/1546904307-11124-1-git-send-email-yamada.masahiro@socionext.com Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Stafford Horne <shorne@gmail.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Michal Simek <monstr@monstr.eu> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Nicolas Dichtel <nicolas.dichtel@6wind.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Aurelien Jacquiot <jacquiot.aurelien@gmail.com> Cc: Greentime Hu <green.hu@gmail.com> Cc: Guo Ren <guoren@kernel.org> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi> Cc: Mark Salter <msalter@redhat.com> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Jonas Bonn <jonas@southpole.se> Cc: Vincent Chen <deanbo422@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-01-28Merge 5.0-rc4 into char-misc-nextGreg Kroah-Hartman1-0/+1
We need the char-misc fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-25arch: add pkey and rseq syscall numbers everywhereArnd Bergmann1-0/+4
Most architectures define system call numbers for the rseq and pkey system calls, even when they don't support the features, and perhaps never will. Only a few architectures are missing these, so just define them anyway for consistency. If we decide to add them later to one of these, the system call numbers won't get out of sync then. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
2019-01-25arch: add split IPC system calls where neededArnd Bergmann1-0/+11
The IPC system call handling is highly inconsistent across architectures, some use sys_ipc, some use separate calls, and some use both. We also have some architectures that require passing IPC_64 in the flags, and others that set it implicitly. For the addition of a y2038 safe semtimedop() system call, I chose to only support the separate entry points, but that requires first supporting the regular ones with their own syscall numbers. The IPC_64 is now implied by the new semctl/shmctl/msgctl system calls even on the architectures that require passing it with the ipc() multiplexer. I'm not adding the new semtimedop() or semop() on 32-bit architectures, those will get implemented using the new semtimedop_time64() version that gets added along with the other time64 calls. Three 64-bit architectures (powerpc, s390 and sparc) get semtimedop(). Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2019-01-25m68k: assign syscall number for seccompArnd Bergmann1-0/+1
Most architectures have assigned a numbers for the seccomp syscall even when they do not implement it. m68k is an exception here, so for consistency lets add the number. Unless CONFIG_SECCOMP is implemented, the system call just returns -ENOSYS. Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-01-22m68k: Dispatch nvram_ops calls to Atari or Mac functionsFinn Thain6-17/+108
A multi-platform kernel binary has to decide at run-time how to dispatch the arch_nvram_ops calls. Add a platform-independent arch_nvram_ops struct for this, to replace the atari-specific one. Enable CONFIG_HAVE_ARCH_NVRAM_OPS for Macs. Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Tested-by: Stan Johnson <userm57@yahoo.com> Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-22m68k/mac: Fix PRAM accessorsFinn Thain1-10/+33
PMU-based m68k Macs pre-date PowerMac-style NVRAM. Use the appropriate PMU commands. Also implement the missing XPRAM accessors for VIA-based Macs. Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Tested-by: Stan Johnson <userm57@yahoo.com> Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-22m68k/mac: Use macros for RTC accesses not magic numbersFinn Thain1-18/+41
This is intended to improve code style and not affect code behaviour. Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Tested-by: Stan Johnson <userm57@yahoo.com> Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-22m68k/mac: Adopt naming and calling conventions for PRAM routinesFinn Thain1-38/+23
Adopt the existing *_read_byte and *_write_byte naming convention. Rename via_pram_readbyte and via_pram_writebyte to avoid confusion. Adjust calling conventions of mac_pram_* functions to match the struct nvram_ops methods. Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Tested-by: Stan Johnson <userm57@yahoo.com> Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-22m68k/atari: Implement arch_nvram_ops methods and enable ↵Finn Thain2-0/+25
CONFIG_HAVE_ARCH_NVRAM_OPS Atari RTC NVRAM uses a checksum so implement the remaining arch_nvram_ops methods for the set_checksum and initialize ioctls. Enable CONFIG_HAVE_ARCH_NVRAM_OPS. Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-22m68k/atari: Implement arch_nvram_ops structFinn Thain1-0/+49
By implementing an arch_nvram_ops struct, a platform can re-use the drivers/char/nvram.c module without needing any arch-specific code in that module. Atari does so here. Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-22nvram: Replace nvram_* function exports with static functionsFinn Thain1-36/+3
Replace nvram_* functions with static functions in nvram.h. These will become wrappers for struct nvram_ops method calls. This patch effectively disables existing NVRAM functionality so as to allow the rest of the series to be bisected without build failures. That functionality is gradually re-implemented in subsequent patches. Replace the sole validate-checksum-and-read-byte sequence with a call to nvram_read() which will gain the same semantics in subsequent patches. Remove unused exports. Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-22m68k/atari: Move Atari-specific code out of drivers/char/nvram.cFinn Thain2-0/+245
Move the m68k-specific code out of the driver to make the driver generic. I've used 'SPDX-License-Identifier: GPL-2.0+' for the new file because the old file is covered by MODULE_LICENSE("GPL"). Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-21m68k: Add -ffreestanding to CFLAGSFinn Thain1-1/+4
This patch fixes a build failure when using GCC 8.1: /usr/bin/ld: block/partitions/ldm.o: in function `ldm_parse_tocblock': block/partitions/ldm.c:153: undefined reference to `strcmp' This is caused by a new optimization which effectively replaces a strncmp() call with a strcmp() call. This affects a number of strncmp() call sites in the kernel. The entire class of optimizations is avoided with -fno-builtin, which gets enabled by -ffreestanding. This may avoid possible future build failures in case new optimizations appear in future compilers. I haven't done any performance measurements with this patch but I did count the function calls in a defconfig build. For example, there are now 23 more sprintf() calls and 39 fewer strcpy() calls. The effect on the other libc functions is smaller. If this harms performance we can tackle that regression by optimizing the call sites, ideally using semantic patches. That way, clang and ICC builds might benfit too. Cc: stable@vger.kernel.org Reference: https://marc.info/?l=linux-m68k&m=154514816222244&w=2 Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2019-01-21m68k/apollo: Fix comment in MakefileJonathan Neuschäfer1-1/+1
This comment has been wrong since before git. Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2019-01-21m68k/defconfig: Update defconfigs for v5.0-rc1Geert Uytterhoeven12-36/+24
Actual changes: -CONFIG_IOSCHED_DEADLINE=m -CONFIG_BATMAN_ADV_MCAST=y -# CONFIG_SCSI_MQ_DEFAULT is not set +CONFIG_CRYPTO_ADIANTUM=m +CONFIG_CRYPTO_STREEBOG=m Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2019-01-21m68k/atari: Avoid VLA use in atari_switches_setup()Geert Uytterhoeven1-1/+1
With gcc 7.3.0: arch/m68k/atari/config.c: In function ‘atari_switches_setup’: arch/m68k/atari/config.c:151:2: warning: ISO C90 forbids variable length array ‘switches’ [-Wvla] char switches[strlen(str) + 1]; ^~~~ Replace the variable size by the maximum kernel command line size (256 bytes), which is an upper limit for all suboptions. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2019-01-21m68k: Avoid VLA use in mangle_kernel_stack()Geert Uytterhoeven1-1/+2
With gcc 7.3.0: arch/m68k/kernel/signal.c: In function ‘mangle_kernel_stack’: arch/m68k/kernel/signal.c:654:3: warning: ISO C90 forbids variable length array ‘buf’ [-Wvla] unsigned long buf[fsize / 2]; /* yes, twice as much */ ^~~~~~~~ Replace the variable size by the upper limit, which is 168 bytes. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Arnd Bergmann <arnd@arndb.de>
2019-01-21m68k/mac: Use '030 reset method on SE/30Finn Thain1-14/+4
The comment says that calling the ROM routine doesn't work. But testing shows that the 68030 fall-back reset method does work, so just use that. Tested-by: Stan Johnson <userm57@yahoo.com> Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2019-01-21m68k/mac: Remove obsolete commentFinn Thain1-1/+0
According to The Guide To Mac Family Hardware, this is the correct way to disable the VBL interrupt. The confusing comment here doesn't add any value so remove it. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2019-01-21m68k/mac: Skip VIA port setup unless RTC is connectedFinn Thain1-7/+12
Those Mac models which don't connect their RTC to VIA1 port B probably have something else connected to those pins. Just leave them the way we found them. Make the port B setup conditional on via_type, to match the RTC accessors in arch/m68k/mac/misc.c. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2019-01-21m68k/mac: Clean up unused timer definitionsFinn Thain1-3/+0
Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2019-01-21m68k/defconfig: Drop NET_VENDOR_<FOO>=nGeert Uytterhoeven13-371/+0
Enabling NET_VENDOR_* Kconfig options does not directly affect the kernel, so there is no need to explicitly disable them. The individual network drivers under them are still disabled. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2019-01-06arch: restore generic-y += shmparam.h for some architecturesMasahiro Yamada1-0/+1
For some reasons, I accidentally got rid of "generic-y += shmparam.h" from some architectures. Restore them to fix building c6x, h8300, hexagon, m68k, microblaze, openrisc, and unicore32. Fixes: d6e4b3e326d8 ("arch: remove redundant UAPI generic-y defines") Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-01-06arch: remove redundant UAPI generic-y definesMasahiro Yamada1-19/+0
Now that Kbuild automatically creates asm-generic wrappers for missing mandatory headers, it is redundant to list the same headers in generic-y and mandatory-y. Suggested-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Sam Ravnborg <sam@ravnborg.org>
2019-01-06arch: remove stale comments "UAPI Header export list"Masahiro Yamada1-1/+0
These comments are leftovers of commit fcc8487d477a ("uapi: export all headers under uapi directories"). Prior to that commit, exported headers must be explicitly added to header-y. Now, all headers under the uapi/ directories are exported. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-01-05Merge branch 'akpm' (patches from Andrew)Linus Torvalds4-13/+7
Merge more updates from Andrew Morton: - procfs updates - various misc bits - lib/ updates - epoll updates - autofs - fatfs - a few more MM bits * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (58 commits) mm/page_io.c: fix polled swap page in checkpatch: add Co-developed-by to signature tags docs: fix Co-Developed-by docs drivers/base/platform.c: kmemleak ignore a known leak fs: don't open code lru_to_page() fs/: remove caller signal_pending branch predictions mm/: remove caller signal_pending branch predictions arch/arc/mm/fault.c: remove caller signal_pending_branch predictions kernel/sched/: remove caller signal_pending branch predictions kernel/locking/mutex.c: remove caller signal_pending branch predictions mm: select HAVE_MOVE_PMD on x86 for faster mremap mm: speed up mremap by 20x on large regions mm: treewide: remove unused address argument from pte_alloc functions initramfs: cleanup incomplete rootfs scripts/gdb: fix lx-version string output kernel/kcov.c: mark write_comp_data() as notrace kernel/sysctl: add panic_print into sysctl panic: add options to print system info when panic happens bfs: extra sanity checking and static inode bitmap exec: separate MM_ANONPAGES and RLIMIT_STACK accounting ...
2019-01-04mm: treewide: remove unused address argument from pte_alloc functionsJoel Fernandes (Google)3-12/+6
Patch series "Add support for fast mremap". This series speeds up the mremap(2) syscall by copying page tables at the PMD level even for non-THP systems. There is concern that the extra 'address' argument that mremap passes to pte_alloc may do something subtle architecture related in the future that may make the scheme not work. Also we find that there is no point in passing the 'address' to pte_alloc since its unused. This patch therefore removes this argument tree-wide resulting in a nice negative diff as well. Also ensuring along the way that the enabled architectures do not do anything funky with the 'address' argument that goes unnoticed by the optimization. Build and boot tested on x86-64. Build tested on arm64. The config enablement patch for arm64 will be posted in the future after more testing. The changes were obtained by applying the following Coccinelle script. (thanks Julia for answering all Coccinelle questions!). Following fix ups were done manually: * Removal of address argument from pte_fragment_alloc * Removal of pte_alloc_one_fast definitions from m68k and microblaze. // Options: --include-headers --no-includes // Note: I split the 'identifier fn' line, so if you are manually // running it, please unsplit it so it runs for you. virtual patch @pte_alloc_func_def depends on patch exists@ identifier E2; identifier fn =~ "^(__pte_alloc|pte_alloc_one|pte_alloc|__pte_alloc_kernel|pte_alloc_one_kernel)$"; type T2; @@ fn(... - , T2 E2 ) { ... } @pte_alloc_func_proto_noarg depends on patch exists@ type T1, T2, T3, T4; identifier fn =~ "^(__pte_alloc|pte_alloc_one|pte_alloc|__pte_alloc_kernel|pte_alloc_one_kernel)$"; @@ ( - T3 fn(T1, T2); + T3 fn(T1); | - T3 fn(T1, T2, T4); + T3 fn(T1, T2); ) @pte_alloc_func_proto depends on patch exists@ identifier E1, E2, E4; type T1, T2, T3, T4; identifier fn =~ "^(__pte_alloc|pte_alloc_one|pte_alloc|__pte_alloc_kernel|pte_alloc_one_kernel)$"; @@ ( - T3 fn(T1 E1, T2 E2); + T3 fn(T1 E1); | - T3 fn(T1 E1, T2 E2, T4 E4); + T3 fn(T1 E1, T2 E2); ) @pte_alloc_func_call depends on patch exists@ expression E2; identifier fn =~ "^(__pte_alloc|pte_alloc_one|pte_alloc|__pte_alloc_kernel|pte_alloc_one_kernel)$"; @@ fn(... -, E2 ) @pte_alloc_macro depends on patch exists@ identifier fn =~ "^(__pte_alloc|pte_alloc_one|pte_alloc|__pte_alloc_kernel|pte_alloc_one_kernel)$"; identifier a, b, c; expression e; position p; @@ ( - #define fn(a, b, c) e + #define fn(a, b) e | - #define fn(a, b) e + #define fn(a) e ) Link: http://lkml.kernel.org/r/20181108181201.88826-2-joelaf@google.com Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org> Suggested-by: Kirill A. Shutemov <kirill@shutemov.name> Acked-by: Kirill A. Shutemov <kirill@shutemov.name> Cc: Michal Hocko <mhocko@kernel.org> Cc: Julia Lawall <Julia.Lawall@lip6.fr> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: William Kucharski <william.kucharski@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-01-04fls: change parameter to unsigned intMatthew Wilcox1-1/+1
When testing in userspace, UBSAN pointed out that shifting into the sign bit is undefined behaviour. It doesn't really make sense to ask for the highest set bit of a negative value, so just turn the argument type into an unsigned int. Some architectures (eg ppc) already had it declared as an unsigned int, so I don't expect too many problems. Link: http://lkml.kernel.org/r/20181105221117.31828-1-willy@infradead.org Signed-off-by: Matthew Wilcox <willy@infradead.org> Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: <linux-arch@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-01-03Remove 'type' argument from access_ok() functionLinus Torvalds3-4/+4
Nobody has actually used the type (VERIFY_READ vs VERIFY_WRITE) argument of the user address range verification function since we got rid of the old racy i386-only code to walk page tables by hand. It existed because the original 80386 would not honor the write protect bit when in kernel mode, so you had to do COW by hand before doing any user access. But we haven't supported that in a long time, and these days the 'type' argument is a purely historical artifact. A discussion about extending 'user_access_begin()' to do the range checking resulted this patch, because there is no way we're going to move the old VERIFY_xyz interface to that model. And it's best done at the end of the merge window when I've done most of my merges, so let's just get this done once and for all. This patch was mostly done with a sed-script, with manual fix-ups for the cases that weren't of the trivial 'access_ok(VERIFY_xyz' form. There were a couple of notable cases: - csky still had the old "verify_area()" name as an alias. - the iter_iov code had magical hardcoded knowledge of the actual values of VERIFY_{READ,WRITE} (not that they mattered, since nothing really used it) - microblaze used the type argument for a debug printout but other than those oddities this should be a total no-op patch. I tried to fix up all architectures, did fairly extensive grepping for access_ok() uses, and the changes are trivial, but I may have missed something. Any missed conversion should be trivially fixable, though. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-01-01Merge tag 'rtc-4.21' of ↵Linus Torvalds1-6/+2
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux Pull RTC updates from Alexandre Belloni: "Subsystem: - new %ptR printk format - rename core files - allow registration of multiple nvmem devices New driver: - i.MX system controller RTC Driver updates: - abx80x: handle voltage ioctls, correct binding doc - m41t80: correct month in alarm reads - pcf85363: add pcf85263 support - pcf8523: properly handle battery low flag - s3c: limit alarm to one year in the future as ALMYEAR is broken - sun6i: rework clock output binding" * tag 'rtc-4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (54 commits) rtc: rename core files rtc: nvmem: fix possible use after free rtc: add i.MX system controller RTC support dt-bindings: fsl: scu: add rtc binding rtc: pcf2123: Add Microcrystal rv2123 rtc: class: reimplement devm_rtc_device_register rtc: enforce rtc_timer_init private_data type rtc: abx80x: Implement RTC_VL_READ,CLR ioctls rtc: pcf85363: Add support for NXP pcf85263 rtc dt-bindings: rtc: pcf85363: Document pcf85263 real-time clock rtc: pcf8523: don't return invalid date when battery is low dt-bindings: rtc: use a generic node name for ds1307 PM: Switch to use %ptR m68k/mac: Switch to use %ptR Input: hp_sdc_rtc - Switch to use %ptR rtc: tegra: Switch to use %ptR rtc: s5m: Switch to use %ptR rtc: s3c: Switch to use %ptR rtc: rx8025: Switch to use %ptR rtc: rx6110: Switch to use %ptR ...
2018-12-29Merge tag 'kconfig-v4.21-2' of ↵Linus Torvalds2-13/+1
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kconfig file consolidation from Masahiro Yamada: "Consolidation of bus (PCI, PCMCIA, EISA, RapidIO) config entries by Christoph Hellwig. Currently, every architecture that wants to provide common peripheral busses needs to add some boilerplate code and include the right Kconfig files. This series instead just selects the presence (when needed) and then handles everything in the bus-specific Kconfig file under drivers/" * tag 'kconfig-v4.21-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: pcmcia: remove per-arch PCMCIA config entry eisa: consolidate EISA Kconfig entry in drivers/eisa rapidio: consolidate RAPIDIO config entry in drivers/rapidio pcmcia: allow PCMCIA support independent of the architecture PCI: consolidate the PCI_SYSCALL symbol PCI: consolidate the PCI_DOMAINS and PCI_DOMAINS_GENERIC config options PCI: consolidate PCI config entry in drivers/pci MIPS: remove the HT_PCI config option
2018-12-29Merge tag 'kconfig-v4.21' of ↵Linus Torvalds1-3/+3
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kconfig updates from Masahiro Yamada: - support -y option for merge_config.sh to avoid downgrading =y to =m - remove S_OTHER symbol type, and touch include/config/*.h files correctly - fix file name and line number in lexer warnings - fix memory leak when EOF is encountered in quotation - resolve all shift/reduce conflicts of the parser - warn no new line at end of file - make 'source' statement more strict to take only string literal - rewrite the lexer and remove the keyword lookup table - convert to SPDX License Identifier - compile C files independently instead of including them from zconf.y - fix various warnings of gconfig - misc cleanups * tag 'kconfig-v4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (39 commits) kconfig: surround dbg_sym_flags with #ifdef DEBUG to fix gconf warning kconfig: split images.c out of qconf.cc/gconf.c to fix gconf warnings kconfig: add static qualifiers to fix gconf warnings kconfig: split the lexer out of zconf.y kconfig: split some C files out of zconf.y kconfig: convert to SPDX License Identifier kconfig: remove keyword lookup table entirely kconfig: update current_pos in the second lexer kconfig: switch to ASSIGN_VAL state in the second lexer kconfig: stop associating kconf_id with yylval kconfig: refactor end token rules kconfig: stop supporting '.' and '/' in unquoted words treewide: surround Kconfig file paths with double quotes microblaze: surround string default in Kconfig with double quotes kconfig: use T_WORD instead of T_VARIABLE for variables kconfig: use specific tokens instead of T_ASSIGN for assignments kconfig: refactor scanning and parsing "option" properties kconfig: use distinct tokens for type and default properties kconfig: remove redundant token defines kconfig: rename depends_list to comment_option_list ...
2018-12-28Merge tag 'dma-mapping-4.21' of git://git.infradead.org/users/hch/dma-mappingLinus Torvalds2-2/+1
Pull DMA mapping updates from Christoph Hellwig: "A huge update this time, but a lot of that is just consolidating or removing code: - provide a common DMA_MAPPING_ERROR definition and avoid indirect calls for dma_map_* error checking - use direct calls for the DMA direct mapping case, avoiding huge retpoline overhead for high performance workloads - merge the swiotlb dma_map_ops into dma-direct - provide a generic remapping DMA consistent allocator for architectures that have devices that perform DMA that is not cache coherent. Based on the existing arm64 implementation and also used for csky now. - improve the dma-debug infrastructure, including dynamic allocation of entries (Robin Murphy) - default to providing chaining scatterlist everywhere, with opt-outs for the few architectures (alpha, parisc, most arm32 variants) that can't cope with it - misc sparc32 dma-related cleanups - remove the dma_mark_clean arch hook used by swiotlb on ia64 and replace it with the generic noncoherent infrastructure - fix the return type of dma_set_max_seg_size (Niklas Söderlund) - move the dummy dma ops for not DMA capable devices from arm64 to common code (Robin Murphy) - ensure dma_alloc_coherent returns zeroed memory to avoid kernel data leaks through userspace. We already did this for most common architectures, but this ensures we do it everywhere. dma_zalloc_coherent has been deprecated and can hopefully be removed after -rc1 with a coccinelle script" * tag 'dma-mapping-4.21' of git://git.infradead.org/users/hch/dma-mapping: (73 commits) dma-mapping: fix inverted logic in dma_supported dma-mapping: deprecate dma_zalloc_coherent dma-mapping: zero memory returned from dma_alloc_* sparc/iommu: fix ->map_sg return value sparc/io-unit: fix ->map_sg return value arm64: default to the direct mapping in get_arch_dma_ops PCI: Remove unused attr variable in pci_dma_configure ia64: only select ARCH_HAS_DMA_COHERENT_TO_PFN if swiotlb is enabled dma-mapping: bypass indirect calls for dma-direct vmd: use the proper dma_* APIs instead of direct methods calls dma-direct: merge swiotlb_dma_ops into the dma_direct code dma-direct: use dma_direct_map_page to implement dma_direct_map_sg dma-direct: improve addressability error reporting swiotlb: remove dma_mark_clean swiotlb: remove SWIOTLB_MAP_ERROR ACPI / scan: Refactor _CCA enforcement dma-mapping: factor out dummy DMA ops dma-mapping: always build the direct mapping code dma-mapping: move dma_cache_sync out of line dma-mapping: move various slow path functions out of line ...
2018-12-26Merge tag 'm68k-for-v4.21-tag1' of ↵Linus Torvalds24-1285/+1161
git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k Pull m68k updates from Geert Uytterhoeven: - Generate syscall headers - Small improvements and cleanups - defconfig updates * tag 'm68k-for-v4.21-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k: m68k: Generate uapi header and syscall table header files m68k: Add system call table generation support m68k: Add __NR_syscalls along with NR_syscalls m68k/defconfig: Update defconfigs for v4.20-rc1 m68k: Remove redundant 'default n' from Kconfig m68k: Unroll raw_outsb() loop
2018-12-22treewide: surround Kconfig file paths with double quotesMasahiro Yamada1-3/+3
The Kconfig lexer supports special characters such as '.' and '/' in the parameter context. In my understanding, the reason is just to support bare file paths in the source statement. I do not see a good reason to complicate Kconfig for the room of ambiguity. The majority of code already surrounds file paths with double quotes, and it makes sense since file paths are constant string literals. Make it treewide consistent now. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Wolfram Sang <wsa@the-dreams.de> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Ingo Molnar <mingo@kernel.org>
2018-12-20Merge tag 'm68k-for-v4.20-tag2' of ↵Linus Torvalds2-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k Pull m68k fix from Geert Uytterhoeven: "Fix memblock-related crashes" * tag 'm68k-for-v4.20-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k: m68k: Fix memblock-related crashes