summaryrefslogtreecommitdiffstats
path: root/arch/m68k
AgeCommit message (Collapse)AuthorFilesLines
2012-01-08Merge branch 'pm-for-linus' of ↵Linus Torvalds1-1/+0
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm * 'pm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (76 commits) PM / Hibernate: Implement compat_ioctl for /dev/snapshot PM / Freezer: fix return value of freezable_schedule_timeout_killable() PM / shmobile: Allow the A4R domain to be turned off at run time PM / input / touchscreen: Make st1232 use device PM QoS constraints PM / QoS: Introduce dev_pm_qos_add_ancestor_request() PM / shmobile: Remove the stay_on flag from SH7372's PM domains PM / shmobile: Don't include SH7372's INTCS in syscore suspend/resume PM / shmobile: Add support for the sh7372 A4S power domain / sleep mode PM: Drop generic_subsys_pm_ops PM / Sleep: Remove forward-only callbacks from AMBA bus type PM / Sleep: Remove forward-only callbacks from platform bus type PM: Run the driver callback directly if the subsystem one is not there PM / Sleep: Make pm_op() and pm_noirq_op() return callback pointers PM/Devfreq: Add Exynos4-bus device DVFS driver for Exynos4210/4212/4412. PM / Sleep: Merge internal functions in generic_ops.c PM / Sleep: Simplify generic system suspend callbacks PM / Hibernate: Remove deprecated hibernation snapshot ioctls PM / Sleep: Fix freezer failures due to racy usermodehelper_is_disabled() ARM: S3C64XX: Implement basic power domain support PM / shmobile: Use common always on power domain governor ... Fix up trivial conflict in fs/xfs/xfs_buf.c due to removal of unused XBT_FORCE_SLEEP bit
2012-01-08Merge branch 'for-linus2' of ↵Linus Torvalds2-35/+1
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs * 'for-linus2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (165 commits) reiserfs: Properly display mount options in /proc/mounts vfs: prevent remount read-only if pending removes vfs: count unlinked inodes vfs: protect remounting superblock read-only vfs: keep list of mounts for each superblock vfs: switch ->show_options() to struct dentry * vfs: switch ->show_path() to struct dentry * vfs: switch ->show_devname() to struct dentry * vfs: switch ->show_stats to struct dentry * switch security_path_chmod() to struct path * vfs: prefer ->dentry->d_sb to ->mnt->mnt_sb vfs: trim includes a bit switch mnt_namespace ->root to struct mount vfs: take /proc/*/mounts and friends to fs/proc_namespace.c vfs: opencode mntget() mnt_set_mountpoint() vfs: spread struct mount - remaining argument of next_mnt() vfs: move fsnotify junk to struct mount vfs: move mnt_devname vfs: move mnt_list to struct mount vfs: switch pnode.h macros to struct mount * ...
2012-01-07Merge branch 'driver-core-next' of ↵Linus Torvalds1-4/+5
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core * 'driver-core-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (73 commits) arm: fix up some samsung merge sysdev conversion problems firmware: Fix an oops on reading fw_priv->fw in sysfs loading file Drivers:hv: Fix a bug in vmbus_driver_unregister() driver core: remove __must_check from device_create_file debugfs: add missing #ifdef HAS_IOMEM arm: time.h: remove device.h #include driver-core: remove sysdev.h usage. clockevents: remove sysdev.h arm: convert sysdev_class to a regular subsystem arm: leds: convert sysdev_class to a regular subsystem kobject: remove kset_find_obj_hinted() m86k: gpio - convert sysdev_class to a regular subsystem mips: txx9_sram - convert sysdev_class to a regular subsystem mips: 7segled - convert sysdev_class to a regular subsystem sh: dma - convert sysdev_class to a regular subsystem sh: intc - convert sysdev_class to a regular subsystem power: suspend - convert sysdev_class to a regular subsystem power: qe_ic - convert sysdev_class to a regular subsystem power: cmm - convert sysdev_class to a regular subsystem s390: time - convert sysdev_class to a regular subsystem ... Fix up conflicts with 'struct sysdev' removal from various platform drivers that got changed: - arch/arm/mach-exynos/cpu.c - arch/arm/mach-exynos/irq-eint.c - arch/arm/mach-s3c64xx/common.c - arch/arm/mach-s3c64xx/cpu.c - arch/arm/mach-s5p64x0/cpu.c - arch/arm/mach-s5pv210/common.c - arch/arm/plat-samsung/include/plat/cpu.h - arch/powerpc/kernel/sysfs.c and fix up cpu_is_hotpluggable() as per Greg in include/linux/cpu.h
2012-01-06Merge branch 'for-linus' of ↵Linus Torvalds31-628/+577
git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k: (21 commits) m68k/mac: Make CONFIG_HEARTBEAT unavailable on Mac m68k/serial: Remove references to obsolete serial config options m68k/net: Remove obsolete IRQ_FLG_* users m68k: Don't comment out syscalls used by glibc m68k/atari: Move declaration of atari_SCC_reset_done to header file m68k/serial: Remove references to obsolete CONFIG_SERIAL167 m68k/hp300: Export hp300_ledstate m68k: Initconst section fixes m68k/mac: cleanup macro case mac_scsi: fix mac_scsi on some powerbooks m68k/mac: fix powerbook 150 adb_type m68k/mac: fix baboon irq disable and shutdown m68k/mac: oss irq fixes m68k/mac: fix nubus slot irq disable and shutdown m68k/mac: enable via_alt_mapping on performa 580 m68k/mac: cleanup forward declarations m68k/mac: cleanup mac_irq_pending m68k/mac: cleanup mac_clear_irq m68k/mac: early console m68k/mvme16x: Add support for EARLY_PRINTK ... Fix up trivial conflict in arch/m68k/Kconfig.debug due to new EARLY_PRINTK config option addition clashing with movement of the BOOTPARAM options.
2012-01-06Merge branch 'for-next' of ↵Linus Torvalds74-701/+2004
git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu: (56 commits) m68k: allow ColdFire 547x and 548x CPUs to be built with MMU enabled m68k/Kconfig: Separate classic m68k and coldfire early m68k: add ColdFire with MMU enabled support to the m68k mem init code m68k: do not use m68k startup or interrupt code for ColdFire CPUs m68k: add ColdFire FPU support for the V4e ColdFire CPUs m68k: adjustments to stack frame for ColdFire with MMU enabled m68k: use non-MMU linker script for ColdFire MMU builds m68k: ColdFire with MMU enabled uses same clocking code as non-MMU m68k: add code to setup a ColdFire 54xx platform when MMU enabled m68k: use non-MMU entry.S code when compiling for ColdFire CPU m68k: create ColdFire MMU pgalloc code m68k: compile appropriate mm arch files for ColdFire MMU support m68k: ColdFire V4e MMU paging init code and miss handler m68k: use ColdFire MMU read/write bit flags when ioremapping m68k: modify cache push and clear code for ColdFire with MMU enable m68k: use tracehook_report_syscall_entry/exit for ColdFire MMU ptrace path m68k: ColdFire V4e MMU context support code m68k: MMU enabled ColdFire needs 8k ELF alignment m68k: set ColdFire MMU page size m68k: define PAGE_OFFSET_RAW for ColdFire CPU with MMU enabled ...
2012-01-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds1-0/+3
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1958 commits) net: pack skb_shared_info more efficiently net_sched: red: split red_parms into parms and vars net_sched: sfq: extend limits cnic: Improve error recovery on bnx2x devices cnic: Re-init dev->stats_addr after chip reset net_sched: Bug in netem reordering bna: fix sparse warnings/errors bna: make ethtool_ops and strings const xgmac: cleanups net: make ethtool_ops const vmxnet3" make ethtool ops const xen-netback: make ops structs const virtio_net: Pass gfp flags when allocating rx buffers. ixgbe: FCoE: Add support for ndo_get_fcoe_hbainfo() call netdev: FCoE: Add new ndo_get_fcoe_hbainfo() call igb: reset PHY after recovering from PHY power down igb: add basic runtime PM support igb: Add support for byte queue limits. e1000: cleanup CE4100 MDIO registers access e1000: unmap ce4100_gbe_mdio_base_virt in e1000_remove ...
2012-01-06Merge branch 'timers-core-for-linus' of ↵Linus Torvalds5-16/+5
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip * 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86, tsc: Skip TSC synchronization checks for tsc=reliable clocksource: Convert tcb_clksrc to use clocksource_register_hz/khz clocksource: cris: Convert to clocksource_register_khz clocksource: xtensa: Convert to clocksource_register_hz/khz clocksource: um: Convert to clocksource_register_hz/khz clocksource: parisc: Convert to clocksource_register_hz/khz clocksource: m86k: Convert to clocksource_register_hz/khz time: x86: Replace LATCH with PIT_LATCH in i8253 clocksource driver time: x86: Remove CLOCK_TICK_RATE from acpi_pm clocksource driver time: x86: Remove CLOCK_TICK_RATE from mach_timer.h time: x86: Remove CLOCK_TICK_RATE from tsc code time: Fix spelling mistakes in new comments time: fix bogus comment in timekeeping_get_ns_raw
2012-01-06Merge branch 'driver-core-next' into Linux 3.2Greg Kroah-Hartman1-4/+5
This resolves the conflict in the arch/arm/mach-s3c64xx/s3c6400.c file, and it fixes the build error in the arch/x86/kernel/microcode_core.c file, that the merge did not catch. The microcode_core.c patch was provided by Stephen Rothwell <sfr@canb.auug.org.au> who was invaluable in the merge issues involved with the large sysdev removal process in the driver-core tree. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-04m68k/mac: Make CONFIG_HEARTBEAT unavailable on MacGeert Uytterhoeven1-2/+2
mac_heartbeat() was never really implemented. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Greg Ungerer <gerg@uclinux.org>
2012-01-03consolidate a bunch of ipcbuf.h instancesAl Viro1-29/+1
... some still remain weird :-/ Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-03consolidate umode_t declarationsAl Viro1-6/+0
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-12-30m68k: allow ColdFire 547x and 548x CPUs to be built with MMU enabledGreg Ungerer1-2/+2
The ColdFire 547x and 548x CPUs have internal MMU hardware. All code to support this is now in, so we can build kernels with it enabled. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Matt Waddel <mwaddel@yahoo.com> Acked-by: Kurt Mahan <kmahan@xmission.com>
2011-12-30m68k/Kconfig: Separate classic m68k and coldfire earlyGeert Uytterhoeven2-28/+42
While you can build multiplatform kernels for machines with classic m68k processors, you cannot mix support for classic m68k and coldfire processors. To avoid such hybrid kernels, introduce CONFIG_M68KCLASSIC as an antipole for CONFIG_COLDFIRE, and make all specific processor support depend on one of them. All classic m68k machine support also needs to depend on this. The defaults (CONFIG_M68KCLASSIC if MMU, CONFIG_COLDFIRE if !MMU) are chosen such to make most of the existing configs build and work. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-12-30m68k: add ColdFire with MMU enabled support to the m68k mem init codeGreg Ungerer1-1/+1
The ColdFire has similar setup requirements to the SUN3 code, so we use that. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Matt Waddel <mwaddel@yahoo.com> Acked-by: Kurt Mahan <kmahan@xmission.com>
2011-12-30m68k: do not use m68k startup or interrupt code for ColdFire CPUsGreg Ungerer1-3/+11
The ColdFire CPUs have their own startup and interrupt code (in the platform/coldfire directory), and do not use the general m68k startup and interrupt code. In fact the use of the arch/m68k/kernel/head.o is not about CONFIG_MMU or not, it is really about the machine type we are compiling for. Modify the selection and use of head.o to be based on the machine type. Only select the local ints.o and vectors.o code if we are using the classic 68k CPU types (that use the conventional Morotola MMU or SUN3 MMU). Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Matt Waddel <mwaddel@yahoo.com> Acked-by: Kurt Mahan <kmahan@xmission.com>
2011-12-30m68k: add ColdFire FPU support for the V4e ColdFire CPUsGreg Ungerer4-66/+184
The V4e ColdFire CPU family also has an integrated FPU (as well as the MMU). So add code to support this hardware along side the existing m68k FPU code. The ColdFire FPU is of course different to all previous 68k FP units. It is close in operation to the 68060, but not completely compatible. The biggest issue to deal with is that the ColdFire FPU multi-move instructions are different. It does not support multi-moving the FP control registers, and the multi-move of the FP data registers uses a different instruction mnemonic. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Matt Waddel <mwaddel@yahoo.com> Acked-by: Kurt Mahan <kmahan@xmission.com>
2011-12-30m68k: adjustments to stack frame for ColdFire with MMU enabledGreg Ungerer1-2/+15
The exception return stack adjustment required by ColdFire when running with the MMU enabled is not completely identical to 680x0 processors. Specifically the format type 4 stack frame doesn't need any stack adjustment on exception return. And the ColdFire always must return with a frame type of 4, not 0. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Matt Waddel <mwaddel@yahoo.com> Acked-by: Kurt Mahan <kmahan@xmission.com>
2011-12-30m68k: use non-MMU linker script for ColdFire MMU buildsGreg Ungerer2-1/+9
Use the non-MMU linker script for ColdFire builds when we are building for MMU enabled. The image layout is correct for loading on existing ColdFire dev boards. The only addition required to the current non-MMU linker script is to add support for the fixup section. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Matt Waddel <mwaddel@yahoo.com> Acked-by: Kurt Mahan <kmahan@xmission.com>
2011-12-30m68k: ColdFire with MMU enabled uses same clocking code as non-MMUGreg Ungerer2-2/+2
We want to use the same timer support code for ColdFire CPU's when running with MMU enabled or not. So use the same time_no.c code even when the MMU is enabled for ColdFire. This also means we do not want CONFIG_ARCH_USES_GETTIMEOFFSET set, since that code is only in time_mm.c. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Matt Waddel <mwaddel@yahoo.com> Acked-by: Kurt Mahan <kmahan@xmission.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-12-30m68k: add code to setup a ColdFire 54xx platform when MMU enabledGreg Ungerer1-1/+7
We use the same setup code for ColdFire MMU enabled platforms as standard m68k. So add support for it to setup our 54xx ColdFire platforms. They do not support the same bootinfo parsing as other m68k platforms. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Matt Waddel <mwaddel@yahoo.com> Acked-by: Kurt Mahan <kmahan@xmission.com>
2011-12-30m68k: use non-MMU entry.S code when compiling for ColdFire CPUGreg Ungerer1-1/+1
No matter whether we are configured for non-MMU or MMU enabled if we are compiling for ColdFire CPU we always use the entry_no.S code. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Matt Waddel <mwaddel@yahoo.com> Acked-by: Kurt Mahan <kmahan@xmission.com>
2011-12-30m68k: create ColdFire MMU pgalloc codeGreg Ungerer2-1/+105
Add code to support the ColdFire V4e MMU pgalloc functions. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Matt Waddel <mwaddel@yahoo.com> Acked-by: Kurt Mahan <kmahan@xmission.com>
2011-12-30m68k: compile appropriate mm arch files for ColdFire MMU supportGreg Ungerer2-4/+9
Create a config symbol to enable when using a ColdFire MMU. We then use that to only compile the necessary arch mm files. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Matt Waddel <mwaddel@yahoo.com> Acked-by: Kurt Mahan <kmahan@xmission.com>
2011-12-30m68k: ColdFire V4e MMU paging init code and miss handlerGreg Ungerer2-0/+200
The different ColdFire V4e MMU requires its own dedicated paging init code, and a TLB miss handler for its software driven TLB. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Matt Waddel <mwaddel@yahoo.com> Acked-by: Kurt Mahan <kmahan@xmission.com>
2011-12-30m68k: use ColdFire MMU read/write bit flags when ioremappingGreg Ungerer2-1/+3
The ColdFire MMU has separate read and write bits, unlike the Motorola m68k MMU which has a single read-only bit. Define a _PAGE_READWRITE value for the Motorola MMU, which is 0, so we can unconditionaly include that in the page table entry bits when setting up ioremapped pages. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Matt Waddel <mwaddel@yahoo.com> Acked-by: Kurt Mahan <kmahan@xmission.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-12-30m68k: modify cache push and clear code for ColdFire with MMU enableGreg Ungerer1-2/+6
The cache push and clear code only need to flush the branch cache on the write-through cache setup of the ColdFire V4e with MMU enabled. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Matt Waddel <mwaddel@yahoo.com> Acked-by: Kurt Mahan <kmahan@xmission.com>
2011-12-30m68k: use tracehook_report_syscall_entry/exit for ColdFire MMU ptrace pathGreg Ungerer1-0/+18
The existing ColdFire code (which is all non-mmu) for system call entry and exit uses the more modern tracehook_report_syscall_entry()/exit() into the ptrace code. Now that we are supporting ColdFire with MMU we need the same hooks for these. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Matt Waddel <mwaddel@yahoo.com> Acked-by: Kurt Mahan <kmahan@xmission.com>
2011-12-30m68k: ColdFire V4e MMU context support codeGreg Ungerer2-49/+211
Add code to manage the context's of the ColdFire V4e MMU. This code is mostly taken from the Freescale 2.6.35 kernel BSP for MMU enabled ColdFire. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Matt Waddel <mwaddel@yahoo.com> Acked-by: Kurt Mahan <kmahan@xmission.com>
2011-12-30m68k: MMU enabled ColdFire needs 8k ELF alignmentGreg Ungerer1-3/+3
Like the SUN3 hardware MMU the ColdFire MMU uses 8k pages. So we want our ELF page size alingment to also be 8k. Modify the ELF alignment setting. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Matt Waddel <mwaddel@yahoo.com> Acked-by: Kurt Mahan <kmahan@xmission.com>
2011-12-30m68k: set ColdFire MMU page sizeGreg Ungerer1-3/+3
We use the ColdFire V4e MMU page size of 8KiB. Define PAGE_SHIFT appropriately. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Matt Waddel <mwaddel@yahoo.com> Acked-by: Kurt Mahan <kmahan@xmission.com>
2011-12-30m68k: define PAGE_OFFSET_RAW for ColdFire CPU with MMU enabledGreg Ungerer1-6/+4
The ColdFire CPU configurations need PAGE_OFFSET_RAW set to the base of their RAM. It doesn't matter if they are running with the MMU enabled or disabled, it is always set to the base of RAM. We can keep the choices simple here and key of CONFIG_RAMBASE. If it is defined we are on a plaftorm (ColdFire or other non-MMU systems) which have a configurable RAM base, just use it. Reported-by: Alexander Stein <alexander.stein@systec-electronic.com> Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Matt Waddel <mwaddel@yahoo.com> Acked-by: Kurt Mahan <kmahan@xmission.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-12-30m68k: add TLB flush support for the ColdFire V4e MMU hardwareGreg Ungerer1-6/+17
The ColdFire V4e MMU is unlike any of the other m68k MMU hardware. It needs its own TLB flush support code. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Matt Waddel <mwaddel@yahoo.com> Acked-by: Kurt Mahan <kmahan@xmission.com>
2011-12-30m68k: modify ColdFire 54xx cache support for MMU enabledGreg Ungerer1-1/+31
Modify the cache setup for the ColdFire 54xx parts when running with the MMU enabled. We want to map the peripheral register space (MBAR region) as non cacheable. And create an identity mapping for all of RAM for the kernel. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Matt Waddel <mwaddel@yahoo.com> Acked-by: Kurt Mahan <kmahan@xmission.com>
2011-12-30m68k: add cache support for V4e ColdFire cores running with MMU enabledGreg Ungerer2-8/+104
Add code to deal with instruction, data and branch caches of the V4e ColdFire cores when they are running with the MMU enabled. This code is loosely based on Freescales changes for the caches of the V4e ColdFire in the 2.6.25 kernel BSP. That code was originally by Kurt Mahan <kmahan@freescale.com> (now <kmahan@xmission.com>). Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Matt Waddel <mwaddel@yahoo.com> Acked-by: Kurt Mahan <kmahan@xmission.com>
2011-12-30m68k: add ColdFire paging exception handling codeGreg Ungerer1-0/+104
Add code to traps.c to handle MMU exceptions for the ColdFire. Most of this code is from the 2.6.25 kernel BSP code released by Freescale. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Matt Waddel <mwaddel@yahoo.com> Acked-by: Kurt Mahan <kmahan@xmission.com>
2011-12-30m68k: add page table size definitions for ColdFire V4e MMUGreg Ungerer1-6/+24
Define the page table size and attributes for the ColdFire V4e MMU. Also setup the vmalloc and kmap regions we will use. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Matt Waddel <mwaddel@yahoo.com> Acked-by: Kurt Mahan <kmahan@xmission.com>
2011-12-30m68k: page table support definitions and code for ColdFire MMUGreg Ungerer1-0/+425
The ColdFire V4e MMU is nothing like any of the other m68k MMU's. So we need to create a set of definitions and support routines for the kernels paging functions. This is largely taken from Freescales BSP code for this (though it was a 2.6.25 kernel). I have cleaned it up alot from the original. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Matt Waddel <mwaddel@yahoo.com> Acked-by: Kurt Mahan <kmahan@xmission.com>
2011-12-30m68k: set register a2 to current if MMU enabled on ColdFireGreg Ungerer3-2/+17
Virtual memory m68k systems build with register a2 dedicated to being the current proc pointer (non-MMU don't do this). Add code to the ColdFire interrupt and exception processing to set this on entry, and at context switch time. We use the same GET_CURRENT() macro that MMU enabled code uses - modifying it so that the assembler is ColdFire clean. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Matt Waddel <mwaddel@yahoo.com> Acked-by: Kurt Mahan <kmahan@xmission.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-12-30m68k: add ColdFire 54xx CPU MMU memory init codeGreg Ungerer3-3/+51
Add code to the 54xx ColdFire CPU init to setup memory ready for the m68k paged memory start up. Some of the RAM variables that were specific to the non-mmu code paths now need to be used during this setup, so when CONFIG_MMU is enabled. Move these out of page_no.h and into page.h. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Matt Waddel <mwaddel@yahoo.com> Acked-by: Kurt Mahan <kmahan@xmission.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-12-30m68k: init the MMU hardware for the 54xx ColdFireGreg Ungerer1-1/+46
The 54xx ColdFire CPU family has an internal MMU. Up to now though we have only supported running on them with the MMU disabled. Add code to the 54xx ColdFire init sequence to initialize the bootmem used by the usual MMU m68k code for paging init. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Matt Waddel <mwaddel@yahoo.com> Acked-by: Kurt Mahan <kmahan@xmission.com>
2011-12-30m68k: use addr_limit checking for m68k CPUs that do no support address spacesGreg Ungerer2-14/+19
The ColdFire CPU family, and the original 68000, do not support separate address spaces like the other 680x0 CPU types. Modify the set_fs()/get_fs() functions and macros to use a thread_info addr_limit for address space checking. This is pretty much what all other architectures that do not support separate setable address spaces do. Signed-off-by: Alexander Stein <alexander.stein@systec-electronic.com> Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Matt Waddel <mwaddel@yahoo.com> Acked-by: Kurt Mahan <kmahan@xmission.com>
2011-12-30m68k: modify user space access functions to support ColdFire CPUsGreg Ungerer5-26/+49
Modify the user space access functions to support the ColdFire V4e cores running with MMU enabled. The ColdFire processors do not support the "moves" instruction used by the traditional 680x0 processors for moving data into and out of another address space. They only support the notion of a single address space, and you use the usual "move" instruction to access that. Create a new config symbol (CONFIG_CPU_HAS_ADDRESS_SPACES) to mark the CPU types that support separate address spaces, and thus also support the sfc/dfc registers and the "moves" instruction that go along with that. The code is almost identical for user space access, so lets just use a define to choose either the "move" or "moves" in the assembler code. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Matt Waddel <mwaddel@yahoo.com> Acked-by: Kurt Mahan <kmahan@xmission.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-12-30m68k: add TASK definitions for ColdFires running with MMUGreg Ungerer1-6/+10
Add appropriate TASK_SIZE and TASK_UNMAPPED_BASE definitions for running on ColdFire V4e cores with MMU enabled. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Matt Waddel <mwaddel@yahoo.com> Acked-by: Kurt Mahan <kmahan@xmission.com>
2011-12-30m68k: make interrupt definitions conditional on correct CPU typesGreg Ungerer1-2/+3
The interrupt handling support defines and code is not so much conditional on an MMU being present (CONFIG_MMU), as it is on which type of CPU we are building for. So make the code conditional on the CPU types instead. The current irq.h is mostly specific to the interrupt code for the 680x0 CPUs, so it should only be used for them. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Matt Waddel <mwaddel@yahoo.com> Acked-by: Kurt Mahan <kmahan@xmission.com>
2011-12-30m68k: definitions for the ColdFire V4e MMU hardwareGreg Ungerer1-0/+110
Basic register level definitions to support the internal MMU of the V4e ColdFire cores. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Matt Waddel <mwaddel@yahoo.com> Acked-by: Kurt Mahan <kmahan@xmission.com>
2011-12-30m68k: show ColdFire CPU/FPU/MMU typeGreg Ungerer1-0/+8
Update the show_cpuinfo() code to display info about ColdFire cores. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Matt Waddel <mwaddel@yahoo.com> Acked-by: Kurt Mahan <kmahan@xmission.com>
2011-12-30m68k: add machine and CPU definitions for ColdFire coresGreg Ungerer1-0/+14
Create machine and CPU definitions to support the ColdFire CPU family members that have a virtual memory management unit. The ColdFire V4e core contains an MMU, and it is quite different to any other 68k family members. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Matt Waddel <mwaddel@yahoo.com> Acked-by: Kurt Mahan <kmahan@xmission.com>
2011-12-30m68knommu: remove no longer used rom_length from Palm/Pilot start up codeGreg Ungerer1-3/+0
Compiling for the m68knommu/68328 Palm/Pilot target you get: LD vmlinux arch/m68k/platform/68328/head.o: In function `L3': (.text+0x170): undefined reference to `rom_length' "rom_length" is not used any longer by any of the m68knommu code. So remove it from here too. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-12-30m68knommu: fix broken boot logo inclusionGreg Ungerer6-37/+9
Compiling for the m68knommu/68328 Palm/Pilot target you get: AS arch/m68k/platform/68328/head-pilot.o arch/m68k/platform/68328/head-pilot.S:37:23: fatal error: bootlogo.rh: No such file or directory The build for this target used to do a conversion on a C coded boot logo and include this in the head assembler code. This got broken by changes to the local Makefile. Clean all this up by just including the C coded boot logo struct in the C code. With the appropriate alignment attribute there is no difference to the way it can be used. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-12-28m68k/serial: Remove references to obsolete serial config optionsGeert Uytterhoeven6-49/+4
- ATARI_MFPSER, ATARI_MIDI, MULTIFACE_III_TTY, and DN_SERIAL have no corresponding drivers (anymore), - Clean up SERIAL_CONSOLE dependencies and help text. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-10 09:26:38 +0000